but instead the widening contributor base. It is good to see that
interest is increasing in GFS2, and I'd like to thank all the
contributors to this patch set.
In addition to the usual set of bug fixes and clean ups, there are
patches to improve inode creation performance when xattrs are
required and some improvements to the transaction code which is
intended to help improve scalability after further changes in due
course.
Journal extent mapping is also updated to make it more efficient
and again, this is a foundation for future work in this area.
The maximum number of ACLs has been increased to 300 (for a 4k
block size) which means that even with a few additional xattrs
from selinux, everything should fit within a single fs block.
There is also a patch to bring GFS2's own copy of the writepages
code up to the same level as the core VFS. Eventually we may be
able to merge some of this code, since it is fairly similar.
The other major change this time, is bringing consistency to
the printing of messages via fs_<level>, pr_<level> macros.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=IWmZ
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
Pull GFS2 updates from Steven Whitehouse:
"One of the main highlights this time, is not the patches themselves
but instead the widening contributor base. It is good to see that
interest is increasing in GFS2, and I'd like to thank all the
contributors to this patch set.
In addition to the usual set of bug fixes and clean ups, there are
patches to improve inode creation performance when xattrs are required
and some improvements to the transaction code which is intended to
help improve scalability after further changes in due course.
Journal extent mapping is also updated to make it more efficient and
again, this is a foundation for future work in this area.
The maximum number of ACLs has been increased to 300 (for a 4k block
size) which means that even with a few additional xattrs from selinux,
everything should fit within a single fs block.
There is also a patch to bring GFS2's own copy of the writepages code
up to the same level as the core VFS. Eventually we may be able to
merge some of this code, since it is fairly similar.
The other major change this time, is bringing consistency to the
printing of messages via fs_<level>, pr_<level> macros"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (29 commits)
GFS2: Fix address space from page function
GFS2: Fix uninitialized VFS inode in gfs2_create_inode
GFS2: Fix return value in slot_get()
GFS2: inline function gfs2_set_mode
GFS2: Remove extraneous function gfs2_security_init
GFS2: Increase the max number of ACLs
GFS2: Re-add a call to log_flush_wait when flushing the journal
GFS2: Ensure workqueue is scheduled after noexp request
GFS2: check NULL return value in gfs2_ok_to_move
GFS2: Convert gfs2_lm_withdraw to use fs_err
GFS2: Use fs_<level> more often
GFS2: Use pr_<level> more consistently
GFS2: Move recovery variables to journal structure in memory
GFS2: global conversion to pr_foo()
GFS2: return -E2BIG if hit the maximum limits of ACLs
GFS2: Clean up journal extent mapping
GFS2: replace kmalloc - __vmalloc / memset 0
GFS2: Remove extra "if" in gfs2_log_flush()
fs: NULL dereference in posix_acl_to_xattr()
GFS2: Move log buffer accounting to transaction
...
After commit 839a8e8660 ("writeback: replace custom worker pool
implementation with unbound workqueue") when device is removed while we
are writing to it we crash in bdi_writeback_workfn() ->
set_worker_desc() because bdi->dev is NULL.
This can happen because even though bdi_unregister() cancels all pending
flushing work, nothing really prevents new ones from being queued from
balance_dirty_pages() or other places.
Fix the problem by clearing BDI_registered bit in bdi_unregister() and
checking it before scheduling of any flushing work.
Fixes: 839a8e8660
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Derek Basehore <dbasehore@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
bdi_wakeup_thread_delayed() used the mod_delayed_work() function to
schedule work to writeback dirty inodes. The problem with this is that
it can delay work that is scheduled for immediate execution, such as the
work from sync_inodes_sb(). This can happen since mod_delayed_work()
can now steal work from a work_queue. This fixes the problem by using
queue_delayed_work() instead. This is a regression caused by commit
839a8e8660 ("writeback: replace custom worker pool implementation with
unbound workqueue").
The reason that this causes a problem is that laptop-mode will change
the delay, dirty_writeback_centisecs, to 60000 (10 minutes) by default.
In the case that bdi_wakeup_thread_delayed() races with
sync_inodes_sb(), sync will be stopped for 10 minutes and trigger a hung
task. Even if dirty_writeback_centisecs is not long enough to cause a
hung task, we still don't want to delay sync for that long.
We fix the problem by using queue_delayed_work() when we want to
schedule writeback sometime in future. This function doesn't change the
timer if it is already armed.
For the same reason, we also change bdi_writeback_workfn() to
immediately queue the work again in the case that the work_list is not
empty. The same problem can happen if the sync work is run on the
rescue worker.
[jack@suse.cz: update changelog, add comment, use bdi_wakeup_thread_delayed()]
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zento.linux.org.uk>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Derek Basehore <dbasehore@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Luigi Semenzato <semenzato@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit c4a391b53a. Dave
Chinner <david@fromorbit.com> has reported the commit may cause some
inodes to be left out from sync(2). This is because we can call
redirty_tail() for some inode (which sets i_dirtied_when to current time)
after sync(2) has started or similarly requeue_inode() can set
i_dirtied_when to current time if writeback had to skip some pages. The
real problem is in the functions clobbering i_dirtied_when but fixing
that isn't trivial so revert is a safer choice for now.
CC: stable@vger.kernel.org # >= 3.13
Signed-off-by: Jan Kara <jack@suse.cz>
GFS2 has carried what is more or less a copy of the
write_cache_pages() for some time. It seems that this
copy has slipped behind the core code over time. This
patch brings it back uptodate, and in addition adds the
tracepoint which would otherwise be missing.
We could go further, and eliminate some or all of the
code duplication here. The issue is that if we do that,
then the function we need to split out from the existing
write_cache_pages(), which will look a lot like
gfs2_jdata_write_pagevec(), would land up putting quite a
lot of extra variables on the stack. I know that has been
a problem in the past in the writeback code path, which
is why I've hesitated to do it here.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Commit 4f8ad655db "writeback: Refactor writeback_single_inode()" added
a condition to skip clean inode. However this is wrong in WB_SYNC_ALL
mode because there we also want to wait for outstanding writeback on
possibly clean inode. This was causing occasional data corruption issues
on NFS because it uses sync_inode() to make sure all outstanding writes
are flushed to the server before truncating the inode and with
sync_inode() returning prematurely file was sometimes extended back
by an outstanding write after it was truncated.
So modify the test to also check for pages under writeback in
WB_SYNC_ALL mode.
CC: stable@vger.kernel.org # >= 3.5
Fixes: 4f8ad655db
Reported-and-tested-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Merge first patch-bomb from Andrew Morton:
"Quite a lot of other stuff is banked up awaiting further
next->mainline merging, but this batch contains:
- Lots of random misc patches
- OCFS2
- Most of MM
- backlight updates
- lib/ updates
- printk updates
- checkpatch updates
- epoll tweaking
- rtc updates
- hfs
- hfsplus
- documentation
- procfs
- update gcov to gcc-4.7 format
- IPC"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (269 commits)
ipc, msg: fix message length check for negative values
ipc/util.c: remove unnecessary work pending test
devpts: plug the memory leak in kill_sb
./Makefile: export initial ramdisk compression config option
init/Kconfig: add option to disable kernel compression
drivers: w1: make w1_slave::flags long to avoid memory corruption
drivers/w1/masters/ds1wm.cuse dev_get_platdata()
drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page()
drivers/memstick/core/mspro_block.c: fix attributes array allocation
drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr
kernel/panic.c: reduce 1 byte usage for print tainted buffer
gcov: reuse kbasename helper
kernel/gcov/fs.c: use pr_warn()
kernel/module.c: use pr_foo()
gcov: compile specific gcov implementation based on gcc version
gcov: add support for gcc 4.7 gcov format
gcov: move gcov structs definitions to a gcc version specific file
kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener()
kernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_start() and nla_nest_end()
kernel/sysctl_binary.c: use scnprintf() instead of snprintf()
...
When there are processes heavily creating small files while sync(2) is
running, it can easily happen that quite some new files are created
between WB_SYNC_NONE and WB_SYNC_ALL pass of sync(2). That can happen
especially if there are several busy filesystems (remember that sync
traverses filesystems sequentially and waits in WB_SYNC_ALL phase on one
fs before starting it on another fs). Because WB_SYNC_ALL pass is slow
(e.g. causes a transaction commit and cache flush for each inode in
ext3), resulting sync(2) times are rather large.
The following script reproduces the problem:
function run_writers
{
for (( i = 0; i < 10; i++ )); do
mkdir $1/dir$i
for (( j = 0; j < 40000; j++ )); do
dd if=/dev/zero of=$1/dir$i/$j bs=4k count=4 &>/dev/null
done &
done
}
for dir in "$@"; do
run_writers $dir
done
sleep 40
time sync
Fix the problem by disregarding inodes dirtied after sync(2) was called
in the WB_SYNC_ALL pass. To allow for this, sync_inodes_sb() now takes
a time stamp when sync has started which is used for setting up work for
flusher threads.
To give some numbers, when above script is run on two ext4 filesystems
on simple SATA drive, the average sync time from 10 runs is 267.549
seconds with standard deviation 104.799426. With the patched kernel,
the average sync time from 10 runs is 2.995 seconds with standard
deviation 0.096.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
aka br_write_{lock,unlock} of vfsmount_lock. Inlines in fs/mount.h,
vfsmount_lock extern moved over there as well.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJSMwgMAAoJECvKgwp+S8JaiJUP/RGA98MkWnl5eio9mG5eEbF/
DC6bP5UOzPo+6oZbwH4LTc4EB04q728SSOU1nG6q1yfuSF0I1Kzt/Um6aS3P5wdk
okyYW1SjieE0xpmfQpvMEX6TZ7L/FpYjAg47GI0TaJMUdKRmJK0fkZ22hfv6uJzr
PMVmdJKKgxs85usrn4JyNY93xpKZgncJVuwpfFF1k9oSNIXHAk7OxT7JWj51UdqP
k/L/HXNhT3MRVvsjyqURHMIXfqRvqcgn47LAkM/IYVdgaFkpLPvwp8RZr/CcKr7U
KqJsQqqegRyoQ73yqgWXGAGLLXujKllsfKLu/d0vtqY2J4z6lHKTcRGpAGCDyH+3
bLe4hk+/d+Tz0xBSPaHryy/4yiQ4O+h9rLZCwGdxMX1duoqvThL9S8fLoUkrNBai
OU7cd4iWPlCmiquATjk0bgthCcKw3wlg+rsiSzUcaO3JbdwTp8P45Mie0ZtZ5jpa
UcczrT6osOAAswoEPMMeySQ+BVLewSPwmYKaETniYXB5Bb/IHkliX1MkXnA1D9bI
DNijgB2g2561BVhdkDHf2q8D4Cbrq6UhK7plATB90DB7bwNaAxmtRVJ3zDaQGKOM
VWBbloNf5QcodshEttj9ZLko7JNF/DjNOcNomb5ZtzY+EGzMksUHBUMPld3yOcna
LTNApshhbx92MemJ02FC
=FB22
-----END PGP SIGNATURE-----
Merge tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
Pull writeback fix from Wu Fengguang:
"A trivial writeback fix"
* tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: Do not sort b_io list only because of block device inode
There is a race between mark inode dirty and writeback thread, see the
following scenario. In this case, writeback thread will not run though
there is dirty_io.
__mark_inode_dirty() bdi_writeback_workfn()
... ...
spin_lock(&inode->i_lock);
...
if (bdi_cap_writeback_dirty(bdi)) {
<<< assume wb has dirty_io, so wakeup_bdi is false.
<<< the following inode_dirty also have wakeup_bdi false.
if (!wb_has_dirty_io(&bdi->wb))
wakeup_bdi = true;
}
spin_unlock(&inode->i_lock);
<<< assume last dirty_io is removed here.
pages_written = wb_do_writeback(wb);
...
<<< work_list empty and wb has no dirty_io,
<<< delayed_work will not be queued.
if (!list_empty(&bdi->work_list) ||
(wb_has_dirty_io(wb) && dirty_writeback_interval))
queue_delayed_work(bdi_wq, &wb->dwork,
msecs_to_jiffies(dirty_writeback_interval * 10));
spin_lock(&bdi->wb.list_lock);
inode->dirtied_when = jiffies;
<<< new dirty_io is added.
list_move(&inode->i_wb_list, &bdi->wb.b_dirty);
spin_unlock(&bdi->wb.list_lock);
<<< though there is dirty_io, but wakeup_bdi is false,
<<< so writeback thread will not be waked up and
<<< the new dirty_io will not be flushed.
if (wakeup_bdi)
bdi_wakeup_thread_delayed(bdi);
Writeback will run until there is a new flush work queued. This may cause
a lot of dirty pages stay in memory for a long time.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's not used globally and could be static.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case when system contains no dirty pages, wakeup_flusher_threads() will
submit WB_SYNC_NONE writeback for 0 pages so wb_writeback() exits
immediately without doing anything, even though there are dirty inodes in
the system. Thus sync(1) will write all the dirty inodes from a
WB_SYNC_ALL writeback pass which is slow.
