Commit Graph

9433 Commits

Author SHA1 Message Date
Linus Torvalds 43d86ee8c6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "Several fixes here. Basically split down the line between newly
  introduced regressions and long existing problems:

   1) Double free in tipc_enable_bearer(), from Cong Wang.

   2) Many fixes to nf_conncount, from Florian Westphal.

   3) op->get_regs_len() can throw an error, check it, from Yunsheng
      Lin.

   4) Need to use GFP_ATOMIC in *_add_hash_mac_address() of fsl/fman
      driver, from Scott Wood.

   5) Inifnite loop in fib_empty_table(), from Yue Haibing.

   6) Use after free in ax25_fillin_cb(), from Cong Wang.

   7) Fix socket locking in nr_find_socket(), also from Cong Wang.

   8) Fix WoL wakeup enable in r8169, from Heiner Kallweit.

   9) On 32-bit sock->sk_stamp is not thread-safe, from Deepa Dinamani.

  10) Fix ptr_ring wrap during queue swap, from Cong Wang.

  11) Missing shutdown callback in hinic driver, from Xue Chaojing.

  12) Need to return NULL on error from ip6_neigh_lookup(), from Stefano
      Brivio.

  13) BPF out of bounds speculation fixes from Daniel Borkmann"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits)
  ipv6: Consider sk_bound_dev_if when binding a socket to an address
  ipv6: Fix dump of specific table with strict checking
  bpf: add various test cases to selftests
  bpf: prevent out of bounds speculation on pointer arithmetic
  bpf: fix check_map_access smin_value test when pointer contains offset
  bpf: restrict unknown scalars of mixed signed bounds for unprivileged
  bpf: restrict stack pointer arithmetic for unprivileged
  bpf: restrict map value pointer arithmetic for unprivileged
  bpf: enable access to ax register also from verifier rewrite
  bpf: move tmp variable into ax register in interpreter
  bpf: move {prev_,}insn_idx into verifier env
  isdn: fix kernel-infoleak in capi_unlocked_ioctl
  ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() error
  net/hamradio/6pack: use mod_timer() to rearm timers
  net-next/hinic:add shutdown callback
  net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT
  ip: validate header length on virtual device xmit
  tap: call skb_probe_transport_header after setting skb->dev
  ptr_ring: wrap back ->producer in __ptr_ring_swap_queue()
  net: rds: remove unnecessary NULL check
  ...
2019-01-03 12:53:47 -08:00
Willem de Bruijn cb9f1b7838 ip: validate header length on virtual device xmit
KMSAN detected read beyond end of buffer in vti and sit devices when
passing truncated packets with PF_PACKET. The issue affects additional
ip tunnel devices.

Extend commit 76c0ddd8c3 ("ip6_tunnel: be careful when accessing the
inner header") and commit ccfec9e5cb ("ip_tunnel: be careful when
accessing the inner header").

Move the check to a separate helper and call at the start of each
ndo_start_xmit function in net/ipv4 and net/ipv6.

Minor changes:
- convert dev_kfree_skb to kfree_skb on error path,
  as dev_kfree_skb calls consume_skb which is not for error paths.
- use pskb_network_may_pull even though that is pedantic here,
  as the same as pskb_may_pull for devices without llheaders.
- do not cache ipv6 hdrs if used only once
  (unsafe across pskb_may_pull, was more relevant to earlier patch)

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01 12:05:02 -08:00
YueHaibing 58075ff523 ipv4: fib_rules: Fix possible infinite loop in fib_empty_table
gcc warn this:
net/ipv4/fib_rules.c:203 fib_empty_table() warn:
 always true condition '(id <= 4294967295) => (0-u32max <= u32max)'

'id' is u32, which always not greater than RT_TABLE_MAX
(0xFFFFFFFF), So add a check to break while wrap around.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-30 12:57:04 -08:00
Arun KS ca79b0c211 mm: convert totalram_pages and totalhigh_pages variables to atomic
totalram_pages and totalhigh_pages are made static inline function.

Main motivation was that managed_page_count_lock handling was complicating
things.  It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.

[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:47 -08:00
David S. Miller 90cadbbf34 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull in bug fixes before respinning my net-next pull
request.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-24 16:19:56 -08:00
Peter Oskolkov c92c81df93 net: dccp: fix kernel crash on module load
Patch eedbbb0d98 "net: dccp: initialize (addr,port) ..."
added calling to inet_hashinfo2_init() from dccp_init().

However, inet_hashinfo2_init() is marked as __init(), and
thus the kernel panics when dccp is loaded as module. Removing
__init() tag from inet_hashinfo2_init() is not feasible because
it calls into __init functions in mm.

This patch adds inet_hashinfo2_init_mod() function that can
be called after the init phase is done; changes dccp_init() to
call the new function; un-marks inet_hashinfo2_init() as
exported.

Fixes: eedbbb0d98 ("net: dccp: initialize (addr,port) ...")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-24 15:27:56 -08:00
wenxu 7bdca378b2 iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
ip l add tun type gretap external
ip r a 10.0.0.2 encap ip id 1000 dst 172.168.0.2 key dev tun
ip a a 10.0.0.1/24 dev tun

The peer arp request to 10.0.0.1 with tunnel_id, but the arp reply
only set the tun_id but not the tun_flags with TUNNEL_KEY. The arp
reply packet don't contain tun_id field.

Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-24 14:20:25 -08:00
David S. Miller ce28bb4453 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-12-21 15:06:20 -08:00
Eric Dumazet f0c928d878 tcp: fix a race in inet_diag_dump_icsk()
Alexei reported use after frees in inet_diag_dump_icsk() [1]

Because we use refcount_set() when various sockets are setup and
inserted into ehash, we also need to make sure inet_diag_dump_icsk()
wont race with the refcount_set() operations.

Jonathan Lemon sent a patch changing net_twsk_hashdance() but
other spots would need risky changes.

Instead, fix inet_diag_dump_icsk() as this bug came with
linux-4.10 only.

