Since the onset of v5 superblocks, the LSN of the last modification has
been included in a variety of on-disk data structures. This LSN is used
to provide log recovery ordering guarantees (e.g., to ensure an older
log recovery item is not replayed over a newer target data structure).
While this works correctly from the point a filesystem is formatted and
mounted, userspace tools have some problematic behaviors that defeat
this mechanism. For example, xfs_repair historically zeroes out the log
unconditionally (regardless of whether corruption is detected). If this
occurs, the LSN of the filesystem is reset and the log is now in a
problematic state with respect to on-disk metadata structures that might
have a larger LSN. Until either the log catches up to the highest
previously used metadata LSN or each affected data structure is modified
and written out without incident (which resets the metadata LSN), log
recovery is susceptible to filesystem corruption.
This problem is ultimately addressed and repaired in the associated
userspace tools. The kernel is still responsible to detect the problem
and notify the user that something is wrong. Check the superblock LSN at
mount time and fail the mount if it is invalid. From that point on,
trigger verifier failure on any metadata I/O where an invalid LSN is
detected. This results in a filesystem shutdown and guarantees that we
do not log metadata changes with invalid LSNs on disk. Since this is a
known issue with a known recovery path, present a warning to instruct
the user how to recover.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Log recovery occurs in two phases at mount time. In the first phase,
EFIs and EFDs are processed and potentially cancelled out. EFIs without
EFD objects are inserted into the AIL for processing and recovery in the
second phase. xfs_mountfs() runs various other operations between the
phases and is thus subject to failure. If failure occurs after the first
phase but before the second, pending EFIs sit on the AIL, pin it and
cause the mount to hang.
Update the mount sequence to ensure that pending EFIs are cancelled in
the event of failure. Add a recovery cancellation mechanism to iterate
the AIL and cancel all EFI items when requested. Plumb cancellation
support through the log mount finish helper and update xfs_mountfs() to
invoke cancellation in the event of failure after recovery has started.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Compared to char pointers this saves us a lot of casting effort. Also
add another local variable to make the code easier to read.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Embed a kobject into the xfs log data structure (xlog). This creates a
'log' subdirectory for every XFS mount instance in sysfs. The lifecycle
of the log kobject is tied to the lifecycle of the log.
Also define a set of generic attribute handlers associated with the log
kobject in preparation for the addition of attributes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_trans.h has a dependency on xfs_log.h for a couple of
structures. Most code that does transactions doesn't need to know
anything about the log, but this dependency means that they have to
include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header
files and clean up the includes to be in dependency order.
In doing this, remove the direct include of xfs_trans_reserve.h from
xfs_trans.h so that we remove the dependency between xfs_trans.h and
xfs_mount.h. Hence the xfs_trans.h include can be moved to the
indicate the actual dependencies other header files have on it.
Note that these are kernel only header files, so this does not
translate to any userspace changes at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Recent analysis of a deadlocked XFS filesystem from a kernel
crash dump indicated that the filesystem was stuck waiting for log
space. The short story of the hang on the RHEL6 kernel is this:
- the tail of the log is pinned by an inode
- the inode has been pushed by the xfsaild
- the inode has been flushed to it's backing buffer and is
currently flush locked and hence waiting for backing
buffer IO to complete and remove it from the AIL
- the backing buffer is marked for write - it is on the
delayed write queue
- the inode buffer has been modified directly and logged
recently due to unlinked inode list modification
- the backing buffer is pinned in memory as it is in the
active CIL context.
- the xfsbufd won't start buffer writeback because it is
pinned
- xfssyncd won't force the log because it sees the log as
needing to be covered and hence wants to issue a dummy
transaction to move the log covering state machine along.
Hence there is no trigger to force the CIL to the log and hence
unpin the inode buffer and therefore complete the inode IO, remove
it from the AIL and hence move the tail of the log along, allowing
transactions to start again.
