This patch fixes overflow when do cat /sys/kernel/debug/f2fs/status.
If a section is relatively large, dist value can be overflowed.
Reported-by: Yossi Goldfill <ygoldfill@radianmemory.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now, FALLOC_FL_ZERO_RANGE flag in ->fallocate is supported in ext4/xfs.
In commit, the semantics of this flag is descripted as following:"
1) Make sure that both offset and len are block size aligned.
2) Update the i_size of inode by len bytes.
3) Compute the file's logical block number against offset. If the computed
block number is not the starting block of the extent, split the extent
such that the block number is the starting block of the extent.
4) Shift all the extents which are lying between
[offset, last allocated extent] towards right by len bytes. This step
will make a hole of len bytes at offset."
This patch implements fallocate's FALLOC_FL_ZERO_RANGE for f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now, FALLOC_FL_COLLAPSE_RANGE flag in ->fallocate is supported in ext4/xfs.
In commit, the semantics of this flag is descripted as following:"
1) It collapses the range lying between offset and length by removing any
data blocks which are present in this range and than updates all the
logical offsets of extents beyond "offset + len" to nullify the hole
created by removing blocks. In short, it does not leave a hole.
2) It should be used exclusively. No other fallocate flag in combination.
3) Offset and length supplied to fallocate should be fs block size aligned
in case of xfs and ext4.
4) Collaspe range does not work beyond i_size."
This patch implements fallocate's FALLOC_FL_COLLAPSE_RANGE for f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce a generic function replace_block base on recover_data_page,
and export it. So with it we can operate file's meta data which is in
CP/SSA area when we invoke fallocate with FALLOC_FL_COLLAPSE_RANGE
flag.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In set_node_addr, we try to lookup cached nat entry of inode and then
set flag in it.
But previously in this function, we have already grabbed nat entry with
current node id, if the node id is the same as the one of inode, we
do not need to lookup it in cache again.
So this patch adds condition judgment for reducing unneeded lookup.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Remove f2fs_make_empty() declaration, since the main body of this function
is move into do_make_empty_dir() and the function is obsolete now.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch determines to issue discard commands by comparing given minlen and
the length of produced final candidates.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a bitmap for discard issues from f2fs_trim_fs.
There-in rule is to issue discard commands only for invalidated blocks
after mount.
Once mount is done, f2fs_trim_fs trims out whole invalid area.
After ehn, it will not issue and discrads redundantly.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch removes spin_lock, since this is covered by f2fs_lock_op already.
And, we should avoid to use page operations inside spin_lock.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch splits find_data_page as follows.
1. f2fs_gc
- use get_read_data_page() with read only
2. find_in_level
- use find_data_page without locked page
3. truncate_partial_page
- In the case cache_only mode, just drop cached page.
- Ohterwise, use get_lock_data_page() and guarantee to truncate
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are two threads:
f2fs_delete_entry() get_new_data_page()
f2fs_reserve_block()
dn.blkaddr = XXX
lock_page(dentry_block)
truncate_hole()
dn.blkaddr = NULL
unlock_page(dentry_block)
lock_page(dentry_block)
fill the block from XXX address
add new dentries
unlock_page(dentry_block)
Later, f2fs_write_data_page() will truncate the dentry_block, since
its block address is NULL.
The reason for this was due to the wrong lock order.
In this case, we should do f2fs_reserve_block() after locking its dentry block.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds f2fs_sb_info and page pointers in f2fs_io_info structure.
With this change, we can reduce a lot of parameters for IO functions.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch implements f2fs_mpage_readpages for further optimization on
encryption support.
The basic code was taken from fs/mpage.c, and changed to be simple by adjusting
that block_size is equal to page_size in f2fs.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
a) instead of storing the symlink body (via nd_set_link()) and returning
an opaque pointer later passed to ->put_link(), ->follow_link() _stores_
that opaque pointer (into void * passed by address by caller) and returns
the symlink body. Returning ERR_PTR() on error, NULL on jump (procfs magic
symlinks) and pointer to symlink body for normal symlinks. Stored pointer
is ignored in all cases except the last one.
Storing NULL for opaque pointer (or not storing it at all) means no call
of ->put_link().
b) the body used to be passed to ->put_link() implicitly (via nameidata).
Now only the opaque pointer is. In the cases when we used the symlink body
to free stuff, ->follow_link() now should store it as opaque pointer in addition
to returning it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
has_fsynced_inode() has no other caller out of node.c, make it static.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In the punch_hole(), if offset bigger than inode size, it returns SUCCESS.
Then f2fs_fallocate() will update time and dirty mark.
In that case, inode has not been modified actually.
So I have added offset check routine that prevent to call the punch_hole().
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Export is_valid_blkaddr() and use it to replace some codes for readability.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Our f2fs_acl_create is copied from posix_acl_create in ./fs/posix_acl.c and
modified to avoid deadlock bug when inline_dentry feature is enabled.
Dan Carpenter rewrites posix_acl_create in commit 2799563b281f
("fs/posix_acl.c: make posix_acl_create() safer and cleaner") to make this
function more safer, so that we can avoid potential bug in its caller,
especially for ocfs2.
Let's back port the patch to f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The page_follow_link_light returns NULL and its error pointer was remained
in nd->path.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reports performance regression by Yuanhan Liu.
The basic idea was to reduce one-point mutex, but it turns out this causes
another contention like context swithes.
https://lkml.org/lkml/2015/4/21/11
Until finishing the analysis on this issue, I'd like to revert this for a while.
This reverts commit 78373b7319.
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
Pull f2fs updates from Jaegeuk Kim:
"New features:
- in-memory extent_cache
- fs_shutdown to test power-off-recovery
- use inline_data to store symlink path
- show f2fs as a non-misc filesystem
Major fixes:
- avoid CPU stalls on sync_dirty_dir_inodes
- fix some power-off-recovery procedure
- fix handling of broken symlink correctly
- fix missing dot and dotdot made by sudden power cuts
- handle wrong data index during roll-forward recovery
- preallocate data blocks for direct_io
... and a bunch of minor bug fixes and cleanups"
* tag 'for-f2fs-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (71 commits)
f2fs: pass checkpoint reason on roll-forward recovery
f2fs: avoid abnormal behavior on broken symlink
f2fs: flush symlink path to avoid broken symlink after POR
f2fs: change 0 to false for bool type
f2fs: do not recover wrong data index
f2fs: do not increase link count during recovery
f2fs: assign parent's i_mode for empty dir
f2fs: add F2FS_INLINE_DOTS to recover missing dot dentries
f2fs: fix mismatching lock and unlock pages for roll-forward recovery
f2fs: fix sparse warnings
f2fs: limit b_size of mapped bh in f2fs_map_bh
f2fs: persist system.advise into on-disk inode
f2fs: avoid NULL pointer dereference in f2fs_xattr_advise_get
f2fs: preallocate fallocated blocks for direct IO
f2fs: enable inline data by default
f2fs: preserve extent info for extent cache
f2fs: initialize extent tree with on-disk extent info of inode
f2fs: introduce __{find,grab}_extent_tree
f2fs: split set_data_blkaddr from f2fs_update_extent_cache
f2fs: enable fast symlink by utilizing inline data
...
This patch adds CP_RECOVERY to remain recovery information for checkpoint.
