Commit Graph

31 Commits

Author SHA1 Message Date
Lennert Buytenhek 15d014d131 [PATCH] intel ixp2000 network driver
The way the hardware and firmware work is that there is one shared RX
queue and IRQ for a number of different network interfaces.  Due to this,
we would like to process received packets for every interface in the same
NAPI poll handler, so we need a pseudo-device to schedule polling on.

What the driver currently does is that it always schedules polling for
the first network interface in the list, and processes packets for every
interface in the poll handler for that first interface -- however, this
scheme breaks down if the first network interface happens to not be up,
since netif_rx_schedule_prep() checks netif_running().

sky2 apparently has the same issue, and Stephen Hemminger suggested a
way to work around this: create a variant of netif_rx_schedule_prep()
that does not check netif_running().  I implemented this locally and
called it netif_rx_schedule_prep_notup(), and it seems to work well,
but it's something that probably not everyone would be happy with.

The ixp2000 is an ARM CPU with a high-speed network interface in the
CPU itself (full duplex 4Gb/s or 10Gb/s depending on the IXP model.)
The CPU package also contains 8 or 16 (again depending on the IXP
model) 'microengines', which are somewhat primitive but very fast
and efficient processor cores which can be used to offload various
things from the main CPU.

This driver makes the high-speed network interface in the CPU visible
and usable as a regular linux network device.  Currently, it only
supports the Radisys ENP2611 IXP board, but adding support for other
board types should be fairly easy.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:32:22 -05:00
Andy Fleming 7f7f53168d [PATCH] Gianfar update and sysfs support
This seems to have gotten lost, so I'll resend.

Signed-off-by: Andy Fleming <afleming@freescale.com>

* Added sysfs support to gianfar for modifying FIFO and stashing parameters
* Updated driver to support 10 Mbit, full duplex operation
* Improved comments throughout
* Cleaned up and optimized offloading code
* Fixed a bug where rx buffers were being improperly mapped and unmapped
* (only manifested if cache-coherency was off)
* Added support for using the eTSEC exact-match MAC registers
* Bumped the version to 1.3
* Added support for distinguishing between reduced 100 and 10 Mbit modes
* Modified default coalescing values to lower latency
* Added documentation
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18 13:31:26 -05:00
Jeff Garzik 3b621ee5df Merge branch 'master' 2005-11-11 05:51:24 -05:00
Matt Domsch b3f9b92a6e [PPP]: add PPP MPPE encryption module
From: Matt Domsch <Matt_Domsch@dell.com>

The patch below implements the Microsoft Point-to-Point Encryption method
as a PPP compressor/decompressor.  This is necessary for Linux clients and
servers to interoperate with Microsoft Point-to-Point Tunneling Protocol
(PPTP) servers (either Microsoft PPTP servers or the poptop project) which
use MPPE to encrypt data when creating a VPN.

This patch differs from the kernel_ppp_mppe DKMS pacakge at
pptpclient.sourceforge.net by utilizing the kernel crypto routines rather
than providing its own SHA1 and arcfour implementations.

Minor changes to ppp_generic.c try to prevent a link from disabling
compression (in our case, the encryption) after it has started using
compression (encryption).

Feedback to <pptpclient-devel@lists.sourceforge.net> please.

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Cc: James Cameron <james.cameron@hp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 09:40:47 -08:00
Jeff Garzik 7211bb9b64 Merge branch 'master' 2005-11-05 15:39:24 -05:00
Pantelis Antoniou 48257c4f16 Add fs_enet ethernet network driver, for several embedded platforms. 2005-10-28 16:25:58 -04:00
Jeff Garzik 9089068785 Merge branch 'master' 2005-10-28 12:17:52 -04:00
Ralf Baechle dcbf847756 [PATCH] mipsnet: Virtual ethernet driver for MIPSsim.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/Kconfig   |    8 +
 drivers/net/Makefile  |    1
 drivers/net/mipsnet.c |  371 ++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/mipsnet.h |  127 +++++++++++++++++
 4 files changed, 507 insertions(+)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:03:48 -04:00
Jeff Garzik 3c8c7b2f32 Merge branch 'upstream-fixes' 2005-10-03 22:06:19 -04:00
David S. Miller 1f26dac320 [NET]: Add Sun Cassini driver.
Written by Adrian Sun (asun@darksunrising.com).
Ported to 2.6.x by Tom 'spot' Callaway <tcallawa@redhat.com>.
Further cleaned up and integrated by David S. Miller

