Commit Graph

125 Commits

Author SHA1 Message Date
Ben Dooks b647712f66 [ARM] S3C: Fix S3C24XX build to not include s3c64xx IIS devices
Commit 52da219e96 added IIS
platform devices, but these do not build on s3c24xx systems
and the file depends on SND_S3C24XX_SOC, which is selected
for all S3C64XX/S3C24XX systems.

As a quick fix, make the dev-audio.o file depends on
SND_S3C64XX_SOC_I2S instead.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-23 16:34:35 +01:00
Ben Dooks a3c7990117 [ARM] S3C24XX: Fix missing s3c_iis_device.
Commit 52da219e96 removed
the s3c_device_iis, but didn't replace it with anything
so a number of s3c24xx machines are currently failing
to build.

As a temporary fix, re-instate s3c_device_iis until a
proper replacement can be done for it.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-23 16:30:02 +01:00
Linus Torvalds ac1b7c378e Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (63 commits)
  mtd: OneNAND: Allow setting of boundary information when built as module
  jffs2: leaking jffs2_summary in function jffs2_scan_medium
  mtd: nand: Fix memory leak on txx9ndfmc probe failure.
  mtd: orion_nand: use burst reads with double word accesses
  mtd/nand: s3c6400 support for s3c2410 driver
  [MTD] [NAND] S3C2410: Use DIV_ROUND_UP
  [MTD] [NAND] S3C2410: Deal with unaligned lengths in S3C2440 buffer read/write
  [MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NAND
  [MTD] [NAND] S3C2410: Added a kerneldoc for s3c2410_nand_set
  mtd: physmap_of: Add multiple regions and concatenation support
  mtd: nand: max_retries off by one in mxc_nand
  mtd: nand: s3c2410_nand_setrate(): use correct macros for 2412/2440
  mtd: onenand: add bbt_wait & unlock_all as replaceable for some platform
  mtd: Flex-OneNAND support
  mtd: nand: add OMAP2/OMAP3 NAND driver
  mtd: maps: Blackfin async: fix memory leaks in probe/remove funcs
  mtd: uclinux: mark local stuff static
  mtd: uclinux: do not allow to be built as a module
  mtd: uclinux: allow systems to override map addr/size
  mtd: blackfin NFC: fix hang when using NAND on BF527-EZKITs
  ...
2009-06-22 16:56:22 -07:00
Russell King 915166d96f Merge branch 'next-s3c' of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2009-06-22 14:31:57 +01:00
Marek Szyprowski 49fb88af23 [ARM] S3C: Fix gpio-config off-by-one bug
Fix gpio-config off-by-one bug. Without this patch, touching GPA0 pin on
S3C64XX platform causes kernel oops.

Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22 14:12:39 +01:00
Russell King 413427b567 Merge branch 'next-s3c' of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2009-06-18 23:10:29 +01:00
Mark Brown d06a49eec9 [ARM] S3C64XX: Add device for IISv4 port
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16 23:30:50 +01:00
Mark Brown 52da219e96 [ARM] S3C64XX: Provide device for IIS ports
This allows the S3C64XX IIS drivers to be converted to the standard
driver model and allows fixes there for problems with attempting to
acquire the clocks for the IIS blocks via the clock API.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16 23:30:50 +01:00
Ben Dooks 5b7d70c6db USB: Gadget driver for Samsung HS/OtG block
Driver support for the new high-speed/OtG block that is
in the newer line of Samsung SoC devices such as the
S3C64XX series.

This driver does not currntly have DMA support enabled due
to issues with buffer alignment which need to be sorted out.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:44:47 -07:00
Russell King 547c32aeb5 Merge branch for-rmk-devel of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2009-06-10 22:41:06 +01:00
Michel Pollet 9db41f9edc [MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NAND
Added a flag to allow the machine code to tell the NAND
subsystem that it should try to pickup a BBT from the flash,
and also skip the NAND full scan at startup.

Signed-off-by: Michel Pollet <buserror@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-08 12:10:36 +01:00
Michel Pollet a4536b19df [MTD] [NAND] S3C2410: Added a kerneldoc for s3c2410_nand_set
Converted the old comnent to kerneldoc.

Signed-off-by: Michel Pollet <buserror@gmail.com>
[ben-linux@fluff.org: updated subject, spello fix]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-08 12:10:29 +01:00
Nelson Castillo fb6ea32587 [MTD] [NAND] S3C2410: Small colon cleanup
checkpatch would complain with "disable_ecc : 1".

Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
[ben-linux@fluff.org: subject cleanup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-30 17:54:40 +01:00
Ben Dooks bcb8a0d6f5 [ARM] S3C: Merge next-s3c64xx-dma2 into for-rmk-devel
Merge branch 'next-s3c64xx-dma2' into for-rmk-devel

Conflicts:

	arch/arm/plat-s3c64xx/Makefile
2009-05-18 16:32:29 +01:00
Ben Dooks 543899f610 [ARM] S3C64XX: Use common watchdog reset for system reset.
Use the newly moved <plat/watchdog-reset.h> to perform the
arch_reset() call which has been unimplemented for a while.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-17 23:40:30 +01:00
Ben Dooks 3cba5ef862 [ARM] S3C: Move watchdog system reset to own file.
Move the watchdog reset code from <mach/system-reset.h> to
a new file <plat/watchdog-reset.h> as this code is needed
by both s3c2410, s3c64xx and soon-to-be added s3c24a0.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-17 23:30:45 +01:00
Nelson Castillo 3f7ea467be [ARM] S3C: ADC: Expose number of remaining conversions to
convert callback

This patch allow us to efficiently modify the number of
remaining conversions from the client side. This us useful
when we do not know in advance how many conversions we will
need or when we need to cancel pending conversions.

This change is simple enough to be compatible with existing
code that can just define the new pointer in the callback
and ignore it.

Sample usage:

http://tinyurl.com/s3c2410-ts-c (function stylus_adc_action).

Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-16 22:22:01 +01:00
Nelson Castillo b57f0fe107 [ARM] S3C: ADC: Fix lines with more than 80 chars in adc.h
Small cleanup.

Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
[ben-linux@fluff.org: rewrote subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-16 22:22:01 +01:00
Ben Dooks f0e1fa7600 [ARM] S3C: Add USB high-speed/OtG device definitions
Add platform device definitions for the high-speed and OtG
capable device block on the newer Samsung parts.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-16 22:13:52 +01:00
Ben Dooks 3ac19bb443 [ARM] S3C: Do not set clk->owner field if unset
The s3c24xx_register_clock() function has been doing a test
on clk->owner to see if it is NULL, and then setting itself
as the owner if clk->owner == NULL.

This is not needed, arch/arm/plat-s3c/clock.c cannot be
compiled as a module, and even if it was, it should not be
playing with this field if it being registered from somewhere
else.

The best course of action is to remove this bit of
code completely.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-15 15:21:57 +01:00
Werner Almesberger a03f7daf6d [ARM] S3C64XX: Add HCLKx2
Add doubled HCLK to S3C64xx.

Signed-off-by: Werner Almesberger <werner@openmoko.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07 11:14:27 +01:00
Ben Dooks 4faf686763 [ARM] S3C64XX: Add S3C6400 SDHCI setup support
Add support for S3C6400 SDHCI channels 0 and 1, making
the GPIO code common to both S3C6400 and S3C6410.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07 11:04:58 +01:00
Ben Dooks d87964c460 [ARM] S3C: GPIO PM core GPIOlib integration
Move the GPIO suspend/resume support inline with the gpiolib support
so that it will work with both the S3C24XX and S3C64XX series.

The s3c_gpio_chip is extended to have a pm callback and a save block
to keep the state of the GPIO over suspend, and the code from the
s3c24xx implementation is added to a new common file.

The suspend process now uses the list of registered chips to go through
saving and restoring each one as appropriate, using the pm callback to
select the appropriate routine depending on the type of control register
present.

This change also means that any additional GPIO added should not require
changes to the PM.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07 11:04:56 +01:00
Ben Dooks 966bcc1438 [ARM] S3C64XX: Add IRQ PM code
Add support for saving the state of the IRQ registers over suspend.

This requires moving the S3C64XX UART registers into <plat/regs-serial.h>
and adding irq-pm.c which saves the state of all the IRQ registers.

The irq-pm.c saves all the IRQ registers, including the IRQ_EINT and
IRQ_EINT_GROUP registers as it was easier than adding three different
files. Also ensuring that all the registers are restored to the same
state as before suspend is considered to be the best thing to do.