And, it makes sure writing checkpoint in this case.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When f2fs_symlink was triggered and checkpoint was done before syncing its
link path, f2fs can get broken symlink like "xxx -> \0\0\0".
This incurs abnormal path_walk by VFS.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to avoid broken symlink case after POR in best effort.
This results in performance regression.
But, if f2fs has inline_data and the target path is under 3KB-sized long,
the page would be stored in its inode_block, so that there would be no
performance regression.
Note that, if user wants to keep this file atomically, it needs to trigger
dir->fsync.
And, there is still a hole to produce broken symlink.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
in the f2fs_fill_super function, variable "retry" is bool type
i think that it should be set as false.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The rw parameter to direct_IO is redundant with iov_iter->type, and
treated slightly differently just about everywhere it's used: some users
do rw & WRITE, and others do rw == WRITE where they should be doing a
bitwise check. Simplify this with the new iov_iter_rw() helper, which
always returns either READ or WRITE.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Most filesystems call through to these at some point, so we'll start
here.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All places outside of core VFS that checked ->read and ->write for being NULL or
called the methods directly are gone now, so NULL {read,write} with non-NULL
{read,write}_iter will do the right thing in all cases.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
During the roll-forward recovery, if we found a new data index written fsync
lastly, we need to recover new block address.
But, if that address was corrupted, we should not recover that.
Otherwise, f2fs gets kernel panic from:
In check_index_in_prev_nodes(),
sentry = get_seg_entry(sbi, segno);
--------------------------> out-of-range segno.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If there are multiple fsynced dnodes having a dent flag, roll-forward routine
sets FI_INC_LINK for their inode, and recovery_dentry increases its link count
accordingly.
That results in normal file having a link count as 2, so we can't unlink those
files.
This was added to handle several inode blocks having same inode number with
different directory paths.
But, current f2fs doesn't replay all of path changes and only recover its dentry
for the last fsynced inode block.
So, there is no reason to do this.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If f2fs was corrupted with missing dot dentries, it needs to recover them after
fsck.f2fs detection.
The underlying precedure is:
1. The fsck.f2fs remains F2FS_INLINE_DOTS flag in directory inode, if it detects
missing dot dentries.
2. When f2fs looks up the corrupted directory, it triggers f2fs_add_link with
proper inode numbers and their dot and dotdot names.
3. Once f2fs recovers the directory without errors, it removes F2FS_INLINE_DOTS
finally.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes the below warning.
sparse warnings: (new ones prefixed by >>)
>> fs/f2fs/inode.c:56:23: sparse: restricted __le32 degrades to integer
>> fs/f2fs/inode.c:56:52: sparse: restricted __le32 degrades to integer
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Map bh over max size which caller defined is not needed, limit it in
f2fs_map_bh.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to dirty inode for persisting i_advise of f2fs inode info into
on-disk inode if user sets system.advise through setxattr. Otherwise the new
value will be lost.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Normally, due to DIO_SKIP_HOLES flag is set by default, blockdev_direct_IO in
f2fs_direct_IO tries to skip DIO in holes when writing inside i_size, this
makes us falling back to buffered IO which shows lower performance.
So in commit 59b802e5a4 ("f2fs: allocate data blocks in advance for
f2fs_direct_IO"), we improve perfromance by allocating data blocks in advance
if we meet holes no matter in i_size or not, since with it we can avoid falling
back to buffered IO.
But we forget to consider for unwritten fallocated block in this commit.
This patch tries to fix it for fallocate case, this helps to improve
performance.
Test result:
Storage info: sandisk ultra 64G micro sd card.
touch /mnt/f2fs/file
truncate -s 67108864 /mnt/f2fs/file
fallocate -o 0 -l 67108864 /mnt/f2fs/file
time dd if=/dev/zero of=/mnt/f2fs/file bs=1M count=64 conv=notrunc oflag=direct
Time before applying the patch:
67108864 bytes (67 MB) copied, 36.16 s, 1.9 MB/s
real 0m36.162s
user 0m0.000s
sys 0m0.180s
Time after applying the patch:
67108864 bytes (67 MB) copied, 27.7776 s, 2.4 MB/s
real 0m27.780s
user 0m0.000s
sys 0m0.036s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Enable inline_data feature by default since it brings us better
performance and space utilization and now has already stable.
Add another option noinline_data to disable it during mount.
Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Suggested-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to preserve last extent info in extent tree cache into on-disk
inode, so this can help us to reuse the last extent info next time for
performance.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With normal extent info cache, we records largest extent mapping between logical
block and physical block into extent info, and we persist extent info in on-disk
inode.
When we enable extent tree cache, if extent info of on-disk inode is exist, and
the extent is not a small fragmented mapping extent. We'd better to load the
extent info into extent tree cache when inode is loaded. By this way we can have
more chance to hit extent tree cache rather than taking more time to read dnode
page for block address.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces __{find,grab}_extent_tree for reusing by following
patches.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Split __set_data_blkaddr from f2fs_update_extent_cache for readability.
Additionally rename __set_data_blkaddr to set_data_blkaddr for exporting.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fast symlink can utilize inline data flow to avoid using any
i_addr region, since we need to handle many cases such as
truncation, roll-forward recovery, and fsck/dump tools.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch is to avoid some punch_hole overhead when releasing volatile data.
If volatile data was not written yet, we just can make the first page as zero.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch removes wrong f2fs_bug_on in truncate_inline_inode.
When there is no space, it can happen a corner case where i_isze is over
MAX_INLINE_SIZE while its inode is still inline_data.
The scenario is
1. write small data into file #A.
2. fill the whole partition to 100%.
3. truncate 4096 on file #A.
4. write data at 8192 offset.
--> f2fs_write_begin
-> -ENOSPC = f2fs_convert_inline_page
-> f2fs_write_failed
-> truncate_blocks
-> truncate_inline_inode
BUG_ON, since i_size is 4096.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, f2fs_write_data_pages has a mutex, sbi->writepages, to serialize
data writes to maximize write bandwidth, while sacrificing multi-threads
performance.
Practically, however, multi-threads environment is much more important for
users. So this patch tries to remove the mutex.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch modifies to call set_buffer_new, if new blocks are allocated.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to set SBI_NEED_FSCK flag into sbi only when we fail to recover
in fill_super, so we could skip fscking image when we fail to fill super for
other reason.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In the following call stack, f2fs changes the bitmap for dirty segments and # of
dirty sentries without grabbing sit_i->sentry_lock.
This can result in mismatch on bitmap and # of dirty sentries, since if there
are some direct_io operations.
In allocate_data_block,
- __allocate_new_segments
- mutex_lock(&curseg->curseg_mutex);
- s_ops->allocate_segment
- new_curseg/change_curseg
- reset_curseg
- __set_sit_entry_type
- __mark_sit_entry_dirty
- set_bit(dirty_sentries_bitmap)
- dirty_sentries++;
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In __allocate_data_blocks, we should check current blkaddr which is located at
ofs_in_node of dnode page instead of checking first blkaddr all the time.
Otherwise we can only allocate one blkaddr in each dnode page. Fix it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously if inode is with inline data, we will try to invalid partial inline
data in page #0 when we truncate size of inode in truncate_partial_data_page().
And then we set page #0 to dirty, after this we can synchronize inode page with
page #0 at ->writepage().
But sometimes we will fail to operate page #0 in truncate_partial_data_page()
due to below reason:
a) if offset is zero, we will skip setting page #0 to dirty.
b) if page #0 is not uptodate, we will fail to update it as it has no mapping
data.
