Commit Graph

9792 Commits

Author SHA1 Message Date
Christian Dietrich 1e68752877 V4L/DVB: drivers/media/video: Remove dead CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE
CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE doesn't exist in Kconfig and is never defined anywhere
else, therefore removing all references for it from the source code.

Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 16:42:54 -03:00
Joe Perches abf84383ec V4L/DVB: drivers/media: Remove unnecessary casts of private_data
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 16:42:53 -03:00
Jean-François Moine 1676e4ab55 V4L/DVB: gspca - sq930x: Add some comments for sensor mt9v111
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 16:42:52 -03:00
Jean-François Moine ef35d34fea V4L/DVB: gspca - vc032x: Add trace of USB exchanges
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 16:42:51 -03:00
Jean-François Moine fe854ec07c V4L/DVB: gspca - vc032x: Stop the USB exchanges on error
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 16:42:50 -03:00
Jean-François Moine 98475cb642 V4L/DVB: gspca - vc032x: Add some comments
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 16:42:49 -03:00
Jean-François Moine f7059eaa28 V4L/DVB: gspca - main: Don't use the frame buffer flags
This patch fixes possible race conditions in queue management with SMP:
when a frame was completed, the irq function tried to use the next frame
buffer. At this time, it was possible that the application on an other
processor updated the frame pointer, making the image to point to a bad
buffer.
The patch contains two main changes:
- the image transfer uses the queue indexes which are protected against
  simultaneous memory access,
- the image pointer which is used for image concatenation is only set at
  interrupt level.
Some subdrivers which used the image pointer have been updated.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 16:42:48 -03:00
Jean-François Moine 02bbcb9d86 V4L/DVB: gspca - main: Possible race condition in queue management
The problem may occur with SMP:
- a frame is completed at interrupt level (in gspca_frame_add with
  packet_type == LAST_PACKET,
- just after clearing the bit V4L2_BUF_FLAG_QUEUED and before setting
  the bit V4L2_BUF_FLAG_DONE, on the other processor, the application
  tries to requeue the same frame buffer,
- then, the qbuf function succeeds because ALL_FLAGS are not set.
The fix sets and resets the two flags in one instruction.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 16:42:47 -03:00
Christoph Egger 9059cd4440 V4L/DVB: remove obsolete conditionalizing on DVB_DIBCOM_DEBUG
As pointed by Christoph Egger <siccegge@stud.informatik.uni-erlangen.de>,

The config Option DVB_DIBCOM_DEBUG was dropped while removing the dibusb
driver in favor of dvb-usb in 2005. However it remaind existant at some
places of the kernel config.

Instead of just removing the debug capability, the better is to just remove
the bad dependency, making the modprobe function always visible.

Thanks-to: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 16:42:46 -03:00
Ben Hutchings 7638699c25 V4L/DVB: lgs8gxx: remove firmware for lgs8g75
The recently added support for lgs8g75 included some 8051 machine code
without accompanying source code.  Replace this with use of the
firmware loader.

Compile-tested only.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 16:42:45 -03:00
Tobias Lorenz 73c994e4fb V4L/DVB: si470x: -EINVAL overwritten in si470x_vidioc_s_tuner()
This patch to the si470x_vidioc_s_tuner function was developed in
cooperation with Roel Kluin <roel.kluin@gmail.com>. It sets the default
retval to 0 instead of -EINVAL, identical to what is done in all other
set/get functions of v4l2_ioctl_ops. This is just as cosmetic change, as
retval is directly overwritten by the si470x_disconnect_check() anyway.

Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 16:42:44 -03:00
Jarod Wilson 22b0766b62 V4L/DVB: IR/mceusb: more streamlining of device init
Spent a while last night getting device initialization packet captures
under Windows for all generations of devices. There are a few places
where we were doing things differently, and few things we were doing
that we don't need to do, particularly on gen3 hardware, and I *think*
one of those things is what was locking up my pinnacle hw from time to
time -- at least, its been perfectly well behaved every time its been
plugged in since making this change.

First up, we're adding a bit more to the gen1 init routine here. Its
not absolutely necessary, the hardware works the same both with and
without it, but I'd like to be consistent w/Windows here.

Second, DEVICE_RESET is never called when initializing either of my
gen3 devices, its only called for gen1 and gen2. The bits in the gen3
init after removing that, are safe (and interesting) to run on all
hardware, so there's no more gen3-specific init done, there's instead
a generic mceusb_get_parameters() that is run for all hardware.

Third, the gen3 flag isn't needed. We only care if hardware is gen3
during probe, so I've dropped that from the device flags struct.

Successfully tested on all three generations of mceusb hardware.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 16:42:43 -03:00
Mauro Carvalho Chehab ca17a4f0bf V4L/DVB: IR/mceusb: remove unused vars from gen1 init
Prior init unification/simplification patch made these unused, forgot
to remove them, so this silences:

drivers/media/IR/mceusb.c: In function ‘mceusb_gen1_init’:
drivers/media/IR/mceusb.c:769: warning: unused variable ‘partial’
drivers/media/IR/mceusb.c:768: warning: unused variable ‘i’

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 16:42:42 -03:00
Arnd Bergmann 044e5878c2 V4L/DVB: lirc: use unlocked_ioctl
New code should not rely on the big kernel lock,
so use the unlocked_ioctl file operation in lirc.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 16:42:22 -03:00
Randy Dunlap f9839da051 V4L/DVB: IR: jvc-decoder needs BITREVERSE
ir-jvc-decoder uses bitreverse interfaces, so it should select
BITREVERSE.

ir-jvc-decoder.c:(.text+0x550bc): undefined reference to `byte_rev_table'
ir-jvc-decoder.c:(.text+0x550c6): undefined reference to `byte_rev_table'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:36:32 -03:00
Jarod Wilson 69c271f33b V4L/DVB: IR/lirc_dev: fix locking in lirc_dev_fop_read
On Wed, Jul 07, 2010 at 02:52:58PM +0200, Jiri Slaby wrote:
> Hi,
>
> stanse found a locking error in lirc_dev_fop_read:
> if (mutex_lock_interruptible(&ir->irctl_lock))
>   return -ERESTARTSYS;
> ...
> while (written < length && ret == 0) {
>   if (mutex_lock_interruptible(&ir->irctl_lock)) {    #1
>     ret = -ERESTARTSYS;
>     break;
>   }
>   ...
> }
>
> remove_wait_queue(&ir->buf->wait_poll, &wait);
> set_current_state(TASK_RUNNING);
> mutex_unlock(&ir->irctl_lock);                        #2
>
> If lock at #1 fails, it beaks out of the loop, with the lock unlocked,
> but there is another "unlock" at #2.

This should do the trick. Completely untested beyond compiling, but its
not exactly a complicated fix, and in practice, I'm not aware of anyone
ever actually tripping that locking bug, so there's zero functional change
in typical use here.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:36:23 -03:00
Anatolij Gustschin 1bb6419433 V4L/DVB: v4l2-dev: fix memory leak
Since commit b402843787
the 'driver_data' field resides in device's struct device_private
which may be allocated by dev_set_drvdata() if device_private
struct was not allocated previously.

dev_set_drvdata() is used in video_set_drvdata() to set
the driver's private data pointer in v4l2 drivers. Setting
the private data _before_ registering the v4l2 device results
in a memory leak since __video_register_device() also calls
video_set_drvdata(), but after zeroing the device structure.
Thus, the reference to the previously allocated device_private
struct goes lost and a new device_private will be allocated.

All v4l drivers which call video_set_drvdata() _before_
calling video_register_device() are affected. The patch fixes
__video_register_device() to preserve previously allocated
device_private reference.

Caught by kmemleak.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:36:02 -03:00
Guillaume Audirac 2030c0325a V4L/DVB: dvb_frontend: fix typos in comments and one function
Signed-off-by: Guillaume Audirac <guillaume.audirac@webag.fr>
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:35:51 -03:00
Guillaume Audirac 82751f5679 V4L/DVB: tda10048: clear the uncorrected packet registers when saturated
Use the register CLUNC to reset the CPTU registers (LSB & MSB) when they
saturate at 0xFFFF. Fixes as well a few register typos.

Signed-off-by: Guillaume Audirac <guillaume.audirac@webag.fr>
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:35:39 -03:00
Guillaume Audirac 10ea89d03f V4L/DVB: tda10048: fix bitmask for the transmission mode
Add a missing bit for reading the transmission mode (2K/8K) in
tda10048_get_tps

Signed-off-by: Guillaume Audirac <guillaume.audirac@webag.fr>
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:35:26 -03:00
Guillaume Audirac 814522394c V4L/DVB: tda10048: fix the uncomplete function tda10048_read_ber
Completes the bit-error-rate read function with the CBER register (before
Viterbi decoder). The returned value is 1e8*actual_ber to be positive.
Also includes some typo mistakes.

