Commit Graph

29 Commits

Author SHA1 Message Date
Daniel Glöckner 0b3eb21b2f xtensa: support s6000 gpio irqs and alternate function selection
Implement an irq chip to handle interrupts via gpio.  The GPIO chip
initialization function now takes a bitmask denoting pins that should
be configured for their alternate function.

changes compared to v1:
- fixed bug on edge interrupt configuration
- accommodated to function name change
- moved definition of VARIANT_NR_IRQS to this patch
- renamed __XTENSA_S6000_IRQ_H to _XTENSA_S6000_IRQ_H as requested

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-06-22 02:37:26 -07:00
Daniel Glöckner 1beee21030 xtensa: allow variant to initialize own irq chips
There was already a PLATFORM_NR_IRQS define, which is now accompanied
by a VARIANT_NR_IRQS. To be able to initialize these interrupts,
init_IRQ now calls a variant specific hook.

Changes compared to v1:
- adapted to new CONFIG_VARIANT_IRQ_EXT
- removed definition and call of platform_init_IRQ as there already
  is a platform_init_irq defined in asm/platform.h with a weak default
  in kernel/platform.c
- renamed variant_init_IRQ to variant_init_irq

Note that I could not find the call site of platform_init_irq although
it is stated in platform.h that it is called from init_IRQ.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-06-22 02:36:59 -07:00
Oskar Schirmer bd974240c9 xtensa: cache inquiry and unaligned cache handling functions
The existing xtensa cache handling functions work on page-aligned
memory regions.

These functions are needed for the s6000 dma engine which can work on
a byte-granularity.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Cc: Johannes Weiner <jw@emlix.com>
Cc: Daniel Glockner <dg@emlix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-06-22 02:36:50 -07:00
Randy Dunlap e4c9dd0fba kmap_types: make most arches use generic header file
Convert most arches to use asm-generic/kmap_types.h.

Move the KM_FENCE_ macro additions into asm-generic/kmap_types.h,
controlled by __WITH_KM_FENCE from each arch's kmap_types.h file.

Would be nice to be able to add custom KM_types per arch, but I don't yet
see a nice, clean way to do that.

Built on x86_64, i386, mips, sparc, alpha(tonyb), powerpc(tonyb), and
68k(tonyb).

Note: avr32 should be able to remove KM_PTE2 (since it's not used) and
then just use the generic kmap_types.h file.  Get avr32 maintainer
approval.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: "Luck Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:51 -07:00
Arnd Bergmann 5b17e1cd89 asm-generic: rename page.h and uaccess.h
The current asm-generic/page.h only contains the get_order
function, and asm-generic/uaccess.h only implements
unaligned accesses. This renames the file to getorder.h
and uaccess-unaligned.h to make room for new page.h
and uaccess.h file that will be usable by all simple
(e.g. nommu) architectures.

Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2009-06-11 21:02:17 +02:00
Arnd Bergmann 72099ed271 asm-generic: rename atomic.h to atomic-long.h
The existing asm-generic/atomic.h only defines the
atomic_long type. This renames it to atomic-long.h
so we have a place to add a truly generic atomic.h
that can be used on all non-SMP systems.

Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 21:02:17 +02:00
Arnd Bergmann c31ae4bb4a asm-generic: introduce asm/bitsperlong.h
This provides a reliable way for asm-generic/types.h and other
files to find out if it is running on a 32 or 64 bit platform.

We cannot use CONFIG_64BIT for this in headers that are included
from user space because CONFIG symbols are not available there.
We also cannot do it inside of asm/types.h because some headers
need the word size but cannot include types.h.

The solution is to introduce a new header <asm/bitsperlong.h>
that defines both __BITS_PER_LONG for user space and
BITS_PER_LONG for usage in the kernel. The asm-generic
version falls back to 32 bit unless the architecture overrides
it, which I did for all 64 bit platforms.

Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2009-06-11 21:02:14 +02:00
Oskar Schirmer d15f05eb8c xtensa: fix wrong extern declaration renamed in code using it
The variable ccount_nsec has been renamed to nsec_per_ccount
in arch/xtensa/kernel/time.c in 2b8aea74 (2007-08-05),
but the fix failed to rename the variable in
arch/xtensa/include/asm/timex.h as well.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11 22:00:11 -07:00
Chris Zankel 7dbe5c5424 xtensa: Fix checksum header file
We need to add a "memory" dependency (barrier) in assembly macros
that access (read or write) memory. Otherwise, the compiler might
ill-optimize the order of memory accesses.

Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11 21:48:23 -07:00
Linus Torvalds 714f83d5d9 Merge branch 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits)
  tracing, net: fix net tree and tracing tree merge interaction
  tracing, powerpc: fix powerpc tree and tracing tree interaction
  ring-buffer: do not remove reader page from list on ring buffer free
  function-graph: allow unregistering twice
  trace: make argument 'mem' of trace_seq_putmem() const
  tracing: add missing 'extern' keywords to trace_output.h
  tracing: provide trace_seq_reserve()
  blktrace: print out BLK_TN_MESSAGE properly
  blktrace: extract duplidate code
  blktrace: fix memory leak when freeing struct blk_io_trace
  blktrace: fix blk_probes_ref chaos
  blktrace: make classic output more classic
  blktrace: fix off-by-one bug
  blktrace: fix the original blktrace
  blktrace: fix a race when creating blk_tree_root in debugfs
  blktrace: fix timestamp in binary output
  tracing, Text Edit Lock: cleanup
  tracing: filter fix for TRACE_EVENT_FORMAT events
  ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release()
  x86: kretprobe-booster interrupt emulation code fix
  ...

Fix up trivial conflicts in
 arch/parisc/include/asm/ftrace.h
 include/linux/memory.h
 kernel/extable.c
 kernel/module.c
2009-04-05 11:04:19 -07:00
Johannes Weiner 4476c96769 xtensa: remove platform rtc hooks
platform_get/set_rtc_time() is not implemented by any of the supported
xtensa platforms.  Remove the facility completely.

The initial seconds for xtime come from read_persistent_clock() which
returns just 0 in the generic implementation.  Platforms that sport a
persistent clock can implement this function.

This is needed to implement the ccount as a clock source.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02 23:45:07 -07:00
Johannes Weiner 000af2c5a8 xtensa: s6000 variant
Support for the Stretch S6000 Xtensa core variant.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02 23:43:36 -07:00
Johannes Weiner 4c0d214144 xtensa: variant irq set callbacks
Allow the core variant code to provide irq enable/disable callbacks.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02 23:43:01 -07:00
Johannes Weiner e5083a63b6 xtensa: nommu support
Add support for !CONFIG_MMU setups.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02 23:41:50 -07:00
Oskar Schirmer 7789f89af9 xtensa: add flat support
Add the arch-specific header for flat support on xtensa in preparation
for the Xtensa S6000 nommu port.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02 23:41:29 -07:00
Oskar Schirmer a81cbd2da4 xtensa: enforce slab alignment to maximum register width
XCHAL_DATA_WIDTH is the maximum register width, slab caches should be
aligned to this.

Theoretical fix as all variants have had an XCHAL_DATA_WIDTH of 4
(wordsize) for now.  But the S6000 variant will raise this to 16.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02 23:41:16 -07:00
Johannes Weiner c947a585ab xtensa: cope with ram beginning at higher addresses
The current assumption of the memory code is that the first RAM PFN in
the system is 0.

Adjust the relevant code to play well with setups where memory starts
at higher addresses, indicated by PLATFORM_DEFAULT_MEM_START.

The new memory model looks like this:

+----------+--+----------------------+----------------+
|          |  |                      |                |
|          |  |         RAM          |                |
|          |  |                      |                |
+----------+--+----------------------+----------------+
|          |  |                      |                |
+- PFN 0   |  +- min_low_pfn         +- max_low_pfn   +- max_pfn
           |
           +- ARCH_PFN_OFFSET
           +- PLATFORM_DEFAULT_MEM_START >> PAGE_SIZE

The memory map contains pages starting from pfn ARCH_PFN_OFFSET up to
max_low_pfn.  The only zone used right now will span exactly the same
region.

