acpi_processor_add() assumes that present at boot CPUs
are always onlined, it is not so if a CPU failed to become
onlined. As result acpi_processor_add() will mark such CPU
device as onlined in sysfs and following attempts to
online/offline it using /sys/device/system/cpu/cpuX/online
attribute will fail.
Do not poke into device internals in acpi_processor_add()
and touch "struct device { .offline }" attribute, since
for CPUs onlined at boot it's set by:
topology_init() -> arch_register_cpu() -> register_cpu()
before ACPI device tree is parsed, and for hotplugged
CPUs it's set when userspace onlines CPU via sysfs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According commit d640113fe (ACPI: processor: fix acpi_get_cpuid for UP
processor), BIOS may not provide _MAT or MADT tables and acpi_get_apicid()
always returns -1. For these cases, original code will pass apic_id with
vaule of -1 to acpi_map_cpuid() and it will check the acpi_id. If acpi_id
is equal to zero, ignores apic_id and return zero for CPU0.
Commit b981513 (ACPI / scan: bail out early if failed to parse APIC
ID for CPU) changed the behavior. Return ENODEV when find apic_id is
less than zero after calling acpi_get_apicid(). This causes acpi-cpufreq
driver fails to be loaded on some machines. This patch is to fix it.
Fixes: b981513f80 (ACPI / scan: bail out early if failed to parse APIC ID for CPU)
References: https://bugzilla.kernel.org/show_bug.cgi?id=73781
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Reported-and-tested-by: KATO Hiroshi <katoh@mikage.ne.jp>
Reported-and-tested-by: Stuart Foster <smf.linux@ntlworld.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-processor:
ACPI / scan: reduce log level of "ACPI: \_PR_.CPU4: failed to get CPU APIC ID"
ACPI / processor: Return specific error value when mapping lapic id
* acpi-hotplug:
ACPI / scan: Clear match_driver flag in acpi_bus_trim()
* acpi-init:
ACPI / init: Flag use of ACPI and ACPI idioms for power supplies to regulator API
* acpi-pm:
ACPI / PM: Use ACPI_COMPANION() to get ACPI companions of devices
* acpica:
ACPICA: Remove bool usage from ACPICA.
Commit b981513f80 (ACPI / scan: bail out early if failed to parse
APIC ID for CPU) emits an error message if ACPI processor driver fails
to query APIC ID for the CPU.
Originally it's designed to catch BIOS bugs for CPU hot-addition. But
it accidently reveals another type of BIOS bug that:
1) BIOS implements ACPI objects for all possible instead of present
CPUs. (It's valid to do that per ACPI specification.)
2) BIOS doesn't implement the _STA method for CPU objects. OSPM assumes
that all CPU objects are present and functioning and attempts to
use those CPU objects for CPU enumeration, which then triggers the
error message. According to ACPI spec, BIOS should implement _STA
for those absent CPUs at least.
Though it's a BIOS bug in essential, there are some BIOSes in the fields
which are implmented in this way. So reduce the log level from ERR to
DEBUG to accommodate these existing BIOSes.
Fixes: b981513f80 (ACPI / scan: bail out early if failed to parse APIC ID for CPU)
Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-gpe:
ACPI / EC: disable GPE before removing GPE handler
ACPI / Button: Fix enabling button GPEs twice
* acpi-video:
ACPI: Blacklist Win8 OSI for some HP laptop 2013 models
ACPI / video: Fix typo in video_detect.c
* acpi-thermal:
ACPI / thermal: remove const from thermal_zone_device_ops declaration
* acpi-processor:
ACPI / scan: bail out early if failed to parse APIC ID for CPU
* acpi-sleep:
ACPI / sleep: remove panic in case hardware has changed after S4
Enhance ACPI CPU hotplug driver to print clear error message and
bail out early if BIOS returns wrong value in ACPI MADT table or
_MAT method. Otherwise it will add the CPU device even if failed
to get APIC ID and fails any operations against sysfs interface:
/sys/devices/system/cpu/cpux/online
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is no reason to pass an ACPI handle to acpi_bind_one() instead
of a struct acpi_device pointer to the target device object, so
modify that function to take a struct acpi_device pointer as its
second argument and update all code depending on it accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Lan Tianyu <tianyu.lan@intel.com> # for USB/ACPI
acpi_get_processor_id() can be find nowhere, and the acpi id
is synchronized to APIC id when acpi_get_cpuid() is called, so
the comments can be removed.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_processor_errata() is only called in acpi_processor_get_info(),
and the argument 'pr' passed to acpi_processor_errata() will never be
NULL, so the if (!pr) check is unnecessary and can be removed.
Since the 'pr' argument is not used by acpi_processor_errata() any more,
so change the argument into void too.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
errata.smp is used by nowhere, so the variable assignment is meanless,
remove it.
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since APIC id is saved in processor struct, just use it and
remove the duplicated _MAT evaluation.
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For cpu hot add, we evaluate _MAT or parse MADT twice to get APIC id,
here is the code logic:
acpi_processor_add()
acpi_processor_get_info()
acpi_get_cpuid() will evaluate _MAT or parse MADT;
acpi_processor_hotadd_init()
acpi_map_lsapic() will evaluate _MAT again;
This can be done more effectively, this patch introduces apic_id in struct
processor to save parsed APIC id, and then we can use it and remove the
duplicated _MAT evaluation.
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_evaluate_integer() is an ACPI API introduced to evaluate an
ACPI control method that is known to have an integer return value.