Mainline kernels also have the same deadlock, though the signature
is slightly different - the inode buffer never reaches the delayed
write lists because xfs_buf_item_push() sees that it is pinned and
hence never adds it to the delayed write list that the xfsaild
flushes.
There are two possible solutions here. The first is to simply force
the log before trying to cover the log and so ensure that the CIL is
emptied before we try to reserve space for the dummy transaction in
the xfs_log_worker(). While this might work most of the time, it is
still racy and is no guarantee that we don't get stuck in
xfs_trans_reserve waiting for log space to come free. Hence it's not
the best way to solve the problem.
The second solution is to modify xfs_log_need_covered() to be aware
of the CIL. We only should be attempting to cover the log if there
is no current activity in the log - covering the log is the process
of ensuring that the head and tail in the log on disk are identical
(i.e. the log is clean and at idle). Hence, by definition, if there
are items in the CIL then the log is not at idle and so we don't
need to attempt to cover it.
When we don't need to cover the log because it is active or idle, we
issue a log force from xfs_log_worker() - if the log is idle, then
this does nothing. However, if the log is active due to there being
items in the CIL, it will force the items in the CIL to the log and
unpin them.
In the case of the above deadlock scenario, instead of
xfs_log_worker() getting stuck in xfs_trans_reserve() attempting to
cover the log, it will instead force the log, thereby unpinning the
inode buffer, allowing IO to be issued and complete and hence
removing the inode that was pinning the tail of the log from the
AIL. At that point, everything will start moving along again. i.e.
the xfs_log_worker turns back into a watchdog that can alleviate
deadlocks based around pinned items that prevent the tail of the log
from being moved...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The xc_cil_lock is used for two purposes - to protect the CIL
itself, and to protect the push/commit state and lists. These are
two logically separate structures and operations, so can have their
own locks. This means that pushing on the CIL and the commit wait
ordering won't contend for a lock with other transactions that are
completing concurrently. As the CIL insertion is the hottest path
throught eh CIL, this is a big win.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The on-disk format definitions for the log are spread randoms
through a couple of header files. Consolidate it all in a single
file that can be shared easily with userspace. This means that
xfs_log.h and xfs_log_priv.h no longer need to be shared with
userspace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There is no more users of this Macro, so it's time to kill it dead.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Not a bug as such, just warning noise from the xlog_cksum()
returning a __be32 type when it should be returning a __le32 type.
On Wed, Nov 28, 2012 at 08:30:59AM -0500, Christoph Hellwig wrote:
> But why are we storing the crc field little endian while all other on
> disk formats are big endian? (And yes I realize it might as well have
> been me who did that back in the idea, but I still have no idea why)
Because the CRC always returns the calcuation LE format, even on BE
systems. So rather than always having to byte swap it everywhere and
have all the force casts and anootations for sparse, it seems simpler to
just make it a __le32 everywhere....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Implement CRCs for the log buffers. We re-use a field in
struct xlog_rec_header that was used for a weak checksum of the
log buffer payload in debug builds before.
The new checksumming uses the crc32c checksum we will use elsewhere
in XFS, and also protects the record header and addition cycle data.
Due to this there are some interesting changes in xlog_sync, as we
need to do the cycle wrapping for the split buffer case much earlier,
as we would touch the buffer after generating the checksum otherwise.
The CRC calculation is always enabled, even for non-CRC filesystems,
as adding this CRC does not change the log format. On non-CRC
filesystems, only issue an alert if a CRC mismatch is found and
allow recovery to continue - this will act as an indicator that
log recovery problems are a result of log corruption. On CRC enabled
filesystems, however, log recovery will fail.
Note that existing debug kernels will write a simple checksum value
to the log, so the first time this is run on a filesystem taht was
last used on a debug kernel it will through CRC mismatch warning
errors. These can be ignored.