Fix the problem by using get_nr_dirty_pages() in wakeup_flusher_threads()
instead of calculating number of dirty pages manually. That function also
takes number of dirty inodes into account.
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Paul Taysom <taysom@chromium.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After commit 839a8e8660 ("writeback: replace custom worker pool
implementation with unbound workqueue"), bdi_writeback_workfn runs off
bdi_writeback->dwork, on each execution, it processes bdi->work_list and
reschedules if there are more things to do instead of flush any work
that race with us existing. It is unecessary to check force_wait in
wb_do_writeback since it is always 0 after the mentioned commit. This
patch remove the force_wait in wb_do_writeback.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's not used globally and could be static.
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is very likely that block device inode will be part of BDI dirty list
as well. However it doesn't make sence to sort inodes on the b_io list
just because of this inode (as it contains buffers all over the device
anyway). So save some CPU cycles which is valuable since we hold relatively
contented wb->list_lock.
Signed-off-by: Jan Kara <jack@suse.cz>
When sync does it's WB_SYNC_ALL writeback, it issues data Io and
then immediately waits for IO completion. This is done in the
context of the flusher thread, and hence completely ties up the
flusher thread for the backing device until all the dirty inodes
have been synced. On filesystems that are dirtying inodes constantly
and quickly, this means the flusher thread can be tied up for
minutes per sync call and hence badly affect system level write IO
performance as the page cache cannot be cleaned quickly.
We already have a wait loop for IO completion for sync(2), so cut
this out of the flusher thread and delegate it to wait_sb_inodes().
Hence we can do rapid IO submission, and then wait for it all to
complete.
Effect of sync on fsmark before the patch:
FSUse% Count Size Files/sec App Overhead
.....
0 640000 4096 35154.6 1026984
0 720000 4096 36740.3 1023844
0 800000 4096 36184.6 916599
0 880000 4096 1282.7 1054367
0 960000 4096 3951.3 918773
0 1040000 4096 40646.2 996448
0 1120000 4096 43610.1 895647
0 1200000 4096 40333.1 921048
And a single sync pass took:
real 0m52.407s
user 0m0.000s
sys 0m0.090s
After the patch, there is no impact on fsmark results, and each
individual sync(2) operation run concurrently with the same fsmark
workload takes roughly 7s:
real 0m6.930s
user 0m0.000s
sys 0m0.039s
IOWs, sync is 7-8x faster on a busy filesystem and does not have an
adverse impact on ongoing async data write operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull block core updates from Jens Axboe:
- Major bit is Kents prep work for immutable bio vecs.
- Stable candidate fix for a scheduling-while-atomic in the queue
bypass operation.
- Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging
discard bios.
- Tejuns changes to convert the writeback thread pool to the generic
workqueue mechanism.
- Runtime PM framework, SCSI patches exists on top of these in James'
tree.
- A few random fixes.
* 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits)
relay: move remove_buf_file inside relay_close_buf
partitions/efi.c: replace useless kzalloc's by kmalloc's
fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read()
block: fix max discard sectors limit
blkcg: fix "scheduling while atomic" in blk_queue_bypass_start
Documentation: cfq-iosched: update documentation help for cfq tunables
writeback: expose the bdi_wq workqueue
writeback: replace custom worker pool implementation with unbound workqueue
writeback: remove unused bdi_pending_list
aoe: Fix unitialized var usage
bio-integrity: Add explicit field for owner of bip_buf
block: Add an explicit bio flag for bios that own their bvec
block: Add bio_alloc_pages()
block: Convert some code to bio_for_each_segment_all()
block: Add bio_for_each_segment_all()
bounce: Refactor __blk_queue_bounce to not use bi_io_vec
raid1: use bio_copy_data()
pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage
pktcdvd: use bio_copy_data()
block: Add bio_copy_data()
...
Writeback has been recently converted to use workqueue instead of its
private thread pool implementation. One negative side effect of this
conversion is that there's no easy to tell which backing device a
writeback work item was working on at the time of task dump, be it
sysrq-t, BUG, WARN or whatever, which, according to our writeback
brethren, is important in tracking down issues with a lot of mounted
file systems on a lot of different devices.
This patch restores that information using the new worker description
facility. bdi_writeback_workfn() calls set_work_desc() to identify
which bdi it's working on. The description is printed out together with
the worqueue name and worker function as in the following example dump.
WARNING: at fs/fs-writeback.c:1015 bdi_writeback_workfn+0x2b4/0x3c0()
Modules linked in:
Pid: 28, comm: kworker/u18:0 Not tainted 3.9.0-rc1-work+ #24 empty empty/S3992
Workqueue: writeback bdi_writeback_workfn (flush-8:16)
ffffffff820a3a98 ffff88015b927cb8 ffffffff81c61855 ffff88015b927cf8
ffffffff8108f500 0000000000000000 ffff88007a171948 ffff88007a1716b0
ffff88015b49df00 ffff88015b8d3940 0000000000000000 ffff88015b927d08
Call Trace:
[<ffffffff81c61855>] dump_stack+0x19/0x1b
[<ffffffff8108f500>] warn_slowpath_common+0x70/0xa0
[<ffffffff8108f54a>] warn_slowpath_null+0x1a/0x20
[<ffffffff81200144>] bdi_writeback_workfn+0x2b4/0x3c0
[<ffffffff810b4c87>] process_one_work+0x1d7/0x660
[<ffffffff810b5c72>] worker_thread+0x122/0x380
[<ffffffff810bdfea>] kthread+0xea/0xf0
[<ffffffff81c6cedc>] ret_from_fork+0x7c/0xb0
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Writeback implements its own worker pool - each bdi can be associated
with a worker thread which is created and destroyed dynamically. The
worker thread for the default bdi is always present and serves as the
"forker" thread which forks off worker threads for other bdis.
there's no reason for writeback to implement its own worker pool when
using unbound workqueue instead is much simpler and more efficient.
This patch replaces custom worker pool implementation in writeback
with an unbound workqueue.
The conversion isn't too complicated but the followings are worth
mentioning.
* bdi_writeback->last_active, task and wakeup_timer are removed.
delayed_work ->dwork is added instead. Explicit timer handling is
no longer necessary. Everything works by either queueing / modding
/ flushing / canceling the delayed_work item.
* bdi_writeback_thread() becomes bdi_writeback_workfn() which runs off
bdi_writeback->dwork. On each execution, it processes
bdi->work_list and reschedules itself if there are more things to
do.
The function also handles low-mem condition, which used to be
handled by the forker thread. If the function is running off a
rescuer thread, it only writes out limited number of pages so that
the rescuer can serve other bdis too. This preserves the flusher
creation failure behavior of the forker thread.
* INIT_LIST_HEAD(&bdi->bdi_list) is used to tell
bdi_writeback_workfn() about on-going bdi unregistration so that it
always drains work_list even if it's running off the rescuer. Note
that the original code was broken in this regard. Under memory
pressure, a bdi could finish unregistration with non-empty
work_list.
* The default bdi is no longer special. It now is treated the same as
any other bdi and bdi_cap_flush_forker() is removed.
* BDI_pending is no longer used. Removed.
* Some tracepoints become non-applicable. The following TPs are
removed - writeback_nothread, writeback_wake_thread,
writeback_wake_forker_thread, writeback_thread_start,
writeback_thread_stop.
Everything, including devices coming and going away and rescuer
operation under simulated memory pressure, seems to work fine in my
test setup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Add tracepoints for page dirtying, writeback_single_inode start, inode
dirtying and writeback. For the latter two inode events, a pair of
events are defined to denote start and end of the operations (the
starting one has _start suffix and the one w/o suffix happens after
the operation is complete). These inode ops are FS specific and can
be non-trivial and having enclosing tracepoints is useful for external
tracers.
This is part of tracepoint additions to improve visiblity into
dirtying / writeback operations for io tracer and userland.
v2: writeback_dirty_inode[_start] TPs may be called for files on
pseudo FSes w/ unregistered bdi. Check whether bdi->dev is %NULL
before dereferencing.
v3: buffer dirtying moved to a block TP.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
writeback_inodes_sb(_nr)_if_idle() is re-implemented by replacing down_read()
with down_read_trylock() because
- If ->s_umount is write locked, then the sb is not idle. That is
writeback_inodes_sb(_nr)_if_idle() needn't wait for the lock.
- writeback_inodes_sb(_nr)_if_idle() grabs s_umount lock when it want to start
writeback, it may bring us deadlock problem when doing umount. In order to
fix the problem, ext4 and btrfs implemented their own writeback functions
instead of writeback_inodes_sb(_nr)_if_idle(), but it introduced the redundant
code, it is better to implement a new writeback_inodes_sb(_nr)_if_idle().
The name of these two functions is cumbersome, so rename them to
try_to_writeback_inodes_sb(_nr).
This idea came from Christoph Hellwig.
Some code is from the patch of Kamal Mostafa.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Yan Hong <clouds.yan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 169ebd9013 ("writeback: Avoid iput() from flusher thread")
removed iget-iput pair from inode writeback. As a side effect, inodes
that are dirty during iput_final() call won't be ever added to inode LRU
(iput_final() doesn't add dirty inodes to LRU and later when the inode
is cleaned there's noone to add the inode there). Thus inodes are
effectively unreclaimable until someone looks them up again.
The practical effect of this bug is limited by the fact that inodes are
pinned by a dentry for long enough that the inode gets cleaned. But
still the bug can have nasty consequences leading up to OOM conditions
under certain circumstances. Following can easily reproduce the
problem:
for (( i = 0; i < 1000; i++ )); do
mkdir $i
for (( j = 0; j < 1000; j++ )); do
touch $i/$j
echo 2 > /proc/sys/vm/drop_caches
done
done
then one needs to run 'sync; ls -lR' to make inodes reclaimable again.
We fix the issue by inserting unused clean inodes into the LRU after
writeback finishes in inode_sync_complete().
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: <stable@vger.kernel.org> [3.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull writeback fixes from Fengguang Wu:
"Three trivial writeback fixes"
* 'writeback-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
CPU hotplug, writeback: Don't call writeback_set_ratelimit() too often during hotplug
writeback: correct comment for move_expired_inodes()
backing-dev: use kstrto* in preference to simple_strtoul
The parameter 'wb' is never used in this function.
Signed-off-by: Yan Hong <clouds.yan@gmail.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
using the meta_bg feature. This allows us to resize file systems
which are greater than 16TB. In addition, the speed of online
resizing has been improved in general.
We also fix a number of races, some of which could lead to deadlocks,
in ext4's Asynchronous I/O and online defrag support, thanks to good
work by Dmitry Monakhov.
There are also a large number of more minor bug fixes and cleanups
from a number of other ext4 contributors, quite of few of which have
submitted fixes for the first time.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=iYeV
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The big new feature added this time is supporting online resizing
using the meta_bg feature. This allows us to resize file systems
which are greater than 16TB. In addition, the speed of online
resizing has been improved in general.
We also fix a number of races, some of which could lead to deadlocks,
in ext4's Asynchronous I/O and online defrag support, thanks to good
work by Dmitry Monakhov.
There are also a large number of more minor bug fixes and cleanups
from a number of other ext4 contributors, quite of few of which have
submitted fixes for the first time."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (69 commits)
ext4: fix ext4_flush_completed_IO wait semantics
ext4: fix mtime update in nodelalloc mode
ext4: fix ext_remove_space for punch_hole case
ext4: punch_hole should wait for DIO writers
ext4: serialize truncate with owerwrite DIO workers
ext4: endless truncate due to nonlocked dio readers
ext4: serialize unlocked dio reads with truncate
ext4: serialize dio nonlocked reads with defrag workers
ext4: completed_io locking cleanup
ext4: fix unwritten counter leakage
ext4: give i_aiodio_unwritten a more appropriate name
ext4: ext4_inode_info diet
ext4: convert to use leXX_add_cpu()
ext4: ext4_bread usage audit
fs: reserve fallocate flag codepoint
ext4: remove redundant offset check in mext_check_arguments()
ext4: don't clear orphan list on ro mount with errors
jbd2: fix assertion failure in commit code due to lacking transaction credits
ext4: release donor reference when EXT4_IOC_MOVE_EXT ioctl fails
ext4: enable FITRIM ioctl on bigalloc file system
...
