Commit Graph

2633 Commits

Author SHA1 Message Date
Linus Torvalds 338e33acd8 Merge branch 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata changes from Tejun Heo:
 "Nothing too interesting.  PCI ID additions, some sata_rcar fixes and a
  fringe bug fix for DMADIR handling which shouldn't affect any device
  remotely modern."

* 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  sata_rcar: fix interrupt handling
  ahci: add an observed PCI ID for Marvell 88se9172 SATA controller
  sata_rcar: clear STOP bit in bmdma_start() method
  libata: make ata_exec_internal_sg honor DMADIR
  ata_piix: add PCI IDs for Intel BayTail
  libata: update "Maintained by:" tags
2013-06-03 17:55:09 +09:00
Sergei Shtylyov 52a2a1087b sata_rcar: fix interrupt handling
The driver's interrupt handling code is too picky in deciding whether it should
handle an interrupt or not which causes completely unneeded spurious interrupts.
Thus make sata_rcar_{ata|serr}_interrupt() *void*; add ATA status register read
to sata_rcar_ata_interrupt() to clear an unexpected ATA interrupt -- it doesn't
get cleared by writing to the SATAINTSTAT register in the interrupt mode we use.

Also, in sata_rcar_ata_interrupt() we should check SATAINTSTAT register only for
enabled interrupts and we should clear  only those interrupts  that we have read
as active first time around, because else we have  a  race and risk clearing  an
interrupt that  can  occur between read  and write of the  SATAINTSTAT  register
and never registering it...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2013-06-02 00:54:45 -07:00
George Spelvin fcce9a35f8 ahci: add an observed PCI ID for Marvell 88se9172 SATA controller
A third possible PCI ID, as personally observed, and found in the
pci.ids list.

Signed-off-by: George Spelvin <linux@horizon.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-05-29 10:20:35 +09:00
Sergei Shtylyov df7e131f63 sata_rcar: clear STOP bit in bmdma_start() method
Iff bmdma_setup() has to stop a DMA transfer before starting a new
one, then the STOP bit in the ATAPI_CONTROL1 register will remain set
(it's only cleared when setting the START bit to 1) and then
bmdma_start() method will set both START and STOP bits simultaneously
which should abort the transfer being just started.  Avoid that by
explicitly clearing the STOP bit in bmdma_start() method (in this case
it will be ignored on write).

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2013-05-22 08:39:20 +09:00
Vincent Pelletier e771451c0a libata: make ata_exec_internal_sg honor DMADIR
libata honors DMADIR for regular commands, but not for internal commands
used (among other) during device initialisation.

This makes SATA-host-to-PATA-device bridges based on Silicon Image SiL3611
(such as "Abit Serillel 2") end up disabled when used with an ATAPI device
after a few tries.

Log output of the bridge being hot-plugged with an ATAPI drive:

  [ 9631.212901] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  [ 9631.212913] ata1: irq_stat 0x00000040, connection status changed
  [ 9631.212923] ata1: SError: { CommWake 10B8B DevExch }
  [ 9631.212939] ata1: hard resetting link
  [ 9632.104962] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [ 9632.106393] ata1.00: ATAPI: PIONEER DVD-RW  DVR-115, 1.06, max UDMA/33
  [ 9632.106407] ata1.00: applying bridge limits
  [ 9632.108151] ata1.00: configured for UDMA/33
  [ 9637.105303] ata1.00: qc timeout (cmd 0xa0)
  [ 9637.105324] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5)
  [ 9637.105335] ata1: hard resetting link
  [ 9638.044599] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [ 9638.047878] ata1.00: configured for UDMA/33
  [ 9643.044933] ata1.00: qc timeout (cmd 0xa0)
  [ 9643.044953] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5)
  [ 9643.044963] ata1: limiting SATA link speed to 1.5 Gbps
  [ 9643.044971] ata1.00: limiting speed to UDMA/33:PIO3
  [ 9643.044979] ata1: hard resetting link
  [ 9643.984225] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  [ 9643.987471] ata1.00: configured for UDMA/33
  [ 9648.984591] ata1.00: qc timeout (cmd 0xa0)
  [ 9648.984612] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5)
  [ 9648.984619] ata1.00: disabled
  [ 9649.000593] ata1: hard resetting link
  [ 9649.939902] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  [ 9649.955864] ata1: EH complete

With this patch, the drive enumerates correctly when libata is loaded with
atapi_dmadir=1:

  [ 9891.810863] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  [ 9891.810874] ata1: irq_stat 0x00000040, connection status changed
  [ 9891.810884] ata1: SError: { CommWake 10B8B DevExch }
  [ 9891.810900] ata1: hard resetting link
  [ 9892.762105] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [ 9892.763544] ata1.00: ATAPI: PIONEER DVD-RW  DVR-115, 1.06, max UDMA/33, DMADIR
  [ 9892.763558] ata1.00: applying bridge limits
  [ 9892.765393] ata1.00: configured for UDMA/33
  [ 9892.786063] ata1: EH complete
  [ 9892.792062] scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-115  1.06 PQ: 0 ANSI: 5
  [ 9892.798455] sr2: scsi3-mmc drive: 12x/12x writer dvd-ram cd/rw xa/form2 cdda tray
  [ 9892.798837] sr 0:0:0:0: Attached scsi CD-ROM sr2
  [ 9892.799109] sr 0:0:0:0: Attached scsi generic sg6 type 5

Based on a patch by Csaba Halász <csaba.halasz@gmail.com> on linux-ide:
http://marc.info/?l=linux-ide&m=136121147832295&w=2

tj: minor formatting changes.

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2013-05-22 08:31:48 +09:00
Chew, Chiau Ee fca8c90d51 ata_piix: add PCI IDs for Intel BayTail
Adds IDE-mode SATA Device IDs for the Intel BayTrail platform.

Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2013-05-16 11:06:29 -07:00
Tejun Heo 8c3d3d4b12 libata: update "Maintained by:" tags
Jeff moved on to a greener pasture.

 s/Maintained by: Jeff Garzik/Maintained by: Tejun Heo/g

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
2013-05-14 11:13:04 -07:00
Wolfram Sang 29589f06d2 drivers/ata: don't check resource with devm_ioremap_resource
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-05-12 15:19:46 +02:00
Linus Torvalds 1bf25e78af ARM: arm-soc: late cleanups
These are cleanups and smaller changes that either depend on earlier
 feature branches or came in late during the development cycle.
 We normally try to get all cleanups early, so these are the exceptions:
 
 - A follow-up on the clocksource reworks, hopefully the last time
   we need to merge clocksource subsystem changes through arm-soc.
   A first set of patches was part of the original 3.10 arm-soc cleanup
   series because of interdependencies with timer drivers now moved out
   of arch/arm.
 
 - Migrating the SPEAr13xx platform away from using auxdata for DMA
   channel descriptions towards using information in device tree,
   based on the earlier SPEAr multiplatform series
 
 - A few follow-ups on the Atmel SAMA5 support and other changes
   for Atmel at91 based on the larger at91 reworks.
 
 - Moving the armada irqchip implementation to drivers/irqchip
 
 - Several OMAP cleanups following up on the larger series already
   merged in 3.10.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUYj5U2CrR//JCVInAQLNIRAAvsCtYOmXTxkRBxdtNEUUbkEjx71Se7q0
 h9PR8vqlkbYwONkJ8a6j8pKq/WJDmLpHQWg/moBsvlGc6uEVBPBFhCWHs1+yGUzX
 GhnJOaIKh3+651hIoXccS+/YZ16e1EAzdCM7+1QegPTldsRGkTOiwXgmR51kmPrz
 6cZ8P5MFqMrWIy4XqWhOBbMDCY/An05IHMpniGIamUg2/uB921Z0wNFvDrnsg97u
 DsVEwimyCJ0j7aO4TH+fkvsjoGWnIhxPtpaIm8iff6TPRI49deRb3zYpnIONm+oG
 /cQrRf3BNW+aiTuRCTEjdBNGtcrYgN6CLWWjzgMhv1itSlX8swBcOhuNJRCGNQRI
 v3wL4aEBxUpPGGL8erc2GIW7pe29YC2UEYI2z1X/5MEzYO589zkkG2k+/3HQVUwp
 dnYpQxhjRMvh4mcodBJFRjzH1Z7agKUwtoKalAHRRH7r5gJDkpL3zLoMhYPTG5IZ
 OwU+aYf+dDxh2kKW0zs8a/qL97UTHjlTRUC9LPoumvJ7LlKeDfzEn7DHUm2gggiu
 dO9ye/NF/xEXoDXTl0Qp2wJ6/sbPSLyCYCIMdP/gJjWUiDDqqZ0VRaKL7vE/JWrd
 NJ7k5yunX8/kRgfqgRFLDdFnPj1JeYHlmexsq4l9TPbPstoIcbw8u1v9sr8aZF+Z
 agh9u4e7QU8=
 =HWfp
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late cleanups from Arnd Bergmann:
 "These are cleanups and smaller changes that either depend on earlier
  feature branches or came in late during the development cycle.  We
  normally try to get all cleanups early, so these are the exceptions:

   - A follow-up on the clocksource reworks, hopefully the last time we
     need to merge clocksource subsystem changes through arm-soc.

     A first set of patches was part of the original 3.10 arm-soc
     cleanup series because of interdependencies with timer drivers now
     moved out of arch/arm.

   - Migrating the SPEAr13xx platform away from using auxdata for DMA
     channel descriptions towards using information in device tree,
     based on the earlier SPEAr multiplatform series

   - A few follow-ups on the Atmel SAMA5 support and other changes for
     Atmel at91 based on the larger at91 reworks.

   - Moving the armada irqchip implementation to drivers/irqchip

   - Several OMAP cleanups following up on the larger series already
     merged in 3.10."

* tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
  ARM: OMAP4: change the device names in usb_bind_phy
  ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a
  ARM: SPEAr: conditionalize SMP code
  ARM: arch_timer: Silence debug preempt warnings
  ARM: OMAP: remove unused variable
  serial: amba-pl011: fix !CONFIG_DMA_ENGINE case
  ata: arasan: remove the need for platform_data
  ARM: at91/sama5d34ek.dts: remove not needed compatibility string
  ARM: at91: dts: add MCI DMA support
  ARM: at91: dts: add i2c dma support
  ARM: at91: dts: set #dma-cells to the correct value
  ARM: at91: suspend both memory controllers on at91sam9263
  irqchip: armada-370-xp: slightly cleanup irq controller driver
  irqchip: armada-370-xp: move IRQ handler to avoid forward declaration
  irqchip: move IRQ driver for Armada 370/XP
  ARM: mvebu: move L2 cache initialization in init_early()
  devtree: add binding documentation for sp804
  ARM: integrator-cp: convert use CLKSRC_OF for timer init
  ARM: versatile: use OF init for sp804 timer
  ARM: versatile: add versatile dtbs to dtbs target
  ...
2013-05-07 11:22:14 -07:00
Linus Torvalds 20b4fb4852 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...
2013-05-01 17:51:54 -07:00
Linus Torvalds 50528fabeb 1) More ACPI fixes, cleanups
2) Minor cleanups for sata_highbank, pata_at32, pata_octeon_cf,
    sata_rcar
 
 3) pata_legacy: small bug found in opti chipset code (untested fix,
    due to ancient h/w)
 