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27 15:24:13 -07:00
Andy Fleming bb40dcbb0f [netdrvr gianfar] use new phy layer
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-23 22:54:21 -04:00
Matt Porter f89efd523b [PATCH] Add rapidio net driver
Adds an "Ethernet" driver which sends Ethernet packets over the standard
RapidIO messaging.  This depends on the core RIO patch for mailbox/doorbell
access.

Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14 09:18:21 -04:00
Jeff Garzik d7f6884ae0 Merge /spare/repo/linux-2.6/ 2005-09-14 08:01:25 -04:00
Jens Osterkamp aaec0fab5f [PATCH] net: add driver for the NIC on Cell Blades
This patch adds a driver for a new 1000 Mbit ethernet NIC.  It is
integrated on the south bridge that is used for our Cell Blades.

The code gets the MAC address from the Open Firmware device tree, so it
won't compile on platforms other than ppc64.

This is the first public release, so I don't expect the first version to
get merged, but I'd aim for integration within the 2.6.13 time frame.

Cc: Utz Bacher <utz.bacher@de.ibm.com>
Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-06 22:17:49 -04:00
Jeff Garzik 39fbe47377 /spare/repo/netdev-2.6 branch 'chelsio' 2005-08-29 16:53:08 -04:00
Jeff Garzik c1b054d03f Merge /spare/repo/linux-2.6/ 2005-08-29 16:40:27 -04:00
Jeff Garzik 8aaf226a8e /spare/repo/netdev-2.6 branch 'sis190' 2005-08-29 15:52:56 -04:00
Stephen Hemminger cd28ab6a4e [PATCH] sky2: new experimental Marvell Yukon2 driver
New driver for the Marvell Yukon2 Gigabit Ethernet chipset.
This driver is based on the skge driver, but using the logic
from the SysKonnect version of the sk98lin driver.
It should support all the Yukon2 chipsets that are available
in many current Intel and AMD motherboards.

The driver does support ethtool, tx and rx checksum, and
tcp segmentation offload.  But it has only been tested for
a short while and is known to stop receiving under heavy load.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-17 00:53:12 -04:00
Andy Fleming 00db8189d9 This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling
ethernet drivers to remain as ignorant as is reasonable of the connected
PHY's design and operation details.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30 19:31:23 -04:00
Francois Romieu 890e8d0a3d [PATCH] sis190: resurrection
Raise the sis190 driver from the dead

The driver handles the integrated network device found on SiS 965L
chipset. It follows the classical (non-napi) interrupt-driven model
and provides minimal ethtool support.

The code comes from a heavy cleanup/rewrite of the original code
which was removed from the kernel on 14/04/2004. Since the r8169
driver does not work too bad and there will probably be (at least)
a few months of improvements/testing/fixing, I made the code as
close as possible to the r8169 one.

Pascal Chapperon <pascal.chapperon@wanadoo.fr> deserves some special
credit for testing and bug-catching. Many thanks to Lars Vahlenberg
as well.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30 18:20:59 -04:00
Jeff Garzik a532434395 Merge /spare/repo/linux-2.6/ 2005-06-22 21:50:57 -04:00
2089a0d38b Automatic merge of /spare/repo/netdev-2.6 branch skge 2005-06-04 17:54:39 -04:00
bdb7a3427b Automatic merge of /spare/repo/netdev-2.6 branch remove-drivers 2005-06-04 17:12:32 -04:00
79121839aa Automatic merge of /spare/repo/netdev-2.6 branch dm9000 2005-06-04 17:02:29 -04:00
Michael Chan b6016b7673 [BNX2]: New Broadcom gigabit network driver.
A new driver bnx2 for Broadcom bcm5706 is available.