Signed-off-by: Guillaume Audirac <guillaume.audirac@webag.fr>
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:35:13 -03:00
Kusanagi Kouichi e38030f3ff V4L/DVB: cx23885: Enable Message Signaled Interrupts(MSI)
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:34:59 -03:00
Jarod Wilson b48592e496 V4L/DVB: IR/mceusb: unify and simplify different gen device init
Started out as an effort to try to tackle the last remaining issue I'm
having with this damned pinnacle device getting wedged the first time
its plugged in after an indeterminate length of not being plugged in.
Didn't get that solved yet, but did streamline the init code a bit more
and remove some superfluous gunk. Nukes a completely unneeded call to
usb_device_init() and several lines of overly complex crap in the gen1
device init path.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:34:49 -03:00
Anatolij Gustschin 95c5d605ca V4L/DVB: v4l: Add MPC5121e VIU video capture driver
Adds support for Video-In (VIU) unit of Freescale
MPC5121e. The driver supports RGB888/RGB565 formats,
capture and overlay on MPC5121e DIU frame buffer.

Signed-off-by: Hongjun Chen <hong-jun.chen@freescale.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:34:44 -03:00
Laurent Pinchart 2bb00fe633 V4L/DVB: uvcvideo: Add support for Manta MM-353 Plako
The camera requires the PROBE_MINMAX quirk. Add a corresponding entry
in the device IDs list

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:34:30 -03:00
Laurent Pinchart b30ece5394 V4L/DVB: uvcvideo: Don't use stack-based buffers for USB transfers
Data buffers on the stack are not allowed for USB I/O. Use dynamically
allocated buffers instead when querying control length and control
capabilities.

The control capabilities are now also stored in the uvc_control
structure.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:34:10 -03:00
Laurent Pinchart 1b4e21c4f6 V4L/DVB: uvcvideo: Define control information bits using macros
Use the macros instead of hardcoding numerical constants for the
controls information bitfield.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:33:55 -03:00
Laurent Pinchart 561474c2d2 V4L/DVB: uvcvideo: Support menu controls in the control mapping API
The UVCIOC_CTRL_MAP ioctl doesn't support menu entries for menu
controls. As the uvc_xu_control_mapping structure has no reserved
fields, this can't be fixed while keeping ABI compatibility.

Modify the UVCIOC_CTRL_MAP ioctl to add menu entries support, and define
UVCIOC_CTRL_MAP_OLD that supports the old ABI without any ability to add
menu controls.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:33:39 -03:00
Hans de Goede 3653639e5d V4L/DVB: uvcvideo: Make button controls work properly
According to the v4l2 spec, writing any value to a button control should
result in the action belonging to the button control being triggered.
UVC cams however want to see a 1 written, this patch fixes this by
overriding whatever value user space passed in with -1 (0xffffffff) when
the control is a button control.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:33:25 -03:00
Martin Rubli e56be91666 V4L/DVB: uvcvideo: Add support for absolute pan/tilt controls
Signed-off-by: Martin Rubli <martin_rubli@logitech.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:33:08 -03:00
Jarod Wilson 49da8be59b V4L/DVB: IR/imon: auto-configure another 0xffdc device variant
Per Pieter Hoekstra:

I have a Antec Fusion with a iMON Lcd and I get the following error:
imon 6-1:1.0: Unknown 0xffdc device, defaulting to VFD and iMON IR (id
0x9e)

The driver is functional if I load it like this: (I do not use a remote for it)
modprobe imon display_type=1 (On Mythbuntu 10.04/2.6.32)

This device is a lcd-type with support for a MCE remote. Looking at
the source code, this device (0x9e) is the same as id 0x9f.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:33:00 -03:00
Jean Delvare 89c3bc7807 V4L/DVB: cx88: Let the user disable IR support
It might be useful to be able to disable the IR support, either for
debugging purposes, or just for users who know they won't use the IR
remote control anyway. On many cards, IR support requires expensive
polling/sampling which is better avoided if never needed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:32:41 -03:00
Jean Delvare 15ceb6b1c3 V4L/DVB: cx88: Move I2C IR initialization
Move I2C IR initialization from just after I2C bus setup to right
before non-I2C IR initialization. This is the same as was done for
the bttv driver several months ago. Might solve bugs which have not yet
been reported for some cards. It makes both drivers consistent, and
makes it easier to disable IR support (coming soon.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:32:25 -03:00
Michael Krufky 7d7b5284d7 V4L/DVB: cx23885: add support for new model revisions of the HVR12xx board family
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:32:10 -03:00
Mauro Carvalho Chehab 1cdffda73f V4L/DVB: xc5000: Fix a few warnings
drivers/media/common/tuners/xc5000.c: In function ‘xc_write_reg’:
drivers/media/common/tuners/xc5000.c:298: warning: passing argument 3 of ‘xc5000_readreg’ from incompatible pointer type
drivers/media/common/tuners/xc5000.c:235: note: expected ‘u16 *’ but argument is of type ‘u8 *’
drivers/media/common/tuners/xc5000.c: At top level:
drivers/media/common/tuners/xc5000.c:223: warning: ‘xc_read_i2c_data’ defined but not used

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:31:59 -03:00
Andy Walls 43c2407820 V4L/DVB: cx23885: Convert cx23885-input to use new in kernel IR pulse decoders
Convert the cx23885 driver to use the new in kernel IR pulse
decoders for the integrated CX2388[578] IR controllers.  Rip out a lot
of RC-5 decoding related code in the process and rename some variables
for clarity or to more accurately describe their usage.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:31:44 -03:00
Andy Walls eeefae532e V4L/DVB: cx23885: Convert from struct card_ir to struct cx23885_ir_input for IR Rx
Move from the generic, shared card_ir state structure to a cx23885 driver
specific IR state structure in anticipation of moving to the new IR pulse
decoders in the IR core.

Fix up the card name truncation in the dmesg log while we're at it,
by avoiding using fixed length string storage in our new IR state
structure.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:31:28 -03:00
Jean-François Moine b192ca9837 V4L/DVB: gspca - main: Simplify image building
The image pointer and its length are now in the main structure instead
of in the frame buffer. They are updated on application vidioc_qbuf and
in the URB interrupt function when ending an image.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:31:10 -03:00
Jean-François Moine c6dc725c8e V4L/DVB: gspca - gl860: Fix a compilation warning
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:30:55 -03:00
Murali Karicheri 2b5e45cdf9 V4L/DVB: vpif: removing VPIF config variables
The Kconfig variables are moved to video/davinci/Kconfig through another
patch and these are to be therefore removed

Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:30:50 -03:00
Vaibhav Hiremath 540069010d V4L/DVB: vpfe_capture: Create separate Kconfig file for davinci devices
Currently VPFE Capture driver and DM6446 CCDC driver is being
reused for AM3517. So this patch is preparing the Kconfig/makefile
for re-use of such IP's.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:30:36 -03:00
Justin P. Mattock a04b75410a V4L/DVB: tuners:tuner-simple Fix warning: variable 'tun' set but not used
Resend due to a whitespace issue I created by mistake.
The below patch fixes a warning message create by gcc 4.6.0

 CC [M]  drivers/media/common/tuners/tuner-simple.o
drivers/media/common/tuners/tuner-simple.c: In function 'simple_set_tv_freq':
drivers/media/common/tuners/tuner-simple.c:548:20: warning: variable 'tun' set but not used

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:29:39 -03:00
Julia Lawall bd0db8c7ad V4L/DVB: drivers/media/dvb/frontends: remove duplicate structure field initialization
The read_status field is initialized twice to the same value.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier I, s, fld;
position p0,p;
expression E;
@@

struct I s =@p0 { ... .fld@p = E, ...};

@s@
identifier I, s, r.fld;
position r.p0,p;
expression E;
@@

struct I s =@p0 { ... .fld@p = E, ...};

@script:python@
p0 << r.p0;
fld << r.fld;
ps << s.p;
pr << r.p;
@@

if int(ps[0].line)<int(pr[0].line) or int(ps[0].column)<int(pr[0].column):
  cocci.print_main(fld,p0)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:29:18 -03:00
Dmitri Belimov 4743319fb0 V4L/DVB: xc5000, rework xc_write_reg
Rework xc_write_reg function for correct read register of the xc5000.
It is very useful for tm6000.

Tested for tm6000 and for saa7134 works well.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Acked-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:29:10 -03:00
Dan Carpenter e252984c52 V4L/DVB: dvb_ca_en50221: return -EFAULT on copy_to_user errors
copy_to_user() returns the number of bytes remaining to be copied which
isn't the right thing to return here.  The comments say that these
functions in dvb_ca_en50221.c should return the number of bytes copied or
an error return.  I've changed it to return -EFAULT.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:28:59 -03:00
Dan Carpenter aac870a877 V4L/DVB: media/radio: fix copy_to_user to user handling
copy_to/from_user() returns the number of bytes remaining to be copied
but the code here was testing for negative returns.  I modified it to
return -EFAULT.  These functions are called from si4713_s_ext_ctrls() and
that only tests for negative error codes.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:28:51 -03:00
Ben Hutchings 398630e4ed V4L/DVB: mantis: Select correct frontends
Update the Kconfig selections to match the code.
Add the usual condition of !DVB_FE_CUSTOMISE.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:28:47 -03:00
Perceval Anichini 07204aea14 V4L/DVB: hdpvr: Fixes probing function
In the hdpvr_probe () function, when an error occurs while probing the device,
the workqueue created by the create_single_thread () call is not properly
destroyed.