 4) sata_fsl: RX water mark config knob, some h/w needs it
 
 5) pata_imx: cleanups, DeviceTree support
 
 6) SCSI<->ATA translator: properly export translator version,
    not device firmware version
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIVAwUAUYBD4SWzCDIBeCsvAQLMKQ/+II9KX8ztaPIil+mm/Uzg47J5p7AUjG6b
 hk/jnwJTn1M+yvyTe1D1D9LM+9j12XTOCT3Q3u/W7CSFdOc+nMLbI6upty/rHs6L
 5N2OvTAA2r4k0CmHe/pXzV0YMkWQE48KQh4S/GZV1wQOt7l4fcfqcx9sEWFPh1dc
 4uud+nfeF9P9JG8W6in1hzRqFV++qY/jo7+NQeED24JgjpwpoB/PiJpg6JE4F9/4
 WUxWlHQkJyiCar7gCnJGSBAaN3D8t19ptdSx375spzgi1NQZV2AfyuliX1p0vEQo
 Z8q+3hY6m2kNtj6ZVLmIJIj/k4LUbU4E9hbPV8eIGLeTU46GZVkqZ6th+amCJw40
 iHsAyDXuzgne8kvkM9tvzPALauAurbt8PPZFh7aPP05pjI4FXBEO+BMe78TlnevQ
 F+2VBhIh6C9D7Mo9BIOiMB6sU0mpwqtfH3xaaz39U+cs+xKPa9Ws2lyOVZXGEwTV
 WaChOpUrN9NNeH9EN3GFA6KY4ovkfYdmc7ahYIBy+xyuh2AiLcsZmyqmEhMyCAQ8
 16y0yIoYQNQnC9QooezsuCT9WUqNA0YI+ICQrESX+kviN/wO5LamKN1xI5k/QHR2
 6eFuIPat8acHhpa01obOo1HOdvbSuO+uXOtiBToPf+S+d9NFMvVw/j4RkHkTV+Fv
 xVTbSvP5+TQ=
 =kLMT
 -----END PGP SIGNATURE-----

Merge tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

Pull libata update from Jeff Garzik:

 - More ACPI fixes, cleanups

 - Minor cleanups for sata_highbank, pata_at32, pata_octeon_cf,
   sata_rcar

 - pata_legacy: small bug found in opti chipset code (untested fix, due
   to ancient h/w)

 - sata_fsl: RX water mark config knob, some h/w needs it

 - pata_imx: cleanups, DeviceTree support

 - SCSI<->ATA translator: properly export translator version, not device
   firmware version

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_highbank: Rename proc_name to the module name
  ACPI/libata: Restore libata.noacpi support
  [libata] acpi: make ata_ap_acpi_handle not block
  [libata] SCSI: really use SATL version in VPD
  pata_imx: add devicetree support
  pata_imx: use void __iomem * for regs
  pata_imx: cleanup error path
  pata_imx: Use devm_clk_get
  sata_rcar: Convert to devm_ioremap_resource()
  fsl/sata: create a sysfs entry for rx water mark
  libata-acpi: remove redundent code for power resource handling
  sata_highbank: make ahci_highbank_pm_ops static
  pata_octeon_cf: Use resource_size function
  pata_legacy: bogus clock in opti82c46x_set_piomode()
  pata_at32: use module_platform_driver_probe()
2013-04-30 16:13:36 -07:00
Robert Richter 2cc1144a31 sata_highbank: Rename proc_name to the module name
mkinitrd looks at /sys/class/scsi_host/host$hostnum/proc_name to find
the module name of a disk driver. Current name is "highbank-ahci" but
the module is "sata_highbank". Rename it to match the module name.

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: <stable@vger.kernel.org> v3.7..
Signed-off-by: Robert Richter <robert.richter@calxeda.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-30 18:02:56 -04:00
Lv Zheng 19ccee765f ACPI/libata: Restore libata.noacpi support
This patch restores libata.noacpi support to libata-acpi.c.
There are broken optional control methods for ATA controller devices in the
real world.  The libata.noacpi has been used for a long time as a
workaround to deal with issues caused by the broken ASL codes.
1. The "noacpi" option is introduced by the following commit:
   commit 11ef697b37
   Date: Thu, 28 Sep 2006 11:29:01 -0700
   Subject: libata: ACPI and _GTF support
2. The "noacpi" option is renamed to "libata_noacpi" by the following
   commit:
   commit d7d0dad62a
   Date: Wed, 28 Mar 2007 01:57:37 -0400
   Subject: [libata] Disable ACPI by default; fix namespace problems
3. Some of its logics are changed over time - becomes relying on the
   "acpi_handle" bound to the ATA devices since this commit:
   commit fafbae87db
   Date: Tue, 15 May 2007 03:28:16 +0900
   Subject: libata-acpi: implement ata_acpi_associate()
4. The option is deleted by the following commit:
   commit 30dcf76acc
   Date: Mon, 25 Jun 2012 16:13:04 +0800
   Subject: libata: migrate ACPI code over to new bindings
But the libata.noacpi setup is still left in the kernel without codes to
implement it.  So the deletion introduces a regression to the Linux.
This patch disables ATA_ACPI support at runtime by stopping acpi binding
on the ATA devices to fix this regression.
This patch is tested by booting a SATA x86-64 kernel or a PATA x86 kernel
with or without "libata.noacpi=1" kernel command line argument.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-30 18:02:53 -04:00
Aaron Lu d66af4df08 [libata] acpi: make ata_ap_acpi_handle not block
Since commit 30dcf76acc, ata_ap_acpi_handle will always do a namespace
walk, which requires acquiring an acpi namespace mutex. This made it
impossible to be used when calling path has held a spinlock.

For example, it can occur in the following code path for pata_acpi:
ata_scsi_queuecmd (ap->lock is acquired)
  __ata_scsi_queuecmd
    ata_scsi_translate
      ata_qc_issue
        pacpi_qc_issue
          ata_acpi_stm
            ata_ap_acpi_handle
              acpi_get_child
                acpi_walk_namespace
                  acpi_ut_acquire_mutex (acquire mutex while holding lock)
This caused scheduling while atomic bug, as reported in bug #56781.

