This functionality was tentatively added in the past
(commit 6533b7c16e ("powerpc: Initial stack protector
(-fstack-protector) support")) but had to be reverted
(commit f2574030b0 ("powerpc: Revert the initial stack
protector support") because of GCC implementing it differently
whether it had been built with libc support or not.
Now, GCC offers the possibility to manually set the
stack-protector mode (global or tls) regardless of libc support.
This time, the patch selects HAVE_STACKPROTECTOR only if
-mstack-protector-guard=tls is supported by GCC.
On PPC32, as register r2 points to current task_struct at
all time, the stack_canary located inside task_struct can be
used directly by using the following GCC options:
-mstack-protector-guard=tls
-mstack-protector-guard-reg=r2
-mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary))
The protector is disabled for prom_init and bootx_init as
it is too early to handle it properly.
$ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT
[ 134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64
[ 134.943666]
[ 134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835
[ 134.963380] Call Trace:
[ 134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable)
[ 134.971775] [c6615dc0] [c001f654] panic+0x0/0x260
[ 134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64
[ 134.982769] [c6615e00] [ffffffff] 0xffffffff
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the dereference of xc below the NULL test.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we look up dtl_idx in
the lppaca to determine the number of entries in the buffer. Since
lppaca is in big endian, we need to do an endian conversion before using
this in our calculation to determine the number of entries in the
buffer. Without this, we do not iterate over the existing entries in the
DTL buffer properly.
Fixes: 7c105b63bd ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we register the DTL
buffer for a cpu when the associated file under powerpc/dtl in debugfs
is opened. When doing so, we need to set the size of the buffer being
registered in the second u32 word of the buffer. This needs to be in big
endian, but we are not doing the conversion resulting in the below error
showing up in dmesg:
dtl_start: DTL registration for cpu 0 (hw 0) failed with -4
Fix this in the obvious manner.
Fixes: 7c105b63bd ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PPC32 uses nonrecoverable_exception() while PPC64 uses
unrecoverable_exception().
Both functions are doing almost the same thing.
This patch removes nonrecoverable_exception()
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of calling both of_irq_parse_one() and
irq_create_of_mapping(), call of_irq_get() instead which does
essentially the same thing. of_irq_get() also calls irq_find_host()
for deferred probe support, but this should be fine as
irq_create_of_mapping() also calls that internally. This gets us
closer to making the former 2 functions static.
In the process of simplifying request_event_sources_irqs(), combine
the the pr_err() and WARN_ON() calls to just a WARN().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of calling both of_irq_parse_one() and
irq_create_of_mapping(), call of_irq_parse_and_map() instead which
does the same thing. This gets us closer to making the former 2
functions static.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We need to make sure pmd_trans_huge returns false for a pmd migration entry.
We mark the migration entry by clearing the _PAGE_PRESENT bit. We keep the
_PAGE_PTE bit set to indicate a leaf page table entry. Hence we need to make
sure we check for pmd_present() so that pmd_trans_huge won't return true on
pmd migration entry.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Make sure we are operating on THP and hugetlb entries in the respective hash
fault handling routines.
No functional change in this patch. If we walked the table wrongly before, we
will retry the access.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Update few code paths to check for pmd_large.
set_pmd_at:
We want to use this to store swap pte at pmd level. For swap ptes we don't want
to set H_PAGE_THP_HUGE. Hence check for pmd_large in set_pmd_at. This remove
the false WARN_ON when using this with swap pmd entry.
pmd_page:
We don't really use them on pmd migration entries. But they can also work with
migration entries and we don't differentiate at the pte level. Hence update
pmd_page to work with pmd migration entries too
__find_linux_pte:
lockless page table walk need to handle pmd migration entries. pmd_trans_huge
check will return false on them. We don't set thp = 1 for such entries, but
update hpage_shift correctly. Without this we will walk pmd migration entries
as a pte page pointer which is wrong.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This make hugetlb directory pointer similar to other page able entries. A hugepd
entry is identified by lack of _PAGE_PTE bit set and directory size stored in
HUGEPD_SHIFT_MASK. We update that to also look at _PAGE_PRESENT
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With this patch we use 0x8000000000000000UL (_PAGE_PRESENT) to indicate a valid
pgd/pud/pmd entry. We also switch the p**_present() to look at this bit.
