Commit Graph

3954 Commits

Author SHA1 Message Date
Linus Torvalds e25b492741 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "A quick batch of bug fixes:

  1) Fix build with IPV6 disabled, from Eric Dumazet.

  2) Several more cases of caching SKB data pointers across calls to
     pskb_may_pull(), thus referencing potentially free'd memory.  From
     Li RongQing.

  3) DSA phy code tests operation presence improperly, instead of going:

        if (x->ops->foo)
                r = x->ops->foo(args);

     it was going:

        if (x->ops->foo(args))
                r = x->ops->foo(args);

   Fix from Andew Lunn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  Net: DSA: Fix checking for get_phy_flags function
  ipv6: fix a potential use after free in sit.c
  ipv6: fix a potential use after free in ip6_offload.c
  ipv4: fix a potential use after free in gre_offload.c
  tcp: fix build error if IPv6 is not enabled
2014-10-19 11:41:57 -07:00
Li RongQing a6d4518da3 ipv6: fix a potential use after free in sit.c
pskb_may_pull() maybe change skb->data and make iph pointer oboslete,
fix it by geting ip header length directly.

Fixes: ca15a078 (sit: generate icmpv6 error when receiving icmpv4 error)
Cc: Oussama Ghorbel <ghorbel@pivasoftware.com>
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-18 13:04:09 -04:00
Li RongQing fc6fb41cd6 ipv6: fix a potential use after free in ip6_offload.c
pskb_may_pull() maybe change skb->data and make opth pointer oboslete,
so set the opth again

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-18 13:04:08 -04:00
Linus Torvalds 2e923b0251 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Include fixes for netrom and dsa (Fabian Frederick and Florian
    Fainelli)

 2) Fix FIXED_PHY support in stmmac, from Giuseppe CAVALLARO.

 3) Several SKB use after free fixes (vxlan, openvswitch, vxlan,
    ip_tunnel, fou), from Li ROngQing.

 4) fec driver PTP support fixes from Luwei Zhou and Nimrod Andy.

 5) Use after free in virtio_net, from Michael S Tsirkin.

 6) Fix flow mask handling for megaflows in openvswitch, from Pravin B
    Shelar.

 7) ISDN gigaset and capi bug fixes from Tilman Schmidt.

 8) Fix route leak in ip_send_unicast_reply(), from Vasily Averin.

 9) Fix two eBPF JIT bugs on x86, from Alexei Starovoitov.

10) TCP_SKB_CB() reorganization caused a few regressions, fixed by Cong
    Wang and Eric Dumazet.

11) Don't overwrite end of SKB when parsing malformed sctp ASCONF
    chunks, from Daniel Borkmann.

12) Don't call sock_kfree_s() with NULL pointers, this function also has
    the side effect of adjusting the socket memory usage.  From Cong Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits)
  bna: fix skb->truesize underestimation
  net: dsa: add includes for ethtool and phy_fixed definitions
  openvswitch: Set flow-key members.
  netrom: use linux/uaccess.h
  dsa: Fix conversion from host device to mii bus
  tipc: fix bug in bundled buffer reception
  ipv6: introduce tcp_v6_iif()
  sfc: add support for skb->xmit_more
  r8152: return -EBUSY for runtime suspend
  ipv4: fix a potential use after free in fou.c
  ipv4: fix a potential use after free in ip_tunnel_core.c
  hyperv: Add handling of IP header with option field in netvsc_set_hash()
  openvswitch: Create right mask with disabled megaflows
  vxlan: fix a free after use
  openvswitch: fix a use after free
  ipv4: dst_entry leak in ip_send_unicast_reply()
  ipv4: clean up cookie_v4_check()
  ipv4: share tcp_v4_save_options() with cookie_v4_check()
  ipv4: call __ip_options_echo() in cookie_v4_check()
  atm: simplify lanai.c by using module_pci_driver
  ...
2014-10-18 09:31:37 -07:00
Eric Dumazet 870c315138 ipv6: introduce tcp_v6_iif()
Commit 971f10eca1 ("tcp: better TCP_SKB_CB layout to reduce cache line
misses") added a regression for SO_BINDTODEVICE on IPv6.

This is because we still use inet6_iif() which expects that IP6 control
block is still at the beginning of skb->cb[]

This patch adds tcp_v6_iif() helper and uses it where necessary.

Because __inet6_lookup_skb() is used by TCP and DCCP, we add an iif
parameter to it.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 971f10eca1 ("tcp: better TCP_SKB_CB layout to reduce cache line misses")
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17 23:48:07 -04:00
Linus Torvalds 0429fbc0bd Merge branch 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu consistent-ops changes from Tejun Heo:
 "Way back, before the current percpu allocator was implemented, static
  and dynamic percpu memory areas were allocated and handled separately
  and had their own accessors.  The distinction has been gone for many
  years now; however, the now duplicate two sets of accessors remained
  with the pointer based ones - this_cpu_*() - evolving various other
  operations over time.  During the process, we also accumulated other
  inconsistent operations.

  This pull request contains Christoph's patches to clean up the
  duplicate accessor situation.  __get_cpu_var() uses are replaced with
  with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().