Actually, ata_ap_acpi_handle doesn't have to walk the namespace every
time it is called, it can simply return the bound acpi handle on the
corresponding SCSI host. The reason previously it is not done this way
is, ata_ap_acpi_handle is used in the binding function
ata_acpi_bind_host by ata_acpi_gtm when the handle is not bound to the
SCSI host yet. Since we already have the ATA port's handle in its
binding function, we can simply use it instead of calling
ata_ap_acpi_handle there. So introduce a new function __ata_acpi_gtm,
where it will receive an acpi handle param in addition to the ATA port
which is solely used for debug statement. With this change, we can make
ata_ap_acpi_handle simply return the bound handle for SCSI host instead
of walking the acpi namespace now.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=56781
Reported-and-tested-by: <kenzopl@o2.pl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-30 18:02:45 -04:00
Linus Torvalds 5d434fcb25 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small
  code cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits)
  mm: Convert print_symbol to %pSR
  gfs2: Convert print_symbol to %pSR
  m32r: Convert print_symbol to %pSR
  iostats.txt: add easy-to-find description for field 6
  x86 cmpxchg.h: fix wrong comment
  treewide: Fix typo in printk and comments
  doc: devicetree: Fix various typos
  docbook: fix 8250 naming in device-drivers
  pata_pdc2027x: Fix compiler warning
  treewide: Fix typo in printks
  mei: Fix comments in drivers/misc/mei
  treewide: Fix typos in kernel messages
  pm44xx: Fix comment for "CONFIG_CPU_IDLE"
  doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP"
  mmzone: correct "pags" to "pages" in comment.
  kernel-parameters: remove outdated 'noresidual' parameter
  Remove spurious _H suffixes from ifdef comments
  sound: Remove stray pluses from Kconfig file
  radio-shark: Fix printk "CONFIG_LED_CLASS"
  doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE
  ...
2013-04-30 09:36:50 -07:00
Linus Torvalds 4f567cbc95 Char / Misc driver update for 3.10-rc1
Here's the big char / misc driver update for 3.10-rc1
 
 A number of various driver updates, the majority being new functionality
 in the MEI driver subsystem (it's now a subsystem, it started out just a
 single driver), extcon updates, memory updates, hyper-v updates, and a
 bunch of other small stuff that doesn't fit in any other tree.
 
 All of these have been in linux-next for a while
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlF+mtYACgkQMUfUDdst+ymFXQCfdLsD4Cxz+jkgW+tljh9i70XD
 OFkAnRPMMhLS8/kddf02lLMYzYUFdy1U
 =zaFJ
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver update from Greg Kroah-Hartman:
 "Here's the big char / misc driver update for 3.10-rc1

  A number of various driver updates, the majority being new
  functionality in the MEI driver subsystem (it's now a subsystem, it
  started out just a single driver), extcon updates, memory updates,
  hyper-v updates, and a bunch of other small stuff that doesn't fit in
  any other tree.

  All of these have been in linux-next for a while"

* tag 'char-misc-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (148 commits)
  Tools: hv: Fix a checkpatch warning
  tools: hv: skip iso9660 mounts in hv_vss_daemon
  tools: hv: use FIFREEZE/FITHAW in hv_vss_daemon
  tools: hv: use getmntent in hv_vss_daemon
  Tools: hv: Fix a checkpatch warning
  tools: hv: fix checks for origin of netlink message in hv_vss_daemon
  Tools: hv: fix warnings in hv_vss_daemon
  misc: mark spear13xx-pcie-gadget as broken
  mei: fix krealloc() misuse in in mei_cl_irq_read_msg()
  mei: reduce flow control only for completed messages
  mei: reseting -> resetting
  mei: fix reading large reposnes
  mei: revamp mei_irq_read_client_message function
  mei: revamp mei_amthif_irq_read_message
  mei: revamp hbm state machine
  Revert "drivers/scsi: use module_pcmcia_driver() in pcmcia drivers"
  Revert "scsi: pcmcia: nsp_cs: remove module init/exit function prototypes"
  scsi: pcmcia: nsp_cs: remove module init/exit function prototypes
  mei: wd: fix line over 80 characters
  misc: tsl2550: Use dev_pm_ops
  ...
2013-04-29 11:18:34 -07:00
Linus Torvalds 96a3e8af5a PCI changes for the v3.10 merge window:
PCI device hotplug
     - Remove ACPI PCI subdrivers (Jiang Liu, Myron Stowe)
     - Make acpiphp builtin only, not modular (Jiang Liu)
     - Add acpiphp mutual exclusion (Jiang Liu)
 
   Power management
     - Skip "PME enabled/disabled" messages when not supported (Rafael Wysocki)
     - Fix fallback to PCI_D0 (Rafael Wysocki)
 
   Miscellaneous
     - Factor quirk_io_region (Yinghai Lu)
     - Cache MSI capability offsets & cleanup (Gavin Shan, Bjorn Helgaas)
     - Clean up EISA resource initialization and logging (Bjorn Helgaas)
     - Fix prototype warnings (Andy Shevchenko, Bjorn Helgaas)
     - MIPS: Initialize of_node before scanning bus (Gabor Juhos)
     - Fix pcibios_get_phb_of_node() declaration "weak" annotation (Gabor Juhos)
     - Add MSI INTX_DISABLE quirks for AR8161/AR8162/etc (Xiong Huang)
     - Fix aer_inject return values (Prarit Bhargava)
     - Remove PME/ACPI dependency (Andrew Murray)
     - Use shared PCI_BUS_NUM() and PCI_DEVID() (Shuah Khan)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRfhSWAAoJEFmIoMA60/r8GrYQAIHDsyZIuJSf6g+8Td1h+PIC
 YD3wQhbyrDqQDuKU4+9cz+JsbHmnozUGA4UmlwmOGBxEa/Uauspb6yX1P1+x9Ok1
 WD7Ar3BlA5OuYI/1L1mgCiA428MTujwoR4fPnC0+KFy8xk1tBpmhzzeOFohbKyFF
 hMBO/Xt9tCzPATJ1LhjIH4xAykfDkbnPNHNcUKRoAkRo0CO0lS8gcTk0shXXSNng
 p9kQ6c4cYZvlRIJTwlawWV09nr7mDsBYa3JClqXYZufUWfEwvIuhisJxCJ57sWi9
 t+Ev8dm7VM6Cr5dV+ORArlboBFrq4f/W5U9j9GPFrRplwf+WbNT6tNGSpSDq8XhU
 Q7JjNgPWVdWXe1vIsMwaO49zi45/bNehuCSFLZiyPZwedMk764tys+iYw+tMRtv1
 tBR7lwESSXfagmvWyQAuQOTy6Rj26BPd2T8e2lMsvsuQO9mCyTK6Ey3YyKuqKQK/
 l5Gns4vv4eaCjGXqqDGiydUjSes+r/v1bu43XiRnwPQJUKb5kr5SjN5/zSMBuUgm
 TLT/bnv8qvdFxCpVQJFv4k/uzULARMdbvLtTy8osB14vNHX9jPn+xORjLaZNiO6O
 7fFispMU8Om56hNkD6C451r3icRjjGlD7OA8KOlbZ8f876sLzGV9i6P9gwCoRdEB
 wclDPsN7kAzw/V2sEE60
 =bj8i
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v3.10 merge window:

  PCI device hotplug
   - Remove ACPI PCI subdrivers (Jiang Liu, Myron Stowe)
   - Make acpiphp builtin only, not modular (Jiang Liu)
   - Add acpiphp mutual exclusion (Jiang Liu)

  Power management
   - Skip "PME enabled/disabled" messages when not supported (Rafael
     Wysocki)
   - Fix fallback to PCI_D0 (Rafael Wysocki)

  Miscellaneous
   - Factor quirk_io_region (Yinghai Lu)
   - Cache MSI capability offsets & cleanup (Gavin Shan, Bjorn Helgaas)
   - Clean up EISA resource initialization and logging (Bjorn Helgaas)
   - Fix prototype warnings (Andy Shevchenko, Bjorn Helgaas)
   - MIPS: Initialize of_node before scanning bus (Gabor Juhos)
   - Fix pcibios_get_phb_of_node() declaration "weak" annotation (Gabor
     Juhos)
   - Add MSI INTX_DISABLE quirks for AR8161/AR8162/etc (Xiong Huang)
   - Fix aer_inject return values (Prarit Bhargava)
   - Remove PME/ACPI dependency (Andrew Murray)
   - Use shared PCI_BUS_NUM() and PCI_DEVID() (Shuah Khan)"

* tag 'pci-v3.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits)
  vfio-pci: Use cached MSI/MSI-X capabilities
  vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
  PCI: Remove "extern" from function declarations
  PCI: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
  PCI: Drop msi_mask_reg() and remove drivers/pci/msi.h
  PCI: Use msix_table_size() directly, drop multi_msix_capable()
  PCI: Drop msix_table_offset_reg() and msix_pba_offset_reg() macros
  PCI: Drop is_64bit_address() and is_mask_bit_support() macros
  PCI: Drop msi_data_reg() macro
  PCI: Drop msi_lower_address_reg() and msi_upper_address_reg() macros
  PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directly
  PCI: Use cached MSI/MSI-X offsets from dev, not from msi_desc
  PCI: Clean up MSI/MSI-X capability #defines
  PCI: Use cached MSI-X cap while enabling MSI-X
  PCI: Use cached MSI cap while enabling MSI interrupts
  PCI: Remove MSI/MSI-X cap check in pci_msi_check_device()
  PCI: Cache MSI/MSI-X capability offsets in struct pci_dev
  PCI: Use u8, not int, for PM capability offset
  [SCSI] megaraid_sas: Use correct #define for MSI-X capability
  PCI: Remove "extern" from function declarations
  ...
2013-04-29 09:30:25 -07:00
Arnd Bergmann f54ae513d3 Merge branch 'spear/dwdma' into late/cleanup
This is a series originally prepared for inclusion in 3.9, which did
not work out because of dependencies on the dmaengine driver. All the
changes for the dmaengine code are merged in 3.9 now, so we can finally
do the switchover and remove the now unnecessary dma definitions for
spear13xx from the platform code.

The dma platform_data actually made up the majority of the spear13xx
platform code overall, so moving that into device tree files makes the
code substantially smaller.

* spear/dwdma:
  ata: arasan: remove the need for platform_data
  ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT
  serial: pl011: use generic DMA slave configuration if possible
  spi: pl022: use generic DMA slave configuration if possible

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19 22:50:52 +02:00
Arnd Bergmann e34d3865ee ata: arasan: remove the need for platform_data
This adds a complete DT binding for the arasan device driver. There is
currently only one user, which is the spear13xx platform, so we don't
actually have to parse all the properties until another user comes in,
but this does use the generic DMA binding to find the DMA channel.

The patch is untested so far and is part of a series to convert
the spear platform over to use the generic DMA binding, so it
should stay with the rest of the series.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.linux@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: devicetree-discuss@lists.ozlabs.org
2013-04-19 22:25:51 +02:00
Myron Stowe 69fd315736 ahci: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4b
With the 0x1b4b vendor ID #define in place, convert hard-coded ID
values.

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
2013-04-15 14:30:44 -06:00
Greg Kroah-Hartman 2f093e2aa4 Merge 3.9-rc7 into char-misc-next
We want the fixes in there.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-14 18:21:35 -07:00
Wang YanQing 59affa501e pata_pdc2027x: Fix compiler warning
Fix the follwing warnings:
linux/drivers/ata/pata_pdc2027x.c:66: warning: 'pdc2027x_reinit_one' declared 'static' but never defined

pdc2027x_reinit_one are defined only when CONFIG_PM is defined,
thus making it conditional.

Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-12 15:24:12 +02:00
Baruch Even 3f1317a2be [libata] SCSI: really use SATL version in VPD
As per c78968bb by Jeff Garzik ([libata] SCSI: simulator version, not device
version, belongs in VPD) We need to provide the SATL driver version and not the
disk firmware version but the code overwrites the driver version with the disk
version.