With pmd_present, we have a special case. We need to make sure we consider a
pmd marked invalid during THP split as present. Right now we clear the
_PAGE_PRESENT bit during a pmdp_invalidate. Inorder to consider this special
case we add a new pte bit _PAGE_INVALID (mapped to _RPAGE_SW0). This bit is
only used with _PAGE_PRESENT cleared. Hence we are not really losing a pte bit
for this special case. pmd_present is also updated to look at _PAGE_INVALID.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ever since fast reboot is enabled by default in opal,
opal_cec_reboot() will use fast-reset instead of full IPL to perform
system reboot. This leaves the user with no direct way to force a full
IPL reboot except changing an nvram setting that persistently disables
fast-reset for all subsequent reboots.
This patch provides a more direct way for the user to force a one-shot
full IPL reboot by passing the command line argument 'full' to the
reboot command. So the user will be able to tweak the reboot behavior
via:
$ sudo reboot full # Force a full ipl reboot skipping fast-reset
or
$ sudo reboot # default reboot path (usually fast-reset)
The reboot command passes the un-parsed command argument to the kernel
via the 'Reboot' syscall which is then passed on to the arch function
pnv_restart(). The patch updates pnv_restart() to handle this cmd-arg
and issues opal_cec_reboot2 with OPAL_REBOOT_FULL_IPL to force a full
IPL reset.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In power7_marked_instr_event() there is a switch case that is missing
a break or an explicit fallthrough, it's not immediately clear which
it should be.
The function determines based on the PMU event code, whether the event
is a "marked" event (which then requires us to configure the PMU in a
certain way). On Power7 there is no specific bit(s) in the event to
tell us that, we just have to know.
Rather than having a full list of every event and whether they are
marked, we pull apart the event code and for events with certain
values of certain fields we can say that those are all marked events.
We take the psel (bits 0-7) of the event, and look at bits 4-7. For a
value of 6 we say that if the entire psel == 0x64 then if the pmc == 3
the event is marked, else not, and otherwise we continue.
It is then that we fallthrough to the 8 case, where we return true if
the unit == 0xd.
The question is should the 6 case also fallthrough and check for
unit == 0xd, or should it return.
Looking at the full list of events we see that there are zero events
where (psel >> 4) == 0x6 and unit == 0xd.
So the answer is it doesn't really matter, there are no valid event
codes that will return a different result whether we fallthrough or
break.
But equally, testing the 6 case events against unit == 0xd is slightly
bogus, as there are no such events. So to make the code clearer, and
avoid any future confusion, have the 6 case break rather than falling
through.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
This reverts commits:
5e46e29e6a ("powerpc/64s/hash: convert SLB miss handlers to C")
8fed04d0f6 ("powerpc/64s/hash: remove user SLB data from the paca")
655deecf67 ("powerpc/64s/hash: SLB allocation status bitmaps")
2e1626744e ("powerpc/64s/hash: provide arch_setup_exec hooks for hash slice setup")
89ca4e126a ("powerpc/64s/hash: Add a SLB preload cache")
This series had a few bugs, and the fixes are not all trivial. So
revert most of it for now.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Firmware-Assisted Dump (FADump) needs to be registered again after any
memory hot add/remove operation to update the crash memory ranges. But
currently, the kernel returns '-EEXIST' if we try to register without
uregistering it first. This could expose the system to racing issues
while unregistering and registering FADump from userspace during udev
events. Spare the userspace of this and let it be taken care of in the
kernel space for a simpler interface.
Since this change, running 'echo 1 > /sys/kernel/fadump_registered'
would result in re-regisering (unregistering and registering) FADump,
if it was already registered.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In lparcfg_write we hard code kbuf_sz and then use this as the variable
length of kbuf creating a variable length array. Since we're hard coding
the length anyway just define the array using this as the length and
remove the need for kbuf_sz, thus removing the variable length array.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In prom_check_platform_support() we retrieve and parse the
"ibm,arch-vec-5-platform-support" property of the chosen node.
Currently we use a variable length array however to avoid this use an
array of constant length 8.
