Clean up: Completion status is already reported in the individual
completion handlers. Save a few bytes in struct svc_rdma_op_ctxt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: sc_dma_used is not required for correct operation. It is
simply a debugging tool to report when svcrdma has leaked DMA maps.
However, manipulating an atomic has a measurable CPU cost, and DMA
map accounting specific to svcrdma will be meaningless once svcrdma
is converted to use the new generic r/w API.
A similar kind of debug accounting can be done simply by enabling
the IOMMU or by using CONFIG_DMA_API_DEBUG, CONFIG_IOMMU_DEBUG, and
CONFIG_IOMMU_LEAK.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
svcrdma's current SQ accounting algorithm takes sc_lock and disables
bottom-halves while posting all RDMA Read, Write, and Send WRs.
This is relatively heavyweight serialization. And note that Write and
Send are already fully serialized by the xpt_mutex.
Using a single atomic_t should be all that is necessary to guarantee
that ib_post_send() is called only when there is enough space on the
send queue. This is what the other RDMA-enabled storage targets do.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current sendto code appears to support clients that provide only
one of a Read list, a Write list, or a Reply chunk. My reading of
that code is that it doesn't support the following cases:
- Read list + Write list
- Read list + Reply chunk
- Write list + Reply chunk
- Read list + Write list + Reply chunk
The protocol allows more than one Read or Write chunk in those
lists. Some clients do send a Read list and Reply chunk
simultaneously. NFSv4 WRITE uses a Read list for the data payload,
and a Reply chunk because the GETATTR result in the reply can
contain a large object like an ACL.
Generalize one of the sendto code paths needed to support all of
the above cases, and attempt to ensure that only one pass is done
through the RPC Call's transport header to gather chunk list
information for building the reply.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Support Remote Invalidation. A private message is exchanged with
the client upon RDMA transport connect that indicates whether
Send With Invalidation may be used by the server to send RPC
replies. The invalidate_rkey is arbitrarily chosen from among
rkeys present in the RPC-over-RDMA header's chunk lists.
Send With Invalidate improves performance only when clients can
recognize, while processing an RPC reply, that an rkey has already
been invalidated. That has been submitted as a separate change.
In the future, the RPC-over-RDMA protocol might support Remote
Invalidation properly. The protocol needs to enable signaling
between peers to indicate when Remote Invalidation can be used
for each individual RPC.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The ctxt's count field is overloaded to mean the number of pages in
the ctxt->page array and the number of SGEs in the ctxt->sge array.
Typically these two numbers are the same.
However, when an inline RPC reply is constructed from an xdr_buf
with a tail iovec, the head and tail often occupy the same page,
but each are DMA mapped independently. In that case, ->count equals
the number of pages, but it does not equal the number of SGEs.
There's one more SGE, for the tail iovec. Hence there is one more
DMA mapping than there are pages in the ctxt->page array.
This isn't a real problem until the server's iommu is enabled. Then
each RPC reply that has content in that iovec orphans a DMA mapping
that consists of real resources.
krb5i and krb5p always populate that tail iovec. After a couple
million sent krb5i/p RPC replies, the NFS server starts behaving
erratically. Reboot is needed to clear the problem.
Fixes: 9d11b51ce7 ("svcrdma: Fix send_reply() scatter/gather set-up")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Pass in just the piece of the svc_rqst that is needed
here.
While we're in the area, add an informative documenting comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Calling ib_poll_cq() to sort through WCs during a completion is a
common pattern amongst RDMA consumers. Since commit 14d3a3b249
("IB: add a proper completion queue abstraction"), WC sorting can
be handled by the IB core.
By converting to this new API, svcrdma is made a better neighbor to
other RDMA consumers, as it allows the core to schedule the delivery
of completions more fairly amongst all active consumers.
This new API also aims each completion at a function that is
specific to the WR's opcode. Thus the ctxt->wr_op field and the
switch in process_context is replaced by a set of methods that
handle each completion type.
Because each ib_cqe carries a pointer to a completion method, the
core can now post operations on a consumer's QP, and handle the
completions itself.