Signed-off-by: Baruch Even <baruch@ev-en.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-11 19:39:44 -04:00
Sascha Hauer b9d15db2b8 pata_imx: add devicetree support
Not much to do here, only the compatible entries have to be added.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-11 19:38:00 -04:00
Sascha Hauer 51b5539c03 pata_imx: use void __iomem * for regs
regs is returned from ioremap, so add a __iomem. Also, make it
void * instead of u8 *.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-11 19:37:53 -04:00
Sascha Hauer ff540d029a pata_imx: cleanup error path
- rename free_priv label to 'err' since priv is allocated with devm_*
  and not freed here.
- add missing 'goto err' in case ata_host_activate fails
- add 'ret' variable to return correct error value instead of hardcoded
  -ENOMEM in error case.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-11 19:37:46 -04:00
Sascha Hauer 50f5a3415c pata_imx: Use devm_clk_get
To make the error path a bit simpler.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-11 19:37:38 -04:00
Sachin Kamat 2de1d5e159 sata_rcar: Convert to devm_ioremap_resource()
Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> 
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-11 19:34:48 -04:00
Al Viro 3f02567750 sata_svw: switch to ->show_info()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:28 -04:00
Qiang Liu 7551c40d90 fsl/sata: create a sysfs entry for rx water mark
Support config RX WATER MARK via sysfs when running at run-time;
A wrokaround for fix the exception happened to some WD HDD, found on
WD3000HLFS-01G6U1, WD3000HLFS-01G6U0, some SSD disks. The read performance
is also regression (about 30%) when use default value.

According to the latest documents, 0x10 is the default value of RX WATER MARK,
but exception/performance issue happened to some disks mentioned above.

The exception log as below when testing read performance with IOZone:
ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x800000 action 0x6 frozen
ata1: SError: { LinkSeq }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/00:00:ff:2c:14/01:00:02:00:00/40 tag 0 ncq 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/00:08:ff:2d:14/01:00:02:00:00/40 tag 1 ncq 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/10:10:af:08:6e/00:00:12:00:00/40 tag 2 ncq 8192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: hard resetting link
ata1: Hardreset failed, not off-lined 0
ata1: Signature Update detected @ 504 msecs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1: EH complete

The exception/performance can be resolved when RX WATER MARK value is 0x16.

Signed-off-by: Qiang Liu <qiang.liu@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:55:36 -04:00
Aaron Lu 7381fe7374 libata-acpi: remove redundent code for power resource handling
With commit:
bc9b6407bd
ACPI / PM: Rework the handling of devices depending on power resources

The ACPI core now takes care of the power resources an acpi device
depends on in that when the power resources are turned on, any devices
that are bound to or in the dependent list of this acpi device will be
runtime resumed. So there is no need for ata acpi code to duplicate this
effort, and thus, the ata_acpi_(un)register_power_resource functions are
no longer needed.

The above commit thinks the scsi device is not bound to the acpi device,
so needs to be added to the dependent list. But actually, it is. So
there is no need to add it to the dependent list, or it will be runtime
resumed twice(though this wouldn't cause any problem).

This patch fixes it, and as a result, the
ata_acpi_(un)register_power_resource and ata_acpi_(un)bind functions
are removed.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:55:32 -04:00
Jingoo Han b1a72d600a sata_highbank: make ahci_highbank_pm_ops static
Make ahci_highbank_pm_ops static because ahci_highbank_pm_ops is
not exported.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:53:45 -04:00
Alexandru Gheorghiu b1cbe7d621 pata_octeon_cf: Use resource_size function
Use resource_size function instead of explicit computation.
Patch found using coccinelle.

Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:53:30 -04:00
Dan Carpenter e0044c9822 pata_legacy: bogus clock in opti82c46x_set_piomode()
"sysclk" is used as an index into a 4 element array.  My static
checker complains because it can be out of bounds.  From the
context, it looks like there is a right bit shift missing.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:53:10 -04:00
Jingoo Han bdfa2e7e5a pata_at32: use module_platform_driver_probe()
This patch uses module_platform_driver_probe() macro which makes
the code smaller and simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:52:10 -04:00
Krzysztof Mazur 6d3bfc7be6 [libata] Fix HDIO_DRIVE_* ioctl() Linux 3.9 regression
On Mon, Mar 25, 2013 at 06:26:50PM +0100, Ronald wrote:
> In reply to [1]: I have the same issue. Git bisect took 50+ rebuilds xD
>
> Smartd does not work anymore since 84a9a8cd9 ([libata] Set proper SK
> when CK_COND is set.).

> [1] http://www.spinics.net/lists/linux-ide/msg45268.html

It seems that the SAM_STAT_CHECK_CONDITION is not cleared
causing -EIO, because that patch modified sensebuf and
the check for clearing SAM_STAT_CHECK_CONDITION is no longer valid.

Fix that.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:48:49 -04:00
David Woodhouse 8e725c7f8a libata: fix DMA to stack in reading devslp_timing parameters
Commit 803739d25c ("[libata] replace
sata_settings with devslp_timing"), which was also Cc: stable, used a
stack buffer to receive data from ata_read_log_page(), which triggers
the following warning:
 ahci 0000:00:1f.2: DMA-API: device driver maps memory fromstack [addr=ffff880140469948]

Fix this by using ap->sector_buf instead of a stack buffer.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:45:57 -04:00
Youquan Song b55f84e2d5 ata_piix: Fix DVD not dectected at some Haswell platforms
There is a quirk patch 5e5a4f5d5a
"ata_piix: make DVD Drive recognisable on systems with Intel Sandybridge
 chipsets(v2)" fixing the 4 ports IDE controller 32bit PIO mode.

We've hit a problem with DVD not recognized on Haswell Desktop platform which
includes Lynx Point 2-port SATA controller.

This quirk patch disables 32bit PIO on this controller in IDE mode.

v2: Change spelling error in statememnt pointed by Sergei Shtylyov.
v3: Change comment statememnt and spliting line over 80 characters pointed by
    Libor Pechacek and also rebase the patch against 3.8-rc7 kernel.