So with following operations, we will meet recent data which should be
truncated.
1.write inline data to file
2.sync first data page to inode page
3.truncate file size to 0
4.truncate file size to max_inline_size
5.echo 1 > /proc/sys/vm/drop_caches
6.read file --> meet original inline data which is remained in inode page.
This patch renames truncate_inline_data() to truncate_inline_inode() for code
readability, then use truncate_inline_inode() to truncate inline data in inode
page in truncate_blocks() and truncate page #0 in truncate_partial_data_page()
for fixing.
v2:
o truncate partially #0 page in truncate_partial_data_page to avoid keeping
old data in #0 page.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Our f2fs_acl_create is copied and modified from posix_acl_create to avoid
deadlock bug when inline_dentry feature is enabled.
Now, we got reference leaks in posix_acl_create, and this has been fixed in
commit fed0b588be ("posix_acl: fix reference leaks in posix_acl_create")
by Omar Sandoval.
https://lkml.org/lkml/2015/2/9/5
Let's fix this issue in f2fs_acl_create too.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Reviewed-by: Changman Lee <cm224.lee@ssamsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When lookuping for creating, we will try to record the level of current dentry
hash table if current dentry has enough contiguous slots for storing name of new
file which will be created later, this can save our lookup time when add a link
into parent dir.
But currently in find_target_dentry, our current length of contiguous free slots
is not calculated correctly. This make us leaving some holes in dentry block
occasionally, it wastes our space of dentry block.
Let's refactor the lookup flow for max slots as following to fix this issue:
a) increase max_len if current slot is free;
b) update max_slots with max_len if max_len is larger than max_slots;
c) reset max_len to zero if current slot is not free.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
nm_i->nat_tree_lock is used to sync both the operations of nat entry
cache tree and nat set cache tree, however, it isn't held when flush
nat entries during checkpoint which lead to potential race, this patch
fix it by holding the lock when gang lookup nat set cache and delete
item from nat set cache.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Through each macro, we can read the meaning easily.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Remove the unnecessary condition judgment, because
'max_slots' has been initialized to '0' at the beginging
of the function, as following:
if (max_slots)
*max_slots = 0;
Signed-off-by: Yuan Zhong <yuan.mark.zhong@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The function 'find_in_inline_dir()' contain 'res_page'
as an argument. So, we should initiaize 'res_page' before
this function.
Signed-off-by: Yuan Zhong <yuan.mark.zhong@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In __set_free we will check whether all segment are free in one section
when free one segment, in order to set section to free status. But the
searching region of segmap is from start segno to last segno of main
area, it's not necessary. So let's just only check all segment bitmap
of target section.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
extent tree/node slab cache is created during f2fs insmod,
how, it isn't destroyed during f2fs rmmod, this patch fix
it by destroy extent tree/node slab cache once rmmod f2fs.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The f2fs has been shipped on many smartphone devices during a couple of years.
So, it is worth to relocate Kconfig into main page from misc filesystems for
developers to choose it more easily.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If inode has inline_data, it should report -ENOENT when accessing out-of-bound
region.
This is used by f2fs_fiemap which treats -ENOENT with no error.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When fsync is done through checkpoint, previous f2fs missed to clear append
and update flag. This patch fixes to clear them.
This was originally catched by Changman Lee before.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch is for looking into gc performance of f2fs in detail.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: fix build errors]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now in f2fs, we share functions and structures for batch mode and real-time mode
discard. For real-time mode discard, in shared function add_discard_addrs, we
will use uninitialized trim_minlen in struct cp_control to compare with length
of contiguous free blocks to decide whether skipping discard fragmented freespace
or not, this makes us ignore small discard sometimes. Fix it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Reviewed-by : Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In a preempt-off enviroment a alot of FS activity (write/delete) I run
into a CPU stall:
| NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [kworker/u2:2:59]
| Modules linked in:
| CPU: 0 PID: 59 Comm: kworker/u2:2 Tainted: G W 3.19.0-00010-g10c11c51ffed #153
| Workqueue: writeback bdi_writeback_workfn (flush-179:0)
| task: df230000 ti: df23e000 task.ti: df23e000
| PC is at __submit_merged_bio+0x6c/0x110
| LR is at f2fs_submit_merged_bio+0x74/0x80
…
| [<c00085c4>] (gic_handle_irq) from [<c0012e84>] (__irq_svc+0x44/0x5c)
| Exception stack(0xdf23fb48 to 0xdf23fb90)
| fb40: deef3484 ffff0001 ffff0001 00000027 deef3484 00000000
| fb60: deef3440 00000000 de426000 deef34ec deefc440 df23fbb4 df23fbb8 df23fb90
| fb80: c02191f0 c0218fa0 60000013 ffffffff
| [<c0012e84>] (__irq_svc) from [<c0218fa0>] (__submit_merged_bio+0x6c/0x110)
| [<c0218fa0>] (__submit_merged_bio) from [<c02191f0>] (f2fs_submit_merged_bio+0x74/0x80)
| [<c02191f0>] (f2fs_submit_merged_bio) from [<c021624c>] (sync_dirty_dir_inodes+0x70/0x78)
| [<c021624c>] (sync_dirty_dir_inodes) from [<c0216358>] (write_checkpoint+0x104/0xc10)
| [<c0216358>] (write_checkpoint) from [<c021231c>] (f2fs_sync_fs+0x80/0xbc)
| [<c021231c>] (f2fs_sync_fs) from [<c0221eb8>] (f2fs_balance_fs_bg+0x4c/0x68)
| [<c0221eb8>] (f2fs_balance_fs_bg) from [<c021e9b8>] (f2fs_write_node_pages+0x40/0x110)
| [<c021e9b8>] (f2fs_write_node_pages) from [<c00de620>] (do_writepages+0x34/0x48)
| [<c00de620>] (do_writepages) from [<c0145714>] (__writeback_single_inode+0x50/0x228)
| [<c0145714>] (__writeback_single_inode) from [<c0146184>] (writeback_sb_inodes+0x1a8/0x378)
| [<c0146184>] (writeback_sb_inodes) from [<c01463e4>] (__writeback_inodes_wb+0x90/0xc8)
| [<c01463e4>] (__writeback_inodes_wb) from [<c01465f8>] (wb_writeback+0x1dc/0x28c)
| [<c01465f8>] (wb_writeback) from [<c0146dd8>] (bdi_writeback_workfn+0x2ac/0x460)
| [<c0146dd8>] (bdi_writeback_workfn) from [<c003c3fc>] (process_one_work+0x11c/0x3a4)
| [<c003c3fc>] (process_one_work) from [<c003c844>] (worker_thread+0x17c/0x490)
| [<c003c844>] (worker_thread) from [<c0041398>] (kthread+0xec/0x100)
| [<c0041398>] (kthread) from [<c000ed10>] (ret_from_fork+0x14/0x24)
As it turns out, the code loops in sync_dirty_dir_inodes() and waits for
others to make progress but since it never leaves the CPU there is no
progress made. At the time of this stall, there is also a rm process
blocked:
| rm R running 0 1989 1774 0x00000000
| [<c047c55c>] (__schedule) from [<c00486dc>] (__cond_resched+0x30/0x4c)
| [<c00486dc>] (__cond_resched) from [<c047c8c8>] (_cond_resched+0x4c/0x54)
| [<c047c8c8>] (_cond_resched) from [<c00e1aec>] (truncate_inode_pages_range+0x1f0/0x5e8)
| [<c00e1aec>] (truncate_inode_pages_range) from [<c00e1fd8>] (truncate_inode_pages+0x28/0x30)
| [<c00e1fd8>] (truncate_inode_pages) from [<c00e2148>] (truncate_inode_pages_final+0x60/0x64)
| [<c00e2148>] (truncate_inode_pages_final) from [<c020c92c>] (f2fs_evict_inode+0x4c/0x268)
| [<c020c92c>] (f2fs_evict_inode) from [<c0137214>] (evict+0x94/0x140)
| [<c0137214>] (evict) from [<c01377e8>] (iput+0xc8/0x134)
| [<c01377e8>] (iput) from [<c01333e4>] (d_delete+0x154/0x180)
| [<c01333e4>] (d_delete) from [<c0129870>] (vfs_rmdir+0x114/0x12c)
| [<c0129870>] (vfs_rmdir) from [<c012d644>] (do_rmdir+0x158/0x168)
| [<c012d644>] (do_rmdir) from [<c012dd90>] (SyS_unlinkat+0x30/0x3c)
| [<c012dd90>] (SyS_unlinkat) from [<c000ec40>] (ret_fast_syscall+0x0/0x4c)
As explained by Jaegeuk Kim:
|This inode is the directory (c.f., do_rmdir) causing a infinite loop on
|sync_dirty_dir_inodes.