The server's rdma_stat_sq_poll and rdma_stat_sq_prod metrics are no
longer updated.
As a clean up, the cq_event_handler, the dto_tasklet, and all
associated locking is removed, as they are no longer referenced or
used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Calling ib_poll_cq() to sort through WCs during a completion is a
common pattern amongst RDMA consumers. Since commit 14d3a3b249
("IB: add a proper completion queue abstraction"), WC sorting can
be handled by the IB core.
By converting to this new API, svcrdma is made a better neighbor to
other RDMA consumers, as it allows the core to schedule the delivery
of completions more fairly amongst all active consumers.
Because each ib_cqe carries a pointer to a completion method, the
core can now post operations on a consumer's QP, and handle the
completions itself.
svcrdma receive completions no longer use the dto_tasklet. Each
polled Receive WC is now handled individually in soft IRQ context.
The server transport's rdma_stat_rq_poll and rdma_stat_rq_prod
metrics are no longer updated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When constructing an error reply, svc_rdma_xdr_encode_error()
needs to view the client's request message so it can get the
failing request's XID.
svc_rdma_xdr_decode_req() is supposed to return a pointer to the
client's request header. But if it fails to decode the client's
message (and thus an error reply is needed) it does not return the
pointer. The server then sends a bogus XID in the error reply.
Instead, unconditionally generate the pointer to the client's header
in svc_rdma_recvfrom(), and pass that pointer to both functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Tested-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix several issues with svc_rdma_send_error():
- Post a receive buffer to replace the one that was consumed by
the incoming request
- Posting a send should use DMA_TO_DEVICE, not DMA_FROM_DEVICE
- No need to put_page _and_ free pages in svc_rdma_put_context
- Make sure the sge is set up completely in case the error
path goes through svc_rdma_unmap_dma()
- Replace the use of ENOSYS, which has a reserved meaning
Related fixes in svc_rdma_recvfrom():
- Don't leak the ctxt associated with the incoming request
- Don't close the connection after sending an error reply
- Let svc_rdma_send_error() figure out the right header error code
As a last clean up, move svc_rdma_send_error() to svc_rdma_sendto.c
with other similar functions. There is some common logic in these
functions that could someday be combined to reduce code duplication.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Tested-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Most svc_rdma_post_recv() call sites close the transport
connection when a receive cannot be posted. Wrap that in a common
helper.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Tested-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The NFS server's XDR encoders adds an XDR pad for content in the
xdr_buf page list at the beginning of the xdr_buf's tail buffer.
On RDMA transports, Write chunks are sent separately and without an
XDR pad.
If a Write chunk is being sent, strip off the pad in the tail buffer
so that inline content following the Write chunk remains XDR-aligned
when it is sent to the client.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=294
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We now alwasy have a per-PD local_dma_lkey available. Make use of that
fact in svc_rdma and stop registering our own MR.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
To support the server-side of an NFSv4.1 backchannel on RDMA
connections, add a transport class that enables backward
direction messages on an existing forward channel connection.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Extra resources for handling backchannel requests have to be
pre-allocated when a transport instance is created. Set up
additional fields in svcxprt_rdma to track these resources.
The max_requests fields are elements of the RPC-over-RDMA
protocol, so they should be u32. To ensure that unsigned
arithmetic is used everywhere, some other fields in the
svcxprt_rdma struct are updated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pre-requisite to use map_xdr in the backchannel code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
svc_rdma_post_recv() allocates pages for receive buffers on-demand.
It uses GFP_KERNEL so the allocator tries hard, and may sleep. But
I'm about to add a call to svc_rdma_post_recv() from a function
that may not sleep.
Since all svc_rdma_post_recv() call sites can tolerate its failure,
allow it to fail if the page allocator returns nothing. Longer term,
receive buffers, being a finite resource per-connection, should be
pre-allocated and re-used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
To ensure this allocation cannot fail and will not sleep,
pre-allocate the req_map structures per-connection.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When the maximum payload size of NFS READ and WRITE was increased
by commit cc9a903d91 ("svcrdma: Change maximum server payload back
to RPCSVC_MAXPAYLOAD"), the size of struct svc_rdma_op_ctxt
increased to over 6KB (on x86_64). That makes allocating one of
these from a kmem_cache more likely to fail in situations when
system memory is exhausted.
