init_numa_memory() is annotated __init and not used by any module,
thus don't export it.
Remove not needed EXPORT_SYMBOL for init_numa_memory() to fix the
following section mismatch warning:
MODPOST vmlinux.symvers
WARNING: modpost: vmlinux.o(___ksymtab+init_numa_memory+0x0): Section mismatch in reference
from the variable __ksymtab_init_numa_memory to the function .init.text:init_numa_memory()
The symbol init_numa_memory is exported and annotated __init
Fix this by removing the __init annotation of init_numa_memory or drop the export.
This is build on Linux 5.19-rc4.
Fixes: d4b6f1562a ("LoongArch: Add Non-Uniform Memory Access (NUMA) support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Building loongarch:tinyconfig fails with the following error.
./arch/loongarch/include/asm/page.h: In function 'pfn_valid':
./arch/loongarch/include/asm/page.h:42:32: error: 'PHYS_OFFSET' undeclared
Add the missing include file and fix succeeding vdso errors.
Fixes: 09cfefb7fa ("LoongArch: Add memory management")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The `vcsr` only exists in the old hardware design, it isn't used in any
shipped hardware from Loongson-3A5000 on. Both scalar FP and LSX/LASX
instructions use the `fcsr` as their control and status registers now.
For example, the RM control bit in fcsr0 is shared by FP, LSX and LASX
instructions.
Particularly, fcsr16 to fcsr31 are reserved for LSX/LASX now, access to
these registers has no visible effect if LSX/LASX is enabled, and will
cause SXD/ASXD exceptions if LSX/LASX is not enabled.
So, mentions of vcsr are obsolete in the first place (it was just used
for debugging), let's remove them.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Qi Hu <huqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Commit fa96b57c14 ("LoongArch: Add build infrastructure") adds the new
file arch/loongarch/Kconfig.
As the work on LoongArch was probably quite some time under development,
various config symbols have changed and disappeared from the time of
initial writing of the Kconfig file and its inclusion in the repository.
The following four commits:
commit c126a53c27 ("arch: remove GENERIC_FIND_FIRST_BIT entirely")
commit 140c8180eb ("arch: remove HAVE_COPY_THREAD_TLS")
commit aca52c3983 ("mm: remove CONFIG_HAVE_MEMBLOCK")
commit 3f08a302f5 ("mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option")
remove the mentioned config symbol, and enable the intended setup by
default without configuration.
Drop these obsolete selects in loongarch's Kconfig.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Use the fbcon_info_from_console() wrapper which was added to kernel
v5.19 with commit 409d6c95f9 ("fbcon: Introduce wrapper for console->fb_info lookup").
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Verify that the fbdev or drm driver correctly adjusted the virtual
screen sizes. On failure report the failing driver and reject the screen
size change.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v5.4+
We need to prevent that users configure a screen size which is smaller than the
currently selected font size. Otherwise rendering chars on the screen will
access memory outside the graphics memory region.
This patch adds a new function fbcon_modechange_possible() which
implements this check and which later may be extended with other checks
if necessary. The new function is called from the FBIOPUT_VSCREENINFO
ioctl handler in fbmem.c, which will return -EINVAL if userspace asked
for a too small screen size.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v5.4+
Prevent that users set a font size which is bigger than the physical screen.
It's unlikely this may happen (because screens are usually much larger than the
fonts and each font char is limited to 32x32 pixels), but it may happen on
smaller screens/LCD displays.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v4.14+
Jason A. Donenfeld says:
====================
wireguard patches for 5.19-rc6
1) A few small fixups to the selftests, per usual. Of particular note is
a fix for a test flake that occurred on especially fast systems that
boot in less than a second.
2) An addition during this cycle of some s390 crypto interacted with the
way wireguard selects dependencies, resulting in linker errors
reported by the kernel test robot. So Vladis sent in a patch for
that, which also required a small preparatory fix moving some Kconfig
symbols around.
====================
Link: https://lore.kernel.org/r/20220707003157.526645-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Select the new implementation of CHACHA20 for S390 when available.
It is faster than the generic software implementation, but also prevents
some linker errors in certain situations.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-kernel/202207030630.6SZVkrWf-lkp@intel.com/
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Various accelerated software implementation Kconfig values for S390 were
mistakenly placed into drivers/crypto/Kconfig, even though they're
mainly just SIMD code and live in arch/s390/crypto/ like usual. This
gives them the very unusual dependency on CRYPTO_HW, which leads to
problems elsewhere.