This API can simplify the code because the calling function does not need to
use the specified acpi_buffer structure required by acpi_evaluate_object();
Convert acpi_evaluate_object() to acpi_evaluate_integer()
in drivers/acpi/acpi_processor.c in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CPU system maps are protected with reader/writer locks. The reader
lock, get_online_cpus(), assures that the maps are not updated while
holding the lock. The writer lock, cpu_hotplug_begin(), is used to
udpate the cpu maps along with cpu_maps_update_begin().
However, the ACPI processor handler updates the cpu maps without
holding the the writer lock.
acpi_map_lsapic() is called from acpi_processor_hotadd_init() to
update cpu_possible_mask and cpu_present_mask. acpi_unmap_lsapic()
is called from acpi_processor_remove() to update cpu_possible_mask.
Currently, they are either unprotected or protected with the reader
lock, which is not correct.
For example, the get_online_cpus() below is supposed to assure that
cpu_possible_mask is not changed while the code is iterating with
for_each_possible_cpu().
get_online_cpus();
for_each_possible_cpu(cpu) {
:
}
put_online_cpus();
However, this lock has no protection with CPU hotplug since the ACPI
processor handler does not use the writer lock when it updates
cpu_possible_mask. The reader lock does not serialize within the
readers.
This patch protects them with the writer lock with cpu_hotplug_begin()
along with cpu_maps_update_begin(), which must be held before calling
cpu_hotplug_begin(). It also protects arch_register_cpu() /
arch_unregister_cpu(), which creates / deletes a sysfs cpu device
interface. For this purpose it changes cpu_hotplug_begin() and
cpu_hotplug_done() to global and exports them in cpu.h.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
try_offline_node() checks that all CPUs associated with the given
node have been removed by using cpu_present_bits. If all cpus
related to that node have been removed, try_offline_node() clears
the node information.
However, try_offline_node() called from acpi_processor_remove() never
clears the node information. For disabling cpu_present_bits,
acpi_unmap_lsapic() needs be called. Yet, acpi_unmap_lsapic() is
called after try_offline_node() has run. So when try_offline_node()
runs, the CPU's cpu_present_bits is always set.
Fix the issue by moving try_offline_node() after acpi_unmap_lsapic().
The problem fixed here was uncovered by commit cecdb19 "ACPI / scan:
Change the implementation of acpi_bus_trim()".
[rjw: Changelog]
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Cc: 3.9+ <stable@vger.kernel.org> # 3.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
This removes all the drivers/acpi uses of the __cpuinit macros
from all C files.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Len Brown <lenb@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
In acpi_processor_add(), get_cpu_device() may return NULL in some cases
which is then passed to acpi_bind_one() and that will case a NULL
pointer dereference to occur.
Add a check to prevent that from happening.
[rjw: Changelog]
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make acpi_processor_add() pass the ACPI handle of the processor
namespace object to acpi_bind_one() instead of setting it directly
to allow acpi_bind_one() to catch possible bugs causing the ACPI
handle of the processor device to be set earlier.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Commit ac212b6 (ACPI / processor: Use common hotplug infrastructure)
forgot about initializing the per-CPU 'processors' variables which
lead to ACPI cpuidle failure to use C-states and caused boot slowdown
on multi-CPU machines.
Fix the problem by adding per_cpu(processors, pr->id) initialization
to acpi_processor_add() and add make acpi_processor_remove() clean it
up as appropriate.
Also modify acpi_processor_stop() so that it doesn't clear
per_cpu(processors, pr->id) on processor driver removal which would
then cause problems to happen when the driver is loaded again.
This version of the patch contains fixes from Yinghai Lu.
Reported-and-tested-by: Yinghai Lu <yinghai@kernel.org>
Reported-and-tested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Split the ACPI processor driver into two parts, one that is
non-modular, resides in the ACPI core and handles the enumeration
and hotplug of processors and one that implements the rest of the
existing processor driver functionality.
The non-modular part uses an ACPI scan handler object to enumerate
processors on the basis of information provided by the ACPI namespace
and to hook up with the common ACPI hotplug infrastructure. It also
populates the ACPI handle of each processor device having a
corresponding object in the ACPI namespace, which allows the driver
proper to bind to those devices, and makes the driver bind to them
if it is readily available (i.e. loaded) when the scan handler's
.attach() routine is running.
There are a few reasons to make this change.
First, switching the ACPI processor driver to using the common ACPI
hotplug infrastructure reduces code duplication and size considerably,
even though a new file is created along with a header comment etc.
Second, since the common hotplug code attempts to offline devices
before starting the (non-reversible) removal procedure, it will abort
(and possibly roll back) hot-remove operations involving processors
if cpu_down() returns an error code for one of them instead of
continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove
is unset). That is a more desirable behavior than what the current
code does.
Finally, the separation of the scan/hotplug part from the driver
proper makes it possible to simplify the driver's .remove() routine,
because it doesn't need to worry about the possible cleanup related
to processor removal any more (the scan/hotplug part is responsible
for that now) and can handle device removal and driver removal
symmetricaly (i.e. as appropriate).
Some user-visible changes in sysfs are made (for example, the
'sysdev' link from the ACPI device node to the processor device's
directory is gone and a 'physical_node' link is present instead
and a corresponding 'firmware_node' is present in the processor
device's directory, the processor driver is now visible under
/sys/bus/cpu/drivers/ and bound to the processor device), but
that shouldn't affect the functionality that users care about
(frequency scaling, C-states and thermal management).
Tested on my venerable Toshiba Portege R500.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Igor Mammedov