Pull the trivial tree from Jiri Kosina:
"Tiny usual fixes all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
doc: fix old config name of kprobetrace
fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
btrfs: fix the commment for the action flags in delayed-ref.h
btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
vfs: fix kerneldoc for generic_fh_to_parent()
treewide: fix comment/printk/variable typos
ipr: fix small coding style issues
doc: fix broken utf8 encoding
nfs: comment fix
platform/x86: fix asus_laptop.wled_type module parameter
mfd: printk/comment fixes
doc: getdelays.c: remember to close() socket on error in create_nl_socket()
doc: aliasing-test: close fd on write error
mmc: fix comment typos
dma: fix comments
spi: fix comment/printk typos in spi
Coccinelle: fix typo in memdup_user.cocci
tmiofb: missing NULL pointer checks
tools: perf: Fix typo in tools/perf
tools/testing: fix comment / output typos
...
In ext4_nonda_switch(), if the file system is getting full we used to
call writeback_inodes_sb_if_idle(). The problem is that we can be
holding i_mutex already, and this causes a potential deadlock when
writeback_inodes_sb_if_idle() when it tries to take s_umount. (See
lockdep output below).
As it turns out we don't need need to hold s_umount; the fact that we
are in the middle of the write(2) system call will keep the superblock
pinned. Unfortunately writeback_inodes_sb() checks to make sure
s_umount is taken, and the VFS uses a different mechanism for making
sure the file system doesn't get unmounted out from under us. The
simplest way of dealing with this is to just simply grab s_umount
using a trylock, and skip kicking the writeback flusher thread in the
very unlikely case that we can't take a read lock on s_umount without
blocking.
Also, we now check the cirteria for kicking the writeback thread
before we decide to whether to fall back to non-delayed writeback, so
if there are any outstanding delayed allocation writes, we try to get
them resolved as soon as possible.
[ INFO: possible circular locking dependency detected ]
3.6.0-rc1-00042-gce894ca #367 Not tainted
-------------------------------------------------------
dd/8298 is trying to acquire lock:
(&type->s_umount_key#18){++++..}, at: [<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46
but task is already holding lock:
(&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3
which lock already depends on the new lock.
2 locks held by dd/8298:
#0: (sb_writers#2){.+.+.+}, at: [<c01ddcc5>] generic_file_aio_write+0x56/0xd3
#1: (&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3
stack backtrace:
Pid: 8298, comm: dd Not tainted 3.6.0-rc1-00042-gce894ca #367
Call Trace:
[<c015b79c>] ? console_unlock+0x345/0x372
[<c06d62a1>] print_circular_bug+0x190/0x19d
[<c019906c>] __lock_acquire+0x86d/0xb6c
[<c01999db>] ? mark_held_locks+0x5c/0x7b
[<c0199724>] lock_acquire+0x66/0xb9
[<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46
[<c06db935>] down_read+0x28/0x58
[<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46
[<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46
[<c026f3b2>] ext4_nonda_switch+0xe1/0xf4
[<c0271ece>] ext4_da_write_begin+0x27/0x193
[<c01dcdb0>] generic_file_buffered_write+0xc8/0x1bb
[<c01ddc47>] __generic_file_aio_write+0x1dd/0x205
[<c01ddce7>] generic_file_aio_write+0x78/0xd3
[<c026d336>] ext4_file_write+0x480/0x4a6
[<c0198c1d>] ? __lock_acquire+0x41e/0xb6c
[<c0180944>] ? sched_clock_cpu+0x11a/0x13e
[<c01967e9>] ? trace_hardirqs_off+0xb/0xd
[<c018099f>] ? local_clock+0x37/0x4e
[<c0209f2c>] do_sync_write+0x67/0x9d
[<c0209ec5>] ? wait_on_retry_sync_kiocb+0x44/0x44
[<c020a7b9>] vfs_write+0x7b/0xe6
[<c020a9a6>] sys_write+0x3b/0x64
[<c06dd4bd>] syscall_call+0x7/0xb
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
The function scans @delaying_queue and stops at the first inode
whose dirtied_when is after *work->older_than_this. So the expired
ones being moved are those before *work->older_than_this. Correct
the comment here.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Since per-BDI flusher threads were introduced in 2.6, the pdflush
mechanism is not used any more. But the old interface exported through
/proc/sys/vm/nr_pdflush_threads still exists and is obviously useless.
For back-compatibility, printk warning information and return 2 to notify
the users that the interface is removed.
Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
which can adapt equally well to fast/slow devices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=gZrM
-----END PGP SIGNATURE-----
Merge tag 'writeback-proportions' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
Pull writeback updates from Wu Fengguang:
"Use time based periods to age the writeback proportions, which can
adapt equally well to fast/slow devices."
Fix up trivial conflict in comment in fs/sync.c
* tag 'writeback-proportions' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: Fix some comment errors
block: Convert BDI proportion calculations to flexible proportions
lib: Fix possible deadlock in flexible proportion code
lib: Proportions with flexible period
In principle, a filesystem may want to have ->sync_fs() called during sync(1)
although it does not have a bdi (i.e. s_bdi is set to noop_backing_dev_info).
Only writeback code really needs bdi set to something reasonable. So move the
checks where they are more logical.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix bug introduced by 169ebd90. We have to have wb_list_lock locked when
restarting writeback loop after having waited for inode writeback.
Bug description by Ted Tso:
I can reproduce this fairly easily by using ext4 w/o a journal, running
under KVM with 1024megs memory, with fsstress (xfstests #13):
[ 45.153294] =====================================
[ 45.154784] [ BUG: bad unlock balance detected! ]
[ 45.155591] 3.5.0-rc1-00002-gb22b1f1 #124 Not tainted
[ 45.155591] -------------------------------------
[ 45.155591] flush-254:16/2499 is trying to release lock (&(&wb->list_lock)->rlock) at:
[ 45.155591] [<c022c3da>] writeback_sb_inodes+0x160/0x327
[ 45.155591] but there are no more locks to release!
Reported-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Doing iput() from flusher thread (writeback_sb_inodes()) can create problems
because iput() can do a lot of work - for example truncate the inode if it's
the last iput on unlinked file. Some filesystems depend on flusher thread
progressing (e.g. because they need to flush delay allocated blocks to reduce
allocation uncertainty) and so flusher thread doing truncate creates
interesting dependencies and possibilities for deadlocks.
We get rid of iput() in flusher thread by using the fact that I_SYNC inode
flag effectively pins the inode in memory. So if we take care to either hold
i_lock or have I_SYNC set, we can get away without taking inode reference
in writeback_sb_inodes().
As a side effect of these changes, we also fix possible use-after-free in
wb_writeback() because inode_wait_for_writeback() call could try to reacquire
i_lock on the inode that was already free.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
The code in writeback_single_inode() is relatively complex. The list requeing
logic makes sense only for flusher thread but not really for sync_inode() or
write_inode_now() callers. Also when we want to get rid of inode references
held by flusher thread, we will need a special I_SYNC handling there.
So separate part of writeback_single_inode() which does the real writeback work
into __writeback_single_inode() and make writeback_single_inode() do only stuff
necessary for callers writing only one inode, moving the special list handling
into writeback_sb_inodes(). As a sideeffect this fixes a possible race where we
could skip some inode during sync(2) because other writer refiled it from b_io
to b_dirty list. Also I_SYNC handling is moved into the callers of
__writeback_single_inode() to make locking easier.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
writeback_single_inode() doesn't need wb->list_lock for anything on entry now.
So remove the requirement. This makes locking of writeback_single_inode()
temporarily awkward (entering with i_lock, returning with i_lock and
wb->list_lock) but it will be sanitized in the next patch.
Also inode_wait_for_writeback() doesn't need wb->list_lock for anything. It was
just taking it to make usage convenient for callers but with
writeback_single_inode() changing it's not very convenient anymore. So remove
the lock from that function.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Move inode requeueing after inode has been written out into a separate
function.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Instead of clearing I_DIRTY_PAGES and resetting it when we didn't succeed in
writing them all, just clear the bit only when we succeeded writing all the
pages. We also move the clearing of the bit close to other i_state handling to
separate it from writeback list handling. This is desirable because list
handling will differ for flusher thread and other writeback_single_inode()
callers in future. No filesystem plays any tricks with I_DIRTY_PAGES (like
checking it in ->writepages or ->write_inode implementation) so this movement
is safe.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
When writeback_single_inode() is called on inode which has I_SYNC already
set while doing WB_SYNC_NONE, inode is moved to b_more_io list. However
this makes sense only if the caller is flusher thread. For other callers of
writeback_single_inode() it doesn't really make sense and may be even wrong
- flusher thread may be doing WB_SYNC_ALL writeback in parallel.
So we move requeueing from writeback_single_inode() to writeback_sb_inodes().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Move clearing of I_SYNC into inode_sync_complete(). It is more logical to have
clearing of I_SYNC bit and waking of waiters in one place. Also later we will
have two places needing to clear I_SYNC and wake up waiters so this allows them
to use the common helper. Moving of I_SYNC clearing to a later stage of
writeback_single_inode() is safe since we hold i_lock all the time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
"[PATCH 0/3] RFC - module.h usage cleanups in fs/ and lib/"
https://lkml.org/lkml/2012/2/29/589
--
Fix up files in fs/ and lib/ dirs to only use module.h if they really
need it.
These are trivial in scope vs. the work done previously. We now have
things where any few remaining cleanups can be farmed out to arch or
subsystem maintainers, and I have done so when possible. What is
remaining here represents the bits that don't clearly lie within a
single arch/subsystem boundary, like the fs dir and the lib dir.
Some duplicate includes arising from overlapping fixes from
independent subsystem maintainer submissions are also quashed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Z4w0
-----END PGP SIGNATURE-----
Merge tag 'module-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull cleanup of fs/ and lib/ users of module.h from Paul Gortmaker:
"Fix up files in fs/ and lib/ dirs to only use module.h if they really
need it.
These are trivial in scope vs the work done previously. We now have
things where any few remaining cleanups can be farmed out to arch or
subsystem maintainers, and I have done so when possible. What is
remaining here represents the bits that don't clearly lie within a
single arch/subsystem boundary, like the fs dir and the lib dir.
Some duplicate includes arising from overlapping fixes from
independent subsystem maintainer submissions are also quashed."
Fix up trivial conflicts due to clashes with other include file cleanups
(including some due to the previous bug.h cleanup pull).
* tag 'module-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
lib: reduce the use of module.h wherever possible
fs: reduce the use of module.h wherever possible
includecheck: delete any duplicate instances of module.h
The comment is hopelessly outdated and misplaced. We no longer have 'bdi'
part of writeback work, the comment about blockdev super is outdated,
comment about throttling as well. Information about list handling is in
more detail at queue_io(). So just move the bit about older_than_this to
close to move_expired_inodes() and remove the rest.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
inode_sync_wait() in write_inode_now() is just bogus. That function waits for
I_SYNC bit to be cleared but writeback_single_inode() clears the bit on return
so the wait is effectivelly a nop unless someone else submits the inode for
writeback again. All the waiting write_inode_now() needs is achieved by using
WB_SYNC_ALL writeback mode.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Pull trivial tree from Jiri Kosina:
"It's indeed trivial -- mostly documentation updates and a bunch of
typo fixes from Masanari.
There are also several linux/version.h include removals from Jesper."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
kcore: fix spelling in read_kcore() comment
constify struct pci_dev * in obvious cases
Revert "char: Fix typo in viotape.c"
init: fix wording error in mm_init comment
usb: gadget: Kconfig: fix typo for 'different'
Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
writeback: fix typo in the writeback_control comment
Documentation: Fix multiple typo in Documentation
tpm_tis: fix tis_lock with respect to RCU
Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
Doc: Update numastat.txt
qla4xxx: Add missing spaces to error messages
compiler.h: Fix typo
security: struct security_operations kerneldoc fix
Documentation: broken URL in libata.tmpl
Documentation: broken URL in filesystems.tmpl
mtd: simplify return logic in do_map_probe()
mm: fix comment typo of truncate_inode_pages_range
power: bq27x00: Fix typos in comment
...
For files only using THIS_MODULE and/or EXPORT_SYMBOL, map
them onto including export.h -- or if the file isn't even
using those, then just delete the include. Fix up any implicit
include dependencies that were being masked by module.h along
the way.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
bdi_prune_sb() resets sb->s_bdi to default_backing_dev_info when the
tearing down the original bdi. Fix trace_writeback_single_inode to
use sb->s_bdi=default_backing_dev_info rather than bdi->dev=NULL for a
teared down bdi.