The patch also includes new 1000BASE-X advertisement bit definitions in
mii.h

Thanks to David Miller and Jeff Garzik for reviewing and their valuable
feedback.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-26 13:03:09 -07:00
Al Viro f7a3aae172 [PATCH] drivers/net/wireless enabled by wrong option
NET_WIRELESS is only a subset of the stuff in drivers/net/wireless;
NET_RADIO is what covers all of them.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
2005-05-15 22:22:32 -04:00
Christoph Lameter 8199d3a79c [PATCH] A new 10GB Ethernet Driver by Chelsio Communications
A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio
(http://www.chelsio.com).  This driver supports the Chelsio N210 NIC and is
backward compatible with the Chelsio N110 model 10Gb NICs.  It supports
AMD64, EM64T and x86 systems.

Signed-off-by: Tina Yang <tinay@chelsio.com>
Signed-off-by: Scott Bardone <sbardone@chelsio.com>
Signed-off-by: Christoph Lameter <christoph@lameter.com>

Adrian said:

- my3126.c is unused (because t1_my3126_ops isn't used anywhere)
- what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for?
- $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded
- completely unused global functions:
  - espi.c: t1_espi_get_intr_counts
  - sge.c: t1_sge_get_intr_counts
- the following functions can be made static:
  - sge.c: t1_espi_workaround
  - sge.c: t1_sge_tx
  - subr.c: __t1_tpi_read
  - subr.c: __t1_tpi_write
  - subr.c: t1_wait_op_done

shemminger said:

The performance recommendations in cxgb.txt are common to all fast devices,
and should be in one file rather than just for this device. I would rather
see ip-sysctl.txt updated or a new file on tuning recommendations started.
Some of them have consequences that aren't documented well.
For example, turning off TCP timestamps risks data corruption from sequence wrap.

A new driver shouldn't need so may #ifdef's unless you want to putit on older
vendor versions of 2.4

Some accessor and wrapper functions like:
        t1_pci_read_config_4
        adapter_name
        t1_malloc
are just annoying noise.

Why have useless dead code like:

/* Interrupt handler */
+static int pm3393_interrupt_handler(struct cmac *cmac)
+{
+       u32 master_intr_status;
+/*
+    1. Read master interrupt register.
+    2. Read BLOCK's interrupt status registers.
+    3. Handle BLOCK interrupts.
+*/

Jeff said:

step 1:  kill all the OS wrappers.

 And do you really need hooks for multiple MACs, when only one MAC is
 really supported?  Typically these hooks are at a higher level anyway --
 struct net_device.

From: Christoph Lameter <christoph@lameter

Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian
Bunk.  Reduces the size of the driver to ~260k.

- clean up tabs
- removed my3126.c
- removed 85% of suni1x10gexp_regs.h
- removed 80% of regs.h
- removed various calls, renamed variables/functions.
- removed system specific and other wrappers (usleep, msleep)
- removed dead code
- dropped redundant casts in osdep.h
- dropped redundant check of kfree
- dropped weird code (MODVERSIONS stuff)
- reduced number of #ifdefs
- use kcalloc now instead of kmalloc
- Add information about known issues with the driver
- Add information about authors

Signed-off-by: Scott Bardone <sbardone@chelsio.com>
Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

diff -puN /dev/null Documentation/networking/cxgb.txt
2005-05-15 19:15:02 -04:00
Sascha Hauer a1365275e7 [PATCH] DM9000 network driver
This patch adds support for the davicom dm9000 network driver.  The dm9000
is found on some embedded arm boards such as the pimx1 or the scb9328.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>

diff -puN /dev/null drivers/net/dm9000.c
2005-05-15 18:31:07 -04:00
Adrian Bunk 5aa83a4c0a [PATCH] remove two obsolete net drivers
The options FMV18X and SK_G16 do depend on the non-available
  CONFIG_OBSOLETE even in kernel 2.4 - IOW, the last time it was able to
  select them was in kernel 2.2 (or even before).
  
  Since it seems noone misses these drivers, this patch removes them.
  
  Signed-off-by: Adrian Bunk <bunk@stusta.de>
  Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-05-12 22:27:35 -04:00
Stephen Hemminger baef58b1b0 [netdrvr] new driver skge, for SysKonnect cards 2005-05-12 20:14:36 -04:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00