Initially based on a patch from Dave Chinner, then modified
significantly by Christoph Hellwig. Modified again by Dave Chinner
to get to this version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The only thing the periodic sync work does now is flush the AIL and
idle the log. These are really functions of the log code, so move
the work to xfs_log.c and rename it appropriately.
The only wart that this leaves behind is the xfssyncd_centisecs
sysctl, otherwise the xfssyncd is dead. Clean up any comments that
related to xfssyncd to reflect it's passing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Remove the xlog_t type definitions.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Rename the XFS log structure to xlog to help crash distinquish it from the
other logs in Linux.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Doing background CIL flushes adds significant latency to whatever
async transaction that triggers it. To avoid blocking async
transactions on things like waiting for log buffer IO to complete,
move the CIL push off into a workqueue. By moving the push work
into a workqueue, we remove all the latency that the commit adds
from the foreground transaction commit path. This also means that
single threaded workloads won't do the CIL push procssing, leaving
them more CPU to do more async transactions.
To do this, we need to keep track of the sequence number we have
pushed work for. This avoids having many transaction commits
attempting to schedule work for the same sequence, and ensures that
we only ever have one push (background or forced) in progress at a
time. It also means that we don't need to take the CIL lock in write
mode to check for potential background push races, which reduces
lock contention.
To avoid potential issues with "smart" IO schedulers, don't use the
workqueue for log force triggered flushes. Instead, do them directly
so that the log IO is done directly by the process issuing the log
force and so doesn't get stuck on IO elevator queue idling
incorrectly delaying the log IO from the workqueue.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Split the log regrant case out of xfs_log_reserve into a separate function,
and merge xlog_grant_log_space and xlog_regrant_write_log_space into their
respective callers. Also replace the XFS_LOG_PERM_RESERV flag, which easily
got misused before the previous cleanups with a simple boolean parameter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Add a new data structure to allow sharing code between the log grant and
regrant code.
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The tic->t_wait waitqueues can never have more than a single waiter
on them, so we can easily replace them with a task_struct pointer
and wake_up_process.
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Currently xfs_log_move_tail has a tail_lsn argument that is horribly
overloaded: it may contain either an actual lsn to assign to the log tail,
0 as a special case to use the last sync LSN, or 1 to indicate that no tail
LSN assignment should be performed, and we should opportunisticly wake up
at one task waiting for log space even if we did not move the LSN.
Remove the tail lsn assigned from xfs_log_move_tail and make the two callers
use xlog_assign_tail_lsn instead of the current variant of partially using
the code in xfs_log_move_tail and partially opencoding it. Note that means
we grow an addition lock roundtrip on the AIL lock for each bulk update
or delete, which is still far less than what we had before introducing the
bulk operations. If this proves to be a problem we can still add a variant
of xlog_assign_tail_lsn that expects the lock to be held already.
Also rename the remainder of xfs_log_move_tail to xfs_log_space_wake as
that name describes its functionality much better.
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Update the extent tree in case we have to reuse a busy extent, so that it
always is kept uptodate. This is done by replacing the busy list searches
with a new xfs_alloc_busy_reuse helper, which updates the busy extent tree
in case of a reuse. This allows us to allow reusing metadata extents
unconditionally, and thus avoid log forces especially for allocation btree
blocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: use proper interfaces for on-stack plugging
xfs: fix xfs_debug warnings
xfs: fix variable set but not used warnings
xfs: convert log tail checking to a warning
xfs: catch bad block numbers freeing extents.
xfs: push the AIL from memory reclaim and periodic sync
xfs: clean up code layout in xfs_trans_ail.c
xfs: convert the xfsaild threads to a workqueue
xfs: introduce background inode reclaim work
xfs: convert ENOSPC inode flushing to use new syncd workqueue
xfs: introduce a xfssyncd workqueue
xfs: fix extent format buffer allocation size
xfs: fix unreferenced var error in xfs_buf.c
Also, applied patch from Tony Luck that fixes ia64:
xfs_destroy_workqueues() should not be tagged with__exit
in the branch before merging.