  Unfortunately, the former sometimes is tricky thanks to C being a bit
  messy with the distinction between lvalues and pointers, which led to
  a rather ugly solution for cpumask_var_t involving the introduction of
  this_cpu_cpumask_var_ptr().

  This converts most of the uses but not all.  Christoph will follow up
  with the remaining conversions in this merge window and hopefully
  remove the obsolete accessors"

* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
  irqchip: Properly fetch the per cpu offset
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
  ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
  Revert "powerpc: Replace __get_cpu_var uses"
  percpu: Remove __this_cpu_ptr
  clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
  sparc: Replace __get_cpu_var uses
  avr32: Replace __get_cpu_var with __this_cpu_write
  blackfin: Replace __get_cpu_var uses
  tile: Use this_cpu_ptr() for hardware counters
  tile: Replace __get_cpu_var uses
  powerpc: Replace __get_cpu_var uses
  alpha: Replace __get_cpu_var
  ia64: Replace __get_cpu_var uses
  s390: cio driver &__get_cpu_var replacements
  s390: Replace __get_cpu_var uses
  mips: Replace __get_cpu_var uses
  MIPS: Replace __get_cpu_var uses in FPU emulator.
  arm: Replace __this_cpu_ptr with raw_cpu_ptr
  ...
2014-10-15 07:48:18 +02:00
Li RongQing 02ea80741a ipv6: remove aca_lock spinlock from struct ifacaddr6
no user uses this lock.

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14 13:15:15 -04:00
Linus Torvalds 35a9ad8af0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Most notable changes in here:

   1) By far the biggest accomplishment, thanks to a large range of
      contributors, is the addition of multi-send for transmit.  This is
      the result of discussions back in Chicago, and the hard work of
      several individuals.

      Now, when the ->ndo_start_xmit() method of a driver sees
      skb->xmit_more as true, it can choose to defer the doorbell
      telling the driver to start processing the new TX queue entires.

      skb->xmit_more means that the generic networking is guaranteed to
      call the driver immediately with another SKB to send.

      There is logic added to the qdisc layer to dequeue multiple
      packets at a time, and the handling mis-predicted offloads in
      software is now done with no locks held.

      Finally, pktgen is extended to have a "burst" parameter that can
      be used to test a multi-send implementation.

      Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4,
      virtio_net

      Adding support is almost trivial, so export more drivers to
      support this optimization soon.

      I want to thank, in no particular or implied order, Jesper
      Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal
      Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann,
      David Tat, Hannes Frederic Sowa, and Rusty Russell.

   2) PTP and timestamping support in bnx2x, from Michal Kalderon.

   3) Allow adjusting the rx_copybreak threshold for a driver via
      ethtool, and add rx_copybreak support to enic driver.  From
      Govindarajulu Varadarajan.

   4) Significant enhancements to the generic PHY layer and the bcm7xxx
      driver in particular (EEE support, auto power down, etc.) from
      Florian Fainelli.

   5) Allow raw buffers to be used for flow dissection, allowing drivers
      to determine the optimal "linear pull" size for devices that DMA
      into pools of pages.  The objective is to get exactly the
      necessary amount of headers into the linear SKB area pre-pulled,
      but no more.  The new interface drivers use is eth_get_headlen().
      From WANG Cong, with driver conversions (several had their own
      by-hand duplicated implementations) by Alexander Duyck and Eric
      Dumazet.

   6) Support checksumming more smoothly and efficiently for
      encapsulations, and add "foo over UDP" facility.  From Tom
      Herbert.

   7) Add Broadcom SF2 switch driver to DSA layer, from Florian
      Fainelli.

   8) eBPF now can load programs via a system call and has an extensive
      testsuite.  Alexei Starovoitov and Daniel Borkmann.

   9) Major overhaul of the packet scheduler to use RCU in several major
      areas such as the classifiers and rate estimators.  From John
      Fastabend.

  10) Add driver for Intel FM10000 Ethernet Switch, from Alexander
      Duyck.

  11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric
      Dumazet.

  12) Add Datacenter TCP congestion control algorithm support, From
      Florian Westphal.

  13) Reorganize sk_buff so that __copy_skb_header() is significantly
      faster.  From Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits)
  netlabel: directly return netlbl_unlabel_genl_init()
  net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers
  net: description of dma_cookie cause make xmldocs warning
  cxgb4: clean up a type issue
  cxgb4: potential shift wrapping bug
  i40e: skb->xmit_more support
  net: fs_enet: Add NAPI TX
  net: fs_enet: Remove non NAPI RX
  r8169:add support for RTL8168EP
  net_sched: copy exts->type in tcf_exts_change()
  wimax: convert printk to pr_foo()
  af_unix: remove 0 assignment on static
  ipv6: Do not warn for informational ICMP messages, regardless of type.
  Update Intel Ethernet Driver maintainers list
  bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING
  tipc: fix bug in multicast congestion handling
  net: better IFF_XMIT_DST_RELEASE support
  net/mlx4_en: remove NETDEV_TX_BUSY
  3c59x: fix bad split of cpu_to_le32(pci_map_single())
  net: bcmgenet: fix Tx ring priority programming
  ...
2014-10-08 21:40:54 -04:00
David S. Miller 64b1f00a08 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2014-10-08 16:22:22 -04:00
Linus Torvalds d0cd84817c dmaengine-3.17
1/ Step down as dmaengine maintainer see commit 08223d80df "dmaengine
    maintainer update"
 
 2/ Removal of net_dma, as it has been marked 'broken' since 3.13 (commit
    7787380336 "net_dma: mark broken"), without reports of performance
    regression.
 