Signed-off-by: Perceval Anichini <perceval@trilogic.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:28:34 -03:00
Dean Anderson fe85ce90ab V4L/DVB: s2255drv: cleanup of device structure
s2255drv: cleanup of device structure

cleanup of device structure.
single channel array instead of multiple arrays in device for
each channel property.
simplifies open callback by removing search for channel index.

Signed-off-by: Dean Anderson <linux-dev@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:28:22 -03:00
Dan Carpenter 2e9157f8ab V4L/DVB: cpia_usb: remove unneeded variable
This is just a cleanup patch.  We never use the "udev" variable so I
have removed it.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:28:06 -03:00
Dan Carpenter 8b0d7048dc V4L/DVB: remove unneeded null check in anysee_probe()
Smatch complained because "d" is dereferenced first and then checked for
null later .  The only code path where "d" could be a invalid pointer is
if this is a cold device in dvb_usb_device_init().  I consulted Antti
Palosaari and he explained that anysee is always a warm device.

I have added a comment and removed the unneeded null check.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:27:54 -03:00
Vadim Catana 128fe95d77 V4L/DVB: TechnoTrend TT-budget T-3000
This patch adds support for TechnoTrend TT-budget T-3000 DVB-T card.

Signed-off-by: Vadim Catana <vadim.catana@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:27:33 -03:00
Amerigo Wang 0d58cef664 V4L/DVB: Remove obsolete zc0301 v4l driver
On 05/29/10 01:30, Jean-Francois Moine wrote:
> On Fri, 28 May 2010 13:03:28 -0400
> Amerigo Wang<amwang@redhat.com>  wrote:
>
>> Subject: [PATCH 6/6] Remove obsolete zc0301 v4l driver
>>
>> Duplicate functionality with the gspca_zc3xx driver, zc0301 only
>> supports 2 USB-ID's (because it only supports a limited set of
>> sensors) wich are also supported by the gspca_zc3xx driver
>> (which supports 53 USB-ID's in total).
>
> You forgot to remove the conditionnal compilation in the gspca_zc3xx
> driver (USB_DEVICE(0x046d, 0x08ae) in gspca/zc3xx.c)
>

Right, thanks for pointing this out!

Attached is the updated patch, please use this one instead.

Thanks!

Duplicate functionality with the gspca_zc3xx driver, zc0301 only
supports 2 USB-ID's (because it only supports a limited set of
sensors) wich are also supported by the gspca_zc3xx driver
(which supports 53 USB-ID's in total).

Signed-off-by: Amerigo Wang <amwang@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:27:16 -03:00
Amerigo Wang a96076096b V4L/DVB: Remove obsolete stv680 v4l1 driver
obsolete v4l1 driver replaced by gspca_stv0680

Signed-off-by: Amerigo Wang <amwang@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:26:57 -03:00
Amerigo Wang 3b23bc5731 V4L/DVB: Remove obsolete ovcamchip sensor framework
Only used by obsoleted v4l1 driver

Signed-off-by: Amerigo Wang <amwang@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:26:43 -03:00
Amerigo Wang 51c555690d V4L/DVB: Remove obsolete w9968cf v4l1 driver
>From a97df96226e89d3539be93ddb5a8df3a2f7edcb6 Mon Sep 17 00:00:00 2001

obsolete v4l1 driver replaced by gspca_ov519

Signed-off-by: Amerigo Wang <amwang@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:26:27 -03:00
Amerigo Wang 7373ab3669 V4L/DVB: Remove obsolete ov511 driver
obsolete v4l1 driver replaced by gspca_ov519

Signed-off-by: Amerigo Wang <amwang@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:26:13 -03:00
Amerigo Wang 566789f6b0 V4L/DVB: Remove usbvideo quickcam_messenger driver
obsolete v4l1 driver replaced by gspca_stv06xx

Signed-off-by: Amerigo Wang <amwang@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:25:58 -03:00
Laurent Pinchart bb6dbe7480 V4L/DVB: videobuf: Rename vmalloc fields to vaddr
The videobuf_dmabuf and videobuf_vmalloc_memory fields have a vmalloc
field to store the kernel virtual address of vmalloc'ed buffers. Rename
the field to vaddr.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:25:57 -03:00
Laurent Pinchart 959794ddc0 V4L/DVB: videobuf: Remove videobuf_mapping start and end fields
The fields are assigned but never used, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:23:09 -03:00
Laurent Pinchart 7181772d89 V4L/DVB: videobuf: Don't export videobuf_(vmalloc|pages)_to_sg
Those functions are only called inside videobuf-dma-sg.c, make them
static.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:22:36 -03:00
Laurent Pinchart fecfedeb27 V4L/DVB: Remove videobuf_sg_alloc abuse
The cx88 and cx25821 drivers abuse videobuf_buffer to handle audio data.
Remove the abuse by creating private audio buffer structures with a
videobuf_dmabuf field.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:22:19 -03:00
Laurent Pinchart 952684035a V4L/DVB: videobuf: Remove the videobuf_sg_dma_map/unmap functions
Instead of creating dirty wrappers around videobuf_dma_map/unmap that
create a dummy videobuf_queue structure, modify videobuf_dma_map/unmap
to take a device pointer argument and use it directly. The
videobuf_sg_dma_map/unmap then become unused and can be removed.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:21:45 -03:00
Pawel Osciak a438d6da52 V4L/DVB: videobuf: rename videobuf_mmap_free and add sanity checks
This function is not specific to mmap, hence the rename.
Add a check whether we are not streaming or reading (for read mode that
uses the stream queue) before freeing anything.

Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:21:29 -03:00
Pawel Osciak 33c38283f0 V4L/DVB: videobuf: rename videobuf_alloc to videobuf_alloc_vb
These functions allocate videobuf_buffer structures only. Renaming in order
to prevent confusion with functions allocating actual video buffer memory.

Rename the functions in videobuf-core.h videobuf-dma-sg.c as well.

Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:20:47 -03:00
Julia Lawall c6cfe05532 V4L/DVB: drivers/media: Use memdup_user
Use memdup_user when user data is immediately copied into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:20:28 -03:00
Jarod Wilson 15f135d0cf V4L/DVB: IR: add empty lirc pseudo-keymap
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:18:02 -03:00
Jarod Wilson ca4146985d V4L/DVB: IR: add ir-core to lirc userspace decoder bridge driver
v2: copy of buffer data from userspace done inside this plugin/driver,
keeping the actual drivers minimal, and more flexible in what we can
deliver to them later on (they may be fed from within kernelspace later
on, by an in-kernel IR encoder).

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:16:20 -03:00
Jarod Wilson 4a62a5ab59 V4L/DVB: IR: add lirc device interface
v2: currently unused ioctls are included, but #if 0'd out

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:04:19 -03:00
Julia Lawall 7a12f4b50d V4L/DVB: drivers/media/video/zoran: Use kmemdup
Use kmemdup when some other buffer is immediately copied into the
allocated region.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
statement S;
@@

-  to = \(kmalloc\|kzalloc\)(size,flag);
+  to = kmemdup(from,size,flag);
   if (to==NULL || ...) S
-  memcpy(to, from, size);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:04:04 -03:00
Dan Carpenter cd3172d7da V4L/DVB: dvb-usb-init.c: white space changes in dvb-usb-init
I started fixing one or two lines, but after a while I got into a groove
and started changing everything.  I left the lines longer than 80
characters because that seemed to be the style in this file.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:03:53 -03:00
Julia Lawall 2b3c543a83 V4L/DVB: drivers/media/video/tlg2300: Use kmemdup
Use kmemdup when some other buffer is immediately copied into the
allocated region.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
statement S;
@@

-  to = \(kmalloc\|kzalloc\)(size,flag);
+  to = kmemdup(from,size,flag);
   if (to==NULL || ...) S
-  memcpy(to, from, size);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:03:36 -03:00
Klaus Schmidinger f6a20eb1a2 V4L/DVB: Add FE_CAN_TURBO_FEC
Some (North American) providers use a non-standard mode called
"8psk turbo fec". Since there is no flag in the driver that
would allow an application to determine whether a particular
device can handle "turbo fec", the attached patch introduces
FE_CAN_TURBO_FEC.

Since there is no flag in the SI data that would indicate
that a transponder uses "turbo fec", VDR will assume that
all 8psk transponders on DVB-S use "turbo fec".