On the Power platform, the log tail debug checks fire excessively
causing the system to panic early in testing. The debug checks are
known to be racy, though on x86_64 there is no evidence that they
trigger at all.
We want to keep the checks active on debug systems to alert us to
problems with log space accounting, but we need to reduce the impact
of a racy check on testing on the Power platform.
As a result, convert the ASSERT conditions to warnings, and
allow them to fire only once per filesystem mount. This will prevent
false positives from interfering with testing, whilst still
providing us with the indication that they may be a problem with log
space accounting should that occur.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Convert the xfs log operations to use the new error logging
interfaces. This removes the xlog_{warn,panic} wrappers and makes
almost all errors emit the device they belong to instead of just
refering to "XFS".
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The only thing that the grant lock remains to protect is the grant head
manipulations when adding or removing space from the log. These calculations
are already based on atomic variables, so we can already update them safely
without locks. However, the grant head manpulations require atomic multi-step
calculations to be executed, which the algorithms currently don't allow.
To make these multi-step calculations atomic, convert the algorithms to
compare-and-exchange loops on the atomic variables. That is, we sample the old
value, perform the calculation and use atomic64_cmpxchg() to attempt to update
the head with the new value. If the head has not changed since we sampled it,
it will succeed and we are done. Otherwise, we rerun the calculation again from
a new sample of the head.
This allows us to remove the grant lock from around all the grant head space
manipulations, and that effectively removes the grant lock from the log
completely. Hence we can remove the grant lock completely from the log at this
point.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The log grant ticket wait queues are currently protected by the log
grant lock. However, the queues are functionally independent from
each other, and operations on them only require serialisation
against other queue operations now that all of the other log
variables they use are atomic values.
Hence, we can make them independent of the grant lock by introducing
new locks just to protect the lists operations. because the lists
are independent, we can use a lock per list and ensure that reserve
and write head queuing do not contend.
To ensure forced shutdowns work correctly in conjunction with the
new fast paths, ensure that we check whether the log has been shut
down in the grant functions once we hold the relevant spin locks but
before we go to sleep. This is needed to co-ordinate correctly with
the wakeups that are issued on the ticket queues so we don't leave
any processes sleeping on the queues during a shutdown.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Convert the log grant heads to atomic64_t types in preparation for
converting the accounting algorithms to atomic operations. his patch
just converts the variables; the algorithmic changes are in a
separate patch for clarity.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
log->l_tail_lsn is currently protected by the log grant lock. The
lock is only needed for serialising readers against writers, so we
don't really need the lock if we make the l_tail_lsn variable an
atomic. Converting the l_tail_lsn variable to an atomic64_t means we
can start to peel back the grant lock from various operations.
Also, provide functions to safely crack an atomic LSN variable into
it's component pieces and to recombined the components into an
atomic variable. Use them where appropriate.
This also removes the need for explicitly holding a spinlock to read
the l_tail_lsn on 32 bit platforms.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
log->l_last_sync_lsn is updated in only one critical spot - log
buffer Io completion - and is protected by the grant lock here. This
requires the grant lock to be taken for every log buffer IO
completion. Converting the l_last_sync_lsn variable to an atomic64_t
means that we do not need to take the grant lock in log buffer IO
completion to update it.
This also removes the need for explicitly holding a spinlock to read
the l_last_sync_lsn on 32 bit platforms.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The log grant queues are one of the few places left using sv_t
constructs for waiting. Given we are touching this code, we should
convert them to plain wait queues. While there, convert all the
other sv_t users in the log code as well.