 3/ Miscellaneous fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUKDLKAAoJEB7SkWpmfYgC7wwP/iNHqRjf1suMUTBIF3P6Hgbe
 VCUwh0IkuujMPDG46WRn6cYzarRxVPLoGaLHLPszgjI6pmGPVv19wqeDOlUxtcmr
 0iQWEWv/zqseaAIW+4gj/WYCyMgKil49EUBJKCZCfNmIaad+e0pr8f0uE5yOkHPM
 tqWoZERu9A4dlXGr1TjeOZVzdnPrCt92MrLDN6ZZ6tMuJaEc5PauaLxKTeGy5fYj
 UB+k1xJQzECbsYfpB+uCVYl5/qPO1rNyuBYS8THCsW+JYmrbbfH2kkF2lo2FaUpO
 8Yd50FtzXHKWwAt7BzfIwU2M7x0wRmryrC/xsQi6M+WmVeHYvvHUIpzaA66xRZ5x
 fCy3Fu8sEnmnmboAbh2v2c5uTycqRl2xPzbpLAuxglloXIxzi3ckp6ESF/Z4SldH
 oxIoEievN7lah3vKgvlHZYcWDzrYr8EKf/EzFe9RqDBQDKtzDzre1H9Uivr387Vm
 uFUcGHYG/GXuX47C7EUsMtaSW2UEoR2ytw/HR6CKFPTVXwAzEO6kA9vg0EqL0iIq
 2wVLgavlZuwegmaUBgnr+bgVZMvVN7OU7fAIRVe5xNO6itrPKvheSlQthmRiiq9C
 uzOu4PS6PexqzHUNPCcJpCsj+lawmCSrE0bxtPzTA/CQInVgWs219V9+W5Gn/0YA
 EARN9k6ueX9PZPQrPQLm
 =BBBv
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine

Pull dmaengine updates from Dan Williams:
 "Even though this has fixes marked for -stable, given the size and the
  needed conflict resolutions this is 3.18-rc1/merge-window material.

  These patches have been languishing in my tree for a long while.  The
  fact that I do not have the time to do proper/prompt maintenance of
  this tree is a primary factor in the decision to step down as
  dmaengine maintainer.  That and the fact that the bulk of drivers/dma/
  activity is going through Vinod these days.

  The net_dma removal has not been in -next.  It has developed simple
  conflicts against mainline and net-next (for-3.18).

  Continuing thanks to Vinod for staying on top of drivers/dma/.

  Summary:

   1/ Step down as dmaengine maintainer see commit 08223d80df
      "dmaengine maintainer update"

   2/ Removal of net_dma, as it has been marked 'broken' since 3.13
      (commit 7787380336 "net_dma: mark broken"), without reports of
      performance regression.

   3/ Miscellaneous fixes"

* tag 'dmaengine-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine:
  net: make tcp_cleanup_rbuf private
  net_dma: revert 'copied_early'
  net_dma: simple removal
  dmaengine maintainer update
  dmatest: prevent memory leakage on error path in thread
  ioat: Use time_before_jiffies()
  dmaengine: fix xor sources continuation
  dma: mv_xor: Rename __mv_xor_slot_cleanup() to mv_xor_slot_cleanup()
  dma: mv_xor: Remove all callers of mv_xor_slot_cleanup()
  dma: mv_xor: Remove unneeded mv_xor_clean_completed_slots() call
  ioat: Use pci_enable_msix_exact() instead of pci_enable_msix()
  drivers: dma: Include appropriate header file in dca.c
  drivers: dma: Mark functions as static in dma_v3.c
  dma: mv_xor: Add DMA API error checks
  ioat/dca: Use dev_is_pci() to check whether it is pci device
2014-10-07 20:39:25 -04:00
David S. Miller ea85a0a2dc ipv6: Do not warn for informational ICMP messages, regardless of type.
There is no reason to emit a log message for these.

Based upon a suggestion from Hannes Frederic Sowa.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
2014-10-07 16:33:53 -04:00
Eric Dumazet 0287587884 net: better IFF_XMIT_DST_RELEASE support
Testing xmit_more support with netperf and connected UDP sockets,
I found strange dst refcount false sharing.

Current handling of IFF_XMIT_DST_RELEASE is not optimal.

Dropping dst in validate_xmit_skb() is certainly too late in case
packet was queued by cpu X but dequeued by cpu Y

The logical point to take care of drop/force is in __dev_queue_xmit()
before even taking qdisc lock.

As Julian Anastasov pointed out, need for skb_dst() might come from some
packet schedulers or classifiers.

This patch adds new helper to cleanly express needs of various drivers
or qdiscs/classifiers.