This property is used to indicate the supported options of vector 5
bytes 23-26 of the ibm,architecture.vec node. Each of these options
is a pair of bytes, thus for 4 options we have a max length of 8 bytes.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This re-applies commit b91c1e3e7a ("powerpc: Fix duplicate const
clang warning in user access code") (Jun 2015) which was undone in
commits:
f2ca809059 ("powerpc/sparse: Constify the address pointer in __get_user_nosleep()") (Feb 2017)
d466f6c5ca ("powerpc/sparse: Constify the address pointer in __get_user_nocheck()") (Feb 2017)
f84ed59a61 ("powerpc/sparse: Constify the address pointer in __get_user_check()") (Feb 2017)
We see a large number of duplicate const errors in the user access
code when building with llvm/clang:
include/linux/pagemap.h:576:8: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier]
ret = __get_user(c, uaddr);
The problem is we are doing const __typeof__(*(ptr)), which will hit
the warning if ptr is marked const.
Removing const does not seem to have any effect on GCC code
generation.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When building with clang crt0's _zimage_start is not marked weak, which
breaks the build when linking the kernel image:
$ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$
0000000000000058 g .text 0000000000000000 _zimage_start
ld: arch/powerpc/boot/wrapper.a(crt0.o): in function '_zimage_start':
(.text+0x58): multiple definition of '_zimage_start';
arch/powerpc/boot/pseries-head.o:(.text+0x0): first defined here
Clang requires the .weak directive to appear after the symbol is
declared. The binutils manual says:
This directive sets the weak attribute on the comma separated list of
symbol names. If the symbols do not already exist, they will be
created.
So it appears this is different with clang. The only reference I could
see for this was an OpenBSD mailing list post[1].
Changing it to be after the declaration fixes building with Clang, and
still works with GCC.
$ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$
0000000000000058 w .text 0000000000000000 _zimage_start
Reported to clang as https://bugs.llvm.org/show_bug.cgi?id=38921
[1] https://groups.google.com/forum/#!topic/fa.openbsd.tech/PAgKKen2YCY
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Disable new features from recent releases, and clean out some other
unused options:
- Enable EXPERT, so we can disable some things
- Disable non-powerpc BPF decoders
- Disable TASKSTATS
- Disable unused syscalls
- Set more things to be modules
- Turn off unused network vendors
- PPC_OF_BOOT_TRAMPOLINE and FB_OF are unused on powernv
- Drop unused Radeon and Matrox GPU drivers
- IPV6 support landed in petitboot
- Bringup related command line powersave=off dropped, switch to quiet
Set CONFIG_I2C_CHARDEV=y as the module is not loaded automatically, and
without this i2cget etc. will fail in the skiroot environment.
This defconfig gets us build coverage of KERNEL_XZ, which was broken in
the 4.19 merge window for powerpc.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When performing partition migrations all present CPUs must be online
as all present CPUs must make the H_JOIN call as part of the migration
process. Once all present CPUs make the H_JOIN call, one CPU is returned
to make the rtas call to perform the migration to the destination system.
During testing of migration and changing the SMT state we have found
instances where CPUs are offlined, as part of the SMT state change,
before they make the H_JOIN call. This results in a hung system where
every CPU is either in H_JOIN or offline.
To prevent this this patch disables CPU hotplug during the migration
process.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are three instances in which dlpar hotplug events are invoked;
handling a hotplug interrupt (in a kvm guest), handling a dlpar
request through sysfs, and updating LMB affinity when handling a
PRRN event. Only in the case of handling a hotplug interrupt do we
have to put the work on a workqueue, the other cases can handle the
dlpar request directly.
This patch exports the handle_dlpar_errorlog() function so that
dlpar hotplug events can be handled directly and updates the two
instances mentioned above to use the direct invocation.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The updates to powerpc numa and memory hotplug code now use the
in-kernel LMB array instead of the device tree. This change allows the
pseries memory DLPAR code to only update the device tree once after
successfully handling a DLPAR request.
Prior to the in-kernel LMB array, the numa code looked up the affinity
for memory being added in the device tree, the code now looks this up
in the LMB array. This change means the memory hotplug code can just
update the affinity for an LMB in the LMB array instead of updating
the device tree.