|The sync_dirty_dir_inodes tries to flush dirty dentry pages, but if the
|inode is under eviction, it submits bios and do it again until eviction
|is finished.
This patch adds a cond_resched() (as suggested by Jaegeuk) after a BIO
is submitted so other thread can make progress.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[Jaegeuk Kim: change fs/f2fs to f2fs in subject as naming convention]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
cp_payload is introduced for sit bitmap to support large volume, and it is
just after the block of f2fs_checkpoint + nat bitmap, so the first segment
should include F2FS_CP_PACKS + NR_CURSEG_TYPE + cp_payload + orphan blocks.
However, current max orphan inodes calculation don't consider cp_payload,
this patch fix it by reducing the number of cp_payload from total blocks of
the first segment when calculate max orphan inodes.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don't need to collect dirty sit entries and flush sit journal to sit
entries when there's no dirty sit entries. This patch check dirty_sentries
earlier just like flush_nat_entries.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
block operations is used to flush all dirty node and dentry blocks in
the page cache and suspend ordinary writing activities, however, there
are some facts such like cp error or mount read-only etc which lead to
block operations can't be invoked. Current trace point print block_ops
start premature even if block_ops doesn't have opportunity to execute.
This patch fix it by move block_ops trace point just before block_ops.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If a page is cached but its block was deallocated, we don't need to make
the page dirty again by gc and truncate_partial_data_page.
In that case, it needs to check its block allocation all the time instead
of giving up-to-date page.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If page's on-disk block was deallocated, let's remove up-to-date flag to avoid
further access with wrong contents.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
cp_pack_start_sum is calculated in do_checkpoint and is equal to
cpu_to_le32(1 + cp_payload_blks + orphan_blocks). The number of
orphan inode blocks is take advantage of by recover_orphan_inodes
to readahead meta pages and recovery inodes. However, current codes
forget to reduce the number of cp payload blocks when calculate
the number of orphan inode blocks. This patch fix it.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a generic ioctl for fs shutdown, which was used by xfs.
If this shutdown is triggered, filesystem stops any further IOs according to the
following options.
1. FS_GOING_DOWN_FULLSYNC
: this will flush all the data and dentry blocks, and do checkpoint before
shutdown.
2. FS_GOING_DOWN_METASYNC
: this will do checkpoint before shutdown.
3. FS_GOING_DOWN_NOSYNC
: this will trigger shutdown as is.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
During the roll-forward recovery, -ENOENT for f2fs_iget can be skipped.
So, this error value should not be propagated.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We update extent cache for all user inode of f2fs including dir inode, so this
patch gives another chance to try to get physical address of page from extent
cache for dir inode.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch switch to check FI_NO_EXTENT in f2fs_{lookup,update}_extent_cache
instead of f2fs_{lookup,update}_extent_tree or {lookup,update}_extent_info.
No functionality modification in this patch.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a fast lookup path for rb-tree extent cache.
In this patch we add a recently accessed extent node pointer 'cached_en' in
extent tree. In lookup path of extent cache, we will firstly lookup the last
accessed extent node which cached_en points, if we do not hit in this node,
we will try to lookup extent node in rb-tree.
By this way we can avoid unnecessary slow lookup in rb-tree sometimes.
Note that, side-effect of this patch is that we will increase memory cost,
because we will store a pointer variable in each struct extent tree
additionally.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds trace for lookup/update/shrink/destroy ops in rb-tree extent cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch add and show stat info of total memory footprint for extent tree,node
in debugfs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch enables rb-tree based extent cache in f2fs.
When we mount with "-o extent_cache", f2fs will try to add recently accessed
page-block mappings into rb-tree based extent cache as much as possible, instead
of original one extent info cache.
By this way, f2fs can support more effective cache between dnode page cache and
disk. It will supply high hit ratio in the cache with fewer memory when dnode
page cache are reclaimed in environment of low memory.
Storage: Sandisk sd card 64g
1.append write file (offset: 0, size: 128M);
2.override write file (offset: 2M, size: 1M);
3.override write file (offset: 4M, size: 1M);
...
4.override write file (offset: 48M, size: 1M);
...
5.override write file (offset: 112M, size: 1M);
6.sync
7.echo 3 > /proc/sys/vm/drop_caches
8.read file (size:128M, unit: 4k, count: 32768)
(time dd if=/mnt/f2fs/128m bs=4k count=32768)
Extent Hit Ratio:
before patched
Hit Ratio 121 / 1071 1071 / 1071
Performance:
before patched
real 0m37.051s 0m35.556s
user 0m0.040s 0m0.026s
sys 0m2.990s 0m2.251s
Memory Cost:
before patched
Tree Count: 0 1 (size: 24 bytes)
Node Count: 0 45 (size: 1440 bytes)
v3:
o retest and given more details of test result.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a mount option 'extent_cache' in f2fs.
It is try to use a rb-tree based extent cache to cache more mapping information
with less memory if this option is set, otherwise we will use the original one
extent info cache.
Suggested-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds core functions including slab cache init function and
init/lookup/update/shrink/destroy function for rb-tree based extent cache.
Thank Jaegeuk Kim and Changman Lee as they gave much suggestion about detail
design and implementation of extent cache.
Todo:
* register rb-based extent cache shrink with mm shrink interface.
v2:
o move set_extent_info and __is_{extent,back,front}_mergeable into f2fs.h.
o introduce __{attach,detach}_extent_node for code readability.
o add cond_resched() when fail to invoke kmem_cache_alloc/radix_tree_insert.
o fix some coding style and typo issues.
v3:
o fix oops due to using an unassigned pointer.
o use list_del to remove extent node in shrink list.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: add static for some funcitons and declare in f2fs.h]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce infra macro and data structure for rb-tree based extent cache:
Macros:
* EXT_TREE_VEC_SIZE: indicate vector size for gang lookup in extent tree.
* F2FS_MIN_EXTENT_LEN: indicate minimum length of extent managed in cache.