Tested-by: Derek Kelly <user.vdr@gmail.com>
Signed-off-by: Klaus Schmidinger <Klaus.Schmidinger@tvdr.de>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:02:12 -03:00
Julia Lawall 0b21d55f89 V4L/DVB: drivers/media/video/uvc: Use kmemdup
Use kmemdup when some other buffer is immediately copied into the
allocated region.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
statement S;
@@

-  to = \(kmalloc\|kzalloc\)(size,flag);
+  to = kmemdup(from,size,flag);
   if (to==NULL || ...) S
-  memcpy(to, from, size);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:01:58 -03:00
Julia Lawall feda79bffc V4L/DVB: drivers/media/video/gspca: Use kmemdup
Use kmemdup when some other buffer is immediately copied into the
allocated region.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
statement S;
@@

-  to = \(kmalloc\|kzalloc\)(size,flag);
+  to = kmemdup(from,size,flag);
   if (to==NULL || ...) S
-  memcpy(to, from, size);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:01:43 -03:00
Daniel Mack 230b27cd8e V4L/DVB: drivers/media/dvb/dvb-usb/dib0700: CodingStyle fixes
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:01:33 -03:00
Daniel Mack 8871c85d86 V4L/DVB: drivers/media/dvb/dvb-usb/dib0700: fix return values
Propagte correct error values instead of returning -1 which just means
-EPERM ("Permission denied")

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:01:15 -03:00
Julia Lawall 4c61f678a4 V4L/DVB: drivers/media/video/pvrusb2: Add missing mutex_unlock
Add a mutex_unlock missing on the error path.  In the other functions in
the same file the locks and unlocks of this mutex appear to be balanced,
so it would seem that the same should hold in this case.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression E1;
@@

* mutex_lock(E1,...);
  <+... when != E1
  if (...) {
    ... when != E1
*   return ...;
  }
  ...+>
* mutex_unlock(E1,...);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:01:02 -03:00
Randy Dunlap a3b1dc9557 V4L/DVB: vivi: fix depends again
My previous patch to depend on FONTS was not sufficient since
FONTS is boolean.  VIDEO_VIVI needs to depend on a tristate so that
it won't be enabled as =y when framebuffer is built as modular, so
modify it to depend on the same symbols that FONTS depends on, which
are FRAMEBUFFER_CONSOLE || STI_CONSOLE.

Fixes this build error when VIDEO_VIVI=y and FRAMEBUFFER_CONSOLE=m:
vivi.c:(.init.text+0x7205): undefined reference to `find_font'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:00:58 -03:00
Joe Perches 806ec0fb56 V4L/DVB: smscoreapi/w9968cf: drivers/media: Remove unnecesary kmalloc casts
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:00:41 -03:00
Jarod Wilson e23fb9643b V4L/DVB: IR/mceusb: add tx callback functions and wire up
mchehab: merged with IR/mceusb: userspace buffer copy moved out of driver

    Userspace buffer copy moved out of driver and into lirc bridge driver

[mchehab@redhat.com: merged the patch to avoid compilation errors with allyesconfig ]
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:58:58 -03:00
Jarod Wilson d732a72de4 V4L/DVB: IR/mceusb: kill pinnacle-device-specific nonsense
I have pinnacle hardware now. None of this pinnacle-specific crap is at
all necessary (in fact, some of it needed to be removed to actually make
it work). The only thing unique about this device is that it often
transfers inbound data w/a header of 0x90, meaning 16 bytes of IR data
following it, so I had to make adjustments for that, and now its working
perfectly fine.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:55:58 -03:00
Jarod Wilson 657290b63e V4L/DVB: IR/mceusb: misc cleanups and init fixes
The first-gen mceusb device init code, while mostly functional, had a few
issues in it. This patch does the following:

1) removes use of magic numbers
2) eliminates mapping of memory from stack
3) makes debug spew translator functional

Additionally, this clean-up revealed that we cannot read the proper default
tx blaster bitmask from the device, we do actually have to initialize it
ourselves, which requires use of a somewhat gross list-based mask inversion
check.

This patch also removes the entirely unnecessary use of struct ir_input_state.

Also supersedes two earlier patches that also touched on first-gen
cleanup, but were partially botched. This one actually compiles, works,
etc., I swear. ;)

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:55:47 -03:00
Jarod Wilson bd3881b1ce V4L/DVB: IR/mceusb: use the proper ir-core device unregister function
Was using input_unregister_device directly, instead of using
ir_input_unregister, which tears down a bunch of other things in
addition to eventually calling input_unregister_device.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:55:40 -03:00
Jarod Wilson 8a3fa8129c V4L/DVB: IR/imon: use the proper ir-core device unregister function
Was using input_unregister_device directly, instead of using
ir_input_unregister, which tears down a bunch of other things in
addition to eventually calling input_unregister_device.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:55:30 -03:00
Randy Dunlap 2135436af1 V4L/DVB: media/IR: nec-decoder needs to select BITREV
Fix ir-nec-decoder build: it uses bitrev library code, so
select BITREVERSE in its Kconfig.

ir-nec-decoder.c:(.text+0x1a2517): undefined reference to `byte_rev_table'
ir-nec-decoder.c:(.text+0x1a2526): undefined reference to `byte_rev_table'
ir-nec-decoder.c:(.text+0x1a2530): undefined reference to `byte_rev_table'
ir-nec-decoder.c:(.text+0x1a2539): undefined reference to `byte_rev_table'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:55:25 -03:00
David Härdeman c216369e61 V4L/DVB: ir-core: move decoding state to ir_raw_event_ctrl
This patch moves the state from each raw decoder into the
ir_raw_event_ctrl struct.

This allows the removal of code like this:

        spin_lock(&decoder_lock);
        list_for_each_entry(data, &decoder_list, list) {
                if (data->ir_dev == ir_dev)
                        break;
        }
        spin_unlock(&decoder_lock);
        return data;

which is currently run for each decoder on each event in order
to get the client-specific decoding state data.

In addition, ir decoding modules and ir driver module load
order is now independent. Centralizing the data also allows
for a nice code reduction of about 30% per raw decoder as
client lists and client registration callbacks are no longer
necessary (but still kept around for the benefit of the lirc
decoder).

Out-of-tree modules can still use a similar trick to what
the raw decoders did before this patch until they are merged.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:55:15 -03:00
Mauro Carvalho Chehab de8592bd53 V4L/DVB: ir-core: allow specifying multiple protocols at one open/write
With this change, it is now possible to do something like:
        su -c 'echo "none +rc-5 +nec" > /sys/class/rc/rc1/protocols'

This prevents the need of multiple opens, one for each protocol change,
and makes userspace application easier.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:55:05 -03:00
Mauro Carvalho Chehab 5f1247972e V4L/DVB: ir-core: Add support for disabling all protocols
Writing "none" to /dev/class/rc/rc*/protocols will disable all protocols.
This allows an easier setup, from userspace, as userspace applications don't
need to disable protocol per protocol, before enabling a different set of
protocols.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:54:56 -03:00
Mauro Carvalho Chehab a9e55ea977 V4L/DVB: ir-core: Rename sysfs protocols nomenclature to rc-5 and rc-6
While rc-5 and rc-6 protocols are generally abreviated as "rc5" and "rc6",
previous sysfs nodes uses rc-5 and rc-6 for the Philips protocols. This is
consistent with the protocol nomenclature given by the original Philips
spec: "Remote control system RC-5" (doc. Nr. 9398 706 23011).
Also, rc5 is the name of a widely known cryptography protocol.

So, the better is to keep referring to those protocols as "rc-5" and "rc-6".

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:54:45 -03:00
Mauro Carvalho Chehab 4403b7b4ea V4L/DVB: ir-core: Remove magic numbers at the sysfs logic
Instead of using "magic" sizes for protocol names, replace them by an
array, and use strlen().

No functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:54:35 -03:00
David Härdeman 667c9ebe97 V4L/DVB: ir-core: centralize sysfs raw decoder enabling/disabling
With the current logic, each raw decoder needs to add a copy of the exact
same sysfs code. This is both unnecessary and also means that (re)loading
an IR driver after raw decoder modules have been loaded won't work as
expected.

This patch moves that logic into ir-raw-event and adds a single sysfs
file per device.

Reading that file returns something like:

	"rc5 [rc6] nec jvc [sony]"

(with enabled protocols in [] brackets)

Writing either "+protocol" or "-protocol" to that file will
enable or disable the according protocol decoder.

An additional benefit is that the disabling of a decoder will be
remembered across module removal/insertion so a previously
disabled decoder won't suddenly be activated again. The default
setting is to enable all decoders.