This patch fixes the issue by moving the Kconfig values for non-hardware
drivers into the usual place in crypto/Kconfig.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This makes for faster tests, faster compile time, and allows us to ditch
ACPI finally.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These selftests are used for much more extensive changes than just the
wireguard source files. So always call the kernel's build file, which
will do something or nothing after checking the whole tree, per usual.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Not all platforms have an RTC, and rather than trying to force one into
each, it's much easier to just set a fixed time. This is necessary
because WireGuard's latest handshakes parameter is returned in wallclock
time, and if the system time isn't set, and the system is really fast,
then this returns 0, which trips the test.
Turning this on requires setting CONFIG_COMPAT_32BIT_TIME=y, as musl
doesn't support settimeofday without it.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
66e4c8d950 ("net: warn if transport header was not set") added
a check that triggers a warning in r8169, see [0].
The commit referenced in the Fixes tag refers to the change from
which the patch applies cleanly, there's nothing wrong with this
commit. It seems the actual issue (not bug, because the warning
is harmless here) was introduced with bdfa4ed681
("r8169: use Giant Send").
[0] https://bugzilla.kernel.org/show_bug.cgi?id=216157
Fixes: 8d520b4de3 ("r8169: work around RTL8125 UDP hw bug")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Tested-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/1b2c2b29-3dc0-f7b6-5694-97ec526d51a0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are UAF bugs caused by rose_t0timer_expiry(). The
root cause is that del_timer() could not stop the timer
handler that is running and there is no synchronization.
One of the race conditions is shown below:
(thread 1) | (thread 2)
| rose_device_event
| rose_rt_device_down
| rose_remove_neigh
rose_t0timer_expiry | rose_stop_t0timer(rose_neigh)
... | del_timer(&neigh->t0timer)
| kfree(rose_neigh) //[1]FREE
neigh->dce_mode //[2]USE |
The rose_neigh is deallocated in position [1] and use in
position [2].
The crash trace triggered by POC is like below:
BUG: KASAN: use-after-free in expire_timers+0x144/0x320
Write of size 8 at addr ffff888009b19658 by task swapper/0/0
...
Call Trace:
<IRQ>
dump_stack_lvl+0xbf/0xee
print_address_description+0x7b/0x440
print_report+0x101/0x230
? expire_timers+0x144/0x320
kasan_report+0xed/0x120
? expire_timers+0x144/0x320
expire_timers+0x144/0x320
__run_timers+0x3ff/0x4d0
run_timer_softirq+0x41/0x80
__do_softirq+0x233/0x544
...
This patch changes rose_stop_ftimer() and rose_stop_t0timer()
in rose_remove_neigh() to del_timer_sync() in order that the
timer handler could be finished before the resources such as
rose_neigh and so on are deallocated. As a result, the UAF
bugs could be mitigated.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220705125610.77971-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
usbnet_write_cmd_async() mixed up which buffers
need to be freed in which error case.
v2: add Fixes tag
v3: fix uninitialized buf pointer
Fixes: 877bd862f3 ("usbnet: introduce usbnet 3 command helpers")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220705125351.17309-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This will allow the trace event to know the full size of the data
intended to be copied and silence read overflow checks.
Reported-by: John Garry <john.garry@huawei.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixups for OpenRISC found during recent testing:
- An OpenRISC irqchip fix to stop acking level interrupts which was
causing issues on SMP platforms.
- A comment typo fix in our unwinder code.
-----BEGIN PGP SIGNATURE-----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=Uug/
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC fixes from Stafford Horne:
"Fixups for OpenRISC found during recent testing:
- An OpenRISC irqchip fix to stop acking level interrupts which was
causing issues on SMP platforms
- A comment typo fix in our unwinder code"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: unwinder: Fix grammar issue in comment
irqchip: or1k-pic: Undefine mask_ack for level triggered hardware
This became largish as it includes the pending ASoC fixes.
Almost all changes are device-specific small fixes, while many of
them are coverage for mixer issues that were detected by selftest.
In addition, usual suspects for HD/USB-audio are there.
-----BEGIN PGP SIGNATURE-----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=v73C
-----END PGP SIGNATURE-----
Merge tag 'sound-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became largish as it includes the pending ASoC fixes.