Drivers that need skb_dst() in their ndo_start_xmit() should call
following helper in their setup instead of the prior :

	dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
->
	netif_keep_dst(dev);

Instead of using a single bit, we use two bits, one being
eventually rebuilt in bonding/team drivers.

The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being
rebuilt in bonding/team. Eventually, we could add something
smarter later.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07 13:22:11 -04:00
Hannes Frederic Sowa 327571cb10 ipv6: don't walk node's leaf during serial number update
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07 00:02:30 -04:00
Hannes Frederic Sowa 812918c464 ipv6: make fib6 serial number per namespace
Try to reduce number of possible fn_sernum mutation by constraining them
to their namespace.

Also remove rt_genid which I forgot to remove in 705f1c869d ("ipv6:
remove rt6i_genid").

Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07 00:02:30 -04:00
Hannes Frederic Sowa c8c4d42a6b ipv6: only generate one new serial number per fib mutation
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07 00:02:30 -04:00
Hannes Frederic Sowa 42b1870646 ipv6: make rt_sernum atomic and serial number fields ordinary ints
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07 00:02:30 -04:00
Hannes Frederic Sowa 94b2cfe02b ipv6: minor fib6 cleanups like type safety, bool conversion, inline removal
Also renamed struct fib6_walker_t to fib6_walker and enum fib_walk_state_t
to fib6_walk_state as recommended by Cong Wang.

Cc: Cong Wang <cwang@twopensource.com>
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07 00:02:30 -04:00
David S. Miller 61b37d2f54 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains another batch with Netfilter/IPVS updates
for net-next, they are:

1) Add abstracted ICMP codes to the nf_tables reject expression. We
   introduce four reasons to reject using ICMP that overlap in IPv4
   and IPv6 from the semantic point of view. This should simplify the
   maintainance of dual stack rule-sets through the inet table.

2) Move nf_send_reset() functions from header files to per-family
   nf_reject modules, suggested by Patrick McHardy.

3) We have to use IS_ENABLED(CONFIG_BRIDGE_NETFILTER) everywhere in the
   code now that br_netfilter can be modularized. Convert remaining spots
   in the network stack code.

4) Use rcu_barrier() in the nf_tables module removal path to ensure that
   we don't leave object that are still pending to be released via
   call_rcu (that may likely result in a crash).

5) Remove incomplete arch 32/64 compat from nft_compat. The original (bad)
   idea was to probe the word size based on the xtables match/target info
   size, but this assumption is wrong when you have to dump the information
   back to userspace.

6) Allow to filter from prerouting and postrouting in the nf_tables bridge.
   In order to emulate the ebtables NAT chains (which are actually simple
   filter chains with no special semantics), we have support filtering from
   this hooks too.

7) Add explicit module dependency between xt_physdev and br_netfilter.
   This provides a way to detect if the user needs br_netfilter from
   the configuration path. This should reduce the breakage of the
   br_netfilter modularization.

8) Cleanup coding style in ip_vs.h, from Simon Horman.

9) Fix crash in the recently added nf_tables masq expression. We have
   to register/unregister the notifiers to clean up the conntrack table
   entries from the module init/exit path, not from the rule addition /
   deletion path. From Arturo Borrero.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 21:32:37 -04:00
Nicolas Dichtel 3be07244b7 ip6_gre: fix flowi6_proto value in xmit path
In xmit path, we build a flowi6 which will be used for the output route lookup.
We are sending a GRE packet, neither IPv4 nor IPv6 encapsulated packet, thus the
protocol should be IPPROTO_GRE.

Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Reported-by: Matthieu Ternisien d'Ouville <matthieu.tdo@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-04 20:08:24 -04:00
Tom Herbert efc98d08e1 fou: eliminate IPv4,v6 specific GRO functions
This patch removes fou[46]_gro_receive and fou[46]_gro_complete
functions. The v4 or v6 variants were chosen for the UDP offloads
based on the address family of the socket this is not necessary
or correct. Alternatively, this patch adds is_ipv6 to napi_gro_skb.
This is set in udp6_gro_receive and unset in udp4_gro_receive. In
fou_gro_receive the value is used to select the correct inet_offloads
for the protocol of the outer IP header.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03 16:53:32 -07:00
Arturo Borrero 8da4cc1b10 netfilter: nft_masq: register/unregister notifiers on module init/exit
We have to register the notifiers in the masquerade expression from
the the module _init and _exit path.

This fixes crashes when removing the masquerade rule with no
ipt_MASQUERADE support in place (which was masking the problem).

Fixes: 9ba1f72 ("netfilter: nf_tables: add new nft_masq expression")
Signed-off-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-10-03 14:24:35 +02:00
David S. Miller 739e4a758e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/usb/r8152.c
	net/netfilter/nfnetlink.c

Both r8152 and nfnetlink conflicts were simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-02 11:25:43 -07:00
Pablo Neira Ayuso 1109a90c01 netfilter: use IS_ENABLED(CONFIG_BRIDGE_NETFILTER)
In 34666d4 ("netfilter: bridge: move br_netfilter out of the core"),
the bridge netfilter code has been modularized.

Use IS_ENABLED instead of ifdef to cover the module case.