[1] Quoting Alexei :

First something iterating over sockets finds already freed tw socket:

refcount_t: increment on 0; use-after-free.
WARNING: CPU: 2 PID: 2738 at lib/refcount.c:153 refcount_inc+0x26/0x30
RIP: 0010:refcount_inc+0x26/0x30
RSP: 0018:ffffc90004c8fbc0 EFLAGS: 00010282
RAX: 000000000000002b RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88085ee9d680 RSI: ffff88085ee954c8 RDI: ffff88085ee954c8
RBP: ffff88010ecbd2c0 R08: 0000000000000000 R09: 000000000000174c
R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8806ba9bf210 R14: ffffffff82304600 R15: ffff88010ecbd328
FS:  00007f81f5a7d700(0000) GS:ffff88085ee80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f81e2a95000 CR3: 000000069b2eb006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 inet_diag_dump_icsk+0x2b3/0x4e0 [inet_diag]  // sock_hold(sk); in net/ipv4/inet_diag.c:1002
 ? kmalloc_large_node+0x37/0x70
 ? __kmalloc_node_track_caller+0x1cb/0x260
 ? __alloc_skb+0x72/0x1b0
 ? __kmalloc_reserve.isra.40+0x2e/0x80
 __inet_diag_dump+0x3b/0x80 [inet_diag]
 netlink_dump+0x116/0x2a0
 netlink_recvmsg+0x205/0x3c0
 sock_read_iter+0x89/0xd0
 __vfs_read+0xf7/0x140
 vfs_read+0x8a/0x140
 SyS_read+0x3f/0xa0
 do_syscall_64+0x5a/0x100

then a minute later twsk timer fires and hits two bad refcnts
for this freed socket:

refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 31 PID: 0 at lib/refcount.c:228 refcount_dec+0x2e/0x40
Modules linked in:
RIP: 0010:refcount_dec+0x2e/0x40
RSP: 0018:ffff88085f5c3ea8 EFLAGS: 00010296
RAX: 000000000000002c RBX: ffff88010ecbd2c0 RCX: 000000000000083f
RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000003f
RBP: ffffc90003c77280 R08: 0000000000000000 R09: 00000000000017d3
R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: ffffffff82ad2d80
R13: ffffffff8182de00 R14: ffff88085f5c3ef8 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fbe42685250 CR3: 0000000002209001 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 inet_twsk_kill+0x9d/0xc0  // inet_twsk_bind_unhash(tw, hashinfo);
 call_timer_fn+0x29/0x110
 run_timer_softirq+0x36b/0x3a0

refcount_t: underflow; use-after-free.
WARNING: CPU: 31 PID: 0 at lib/refcount.c:187 refcount_sub_and_test+0x46/0x50
RIP: 0010:refcount_sub_and_test+0x46/0x50
RSP: 0018:ffff88085f5c3eb8 EFLAGS: 00010296
RAX: 0000000000000026 RBX: ffff88010ecbd2c0 RCX: 000000000000083f
RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000003f
RBP: ffff88010ecbd358 R08: 0000000000000000 R09: 000000000000185b
R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: ffff88010ecbd358
R13: ffffffff8182de00 R14: ffff88085f5c3ef8 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fbe42685250 CR3: 0000000002209001 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 inet_twsk_put+0x12/0x20  // inet_twsk_put(tw);
 call_timer_fn+0x29/0x110
 run_timer_softirq+0x36b/0x3a0

Fixes: 67db3e4bfb ("tcp: no longer hold ehash lock while calling tcp_get_info()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 19:23:22 -08:00
David S. Miller c3e5336925 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Support for destination MAC in ipset, from Stefano Brivio.

2) Disallow all-zeroes MAC address in ipset, also from Stefano.

3) Add IPSET_CMD_GET_BYNAME and IPSET_CMD_GET_BYINDEX commands,
   introduce protocol version number 7, from Jozsef Kadlecsik.
   A follow up patch to fix ip_set_byindex() is also included
   in this batch.

4) Honor CTA_MARK_MASK from ctnetlink, from Andreas Jaggi.

5) Statify nf_flow_table_iterate(), from Taehee Yoo.

6) Use nf_flow_table_iterate() to simplify garbage collection in
   nf_flow_table logic, also from Taehee Yoo.

7) Don't use _bh variants of call_rcu(), rcu_barrier() and
   synchronize_rcu_bh() in Netfilter, from Paul E. McKenney.

8) Remove NFC_* cache definition from the old caching
   infrastructure.

9) Remove layer 4 port rover in NAT helpers, use random port
   instead, from Florian Westphal.

10) Use strscpy() in ipset, from Qian Cai.

11) Remove NF_NAT_RANGE_PROTO_RANDOM_FULLY branch now that
    random port is allocated by default, from Xiaozhou Liu.

12) Ignore NF_NAT_RANGE_PROTO_RANDOM too, from Florian Westphal.

13) Limit port allocation selection routine in NAT to avoid
    softlockup splats when most ports are in use, from Florian.

14) Remove unused parameters in nf_ct_l4proto_unregister_sysctl()
    from Yafang Shao.

15) Direct call to nf_nat_l4proto_unique_tuple() instead of
    indirection, from Florian Westphal.

16) Several patches to remove all layer 4 NAT indirections,
    remove nf_nat_l4proto struct, from Florian Westphal.

17) Fix RTP/RTCP source port translation when SNAT is in place,
    from Alin Nastac.

18) Selective rule dump per chain, from Phil Sutter.

19) Revisit CLUSTERIP target, this includes a deadlock fix from
    netns path, sleep in atomic, remove bogus WARN_ON_ONCE()
    and disallow mismatching IP address and MAC address.
    Patchset from Taehee Yoo.

20) Update UDP timeout to stream after 2 seconds, from Florian.

21) Shrink UDP established timeout to 120 seconds like TCP timewait.

22) Sysctl knobs to set GRE timeouts, from Yafang Shao.

23) Move seq_print_acct() to conntrack core file, from Florian.

24) Add enum for conntrack sysctl knobs, also from Florian.

25) Place nf_conntrack_acct, nf_conntrack_helper, nf_conntrack_events
    and nf_conntrack_timestamp knobs in the core, from Florian Westphal.
    As a side effect, shrink netns_ct structure by removing obsolete
    sysctl anchors, also from Florian.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 18:20:26 -08:00
David S. Miller 339bbff2d6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2018-12-21

The following pull-request contains BPF updates for your *net-next* tree.

There is a merge conflict in test_verifier.c. Result looks as follows:

        [...]
        },
        {
                "calls: cross frame pruning",
                .insns = {
                [...]
                .prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
                .errstr_unpriv = "function calls to other bpf functions are allowed for root only",
                .result_unpriv = REJECT,
                .errstr = "!read_ok",
                .result = REJECT,
	},
        {
                "jset: functional",
                .insns = {
        [...]
        {
                "jset: unknown const compare not taken",
                .insns = {
                        BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
                                     BPF_FUNC_get_prandom_u32),
                        BPF_JMP_IMM(BPF_JSET, BPF_REG_0, 1, 1),
                        BPF_LDX_MEM(BPF_B, BPF_REG_8, BPF_REG_9, 0),
                        BPF_EXIT_INSN(),
                },
                .prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
                .errstr_unpriv = "!read_ok",
                .result_unpriv = REJECT,
                .errstr = "!read_ok",
                .result = REJECT,
        },
        [...]
        {
                "jset: range",
                .insns = {
                [...]
                },
                .prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
                .result_unpriv = ACCEPT,
                .result = ACCEPT,
        },

The main changes are:

1) Various BTF related improvements in order to get line info
   working. Meaning, verifier will now annotate the corresponding
   BPF C code to the error log, from Martin and Yonghong.