Cc: <stable@kernel.org>
Reported-by: Rabin Vincent <rabin@rab.in>
Tested-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
PM / Hibernate: Implement compat_ioctl for /dev/snapshot
PM / Freezer: fix return value of freezable_schedule_timeout_killable()
PM / shmobile: Allow the A4R domain to be turned off at run time
PM / input / touchscreen: Make st1232 use device PM QoS constraints
PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
PM / shmobile: Remove the stay_on flag from SH7372's PM domains
PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume
PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode
PM: Drop generic_subsys_pm_ops
PM / Sleep: Remove forward-only callbacks from AMBA bus type
PM / Sleep: Remove forward-only callbacks from platform bus type
PM: Run the driver callback directly if the subsystem one is not there
PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
PM / Sleep: Merge internal functions in generic_ops.c
PM / Sleep: Simplify generic system suspend callbacks
PM / Hibernate: Remove deprecated hibernation snapshot ioctls
PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
ARM: S3C64XX: Implement basic power domain support
PM / shmobile: Use common always on power domain governor
...
Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused
XBT_FORCE_SLEEP bit
Fix compile error
fs/fs-writeback.c:515:33: error: ‘PAGE_CACHE_SHIFT’ undeclared (first use in this function)
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Move invalidate_bdev, block_sync_page into fs/block_dev.c. Export
kill_bdev as well, so brd doesn't have to open code it. Reduce
buffer_head.h requirement accordingly.
Removed a rather large comment from invalidate_bdev, as it looked a bit
obsolete to bother moving. The small comment replacing it says enough.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* pm-sleep: (51 commits)
PM: Drop generic_subsys_pm_ops
PM / Sleep: Remove forward-only callbacks from AMBA bus type
PM / Sleep: Remove forward-only callbacks from platform bus type
PM: Run the driver callback directly if the subsystem one is not there
PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
PM / Sleep: Merge internal functions in generic_ops.c
PM / Sleep: Simplify generic system suspend callbacks
PM / Hibernate: Remove deprecated hibernation snapshot ioctls
PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
PM / Sleep: Recommend [un]lock_system_sleep() over using pm_mutex directly
PM / Sleep: Replace mutex_[un]lock(&pm_mutex) with [un]lock_system_sleep()
PM / Sleep: Make [un]lock_system_sleep() generic
PM / Sleep: Use the freezer_count() functions in [un]lock_system_sleep() APIs
PM / Freezer: Remove the "userspace only" constraint from freezer[_do_not]_count()
PM / Hibernate: Replace unintuitive 'if' condition in kernel/power/user.c with 'else'
Freezer / sunrpc / NFS: don't allow TASK_KILLABLE sleeps to block the freezer
PM / Sleep: Unify diagnostic messages from device suspend/resume
ACPI / PM: Do not save/restore NVS on Asus K54C/K54HR
PM / Hibernate: Remove deprecated hibernation test modes
PM / Hibernate: Thaw processes in SNAPSHOT_CREATE_IMAGE ioctl test path
...
Conflicts:
kernel/kmod.c
* master: (848 commits)
SELinux: Fix RCU deref check warning in sel_netport_insert()
binary_sysctl(): fix memory leak
mm/vmalloc.c: remove static declaration of va from __get_vm_area_node
ipmi_watchdog: restore settings when BMC reset
oom: fix integer overflow of points in oom_badness
memcg: keep root group unchanged if creation fails
nilfs2: potential integer overflow in nilfs_ioctl_clean_segments()
nilfs2: unbreak compat ioctl
cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask
evm: prevent racing during tfm allocation
evm: key must be set once during initialization
mmc: vub300: fix type of firmware_rom_wait_states module parameter
Revert "mmc: enable runtime PM by default"
mmc: sdhci: remove "state" argument from sdhci_suspend_host
x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT
IB/qib: Correct sense on freectxts increment and decrement
RDMA/cma: Verify private data length
cgroups: fix a css_set not found bug in cgroup_attach_proc
oprofile: Fix uninitialized memory access when writing to writing to oprofilefs
Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel"
...
Conflicts:
kernel/cgroup_freezer.c
Current livelock avoidance code makes background work to include only inodes
that were dirtied before background writeback has started. However background
writeback can be running for a long time and thus excluding newly dirtied
inodes can eventually exclude significant portion of dirty inodes making
background writeback inefficient. Since background writeback avoids livelocking
the flusher thread by yielding to any other work, there is no real reason why
background work should not include all dirty inodes so change the logic in
wb_writeback().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
This makes the binary trace understandable by trace-cmd.
CC: Dave Chinner <david@fromorbit.com>
CC: Curt Wohlgemuth <curtw@google.com>
CC: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Document the @reason parameter to make "make htmldocs" happy.
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Writeback and thinkpad_acpi have been using thaw_process() to prevent
deadlock between the freezer and kthread_stop(); unfortunately, this
is inherently racy - nothing prevents freezing from happening between
thaw_process() and kthread_stop().
This patch implements kthread_freezable_should_stop() which enters
refrigerator if necessary but is guaranteed to return if
kthread_stop() is invoked. Both thaw_process() users are converted to
use the new function.
Note that this deadlock condition exists for many of freezable
kthreads. They need to be converted to use the new should_stop or
freezable workqueue.
Tested with synthetic test case.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
This creates a new 'reason' field in a wb_writeback_work
structure, which unambiguously identifies who initiates
writeback activity. A 'wb_reason' enumeration has been
added to writeback.h, to enumerate the possible reasons.
The 'writeback_work_class' and tracepoint event class and
'writeback_queue_io' tracepoints are updated to include the
symbolic 'reason' in all trace events.
And the 'writeback_inodes_sbXXX' family of routines has had
a wb_stats parameter added to them, so callers can specify
why writeback is being started.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Instead of sending ->older_than_this to queue_io() and
move_expired_inodes(), send the entire wb_writeback_work
structure. There are other fields of a work item that are
useful in these routines and in tracepoints.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
One thing puzzled me is that in JBOD case, the per-disk writeout
performance is smaller than the corresponding single-disk case even
when they have comparable bdi_thresh. Tracing shows find that in single
disk case, bdi_writeback is always kept high while in JBOD case, it
could drop low from time to time and correspondingly bdi_reclaimable
could sometimes rush high.
The fix is to watch bdi_reclaimable and kick background writeback as
soon as it goes high. This resembles the global background threshold
but in per-bdi manner. The trick is, as long as bdi_reclaimable does
not go high, bdi_writeback naturally won't go low because
bdi_reclaimable+bdi_writeback ~= bdi_thresh.
With less fluctuated writeback pages, JBOD performance is observed to
increase noticeably in various cases.
vmstat:nr_written values before/after patch:
3.1.0-rc4-wo-underrun+ 3.1.0-rc4-bgthresh3+
------------------------ ------------------------
125596480 +25.9% 158179363 JBOD-10HDD-16G/ext4-100dd-1M-24p-16384M-20:10-X
61790815 +110.4% 130032231 JBOD-10HDD-16G/ext4-10dd-1M-24p-16384M-20:10-X
58853546 -0.1% 58823828 JBOD-10HDD-16G/ext4-1dd-1M-24p-16384M-20:10-X
110159811 +24.7% 137355377 JBOD-10HDD-16G/xfs-100dd-1M-24p-16384M-20:10-X
69544762 +10.8% 77080047 JBOD-10HDD-16G/xfs-10dd-1M-24p-16384M-20:10-X
50644862 +0.5% 50890006 JBOD-10HDD-16G/xfs-1dd-1M-24p-16384M-20:10-X
42677090 +28.0% 54643527 JBOD-10HDD-thresh=100M/ext4-100dd-1M-24p-16384M-100M:10-X
47491324 +13.3% 53785605 JBOD-10HDD-thresh=100M/ext4-10dd-1M-24p-16384M-100M:10-X
52548986 +0.9% 53001031 JBOD-10HDD-thresh=100M/ext4-1dd-1M-24p-16384M-100M:10-X
26783091 +36.8% 36650248 JBOD-10HDD-thresh=100M/xfs-100dd-1M-24p-16384M-100M:10-X
35526347 +14.0% 40492312 JBOD-10HDD-thresh=100M/xfs-10dd-1M-24p-16384M-100M:10-X
44670723 -1.1% 44177606 JBOD-10HDD-thresh=100M/xfs-1dd-1M-24p-16384M-100M:10-X
127996037 +22.4% 156719990 JBOD-10HDD-thresh=2G/ext4-100dd-1M-24p-16384M-2048M:10-X
57518856 +3.8% 59677625 JBOD-10HDD-thresh=2G/ext4-10dd-1M-24p-16384M-2048M:10-X
51919909 +12.2% 58269894 JBOD-10HDD-thresh=2G/ext4-1dd-1M-24p-16384M-2048M:10-X
86410514 +79.0% 154660433 JBOD-10HDD-thresh=2G/xfs-100dd-1M-24p-16384M-2048M:10-X
40132519 +38.6% 55617893 JBOD-10HDD-thresh=2G/xfs-10dd-1M-24p-16384M-2048M:10-X
48423248 +7.5% 52042927 JBOD-10HDD-thresh=2G/xfs-1dd-1M-24p-16384M-2048M:10-X
206041046 +44.1% 296846536 JBOD-10HDD-thresh=4G/xfs-100dd-1M-24p-16384M-4096M:10-X
72312903 -19.4% 58272885 JBOD-10HDD-thresh=4G/xfs-10dd-1M-24p-16384M-4096M:10-X
50635672 -0.5% 50384787 JBOD-10HDD-thresh=4G/xfs-1dd-1M-24p-16384M-4096M:10-X
68308534 +115.7% 147324758 JBOD-10HDD-thresh=800M/ext4-100dd-1M-24p-16384M-800M:10-X
57882933 +14.5% 66269621 JBOD-10HDD-thresh=800M/ext4-10dd-1M-24p-16384M-800M:10-X
52183472 +12.8% 58855181 JBOD-10HDD-thresh=800M/ext4-1dd-1M-24p-16384M-800M:10-X
53788956 +94.2% 104460352 JBOD-10HDD-thresh=800M/xfs-100dd-1M-24p-16384M-800M:10-X
44493342 +35.5% 60298210 JBOD-10HDD-thresh=800M/xfs-10dd-1M-24p-16384M-800M:10-X
42641209 +18.9% 50681038 JBOD-10HDD-thresh=800M/xfs-1dd-1M-24p-16384M-800M:10-X
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
This fixes a soft lockup on conditions
a) the flusher is working on a work by __bdi_start_writeback(), while
b) someone else calls writeback_inodes_sb*() or sync_inodes_sb(), which
grab sb->s_umount and enqueue a new work for the flusher to execute
The s_umount grabbed by (b) will fail the grab_super_passive() in (a).
Then if the inode is requeued, wb_writeback() will busy retry on it.
As a result, wb_writeback() loops for ever without releasing
wb->list_lock, which further blocks other tasks.
Fix the busy loop by redirtying the inode. This may undesirably delay
the writeback of the inode, however most likely it will be picked up
soon by the queued work by writeback_inodes_sb*(), sync_inodes_sb() or
even writeback_inodes_wb().
bug url: http://www.spinics.net/lists/linux-fsdevel/msg47292.html
Reported-by: Christoph Hellwig <hch@infradead.org>
Tested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Fix a system hang bug introduced by commit b7a2441f99 ("writeback:
remove writeback_control.more_io") and e8dfc3058 ("writeback: elevate
queue_io() into wb_writeback()") easily reproducible with high memory
pressure and lots of file creation/deletions, for example, a kernel
build in limited memory.
It hangs when some inode is in the I_NEW, I_FREEING or I_WILL_FREE
state, the flusher will get stuck busy retrying that inode, never
releasing wb->list_lock. The lock in turn blocks all kinds of other
tasks when they are trying to grab it.
As put by Jan, it's a safe change regarding data integrity. I_FREEING or
I_WILL_FREE inodes are written back by iput_final() and it is reclaim
code that is responsible for eventually removing them. So writeback code
can safely ignore them. I_NEW inodes should move out of this state when
they are fully set up and in the writeback round following that, we will
consider them for writeback. So the change makes sense.
CC: Jan Kara <jack@suse.cz>
Reported-by: Hugh Dickins <hughd@google.com>
Tested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
The per-sb shrinker has the same requirement as the writeback
threads of ensuring that the superblock is usable and pinned for the
time it takes to run the work. Both need to take a passive reference
to the sb, take a read lock on the s_umount lock and then only
continue if an unmount is not in progress.
pin_sb_for_writeback() does this exactly, so move it to fs/super.c
and rename it to grab_super_passive() and exporting it via
fs/internal.h for all the VFS code to be able to use.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Originally, MAX_WRITEBACK_PAGES was hard-coded to 1024 because of a
concern of not holding I_SYNC for too long. (At least, that was the
comment previously.) This doesn't make sense now because the only
time we wait for I_SYNC is if we are calling sync or fsync, and in
that case we need to write out all of the data anyway. Previously
there may have been other code paths that waited on I_SYNC, but not
any more. -- Theodore Ts'o
So remove the MAX_WRITEBACK_PAGES constraint. The writeback pages
will adapt to as large as the storage device can write within 500ms.