Fixes: 34666d4 ("netfilter: bridge: move br_netfilter out of the core")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-10-02 18:30:54 +02:00
Pablo Neira Ayuso c8d7b98bec netfilter: move nf_send_resetX() code to nf_reject_ipvX modules
Move nf_send_reset() and nf_send_reset6() to nf_reject_ipv4 and
nf_reject_ipv6 respectively. This code is shared by x_tables and
nf_tables.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-10-02 18:30:49 +02:00
Tom Herbert 54bc9bac30 gre: Set inner protocol in v4 and v6 GRE transmit
Call skb_set_inner_protocol to set inner Ethernet protocol to
protocol being encapsulation by GRE before tunnel_xmit. This is
needed for GSO if UDP encapsulation (fou) is being done.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01 21:35:51 -04:00
Tom Herbert 469471cdfc sit: Set inner IP protocol in sit
Call skb_set_inner_ipproto to set inner IP protocol to IPPROTO_IPV6
before tunnel_xmit. This is needed if UDP encapsulation (fou) is
being done.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01 21:35:51 -04:00
Tom Herbert 8bce6d7d0d udp: Generalize skb_udp_segment
skb_udp_segment is the function called from udp4_ufo_fragment to
segment a UDP tunnel packet. This function currently assumes
segmentation is transparent Ethernet bridging (i.e. VXLAN
encapsulation). This patch generalizes the function to
operate on either Ethertype or IP protocol.

The inner_protocol field must be set to the protocol of the inner
header. This can now be either an Ethertype or an IP protocol
(in a union). A new flag in the skbuff indicates which type is
effective. skb_set_inner_protocol and skb_set_inner_ipproto
helper functions were added to set the inner_protocol. These
functions are called from the point where the tunnel encapsulation
is occuring.

When skb_udp_tunnel_segment is called, the function to segment the
inner packet is selected based on the inner IP or Ethertype. In the
case of an IP protocol encapsulation, the function is derived from
inet[6]_offloads. In the case of Ethertype, skb->protocol is
set to the inner_protocol and skb_mac_gso_segment is called. (GRE
currently does this, but it might be possible to lookup the protocol
in offload_base and call the appropriate segmenation function
directly).

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01 21:35:51 -04:00
Hannes Frederic Sowa 705f1c869d ipv6: remove rt6i_genid
Eric Dumazet noticed that all no-nonexthop or no-gateway routes which
are already marked DST_HOST (e.g. input routes routes) will always be
invalidated during sk_dst_check. Thus per-socket dst caching absolutely
had no effect and early demuxing had no effect.

Thus this patch removes rt6i_genid: fn_sernum already gets modified during
add operations, so we only must ensure we mutate fn_sernum during ipv6
address remove operations. This is a fairly cost extensive operations,
but address removal should not happen that often. Also our mtu update
functions do the same and we heard no complains so far. xfrm policy
changes also cause a call into fib6_flush_trees. Also plug a hole in
rt6_info (no cacheline changes).

I verified via tracing that this change has effect.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 14:00:48 -04:00
David S. Miller 852248449c Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
pull request: netfilter/ipvs updates for net-next

The following patchset contains Netfilter/IPVS updates for net-next,
most relevantly they are:

1) Four patches to make the new nf_tables masquerading support
   independent of the x_tables infrastructure. This also resolves a
   compilation breakage if the masquerade target is disabled but the
   nf_tables masq expression is enabled.

2) ipset updates via Jozsef Kadlecsik. This includes the addition of the
   skbinfo extension that allows you to store packet metainformation in the
   elements. This can be used to fetch and restore this to the packets through
   the iptables SET target, patches from Anton Danilov.

3) Add the hash:mac set type to ipset, from Jozsef Kadlecsick.

4) Add simple weighted fail-over scheduler via Simon Horman. This provides
   a fail-over IPVS scheduler (unlike existing load balancing schedulers).
   Connections are directed to the appropriate server based solely on
   highest weight value and server availability, patch from Kenny Mathis.

5) Support IPv6 real servers in IPv4 virtual-services and vice versa.
   Simon Horman informs that the motivation for this is to allow more
   flexibility in the choice of IP version offered by both virtual-servers
   and real-servers as they no longer need to match: An IPv4 connection
   from an end-user may be forwarded to a real-server using IPv6 and
   vice versa. No ip_vs_sync support yet though. Patches from Alex Gartrell
   and Julian Anastasov.

6) Add global generation ID to the nf_tables ruleset. When dumping from
   several different object lists, we need a way to identify that an update
   has ocurred so userspace knows that it needs to refresh its lists. This
   also includes a new command to obtain the 32-bits generation ID. The
   less significant 16-bits of this ID is also exposed through res_id field
   in the nfnetlink header to quickly detect the interference and retry when
   there is no risk of ID wraparound.

7) Move br_netfilter out of the bridge core. The br_netfilter code is
   built in the bridge core by default. This causes problems of different
   kind to people that don't want this: Jesper reported performance drop due
   to the inconditional hook registration and I remember to have read complains
   on netdev from people regarding the unexpected behaviour of our bridging
   stack when br_netfilter is enabled (fragmentation handling, layer 3 and
   upper inspection). People that still need this should easily undo the
   damage by modprobing the new br_netfilter module.