This is also necessary for the next patch which moves even more decoder
state into the central raw decoding structs.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:54:27 -03:00
David Härdeman 0dc50942d6 V4L/DVB: ir-core: partially convert ir-kbd-i2c.c to not use ir-functions.c
Partially convert drivers/media/video/ir-kbd-i2c.c to
not use ir-functions.c

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:53:59 -03:00
David Härdeman 3bbd3f2d09 V4L/DVB: ir-core: partially convert cx88 to not use ir-functions.c
Partially convert drivers/media/video/cx88/cx88-input.c to not use
ir-functions.c

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:53:45 -03:00
Mauro Carvalho Chehab 603044d883 V4L/DVB: em28xx-input: Don't generate one debug message for every get_key read
Instead of generating one printk for every IR read, prints it only when
count is different from the last count.

While here, as this code is called on every 100ms during the runtime
lifetime, do some performance optimization, assuming that, under normal
circumstances, it is unlikely that the driver would get a new key/key
repeat on every poll.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:53:30 -03:00
David Härdeman a469585b1c V4L/DVB: ir-core: convert em28xx to not use ir-functions.c
Convert drivers/media/video/em28xx/em28xx-input.c to not use ir-functions.c

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:53:19 -03:00
David Härdeman f0bdee26a2 V4L/DVB: ir-core: convert mantis to not use ir-functions.c
Convert drivers/media/dvb/mantis/mantis_input.c to not use ir-functions.c

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:53:07 -03:00
Abylay Ospan bee30192fe V4L/DVB: Fix kernel Oops when number of NetUP Dual DVB-S2-CI cards more than DVB_MAX_ADAPTERS limit
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:52:54 -03:00
Jean-François Moine 38bff697ac V4L/DVB: gspca - main: Remove V4L1 compatibility
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:52:36 -03:00
Jean-François Moine e795d912d7 V4L/DVB: gspca - main: Don't use the PG_Reserved flag for mmapped buffers
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:52:20 -03:00
Jean-François Moine a68f723cef V4L/DVB: gspca - sq930x: New sensor mt9v111
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:52:02 -03:00
Jean-François Moine 7d716a36c3 V4L/DVB: gspca - sq930x: Check the USB read errors
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:51:45 -03:00
Jean-François Moine a1317135d1 V4L/DVB: gspca - pac7302/11: Bad request value in USB write
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:51:30 -03:00
Márton Németh 4e6aeefeb8 V4L/DVB: gspca - pac7302: add Genius iSlim 310
Add Genius iSlim 310 webcam to the supported list of the PAC7302 driver.
For more information see http://linuxtv.org/wiki/index.php/PixArt_PAC7301/PAC7302 .

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:51:13 -03:00
Olivier Lorin 8bbb1c3905 V4L/DVB: gspca - gl860: text alignment
- Extra spaces to align some variable names and a defined value

Signed-off-by: Olivier Lorin <o.lorin@laposte.net>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:50:54 -03:00
Olivier Lorin d398c0eb62 V4L/DVB: gspca - gl860: fix for wrong 0V9655 resolution identifier name
Signed-off-by: Olivier Lorin <o.lorin@laposte.net>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:50:38 -03:00
Olivier Lorin bff7e839da V4L/DVB: gspca - gl860: use of real resolutions for MI2020 sensor
- Change of rounded image resolutions to the real ones for MI2020 sensor
  in order to discard 2 random lines in the bottom of images

Signed-off-by: Olivier Lorin <o.lorin@laposte.net>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:50:24 -03:00
Olivier Lorin f980f5d2a4 V4L/DVB: gspca - gl860: setting changes applied after an EOI
- Setting changes applied after an end of image marker reception
  This is the way MI2020 sensor works.
  It seems to be logical to wait for a complete image before
  to change a setting.

Signed-off-by: Olivier Lorin <o.lorin@laposte.net>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:50:08 -03:00
Olivier Lorin ccbc3cf22c V4L/DVB: gspca - gl860: USB control message delay unification
- 1 ms "msleep" applied to each sensor after USB control data exchange
  This was done for two sensors because these exchanges were known to
  be too quick depending on laptop model.
  It is fairly logical to apply this delay to each sensor
  in order to prevent from having errors with untested hardwares.

Signed-off-by: Olivier Lorin <o.lorin@laposte.net>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:49:54 -03:00
Olivier Lorin a13ee1dd5b V4L/DVB: gspca - gl860: new driver for MI2020 sensor
- new MI2020 driver version made from a webcam gift
- all previous flavors of this driver removed

Signed-off-by: Olivier Lorin <o.lorin@laposte.net>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:49:37 -03:00
Jean-François Moine be2a9fae7b V4L/DVB: gspca: Remove/move useless inclusions of slab.h
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:49:20 -03:00
Devin Heitmueller 2584bc4337 V4L/DVB: Fix case where fields were not at the correct start location
This patch address an arithmetic error for the case where the only remaining
content in the USB packet was the "225Axxxx" start of active video.  In cases
where that happened to be at the end of the frame, we would inject it into the
videobuf (which is incorrect).  This caused fields to be intermittently
rendered off by two pixels.

Thanks to Eugeniy Meshcheryakov for bringing this issue to my attention

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:49:04 -03:00
Devin Heitmueller 7f8eacd216 V4L/DVB: Add closed captioning support for the HVR-950q
Add NTSC closed captioning support for au0828 based products.  Note that this
also required reworking the locking to support streaming on both the video and
VBI devices (the logic for which I copied from my changes made to the em28xx
several months ago).

This work was sponsored by GetWellNetwork Inc.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:48:53 -03:00
Michael Krufky fab9bfbed2 V4L/DVB: tda18271: fix error detection during initialization of first instance
Fix error detection of failures during initialization of first instance:
Dont pass a function into the tda_fail macro. Instead, save the function
return value and pass that into the tda_fail macro.

This prevents the function from being called twice in cases of failure,
for example:

[19026.074070] tuner 4-0060: chip found @ 0xc0 (device #0)
[19026.087755] tda18271 4-0060: creating new instance
[19026.089965] Unknown device detected @ 4-0060, device not supported.
[19026.092233] Unknown device detected @ 4-0060, device not supported.
[19026.092241] tda18271_attach: [4-0060|M] error -22 on line 1275
[19026.092327] tda18271 4-0060: destroying instance

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:48:43 -03:00
Andy Walls 4359e5b5ba V4L/DVB: ivtv: Increment driver version due to firmware loading changes
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:48:30 -03:00
Ian Armstrong 215659d14f V4L/DVB: ivtv: Automatic firmware reload
If the firmware has failed, this patch will automatically reload &
restart the card. The previous card state will be restored on a
successful restart.  Firmware reload will only happen if neither the
encoder or decoder is active.  If the card is busy then behaviour is as
before, returning -EIO on device access until the reload can occur. On
cards that support video output, coloured bars will be displayed during
the reload.

Andy Walls (ivtv maintainer and patch committer) made minor tweaks to
comments and the logged messages, but nothing substantial otherwise.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:48:13 -03:00
Ian Armstrong 914610e8c5 V4L/DVB: ivtv: Add firmare monitoring and debug mode to ignore firmware problems
>From Ian's e-mail:
When a device is opened the firmware state will be checked. If it isn't
responding then the open will fail with -EIO.  Due to the nature of the
hardware, a single failed check will block everything since we don't know
exactly what has failed. A side effect of this is the blocking of debug
access, so an additional debug level has been created which allows the block
to be bypassed.

Andy Walls' modifications:
I modified Ian's patch to add a separate fw_debug module parameter to change
the driver's behavior, as opposed to using the normal debug module parameter.
The fw_debug module parameter is only available when CONFIG_VIDEO_ADV_DEBUG
is set.
I also made some minor whitespace adjustments and changed some warning
messages to be a bit more specific.  s/happy/glad/g

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:47:55 -03:00
Michael Krufky a5ba334cda V4L/DVB: lgdt3305: enable FE_HAS_SIGNAL hack for the lgdt3304 in QAM mode
The signal bit is unreliable on the DT3304 in QAM mode, so
set FE_HAS_SIGNAL based on 'cr_lock'

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:47:41 -03:00
Michael Krufky 40ff540f3e V4L/DVB: lgdt3305: update copyright date and MODULE_VERSION
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:47:19 -03:00
Michael Krufky 132631d07f V4L/DVB: lgdt3305: Jarod Wilson gets the credit for LGDT3304 support
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:47:07 -03:00
Michael Krufky 10952a716f V4L/DVB: lgdt3305: FIXME: verify & document the LGDT3304 registers
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:46:55 -03:00
Michael Krufky d99a211822 V4L/DVB: lgdt3305: consolidate init functions
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:46:42 -03:00
Michael Krufky 241b0f4111 V4L/DVB: lgdt3305: re-write lgdt3304 ifbw hack in lgdt3305_rfagc_loop with FIXME
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:46:29 -03:00
Michael Krufky 5de82faec8 V4L/DVB: lgdt3305: update lgdt3305.h header to match the header in lgdt3305.c
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:46:11 -03:00
Michael Krufky bf37d1354f V4L/DVB: lgdt3305: remove pointless function, lgdt3304_sleep
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:45:59 -03:00
Jarod Wilson 804258c95f V4L/DVB: dvb: add lgdt3304 support to lgdt3305 driver
There's a currently-unused lgdt3304 demod driver, which leaves a lot to
be desired as far as functionality. The 3304 is unsurprisingly quite
similar to the 3305, and empirical testing yeilds far better results
and more complete functionality by merging 3304 support into the 3305
driver. (For example, the current lgdt3304 driver lacks support for
signal strength, snr, ucblocks, etc., which we get w/the lgdt3305).