Seeing as this removes the last users of the sv_t type, remove the
header file defining the wrapper and the fragments that still
reference it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Prepare for switching the grant heads to atomic variables by
combining the two 32 bit values that make up the grant head into a
single 64 bit variable. Provide wrapper functions to combine and
split the grant heads appropriately for calculations and use them as
necessary.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The grant write and reserve queues use a roll-your-own double linked
list, so convert it to a standard list_head structure and convert
all the list traversals to use list_for_each_entry(). We can also
get rid of the XLOG_TIC_IN_Q flag as we can use the list_empty()
check to tell if the ticket is in a list or not.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
I have been seeing occasional pauses in transaction throughput up to
30s long under heavy parallel workloads. The only notable thing was
that the xfsaild was trying to be active during the pauses, but
making no progress. It was running exactly 20 times a second (on the
50ms no-progress backoff), and the number of pushbuf events was
constant across this time as well. IOWs, the xfsaild appeared to be
stuck on buffers that it could not push out.
Further investigation indicated that it was trying to push out inode
buffers that were pinned and/or locked. The xfsbufd was also getting
woken at the same frequency (by the xfsaild, no doubt) to push out
delayed write buffers. The xfsbufd was not making any progress
because all the buffers in the delwri queue were pinned. This scan-
and-make-no-progress dance went one in the trace for some seconds,
before the xfssyncd came along an issued a log force, and then
things started going again.
However, I noticed something strange about the log force - there
were way too many IO's issued. 516 log buffers were written, to be
exact. That added up to 129MB of log IO, which got me very
interested because it's almost exactly 25% of the size of the log.
He delayed logging code is suppose to aggregate the minimum of 25%
of the log or 8MB worth of changes before flushing. That's what
really puzzled me - why did a log force write 129MB instead of only
8MB?
Essentially what has happened is that no CIL pushes had occurred
since the previous tail push which cleared out 25% of the log space.
That caused all the new transactions to block because there wasn't
log space for them, but they kick the xfsaild to push the tail.
However, the xfsaild was not making progress because there were
buffers it could not lock and flush, and the xfsbufd could not flush
them because they were pinned. As a result, both the xfsaild and the
xfsbufd could not move the tail of the log forward without the CIL
first committing.
The cause of the problem was that the background CIL push, which
should happen when 8MB of aggregated changes have been committed, is
being held off by the concurrent transaction commit load. The
background push does a down_write_trylock() which will fail if there
is a concurrent transaction commit holding the push lock in read
mode. With 8 CPUs all doing transactions as fast as they can, there
was enough concurrent transaction commits to hold off the background
push until tail-pushing could no longer free log space, and the halt
would occur.
It should be noted that there is no reason why it would halt at 25%
of log space used by a single CIL checkpoint. This bug could
definitely violate the "no transaction should be larger than half
the log" requirement and hence result in corruption if the system
crashed under heavy load. This sort of bug is exactly the reason why
delayed logging was tagged as experimental....
The fix is to start blocking background pushes once the threshold
has been exceeded. Rework the threshold calculations to keep the
amount of log space a CIL checkpoint can use to below that of the
AIL push threshold to avoid the problem completely.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Delayed logging adds some serialisation to the log force process to
ensure that it does not deference a bad commit context structure
when determining if a CIL push is necessary or not. It does this by
grabing the CIL context lock exclusively, then dropping it before
pushing the CIL if necessary. This causes serialisation of all log
forces and pushes regardless of whether a force is necessary or not.
As a result fsync heavy workloads (like dbench) can be significantly
slower with delayed logging than without.
To avoid this penalty, copy the current sequence from the context to
the CIL structure when they are swapped. This allows us to do
unlocked checks on the current sequence without having to worry
about dereferencing context structures that may have already been
freed. Hence we can remove the CIL context locking in the forcing
code and only call into the push code if the current context matches
the sequence we need to force.
By passing the sequence into the push code, we can check the
sequence again once we have the CIL lock held exclusive and abort if
the sequence has already been pushed. This avoids a lock round-trip
and unnecessary CIL pushes when we have racing push calls.