* EXTENT_CACHE_SHRINK_NUMBER: indicate number of extent in cache will be shrunk.
Basic data structures for extent cache:
* struct extent_tree: extent tree entry per inode.
* struct extent_node: extent info node linked in extent tree.
Besides, adding new extent cache related fields in f2fs_sb_info.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this patch, we do these jobs:
1. rename {check,update}_extent_cache to {lookup,update}_extent_info;
2. introduce universal lookup/update interface of extent cache:
f2fs_{lookup,update}_extent_cache including above two real functions, then
export them to function callers.
So after above cleanup, we can add new rb-tree based extent cache into exported
interfaces.
v2:
o remove "f2fs_" for inner function {lookup,update}_extent_info suggested by
Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces f2fs_map_bh to clean codes of check_extent_cache.
v2:
o cleanup f2fs_map_bh pointed out by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Rename a filed name from 'blk_addr' to 'blk' in struct {f2fs_extent,extent_info}
as annotation of this field descripts its meaning well to us.
By this way, we can avoid long statement in code of following patches.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Move ext_lock out of struct extent_info, then in the following patches we can
use variables with struct extent_info type as a parameter to pass pure data.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We should stat inline data information for temp file in f2fs_tmpfile if we
enable inline_data feature.
Otherwise, inline data stat number will be wrong after this temp file is
evicted.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch uses ->writepage of meta mapping in sync_meta_pages instead of
f2fs_write_meta_page, by this way, in its caller we can ignore any changes
(e.g. changing name) of this registered function.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces f2fs_update_dentry to remove redundant code in
f2fs_add_inline_entry and __f2fs_add_link.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
inline_dentry_addr is introduced with inline dentry feature without being used,
now we do not need to keep it for any reason, so remove it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull f2fs updates from Jaegeuk Kim:
"Major changes are to:
- add f2fs_io_tracer and F2FS_IOC_GETVERSION
- fix wrong acl assignment from parent
- fix accessing wrong data blocks
- fix wrong condition check for f2fs_sync_fs
- align start block address for direct_io
- add and refactor the readahead flows of FS metadata
- refactor atomic and volatile write policies
But most of patches are for clean-ups and minor bug fixes. Some of
them refactor old code too"
* tag 'for-f2fs-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (64 commits)
f2fs: use spinlock for segmap_lock instead of rwlock
f2fs: fix accessing wrong indexed data blocks
f2fs: avoid variable length array
f2fs: fix sparse warnings
f2fs: allocate data blocks in advance for f2fs_direct_IO
f2fs: introduce macros to convert bytes and blocks in f2fs
f2fs: call set_buffer_new for get_block
f2fs: check node page contents all the time
f2fs: avoid data offset overflow when lseeking huge file
f2fs: fix to use highmem for pages of newly created directory
f2fs: introduce a batched trim
f2fs: merge {invalidate,release}page for meta/node/data pages
f2fs: show the number of writeback pages in stat
f2fs: keep PagePrivate during releasepage
f2fs: should fail mount when trying to recover data on read-only dev
f2fs: split UMOUNT and FASTBOOT flags
f2fs: avoid write_checkpoint if f2fs is mounted readonly
f2fs: support norecovery mount option
f2fs: fix not to drop mount options when retrying fill_super
f2fs: merge flags in struct f2fs_sb_info
...
rwlock can provide better concurrency when there are much more readers than
writers because readers can hold the rwlock simultaneously.
But now, for segmap_lock rwlock in struct free_segmap_info, there is only one
reader 'mount' from below call path:
->f2fs_fill_super
->build_segment_manager
->build_dirty_segmap
->init_dirty_segmap
->find_next_inuse
read_lock
...
read_unlock
Now that our concurrency can not be improved since there is no other reader for
this lock, we do not need to use rwlock_t type for segmap_lock, let's replace it
with spinlock_t type.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes the following test.
This causes:
attempt to access beyond end of device
sdb2: rw=16384, want=14413962000, limit=16777216
The reason is:
- f2fs_write_begin
- f2fs_convert_inline_inode returns -ENOSPC
- f2fs_write_failed
- truncate_blocks
- truncate_partial_data_page
- find_data_page
- get_dnode_of_data returns wrong data index retrieved from inline_data
- f2fs_submit_page_bio(wrong data index)
- submit_bio(wrong data index)
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch resolves the following warnings.
include/trace/events/f2fs.h:150:1: warning: expression using sizeof bool
include/trace/events/f2fs.h:180:1: warning: expression using sizeof bool
include/trace/events/f2fs.h:990:1: warning: expression using sizeof bool
include/trace/events/f2fs.h:990:1: warning: expression using sizeof bool
include/trace/events/f2fs.h:150:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1)
include/trace/events/f2fs.h:180:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1)
include/trace/events/f2fs.h:990:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1)
include/trace/events/f2fs.h:990:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1)
fs/f2fs/checkpoint.c:27:19: warning: symbol 'inode_entry_slab' was not declared. Should it be static?
fs/f2fs/checkpoint.c:577:15: warning: cast to restricted __le32
fs/f2fs/checkpoint.c:592:15: warning: cast to restricted __le32
fs/f2fs/trace.c:19:1: warning: symbol 'pids' was not declared. Should it be static?
fs/f2fs/trace.c:21:21: warning: symbol 'last_io' was not declared. Should it be static?
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds two macros for transition between byte and block offsets.
Currently, f2fs only supports 4KB blocks, so use the default size for now.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes wrong handling of buffer_new flag in get_block.
If f2fs allocates new blocks and mapped buffer_head, it needs to set buffer_new
for the bh_result.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In get_node_page, if the page is up-to-date, we assumed that the page was not
reclaimed at all.
But, sometimes it was reported that its contents was missing.
So, just for sure, let's check its mapping and contents.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
xfstest generic/285 complains our issue in lseeking huge file.
Here is the detail output of generic/285:
"./check -f2fs tests/generic/285
Ran: generic/285
Failures: generic/285
Failed 1 of 1 tests
10. Test a huge file for offset overflow
10.01 SEEK_HOLE expected 65536 or 8589934592, got 65536. succ
10.02 SEEK_HOLE expected 65536 or 8589934592, got 65536. succ
10.03 SEEK_DATA expected 0 or 0, got 0. succ
10.04 SEEK_DATA expected 1 or 1, got 1. succ
10.05 SEEK_HOLE expected 8589934592 or 8589934592, got 0. FAIL
10.06 SEEK_DATA expected 8589869056 or 8589869056, got 8589869056. succ
10.07 SEEK_DATA expected 8589869057 or 8589869057, got 8589869057. succ
10.08 SEEK_DATA expected 8589869056 or 8589869056, got 4294901760. FAIL"
The reason of this issue is:
We will calculate current offset through left shifting page-offset with
PAGE_CACHE_SHIFT bits, but our page-offset is a type of unsigned long, its size
is 4 bytes in 32-bits machine.
So if our page-offset is bigger than (1 << 32 / pagesize - 1), result of left
shifting will overflow.
Let's fix this issue by casting type of page-offset to type of current offset:
loff_t.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In commit a78186ebe5 ("f2fs: use highmem for directory pages"), we have set
__GFP_HIGHMEM into dir mapping's gfp flag in f2fs_iget, so high address memory
could be used for these existing dir's page.