Almost all changes are device-specific small fixes, while many of them
are coverage for mixer issues that were detected by selftest. In
addition, usual suspects for HD/USB-audio are there"
* tag 'sound-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (43 commits)
ALSA: cs46xx: Fix missing snd_card_free() call at probe error
ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)
ALSA: usb-audio: Add quirk for Fiero SC-01
ALSA: hda/realtek: Add quirk for Clevo L140PU
ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices
ASoC: madera: Fix event generation for rate controls
ASoC: madera: Fix event generation for OUT1 demux
ASoC: cs47l15: Fix event generation for low power mux control
ASoC: cs35l41: Add ASP TX3/4 source to register patch
ASoC: dapm: Initialise kcontrol data for mux/demux controls
ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error
ASoC: cs35l41: Correct some control names
ASoC: wm5110: Fix DRE control
ASoC: wm_adsp: Fix event for preloader
MAINTAINERS: update ASoC Qualcomm maintainer email-id
ASoC: rockchip: i2s: switch BCLK to GPIO
ASoC: SOF: Intel: disable IMR boot when resuming from ACPI S4 and S5 states
ASoC: SOF: pm: add definitions for S4 and S5 states
ASoC: SOF: pm: add explicit behavior for ACPI S1 and S2
ASoC: SOF: Intel: hda: Fix compressed stream position tracking
...
Enable software clock gating flag in private data for SC7280
based platforms, which are soundwire 1.6.0 version based.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[vkoul: fix patch subystem tag]
Link: https://lore.kernel.org/r/1656659827-27450-3-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
As per hardware datasheet its recommended that we check the device
status before reading devid assigned by auto-enumeration.
Without this patch we see SoundWire devices with invalid enumeration
addresses on the bus.
Cc: stable@vger.kernel.org
Fixes: a6e6581942 ("soundwire: qcom: add auto enumeration support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220706095644.5852-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- Gracefully handle failure to request MMIO resources in the GICv3 driver
- Make a static key static in the Apple AIC driver
- Fix the Xilinx intc driver dependency on OF_ADDRESS
-----BEGIN PGP SIGNATURE-----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=YqtL
-----END PGP SIGNATURE-----
Merge tag 'irqchip-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zygnier:
- Gracefully handle failure to request MMIO resources in the GICv3 driver
- Make a static key static in the Apple AIC driver
- Fix the Xilinx intc driver dependency on OF_ADDRESS
Link: https://lore.kernel.org/all/20220701133531.1545319-1-maz@kernel.org
The conditional block for variants with a second clock should have set
minItems, not maxItems, which was already 2. Since clock-names requires
two items, this typo should not have caused any problems.
Fixes: edd14218bd ("dt-bindings: dmaengine: Convert Allwinner A31 and A64 DMA to a schema")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220702031903.21703-1-samuel@sholland.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Now that there is a way of enabling branch broadcast via perf, mention
the possible use cases and known limitations.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach<mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220511144601.2257870-5-james.clark@arm.com
In order to document the newly added branch_broadcast option, create a
table that links all of the config option formats to any existing docs.
That way when the branch broadcast docs are expanded they are accessible
from both places.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220511144601.2257870-4-james.clark@arm.com
This is to allow them to be referenced in a later commit. There was
also a mistake where sysFS was introduced as section 2, but numbered
as section 1. And vice versa for 'Using perf framework'. This can't
happen with unnumbered sections.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220511144601.2257870-3-james.clark@arm.com
When enabled, all taken branch addresses are output, even if the branch
was because of a direct branch instruction. This enables reconstruction
of the program flow without having access to the memory image of the
code being executed.
Use bit 8 for the config option which would be the correct bit for
programming ETMv3. Although branch broadcast can't be enabled on ETMv3
because it's not in the define ETM3X_SUPPORTED_OPTIONS, using the
correct bit might help prevent future collisions or allow it to be
enabled if needed.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220511144601.2257870-2-james.clark@arm.com
If CONFIG_OF is not enabled, default of_get_display_timing() returns an
errno, so include the header.
Fixes: 422b67e0b3 ("videomode: provide dummy inline functions for !CONFIG_OF")
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Image.dx gets wrong value because of missing '()'.
If xres == logo->width and n == 1, image.dx = -16.
Signed-off-by: Guiling Deng <greens9@163.com>
Fixes: 3d8b1933eb ("fbdev: fbmem: add config option to center the bootup logo")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Helge Deller <deller@gmx.de>
This reverts commit 284b4d93da.
When using TLS device offload and coming from tls_device_reencrypt()
flow, -EBADMSG error in tls_do_decryption() should not be counted
towards the TLSTlsDecryptError counter.
Move the counter increase back to the decrypt_internal() call site in
decrypt_skb_update().
This also fixes an issue where:
if (n_sgin < 1)
return -EBADMSG;
Errors in decrypt_internal() were not counted after the cited patch.
Fixes: 284b4d93da ("tls: rx: move counting TlsDecryptErrors for sync")
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mat Martineau says:
====================
mptcp: Path manager fixes for 5.19
The MPTCP userspace path manager is new in 5.19, and these patches fix
some issues in that new code.
Patches 1-3 fix path manager locking issues.