2) Implement support for raw BPF tracepoints in modules, from Matt.

3) Add several improvements to verifier state logic, namely speeding
   up stacksafe check, optimizations for stack state equivalence
   test and safety checks for liveness analysis, from Alexei.

4) Teach verifier to make use of BPF_JSET instruction, add several
   test cases to kselftests and remove nfp specific JSET optimization
   now that verifier has awareness, from Jakub.

5) Improve BPF verifier's slot_type marking logic in order to
   allow more stack slot sharing, from Jiong.

6) Add sk_msg->size member for context access and add set of fixes
   and improvements to make sock_map with kTLS usable with openssl
   based applications, from John.

7) Several cleanups and documentation updates in bpftool as well as
   auto-mount of tracefs for "bpftool prog tracelog" command,
   from Quentin.

8) Include sub-program tags from now on in bpf_prog_info in order to
   have a reliable way for user space to get all tags of the program
   e.g. needed for kallsyms correlation, from Song.

9) Add BTF annotations for cgroup_local_storage BPF maps and
   implement bpf fs pretty print support, from Roman.

10) Fix bpftool in order to allow for cross-compilation, from Ivan.

11) Update of bpftool license to GPLv2-only + BSD-2-Clause in order
    to be compatible with libbfd and allow for Debian packaging,
    from Jakub.

12) Remove an obsolete prog->aux sanitation in dump and get rid of
    version check for prog load, from Daniel.

13) Fix a memory leak in libbpf's line info handling, from Prashant.

14) Fix cpumap's frame alignment for build_skb() so that skb_shared_info
    does not get unaligned, from Jesper.

15) Fix test_progs kselftest to work with older compilers which are less
    smart in optimizing (and thus throwing build error), from Stanislav.

16) Cleanup and simplify AF_XDP socket teardown, from Björn.

17) Fix sk lookup in BPF kselftest's test_sock_addr with regards
    to netns_id argument, from Andrey.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 17:31:36 -08:00
Ido Schimmel 21f9477537 net: ipv4: Set skb->dev for output route resolution
When user requests to resolve an output route, the kernel synthesizes
an skb where the relevant parameters (e.g., source address) are set. The
skb is then passed to ip_route_output_key_hash_rcu() which might call
into the flow dissector in case a multipath route was hit and a nexthop
needs to be selected based on the multipath hash.

Since both 'skb->dev' and 'skb->sk' are not set, a warning is triggered
in the flow dissector [1]. The warning is there to prevent codepaths
from silently falling back to the standard flow dissector instead of the
BPF one.

Therefore, instead of removing the warning, set 'skb->dev' to the
loopback device, as its not used for anything but resolving the correct
namespace.

[1]
WARNING: CPU: 1 PID: 24819 at net/core/flow_dissector.c:764 __skb_flow_dissect+0x314/0x16b0
...
RSP: 0018:ffffa0df41fdf650 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8bcded232000 RCX: 0000000000000000
RDX: ffffa0df41fdf7e0 RSI: ffffffff98e415a0 RDI: ffff8bcded232000
RBP: ffffa0df41fdf760 R08: 0000000000000000 R09: 0000000000000000
R10: ffffa0df41fdf7e8 R11: ffff8bcdf27a3000 R12: ffffffff98e415a0
R13: ffffa0df41fdf7e0 R14: ffffffff98dd2980 R15: ffffa0df41fdf7e0
FS:  00007f46f6897680(0000) GS:ffff8bcdf7a80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055933e95f9a0 CR3: 000000021e636000 CR4: 00000000001006e0
Call Trace:
 fib_multipath_hash+0x28c/0x2d0
 ? fib_multipath_hash+0x28c/0x2d0
 fib_select_path+0x241/0x32f
 ? __fib_lookup+0x6a/0xb0
 ip_route_output_key_hash_rcu+0x650/0xa30
 ? __alloc_skb+0x9b/0x1d0
 inet_rtm_getroute+0x3f7/0xb80
 ? __alloc_pages_nodemask+0x11c/0x2c0
 rtnetlink_rcv_msg+0x1d9/0x2f0
 ? rtnl_calcit.isra.24+0x120/0x120
 netlink_rcv_skb+0x54/0x130
 rtnetlink_rcv+0x15/0x20
 netlink_unicast+0x20a/0x2c0
 netlink_sendmsg+0x2d1/0x3d0
 sock_sendmsg+0x39/0x50
 ___sys_sendmsg+0x2a0/0x2f0
 ? filemap_map_pages+0x16b/0x360
 ? __handle_mm_fault+0x108e/0x13d0
 __sys_sendmsg+0x63/0xa0
 ? __sys_sendmsg+0x63/0xa0
 __x64_sys_sendmsg+0x1f/0x30
 do_syscall_64+0x5a/0x120
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: d0e13a1488 ("flow_dissector: lookup netns by skb->sk if skb->dev is NULL")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 16:42:39 -08:00
John Fastabend 0608c69c9a bpf: sk_msg, sock{map|hash} redirect through ULP
A sockmap program that redirects through a kTLS ULP enabled socket
will not work correctly because the ULP layer is skipped. This
fixes the behavior to call through the ULP layer on redirect to
ensure any operations required on the data stream at the ULP layer
continue to be applied.

To do this we add an internal flag MSG_SENDPAGE_NOPOLICY to avoid
calling the BPF layer on a redirected message. This is
required to avoid calling the BPF layer multiple times (possibly
recursively) which is not the current/expected behavior without
ULPs. In the future we may add a redirect flag if users _do_
want the policy applied again but this would need to work for both
ULP and non-ULP sockets and be opt-in to avoid breaking existing
programs.

Also to avoid polluting the flag space with an internal flag we
reuse the flag space overlapping MSG_SENDPAGE_NOPOLICY with
MSG_WAITFORONE. Here WAITFORONE is specific to recv path and
SENDPAGE_NOPOLICY is only used for sendpage hooks. The last thing
to verify is user space API is masked correctly to ensure the flag
can not be set by user. (Note this needs to be true regardless
because we have internal flags already in-use that user space
should not be able to set). But for completeness we have two UAPI
paths into sendpage, sendfile and splice.