Note, we do not suspend the VIC here, this is done by the VIC driver
itself.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07 11:04:56 +01:00
Ben Dooks 1deb507dc7 [ARM] S3C64XX: Add generic s3c64xx sys device.
Add an s3c64xx_sysclass and device for items that currently
want to bind to any s3c64xx processor. The first user of this
will be parts of the s3c64xx suspend support which need to
save device state over suspend/resume.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07 11:04:56 +01:00
Ben Dooks 0abfe9aab1 [ARM] S3C64XX: Add s3c6410_sysclass export
Add definition for s3c6410_sysclass which was missing
from arch/arm/plat-s3c/include/plat/cpu.h.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07 11:04:56 +01:00
Ben Dooks bd117bd161 [ARM] S3C64XX: Initial support for PM (suspend to RAM)
Add the initial support for the S3C64XX based systems to use
suspend-to-RAM to sleep.

Includes basic debugging for use with the SMDK6410 usign the
LEDs on the baseboard.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07 11:04:55 +01:00
Ben Dooks 4b637dc231 [ARM] S3C: PM save UART UDIVSLOT if doing PM
Add the facility to save the UART UDIVSLOT register if the UART
state is being saved over suspend.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07 11:04:55 +01:00
Ben Dooks 57699e9adf [ARM] S3C: Add debug to UART save and a per-arch callback pre-restore
Add a simple debug message on saving the UART state and add a per-arch
pre-restore function to be used by the s3c64xx restore code to ensure
the UARTs control registers do not go through any illegal state changes.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07 11:04:55 +01:00
Ben Dooks e6a2a9ce69 [ARM] S3C: Rename S3C24XX_PA_USBHOST to S3C_PA_USBHOST
The USB host base address is available on both the S3C24XX and S3C64XX
ranges.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07 11:04:54 +01:00
Ben Dooks eca8655ffa [ARM] S3C: Add common USB OHCI device definition
Add common definition for USB OHCI platform device, add a Kconfig
to selectively compile it and add update all the users.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07 11:04:54 +01:00
Ben Dooks 97c1b14523 [ARM] S3C: Move DMA channel management code to plat-s3c
Change the name of S3C2410_DMA_CHANNELS to S3C_DMA_CHANNELS in the process.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01 11:39:07 +01:00
Ben Dooks c133c29011 [ARM] S3C: Make common <plat/dma.h> header
Move the common information from the <mach/dma.h> header into a new
shareable <plat/dma.h> header for re-use on the s3c64xx.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01 11:39:07 +01:00
Ben Dooks ad14ff3749 [ARM] S3C: Fix sparse warning from missing 's3c_device_hwmon'
Fix the following sparse warning due to s3c_device_hwmon being
missing from <plat/devs.h>

devs.c:380:24: warning: symbol 's3c_device_hwmon' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-17 12:42:24 +01:00
Ben Dooks db75639406 [ARM] S3C: Export s3c_gpio_cfgpin and s3c_gpio_setpull for modules
Add an export of the two GPIO configuration calls
s3c_gpio_cfgpin and s3c_gpio_setpull to allow modules
to use them (such as ASoC drivers)

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16 11:52:02 +01:00
Daniel Silverstone c564e6ae6c i2c-s3c2410: Simplify bus frequency calculation
The platform data for the i2c-s3c2410 driver used to allow a min,
max and desired frequency for the I2C bus. This patch reduces it
to simply a desired frequency ceiling and corrects all the uses
of the platform data appropriately.

This means, for example, that on a system with a 66MHz fclk, a
request for 100KHz will achieve 65KHz which is safe and
acceptable, rather than 378KHz which it would have achieved
without this change.

Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk>
[ben-linux@fluff.org: tidy subject and description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 10:18:33 +01:00
Ben Dooks a192f7153b i2c-s3c2410: sda_delay should be in ns, not clock ticks
The sda_delay field should be specified in ns, not in clock ticks
as when using cpufreq we could be changing the bus rate.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
2009-04-07 10:18:33 +01:00
Russell King ed40d0c472 Merge branch 'origin' into devel
Conflicts:
	sound/soc/pxa/pxa2xx-i2s.c
2009-03-28 20:29:51 +00:00
Russell King f5f0e17a84 Merge branch 'next-s3c-pm' of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2009-03-26 22:44:43 +00:00
Linus Torvalds 61a091827e Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (97 commits)
  USB: qcserial: add device id for HP devices
  USB: isp1760: Add a delay before reading the SKIPMAP registers in isp1760-hcd.c
  USB: allow malformed LANGID descriptors
  USB: pxa27x_udc: typo fixes and code cleanups
  USB: gadget: gadget zero uses new suspend/resume hooks
  USB: gadget: composite device-level suspend/resume hooks
  USB: r8a66597-hcd: suspend/resume support
  USB: more u32 conversion after transfer_buffer_length and actual_length
  USB: Fix cp2101 USB serial device driver termios functions for console use
  USB: CP2101 New Device ID
  USB: ipaq: handle 4 endpoint devices
  USB: S3C: Move usb-control.h to platform include
  USB: ohci-hcd: Add ARCH_S3C24XX to the ohci-s3c2410.c glue
  USB: pedantic: spelling correction in comment for ch9.h
  USB: host: fix sparse warning: Using plain integer as NULL pointer
  USB: ohci-s3c2410: fix name of bus clock
  USB: ohci-s3c2410: remove <mach/hardware.h> include
  USB: serial: rename cp2101 driver to cp210x
  USB: CP2101 Reduce Error Logging
  USB: CP2101 Support AN205 baud rates
  ...
2009-03-26 11:17:39 -07:00
Ben Dooks 49121aa14c USB: S3C: Move usb-control.h to platform include
The usb-control.h is needed by ohci-s3c2410.c for both S3C24XX and S3C64XX
architectures, so move it to <plat/usb-control.h>

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:45 -07:00
Ben Dooks fff94cd9f5 [ARM] S3C: Tidy sleep code path to fix call flow
As noted by Russell King, the sleep code path is not
elegant and makes use of leaving items on the stack
between calls.

Change the code that does the following:

        if (s3c_cpu_save(regs_save) == 0) {
                flush_cache_all();
                S3C_PMDBG("preparing to sleep\n");
                pm_cpu_sleep();
        }

to simply call s3c_cpu_save, and let that do the
necessary calls to quiesce and sleep the system.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-10 11:48:07 +00:00
Ben Dooks eac8473972 ASoC: Fix Samsung S3C2412_IISMOD_SDF_{MSB,LSB} definitions
The definitions of S3C2412_IISMOD_SDF_MSB and S3C2412_IISMOD_SDF_LSB
are incorrect, being the same S3C2412_IISMOD_SDF_IIS which is the
only correct one in this series.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-09 18:28:17 +00:00
Ben Dooks aa8aba6944 [ARM] S3C: Do not kmalloc/kfree during inner suspend code.
The PM CRC checking code kmallocs an area to save a set of
CRC values during suspend. This triggers a warning due to the
call of a function that might sleep whilst the system is not
in a valid state to do so.

Move the allocation and free to points in the suspend and resume
process where they can call a function that might-sleep.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 13:19:54 +00:00
Ben Dooks 663a83048c [ARM] S3C: Avoid checking the task stackpage in pm-check
When doing the CRC check of the memory, avoid checking
the page that our stack is residing in as this changes
during the execution of the suspend and resume.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:38:06 +00:00
Ben Dooks d2b07fe2a3 [ARM] S3C: Update UART save over PM suspend/resume
Change the way the UART state is saved over suspend to allow the s3c64xx
code to modify the settings on resume to avoid any illegal state changes
to the UART clocks. This will also allow us to save the UDIVSLOT register
on newer SoCs.

Move to using a structure for the UART use the extant Kconfig configuration
specifying the number of UARTs.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:37:10 +00:00
Ben Dooks ef30e14420 [ARM] S3C: Rename sleep.S functions to be non-cpu specific
Rename s3c2410_cpu_resume to s3c_cpu_resume and s3c2410_cpu_save to
s3c_cpu_save to remove the CPU specific naming of these functions
which are now in the generic PM code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:37:05 +00:00
Ben Dooks 4e59c25dcb [ARM] S3C: Rename s3c2410_pm_init to s3c_pm_init.
Since we have moved a large proportion of the PM code to the common
support area, remove the cpu specific name from the initialisation
function.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:35:47 +00:00
Ben Dooks 56b3442688 [ARM] S3C: Make IRQ_EINT sleep control common
Move the IRQ_EINT sleep control to be available to all
s3c impelmentations. Since s3c_irqext_wake is not large,
place it in arch/arm/plat-s3c/pm.c as adding it to a new
file would be a waste of compile time.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:35:36 +00:00
Ben Dooks 840eeeb880 [ARM] S3C: Fix warnings in the PM memory CRC code
Fix warnings from struct resource being bigger than unsigned long by
forcing the type. We are only a 32bit platform so no physical memory
addresses will be too big to fit in this.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:33:58 +00:00