8) Dump the set policy nf_tables that allows set parameterization. So
   userspace can keep user-defined preferences when saving the ruleset.
   From Arturo Borrero.

9) Use __seq_open_private() helper function to reduce boiler plate code
   in x_tables, From Rob Jones.

10) Safer default behaviour in case that you forget to load the protocol
   tracker. Daniel Borkmann and Florian Westphal detected that if your
   ruleset is stateful, you allow traffic to at least one single SCTP port
   and the SCTP protocol tracker is not loaded, then any SCTP traffic may
   be pass through unfiltered. After this patch, the connection tracking
   classifies SCTP/DCCP/UDPlite/GRE packets as invalid if your kernel has
   been compiled with support for these modules.
====================

Trivially resolved conflict in include/linux/skbuff.h, Eric moved some
netfilter skbuff members around, and the netfilter tree adjusted the
ifdef guards for the bridging info pointer.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29 14:46:53 -04:00
David S. Miller f5c7e1a47a Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2014-09-25

1) Remove useless hash_resize_mutex in xfrm_hash_resize().
   This mutex is used only there, but xfrm_hash_resize()
   can't be called concurrently at all. From Ying Xue.

2) Extend policy hashing to prefixed policies based on
   prefix lenght thresholds. From Christophe Gouault.

3) Make the policy hash table thresholds configurable
   via netlink. From Christophe Gouault.

4) Remove the maximum authentication length for AH.
   This was needed to limit stack usage. We switched
   already to allocate space, so no need to keep the
   limit. From Herbert Xu.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28 17:19:15 -04:00
Eric Dumazet 971f10eca1 tcp: better TCP_SKB_CB layout to reduce cache line misses
TCP maintains lists of skb in write queue, and in receive queues
(in order and out of order queues)

Scanning these lists both in input and output path usually requires
access to skb->next, TCP_SKB_CB(skb)->seq, and TCP_SKB_CB(skb)->end_seq

These fields are currently in two different cache lines, meaning we
waste lot of memory bandwidth when these queues are big and flows
have either packet drops or packet reorders.

We can move TCP_SKB_CB(skb)->header at the end of TCP_SKB_CB, because
this header is not used in fast path. This allows TCP to search much faster
in the skb lists.

Even with regular flows, we save one cache line miss in fast path.

Thanks to Christoph Paasch for noticing we need to cleanup
skb->cb[] (IPCB/IP6CB) before entering IP stack in tx path,
and that I forgot IPCB use in tcp_v4_hnd_req() and tcp_v4_save_options().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28 16:35:43 -04:00
Eric Dumazet a224772db8 ipv6: add a struct inet6_skb_parm param to ipv6_opt_accepted()
ipv6_opt_accepted() assumes IP6CB(skb) holds the struct inet6_skb_parm
that it needs. Lets not assume this, as TCP stack might use a different
place.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28 16:35:43 -04:00
Steffen Klassert cd0a0bd9b8 ip6_gre: Return an error when adding an existing tunnel.
ip6gre_tunnel_locate() should not return an existing tunnel if
create is true. Otherwise it is possible to add the same
tunnel multiple times without getting an error.

So return NULL if the tunnel that should be created already
exists.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28 16:19:46 -04:00
Steffen Klassert d814b847be ip6_vti: Return an error when adding an existing tunnel.
vti6_locate() should not return an existing tunnel if
create is true. Otherwise it is possible to add the same
tunnel multiple times without getting an error.

So return NULL if the tunnel that should be created already
exists.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28 16:19:46 -04:00
Steffen Klassert 2b0bb01b6e ip6_tunnel: Return an error when adding an existing tunnel.
ip6_tnl_locate() should not return an existing tunnel if
create is true. Otherwise it is possible to add the same
tunnel multiple times without getting an error.

So return NULL if the tunnel that should be created already
exists.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28 16:19:46 -04:00
Dan Williams 7bced39751 net_dma: simple removal
Per commit "77873803363c net_dma: mark broken" net_dma is no longer used
and there is no plan to fix it.

This is the mechanical removal of bits in CONFIG_NET_DMA ifdef guards.
Reverting the remainder of the net_dma induced changes is deferred to
subsequent patches.

Marked for stable due to Roman's report of a memory leak in
dma_pin_iovec_pages():