XFS is observed to do IO completions in a batch, and the batch size is
equal to the write chunk size. To avoid dirty pages to suddenly drop
out of balance_dirty_pages()'s dirty control scope and create large
fluctuations, the chunk size is also limited to half the control scope.
The balance_dirty_pages() control scrope is
[(background_thresh + dirty_thresh) / 2, dirty_thresh]
which is by default [15%, 20%] of global dirty pages, whose range size
is dirty_thresh / DIRTY_FULL_SCOPE.
The adpative write chunk size will be rounded to the nearest 4MB
boundary.
http://bugzilla.kernel.org/show_bug.cgi?id=13930
CC: Theodore Ts'o <tytso@mit.edu>
CC: Dave Chinner <david@fromorbit.com>
CC: Chris Mason <chris.mason@oracle.com>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
The start of a heavy weight application (ie. KVM) may instantly knock
down determine_dirtyable_memory() if the swap is not enabled or full.
global_dirty_limits() and bdi_dirty_limit() will in turn get global/bdi
dirty thresholds that are _much_ lower than the global/bdi dirty pages.
balance_dirty_pages() will then heavily throttle all dirtiers including
the light ones, until the dirty pages drop below the new dirty thresholds.
During this _deep_ dirty-exceeded state, the system may appear rather
unresponsive to the users.
About "deep" dirty-exceeded: task_dirty_limit() assigns 1/8 lower dirty
threshold to heavy dirtiers than light ones, and the dirty pages will
be throttled around the heavy dirtiers' dirty threshold and reasonably
below the light dirtiers' dirty threshold. In this state, only the heavy
dirtiers will be throttled and the dirty pages are carefully controlled
to not exceed the light dirtiers' dirty threshold. However if the
threshold itself suddenly drops below the number of dirty pages, the
light dirtiers will get heavily throttled.
So introduce global_dirty_limit for tracking the global dirty threshold
with policies
- follow downwards slowly
- follow up in one shot
global_dirty_limit can effectively mask out the impact of sudden drop of
dirtyable memory. It will be used in the next patch for two new type of
dirty limits. Note that the new dirty limits are not going to avoid
throttling the light dirtiers, but could limit their sleep time to 200ms.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
The estimation value will start from 100MB/s and adapt to the real
bandwidth in seconds.
It tries to update the bandwidth only when disk is fully utilized.
Any inactive period of more than one second will be skipped.
The estimated bandwidth will be reflecting how fast the device can
writeout when _fully utilized_, and won't drop to 0 when it goes idle.
The value will remain constant at disk idle time. At busy write time, if
not considering fluctuations, it will also remain high unless be knocked
down by possible concurrent reads that compete for the disk time and
bandwidth with async writes.
The estimation is not done purely in the flusher because there is no
guarantee for write_cache_pages() to return timely to update bandwidth.
The bdi->avg_write_bandwidth smoothing is very effective for filtering
out sudden spikes, however may be a little biased in long term.
The overheads are low because the bdi bandwidth update only occurs at
200ms intervals.
The 200ms update interval is suitable, because it's not possible to get
the real bandwidth for the instance at all, due to large fluctuations.
The NFS commits can be as large as seconds worth of data. One XFS
completion may be as large as half second worth of data if we are going
to increase the write chunk to half second worth of data. In ext4,
fluctuations with time period of around 5 seconds is observed. And there
is another pattern of irregular periods of up to 20 seconds on SSD tests.
That's why we are not only doing the estimation at 200ms intervals, but
also averaging them over a period of 3 seconds and then go further to do
another level of smoothing in avg_write_bandwidth.
CC: Li Shaohua <shaohua.li@intel.com>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Pass struct wb_writeback_work all the way down to writeback_sb_inodes(),
and initialize the struct writeback_control there.
struct writeback_control is basically designed to control writeback of a
single file, but we keep abuse it for writing multiple files in
writeback_sb_inodes() and its callers.
It immediately clean things up, e.g. suddenly wbc.nr_to_write vs
work->nr_pages starts to make sense, and instead of saving and restoring
pages_skipped in writeback_sb_inodes it can always start with a clean
zero value.
It also makes a neat IO pattern change: large dirty files are now
written in the full 4MB writeback chunk size, rather than whatever
remained quota in wbc->nr_to_write.
Acked-by: Jan Kara <jack@suse.cz>
Proposed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Note that it adds a little overheads to account the moved/enqueued
inodes from b_dirty to b_io. The "moved" accounting may be later used to
limit the number of inodes that can be moved in one shot, in order to
keep spinlock hold time under control.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
It is valuable to know how the dirty inodes are iterated and their IO size.
"writeback_single_inode: bdi 8:0: ino=134246746 state=I_DIRTY_SYNC|I_SYNC age=414 index=0 to_write=1024 wrote=0"
- "state" reflects inode->i_state at the end of writeback_single_inode()
- "index" reflects mapping->writeback_index after the ->writepages() call
- "to_write" is the wbc->nr_to_write at entrance of writeback_single_inode()
- "wrote" is the number of pages actually written
v2: add trace event writeback_single_inode_requeue as proposed by Dave.
CC: Dave Chinner <david@fromorbit.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
When wbc.more_io was first introduced, it indicates whether there are
at least one superblock whose s_more_io contains more IO work. Now with
the per-bdi writeback, it can be replaced with a simple b_more_io test.
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
This removes writeback_control.wb_start and does more straightforward
sync livelock prevention by setting .older_than_this to prevent extra
inodes from being enqueued in the first place.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Code refactor for more logical code layout.
No behavior change.
- remove the mis-named __writeback_inodes_sb()
- wb_writeback()/writeback_inodes_wb() will decide when to queue_io()
before calling __writeback_inodes_wb()
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Split the global inode_wb_list_lock into a per-bdi_writeback list_lock,
as it's currently the most contended lock in the system for metadata
heavy workloads. It won't help for single-filesystem workloads for
which we'll need the I/O-less balance_dirty_pages, but at least we
can dedicate a cpu to spinning on each bdi now for larger systems.
Based on earlier patches from Nick Piggin and Dave Chinner.
It reduces lock contentions to 1/4 in this test case:
10 HDD JBOD, 100 dd on each disk, XFS, 6GB ram
lock_stat version 0.3
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
class name con-bounces contentions waittime-min waittime-max waittime-total acq-bounces acquisitions holdtime-min holdtime-max holdtime-total
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
vanilla 2.6.39-rc3:
inode_wb_list_lock: 42590 44433 0.12 147.74 144127.35 252274 886792 0.08 121.34 917211.23
------------------
inode_wb_list_lock 2 [<ffffffff81165da5>] bdev_inode_switch_bdi+0x29/0x85
inode_wb_list_lock 34 [<ffffffff8115bd0b>] inode_wb_list_del+0x22/0x49
inode_wb_list_lock 12893 [<ffffffff8115bb53>] __mark_inode_dirty+0x170/0x1d0
inode_wb_list_lock 10702 [<ffffffff8115afef>] writeback_single_inode+0x16d/0x20a
------------------
inode_wb_list_lock 2 [<ffffffff81165da5>] bdev_inode_switch_bdi+0x29/0x85
inode_wb_list_lock 19 [<ffffffff8115bd0b>] inode_wb_list_del+0x22/0x49
inode_wb_list_lock 5550 [<ffffffff8115bb53>] __mark_inode_dirty+0x170/0x1d0
inode_wb_list_lock 8511 [<ffffffff8115b4ad>] writeback_sb_inodes+0x10f/0x157
2.6.39-rc3 + patch:
&(&wb->list_lock)->rlock: 11383 11657 0.14 151.69 40429.51 90825 527918 0.11 145.90 556843.37
------------------------
&(&wb->list_lock)->rlock 10 [<ffffffff8115b189>] inode_wb_list_del+0x5f/0x86
&(&wb->list_lock)->rlock 1493 [<ffffffff8115b1ed>] writeback_inodes_wb+0x3d/0x150
&(&wb->list_lock)->rlock 3652 [<ffffffff8115a8e9>] writeback_sb_inodes+0x123/0x16f
&(&wb->list_lock)->rlock 1412 [<ffffffff8115a38e>] writeback_single_inode+0x17f/0x223
------------------------
&(&wb->list_lock)->rlock 3 [<ffffffff8110b5af>] bdi_lock_two+0x46/0x4b
&(&wb->list_lock)->rlock 6 [<ffffffff8115b189>] inode_wb_list_del+0x5f/0x86
&(&wb->list_lock)->rlock 2061 [<ffffffff8115af97>] __mark_inode_dirty+0x173/0x1cf
&(&wb->list_lock)->rlock 2629 [<ffffffff8115a8e9>] writeback_sb_inodes+0x123/0x16f
hughd@google.com: fix recursive lock when bdi_lock_two() is called with new the same as old
akpm@linux-foundation.org: cleanup bdev_inode_switch_bdi() comment
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
There is no point to carry different refill policies between for_kupdate
and other type of works. Use a consistent "refill b_io iff empty" policy
which can guarantee fairness in an easy to understand way.
A b_io refill will setup a _fixed_ work set with all currently eligible
inodes and start a new round of walk through b_io. The "fixed" work set
means no new inodes will be added to the work set during the walk.
Only when a complete walk over b_io is done, new inodes that are
eligible at the time will be enqueued and the walk be started over.
This procedure provides fairness among the inodes because it guarantees
each inode to be synced once and only once at each round. So all inodes
will be free from starvations.
This change relies on wb_writeback() to keep retrying as long as we made
some progress on cleaning some pages and/or inodes. Without that ability,
the old logic on background works relies on aggressively queuing all
eligible inodes into b_io at every time. But that's not a guarantee.
The below test script completes a slightly faster now:
2.6.39-rc3 2.6.39-rc3-dyn-expire+
------------------------------------------------
all elapsed 256.043 252.367
stddev 24.381 12.530
tar elapsed 30.097 28.808
dd elapsed 13.214 11.782
#!/bin/zsh
cp /c/linux-2.6.38.3.tar.bz2 /dev/shm/
umount /dev/sda7
mkfs.xfs -f /dev/sda7
mount /dev/sda7 /fs
echo 3 > /proc/sys/vm/drop_caches
tic=$(cat /proc/uptime|cut -d' ' -f2)
cd /fs
time tar jxf /dev/shm/linux-2.6.38.3.tar.bz2 &
time dd if=/dev/zero of=/fs/zero bs=1M count=1000 &
wait
sync
tac=$(cat /proc/uptime|cut -d' ' -f2)
echo elapsed: $((tac - tic))
It maintains roughly the same small vs. large file writeout shares, and
offers large files better chances to be written in nice 4M chunks.
Analyzes from Dave Chinner in great details:
Let's say we have lots of inodes with 100 dirty pages being created,
and one large writeback going on. We expire 8 new inodes for every
1024 pages we write back.
With the old code, we do:
b_more_io (large inode) -> b_io (1l)
8 newly expired inodes -> b_io (1l, 8s)
writeback large inode 1024 pages -> b_more_io
b_more_io (large inode) -> b_io (8s, 1l)
8 newly expired inodes -> b_io (8s, 1l, 8s)
writeback 8 small inodes 800 pages
1 large inode 224 pages -> b_more_io
b_more_io (large inode) -> b_io (8s, 1l)
8 newly expired inodes -> b_io (8s, 1l, 8s)
.....
Your new code:
b_more_io (large inode) -> b_io (1l)
8 newly expired inodes -> b_io (1l, 8s)
writeback large inode 1024 pages -> b_more_io
(b_io == 8s)
writeback 8 small inodes 800 pages
b_io empty: (1800 pages written)
b_more_io (large inode) -> b_io (1l)
14 newly expired inodes -> b_io (1l, 14s)
writeback large inode 1024 pages -> b_more_io
(b_io == 14s)
writeback 10 small inodes 1000 pages
1 small inode 24 pages -> b_more_io (1l, 1s(24))
writeback 5 small inodes 500 pages
b_io empty: (2548 pages written)
b_more_io (large inode) -> b_io (1l, 1s(24))
20 newly expired inodes -> b_io (1l, 1s(24), 20s)
......