In the sendfile case the function do_sendfile() zero's flags,

./fs/read_write.c:
 static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos,
		   	    size_t count, loff_t max)
 {
   ...
   fl = 0;
#if 0
   /*
    * We need to debate whether we can enable this or not. The
    * man page documents EAGAIN return for the output at least,
    * and the application is arguably buggy if it doesn't expect
    * EAGAIN on a non-blocking file descriptor.
    */
    if (in.file->f_flags & O_NONBLOCK)
	fl = SPLICE_F_NONBLOCK;
#endif
    file_start_write(out.file);
    retval = do_splice_direct(in.file, &pos, out.file, &out_pos, count, fl);
 }

In the splice case the pipe_to_sendpage "actor" is used which
masks flags with SPLICE_F_MORE.

./fs/splice.c:
 static int pipe_to_sendpage(struct pipe_inode_info *pipe,
			    struct pipe_buffer *buf, struct splice_desc *sd)
 {
   ...
   more = (sd->flags & SPLICE_F_MORE) ? MSG_MORE : 0;
   ...
 }

Confirming what we expect that internal flags  are in fact internal
to socket side.

Fixes: d3b18ad31f ("tls: add bpf support to sk_msg handling")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20 23:47:09 +01:00
John Fastabend 552de91068 bpf: sk_msg, fix socket data_ready events
When a skb verdict program is in-use and either another BPF program
redirects to that socket or the new SK_PASS support is used the
data_ready callback does not wake up application. Instead because
the stream parser/verdict is using the sk data_ready callback we wake
up the stream parser/verdict block.

Fix this by adding a helper to check if the stream parser block is
enabled on the sk and if so call the saved pointer which is the
upper layers wake up function.

This fixes application stalls observed when an application is waiting
for data in a blocking read().

Fixes: d829e9c411 ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20 23:47:09 +01:00
David S. Miller 2be09de7d6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.

Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 11:53:36 -08:00
Florian Westphal 2294be0f11 net: use skb_sec_path helper in more places
skb_sec_path gains 'const' qualifier to avoid
xt_policy.c: 'skb_sec_path' discards 'const' qualifier from pointer target type

same reasoning as previous conversions: Won't need to touch these
spots anymore when skb->sp is removed.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 11:21:37 -08:00
Florian Westphal 0ca64da128 xfrm: change secpath_set to return secpath struct, not error value
It can only return 0 (success) or -ENOMEM.
Change return value to a pointer to secpath struct.

This avoids direct access to skb->sp:

err = secpath_set(skb);
if (!err) ..
skb->sp-> ...

Becomes:
sp = secpath_set(skb)
if (!sp) ..
sp-> ..

This reduces noise in followup patch which is going to remove skb->sp.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 11:21:37 -08:00
Florian Westphal df5042f4c5 sk_buff: add skb extension infrastructure
This adds an optional extension infrastructure, with ispec (xfrm) and
bridge netfilter as first users.
objdiff shows no changes if kernel is built without xfrm and br_netfilter
support.

The third (planned future) user is Multipath TCP which is still
out-of-tree.
MPTCP needs to map logical mptcp sequence numbers to the tcp sequence
numbers used by individual subflows.

This DSS mapping is read/written from tcp option space on receive and
written to tcp option space on transmitted tcp packets that are part of
and MPTCP connection.

Extending skb_shared_info or adding a private data field to skb fclones
doesn't work for incoming skb, so a different DSS propagation method would
be required for the receive side.

mptcp has same requirements as secpath/bridge netfilter:

1. extension memory is released when the sk_buff is free'd.
2. data is shared after cloning an skb (clone inherits extension)
3. adding extension to an skb will COW the extension buffer if needed.

The "MPTCP upstreaming" effort adds SKB_EXT_MPTCP extension to store the
mapping for tx and rx processing.

Two new members are added to sk_buff:
1. 'active_extensions' byte (filling a hole), telling which extensions
   are available for this skb.
   This has two purposes.
   a) avoids the need to initialize the pointer.
   b) allows to "delete" an extension by clearing its bit
   value in ->active_extensions.

   While it would be possible to store the active_extensions byte
   in the extension struct instead of sk_buff, there is one problem
   with this:
    When an extension has to be disabled, we can always clear the
    bit in skb->active_extensions.  But in case it would be stored in the
    extension buffer itself, we might have to COW it first, if
    we are dealing with a cloned skb.  On kmalloc failure we would
    be unable to turn an extension off.

2. extension pointer, located at the end of the sk_buff.
   If the active_extensions byte is 0, the pointer is undefined,
   it is not initialized on skb allocation.

This adds extra code to skb clone and free paths (to deal with
refcount/free of extension area) but this replaces similar code that
manages skb->nf_bridge and skb->sp structs in the followup patches of
the series.

It is possible to add support for extensions that are not preseved on
clones/copies.

To do this, it would be needed to define a bitmask of all extensions that
need copy/cow semantics, and change __skb_ext_copy() to check
->active_extensions & SKB_EXT_PRESERVE_ON_CLONE, then just set
->active_extensions to 0 on the new clone.

This isn't done here because all extensions that get added here
need the copy/cow semantics.

v2:
Allocate entire extension space using kmem_cache.
Upside is that this allows better tracking of used memory,
downside is that we will allocate more space than strictly needed in
most cases (its unlikely that all extensions are active/needed at same
time for same skb).
The allocated memory (except the small extension header) is not cleared,
so no additonal overhead aside from memory usage.

Avoid atomic_dec_and_test operation on skb_ext_put()
by using similar trick as kfree_skbmem() does with fclone_ref:
If recount is 1, there is no concurrent user and we can free right away.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 11:21:37 -08:00
Florian Westphal c4b0e771f9 netfilter: avoid using skb->nf_bridge directly
This pointer is going to be removed soon, so use the existing helpers in
more places to avoid noise when the removal happens.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 11:21:37 -08:00
David Ahern 6e0735d1f7 ipmr: Drop mfc_cache argument to ipmr_queue_xmit
mfc_cache is not needed by ipmr_queue_xmit so drop it from the input
argument list.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17 23:31:14 -08:00
Willem de Bruijn 8f932f762e net: add missing SOF_TIMESTAMPING_OPT_ID support
SOF_TIMESTAMPING_OPT_ID is supported on TCP, UDP and RAW sockets.
But it was missing on RAW with IPPROTO_IP, PF_PACKET and CAN.

Add skb_setup_tx_timestamp that configures both tx_flags and tskey
for these paths that do not need corking or use bytestream keys.

Fixes: 09c2d251b7 ("net-timestamp: add key to disambiguate concurrent datagrams")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17 23:27:00 -08:00
Peter Oskolkov eedbbb0d98 net: dccp: initialize (addr,port) listening hashtable
Commit d9fbc7f643 "net: tcp: prefer listeners bound to an address"
removes port-only listener lookups. This caused segfaults in DCCP
lookups because DCCP did not initialize the (addr,port) hashtable.