Since I'm about to add a caller where this allocation must always
work _and_ it cannot sleep, pre-allocate ctxts for each connection.
Another motivation for this change is that NFSv4.x servers are
required by specification not to drop NFS requests. Pre-allocating
memory resources reduces the likelihood of a drop.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Highlights include:
Features:
- RDMA client backchannel from Chuck
- Support for NFSv4.2 file CLONE using the btrfs ioctl
Bugfixes + cleanups
- Move socket data receive out of the bottom halves and into a workqueue
- Refactor NFSv4 error handling so synchronous and asynchronous RPC handles
errors identically.
- Fix a panic when blocks or object layouts reads return a bad data length
- Fix nfsroot so it can handle a 1024 byte long path.
- Fix bad usage of page offset in bl_read_pagelist
- Various NFSv4 callback cleanups+fixes
- Fix GETATTR bitmap verification
- Support hexadecimal number for sunrpc debug sysctl files
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWQPMXAAoJEGcL54qWCgDy6ZUQAL32vpgyMXe7R4jcxoQxm52+
tn8FrY8aBZAqucvQsIGCrYfE01W/s8goDTQdZODn0MCcoor12BTPVYNIR42/J/no
MNnRTDF0dJ4WG+inX9G87XGG6sFN3wDaQcCaexknkQZlFNF4KthxojzR2BgjmRVI
p3WKkLSNTt6DYQQ8eDetvKoDT0AjR/KCYm89tiE8GMhKYcaZl6dTazJxwOcp2CX9
YDW6+fQbsv8qp5v2ay03e88O/DSmcNRFoxy/KUGT9OwJgdN08IN8fTt6GG38yycT
D9tb9uObBRcll4PnucouadBcykGr6jAP0z8HklE266LH1dwYLOHQoDFdgAs0QGtq
nlySiKvToj6CYXonXoPOjZF3P/lxlkj5ViZ2enBxgxrPmyWl172cUSa6NTXOMO46
kPpxw50xa1gP5kkBVwIZ6XZuzl/5YRhB3BRP3g6yuJCbAwVBJvawYU7riC+6DEB9
zygVfm21vi9juUQXJ37zXVRBTtoFhFjuSxcAYxc63o181lWYShKQ3IiRYg+zTxnq
7DOhXa0ZNGvMgJJi0tH9Es3/S6TrGhyKh5gKY/o2XUjY0hCSsCSdP6jw6Mb9Ax1s
0LzByHAikxBKPt2OFeoUgwycI2xqow4iAfuFk071iP7n0nwC804cUHSkGxW67dBZ
Ve5Skkg1CV+oWQYxGmGZ
=py1V
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.4-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
New features:
- RDMA client backchannel from Chuck
- Support for NFSv4.2 file CLONE using the btrfs ioctl
Bugfixes + cleanups:
- Move socket data receive out of the bottom halves and into a
workqueue
- Refactor NFSv4 error handling so synchronous and asynchronous RPC
handles errors identically.
- Fix a panic when blocks or object layouts reads return a bad data
length
- Fix nfsroot so it can handle a 1024 byte long path.
- Fix bad usage of page offset in bl_read_pagelist
- Various NFSv4 callback cleanups+fixes
- Fix GETATTR bitmap verification
- Support hexadecimal number for sunrpc debug sysctl files"
* tag 'nfs-for-4.4-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (53 commits)
Sunrpc: Supports hexadecimal number for sysctl files of sunrpc debug
nfs: Fix GETATTR bitmap verification
nfs: Remove unused xdr page offsets in getacl/setacl arguments
fs/nfs: remove unnecessary new_valid_dev check
SUNRPC: fix variable type
NFS: Enable client side NFSv4.1 backchannel to use other transports
pNFS/flexfiles: Add support for FF_FLAGS_NO_IO_THRU_MDS
pNFS/flexfiles: When mirrored, retry failed reads by switching mirrors
SUNRPC: Remove the TCP-only restriction in bc_svc_process()
svcrdma: Add backward direction service for RPC/RDMA transport
xprtrdma: Handle incoming backward direction RPC calls
xprtrdma: Add support for sending backward direction RPC replies
xprtrdma: Pre-allocate Work Requests for backchannel
xprtrdma: Pre-allocate backward rpc_rqst and send/receive buffers
SUNRPC: Abstract backchannel operations
xprtrdma: Saving IRQs no longer needed for rb_lock
xprtrdma: Remove reply tasklet
xprtrdma: Use workqueue to process RPC/RDMA replies
xprtrdma: Replace send and receive arrays
xprtrdma: Refactor reply handler error handling
...