Rough progression of pages written at b_io refill:
Old code:
total large file % of writeback
1024 224 21.9% (fixed)
New code:
total large file % of writeback
1800 1024 ~55%
2550 1024 ~40%
3050 1024 ~33%
3500 1024 ~29%
3950 1024 ~26%
4250 1024 ~24%
4500 1024 ~22.7%
4700 1024 ~21.7%
4800 1024 ~21.3%
4800 1024 ~21.3%
(pretty much steady state from here)
Ok, so the steady state is reached with a similar percentage of
writeback to the large file as the existing code. Ok, that's good,
but providing some evidence that is doesn't change the shared of
writeback to the large should be in the commit message ;)
The other advantage to this is that we always write 1024 page chunks
to the large file, rather than smaller "whatever remains" chunks.
CC: Jan Kara <jack@suse.cz>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Dynamically compute the dirty expire timestamp at queue_io() time.
writeback_control.older_than_this used to be determined at entrance to
the kupdate writeback work. This _static_ timestamp may go stale if the
kupdate work runs on and on. The flusher may then stuck with some old
busy inodes, never considering newly expired inodes thereafter.
This has two possible problems:
- It is unfair for a large dirty inode to delay (for a long time) the
writeback of small dirty inodes.
- As time goes by, the large and busy dirty inode may contain only
_freshly_ dirtied pages. Ignoring newly expired dirty inodes risks
delaying the expired dirty pages to the end of LRU lists, triggering
the evil pageout(). Nevertheless this patch merely addresses part
of the problem.
v2: keep policy changes inside wb_writeback() and keep the
wbc.older_than_this visibility as suggested by Dave.
CC: Dave Chinner <david@fromorbit.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
writeback_inodes_wb()/__writeback_inodes_sb() are not aggressive in that
they only populate possibly a subset of eligible inodes into b_io at
entrance time. When the queued set of inodes are all synced, they just
return, possibly with all queued inode pages written but still
wbc.nr_to_write > 0.
For kupdate and background writeback, there may be more eligible inodes
sitting in b_dirty when the current set of b_io inodes are completed. So
it is necessary to try another round of writeback as long as we made some
progress in this round. When there are no more eligible inodes, no more
inodes will be enqueued in queue_io(), hence nothing could/will be
synced and we may safely bail.
For example, imagine 100 inodes
i0, i1, i2, ..., i90, i91, i99
At queue_io() time, i90-i99 happen to be expired and moved to s_io for
IO. When finished successfully, if their total size is less than
MAX_WRITEBACK_PAGES, nr_to_write will be > 0. Then wb_writeback() will
quit the background work (w/o this patch) while it's still over
background threshold. This will be a fairly normal/frequent case I guess.
Now that we do tagged sync and update inode->dirtied_when after the sync,
this change won't livelock sync(1). I actually tried to write 1 page
per 1ms with this command
write-and-fsync -n10000 -S 1000 -c 4096 /fs/test
and do sync(1) at the same time. The sync completes quickly on ext4,
xfs, btrfs.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
The flusher works on dirty inodes in batches, and may quit prematurely
if the batch of inodes happen to be metadata-only dirtied: in this case
wbc->nr_to_write won't be decreased at all, which stands for "no pages
written" but also mis-interpreted as "no progress".
So introduce writeback_control.inodes_written to count the inodes get
cleaned from VFS POV. A non-zero value means there are some progress on
writeback, in which case more writeback can be tried.
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Explicitly update .dirtied_when on synced inodes, so that they are no
longer considered for writeback in the next round.
It can prevent both of the following livelock schemes:
- while true; do echo data >> f; done
- while true; do touch f; done (in theory)
The exact livelock condition is, during sync(1):
(1) no new inodes are dirtied
(2) an inode being actively dirtied
On (2), the inode will be tagged and synced with .nr_to_write=LONG_MAX.
When finished, it will be redirty_tail()ed because it's still dirty
and (.nr_to_write > 0). redirty_tail() won't update its ->dirtied_when
on condition (1). The sync work will then revisit it on the next
queue_io() and find it eligible again because its old ->dirtied_when
predates the sync work start time.
We'll do more aggressive "keep writeback as long as we wrote something"
logic in wb_writeback(). The "use LONG_MAX .nr_to_write" trick in commit
b9543dac5b ("writeback: avoid livelocking WB_SYNC_ALL writeback") will
no longer be enough to stop sync livelock.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
sync(2) is performed in two stages: the WB_SYNC_NONE sync and the
WB_SYNC_ALL sync. Identify the first stage with .tagged_writepages and
do livelock prevention for it, too.
Jan's commit f446daaea9 ("mm: implement writeback livelock avoidance
using page tagging") is a partial fix in that it only fixed the
WB_SYNC_ALL phase livelock.
Although ext4 is tested to no longer livelock with commit f446daaea9,
it may due to some "redirty_tail() after pages_skipped" effect which
is by no means a guarantee for _all_ the file systems.
Note that writeback_inodes_sb() is called by not only sync(), they are
treated the same because the other callers also need livelock prevention.
Impact: It changes the order in which pages/inodes are synced to disk.
Now in the WB_SYNC_NONE stage, it won't proceed to write the next inode
until finished with the current inode.
Acked-by: Jan Kara <jack@suse.cz>
CC: Dave Chinner <david@fromorbit.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Tell the filesystem if we just updated timestamp (I_DIRTY_SYNC) or
anything else, so that the filesystem can track internally if it
needs to push out a transaction for fdatasync or not.
This is just the prototype change with no user for it yet. I plan
to push large XFS changes for the next merge window, and getting
this trivial infrastructure in this window would help a lot to avoid
tree interdependencies.
Also remove incorrect comments that ->dirty_inode can't block. That
has been changed a long time ago, and many implementations rely on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
First thing we do in writeback_single_inode() is take the i_lock and
the last thing we do is drop it. A caller already holds the i_lock,
so pull the i_lock out of writeback_single_inode() to reduce the
round trips on this lock during inode writeback.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Protect the inode writeback list with a new global lock
inode_wb_list_lock and use it to protect the list manipulations and
traversals. This lock replaces the inode_lock as the inodes on the
list can be validity checked while holding the inode->i_lock and
hence the inode_lock is no longer needed to protect the list.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Protect the per-sb inode list with a new global lock
inode_sb_list_lock and use it to protect the list manipulations and
traversals. This lock replaces the inode_lock as the inodes on the
list can be validity checked while holding the inode->i_lock and
hence the inode_lock is no longer needed to protect the list.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Protect inode state transitions and validity checks with the
inode->i_lock. This enables us to make inode state transitions
independently of the inode_lock and is the first step to peeling
away the inode_lock from the code.
This requires that __iget() is done atomically with i_state checks
during list traversals so that we don't race with another thread
marking the inode I_FREEING between the state check and grabbing the
reference.
Also remove the unlock_new_inode() memory barrier optimisation
required to avoid taking the inode_lock when clearing I_NEW.
Simplify the code by simply taking the inode->i_lock around the
state change and wakeup. Because the wakeup is no longer tricky,
remove the wake_up_inode() function and open code the wakeup where
necessary.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The sync_inodes_sb() function does not have a return value. Remove the
outdated documentation comment.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use correct function name, remove incorrect apostrophe
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When wb_writeback() is called in WB_SYNC_ALL mode, work->nr_to_write is
usually set to LONG_MAX. The logic in wb_writeback() then calls
__writeback_inodes_sb() with nr_to_write == MAX_WRITEBACK_PAGES and we
easily end up with non-positive nr_to_write after the function returns, if
the inode has more than MAX_WRITEBACK_PAGES dirty pages at the moment.
When nr_to_write is <= 0 wb_writeback() decides we need another round of
writeback but this is wrong in some cases! For example when a single
large file is continuously dirtied, we would never finish syncing it
because each pass would be able to write MAX_WRITEBACK_PAGES and inode
dirty timestamp never gets updated (as inode is never completely clean).
Thus __writeback_inodes_sb() would write the redirtied inode again and
again.
Fix the issue by setting nr_to_write to LONG_MAX in WB_SYNC_ALL mode. We
do not need nr_to_write in WB_SYNC_ALL mode anyway since
write_cache_pages() does livelock avoidance using page tagging in
WB_SYNC_ALL mode.
This makes wb_writeback() call __writeback_inodes_sb() only once on
WB_SYNC_ALL. The latter function won't livelock because it works on
- a finite set of files by doing queue_io() once at the beginning
- a finite set of pages by PAGECACHE_TAG_TOWRITE page tagging
After this patch, program from http://lkml.org/lkml/2010/10/24/154 is no
longer able to stall sync forever.
[fengguang.wu@intel.com: fix locking comment]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Engelhardt <jengelh@medozas.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Background writeback is easily livelockable in a loop in wb_writeback() by
a process continuously re-dirtying pages (or continuously appending to a
file). This is in fact intended as the target of background writeback is
to write dirty pages it can find as long as we are over
dirty_background_threshold.
But the above behavior gets inconvenient at times because no other work
queued in the flusher thread's queue gets processed. In particular, since
e.g. sync(1) relies on flusher thread to do all the IO for it, sync(1)
can hang forever waiting for flusher thread to do the work.
Generally, when a flusher thread has some work queued, someone submitted
the work to achieve a goal more specific than what background writeback
does. Moreover by working on the specific work, we also reduce amount of
dirty pages which is exactly the target of background writeout. So it
makes sense to give specific work a priority over a generic page cleaning.
Thus we interrupt background writeback if there is some other work to do.
We return to the background writeback after completing all the queued
work.
This may delay the writeback of expired inodes for a while, however the
expired inodes will eventually be flushed to disk as long as the other
works won't livelock.
[fengguang.wu@intel.com: update comment]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Engelhardt <jengelh@medozas.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This tracks when balance_dirty_pages() tries to wakeup the flusher thread
for background writeback (if it was not started already).
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Engelhardt <jengelh@medozas.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Check whether background writeback is needed after finishing each work.
When bdi flusher thread finishes doing some work check whether any kind of
background writeback needs to be done (either because
dirty_background_ratio is exceeded or because we need to start flushing
old inodes). If so, just do background write back.
This way, bdi_start_background_writeback() just needs to wake up the
flusher thread. It will do background writeback as soon as there is no
other work.
This is a preparatory patch for the next patch which stops background
writeback as soon as there is other work to do.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Engelhardt <jengelh@medozas.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (39 commits)
Btrfs: deal with errors from updating the tree log
Btrfs: allow subvol deletion by unprivileged user with -o user_subvol_rm_allowed
Btrfs: make SNAP_DESTROY async
Btrfs: add SNAP_CREATE_ASYNC ioctl
Btrfs: add START_SYNC, WAIT_SYNC ioctls
Btrfs: async transaction commit
Btrfs: fix deadlock in btrfs_commit_transaction
Btrfs: fix lockdep warning on clone ioctl
Btrfs: fix clone ioctl where range is adjacent to extent
Btrfs: fix delalloc checks in clone ioctl
Btrfs: drop unused variable in block_alloc_rsv
Btrfs: cleanup warnings from gcc 4.6 (nonbugs)
Btrfs: Fix variables set but not read (bugs found by gcc 4.6)
Btrfs: Use ERR_CAST helpers
Btrfs: use memdup_user helpers
Btrfs: fix raid code for removing missing drives
Btrfs: Switch the extent buffer rbtree into a radix tree
Btrfs: restructure try_release_extent_buffer()
Btrfs: use the flusher threads for delalloc throttling
Btrfs: tune the chunk allocation to 5% of the FS as metadata
...
Fix up trivial conflicts in fs/btrfs/super.c and fs/fs-writeback.c, and
remove use of INIT_RCU_HEAD in fs/btrfs/extent_io.c (that init macro was
useless and removed in commit 5e8067adfdba: "rcu head remove init")
The btrfs merge looks like hell, because it changes fs-writeback.c, and
the crazy code has this repeated "estimate number of dirty pages"
counting that involves three different helper functions. And it's done
in two different places.
Just unify that whole calculation as a "get_nr_dirty_pages()" helper
function, and the merge result will look half-way decent.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When btrfs is running low on metadata space, it needs to force delayed
allocation pages to disk. It currently does this with a suboptimal walk
of a private list of inodes with delayed allocation, and it would be
much better if we used the generic flusher threads.
writeback_inodes_sb_if_idle would be ideal, but it waits for the flusher
thread to start IO on all the dirty pages in the FS before it returns.
This adds variants of writeback_inodes_sb* that allow the caller to
control how many pages get sent down.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
split invalidate_inodes()
fs: skip I_FREEING inodes in writeback_sb_inodes
fs: fold invalidate_list into invalidate_inodes
fs: do not drop inode_lock in dispose_list
fs: inode split IO and LRU lists
fs: switch bdev inode bdi's correctly
fs: fix buffer invalidation in invalidate_list
fsnotify: use dget_parent
smbfs: use dget_parent
exportfs: use dget_parent
fs: use RCU read side protection in d_validate
fs: clean up dentry lru modification
fs: split __shrink_dcache_sb
fs: improve DCACHE_REFERENCED usage
fs: use percpu counter for nr_dentry and nr_dentry_unused
fs: simplify __d_free
fs: take dcache_lock inside __d_path
fs: do not assign default i_ino in new_inode
fs: introduce a per-cpu last_ino allocator
new helper: ihold()
...