This also provides a savings in kernel memory. When updating the
device tree old properties are never free'ed since there is no
usecount on properties. This behavior leads to a new copy of the
property being allocated every time a LMB is added or removed (i.e. a
request to add 100 LMBs creates 100 new copies of the property). With
this update only a single new property is created when a DLPAR request
completes successfully.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
GCC 4.6 is the minimum supported now.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When switching processes, currently all user SLBEs are cleared, and a
few (exec_base, pc, and stack) are preloaded. In trivial testing with
small apps, this tends to miss the heap and low 256MB segments, and it
will also miss commonly accessed segments on large memory workloads.
Add a simple round-robin preload cache that just inserts the last SLB
miss into the head of the cache and preloads those at context switch
time. Every 256 context switches, the oldest entry is removed from the
cache to shrink the cache and require fewer slbmte if they are unused.
Much more could go into this, including into the SLB entry reclaim
side to track some LRU information etc, which would require a study of
large memory workloads. But this is a simple thing we can do now that
is an obvious win for common workloads.
With the full series, process switching speed on the context_switch
benchmark on POWER9/hash (with kernel speculation security masures
disabled) increases from 140K/s to 178K/s (27%).
POWER8 does not change much (within 1%), it's unclear why it does not
see a big gain like POWER9.
Booting to busybox init with 256MB segments has SLB misses go down
from 945 to 69, and with 1T segments 900 to 21. These could almost all
be eliminated by preloading a bit more carefully with ELF binary
loading.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This will be used by the SLB code in the next patch, but for now this
sets the slb_addr_limit to the correct size for 32-bit tasks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add 32-entry bitmaps to track the allocation status of the first 32
SLB entries, and whether they are user or kernel entries. These are
used to allocate free SLB entries first, before resorting to the round
robin allocator.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
User SLB mappig data is copied into the PACA from the mm->context so
it can be accessed by the SLB miss handlers.
After the C conversion, SLB miss handlers now run with relocation on,
and user SLB misses are able to take recursive kernel SLB misses, so
the user SLB mapping data can be removed from the paca and accessed
directly.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch moves SLB miss handlers completely to C, using the standard
exception handler macros to set up the stack and branch to C.
This can be done because the segment containing the kernel stack is
always bolted, so accessing it with relocation on will not cause an
SLB exception.
Arbitrary kernel memory may not be accessed when handling kernel space
SLB misses, so care should be taken there. However user SLB misses can
access any kernel memory, which can be used to move some fields out of
the paca (in later patches).
User SLB misses could quite easily reconcile IRQs and set up a first
class kernel environment and exit via ret_from_except, however that
doesn't seem to be necessary at the moment, so we only do that if a
bad fault is encountered.
[ Credit to Aneesh for bug fixes, error checks, and improvements to bad
address handling, etc ]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Since RFC:
- Added MSR[RI] handling
- Fixed up a register loss bug exposed by irq tracing (Aneesh)
- Reject misses outside the defined kernel regions (Aneesh)
- Added several more sanity checks and error handling (Aneesh), we may
look at consolidating these tests and tightenig up the code but for
a first pass we decided it's better to check carefully.
Since v1:
- Fixed SLB cache corruption (Aneesh)
- Fixed untidy SLBE allocation "leak" in get_vsid error case
- Now survives some stress testing on real hardware
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 introduces SLBIA IH=3, which invalidates all SLB entries and
associated lookaside information that have a class value of 1, which
Linux assigns to user addresses. This matches what switch_slb wants,
and allows a simple fast implementation that avoids the slb_cache
complexity.
As a side-effect, the POWER5 < DD2.1 SLB invalidation workaround is
also avoided on POWER9.
Process context switching rate is improved about 2.2% for a small
process that hits the slb cache which is the best case for the current
code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The SLBIA IH=1 hint will remove all non-zero SLBEs, but only
invalidate ERAT entries associated with a class value of 1, for
processors that support the hint (e.g., POWER6 and newer), which
Linux assigns to user addresses.
This prevents kernel ERAT entries from being invalidated when
context switchig (if the thread faulted in more than 8 user SLBEs).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove the vmalloc segment from bolted SLBEs. This is not required to
be bolted, and seems like it was added to help pre-load the SLB on
context switch. However there are now other segments like the vmemmap
segment and non-zero node memory that often take misses after a context
switch, so it is better to solve this in a more general way.