This patch adds said initialization.

The only non-trivial issue here is the size of the new hashtable.
It seemed reasonable to make it match the size of the port-only
hashtable (= INET_LHTABLE_SIZE) that was used previously. Other
parameters to inet_hashinfo2_init() match those used in TCP.

V2 changes: marked inet_hashinfo2_init as an exported symbol
so that DCCP compiles when configured as a module.

Tested: syzcaller issues fixed; the second patch in the patchset
        tests that DCCP lookups work correctly.

Fixes: d9fbc7f643 "net: tcp: prefer listeners bound to an address"
Reported-by: syzcaller <syzkaller@googlegroups.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17 23:11:48 -08:00
Stefano Brivio 11789039da fou: Prevent unbounded recursion in GUE error handler
Handling exceptions for direct UDP encapsulation in GUE (that is,
UDP-in-UDP) leads to unbounded recursion in the GUE exception handler,
syzbot reported.

While draft-ietf-intarea-gue-06 doesn't explicitly forbid direct
encapsulation of UDP in GUE, it probably doesn't make sense to set up GUE
this way, and it's currently not even possible to configure this.

Skip exception handling if the GUE proto/ctype field is set to the UDP
protocol number. Should we need to handle exceptions for UDP-in-GUE one
day, we might need to either explicitly set a bound for recursion, or
implement a special iterative handling for these cases.

Reported-and-tested-by: syzbot+43f6755d1c2e62743468@syzkaller.appspotmail.com
Fixes: b8a51b38e4 ("fou, fou6: ICMP error handlers for FoU and GUE")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17 21:38:04 -08:00
Taehee Yoo 06aa151ad1 netfilter: ipt_CLUSTERIP: check MAC address when duplicate config is set
If same destination IP address config is already existing, that config is
just used. MAC address also should be same.
However, there is no MAC address checking routine.
So that MAC address checking routine is added.

test commands:
   %iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \
	   -j CLUSTERIP --new --hashmode sourceip \
	   --clustermac 01:00:5e:00:00:20 --total-nodes 2 --local-node 1
   %iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \
	   -j CLUSTERIP --new --hashmode sourceip \
	   --clustermac 01:00:5e:00:00:21 --total-nodes 2 --local-node 1

After this patch, above commands are disallowed.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-18 01:18:38 +01:00
Taehee Yoo 2a61d8b883 netfilter: ipt_CLUSTERIP: fix sleep-in-atomic bug in clusterip_config_entry_put()
A proc_remove() can sleep. so that it can't be inside of spin_lock.
Hence proc_remove() is moved to outside of spin_lock. and it also
adds mutex to sync create and remove of proc entry(config->pde).

test commands:
SHELL#1
   %while :; do iptables -A INPUT -p udp -i enp2s0 -d 192.168.1.100 \
	   --dport 9000  -j CLUSTERIP --new --hashmode sourceip \
	   --clustermac 01:00:5e:00:00:21 --total-nodes 3 --local-node 3; \
	   iptables -F; done

SHELL#2
   %while :; do echo +1 > /proc/net/ipt_CLUSTERIP/192.168.1.100; \
	   echo -1 > /proc/net/ipt_CLUSTERIP/192.168.1.100; done

[ 2949.569864] BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
[ 2949.579944] in_atomic(): 1, irqs_disabled(): 0, pid: 5472, name: iptables
[ 2949.587920] 1 lock held by iptables/5472:
[ 2949.592711]  #0: 000000008f0ebcf2 (&(&cn->lock)->rlock){+...}, at: refcount_dec_and_lock+0x24/0x50
[ 2949.603307] CPU: 1 PID: 5472 Comm: iptables Tainted: G        W         4.19.0-rc5+ #16
[ 2949.604212] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[ 2949.604212] Call Trace:
[ 2949.604212]  dump_stack+0xc9/0x16b
[ 2949.604212]  ? show_regs_print_info+0x5/0x5
[ 2949.604212]  ___might_sleep+0x2eb/0x420
[ 2949.604212]  ? set_rq_offline.part.87+0x140/0x140
[ 2949.604212]  ? _rcu_barrier_trace+0x400/0x400
[ 2949.604212]  wait_for_completion+0x94/0x710
[ 2949.604212]  ? wait_for_completion_interruptible+0x780/0x780
[ 2949.604212]  ? __kernel_text_address+0xe/0x30
[ 2949.604212]  ? __lockdep_init_map+0x10e/0x5c0
[ 2949.604212]  ? __lockdep_init_map+0x10e/0x5c0
[ 2949.604212]  ? __init_waitqueue_head+0x86/0x130
[ 2949.604212]  ? init_wait_entry+0x1a0/0x1a0
[ 2949.604212]  proc_entry_rundown+0x208/0x270
[ 2949.604212]  ? proc_reg_get_unmapped_area+0x370/0x370
[ 2949.604212]  ? __lock_acquire+0x4500/0x4500
[ 2949.604212]  ? complete+0x18/0x70
[ 2949.604212]  remove_proc_subtree+0x143/0x2a0
[ 2949.708655]  ? remove_proc_entry+0x390/0x390
[ 2949.708655]  clusterip_tg_destroy+0x27a/0x630 [ipt_CLUSTERIP]
[ ... ]

Fixes: b3e456fce9 ("netfilter: ipt_CLUSTERIP: fix a race condition of proc file creation")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-18 01:18:24 +01:00
Taehee Yoo b12f7bad5a netfilter: ipt_CLUSTERIP: remove wrong WARN_ON_ONCE in netns exit routine
When network namespace is destroyed, both clusterip_tg_destroy() and
clusterip_net_exit() are called. and clusterip_net_exit() is called
before clusterip_tg_destroy().
Hence cleanup check code in clusterip_net_exit() doesn't make sense.