For the moment, not dropping the lgdt3304 driver, and its still up to
a given device's config setup to choose which demod driver to use, but
I'd suggest dropping the 3304 driver entirely.

As a follow-up to this patch, I've got another patch that adds support
for the KWorld PlusTV 340U (ATSC) em2870-based tuner stick, driving
its lgdt3304 demod via this lgdt3305 driver, which is what I used to
successfully test this patch with both VSB_8 and QAM_256 signals.

A few pieces are still a touch crude, but I think its a solid start,
as well as much cleaner and more feature-complete than the existing
lgdt3304 driver.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:45:34 -03:00
Jean-François Moine 5b0ff8c43a V4L/DVB: gspca - spca1528: New subdriver
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:45:17 -03:00
Jean-François Moine 4462864d72 V4L/DVB: gspca - main: Function gspca_dev_probe2 added
This function is used when the USB video interface is checked by
the subdriver.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:44:56 -03:00
Jean-François Moine 618a864ee7 V4L/DVB: gspca - sq930x: New subdriver
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:44:38 -03:00
Jean-François Moine e9b156532e V4L/DVB: gspca - t613: Change the gain mechanism
- variable / function rename
- set the gains in one exchange
- don't alter the register 80 which contains the AWB flag
  and other sensor specific values
- the global gain is now the average of the R, G and B gains.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:44:18 -03:00
Jean-François Moine ebb78c5a81 V4L/DVB: gspca - t613: Simplify the scan of isoc packets
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:44:08 -03:00
Jean-François Moine 983882411b V4L/DVB: gspca - t613: Remove the RGB gains setting from sensor_polling
This patch also renames the last polling message from the closer one
of the ms-windows driver.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:44:02 -03:00
Jean-François Moine 79960d3904 V4L/DVB: gspca - t613: Change the gamma table
The new table is sorted and extracted from a clear part of the MS-Windows
driver.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:43:39 -03:00
Jean-François Moine 78b98cb942 V4L/DVB: gspca - t613: Adjust light frequency values per sensor
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:43:22 -03:00
Jean-François Moine cd8955b85e V4L/DVB: gspca - t613: Cleanup and clarify the source
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:06:13 -03:00
Jean-François Moine a9dfc01d20 V4L/DVB: gspca - zc3xx: Add back the brightness control
This patch also changes a bit the contrast control.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:06:12 -03:00
Jean-François Moine 93604b0fdd V4L/DVB: gspca - zc3xx: Don't change the registers 7 and 8 for sensor pas202b
These registers seem to act on the JPEG compression whose control
is not implemented in the current driver.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:06:11 -03:00
Jean-François Moine db6cf426a8 V4L/DVB: gspca - zc3xx: Change the max and default JPEG qualities
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:06:10 -03:00
Jean-François Moine bf48cc4149 V4L/DVB: gspca - stk014: Change the min and default values of the JPEG quality
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:06:09 -03:00
Jean-François Moine 9a731a3265 V4L/DVB: gspca - JPEG subdrivers: Don't allocate the JPEG header
The JPEG header is now included in the subdriver structure instead
of being allocated and freed at capture start and stop.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:06:08 -03:00
Hans de Goede 456c9acb63 V4L/DVB: gspca_ov519: Don't report a saturation control for 7670 sensors
setcolors(0 is a no-op for 7670 sensors, so we should not report a
saturation control for 7670 sensors.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:06:07 -03:00
Hans de Goede 74c519cb6c V4L/DVB: gspca_tv8532: rename brightness control to exposure
What we've called brightness so far actually is an exposure control,
rename it and fixup the maximum and default values.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:06:06 -03:00
Hans de Goede 14bff9b8e7 V4L/DVB: gspca_tv8532: add gain control
gspca_tv8532: add gain control

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:06:05 -03:00
Hans de Goede 5e027610ea V4L/DVB: gspca_tv8532: remove a whole bunch of unnecessary register writes
There is a problem with certain tv8532 cams, where sometimes there
hsync/vsync locks one pixel of where it normally locks. While trying to
fix this (which I failed to do). I noticed there are lots if duplicate
register writes and unnecessary register reads in the tv8532 driver. This
patch cleanes these ups (which has no negative effects, but unfortunately
also does not help).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:06:04 -03:00
Hans de Goede d6b6d7aef4 V4L/DVB: gspca_ovfx2: drop first frames in stream if not synced
With the ovfx2 bridge sometimes the first few frames in a stream
would be no good, as the bridge and sensor are not in complete hsync /
vsync yet. This can easily be detected by checking the framesize. So if the
framesize is short and it is one of the 1ste 3 frames after an sd_start,
drop it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:06:03 -03:00
Jarod Wilson 66e89522af V4L/DVB: IR: add mceusb IR receiver driver
This is a new driver for the Windows Media Center Edition/eHome
Infrared Remote transceiver devices. Its a port of the current
lirc_mceusb driver to ir-core, and currently lacks transmit support,
but will grow it back soon enough... This driver also differs from
lirc_mceusb in that it borrows heavily from a simplified IR buffer
decode routine found in Jon Smirl's earlier ir-mceusb port.

This driver has been tested on the original first-generation MCE IR
device with the MS vendor ID, as well as a current-generation device
with a Topseed vendor ID. Every receiver supported by lirc_mceusb
should work equally well. Testing was done primarily with RC6 MCE
remotes, but also briefly with a Hauppauge RC5 remote, and all works
as expected.

v2: fix call to ir_raw_event_handle so repeats work as they should.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:05:49 -03:00
Jarod Wilson 0204fe2a20 V4L/DVB: IR: add RC6 keymap for Windows Media Center Ed. remotes
This is the RC6 keymap for the Windows Media Center Edition remotes
that come bundled with MCE/eHome Infrared Remote transceivers. Tested
with 3 different variants of the remote, but its possible there are
still some additional keys missing, but its simple enough to add them
in later...

This patch also adds an IR_TYPE_ALL convenience macro to make life
easier for receivers that support all IR protocols.

v2: fix an erroneous comment that referred to imon devices

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:05:48 -03:00
Jarod Wilson 7366646e20 V4L/DVB: IR: only initially registers protocol that matches loaded keymap
Rather than registering all IR protocol decoders as enabled when bringing
up a new device, only enable the IR protocol decoder that matches the
keymap being loaded. Additional decoders can be enabled on the fly by
those that need to, either by twiddling sysfs bits or by using the
ir-keytable util from v4l-utils.

Functional testing done with the mceusb driver, and it behaves as expected,
only the rc6 decoder is enabled, keys are all handled properly, etc.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:05:46 -03:00
Jarod Wilson c228426111 V4L/DVB: IR: let all protocol decoders have a go at raw data
On Fri, May 28, 2010 at 3:59 PM, Jarod Wilson <jarod@redhat.com> wrote:
> The mceusb driver I'm about to submit handles just about any raw IR you
> can throw at it. The ir-core loads up all protocol decoders, starting
> with NEC, then RC5, then RC6. RUN_DECODER() was trying them in the same
> order, and exiting if any of the decoders didn't like the data. The
> default mceusb remote talks RC6(6A). Well, the RC6 decoder never gets a
> chance to run unless you move the RC6 decoder to the front of the list.
>
> What I believe to be correct is to have RUN_DECODER keep trying all of
> the decoders, even when one triggers an error. I don't think the errors
> matter so much as it matters that at least one was successful -- i.e.,
> that _sumrc is > 0. The following works for me w/my mceusb driver and
> the default decoder ordering -- NEC and RC5 still fail, but RC6 still
> gets a crack at it, and successfully does its job.
>
> Signed-off-by: Jarod Wilson <jarod@redhat.com>
>
> ---
>  drivers/media/IR/ir-raw-event.c |    7 ++++---
>
> diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
> index ea68a3f..44162db 100644
> --- a/drivers/media/IR/ir-raw-event.c
> +++ b/drivers/media/IR/ir-raw-event.c
> @@ -36,14 +36,15 @@ static DEFINE_SPINLOCK(ir_raw_handler_lock);
>  */
>  #define RUN_DECODER(ops, ...) ({                                           \
>        struct ir_raw_handler           *_ir_raw_handler;                   \
> -       int _sumrc = 0, _rc;                                                \
> +       int _sumrc = 0, _rc, _fail;                                         \
>        spin_lock(&ir_raw_handler_lock);                                    \
>        list_for_each_entry(_ir_raw_handler, &ir_raw_handler_list, list) {  \
>                if (_ir_raw_handler->ops) {                                 \
>                        _rc = _ir_raw_handler->ops(__VA_ARGS__);            \
>                        if (_rc < 0)                                        \
> -                               break;                                      \
> -                       _sumrc += _rc;                                      \
> +                               _fail++;                                    \
> +                       else                                                \
> +                               _sumrc += _rc;                              \