Tested-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:43:36 -04:00
Shan Hai a32450e127 libata: Set max sector to 65535 for Slimtype DVD A DS8A8SH drive
The Slimtype DVD A  DS8A8SH drive locks up when max sector is smaller than
65535, and the blow backtrace is observed on locking up:

INFO: task flush-8:32:1130 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
flush-8:32      D ffffffff8180cf60     0  1130      2 0x00000000
 ffff880273aef618 0000000000000046 0000000000000005 ffff880273aee000
 ffff880273aee000 ffff880273aeffd8 ffff880273aee010 ffff880273aee000
 ffff880273aeffd8 ffff880273aee000 ffff88026e842ea0 ffff880274a10000
Call Trace:
 [<ffffffff8168fc2d>] schedule+0x5d/0x70
 [<ffffffff8168fccc>] io_schedule+0x8c/0xd0
 [<ffffffff81324461>] get_request+0x731/0x7d0
 [<ffffffff8133dc60>] ? cfq_allow_merge+0x50/0x90
 [<ffffffff81083aa0>] ? wake_up_bit+0x40/0x40
 [<ffffffff81320443>] ? bio_attempt_back_merge+0x33/0x110
 [<ffffffff813248ea>] blk_queue_bio+0x23a/0x3f0
 [<ffffffff81322176>] generic_make_request+0xc6/0x120
 [<ffffffff81322308>] submit_bio+0x138/0x160
 [<ffffffff811d7596>] ? bio_alloc_bioset+0x96/0x120
 [<ffffffff811d1f61>] submit_bh+0x1f1/0x220
 [<ffffffff811d48b8>] __block_write_full_page+0x228/0x340
 [<ffffffff811d3650>] ? attach_nobh_buffers+0xc0/0xc0
 [<ffffffff811d8960>] ? I_BDEV+0x10/0x10
 [<ffffffff811d8960>] ? I_BDEV+0x10/0x10
 [<ffffffff811d4ab6>] block_write_full_page_endio+0xe6/0x100
 [<ffffffff811d4ae5>] block_write_full_page+0x15/0x20
 [<ffffffff811d9268>] blkdev_writepage+0x18/0x20
 [<ffffffff81142527>] __writepage+0x17/0x40
 [<ffffffff811438ba>] write_cache_pages+0x34a/0x4a0
 [<ffffffff81142510>] ? set_page_dirty+0x70/0x70
 [<ffffffff81143a61>] generic_writepages+0x51/0x80
 [<ffffffff81143ab0>] do_writepages+0x20/0x50
 [<ffffffff811c9ed6>] __writeback_single_inode+0xa6/0x2b0
 [<ffffffff811ca861>] writeback_sb_inodes+0x311/0x4d0
 [<ffffffff811caaa6>] __writeback_inodes_wb+0x86/0xd0
 [<ffffffff811cad43>] wb_writeback+0x1a3/0x330
 [<ffffffff816916cf>] ? _raw_spin_lock_irqsave+0x3f/0x50
 [<ffffffff811b8362>] ? get_nr_inodes+0x52/0x70
 [<ffffffff811cb0ac>] wb_do_writeback+0x1dc/0x260
 [<ffffffff8168dd34>] ? schedule_timeout+0x204/0x240
 [<ffffffff811cb232>] bdi_writeback_thread+0x102/0x2b0
 [<ffffffff811cb130>] ? wb_do_writeback+0x260/0x260
 [<ffffffff81083550>] kthread+0xc0/0xd0
 [<ffffffff81083490>] ? kthread_worker_fn+0x1b0/0x1b0
 [<ffffffff8169a3ec>] ret_from_fork+0x7c/0xb0
 [<ffffffff81083490>] ? kthread_worker_fn+0x1b0/0x1b0

 The above trace was triggered by
   "dd if=/dev/zero of=/dev/sr0 bs=2048 count=32768"

 It was previously working by accident, since another bug introduced
 by 4dce8ba94c (libata: Use 'bool' return value for ata_id_XXX) caused
 all drives to use maxsect=65535.

Cc: stable@vger.kernel.org
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:33:43 -04:00
Greg Kroah-Hartman e58b9a25ee ASoC/extcon: arizona: Fix interaction between HPDET and headphone outputs
This patch series covers both ASoC and extcon subsystems and fixes an
 interaction between the HPDET function and the headphone outputs - we
 really shouldn't run HPDET while the headphone is active.  The first
 patch is a refactoring to make the extcon side easier.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRUcMYAAoJELSic+t+oim9PkAP/RQWC98LrD3kQgVk22MIDdyk
 P7dr37AePy+nMHP/sp3XIVyeD6pwuRWrlf31jAgMsXSb/+8ymJ3oO3t6aPUa9V9+
 KsxxoSUW+/ZO+88aK4r/w/Y45XMqMXsoEwllIxZoEpHXhDIxYFyF8wloPBXLzzbw
 AALowigrNbeYuijr5R1oV+kUOcT8DpzbamoK0jSbpdBdoPEP3ypD/yJTdi/RSyu/
 ELRNZFy4jUw2B3HVOB1YxUeCPpPA63u1oTypFgD7XrQX5v4MDuWyCv5bbBd7KhBk
 vbK/PHti5CMvi5RbA2EHbkI+n/Lb1qfnxIggN5BaSOQ1tlqrHnMlHYoSE/Sjterh
 TDGyYDNrWU1Wve2NTDJEd8oECPwm+8ABBnRYgwtnth/4D/EFkT+6Pv8FuIlYg1ku
 Tj/jwS2q/q26WfssDOph/GfUXtaagMALY99yy/HXM9RPYztOnUyvJIXLzKUUdapT
 KluChggzbj5ytsSy3L808BkgDxYTwHxva4q+n0ST4hDIeqe95HyE8gZA8jrYOf7T
 oA4tsBL3i0YGkPoPkVhMY9qeV0AOwDVlZioGP9Qcs8EI/Z9Bri8NZ4iW8VWkNoTt
 QG7EyuJy90VI/XvGgpITXKXxWQStMZG4+df6pXcn1h47K6ujtDyK/PBBt3t0OPCp
 WihSDHwuFQPSDWYULbZQ
 =gc7f
 -----END PGP SIGNATURE-----