test commands:
   %ip netns add vm1
   %ip netns exec vm1 bash
   %ip link set lo up
   %iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \
	-j CLUSTERIP --new --hashmode sourceip \
	--clustermac 01:00:5e:00:00:20 --total-nodes 2 --local-node 1
   %exit
   %ip netns del vm1

splat looks like:
[  341.184508] WARNING: CPU: 1 PID: 87 at net/ipv4/netfilter/ipt_CLUSTERIP.c:840 clusterip_net_exit+0x319/0x380 [ipt_CLUSTERIP]
[  341.184850] Modules linked in: ipt_CLUSTERIP nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_tcpudp iptable_filter bpfilter ip_tables x_tables
[  341.184850] CPU: 1 PID: 87 Comm: kworker/u4:2 Not tainted 4.19.0-rc5+ #16
[  341.227509] Workqueue: netns cleanup_net
[  341.227509] RIP: 0010:clusterip_net_exit+0x319/0x380 [ipt_CLUSTERIP]
[  341.227509] Code: 0f 85 7f fe ff ff 48 c7 c2 80 64 2c c0 be a8 02 00 00 48 c7 c7 a0 63 2c c0 c6 05 18 6e 00 00 01 e8 bc 38 ff f5 e9 5b fe ff ff <0f> 0b e9 33 ff ff ff e8 4b 90 50 f6 e9 2d fe ff ff 48 89 df e8 de
[  341.227509] RSP: 0018:ffff88011086f408 EFLAGS: 00010202
[  341.227509] RAX: dffffc0000000000 RBX: 1ffff1002210de85 RCX: 0000000000000000
[  341.227509] RDX: 1ffff1002210de85 RSI: ffff880110813be8 RDI: ffffed002210de58
[  341.227509] RBP: ffff88011086f4d0 R08: 0000000000000000 R09: 0000000000000000
[  341.227509] R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff1002210de81
[  341.227509] R13: ffff880110625a48 R14: ffff880114cec8c8 R15: 0000000000000014
[  341.227509] FS:  0000000000000000(0000) GS:ffff880116600000(0000) knlGS:0000000000000000
[  341.227509] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  341.227509] CR2: 00007f11fd38e000 CR3: 000000013ca16000 CR4: 00000000001006e0
[  341.227509] Call Trace:
[  341.227509]  ? __clusterip_config_find+0x460/0x460 [ipt_CLUSTERIP]
[  341.227509]  ? default_device_exit+0x1ca/0x270
[  341.227509]  ? remove_proc_entry+0x1cd/0x390
[  341.227509]  ? dev_change_net_namespace+0xd00/0xd00
[  341.227509]  ? __init_waitqueue_head+0x130/0x130
[  341.227509]  ops_exit_list.isra.10+0x94/0x140
[  341.227509]  cleanup_net+0x45b/0x900
[ ... ]

Fixes: 613d0776d3 ("netfilter: exit_net cleanup check added")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-18 01:18:09 +01:00
Taehee Yoo 5a86d68bcf netfilter: ipt_CLUSTERIP: fix deadlock in netns exit routine
When network namespace is destroyed, cleanup_net() is called.
cleanup_net() holds pernet_ops_rwsem then calls each ->exit callback.
So that clusterip_tg_destroy() is called by cleanup_net().
And clusterip_tg_destroy() calls unregister_netdevice_notifier().

But both cleanup_net() and clusterip_tg_destroy() hold same
lock(pernet_ops_rwsem). hence deadlock occurrs.

After this patch, only 1 notifier is registered when module is inserted.
And all of configs are added to per-net list.

test commands:
   %ip netns add vm1
   %ip netns exec vm1 bash
   %ip link set lo up
   %iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \
	-j CLUSTERIP --new --hashmode sourceip \
	--clustermac 01:00:5e:00:00:20 --total-nodes 2 --local-node 1
   %exit
   %ip netns del vm1

splat looks like:
[  341.809674] ============================================
[  341.809674] WARNING: possible recursive locking detected
[  341.809674] 4.19.0-rc5+ #16 Tainted: G        W
[  341.809674] --------------------------------------------
[  341.809674] kworker/u4:2/87 is trying to acquire lock:
[  341.809674] 000000005da2d519 (pernet_ops_rwsem){++++}, at: unregister_netdevice_notifier+0x8c/0x460
[  341.809674]
[  341.809674] but task is already holding lock:
[  341.809674] 000000005da2d519 (pernet_ops_rwsem){++++}, at: cleanup_net+0x119/0x900
[  341.809674]
[  341.809674] other info that might help us debug this:
[  341.809674]  Possible unsafe locking scenario:
[  341.809674]
[  341.809674]        CPU0
[  341.809674]        ----
[  341.809674]   lock(pernet_ops_rwsem);
[  341.809674]   lock(pernet_ops_rwsem);
[  341.809674]
[  341.809674]  *** DEADLOCK ***
[  341.809674]
[  341.809674]  May be due to missing lock nesting notation
[  341.809674]
[  341.809674] 3 locks held by kworker/u4:2/87:
[  341.809674]  #0: 00000000d9df6c92 ((wq_completion)"%s""netns"){+.+.}, at: process_one_work+0xafe/0x1de0
[  341.809674]  #1: 00000000c2cbcee2 (net_cleanup_work){+.+.}, at: process_one_work+0xb60/0x1de0
[  341.809674]  #2: 000000005da2d519 (pernet_ops_rwsem){++++}, at: cleanup_net+0x119/0x900
[  341.809674]
[  341.809674] stack backtrace:
[  341.809674] CPU: 1 PID: 87 Comm: kworker/u4:2 Tainted: G        W         4.19.0-rc5+ #16
[  341.809674] Workqueue: netns cleanup_net
[  341.809674] Call Trace:
[ ... ]
[  342.070196]  down_write+0x93/0x160
[  342.070196]  ? unregister_netdevice_notifier+0x8c/0x460
[  342.070196]  ? down_read+0x1e0/0x1e0
[  342.070196]  ? sched_clock_cpu+0x126/0x170
[  342.070196]  ? find_held_lock+0x39/0x1c0
[  342.070196]  unregister_netdevice_notifier+0x8c/0x460
[  342.070196]  ? register_netdevice_notifier+0x790/0x790
[  342.070196]  ? __local_bh_enable_ip+0xe9/0x1b0
[  342.070196]  ? __local_bh_enable_ip+0xe9/0x1b0
[  342.070196]  ? clusterip_tg_destroy+0x372/0x650 [ipt_CLUSTERIP]
[  342.070196]  ? trace_hardirqs_on+0x93/0x210
[  342.070196]  ? __bpf_trace_preemptirq_template+0x10/0x10
[  342.070196]  ? clusterip_tg_destroy+0x372/0x650 [ipt_CLUSTERIP]
[  342.123094]  clusterip_tg_destroy+0x3ad/0x650 [ipt_CLUSTERIP]
[  342.123094]  ? clusterip_net_init+0x3d0/0x3d0 [ipt_CLUSTERIP]
[  342.123094]  ? cleanup_match+0x17d/0x200 [ip_tables]
[  342.123094]  ? xt_unregister_table+0x215/0x300 [x_tables]
[  342.123094]  ? kfree+0xe2/0x2a0
[  342.123094]  cleanup_entry+0x1d5/0x2f0 [ip_tables]
[  342.123094]  ? cleanup_match+0x200/0x200 [ip_tables]
[  342.123094]  __ipt_unregister_table+0x9b/0x1a0 [ip_tables]
[  342.123094]  iptable_filter_net_exit+0x43/0x80 [iptable_filter]
[  342.123094]  ops_exit_list.isra.10+0x94/0x140
[  342.123094]  cleanup_net+0x45b/0x900
[ ... ]