The result is that the regression in dbench performance goes away -
this change improves dbench performance on a ramdisk from ~2100MB/s
to ~2500MB/s. This compares favourably to not using delayed logging
which retuns ~2500MB/s for the same workload.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If we let the CIL grow without bound, it will grow large enough to violate
recovery constraints (must be at least one complete transaction in the log at
all times) or take forever to write out through the log buffers. Hence we need
a check during asynchronous transactions as to whether the CIL needs to be
pushed.
We track the amount of log space the CIL consumes, so it is relatively simple
to limit it on a pure size basis. Make the limit the minimum of just under half
the log size (recovery constraint) or 8MB of log space (which is an awful lot
of metadata).
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
The delayed logging code only changes in-memory structures and as
such can be enabled and disabled with a mount option. Add the mount
option and emit a warning that this is an experimental feature that
should not be used in production yet.
We also need infrastructure to track committed items that have not
yet been written to the log. This is what the Committed Item List
(CIL) is for.
The log item also needs to be extended to track the current log
vector, the associated memory buffer and it's location in the Commit
Item List. Extend the log item and log vector structures to enable
this tracking.
To maintain the current log format for transactions with delayed
logging, we need to introduce a checkpoint transaction and a context
for tracking each checkpoint from initiation to transaction
completion. This includes adding a log ticket for tracking space
log required/used by the context checkpoint.
To track all the changes we need an io vector array per log item,
rather than a single array for the entire transaction. Using the new
log vector structure for this requires two passes - the first to
allocate the log vector structures and chain them together, and the
second to fill them out. This log vector chain can then be passed
to the CIL for formatting, pinning and insertion into the CIL.
Formatting of the log vector chain is relatively simple - it's just
a loop over the iovecs on each log vector, but it is made slightly
more complex because we re-write the iovec after the copy to point
back at the memory buffer we just copied into.
This code also needs to pin log items. If the log item is not
already tracked in this checkpoint context, then it needs to be
pinned. Otherwise it is already pinned and we don't need to pin it
again.
The only other complexity is calculating the amount of new log space
the formatting has consumed. This needs to be accounted to the
transaction in progress, and the accounting is made more complex
becase we need also to steal space from it for log metadata in the
checkpoint transaction. Calculate all this at insert time and update
all the tickets, counters, etc correctly.
Once we've formatted all the log items in the transaction, attach
the busy extents to the checkpoint context so the busy extents live
until checkpoint completion and can be processed at that point in
time. Transactions can then be freed at this point in time.
Now we need to issue checkpoints - we are tracking the amount of log space
used by the items in the CIL, so we can trigger background checkpoints when the
space usage gets to a certain threshold. Otherwise, checkpoints need ot be
triggered when a log synchronisation point is reached - a log force event.
Because the log write code already handles chained log vectors, writing the
transaction is trivial, too. Construct a transaction header, add it
to the head of the chain and write it into the log, then issue a
commit record write. Then we can release the checkpoint log ticket
and attach the context to the log buffer so it can be called during
Io completion to complete the checkpoint.
We also need to allow for synchronising multiple in-flight
checkpoints. This is needed for two things - the first is to ensure
that checkpoint commit records appear in the log in the correct
sequence order (so they are replayed in the correct order). The
second is so that xfs_log_force_lsn() operates correctly and only
flushes and/or waits for the specific sequence it was provided with.
To do this we need a wait variable and a list tracking the
checkpoint commits in progress. We can walk this list and wait for
the checkpoints to change state or complete easily, an this provides
the necessary synchronisation for correct operation in both cases.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
The ticket ID is needed to uniquely identify transactions when doing busy
extent matching. Delayed logging changes the lifecycle of busy extents with
respect to the transaction structure lifecycle. Hence we can no longer use
the transaction structure as a means of determining the owner of the busy
extent as it may be freed and reused while the busy extent is still active.