On NFSv4.1 mount points, the Linux NFS client uses this transport
endpoint to receive backward direction calls and route replies back
to the NFSv4.1 server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Instead of maintaining a fastreg page list, keep an sg table
and convert an array of pages to a sg list. Then call ib_map_mr_sg
and construct ib_reg_wr.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Selvin Xavier <selvin.xavier@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- Create drivers/staging/rdma
- Move amso1100 driver to staging/rdma and schedule for deletion
- Move ipath driver to staging/rdma and schedule for deletion
- Add hfi1 driver to staging/rdma and set TODO for move to regular tree
- Initial support for namespaces to be used on RDMA devices
- Add RoCE GID table handling to the RDMA core caching code
- Infrastructure to support handling of devices with differing
read and write scatter gather capabilities
- Various iSER updates
- Kill off unsafe usage of global mr registrations
- Update SRP driver
- Misc. mlx4 driver updates
- Support for the mr_alloc verb
- Support for a netlink interface between kernel and user space cache
daemon to speed path record queries and route resolution
- Ininitial support for safe hot removal of verbs devices
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=EHLg
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull inifiniband/rdma updates from Doug Ledford:
"This is a fairly sizeable set of changes. I've put them through a
decent amount of testing prior to sending the pull request due to
that.
There are still a few fixups that I know are coming, but I wanted to
go ahead and get the big, sizable chunk into your hands sooner rather
than waiting for those last few fixups.
Of note is the fact that this creates what is intended to be a
temporary area in the drivers/staging tree specifically for some
cleanups and additions that are coming for the RDMA stack. We
deprecated two drivers (ipath and amso1100) and are waiting to hear
back if we can deprecate another one (ehca). We also put Intel's new
hfi1 driver into this area because it needs to be refactored and a
transfer library created out of the factored out code, and then it and
the qib driver and the soft-roce driver should all be modified to use
that library.
I expect drivers/staging/rdma to be around for three or four kernel
releases and then to go away as all of the work is completed and final
deletions of deprecated drivers are done.
Summary of changes for 4.3:
- Create drivers/staging/rdma
- Move amso1100 driver to staging/rdma and schedule for deletion
- Move ipath driver to staging/rdma and schedule for deletion
- Add hfi1 driver to staging/rdma and set TODO for move to regular
tree
- Initial support for namespaces to be used on RDMA devices
- Add RoCE GID table handling to the RDMA core caching code
- Infrastructure to support handling of devices with differing read
and write scatter gather capabilities
- Various iSER updates
- Kill off unsafe usage of global mr registrations
- Update SRP driver
- Misc mlx4 driver updates
- Support for the mr_alloc verb
- Support for a netlink interface between kernel and user space cache
daemon to speed path record queries and route resolution
- Ininitial support for safe hot removal of verbs devices"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits)
IB/ipoib: Suppress warning for send only join failures
IB/ipoib: Clean up send-only multicast joins
IB/srp: Fix possible protection fault
IB/core: Move SM class defines from ib_mad.h to ib_smi.h
IB/core: Remove unnecessary defines from ib_mad.h
IB/hfi1: Add PSM2 user space header to header_install
IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY
mlx5: Fix incorrect wc pkey_index assignment for GSI messages
IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow
IB/uverbs: reject invalid or unknown opcodes
IB/cxgb4: Fix if statement in pick_local_ip6adddrs
IB/sa: Fix rdma netlink message flags
IB/ucma: HW Device hot-removal support
IB/mlx4_ib: Disassociate support
IB/uverbs: Enable device removal when there are active user space applications
IB/uverbs: Explicitly pass ib_dev to uverbs commands
IB/uverbs: Fix race between ib_uverbs_open and remove_one
IB/uverbs: Fix reference counting usage of event files
IB/core: Make ib_dealloc_pd return void
IB/srp: Create an insecure all physical rkey only if needed
...