PF_FLUSHER is only ever set, not tested, remove it.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I had to go back to a 2.6.20 tree to work out why we're adding a
number-of-inodes into a number-of-pages count. Restore the lost comment.
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The dirty_ratio was silently limited in global_dirty_limits() to >= 5%.
This is not a user expected behavior. And it's inconsistent with
calc_period_shift(), which uses the plain vm_dirty_ratio value.
Let's remove the internal bound.
At the same time, fix balance_dirty_pages() to work with the
dirty_thresh=0 case. This allows applications to proceed when
dirty+writeback pages are all cleaned.
And ">" fits with the name "exceeded" better than ">=" does. Neil thinks
it is an aesthetic improvement as well as a functional one :)
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Proposed-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michael Rubin <mrubin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Skip I_FREEING inodes just like I_WILL_FREE and I_NEW when walking the
writeback lists. Currenly this can't happen, but once we move from
inode_lock to more fine grained locking we can have an inode that's
still on the writeback lists but has I_FREEING set, and we absolutely
need to skip it here, just like we do for all other inode list walks.
Based on a patch from Dave Chinner.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The use of the same inode list structure (inode->i_list) for two
different list constructs with different lifecycles and purposes
makes it impossible to separate the locking of the different
operations. Therefore, to enable the separation of the locking of
the writeback and reclaim lists, split the inode->i_list into two
separate lists dedicated to their specific tracking functions.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the inode LRU to use lazy updates to reduce lock and
cacheline traffic. We avoid moving inodes around in the LRU list
during iget/iput operations so these frequent operations don't need
to access the LRUs. Instead, we defer the refcount checks to
reclaim-time and use a per-inode state flag, I_REFERENCED, to tell
reclaim that iget has touched the inode in the past. This means that
only reclaim should be touching the LRU with any frequency, hence
significantly reducing lock acquisitions and the amount contention
on LRU updates.
This also removes the inode_in_use list, which means we now only
have one list for tracking the inode LRU status. This makes it much
simpler to split out the LRU list operations under it's own lock.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The number of inodes allocated does not need to be tied to the
addition or removal of an inode to/from a list. If we are not tied
to a list lock, we could update the counters when inodes are
initialised or destroyed, but to do that we need to convert the
counters to be per-cpu (i.e. independent of a lock). This means that
we have the freedom to change the list/locking implementation
without needing to care about the counters.
Based on a patch originally from Eric Dumazet.
[AV: cleaned up a bit, fixed build breakage on weird configs
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a new helper to write out the inode using the writeback code,
that is including the correct dirty bit and list manipulation. A few
of filesystems already opencode this, and a lot of others should be
using it instead of using write_inode_now which also writes out the
data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We currently use struct backing_dev_info for various different purposes.
Originally it was introduced to describe a backing device which includes
an unplug and congestion function and various bits of readahead information
and VM-relevant flags. We're also using for tracking dirty inodes for
writeback.
To make writeback properly find all inodes we need to only access the
per-filesystem backing_device pointed to by the superblock in ->s_bdi
inside the writeback code, and not the instances pointeded to by
inode->i_mapping->backing_dev which can be overriden by special devices
or might not be set at all by some filesystems.
Long term we should split out the writeback-relevant bits of struct
backing_device_info (which includes more than the current bdi_writeback)
and only point to it from the superblock while leaving the traditional
backing device as a separate structure that can be overriden by devices.
The one exception for now is the block device filesystem which really
wants different writeback contexts for it's different (internal) inodes
to handle the writeout more efficiently. For now we do this with
a hack in fs-writeback.c because we're so late in the cycle, but in
the future I plan to replace this with a superblock method that allows
for multiple writeback contexts per filesystem.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Inodes of devices such as /dev/zero can get dirty for example via
utime(2) syscall or due to atime update. Backing device of such inodes
(zero_bdi, etc.) is however unable to handle dirty inodes and thus
__mark_inode_dirty complains. In fact, inode should be rather dirtied
against backing device of the filesystem holding it. This is generally a
good rule except for filesystems such as 'bdev' or 'mtd_inodefs'. Inodes
in these pseudofilesystems are referenced from ordinary filesystem
inodes and carry mapping with real data of the device. Thus for these
inodes we have to use inode->i_mapping->backing_dev_info as we did so
far. We distinguish these filesystems by checking whether sb->s_bdi
points to a non-trivial backing device or not.
Example: Assume we have an ext3 filesystem on /dev/sda1 mounted on /.
There's a device inode A described by a path "/dev/sdb" on this
filesystem. This inode will be dirtied against backing device "8:0"
after this patch. bdev filesystem contains block device inode B coupled
with our inode A. When someone modifies a page of /dev/sdb, it's B that
gets dirtied and the dirtying happens against the backing device "8:16".
Thus both inodes get filed to a correct bdi list.
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Setting the task state here may cause us to miss the wake up from
kthread_stop(), so we need to recheck kthread_should_stop() or risk
sleeping forever in the following schedule().
Symptom was an indefinite hang on an NFSv4 mount. (NFSv4 may create
multiple mounts in a temporary namespace while traversing the mount
path, and since the temporary namespace is immediately destroyed, it may
end up destroying a mount very soon after it was created, possibly
making this race more likely.)
INFO: task mount.nfs4:4314 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
mount.nfs4 D 0000000000000000 2880 4314 4313 0x00000000
ffff88001ed6da28 0000000000000046 ffff88001ed6dfd8 ffff88001ed6dfd8
ffff88001ed6c000 ffff88001ed6c000 ffff88001ed6c000 ffff88001e5003a0
ffff88001ed6dfd8 ffff88001e5003a8 ffff88001ed6c000 ffff88001ed6dfd8
Call Trace:
[<ffffffff8196090d>] schedule_timeout+0x1cd/0x2e0
[<ffffffff8106a31c>] ? mark_held_locks+0x6c/0xa0
[<ffffffff819639a0>] ? _raw_spin_unlock_irq+0x30/0x60
[<ffffffff8106a5fd>] ? trace_hardirqs_on_caller+0x14d/0x190
[<ffffffff819671fe>] ? sub_preempt_count+0xe/0xd0
[<ffffffff8195fc80>] wait_for_common+0x120/0x190
[<ffffffff81033c70>] ? default_wake_function+0x0/0x20
[<ffffffff8195fdcd>] wait_for_completion+0x1d/0x20
[<ffffffff810595fa>] kthread_stop+0x4a/0x150
[<ffffffff81061a60>] ? thaw_process+0x70/0x80
[<ffffffff810cc68a>] bdi_unregister+0x10a/0x1a0
[<ffffffff81229dc9>] nfs_put_super+0x19/0x20
[<ffffffff810ee8c4>] generic_shutdown_super+0x54/0xe0
[<ffffffff810ee9b6>] kill_anon_super+0x16/0x60
[<ffffffff8122d3b9>] nfs4_kill_super+0x39/0x90
[<ffffffff810eda45>] deactivate_locked_super+0x45/0x60
[<ffffffff810edfb9>] deactivate_super+0x49/0x70
[<ffffffff81108294>] mntput_no_expire+0x84/0xe0
[<ffffffff811084ef>] release_mounts+0x9f/0xc0
[<ffffffff81108575>] put_mnt_ns+0x65/0x80
[<ffffffff8122cc56>] nfs_follow_remote_path+0x1e6/0x420
[<ffffffff8122cfbf>] nfs4_try_mount+0x6f/0xd0
[<ffffffff8122d0c2>] nfs4_get_sb+0xa2/0x360
[<ffffffff810edcb8>] vfs_kern_mount+0x88/0x1f0
[<ffffffff810ede92>] do_kern_mount+0x52/0x130
[<ffffffff81963d9a>] ? _lock_kernel+0x6a/0x170
[<ffffffff81108e9e>] do_mount+0x26e/0x7f0
[<ffffffff81106b3a>] ? copy_mount_options+0xea/0x190
[<ffffffff811094b8>] sys_mount+0x98/0xf0
[<ffffffff810024d8>] system_call_fastpath+0x16/0x1b
1 lock held by mount.nfs4/4314:
#0: (&type->s_umount_key#24){+.+...}, at: [<ffffffff810edfb1>] deactivate_super+0x41/0x70
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Commit 83ba7b071f ("writeback: simplify the write back thread queue")
broke writeback_in_progress() as in that commit we started to remove work
items from the list at the moment we start working on them and not at the
moment they are finished. Thus if the flusher thread was doing some work
but there was no other work queued, writeback_in_progress() returned
false. This could in particular cause unnecessary queueing of background
writeback from balance_dirty_pages() or writeout work from
writeback_sb_if_idle().
This patch fixes the problem by introducing a bit in the bdi state which
indicates that the flusher thread is processing some work and uses this
bit for writeback_in_progress() test.
NOTE: Both callsites of writeback_in_progress() (namely,
writeback_inodes_sb_if_idle() and balance_dirty_pages()) would actually
need a different information than what writeback_in_progress() provides.
They would need to know whether *the kind of writeback they are going to
submit* is already queued. But this information isn't that simple to
provide so let's fix writeback_in_progress() for the time being.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Unify the logic for kupdate and non-kupdate cases. There won't be
starvation because the inodes requeued into b_more_io will later be
spliced _after_ the remaining inodes in b_io, hence won't stand in the way
of other inodes in the next run.
It avoids unnecessary redirty_tail() calls, hence the update of
i_dirtied_when. The timestamp update is undesirable because it could
later delay the inode's periodic writeback, or may exclude the inode from
the data integrity sync operation (which checks timestamp to avoid extra
work and livelock).
===
How the redirty_tail() comes about:
It was a long story.. This redirty_tail() was introduced with
wbc.more_io. The initial patch for more_io actually does not have the
redirty_tail(), and when it's merged, several 100% iowait bug reports
arised:
reiserfs:
http://lkml.org/lkml/2007/10/23/93
jfs:
commit 29a424f283
JFS: clear PAGECACHE_TAG_DIRTY for no-write pages
ext2:
http://www.spinics.net/linux/lists/linux-ext4/msg04762.html
They are all old bugs hidden in various filesystems that become "visible"
with the more_io patch. At the time, the ext2 bug is thought to be
"trivial", so not fixed. Instead the following updated more_io patch with
redirty_tail() is merged:
http://www.spinics.net/linux/lists/linux-ext4/msg04507.html
This will in general prevent 100% on ext2 and possibly other unknown FS bugs.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was not a bug, since b_io is empty for kupdate writeback. The next
patch will do requeue_io() for non-kupdate writeback, so let's fix it.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Avoid delaying writeback for an expire inode with lots of dirty pages, but
no active dirtier at the moment. Previously we only do that for the
kupdate case.
Any filesystem that does delayed allocation or unwritten extent conversion
after IO completion will cause this - for example, XFS.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Split get_dirty_limits() into global_dirty_limits()+bdi_dirty_limit(), so
that the latter can be avoided when under global dirty background
threshold (which is the normal state for most systems).
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
xen-blkfront: fix missing out label
blkdev: fix blkdev_issue_zeroout return value
block: update request stacking methods to support discards
block: fix missing export of blk_types.h
writeback: fix bad _bh spinlock nesting
drbd: revert "delay probes", feature is being re-implemented differently
drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
drbd: Disable delay probes for the upcomming release
writeback: cleanup bdi_register
writeback: add new tracepoints
writeback: remove unnecessary init_timer call
writeback: optimize periodic bdi thread wakeups
writeback: prevent unnecessary bdi threads wakeups
writeback: move bdi threads exiting logic to the forker thread
writeback: restructure bdi forker loop a little
writeback: move last_active to bdi
writeback: do not remove bdi from bdi_list
writeback: simplify bdi code a little
writeback: do not lose wake-ups in bdi threads
...
Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
no need for list_for_each_entry_safe()/resetting with superblock list
Fix sget() race with failing mount
vfs: don't hold s_umount over close_bdev_exclusive() call
sysv: do not mark superblock dirty on remount
sysv: do not mark superblock dirty on mount
btrfs: remove junk sb_dirt change
BFS: clean up the superblock usage
AFFS: wait for sb synchronization when needed
AFFS: clean up dirty flag usage
cifs: truncate fallout
mbcache: fix shrinker function return value
mbcache: Remove unused features
add f_flags to struct statfs(64)
pass a struct path to vfs_statfs
update VFS documentation for method changes.