Fixes: 202f59afd4 ("netfilter: ipt_CLUSTERIP: do not hold dev")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-18 01:17:59 +01:00
Florian Westphal 5cbabeec1e netfilter: nat: remove nf_nat_l4proto struct
This removes the (now empty) nf_nat_l4proto struct, all its instances
and all the no longer needed runtime (un)register functionality.

nf_nat_need_gre() can be axed as well: the module that calls it (to
load the no-longer-existing nat_gre module) also calls other nat core
functions. GRE nat is now always available if kernel is built with it.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:33:31 +01:00
Florian Westphal faec18dbb0 netfilter: nat: remove l4proto->manip_pkt
This removes the last l4proto indirection, the two callers, the l3proto
packet mangling helpers for ipv4 and ipv6, now call the
nf_nat_l4proto_manip_pkt() helper.

nf_nat_proto_{dccp,tcp,sctp,gre,icmp,icmpv6} are left behind, even though
they contain no functionality anymore to not clutter this patch.

Next patch will remove the empty files and the nf_nat_l4proto
struct.

nf_nat_proto_udp.c is renamed to nf_nat_proto.c, as it now contains the
other nat manip functionality as well, not just udp and udplite.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:33:29 +01:00
Florian Westphal 76b90019e0 netfilter: nat: remove l4proto->nlattr_to_range
all protocols did set this to nf_nat_l4proto_nlattr_to_range, so
just call it directly.

The important difference is that we'll now also call it for
protocols that we don't support (i.e., nf_nat_proto_unknown did
not provide .nlattr_to_range).

However, there should be no harm, even icmp provided this callback.
If we don't implement a specific l4nat for this, nothing would make
use of this information, so adding a big switch/case construct listing
all supported l4protocols seems a bit pointless.

This change leaves a single function pointer in the l4proto struct.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:33:23 +01:00
Florian Westphal fe2d002099 netfilter: nat: remove l4proto->in_range
With exception of icmp, all of the l4 nat protocols set this to
nf_nat_l4proto_in_range.

Get rid of this and just check the l4proto in the caller.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:33:14 +01:00
Florian Westphal 40e786bd29 netfilter: nat: fold in_range indirection into caller
No need for indirections here, we only support ipv4 and ipv6
and the called functions are very small.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:33:09 +01:00
Florian Westphal 203f2e7820 netfilter: nat: remove l4proto->unique_tuple
fold remaining users (icmp, icmpv6, gre) into nf_nat_l4proto_unique_tuple.
The static-save of old incarnation of resolved key in gre and icmp is
removed as well, just use the prandom based offset like the others.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:33:04 +01:00
Florian Westphal 912da924a2 netfilter: remove NF_NAT_RANGE_PROTO_RANDOM support
Historically this was net_random() based, and was then converted to
a hash based algorithm (private boot seed + hash of endpoint addresses)
due to concerns of leaking net_random() bits.

RANDOM_FULLY mode was added later to avoid problems with hash
based mode (see commit 34ce324019,
"netfilter: nf_nat: add full port randomization support" for details).

Just make prandom_u32() the default search starting point and get rid of
->secure_port() altogether.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:32:36 +01:00
Eric Dumazet 8203e2d844 net: clear skb->tstamp in forwarding paths
Sergey reported that forwarding was no longer working
if fq packet scheduler was used.

This is caused by the recent switch to EDT model, since incoming
packets might have been timestamped by __net_timestamp()

__net_timestamp() uses ktime_get_real(), while fq expects packets
using CLOCK_MONOTONIC base.

The fix is to clear skb->tstamp in forwarding paths.

Fixes: 80b14dee2b ("net: Add a new socket option for a future transmit time.")
Fixes: fb420d5d91 ("tcp/fq: move back to CLOCK_MONOTONIC")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Sergey Matyukevich <geomatsi@gmail.com>
Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15 13:24:21 -08:00
Paolo Abeni 4f24ed77de udp: use indirect call wrappers for GRO socket lookup
This avoids another indirect call for UDP GRO. Again, the test
for the IPv6 variant is performed first.

v1 -> v2:
 - adapted to INDIRECT_CALL_ changes

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15 13:23:02 -08:00
Paolo Abeni 028e0a4766 net: use indirect call wrappers at GRO transport layer
This avoids an indirect call in the receive path for TCP and UDP
packets. TCP takes precedence on UDP, so that we have a single
additional conditional in the common case.

When IPV6 is build as module, all gro symbols except UDPv6 are
builtin, while the latter belong to the ipv6 module, so we
need some special care.

v1 -> v2:
 - adapted to INDIRECT_CALL_ changes
v2 -> v3:
 - fix build issue with CONFIG_IPV6=m

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15 13:23:02 -08:00
Michal Kubecek ade446403b net: ipv4: do not handle duplicate fragments as overlapping
Since commit 7969e5c40d ("ip: discard IPv4 datagrams with overlapping
segments.") IPv4 reassembly code drops the whole queue whenever an
overlapping fragment is received. However, the test is written in a way
which detects duplicate fragments as overlapping so that in environments
with many duplicate packets, fragmented packets may be undeliverable.

Add an extra test and for (potentially) duplicate fragment, only drop the
new fragment rather than the whole queue. Only starting offset and length
are checked, not the contents of the fragments as that would be too
expensive. For similar reason, linear list ("run") of a rbtree node is not
iterated, we only check if the new fragment is a subset of the interval
covered by existing consecutive fragments.

v2: instead of an exact check iterating through linear list of an rbtree
node, only check if the new fragment is subset of the "run" (suggested
by Eric Dumazet)

Fixes: 7969e5c40d ("ip: discard IPv4 datagrams with overlapping segments.")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15 11:50:40 -08:00
Yangtao Li 70f98d7c7d ipconfig: convert to DEFINE_SHOW_ATTRIBUTE
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15 11:21:22 -08:00
Peter Oskolkov d9fbc7f643 net: tcp: prefer listeners bound to an address
A relatively common use case is to have several IPs configured
on a host, and have different listeners for each of them. We would
like to add a "catch all" listener on addr_any, to match incoming
connections not served by any of the listeners bound to a specific
address.

However, port-only lookups can match addr_any sockets when sockets
listening on specific addresses are present if so_reuseport flag
is set. This patch eliminates lookups into port-only hashtable,
as lookups by (addr,port) tuple are easily available.