Both commit 0380a3f375 ("svcrdma: Add a separate "max data segs"
macro for svcrdma") and commit 7e5be28827 ("svcrdma: advertise
the correct max payload") are incorrect. This commit reverts both
changes, restoring the server's maximum payload size to 1MB.
Commit 7e5be28827 based the server's maximum payload on the
_client's_ RPCRDMA_MAX_DATA_SEGS value. That was wrong.
Commit 0380a3f375 tried to fix this so that the client maximum
payload size could be raised without affecting the server, but
managed to confuse matters more on the server side.
More importantly, limiting the advertised maximum payload size was
meant to be a workaround, not the actual fix. We need to revisit
https://bugzilla.linux-nfs.org/show_bug.cgi?id=270
A Linux client on a platform with 64KB pages can overrun and crash
an x86_64 NFS/RDMA server when the r/wsize is 1MB. An x86/64 Linux
client seems to work fine using 1MB reads and writes when the Linux
server's maximum payload size is restored to 1MB.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=270
Fixes: 0380a3f375 ("svcrdma: Add a separate "max data segs" macro")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 0bf4828983 ("svcrdma: refactor marshalling logic") removed
the last call site for svc_rdma_fastreg().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Kernel coding conventions frown upon having large nontrivial
functions in header files, and the preference these days is to
allow the compiler to make inlining decisions if possible.
As these functions are re-homed into a .c file, be sure that
comparisons with fields in struct rpcrdma_msg are with be32
constants.
This is a refactoring change; no behavior change is intended.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The server and client maximum are architecturally independent.
Allow changing one without affecting the other.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
At the 2015 LSF/MM, it was requested that memory allocation
call sites that request GFP_KERNEL allocations in a loop should be
annotated with __GFP_NOFAIL.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fields in struct rpcrdma_msg are __be32. Don't byte-swap these
fields when decoding RPC calls and then swap them back for the
reply. For the most part, they can be left alone.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
svc_rdma_xdr_decode_deferred_req() indexes an array with an
un-byte-swapped value off the wire. Fortunately this function
isn't used anywhere, so simply remove it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull nfsd updates from Bruce Fields:
"The main change is the pNFS block server support from Christoph, which
allows an NFS client connected to shared disk to do block IO to the
shared disk in place of NFS reads and writes. This also requires xfs
patches, which should arrive soon through the xfs tree, barring
unexpected problems. Support for other filesystems is also possible
if there's interest.
Thanks also to Chuck Lever for continuing work to get NFS/RDMA into
shape"
* 'for-3.20' of git://linux-nfs.org/~bfields/linux: (32 commits)
nfsd: default NFSv4.2 to on
nfsd: pNFS block layout driver
exportfs: add methods for block layout exports
nfsd: add trace events
nfsd: update documentation for pNFS support
nfsd: implement pNFS layout recalls
nfsd: implement pNFS operations
nfsd: make find_any_file available outside nfs4state.c
nfsd: make find/get/put file available outside nfs4state.c
nfsd: make lookup/alloc/unhash_stid available outside nfs4state.c
nfsd: add fh_fsid_match helper
nfsd: move nfsd_fh_match to nfsfh.h
fs: add FL_LAYOUT lease type
fs: track fl_owner for leases
nfs: add LAYOUT_TYPE_MAX enum value
nfsd: factor out a helper to decode nfstime4 values
sunrpc/lockd: fix references to the BKL
nfsd: fix year-2038 nfs4 state problem
svcrdma: Handle additional inline content
svcrdma: Move read list XDR round-up logic
...
Clean up: Replace htonl and ntohl with the be32 equivalents.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently the Linux server can not decode RDMA_NOMSG type requests.