Self-NAK. The only place we actually *care* about the retval from a
RUN_DECODER() call is in __ir_input_register(), and currently, its
looking for retval < 0, which is currently never possible. When we're
running the decoders, either they fail and return -EINVAL or they
succeed and return 0, and in the register case, we get either a
negative error (ex: -ENOMEM from rc6) or 0, so with the above, _sumrc
will *always* be 0 in the two cases I'm looking at. The third place
where RUN_DECODER gets called (decoder unregister) doesn't care about
the retval either. New patch below, including updated comments about
the macro.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:05:45 -03:00
Guennadi Liakhovetski 3b23db39b4 V4L/DVB: V4L2: fix sh_vou.c compile breakage: #include <slab.h>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:05:39 -03:00
Guennadi Liakhovetski e53a48053f V4L/DVB: sh_mobile_ceu_camera: fix debugging message
With enabled debugging sh_mobile_ceu_camera.c dereferences an invalid or a NULL
pointer. Thanks to James Wang for reporting.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:05:38 -03:00
Kuninori Morimoto e7d403f556 V4L/DVB: soc_camera_platform: Add necessary v4l2_subdev_video_ops method
These function are needed to use camera.
This patch was tested with sh_mobile_ceu_camera

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:05:37 -03:00
Stefan Richter e78483c5ae Merge firewire branches to be released post v2.6.35
Conflicts:
	drivers/firewire/core-card.c
	drivers/firewire/core-cdev.c

and forgotten #include <linux/time.h> in drivers/firewire/ohci.c

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-08-02 10:09:04 +02:00
Russell King d50f58bbd9 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable 2010-07-29 15:48:37 +01:00
Baruch Siach 79d3c2c239 mx2_camera: fix type of dma buffer virtual address pointer
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-28 09:29:01 +02:00
Baruch Siach 2066930de6 mx2_camera: Add soc_camera support for i.MX25/i.MX27
This is the soc_camera support developed by Sascha Hauer for the i.MX27.  Alan
Carvalho de Assis modified the original driver to get it working on more recent
kernels. I modified it further to add support for i.MX25. This driver has been
tested on i.MX25 and i.MX27 based platforms.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-28 09:28:36 +02:00
Pavel Machek a2531293db update email address
pavel@suse.cz no longer works, replace it with working address.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-19 10:56:54 +02:00
Jiri Kosina e3845deeb7 trivial: no changes to ov511 driver
This is a partial revert of 421f91d21a
("fix typos concerning "initiali[zs]e"") for ov511 driver, as it is
going to be completely removed in the next release anyway.

Fixes conflict in linux-next.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11 22:39:55 +02:00
Uwe Kleine-König 698f93159a fix comment/printk typos concerning "already"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11 21:45:40 +02:00
Uwe Kleine-König b27d63d8f8 fix comment typos concerning "sequential"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11 21:41:23 +02:00
Pawel Osciak b6ae906b04 V4L/DVB: v4l: mem2mem_testdev: fix g_fmt NULL pointer dereference
Calling g_fmt before s_fmt resulted in a NULL pointer dereference as no
default formats were being selected on probe.

Reported-by: Németh Márton <nm127@freemail.hu>
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08 16:50:24 -03:00
Laurent Pinchart 9c3b10b538 V4L/DVB: uvcvideo: Power line frequency control doesn't support GET_MIN/MAX/RES
Issuing a GET_MIN request on the power line frequency control times out
on at least the Apple iSight. As the UVC specification doesn't list
GET_MIN/MAX/RES as supported on that control, remove them from the
uvc_ctrls array.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08 16:50:16 -03:00
Ian Armstrong f06b9bd4c6 V4L/DVB: ivtv: Add delay to ensure the decoder always restarts with a blank screen
Add a short delay when stopping the decoder, allowing it to settle and
preventing some unexpected interaction with other firmware commands.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Tested-by: Martin Dauskardt <martin.dauskardt@gmx.de>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08 16:50:10 -03:00
Andy Walls 310e3be4c2 V4L/DVB: tveeprom: Add an entry for tuner code 168: a TCL M30WTP-4N-E tuner
Hauppauge EEPROM tuner code 168 has recently shown up on HVR-1600 TV
capture cards supported by the cx18 driver.  This change allows analog
tuner type autodetection to succeed for these cards.

Information for decoding tuner code 168 was provided by Hauppauge.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08 16:49:59 -03:00
Andy Walls 095c24710a V4L/DVB: tuner: Add a definition for the Philips FQ1236 MK5 NTSC tuner
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08 16:49:53 -03:00
Vaibhav Hiremath 691d38451c V4L/DVB: OMAP_VOUT: fix: Module params were not working through bootargs
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08 16:49:48 -03:00
Vaibhav Hiremath dd880dd477 V4L/DVB: OMAP_VOUT: fix: Replaced dma-sg with dma-contig
Actually OMAP doesn't support scatter-gather DMA for
Display subsystem but due to legacy coding it has been overlooked
till now.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08 16:49:37 -03:00
Vaibhav Hiremath 5ba9bb0ef6 V4L/DVB: OMAP_VOUT:Build FIX: Rebased against latest DSS2 changes
Changes -
	- Kconfig option dependancy changed to ARCH_OMAP2/3 from
	ARCH_OMAP24XX/34XX
	- There are some moments of function from omap_dss_device
	to omap_dss_driver. Incorporated changes for the same.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08 16:48:44 -03:00
Tejun Heo 7bc465605f ivtv: use kthread_worker instead of workqueue
Upcoming workqueue updates will no longer guarantee fixed workqueue to
worker kthread association, so giving RT priority to the irq worker
won't work.  Use kthread_worker which guarantees specific kthread
association instead.  This also makes setting the priority cleaner.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: ivtv-devel@ivtvdriver.org
Cc: linux-media@vger.kernel.org
2010-06-29 10:07:09 +02:00
Stefan Richter 33e553fe2b firewire: remove an unused function argument
void (*fw_address_callback_t)(..., int speed, ...) is the speed that a
remote node chose to transmit a request to us.  In case of split
transactions, firewire-core will transmit the response at that speed.

Upper layer drivers on the other hand (firewire-net, -sbp2, firedtv, and
userspace drivers) cannot do anything useful with that speed datum,
except log it for debug purposes.  But data that is merely potentially
(not even actually) used for debug purposes does not belong into the API.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-20 23:11:55 +02:00
Jiri Kosina f1bbbb6912 Merge branch 'master' into for-next 2010-06-16 18:08:13 +02:00
Uwe Kleine-König 421f91d21a fix typos concerning "initiali[zs]e"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-16 18:05:05 +02:00
Uwe Kleine-König 65155b3708 fix typos concerning "management"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-16 18:03:16 +02:00
Linus Torvalds e620d1e39a Merge branch 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (87 commits)
  V4L/DVB: ivtv: Timing tweaks and code re-order to try and improve stability
  V4L/DVB: ivtv: Avoid accidental video standard change
  V4L/DVB: ivtvfb : Module load / unload fixes
  V4L/DVB: cx2341x: Report correct temporal setting for log-status
  V4L/DVB: cx18, cx23885, v4l2 doc, MAINTAINERS: Update Andy Walls' email address
  V4L/DVB: drivers/media: Eliminate a NULL pointer dereference
  V4L/DVB: dvb-core: Fix ULE decapsulation bug
  V4L/DVB: Bug fix: make IR work again for dm1105
  V4L/DVB: media/IR: nec-decoder needs to select BITREV
  V4L/DVB: video/saa7134: change dprintk() to i2cdprintk()
  V4L/DVB: video/saa7134: remove duplicate break
  V4L/DVB: IR/imon: add auto-config for 0xffdc rf device
  V4L/DVB: IR/imon: clean up usage of bools
  V4L/DVB: em28xx: remove unneeded null checks
  V4L/DVB: ngene: remove unused #include <linux/version.h>
  V4L/DVB: ak881x needs slab.h
  V4L/DVB: FusionHDTV: Use quick reads for I2C IR device probing
  V4L/DVB: Technotrend S2-3200 ships with a TT 1500 remote
  V4L/DVB: drivers/media: Use kzalloc
  V4L/DVB: m920x: Select simple tuner
  ...
2010-06-04 15:38:12 -07:00
Wolfram Sang fbae3fb154 i2c: Remove all i2c_set_clientdata(client, NULL) in drivers
I2C drivers can use the clientdata-pointer to point to private data. As I2C
devices are not really unregistered, but merely detached from their driver, it
used to be the drivers obligation to clear this pointer during remove() or a
failed probe(). As a couple of drivers forgot to do this, it was agreed that it
was cleaner if the i2c-core does this clearance when appropriate, as there is
no guarantee for the lifetime of the clientdata-pointer after remove() anyhow.
This feature was added to the core with commit
e4a7b9b04d to fix the faulty drivers.