    https://lkml.org/lkml/2014/9/3/177

Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: David Whipple <whipple@securedatainnovations.ch>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: <stable@vger.kernel.org>
Reported-by: Roman Gushchin <klamm@yandex-team.ru>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2014-09-28 07:05:16 -07:00
Nicolas Dichtel 5a4ee9a9a0 ip6gre: add a rtnl link alias for ip6gretap
With this alias, we don't need to load manually the module before adding an
ip6gretap interface with iproute2.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 17:15:57 -04:00
Tom Herbert 53e5039896 net: Remove gso_send_check as an offload callback
The send_check logic was only interesting in cases of TCP offload and
UDP UFO where the checksum needed to be initialized to the pseudo
header checksum. Now we've moved that logic into the related
gso_segment functions so gso_send_check is no longer needed.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 00:22:47 -04:00
Tom Herbert f71470b37e udp: move logic out of udp[46]_ufo_send_check
In udp[46]_ufo_send_check the UDP checksum initialized to the pseudo
header checksum. We can move this logic into udp[46]_ufo_fragment.
After this change udp[64]_ufo_send_check is a no-op.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 00:22:46 -04:00
Tom Herbert d020f8f733 tcp: move logic out of tcp_v[64]_gso_send_check
In tcp_v[46]_gso_send_check the TCP checksum is initialized to the
pseudo header checksum using __tcp_v[46]_send_check. We can move this
logic into new tcp[46]_gso_segment functions to be done when
ip_summed != CHECKSUM_PARTIAL (ip_summed == CHECKSUM_PARTIAL should be
the common case, possibly always true when taking GSO path). After this
change tcp_v[46]_gso_send_check is no-op.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 00:22:46 -04:00
Eric Dumazet 4cdf507d54 icmp: add a global rate limitation
Current ICMP rate limiting uses inetpeer cache, which is an RBL tree
protected by a lock, meaning that hosts can be stuck hard if all cpus
want to check ICMP limits.

When say a DNS or NTP server process is restarted, inetpeer tree grows
quick and machine comes to its knees.

iptables can not help because the bottleneck happens before ICMP
messages are even cooked and sent.

This patch adds a new global limitation, using a token bucket filter,
controlled by two new sysctl :

icmp_msgs_per_sec - INTEGER
    Limit maximal number of ICMP packets sent per second from this host.
    Only messages whose type matches icmp_ratemask are
    controlled by this limit.
    Default: 1000

icmp_msgs_burst - INTEGER
    icmp_msgs_per_sec controls number of ICMP packets sent per second,
    while icmp_msgs_burst controls the burst size of these packets.
    Default: 50

Note that if we really want to send millions of ICMP messages per
second, we might extend idea and infra added in commit 04ca6973f7
("ip: make IP identifiers less predictable") :
add a token bucket in the ip_idents hash and no longer rely on inetpeer.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-23 12:47:38 -04:00
David S. Miller 1f6d80358d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	arch/mips/net/bpf_jit.c
	drivers/net/can/flexcan.c

Both the flexcan and MIPS bpf_jit conflicts were cases of simple
overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-23 12:09:27 -04:00
Daniel Borkmann 35f7aa5309 ipv6: mld: answer mldv2 queries with mldv1 reports in mldv1 fallback
RFC2710 (MLDv1), section 3.7. says:

  The length of a received MLD message is computed by taking the
  IPv6 Payload Length value and subtracting the length of any IPv6
  extension headers present between the IPv6 header and the MLD
  message. If that length is greater than 24 octets, that indicates
  that there are other fields present *beyond* the fields described
  above, perhaps belonging to a *future backwards-compatible* version
  of MLD. An implementation of the version of MLD specified in this
  document *MUST NOT* send an MLD message longer than 24 octets and
  MUST ignore anything past the first 24 octets of a received MLD
  message.

RFC3810 (MLDv2), section 8.2.1. states for *listeners* regarding
presence of MLDv1 routers:

  In order to be compatible with MLDv1 routers, MLDv2 hosts MUST
  operate in version 1 compatibility mode. [...] When Host
  Compatibility Mode is MLDv2, a host acts using the MLDv2 protocol
  on that interface. When Host Compatibility Mode is MLDv1, a host
  acts in MLDv1 compatibility mode, using *only* the MLDv1 protocol,
  on that interface. [...]

While section 8.3.1. specifies *router* behaviour regarding presence
of MLDv1 routers:

  MLDv2 routers may be placed on a network where there is at least
  one MLDv1 router. The following requirements apply:

  If an MLDv1 router is present on the link, the Querier MUST use
  the *lowest* version of MLD present on the network. This must be
  administratively assured. Routers that desire to be compatible
  with MLDv1 MUST have a configuration option to act in MLDv1 mode;
  if an MLDv1 router is present on the link, the system administrator
  must explicitly configure all MLDv2 routers to act in MLDv1 mode.
  When in MLDv1 mode, the Querier MUST send periodic General Queries
  truncated at the Multicast Address field (i.e., 24 bytes long),
  and SHOULD also warn about receiving an MLDv2 Query (such warnings
  must be rate-limited). The Querier MUST also fill in the Maximum
  Response Delay in the Maximum Response Code field, i.e., the
  exponential algorithm described in section 5.1.3. is not used. [...]

That means that we should not get queries from different versions of
MLD. When there's a MLDv1 router present, MLDv2 enforces truncation
and MRC == MRD (both fields are overlapping within the 24 octet range).

Section 8.3.2. specifies behaviour in the presence of MLDv1 multicast
address *listeners*:

  MLDv2 routers may be placed on a network where there are hosts
  that have not yet been upgraded to MLDv2. In order to be compatible
  with MLDv1 hosts, MLDv2 routers MUST operate in version 1 compatibility
  mode. MLDv2 routers keep a compatibility mode per multicast address
  record. The compatibility mode of a multicast address is determined
  from the Multicast Address Compatibility Mode variable, which can be
  in one of the two following states: MLDv1 or MLDv2.