Operations whose length exceeds the fixed size of RDMA SEND buffers,
like large NFSv4 CREATE(NF4LNK) operations, must be conveyed via
RDMA_NOMSG.
For an RDMA_MSG type request, the client sends the RPC/RDMA, RPC
headers, and some or all of the NFS arguments via RDMA SEND.
For an RDMA_NOMSG type request, the client sends just the RPC/RDMA
header via RDMA SEND. The request's read list contains elements for
the entire RPC message, including the RPC header.
NFSD expects the RPC/RMDA header and RPC header to be contiguous in
page zero of the XDR buffer. Add logic in the RDMA READ path to make
the read list contents land where the server prefers, when the
incoming message is a type RDMA_NOMSG message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The RDMA reader function doesn't change once an svcxprt_rdma is
instantiated. Instead of checking sc_devcap during every incoming
RPC, set the reader function once when the connection is accepted.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The byte_count argument is not used, and the function is called
only from one place.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The RDMA credit limit controls how many concurrent RPCs are allowed
per connection.
An NFS/RDMA client and server exchange their credit limits in the
RPC/RDMA headers. The Linux client and the Solaris client and server
allow 32 credits. The Linux server allows only 16, which limits its
performance.
Set the server's default credit limit to 32, like the other well-
known implementations, so the out-of-the-shrinkwrap performance of
the Linux server is better.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch refactors the NFSRDMA server marshalling logic to
remove the intermediary map structures. It also fixes an existing bug
where the NFSRDMA server was not minding the device fast register page
list length limitations.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Sparse complains that the definition function definition and the
implementation aren't anotated the same way.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The svcrdma transport was un-marshalling requests in-place. This resulted
in sparse warnings due to __beXX data containing both NBO and HBO data.
The code has been restructured to do byte-swapping as the header is
parsed instead of when the header is validated immediately after receipt.
Also moved extern declarations for the workqueue and memory pools to the
private header file.
Signed-off-by: Tom Tucker <tom@ogc.us>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RPCRDMA requests that specify a read-list are fetched with RDMA_READ. Using
an FRMR to map the data sink improves NFSRDMA security on transports that
place the RDMA_READ data sink LKEY on the wire because the valid lifetime
of the MR is only the duration of the RDMA_READ. The LKEY is invalidated
when the last RDMA_READ WR completes.
Mapping the data sink also allows for very large amounts to data to be
fetched with a single WR, so if the client is also using FRMR, the entire
RPC read-list can be fetched with a single WR.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Fast Reg MR introduces a new WR type. Add a service to register the
region with the adapter and update the completion handling to support
completions with a NULL WR context.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Add services for the allocating, freeing, and unmapping Fast Reg MR. These
services will be used by the transport connection setup, send and receive
routines.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Add data types to track Fast Reg Memory Regions. The core data type is
svc_rdma_fastreg_mr that associates a device MR with a host kva and page
list. A field is added to the WR context to keep track of the FRMR
used to map the local memory for an RPC.
An FRMR list and spin lock are added to the transport instance to keep
track of all FRMR allocated for the transport. Also added are device
capability flags to indicate what the memory registration
capabilities are for the underlying device and whether or not fast
memory registration is supported.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
RDMA_READ completions are kept on a separate queue from the general
I/O request queue. Since a separate lock is used to protect the RDMA_READ
completion queue, a race exists between the dto_tasklet and the
svc_rdma_recvfrom thread where the dto_tasklet sets the XPT_DATA
bit and adds I/O to the read-completion queue. Concurrently, the
recvfrom thread checks the generic queue, finds it empty and resets
the XPT_DATA bit. A subsequent svc_xprt_enqueue will fail to enqueue
the transport for I/O and cause the transport to "stall".
The fix is to protect both lists with the same lock and set the XPT_DATA
bit with this lock held.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Change the WR context pool to be shared across mount points. This
reduces the RDMA transport memory footprint significantly since
idle mounts don't consume WR context memory.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Add a dma map count in order to verify that all DMA mapping resources
have been freed when the transport is closed.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Chuck Lever