Merge tag 'arizona-extcon-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into char-misc-next

Mark writes:

	ASoC/extcon: arizona: Fix interaction between HPDET and headphone outputs

	This patch series covers both ASoC and extcon subsystems and fixes an
	interaction between the HPDET function and the headphone outputs - we
	really shouldn't run HPDET while the headphone is active.  The first
	patch is a refactoring to make the extcon side easier.
2013-03-26 09:19:02 -07:00
Linus Torvalds c8c1f16717 Simple stuff. See one-line summaries.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIVAwUAUU0ozSWzCDIBeCsvAQKsQg/9GMxDhhkVny81gRf03CfXR2Xf1cRTm29P
 +VP9lll2T5WRW4+idqCoUWdDNjMGXPkHJ03xA3coPja+eidHs90l8Lw0hWHsgbXn
 oxbbG7VwXNyTts35ivjHnsesHtdGZDkSibBb06zN/AsZao2IxMNeMpFaj9NbRJVH
 kDbrsvTe3xdhQ7YBuRuNMQyq5VQ7DsTrRbvX74TFh1BuXAlmVfbpNLT8VPB7dS18
 RlPZVY7fTwDj9Kfp7izil/8k4Gk8oNOgGgEAQ9vFM6o3mmKQx2IFdRKBqcyOm27O
 2zEMJ+qW8BfWgWoB705u/QTLaNboFFPSFy9uNyBDdAyGlyhCd3gU+YGpS+7o+hPs
 5IJjU/Vq2zFRsE5b6yR+DASkZKvG3DIShNk3a27WaMXlnm+sa4R9Xo1f69DT/E1r
 9TymozQA6v6pulBA1Gw97Z+FpO9ElRNfVLRUHDzvOgz+uNtd1kMKi54P4U+LqRIf
 K9Wi7Rp7H5YZ5YEkY7JpvrNNSzFA0aUAyDGcaLiWICbRiAxqDRkkZfymCR97IJz/
 KfyXMiCqCDwhHvVysO+7LzA/8hqinkBUbxLHmvqFw5ih1EftG4bpzVA+b++z9aRr
 /NqJ5jNIuWyKy4iak71/Rwi9eGq5JtiyvwcCm1jSzSzhA8UmB+YUgAiGm53v1PZa
 xN5JzUYDxoU=
 =ovtO
 -----END PGP SIGNATURE-----

Merge tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

Pull libata updates from Jeff Garzik:
 "Simple stuff.  See one-line summaries."

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_samsung_cf: use module_platform_driver_probe()
  [libata] Avoid specialized TLA's in ZPODD's Kconfig
  libata-acpi.c: fix copy and paste mistake in ata_acpi_register_power_resource
  sata_fsl: Remove redundant NULL check before kfree
  ahci: Add Device IDs for Intel Wellsburg PCH
  ata_piix: Add MODULE_PARM_DESC to prefer_ms_hyperv
2013-03-23 12:33:36 -07:00
Masanari Iida 07f4225889 treewide: Fix typos in printk
Correct spelling typo in various drivers.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-20 16:26:32 +01:00
H Hartley Sweeten 460604850a drivers/ata: use module_pcmcia_driver() in pcmcia drivers
Use the new module_pcmcia_driver() macro to remove the boilerplate
module init/exit code in the pcmcia drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-15 12:26:03 -07:00
Jingoo Han b186affe0c pata_samsung_cf: use module_platform_driver_probe()
This patch uses module_platform_driver_probe() macro which makes
the code smaller and simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-03-04 17:12:52 -05:00
Aaron Lu e189551bf7 [libata] Avoid specialized TLA's in ZPODD's Kconfig
ODD is not a common TLA for non-ATA people so they will get confused
by its meaning when they are configuring the kernel. This patch fixed
this problem by using ODD only after stating what it is.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-03-04 17:12:46 -05:00
Sander Eikelenboom dfd573644c libata-acpi.c: fix copy and paste mistake in ata_acpi_register_power_resource
Fix a copy and paste mistake introduced in:

commit bc9b6407bd
"ACPI / PM: Rework the handling of devices depending on power resources"

Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-03-04 17:12:19 -05:00
Syam Sidhardhan c99cc9a2f1 sata_fsl: Remove redundant NULL check before kfree
kfree on NULL pointer is a no-op.

Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-03-04 17:11:54 -05:00
James Ralston efda332cb6 ahci: Add Device IDs for Intel Wellsburg PCH
This patch adds the RAID-mode SATA Device IDs for the Intel Wellsburg PCH

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-03-04 17:11:50 -05:00
Andrew Brownfield 79e7654cae ata_piix: Add MODULE_PARM_DESC to prefer_ms_hyperv
In reference to the commit cd006086fa
"ata_piix: defer disks to the Hyper-V drivers by default",
this trivial patch adds a description to prefer_ms_hyperv.

[rvrbovsk@redhat.com: MODULE_PARM_DESC() string formatting modified]

Signed-off-by: Andrew Brownfield <abrownfi@redhat.com>
Signed-off-by: Radomir Vrbovsky <rvrbovsk@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-03-04 17:10:32 -05:00
Rafael J. Wysocki 924144818c ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
After PCI and USB have stopped using the .find_bridge() callback in
struct acpi_bus_type, the only remaining user of it is SATA, but SATA
only pretends to be a user, because it points that callback to a stub
always returning -ENODEV.

For this reason, drop the SATA's dummy .find_bridge() callback and
remove .find_bridge(), which is not used any more, from struct
acpi_bus_type entirely.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
2013-03-04 14:23:40 +01:00