  The Multicast Address Compatibility Mode of a multicast address
  record is set to MLDv1 whenever an MLDv1 Multicast Listener Report is
  *received* for that multicast address. At the same time, the Older
  Version Host Present timer for the multicast address is set to Older
  Version Host Present Timeout seconds. The timer is re-set whenever a
  new MLDv1 Report is received for that multicast address. If the Older
  Version Host Present timer expires, the router switches back to
  Multicast Address Compatibility Mode of MLDv2 for that multicast
  address. [...]

That means, what can happen is the following scenario, that hosts can
act in MLDv1 compatibility mode when they previously have received an
MLDv1 query (or, simply operate in MLDv1 mode-only); and at the same
time, an MLDv2 router could start up and transmits MLDv2 startup query
messages while being unaware of the current operational mode.

Given RFC2710, section 3.7 we would need to answer to that with an MLDv1
listener report, so that the router according to RFC3810, section 8.3.2.
would receive that and internally switch to MLDv1 compatibility as well.

Right now, I believe since the initial implementation of MLDv2, Linux
hosts would just silently drop such MLDv2 queries instead of replying
with an MLDv1 listener report, which would prevent a MLDv2 router going
into fallback mode (until it receives other MLDv1 queries).

Since the mapping of MRC to MRD in exactly such cases can make use of
the exponential algorithm from 5.1.3, we cannot [strictly speaking] be
aware in MLDv1 of the encoding in MRC, it seems also not mentioned by
the RFC. Since encodings are the same up to 32767, assume in such a
situation this value as a hard upper limit we would clamp. We have asked
one of the RFC authors on that regard, and he mentioned that there seem
not to be any implementations that make use of that exponential algorithm
on startup messages. In any case, this patch fixes this MLD
interoperability issue.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22 16:23:15 -04:00
Tom Herbert 3fcb95a84f udp: Need to make ip6_udp_tunnel.c have GPL license
Unable to load various tunneling modules without this:

[   80.679049] fou: Unknown symbol udp_sock_create6 (err 0)
[   91.439939] ip6_udp_tunnel: Unknown symbol ip6_local_out (err 0)
[   91.439954] ip6_udp_tunnel: Unknown symbol __put_net (err 0)
[   91.457792] vxlan: Unknown symbol udp_sock_create6 (err 0)
[   91.457831] vxlan: Unknown symbol udp_tunnel6_xmit_skb (err 0)

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22 15:08:25 -04:00
Andy Zhou 6d967f8789 udp_tunnel: Only build ip6_udp_tunnel.c when IPV6 is selected
Functions supplied in ip6_udp_tunnel.c are only needed when IPV6 is
selected. When IPV6 is not selected, those functions are stubbed out
in udp_tunnel.h.

==================================================================
 net/ipv6/ip6_udp_tunnel.c:15:5: error: redefinition of 'udp_sock_create6'
     int udp_sock_create6(struct net *net, struct udp_port_cfg *cfg,
 In file included from net/ipv6/ip6_udp_tunnel.c:9:0:
      include/net/udp_tunnel.h:36:19: note: previous definition of 'udp_sock_create6' was here
       static inline int udp_sock_create6(struct net *net, struct udp_port_cfg *cfg,
==================================================================

Fixes:  fd384412e udp_tunnel: Seperate ipv6 functions into its own file
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 22:05:28 -04:00
Tom Herbert 14909664e4 sit: Setup and TX path for sit/UDP foo-over-udp encapsulation
Added netlink handling of IP tunnel encapulation paramters, properly
adjust MTU for encapsulation. Added ip_tunnel_encap call to
ipip6_tunnel_xmit to actually perform FOU encapsulation.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 17:15:32 -04:00
Tom Herbert ce3e02867e net: Export inet_offloads and inet6_offloads
Want to be able to use these in foo-over-udp offloads, etc.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 17:15:31 -04:00
Andy Zhou 6a93cc9052 udp-tunnel: Add a few more UDP tunnel APIs
Added a few more UDP tunnel APIs that can be shared by UDP based
tunnel protocol implementation. The main ones are highlighted below.

setup_udp_tunnel_sock() configures UDP listener socket for
receiving UDP encapsulated packets.

udp_tunnel_xmit_skb() and upd_tunnel6_xmit_skb() transmit skb
using UDP encapsulation.

udp_tunnel_sock_release() closes the UDP tunnel listener socket.

Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 15:57:15 -04:00
Andy Zhou fd384412e1 udp_tunnel: Seperate ipv6 functions into its own file.
Add ip6_udp_tunnel.c for ipv6 UDP tunnel functions to avoid ifdefs
in udp_tunnel.c

Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 15:57:15 -04:00
Herbert Xu 689f1c9de2 ipsec: Remove obsolete MAX_AH_AUTH_LEN
While tracking down the MAX_AH_AUTH_LEN crash in an old kernel
I thought that this limit was rather arbitrary and we should
just get rid of it.

In fact it seems that we've already done all the work needed
to remove it apart from actually removing it.  This limit was
there in order to limit stack usage.  Since we've already
switched over to allocating scratch space using kmalloc, there
is no longer any need to limit the authentication length.

This patch kills all references to it, including the BUG_ONs
that led me here.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-09-18 10:54:36 +02:00