But we forgot to set flag for newly created dir, due to this reason, our newly
created dir pages could not be allocated from high address memory. Fix it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a batched trimming feature, which submits split discard
commands.
This is to avoid long latency due to huge trim commands.
If fstrim was triggered ranging from 0 to the end of device, we should lock
all the checkpoint-related mutexes, resulting in very long latency.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch merges ->{invalidate,release}page function for meta/node/data pages.
After this, duplication of codes could be removed.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If device is read-only, we should not proceed data recovery.
But, if the previous checkpoint was done by normal clean shutdown, it's safe to
proceed the recovery, since there will be no data to be recovered.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds FASTBOOT flag into checkpoint as follows.
- CP_UMOUNT_FLAG is set when system is umounted.
- CP_FASTBOOT_FLAG is set when intermediate checkpoint having node summaries
was done.
So, if you get CP_UMOUNT_FLAG from checkpoint, the system was umounted cleanly.
Instead, if there was sudden-power-off, you can get CP_FASTBOOT_FLAG or nothing.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Do not change any partition when f2fs is changed to readonly mode.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a mount option, norecovery, which is mostly same as
disable_roll_forward. The only difference is that norecovery should be activated
with read-only mount option.
This can be used when user wants to check whether f2fs is mountable or not
without any recovery process. (e.g., xfstests/200)
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If wrong mount option was requested, f2fs tries to fill_super again.
But, during the next trial, f2fs has no valid mount options, since
parse_options deleted all the separators in the original string.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently, there are several variables with Boolean type as below:
struct f2fs_sb_info {
...
int s_dirty;
bool need_fsck;
bool s_closing;
...
bool por_doing;
...
}
For this there are some issues:
1. there are some space of f2fs_sb_info is wasted due to aligning after Boolean
type variables by compiler.
2. if we continuously add new flag into f2fs_sb_info, structure will be messed
up.
So in this patch, we try to:
1. switch s_dirty to Boolean type variable since it has two status 0/1.
2. merge s_dirty/need_fsck/s_closing/por_doing variables into s_flag.
3. introduce an enum type which can indicate different states of sbi.
4. use new introduced universal interfaces is_sbi_flag_set/{set,clear}_sbi_flag
to operate flags for sbi.
After that, above issues will be fixed.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use pointer parameter @wait to pass result in {in,de}create_sleep_time for
cleanup.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
1. make truncate_inline_date static;
2. remove parameter @from of truncate_inline_date as callers only pass zero.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
No modification in functionality, just clean codes with f2fs_radix_tree_insert.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this patch we add the FS_IOC_GETVERSION ioctl for getting i_generation from
inode, after that, users can list file's generation number by using "lsattr -v".
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
During the recovery, any xattr blocks should not be found, since they are
written into cold log, not the warm node chain.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We will encounter deadloop in below scenario:
1. increase page count for F2FS_DIRTY_META type in following path:
->recover_fsync_data
->recover_data
->do_recover_data
->recover_data_page
->change_curseg
->write_sum_page
->set_page_dirty
2. fail in recover_data()
3. invalidate meta pages in truncate_inode_pages_final without decreasing page
count.
4. deadloop when sync_meta_pages as page count will always be non-zero.
message:
NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s!
[<c1129a37>] pagevec_lookup_tag+0x27/0x30
[<f0e774c7>] sync_meta_pages+0x87/0x160 [f2fs]
[<f0e86dd9>] recover_fsync_data+0xeb9/0xf10 [f2fs]
[<f0e75398>] f2fs_fill_super+0x888/0x980 [f2fs]
[<c11733ca>] mount_bdev+0x16a/0x1a0
[<f0e7180f>] f2fs_mount+0x1f/0x30 [f2fs]
[<c1173da6>] mount_fs+0x36/0x170
[<c118b6f5>] vfs_kern_mount+0x55/0xe0
[<c118d63f>] do_mount+0x1df/0x9f0
[<c118e110>] SyS_mount+0x70/0xb0
[<c15a0c48>] sysenter_do_call+0x12/0x12
To avoid page count leak, let's add ->invalidatepage and ->releasepage in
f2fs_meta_aops as f2fs_node_aops to release meta page count correctly.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If the previous checkpoint was done without CP_UMOUNT flag, it needs to do
checkpoint with CP_UMOUNT for the next fast boot.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to trigger checkpoint with umount flag when kill_sb was called.
In kill_sb, f2fs_sync_fs was finally called, but at this time, f2fs can't do
checkpoint with CP_UMOUNT.
After then, f2fs_put_super is not doing checkpoint, since it is not dirty.
So, this patch adds a flag to indicate f2fs_sync_fs is called during umount.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Our value of memory footprint statistics showed in debugfs is not calculated
correctly. Fix it in this patch.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If cp_error is set, we should avoid all the infinite loop.
In f2fs_sync_file, there is a hole, and this patch fixes that.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
fs/f2fs/trace.c:19:12: sparse: symbol 'pids_lock' was not declared. Should it be static?
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In the normal case, the radix_tree_nodes are freed successfully.
But, when cp_error was detected, we should destroy them forcefully.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We use kzalloc to allocate memory in __recover_inline_status, and use this
all-zero memory to check the inline date content of inode page by comparing
them. This is low effective and not needed, let's check inline date content
directly.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: make the code more neat]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch aligns the start block address of a file for direct io to the f2fs's
section size.
Some flash devices manage an over 4KB-sized page as a write unit, and if the
direct_io'ed data are written but not aligned to that unit, the performance can
be degraded due to the partial page copies.
Thus, since f2fs has a section that is well aligned to FTL units, we can align
the block address to the section size so that f2fs avoids this misalignment.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are two slab cache inode_entry_slab and winode_slab using the same
structure as below:
struct dir_inode_entry {
struct list_head list; /* list head */
struct inode *inode; /* vfs inode pointer */
};
struct inode_entry {
struct list_head list;
struct inode *inode;
};
It's a little waste that the two cache can not share their memory space for each
other.
So in this patch we remove one redundant winode_slab slab cache, then use more
universal name struct inode_entry as remaining data structure name of slab,
finally we reuse the inode_entry_slab to store dirty dir item and gc item for
more effective.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Cleanup parameters for trace_f2fs_submit_{read_,write_,page_,page_m}bio with fio
as one parameter.
Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds missing parameter _type_ for trace_f2fs_submit_page_bio, then
use DECLARE_EVENT_CLASS/DEFINE_EVENT_CONDITION pair to cleanup some trace event
code related to f2fs_submit_page_{m,}bio.
Additionally, after we remove redundant code, size of code can be reduced:
text data bss dec hex filename
176787 8712 56 185555 2d4d3 f2fs.ko.org
174408 8648 56 183112 2cb48 f2fs.ko
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In do_recover_data, we find and update previous node pages after updating
its new block addresses.
After then, we call fill_node_footer without reset field, we erase its
cold bit so that this new cold node block is written to wrong log area.
This patch fixes not to miss its old flag.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds block count by in-place-update in stat.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The __f2fs_add_link is covered by cp_rwsem all the time.
This calls init_inode_metadata, which conducts some acl operations including
memory allocation with GFP_KERNEL previously.
But, under memory pressure, f2fs_write_data_page can be called, which also
grabs cp_rwsem too.
In this case, this incurs a deadlock pointed by Chao.
Thread #1 Thread #2
down_read
down_write
down_read
-> here down_read should wait forever.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds two key functions to trace process ids and IOs.