This commit provides the infrastructure to access the xlog_tid_t held in the
ticket from a transaction handle. This avoids the need for callers to peek
into the transaction and log structures to find this out.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
There remains only one user of the l_sectbb_mask field in the log
structure. Just kill it off and compute the mask where needed from
the power-of-2 sector size.
(Only update from last post is to accomodate the changes in the
previous patch in the series.)
Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Change struct log so it keeps track of the size (in basic blocks) of
a log sector in l_sectBBsize rather than the log-base-2 of that
value (previously, l_sectbb_log). The name was chosen for
consistency with the other fields in the structure that represent
a number of basic blocks.
(Updated so that a variable used in computing and verifying a log's
sector size is named "log2_size". Also added the "BB" to the
structure field name, based on feedback from Eric Sandeen. Also
dropped some superfluous parentheses.)
Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Replace the awkward xlog_write_adv_cnt with an inline helper that makes
it more obvious that it's modifying it's paramters, and replace the use
of an integer type for "ptr" with a real void pointer. Also move
xlog_write_adv_cnt to xfs_log_priv.h as it will be used outside of
xfs_log.c in the delayed logging series.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Just minor housekeeping, a lot more functions can be trivially made
static; others could if we reordered things a bit...
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
Convert the old xfs tracing support that could only be used with the
out of tree kdb and xfsidbg patches to use the generic event tracer.
To use it make sure CONFIG_EVENT_TRACING is enabled and then enable
all xfs trace channels by:
echo 1 > /sys/kernel/debug/tracing/events/xfs/enable
or alternatively enable single events by just doing the same in one
event subdirectory, e.g.
echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable
or set more complex filters, etc. In Documentation/trace/events.txt
all this is desctribed in more detail. To reads the events do a
cat /sys/kernel/debug/tracing/trace
Compared to the last posting this patch converts the tracing mostly to
the one tracepoint per callsite model that other users of the new
tracing facility also employ. This allows a very fine-grained control
of the tracing, a cleaner output of the traces and also enables the
perf tool to use each tracepoint as a virtual performance counter,
allowing us to e.g. count how often certain workloads git various
spots in XFS. Take a look at
http://lwn.net/Articles/346470/
for some examples.
Also the btree tracing isn't included at all yet, as it will require
additional core tracing features not in mainline yet, I plan to
deliver it later.
And the really nice thing about this patch is that it actually removes
many lines of code while adding this nice functionality:
fs/xfs/Makefile | 8
fs/xfs/linux-2.6/xfs_acl.c | 1
fs/xfs/linux-2.6/xfs_aops.c | 52 -
fs/xfs/linux-2.6/xfs_aops.h | 2
fs/xfs/linux-2.6/xfs_buf.c | 117 +--
fs/xfs/linux-2.6/xfs_buf.h | 33
fs/xfs/linux-2.6/xfs_fs_subr.c | 3
fs/xfs/linux-2.6/xfs_ioctl.c | 1
fs/xfs/linux-2.6/xfs_ioctl32.c | 1
fs/xfs/linux-2.6/xfs_iops.c | 1
fs/xfs/linux-2.6/xfs_linux.h | 1
fs/xfs/linux-2.6/xfs_lrw.c | 87 --
fs/xfs/linux-2.6/xfs_lrw.h | 45 -
fs/xfs/linux-2.6/xfs_super.c | 104 ---
fs/xfs/linux-2.6/xfs_super.h | 7
fs/xfs/linux-2.6/xfs_sync.c | 1
fs/xfs/linux-2.6/xfs_trace.c | 75 ++
fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++
fs/xfs/linux-2.6/xfs_vnode.h | 4
fs/xfs/quota/xfs_dquot.c | 110 ---
fs/xfs/quota/xfs_dquot.h | 21
fs/xfs/quota/xfs_qm.c | 40 -
fs/xfs/quota/xfs_qm_syscalls.c | 4
fs/xfs/support/ktrace.c | 323 ---------
fs/xfs/support/ktrace.h | 85 --
fs/xfs/xfs.h | 16
fs/xfs/xfs_ag.h | 14
fs/xfs/xfs_alloc.c | 230 +-----
fs/xfs/xfs_alloc.h | 27
fs/xfs/xfs_alloc_btree.c | 1
fs/xfs/xfs_attr.c | 107 ---
fs/xfs/xfs_attr.h | 10
fs/xfs/xfs_attr_leaf.c | 14
fs/xfs/xfs_attr_sf.h | 40 -
fs/xfs/xfs_bmap.c | 507 +++------------
fs/xfs/xfs_bmap.h | 49 -
fs/xfs/xfs_bmap_btree.c | 6
fs/xfs/xfs_btree.c | 5
fs/xfs/xfs_btree_trace.h | 17
fs/xfs/xfs_buf_item.c | 87 --
fs/xfs/xfs_buf_item.h | 20
fs/xfs/xfs_da_btree.c | 3
fs/xfs/xfs_da_btree.h | 7
fs/xfs/xfs_dfrag.c | 2
fs/xfs/xfs_dir2.c | 8
fs/xfs/xfs_dir2_block.c | 20
fs/xfs/xfs_dir2_leaf.c | 21
fs/xfs/xfs_dir2_node.c | 27
fs/xfs/xfs_dir2_sf.c | 26
fs/xfs/xfs_dir2_trace.c | 216 ------
fs/xfs/xfs_dir2_trace.h | 72 --
fs/xfs/xfs_filestream.c | 8
fs/xfs/xfs_fsops.c | 2
fs/xfs/xfs_iget.c | 111 ---
fs/xfs/xfs_inode.c | 67 --
fs/xfs/xfs_inode.h | 76 --
fs/xfs/xfs_inode_item.c | 5
fs/xfs/xfs_iomap.c | 85 --
fs/xfs/xfs_iomap.h | 8
fs/xfs/xfs_log.c | 181 +----
fs/xfs/xfs_log_priv.h | 20
fs/xfs/xfs_log_recover.c | 1
fs/xfs/xfs_mount.c | 2
fs/xfs/xfs_quota.h | 8
fs/xfs/xfs_rename.c | 1
fs/xfs/xfs_rtalloc.c | 1
fs/xfs/xfs_rw.c | 3
fs/xfs/xfs_trans.h | 47 +
fs/xfs/xfs_trans_buf.c | 62 -
fs/xfs/xfs_vnodeops.c | 8
70 files changed, 2151 insertions(+), 2592 deletions(-)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
A lot more functions could be made static, but they need
forward declarations; this does some easy ones, and also
found a few unused functions in the process.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Most callers of xlog_bread need to call xlog_align to get the actual offset.
Consolidate that call into the main xlog_bread and provide a _xlog_bread
for those few that don't want the actual offset.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Just another set of types obsfucating the code, remove them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Move all fields from xlog_iclog_fields_t into xlog_in_core_t instead of having
them in a substructure and the using #defines to make it look like they were
directly in xlog_in_core_t. Also document that xlog_in_core_2_t is grossly
misnamed, and make all references to it typesafe.
(First sent on Semptember 15th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
When an I/O error occurs during an intermediate commit on a rolling
transaction, xfs_trans_commit() will free the transaction structure
and the related ticket. However, the duplicate transaction that
gets used as the transaction continues still contains a pointer
to the ticket. Hence when the duplicate transaction is cancelled
and freed, we free the ticket a second time.
Add reference counting to the ticket so that we hold an extra
reference to the ticket over the transaction commit. We drop the
extra reference once we have checked that the transaction commit
did not return an error, thus avoiding a double free on commit
error.
Credit to Nick Piggin for tripping over the problem.
SGI-PV: 989741
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When we need to go from the log to the AIL, we have to go via the
xfs_mount. Add a xfs_ail pointer to the log so we can go directly to the
AIL associated with the log.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32351a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Brian Foster