All filesystems that need invalidate_inode_buffers() are doing that explicitly
convert remaining ->clear_inode() to ->evict_inode()
Make ->drop_inode() just return whether inode needs to be dropped
fs/inode.c:clear_inode() is gone
fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
...
Fix up trivial conflicts in fs/nilfs2/super.c
WB_SYNC_NONE writeback is done in rounds of 1024 pages so that we don't
write out some huge inode for too long while starving writeout of other
inodes. To avoid livelocks, we record time we started writeback in
wbc->wb_start and do not write out inodes which were dirtied after this
time. But currently, writeback_inodes_wb() resets wb_start each time it
is called thus effectively invalidating this logic and making any
WB_SYNC_NONE writeback prone to livelocks.
This patch makes sure wb_start is set only once when we start writeback.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
add I_CLEAR instead of replacing I_FREEING with it. I_CLEAR is
equivalent to I_FREEING for almost all code looking at either;
it's there to keep track of having called clear_inode() exactly
once per inode lifetime, at some point after having set I_FREEING.
I_CLEAR and I_FREEING never get set at the same time with the
current code, so we can switch to setting i_flags to I_FREEING | I_CLEAR
instead of I_CLEAR without loss of information. As the result of
such change, checks become simpler and the amount of code that needs
to know about I_CLEAR shrinks a lot.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Whe the first inode for a bdi is marked dirty, we wake up the bdi thread which
should take care of the periodic background write-out. However, the write-out
will actually start only 'dirty_writeback_interval' centisecs later, so we can
delay the wake-up.
This change was requested by Nick Piggin who pointed out that if we delay the
wake-up, we weed out 2 unnecessary contex switches, which matters because
'__mark_inode_dirty()' is a hot-path function.
This patch introduces a new function - 'bdi_wakeup_thread_delayed()', which
sets up a timer to wake-up the bdi thread and returns. So the wake-up is
delayed.
We also delete the timer in bdi threads just before writing-back. And
synchronously delete it when unregistering bdi. At the unregister point the bdi
does not have any users, so no one can arm it again.
Since now we take 'bdi->wb_lock' in the timer, which can execute in softirq
context, we have to use 'spin_lock_bh()' for 'bdi->wb_lock'. This patch makes
this change as well.
This patch also moves the 'bdi_wb_init()' function down in the file to avoid
forward-declaration of 'bdi_wakeup_thread_delayed()'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Finally, we can get rid of unnecessary wake-ups in bdi threads, which are very
bad for battery-driven devices.
There are two types of activities bdi threads do:
1. process bdi works from the 'bdi->work_list'
2. periodic write-back
So there are 2 sources of wake-up events for bdi threads:
1. 'bdi_queue_work()' - submits bdi works
2. '__mark_inode_dirty()' - adds dirty I/O to bdi's
The former already has bdi wake-up code. The latter does not, and this patch
adds it.
'__mark_inode_dirty()' is hot-path function, but this patch adds another
'spin_lock(&bdi->wb_lock)' there. However, it is taken only in rare cases when
the bdi has no dirty inodes. So adding this spinlock should be fine and should
not affect performance.
This patch makes sure bdi threads and the forker thread do not wake-up if there
is nothing to do. The forker thread will nevertheless wake up at least every
5 min. to check whether it has to kill a bdi thread. This can also be optimized,
but is not worth it.
This patch also tidies up the warning about unregistered bid, and turns it from
an ugly crocodile to a simple 'WARN()' statement.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently, bdi threads can decide to exit if there were no useful activities
for 5 minutes. However, this causes nasty races: we can easily oops in the
'bdi_queue_work()' if the bdi thread decides to exit while we are waking it up.
And even if we do not oops, but the bdi tread exits immediately after we wake
it up, we'd lose the wake-up event and have an unnecessary delay (up to 5 secs)
in the bdi work processing.
This patch makes the forker thread to be the central place which not only
creates bdi threads, but also kills them if they were inactive long enough.
This better design-wise.
Another reason why this change was done is to prepare for the further changes
which will prevent the bdi threads from waking up every 5 sec and wasting
power. Indeed, when the task does not wake up periodically anymore, it won't be
able to exit either.
This patch also moves the the 'wake_up_bit()' call from the bdi thread to the
forker thread as well. So now the forker thread sets the BDI_pending bit, then
forks the task or kills it, then clears the bit and wakes up the waiting
process.
The only process which may wain on the bit is 'bdi_wb_shutdown()'. This
function was changed as well - now it first removes the bdi from the
'bdi_list', then waits on the 'BDI_pending' bit. Once it wakes up, it is
guaranteed that the forker thread won't race with it, because the bdi is not
visible. Note, the forker thread sets the 'BDI_pending' bit under the
'bdi->wb_lock' which is essential for proper serialization.
And additionally, when we change 'bdi->wb.task', we now take the
'bdi->work_lock', to make sure that we do not lose wake-ups which we otherwise
would when raced with, say, 'bdi_queue_work()'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently bdi threads use local variable 'last_active' which stores last time
when the bdi thread did some useful work. Move this local variable to 'struct
bdi_writeback'. This is just a preparation for the further patches which will
make the forker thread decide when bdi threads should be killed.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The forker thread removes bdis from 'bdi_list' before forking the bdi thread.
But this is wrong for at least 2 reasons.
Reason #1: if we temporary remove a bdi from the list, we may miss works which
would otherwise be given to us.
Reason #2: this is racy; indeed, 'bdi_wb_shutdown()' expects that bdis are
always in the 'bdi_list' (see 'bdi_remove_from_list()'), and when
it races with the forker thread, it can shut down the bdi thread
at the same time as the forker creates it.
This patch makes sure the forker thread never removes bdis from 'bdi_list'
(which was suggested by Christoph Hellwig).
In order to make sure that we do not race with 'bdi_wb_shutdown()', we have to
hold the 'bdi_lock' while walking the 'bdi_list' and setting the 'BDI_pending'
flag.
NOTE! The error path is interesting. Currently, when we fail to create a bdi
thread, we move the bdi to the tail of 'bdi_list'. But if we never remove the
bdi from the list, we cannot move it to the tail either, because then we can
mess up the RCU readers which walk the list. And also, we'll have the race
described above in "Reason #2".
But I not think that adding to the tail is any important so I just do not do
that.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently, bdi threads ('bdi_writeback_thread()') can lose wake-ups. For
example, if 'bdi_queue_work()' is executed after the bdi thread have had
finished 'wb_do_writeback()' but before it called
'schedule_timeout_interruptible()'.
To fix this issue, we have to check whether we have works to process after we
have changed the task state to 'TASK_INTERRUPTIBLE'.
This patch also clean-ups handling of the cases when 'dirty_writeback_interval'
is zero or non-zero.
Additionally, this patch also removes unneeded 'list_empty_careful()' call.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The write-back code mixes words "thread" and "task" for the same things. This
is not a big deal, but still an inconsistency.
hch: a convention I tend to use and I've seen in various places
is to always use _task for the storage of the task_struct pointer,
and thread everywhere else. This especially helps with having
foo_thread for the actual thread and foo_task for a global
variable keeping the task_struct pointer
This patch renames:
* 'bdi_add_default_flusher_task()' -> 'bdi_add_default_flusher_thread()'
* 'bdi_forker_task()' -> 'bdi_forker_thread()'
because bdi threads are 'bdi_writeback_thread()', so these names are more
consistent.
This patch also amends commentaries and makes them refer the forker and bdi
threads as "thread", not "task".
Also, while on it, make 'bdi_add_default_flusher_thread()' declaration use
'static void' instead of 'void static' and make checkpatch.pl happy.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
83ba7b07 cleans up the writeback.
So we don't use wb any more in get_next_work_item.
Let's remove unnecessary argument.
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Tracing high level background writeback events is good, but it doesn't
give the entire picture. Add visibility into write throttling to catch IO
dispatched by foreground throttling of processing dirtying lots of pages.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Trace queue/sched/exec parts of the writeback loop. This provides
insight into when and why flusher threads are scheduled to run. e.g
a sync invocation leaves traces like:
sync-[...]: writeback_queue: bdi 8:0: sb_dev 8:1 nr_pages=7712 sync_mode=0 kupdate=0 range_cyclic=0 background=0
flush-8:0-[...]: writeback_exec: bdi 8:0: sb_dev 8:1 nr_pages=7712 sync_mode=0 kupdate=0 range_cyclic=0 background=0
This also lays the foundation for adding more writeback tracing to
provide deeper insight into the whole writeback path.
The original tracing code is from Jens Axboe, though this version is
a rewrite as a result of the code being traced changing
significantly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Move all code for the writeback thread into fs/fs-writeback.c instead of
splitting it over two functions in two files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The wb_list member of struct backing_device_info always has exactly one
element. Just use the direct bdi->wb pointer instead and simplify some
code.
Also remove bdi_task_init which is now trivial to prepare for the next
patch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
First remove items from work_list as soon as we start working on them. This
means we don't have to track any pending or visited state and can get
rid of all the RCU magic freeing the work items - we can simply free
them once the operation has finished. Second use a real completion for
tracking synchronous requests - if the caller sets the completion pointer
we complete it, otherwise use it as a boolean indicator that we can free
the work item directly. Third unify struct wb_writeback_args and struct
bdi_work into a single data structure, wb_writeback_work. Previous we
set all parameters into a struct wb_writeback_args, copied it into
struct bdi_work, copied it again on the stack to use it there. Instead
of just allocate one structure dynamically or on the stack and use it
all the way through the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The case where we have a superblock doesn't require a loop here as we scan
over all inodes in writeback_sb_inodes. Split it out into a separate helper
to make the code simpler. This also allows to get rid of the sb member in
struct writeback_control, which was rather out of place there.
Also update the comments in writeback_sb_inodes that explain the handling
of inodes from wrong superblocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This was just an odd wrapper around writeback_inodes_wb. Removing this
also allows to get rid of the bdi member of struct writeback_control
which was rather out of place there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Fix kernel-doc to match the function's changed args.
Warning(fs/fs-writeback.c:190): No description found for parameter 'args'
Warning(fs/fs-writeback.c:190): Excess function parameter 'sb' description in 'bdi_queue_work_onstack'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
We need to check for s_instances to make sure we don't bother working
against a filesystem that is beeing unmounted, and we need to call
put_super to make sure a superblock is freed when we race against
umount. Also no need to keep sb_lock after we got a reference on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
In "writeback: fix writeback_inodes_wb from writeback_inodes_sb" I
accidentally removed the requeue_io if we need to skip a superblock
because we can't pin it. Add it back, otherwise we're getting spurious
lockups after multiple xfstests runs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
bdi_start_writeback now never gets a superblock passed, so we can just remove
that case. And to further untangle the code and flatten the call stack
split it into two trivial helpers for it's two callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
bdi_writeback_all only has one caller, so fold it to simplify the code and
flatten the call stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
When we call writeback_inodes_wb from writeback_inodes_sb we always have
s_umount held, which currently makes the whole operation a no-op.
But if we are called to write out inodes for a specific superblock we always
have s_umount held, so replace the incorrect logic checking for WB_SYNC_ALL
which only worked by coincidence with the proper check for an explicit
superblock argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Make sure that not only sync_filesystem but all callers of writeback_inodes_sb
have the superblock protected against remount. As-is this disables all
functionality for these callers, but the next patch relies on this locking to
fix writeback_inodes_sb for sync_filesystem.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
If we want to rely on s_umount in the caller we need to wait for completion
of the I/O submission before returning to the caller. Refactor
bdi_sync_writeback into a bdi_queue_work_onstack helper and use it for this
case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The code dealing with bdi_work->state and completion of a bdi_work is a
major mess currently. This patch makes sure we directly use one set of
flags to deal with it, and use it consistently, which means:
- always notify about completion from the rcu callback. We only ever
wait for it from on-stack callers, so this simplification does not
even cause a theoretical slowdown currently. It also makes sure we
don't miss out on the notification if we ever add other callers to
wait for it.
- make earlier completion notification depending on the on-stack
allocation, not the sync mode. If we introduce new callers that
want to do WB_SYNC_NONE writeback from on-stack callers this will
be nessecary.
Also rename bdi_wait_on_work_clear to bdi_wait_on_work_done and inline
a few small functions into their only caller to make the code
understandable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This reverts commit e913fc825d.
We are investigating a hang associated with the WB_SYNC_NONE changes,
so revert them for now.
Conflicts:
fs/fs-writeback.c
mm/page-writeback.c
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This reverts commit 7c8a3554c6.
We are investigating a hang associated with the WB_SYNC_NONE changes,
so revert them for now.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Linus Torvalds