As there is no need anymore to clear the clientdata-pointer, remove all current
occurrences in the drivers to simplify the code and prevent confusion.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-06-03 11:33:58 +02:00
Ian Armstrong 666092c679 V4L/DVB: ivtv: Timing tweaks and code re-order to try and improve stability
Added small delay on device open & close to allow hardware to settle. Move yuv
register restore to before the decoder firmware call to stop playback.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:24:35 -03:00
Ian Armstrong bd62307b20 V4L/DVB: ivtv: Avoid accidental video standard change
For yuv video output, pass fake values to avoid firmware trying to change
video standard.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:24:33 -03:00
Ian Armstrong 5f39b9f660 V4L/DVB: ivtvfb : Module load / unload fixes
Check firmware state when loading module & if firmware is not responding exit
with an error. When module is unloaded, only disable the framebuffer & not all
decoder output.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:24:32 -03:00
Ian Armstrong 064a2485aa V4L/DVB: cx2341x: Report correct temporal setting for log-status
[Andy Walls comment:] This patch from Ian removes the cx2341x module lying
about the setting of the temporal filter for the log status ioctl().

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:24:31 -03:00
Andy Walls 6afdeaf865 V4L/DVB: cx18, cx23885, v4l2 doc, MAINTAINERS: Update Andy Walls' email address
A trivial change to update my email address from my dead awalls@radix.net
address to my current awalls@md.metrocast.net address.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:24:29 -03:00
Julia Lawall 4202066c69 V4L/DVB: drivers/media: Eliminate a NULL pointer dereference
In each case, the print involves dereferencing a value that is NULL or is
near NULL.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression E,E1;
identifier f;
statement S1,S2,S3;
@@

if ((E == NULL && ...) || ...)
{
  ... when != if (...) S1 else S2
      when != E = E1
* E->f
  ... when any
  return ...;
}
else S3
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:24:22 -03:00
Ang Way Chuang 5c331fc8c1 V4L/DVB: dvb-core: Fix ULE decapsulation bug
Fix ULE decapsulation bug when less than 4 bytes of ULE SNDU is packed
into the remaining bytes of a MPEG2-TS frame

ULE (Unidirectional Lightweight Encapsulation RFC 4326) decapsulation
code has a bug that incorrectly treats ULE SNDU packed into the
remaining 2 or 3 bytes of a MPEG2-TS frame as having invalid pointer
field on the subsequent MPEG2-TS frame.

Signed-off-by: Ang Way Chuang <wcang@nav6.org>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:24:21 -03:00
Igor M. Liplianin 84b14f181a V4L/DVB: Bug fix: make IR work again for dm1105
It makes IR to work again for dm1105 and, possibly, others.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:24:20 -03:00
Randy Dunlap 033608c1f3 V4L/DVB: media/IR: nec-decoder needs to select BITREV
Fix ir-nec-decoder build: it uses bitrev library code, so
select BITREVERSE in its Kconfig.

ir-nec-decoder.c:(.text+0x1a2517): undefined reference to `byte_rev_table'
ir-nec-decoder.c:(.text+0x1a2526): undefined reference to `byte_rev_table'
ir-nec-decoder.c:(.text+0x1a2530): undefined reference to `byte_rev_table'
ir-nec-decoder.c:(.text+0x1a2539): undefined reference to `byte_rev_table'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:24:18 -03:00
Dan Carpenter 129c34d8fc V4L/DVB: video/saa7134: change dprintk() to i2cdprintk()
The problem is that dprintk() dereferences "dev" which is null here.
The i2cdprintk() uses "ir" so that's OK.

Also Jean Delvare pointed out a typo in the comment so we may as well
fix that.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:24:17 -03:00
Dan Carpenter f0e5481f2f V4L/DVB: video/saa7134: remove duplicate break
The original code had two break statements in a row.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:23:27 -03:00
Jarod Wilson bbe4690f6c V4L/DVB: IR/imon: add auto-config for 0xffdc rf device
Add auto-config support for iMON 2.4G LT RF device, based on
debug output from Giulio Amodeo in Red Hat bugzilla #572288.

Also flips the switch on only setting up the rf associate sysfs
attr only if we think we're looking at an RF device, vs. previously,
setting up the attr for all 0xffdc devices, so its possible (but a bit
unlikely) there's another iMON RF device we'll have to fix up.

Nb: should be applied after "IR/imon: clean up usage of bools", or there
will be a slight contextual mismatch.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:23:26 -03:00
Jarod Wilson f789bf4013 V4L/DVB: IR/imon: clean up usage of bools
There was a mix of 0/1 and false/true. Pick one convention and stick
with it (I picked false/true).

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:23:25 -03:00
Dan Carpenter 517521e465 V4L/DVB: em28xx: remove unneeded null checks
The "dev" variable is used as a list cursor in a list_for_each_entry()
loop and can never be null here so I removed the check.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:23:23 -03:00
Huang Weiyi 7853d408b7 V4L/DVB: ngene: remove unused #include <linux/version.h>
Remove unused #include <linux/version.h>('s) in
  drivers/media/dvb/ngene/ngene-dvb.c
  drivers/media/dvb/ngene/ngene-i2c.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:23:22 -03:00
Randy Dunlap 1db2c22b22 V4L/DVB: ak881x needs slab.h
Add slab.h to fix ak881x build:

drivers/media/video/ak881x.c:265:error: implicit declaration of function 'kzalloc'
drivers/media/video/ak881x.c:265:warning: assignment makes pointer from integer without a cast
drivers/media/video/ak881x.c:283:error: implicit declaration of function 'kfree'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:23:21 -03:00
Jean Delvare 806b07c29b V4L/DVB: FusionHDTV: Use quick reads for I2C IR device probing
IR support on FusionHDTV cards is broken since kernel 2.6.31. One side
effect of the switch to the standard binding model for IR I2C devices
was to let i2c-core do the probing instead of the ir-kbd-i2c driver.
There is a slight difference between the two probe methods: i2c-core
uses 0-byte writes, while the ir-kbd-i2c was using 0-byte reads. As
some IR I2C devices only support reads, the new probe method fails to
detect them.

For now, revert to letting the driver do the probe, using 0-byte
reads. In the future, i2c-core will be extended to let callers of
i2c_new_probed_device() provide a custom probing function.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: "Timothy D. Lenz" <tlenz@vorgon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:23:19 -03:00
Hermann Gausterer f137f9d000 V4L/DVB: Technotrend S2-3200 ships with a TT 1500 remote
The Technotrend Budget S2-3200 ships with the
Technotrend 1500 bundled remote which is already supported.
Just add the right Subsystem Device ID.

Signed-off-by: Hermann Gausterer <git-kernel-2010@mrq1.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:23:18 -03:00
Julia Lawall 2ef17c9fc8 V4L/DVB: drivers/media: Use kzalloc
Use kzalloc rather than the combination of kmalloc and memset.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x,size,flags;
statement S;
@@

-x = kmalloc(size,flags);
+x = kzalloc(size,flags);
 if (x == NULL) S
-memset(x, 0, size);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:23:16 -03:00
Ben Hutchings 59fd08afe0 V4L/DVB: m920x: Select simple tuner
Update the Kconfig selections to match the code.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:22:16 -03:00
Ben Hutchings e245b0bd82 V4L/DVB: dib0700: Select dib0090 frontend
Update the Kconfig selections to match the code.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:22:15 -03:00
Ben Hutchings d46b36e7f9 V4L/DVB: budget: Select correct frontends
Update the Kconfig selections to match the code.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:22:14 -03:00
Ben Hutchings 9947e98a76 V4L/DVB: dw2102: Select tda10023 frontend, not tda10021
Update the Kconfig selections to match the code.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:22:13 -03:00
Randy Dunlap 58aac2bff1 V4L/DVB: [-next] IR: fix ir-nec-decoder build, select BITREVERSE
Fix ir-nec-decoder build: it uses bitrev library code, so
select BITREVERSE in its Kconfig.

ir-nec-decoder.c:(.text+0x1a2517): undefined reference to `byte_rev_table'
ir-nec-decoder.c:(.text+0x1a2526): undefined reference to `byte_rev_table'
ir-nec-decoder.c:(.text+0x1a2530): undefined reference to `byte_rev_table'
ir-nec-decoder.c:(.text+0x1a2539): undefined reference to `byte_rev_table'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:22:12 -03:00
Prarit Bhargava a49ba1674b V4L/DVB: Add notification to cxusb_dualdig4_rev2_frontend_attach() error handling
Add a notification to the dib7000p_i2c_enumeration() failure path in
cxusb_dualdig4_rev2_frontend_attach().

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:22:10 -03:00