The basic idea is to
1. remain process ids, pids, in page->private.
2. show pids in IO traces.
So, later we can retrieve process information according to IO traces.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds:
o initial trace.c and trace.h with skeleton functions
o Kconfig and Makefile to activate this feature
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch cleans up parameters on IO paths.
The key idea is to use f2fs_io_info adding a parameter, block address, and then
use this structure as parameters.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use more common function ra_meta_pages() with META_POR to readahead node blocks
in restore_node_summary() instead of ra_sum_pages(), hence we can simplify the
readahead code there, and also we can remove unused function ra_sum_pages().
changes from v2:
o use invalidate_mapping_pages as before suggested by Changman Lee.
changes from v1:
o fix one bug when using truncate_inode_pages_range which is pointed out by
Jaegeuk Kim.
Reviewed-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch moves one member of struct nat_entry: _flag_ to struct node_info,
so _version_ in struct node_info and _flag_ which are unsigned char type will
merge to one 32-bit space in register/memory. So the size of nat_entry will be
reduced from 28 bytes to 24 bytes (for 64-bit machine, reduce its size from 40
bytes to 32 bytes) and then slab memory using by f2fs will be reduced.
changes from v2:
o update description of memory usage gain for 64-bit machine suggested by
Changman Lee.
changes from v1:
o introduce inline copy_node_info() to copy valid data from node info suggested
by Jaegeuk Kim, it can avoid bug.
Reviewed-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Let's add readahead code for reading contiguous compact/normal summary blocks
in checkpoint, then we will gain better performance in mount procedure.
Changes from v1
o remove inappropriate 'unlikely' in npages_for_summary_flush.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now we use inmemory pages for atomic write only and provide abort procedure,
we don't need to truncate them explicitly.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The ckpt_valid_map and cur_valid_map are synced by seg_info_to_raw_sit.
In the case of small discards, the candidates are selected before sync,
while fitrim selects candidates after sync.
So, for small discards, we need to add candidates only just being obsoleted.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds two new ioctls to release inmemory pages grabbed by atomic
writes.
o f2fs_ioc_abort_volatile_write
- If transaction was failed, all the grabbed pages and data should be written.
o f2fs_ioc_release_volatile_write
- This is to enhance the performance of PERSIST mode in sqlite.
In order to avoid huge memory consumption which causes OOM, this patch changes
volatile writes to use normal dirty pages, instead blocked flushing to the disk
as long as system does not suffer from memory pressure.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We don't need to force to write dirty_exceeded for f2fs_balance_fs_bg.
This flag was only meaningful to write bypassing conditions.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
To improve recovery speed, f2fs try to readahead many contiguous blocks in warm
node segment, but for most time, abnormal power-off do not occur frequently, so
when mount a normal power-off f2fs image, by contrary ra so many blocks and then
invalid them will hurt the performance of mount.
It's better to just ra the first next-block for normal condition.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch does cleanup work, it introduces is_valid_blkaddr() to include
verification code for blkaddr with upper and down boundary value which were in
ra_meta_pages previous.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
1.We use zero as upper boundary value for ra SSA/CP blocks, we will skip
readahead as verification failure with max number, it causes low performance.
2.Low boundary value is not accurate for SSA/CP/POR region verification, so
these values need to be redefined.
This patch fixes above issues.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As inline_{dir,inode} stat is increased/decreased concurrently by multi threads,
so the value is not so accurate, let's use atomic type for counting accurately.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Added some commentaries for code readability and cleaned up if-statement
clearly.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If inode state is dirty, go straight to write.
Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The inmemory pages should be handled by invalidate_page since it needs to be
released int the truncation path.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In do_read_inode, if we failed __recover_inline_status, the inode has inline
flag without increasing its count.
Later, f2fs_evict_inode will decrease the count, which causes -1.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch revists retrial paths in f2fs.
The basic idea is to use cond_resched instead of retrying from the very early
stage.
Suggested-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to fix:
BUG: using smp_processor_id() in preemptible [00000000] code: f2fs_gc-254:0/384
(radix_tree_node_alloc+0x14/0x74) from [<c033d8a0>] (radix_tree_insert+0x110/0x200)
(radix_tree_insert+0x110/0x200) from [<c02e8264>] (gc_data_segment+0x340/0x52c)
(gc_data_segment+0x340/0x52c) from [<c02e8658>] (f2fs_gc+0x208/0x400)
(f2fs_gc+0x208/0x400) from [<c02e8a98>] (gc_thread_func+0x248/0x28c)
(gc_thread_func+0x248/0x28c) from [<c0139944>] (kthread+0xa0/0xac)
(kthread+0xa0/0xac) from [<c0105ef8>] (ret_from_fork+0x14/0x3c)
The reason is that f2fs calls radix_tree_insert under enabled preemption.
So, before calling it, we need to call radix_tree_preload.
Otherwise, we should use _GFP_WAIT for the radix tree, and use mutex or
semaphore to cover the radix tree operations.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previoulsy, we used rwlock for nat_entry lock.
But, now we have a lot of complex operations in set_node_addr.
(e.g., allocating kernel memories, handling radix_trees, and so on)
So, this patches tries to change spinlock to rw_semaphore to give CPUs to other
threads.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If there are many inodes that have data blocks in victim segment,
it takes long time to find a inode in gc_inode list.
Let's use radix_tree to reduce lookup time.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We've already made fi and sbi for inode. Let's avoid duplicated work.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fix the wrong error number in error path of f2fs_write_begin.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Little cleanup to distinguish each phase easily
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: modify indentation for code readability]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If an inode has converted inline_data which was written to the disk, we should
set its inode flag for further fsync so that this inline_data can be recovered
from sudden power off.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After flushing dirty nat entries, it has to be no more dirty nat
entries.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It's meaningless to check dirty_nat_cnt after re-dirtying nat entries in
journal. And although there are rooms for dirty nat entires if dirty_nat_cnt
is zero, it's also meaningless to check __has_cursum_space.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
A deadlock can be occurred:
Thread 1] Thread 2]
- f2fs_write_data_pages - f2fs_write_begin
- lock_page(page #0)
- grab_cache_page(page #X)
- get_node_page(inode_page)
- grab_cache_page(page #0)
: to convert inline_data
- f2fs_write_data_page
- f2fs_write_inline_data
- get_node_page(inode_page)
In this case, trying to lock inode_page and page #0 causes deadlock.
In order to avoid this, this patch adds a rule for this locking policy,
which is that page #0 should be locked followed by inode_page lock.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Two jump labels were adjusted in the implementation of the
create_node_manager_caches() function because these identifiers
contained typos.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_evict_inode,
commit_inmemory_pages
f2fs_gc
f2fs_iget
iget_locked
-> wait for inode free
Here, if the inode is same as the one to be evicted, f2fs should wait forever.
Actually, we should not call f2fs_balance_fs during f2fs_evict_inode to avoid
this.
But, the commit_inmem_pages calls f2fs_balance_fs by default, even if
f2fs_evict_inode wants to free inmemory pages only.
Hence, this patch adds to trigger f2fs_balance_fs only when there is something
to write.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It used nat_entry_set when create slab for sit_entry_set.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If a node page is request to be written during the reclaiming path, we should
submit the bio to avoid pending to recliam it.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now in f2fs, we have three inode cache: ORPHAN_INO, APPEND_INO, UPDATE_INO,
and we manage fields related to inode cache separately in struct f2fs_sb_info
for each inode cache type.
