Commit Graph

9 Commits

Author SHA1 Message Date
Paul Mundt e2fcf74f3d sh: nommu: use 32-bit phys mode.
The nommu code has regressed somewhat in that 29BIT gets set for the
SH-2/2A configs regardless of the fact that they are really 32BIT sans
MMU or PMB. This does a bit of tidying to get nommu properly selecting
32BIT as it was before.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-04 12:32:24 +09:00
Paul Mundt 2efa53b269 sh: Make 29/32-bit mode check helper generally available.
Presently __in_29bit_mode() is only defined for the PMB case, but
it's also easily derived from the CONFIG_29BIT and CONFIG_32BIT &&
CONFIG_PMB=n cases.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20 16:40:48 +09:00
Paul Mundt 206582c316 sh: Make all PxSEGADDR() calls fatal for non-legacy configs.
This stubs out all of the PxSEGADDR() wrappers for non-legacy code.
29-bit will continue to work with these, while 32-bit code will now blow
up on compile rather than at runtime.

The vast majority of the in-tree offenders are gone, with the only
remaining culprits being unable to support 32-bit mode.

Hopefully this will prevent anyone from ever using these again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-13 18:45:12 +09:00
Paul Mundt a0ab36689a sh: fixed PMB mode refactoring.
This introduces some much overdue chainsawing of the fixed PMB support.
fixed PMB was introduced initially to work around the fact that dynamic
PMB mode was relatively broken, though they were never intended to
converge. The main areas where there are differences are whether the
system is booted in 29-bit mode or 32-bit mode, and whether legacy
mappings are to be preserved. Any system booting in true 32-bit mode will
not care about legacy mappings, so these are roughly decoupled.

Regardless of the entry point, PMB and 32BIT are directly related as far
as the kernel is concerned, so we also switch back to having one select
the other.

With legacy mappings iterated through and applied in the initialization
path it's now possible to finally merge the two implementations and
permit dynamic remapping overtop of remaining entries regardless of
whether boot mappings are crafted by hand or inherited from the boot
loader.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-13 18:31:48 +09:00
Matt Fleming 1f69b6af91 sh: Prepare for dynamic PMB support
To allow the MMU to be switched between 29bit and 32bit mode at runtime
some constants need to swapped for functions that return a runtime
value.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:51:12 +09:00
Matt Fleming 8bd642b17b sh: Obliterate the P1 area macros
Replace the use of PHYSADDR() with __pa(). PHYSADDR() is based on the
idea that all addresses in P1SEG are untranslated, so we can access an
address's physical page as an offset from P1SEG. This doesn't work for
CONFIG_PMB/CONFIG_PMB_FIXED because pages in P1SEG and P2SEG are used
for PMB mappings and so can be translated to any physical address.

Likewise, replace a P1SEGADDR() use with virt_to_phys().

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:51:02 +09:00
Yoshihiro Shimoda 2f47f44790 sh: Support fixed 32-bit PMB mappings from bootloader.
This provides a method for supporting fixed PMB mappings inherited from
the bootloader, as an alternative to the dynamic PMB mapping currently
used by the kernel. In the future these methods will be combined.

P1/P2 area is handled like a regular 29-bit physical address, and local
bus device are assigned P3 area addresses.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10 15:49:54 +09:00
Magnus Damm 716777db72 sh: P4 ioremap pass-through
This patch adds a pass-through case when ioremapping P4 addresses.

Addresses passed to ioremap() should be physical addresses, so the
best option is usually to convert the virtual address to a physical
address before calling ioremap. This will give you a virtual address
in P2 which matches the physical address and this works well for
most internal hardware blocks on the SuperH architecture.

However, some hardware blocks must be accessed through P4. Converting
the P4 address to a physical and then back to a P2 does not work. One
example of this is the sh7722 TMU block, it must be accessed through P4.

Without this patch P4 addresses will be mapped using PTEs which
requires the page allocator to be up and running.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:48 +09:00
Paul Mundt f15cbe6f1a sh: migrate to arch/sh/include/
This follows the sparc changes a439fe51a1.

Most of the moving about was done with Sam's directions at:

http://marc.info/?l=linux-sh&m=121724823706062&w=2

with subsequent hacking and fixups entirely my fault.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 08:09:44 +09:00