Usually, ARCH_PFN_OFFSET and min_low_pfn are the same value.  Handle
them separately for robustness.  Gapping pages will be in the memory
map but marked as reserved and won't be touched.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02 23:41:08 -07:00
Johannes Weiner 4f682fbb27 xtensa: remove redefinition of XCHAL_MMU_ASID_BITS
This constant is defined in all core headers.  Remove the redundant
definition which might error out if other includes lead to inclusion
of <variant/core.h>.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-04-02 23:38:10 -07:00
Ingo Molnar 8302294f43 Merge branch 'tracing/core-v2' into tracing-for-linus
Conflicts:
	include/linux/slub_def.h
	lib/Kconfig.debug
	mm/slob.c
	mm/slub.c
2009-04-02 00:49:02 +02:00
Linus Torvalds ba1eb95cf3 Merge branch 'header-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'header-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
  x86: headers cleanup - setup.h
  emu101k1.h: fix duplicate include of <linux/types.h>
  compiler-gcc4: conditionalize #error on __KERNEL__
  remove __KERNEL_STRICT_NAMES
  make netfilter use strict integer types
  make drm headers use strict integer types
  make MTD headers use strict integer types
  make most exported headers use strict integer types
  make exported headers use strict posix types
  unconditionally include asm/types.h from linux/types.h
  make linux/types.h as assembly safe
  Neither asm/types.h nor linux/types.h is required for arch/ia64/include/asm/fpu.h
  headers_check fix cleanup: linux/reiserfs_fs.h
  headers_check fix cleanup: linux/nubus.h
  headers_check fix cleanup: linux/coda_psdev.h
  headers_check fix: x86, setup.h
  headers_check fix: x86, prctl.h
  headers_check fix: linux/reinserfs_fs.h
  headers_check fix: linux/socket.h
  headers_check fix: linux/nubus.h
  ...

Manually fix trivial conflicts in:
	include/linux/netfilter/xt_limit.h
	include/linux/netfilter/xt_statistic.h
2009-03-26 16:11:41 -07:00
Ingo Molnar f0ef039851 Merge branch 'x86/core' into tracing/textedit
Conflicts:
	arch/x86/Kconfig
	block/blktrace.c
	kernel/irq/handle.c

Semantic conflict:
	kernel/trace/blktrace.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06 16:45:01 +01:00
Uwe Kleine-Koenig c79a61f557 tracing: make CALLER_ADDRx overwriteable
The current definition of CALLER_ADDRx isn't suitable for all platforms.
E.g. for ARM __builtin_return_address(N) doesn't work for N > 0 and
AFAIK for powerpc there are no frame pointers needed to have a working
__builtin_return_address.  This patch allows defining the CALLER_ADDRx
macros in <asm/ftrace.h> and let these take precedence.

Because now <asm/ftrace.h> is included unconditionally in
<linux/ftrace.h> all archs that don't already had this include get an
empty one for free.

Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-02 16:49:37 -05:00
Patrick Ohly cb9eff0978 net: new user space API for time stamping of incoming and outgoing packets
User space can request hardware and/or software time stamping.
Reporting of the result(s) via a new control message is enabled
separately for each field in the message because some of the
fields may require additional computation and thus cause overhead.
User space can tell the different kinds of time stamps apart
and choose what suits its needs.

When a TX timestamp operation is requested, the TX skb will be cloned
and the clone will be time stamped (in hardware or software) and added
to the socket error queue of the skb, if the skb has a socket
associated with it.

The actual TX timestamp will reach userspace as a RX timestamp on the
cloned packet. If timestamping is requested and no timestamping is
done in the device driver (potentially this may use hardware
timestamping), it will be done in software after the device's
start_hard_xmit routine.

Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 22:43:33 -08:00
Jaswinder Singh Rajput 1ff8f739c7 headers_check fix: xtensa, swab.h
fix the following 'make headers_check' warnings:

  usr/include/asm-xtensa/swab.h:14: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm-xtensa/swab.h:19: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-02-01 11:01:30 +05:30
Harvey Harrison 74d96f0186 byteorder: make swab.h include asm/swab.h like a regular header
Add swab.h to kbuild.asm and remove the individual entries from
each arch, mark as unifdef as some arches have some kernel-only
bits inside.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-14 19:56:50 -08:00
Harvey Harrison 8903709b05 xtensa: introduce swab.h
Fixes compile breakage as linux/byteorder.h was removed.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 12:22:04 -08:00
Linus Torvalds 52fefcec97 Merge git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6:
  xtensa: Update platform files to reflect new location of the header files.
  xtensa: switch to packed struct unaligned access implementation
  xtensa: Add xt2000 support files.
  xtensa: move headers files to arch/xtensa/include
  xtensa: use the new byteorder headers
2009-01-07 11:56:29 -08:00
Harvey Harrison 91a15026eb xtensa: switch to packed struct unaligned access implementation
Rely on byteorder.h checking for endianness.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2008-11-11 06:14:10 -08:00
Chris Zankel 367b8112fe xtensa: move headers files to arch/xtensa/include
Move all header files for xtensa to arch/xtensa/include and platform and
variant header files to the appropriate arch/xtensa/platforms/ and
arch/xtensa/variants/ directories.

Moving the files gets also rid of all uses of symlinks in the Makefile.

This has been completed already for the majority of the architectures
and xtensa is one out of six missing.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chris Zankel <chris@zankel.net>
2008-11-06 10:25:09 -08:00