A subsequent change will track free SLB entries and uses those rather
than round-robin overwrite valid entries, which makes it far less
likely for kernel SLBEs to be evicted after they are installed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The POWER5 < DD2.1 issue is that slbie needs to be issued more than
once. It came in with this change:
ChangeSet@1.1608, 2004-04-29 07:12:31-07:00, david@gibson.dropbear.id.au
[PATCH] POWER5 erratum workaround
Early POWER5 revisions (<DD2.1) have a problem requiring slbie
instructions to be repeated under some circumstances. The patch below
adds a workaround (patch made by Anton Blanchard).
(aka. 3e4520f7605243abf66a7ccd3d2e49e48e8c0483 in the full history tree)
The extra slbie in switch_slb is done even for the case where slbia is
called (slb_flush_and_rebolt). I don't believe that is required
because there are other slb_flush_and_rebolt callers which do not
issue the workaround slbie, which would be broken if it was required.
It also seems to be fine inside the isync with the first slbie, as it
is in the kernel stack switch code.
So move this workaround to where it is required. This is not much of
an optimisation because this is the fast path, but it makes the code
more understandable and neater.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Retain slbie_data initialisation to avoid compiler warning]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
I only have POWER8/9 to test, so just remove it for those.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This causes SLB alloation to start 1 beyond the start of the SLB.
There is no real problem because after it wraps it stats behaving
properly, it's just surprisig to see when looking at SLB traces.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that other platforms also implements real mode mce handler,
lets consolidate the code by sharing existing powernv machine check
early code. Rename machine_check_powernv_early to
machine_check_common_early and reuse the code.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Extract the MCE error details from RTAS extended log and display it to
console.
With this patch you should now see mce logs like below:
[ 142.371818] Severe Machine check interrupt [Recovered]
[ 142.371822] NIP [d00000000ca301b8]: init_module+0x1b8/0x338 [bork_kernel]
[ 142.371822] Initiator: CPU
[ 142.371823] Error type: SLB [Multihit]
[ 142.371824] Effective address: d00000000ca70000
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On pseries, as of today system crashes if we get a machine check
exceptions due to SLB errors. These are soft errors and can be fixed
by flushing the SLBs so the kernel can continue to function instead of
system crash. We do this in real mode before turning on MMU. Otherwise
we would run into nested machine checks. This patch now fetches the
rtas error log in real mode and flushes the SLBs on SLB/ERAT errors.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michal Suchanek <msuchanek@suse.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On pseries, the machine check error details are part of RTAS extended
event log passed under Machine check exception section. This patch adds
the definition of rtas MCE event section and related helper
functions.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The tbl pointer is being derefenced by IOMMU_PAGE_SIZE prior the check
if it is not NULL.
Just moving the dereference code to after the check, where there will
be guarantee that 'tbl' will not be NULL.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Function xive_native_get_ipi() might use chip_id without it being
initialized, if the CPU node is not found, as reported by smatch:
error: uninitialized symbol 'chip_id'
As suggested by Cédric, we can use xc->chip_id instead of consulting
the device tree for chip id, which is safe since xive_prepare_cpu()
should have initialized ->chip_id by the time xive_native_get_ipi() is
called.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[mpe: Tweak change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When hot-removing memory release_mem_region_adjustable() splits iomem
resources if they are not the exact size of the memory being
hot-deleted. Adding this memory back to the kernel adds a new resource.
Eg a node has memory 0x0 - 0xfffffffff. Hot-removing 1GB from
0xf40000000 results in the single resource 0x0-0xfffffffff being split
into two resources: 0x0-0xf3fffffff and 0xf80000000-0xfffffffff.
When we hot-add the memory back we now have three resources:
0x0-0xf3fffffff, 0xf40000000-0xf7fffffff, and 0xf80000000-0xfffffffff.
This is an issue if we try to remove some memory that overlaps
resources. Eg when trying to remove 2GB at address 0xf40000000,
release_mem_region_adjustable() fails as it expects the chunk of memory
to be within the boundaries of a single resource. We then get the
warning: "Unable to release resource" and attempting to use memtrace
again gives us this error: "bash: echo: write error: Resource
temporarily unavailable"
This patch makes memtrace remove memory in chunks that are always the
same size from an address that is always equal to end_of_memory -
n*size, for some n. So hotremoving and hotadding memory of different
sizes will now not attempt to remove memory that spans multiple
resources.
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Christophe Leroy