In addition, compute_score() is tweaked to _not_ match
addr_any sockets to specific addresses, as hash collisions
could result in the unwanted behavior described above.

Tested: the patch compiles; full test in the last patch in this
patchset. Existing reuseport_* selftests also pass.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-14 15:55:20 -08:00
Peter Oskolkov 4cdeeee925 net: udp: prefer listeners bound to an address
A relatively common use case is to have several IPs configured
on a host, and have different listeners for each of them. We would
like to add a "catch all" listener on addr_any, to match incoming
connections not served by any of the listeners bound to a specific
address.

However, port-only lookups can match addr_any sockets when sockets
listening on specific addresses are present if so_reuseport flag
is set. This patch eliminates lookups into port-only hashtable,
as lookups by (addr,port) tuple are easily available.

In addition, compute_score() is tweaked to _not_ match
addr_any sockets to specific addresses, as hash collisions
could result in the unwanted behavior described above.

Tested: the patch compiles; full test in the last patch in this
patchset. Existing reuseport_* selftests also pass.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-14 15:55:20 -08:00
Dave Taht 65cab850f0 net: Allow class-e address assignment via ifconfig ioctl
While most distributions long ago switched to the iproute2 suite
of utilities, which allow class-e (240.0.0.0/4) address assignment,
distributions relying on busybox, toybox and other forms of
ifconfig cannot assign class-e addresses without this kernel patch.

While CIDR has been obsolete for 2 decades, and a survey of all the
open source code in the world shows the IN_whatever macros are also
obsolete... rather than obsolete CIDR from this ioctl entirely, this
patch merely enables class-e assignment, sanely.

Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-14 15:39:31 -08:00
Oz Shlomo 0621e6fc5e net: Add netif_is_gretap()/netif_is_ip6gretap()
Changed the is_gretap_dev and is_ip6gretap_dev logic from structure
comparison to string comparison of the rtnl_link_ops kind field.

This approach aligns with the current identification methods and function
names of vxlan and geneve network devices.

Convert mlxsw to use these helpers and use them in downstream mlx5 patch.

Signed-off-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-10 15:53:04 -08:00
Gustavo A. R. Silva 5648451e30 ipv4: Fix potential Spectre v1 vulnerability
vr.vifi is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

net/ipv4/ipmr.c:1616 ipmr_ioctl() warn: potential spectre issue 'mrt->vif_table' [r] (local cap)
net/ipv4/ipmr.c:1690 ipmr_compat_ioctl() warn: potential spectre issue 'mrt->vif_table' [r] (local cap)

Fix this by sanitizing vr.vifi before using it to index mrt->vif_table'

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10 12:10:38 -08:00
Eric Dumazet d8ed257f31 tcp: handle EOR and FIN conditions the same in tcp_tso_should_defer()
In commit f9bfe4e6a9 ("tcp: lack of available data can also cause
TSO defer") we moved the test in tcp_tso_should_defer() for packets
with a FIN flag, and we mentioned that the same would be done
later for EOR flag.

Both flags should be handled at the same time, after all other
heuristics have been considered. They both mean that no more bytes
can be added to this skb by an application.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10 12:09:15 -08:00
David S. Miller 4cc1feeb6f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Several conflicts, seemingly all over the place.

I used Stephen Rothwell's sample resolutions for many of these, if not
just to double check my own work, so definitely the credit largely
goes to him.

The NFP conflict consisted of a bug fix (moving operations
past the rhashtable operation) while chaning the initial
argument in the function call in the moved code.

The net/dsa/master.c conflict had to do with a bug fix intermixing of
making dsa_master_set_mtu() static with the fixing of the tagging
attribute location.

cls_flower had a conflict because the dup reject fix from Or
overlapped with the addition of port range classifiction.

__set_phy_supported()'s conflict was relatively easy to resolve
because Andrew fixed it in both trees, so it was just a matter
of taking the net-next copy.  Or at least I think it was :-)

Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup()
intermixed with changes on how the sdif and caller_net are calculated
in these code paths in net-next.

The remaining BPF conflicts were largely about the addition of the
__bpf_md_ptr stuff in 'net' overlapping with adjustments and additions
to the relevant data structure where the MD pointer macros are used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-09 21:43:31 -08:00
Willem de Bruijn 97ef7b4c55 ip: silence udp zerocopy smatch false positive
extra_uref is used in __ip(6)_append_data only if uarg is set.

Smatch sees that the variable is passed to sock_zerocopy_put_abort.
This function accesses it only when uarg is set, but smatch cannot
infer this.

Make this dependency explicit.

Fixes: 52900d2228 ("udp: elide zerocopy operation in hot path")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-08 12:26:20 -08:00
Eric Dumazet f9bfe4e6a9 tcp: lack of available data can also cause TSO defer
tcp_tso_should_defer() can return true in three different cases :

 1) We are cwnd-limited
 2) We are rwnd-limited
 3) We are application limited.

Neal pointed out that my recent fix went too far, since
it assumed that if we were not in 1) case, we must be rwnd-limited

Fix this by properly populating the is_cwnd_limited and
is_rwnd_limited booleans.

After this change, we can finally move the silly check for FIN
flag only for the application-limited case.

The same move for EOR bit will be handled in net-next,
since commit 1c09f7d073 ("tcp: do not try to defer skbs
with eor mark (MSG_EOR)") is scheduled for linux-4.21

Tested by running 200 concurrent netperf -t TCP_RR -- -r 60000,100
and checking none of them was rwnd_limited in the chrono_stat
output from "ss -ti" command.

Fixes: 41727549de ("tcp: Do not underestimate rwnd_limited")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07 16:18:22 -08:00
Petr Machata 567c5e13be net: core: dev: Add extack argument to dev_change_flags()
In order to pass extack together with NETDEV_PRE_UP notifications, it's
necessary to route the extack to __dev_open() from diverse (possibly
indirect) callers. One prominent API through which the notification is
invoked is dev_change_flags().

Therefore extend dev_change_flags() with and extra extack argument and
update all users. Most of the calls end up just encoding NULL, but
several sites (VLAN, ipvlan, VRF, rtnetlink) do have extack available.

Since the function declaration line is changed anyway, name the other
function arguments to placate checkpatch.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-06 13:26:07 -08:00
Petr Machata 00f54e6892 net: core: dev: Add extack argument to dev_open()
In order to pass extack together with NETDEV_PRE_UP notifications, it's
necessary to route the extack to __dev_open() from diverse (possibly
indirect) callers. One prominent API through which the notification is
invoked is dev_open().

Therefore extend dev_open() with and extra extack argument and update
all users. Most of the calls end up just encoding NULL, but bond and
team drivers have the extack readily available.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-06 13:26:06 -08:00