This makes codes a bit messy, so that this patch intorduce a new struct
inode_management to wrap inner fields as following which make codes more neat.
/* for inner inode cache management */
struct inode_management {
struct radix_tree_root ino_root; /* ino entry array */
spinlock_t ino_lock; /* for ino entry lock */
struct list_head ino_list; /* inode list head */
unsigned long ino_num; /* number of entries */
};
struct f2fs_sb_info {
...
struct inode_management im[MAX_INO_ENTRY]; /* manage inode cache */
...
}
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Because we have checked the contrary condition in case of "if" judgment, we do
not need to check the condition again in case of "else" judgment. Let's remove
it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_remount, we will stop gc thread and set need_restart_gc as true when new
option is set without BG_GC, then if any error occurred in the following
procedure, we can restore to start the gc thread.
But after that, We will fail to restore gc thread in start_gc_thread as BG_GC is
not set in new option, so we'd better move this condition judgment out of
start_gc_thread to fix this issue.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The locked page should be released before returning the function.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If i_size becomes large outside of MAX_INLINE_DATA, we shoud convert the inode.
Otherwise, we can make some dirty pages during the truncation, and those pages
will be written through f2fs_write_data_page.
At that moment, the inode has still inline_data, so that it tries to write non-
zero pages into inline_data area.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The scenario is like this.
One trhead triggers:
f2fs_write_data_pages
lock_page
f2fs_write_data_page
f2fs_lock_op <- wait
The other thread triggers:
f2fs_truncate
truncate_blocks
f2fs_lock_op
truncate_partial_data_page
lock_page <- wait for locking the page
This patch resolves this bug by relocating truncate_partial_data_page.
This function is just to truncate user data page and not related to FS
consistency as well.
And, we don't need to call truncate_inline_data. Rather than that,
f2fs_write_data_page will finally update inline_data later.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The # of inline_data inode is decreased only when it has inline_data.
After clearing the flag, we can't decreased the number.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It needs to write node pages if checkpoint is not doing in order to avoid
memory pressure.
Reviewed-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to control the memory footprint used by ino entries.
This will conduct best effort, not strictly.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If a system wants to reduce the booting time as a top priority, now we can
use a mount option, -o fastboot.
With this option, f2fs conducts a little bit slow write_checkpoint, but
it can avoid the node page reads during the next mount time.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
__submit_merged_bio f2fs_write_end_io f2fs_write_end_io
wait_io = X wait_io = x
complete(X) complete(X)
wait_io = NULL
wait_for_completion()
free(X)
spin_lock(X)
kernel panic
In order to avoid this, this patch removes the wait_io facility.
Instead, we can use wait_on_all_pages_writeback(sbi) to wait for end_ios.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If there is a chance to make a huge sized discard command, we don't need
to split it out, since each blkdev_issue_discard should wait one at a
time.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch simplifies the inline_data usage with the following rule.
1. inline_data is set during the file creation.
2. If new data is requested to be written ranges out of inline_data,
f2fs converts that inode permanently.
3. There is no cases which converts non-inline_data inode to inline_data.
4. The inline_data flag should be changed under inode page lock.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There's no point in using test_and_clear_bit_le() when we don't use the
return value of the function. Just use clear_bit_le() instead.
Coverity-id: 1016434
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_write_begin() doesn't initialize the 'dn' variable if the inode has
inline data. However it uses its contents to decide whether it should
just zero out the page or load data to it. Thus if we are unlucky we can
zero out page contents instead of loading inline data into a page.
CC: stable@vger.kernel.org
CC: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Rename f2fs_set/clear_bit to f2fs_test_and_set/clear_bit, which mean
set/clear bit and return the old value, for better readability.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Set raw_super default to NULL to avoid the possibly used
uninitialized warning, though we may never hit it in fact.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce f2fs_change_bit to simplify the change bit logic in
function set_to_next_nat{sit}.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use clear_inode_flag to replace the redundant cond_clear_inode_flag.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Remove the unneeded argument 'type' from __get_victim, use
NO_CHECK_TYPE directly when calling v_ops->get_victim().
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If user specifies too low end sector for trimming, f2fs_trim_fs() will
use uninitialized value as a number of trimmed blocks and returns it to
userspace. Initialize number of trimmed blocks early to avoid the
problem.
Coverity-id: 1248809
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch declares f2fs_convert_inline_dir as a static function, which was
reported by kbuild test robot.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces f2fs_dentry_ptr structure for the use of a function
parameter in inline_dentry operations.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a core function, f2fs_fill_dentries, to remove
redundant code in f2fs_readdir and f2fs_read_inline_dir.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, init_inode_metadata does not hold any parent directory's inode
page. So, f2fs_init_acl can grab its parent inode page without any problem.
But, when we use inline_dentry, that page is grabbed during f2fs_add_link,
so that we can fall into deadlock condition like below.
INFO: task mknod:11006 blocked for more than 120 seconds.
Tainted: G OE 3.17.0-rc1+ #13
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
mknod D ffff88003fc94580 0 11006 11004 0x00000000
ffff880007717b10 0000000000000002 ffff88003c323220 ffff880007717fd8
0000000000014580 0000000000014580 ffff88003daecb30 ffff88003c323220
ffff88003fc94e80 ffff88003ffbb4e8 ffff880007717ba0 0000000000000002
Call Trace:
[<ffffffff8173dc40>] ? bit_wait+0x50/0x50
[<ffffffff8173d4cd>] io_schedule+0x9d/0x130
[<ffffffff8173dc6c>] bit_wait_io+0x2c/0x50
[<ffffffff8173da3b>] __wait_on_bit_lock+0x4b/0xb0
[<ffffffff811640a7>] __lock_page+0x67/0x70
[<ffffffff810acf50>] ? autoremove_wake_function+0x40/0x40
[<ffffffff811652cc>] pagecache_get_page+0x14c/0x1e0
[<ffffffffa029afa9>] get_node_page+0x59/0x130 [f2fs]
[<ffffffffa02a63ad>] read_all_xattrs+0x24d/0x430 [f2fs]
[<ffffffffa02a6ca2>] f2fs_getxattr+0x52/0xe0 [f2fs]
[<ffffffffa02a7481>] f2fs_get_acl+0x41/0x2d0 [f2fs]
[<ffffffff8122d847>] get_acl+0x47/0x70
[<ffffffff8122db5a>] posix_acl_create+0x5a/0x150
[<ffffffffa02a7759>] f2fs_init_acl+0x29/0xcb [f2fs]
[<ffffffffa0286a8d>] init_inode_metadata+0x5d/0x340 [f2fs]
[<ffffffffa029253a>] f2fs_add_inline_entry+0x12a/0x2e0 [f2fs]
[<ffffffffa0286ea5>] __f2fs_add_link+0x45/0x4a0 [f2fs]
[<ffffffffa028b5b6>] ? f2fs_new_inode+0x146/0x220 [f2fs]
[<ffffffffa028b816>] f2fs_mknod+0x86/0xf0 [f2fs]
[<ffffffff811e3ec1>] vfs_mknod+0xe1/0x160
[<ffffffff811e4b26>] SyS_mknod+0x1f6/0x200
[<ffffffff81741d7f>] tracesys+0xe1/0xe6
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>