Patches 4 and 5 allow userspace path managers to change priority of
established subflows using the existing MPTCP_PM_CMD_SET_FLAGS generic
netlink command. Includes corresponding self test update.
Patches 6 and 7 fix accounting of available endpoint IDs and the
MPTCP_MIB_RMSUBFLOW counter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch increases MPTCP_MIB_RMSUBFLOW mib counter in userspace pm
destroy subflow function mptcp_nl_cmd_sf_destroy() when removing subflow.
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In mptcp_pm_nl_rm_addr_or_subflow() we always mark as available
the id corresponding to the just removed address.
The used bitmap actually tracks only the local IDs: we must
restrict the operation when a (local) subflow is removed.
Fixes: a88c9e4969 ("mptcp: do not block subflows creation on errors")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the testing sample (pm_nl_ctl) to exercise
the updated MPTCP_PM_CMD_SET_FLAGS command for userspace PMs to
issue MP_PRIO signals over the selected subflow.
E.g. ./pm_nl_ctl set 10.0.1.2 port 47234 flags backup token 823274047 rip 10.0.1.1 rport 50003
userspace_pm.sh has a new selftest that invokes this command.
Fixes: 259a834fad ("selftests: mptcp: functional tests for the userspace PM type")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates MPTCP_PM_CMD_SET_FLAGS to allow userspace PMs
to issue MP_PRIO signals over a specific subflow selected by
the connection token, local and remote address+port.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/286
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When setting up a subflow's flags for sending MP_PRIO MPTCP options, the
subflow socket lock was not held while reading and modifying several
struct members that are also read and modified in mptcp_write_options().
Acquire the subflow socket lock earlier and send the MP_PRIO ACK with
that lock already acquired. Add a new variant of the
mptcp_subflow_send_ack() helper to use with the subflow lock held.
Fixes: 067065422f ("mptcp: add the outgoing MP_PRIO support")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The in-kernel path manager code for changing subflow flags acquired both
the msk socket lock and the PM lock when possibly changing the "backup"
and "fullmesh" flags. mptcp_pm_nl_mp_prio_send_ack() does not access
anything protected by the PM lock, and it must release and reacquire
the PM lock.
By pushing the PM lock to where it is needed in mptcp_pm_nl_fullmesh(),
the lock is only acquired when the fullmesh flag is changed and the
backup flag code no longer has to release and reacquire the PM lock. The
change in locking context requires the MIB update to be modified - move
that to a better location instead.
This change also makes it possible to call
mptcp_pm_nl_mp_prio_send_ack() for the userspace PM commands without
manipulating the in-kernel PM lock.
Fixes: 0f9f696a50 ("mptcp: add set_flags command in PM netlink")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The user-space PM subflow removal path uses a couple of helpers
that must be called under the msk socket lock and the current
code lacks such requirement.
Change the existing lock scope so that the relevant code is under
its protection.
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/287
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov says:
====================
net: Fix police 'continue' action offload
TC act_police with 'continue' action had been supported by mlx5 matchall
classifier offload implementation for some time. However, 'continue' was
assumed implicitly and recently got broken in multiple places. Fix it in
both TC hardware offload validation code and mlx5 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Referenced commit prepared the code for upcoming extension that allows mlx5
to offload police action attached to flower classifier. However, with
regard to existing matchall classifier offload validation should be
reversed as FLOW_ACTION_CONTINUE is the only supported notexceed police
action type. Fix the problem by allowing FLOW_ACTION_CONTINUE for police
action and extend scan_tc_matchall_fdb_actions() to only allow such actions
with matchall classifier.
Fixes: d97b4b105c ("flow_offload: reject offload for all drivers with invalid police parameters")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Offloading police with action TC_ACT_UNSPEC was erroneously disabled even
though it was supported by mlx5 matchall offload implementation, which
didn't verify the action type but instead assumed that any single police
action attached to matchall classifier is a 'continue' action. Lack of
action type check made it non-obvious what mlx5 matchall implementation
actually supports and caused implementers and reviewers of referenced
commits to disallow it as a part of improved validation code.
Fixes: b8cd5831c6 ("net: flow_offload: add tc police action parameters")
Fixes: b50e462bc2 ("net/sched: act_police: Add extack messages for offload failure")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IOMMU driver shares the pasid table for PCI alias devices. When the
RID2PASID entry of the shared pasid table has been filled by the first
device, the subsequent device will encounter the "DMAR: Setup RID2PASID
failed" failure as the pasid entry has already been marked as present.
As the result, the IOMMU probing process will be aborted.
On the contrary, when any alias device is hot-removed from the system,
for example, by writing to /sys/bus/pci/devices/.../remove, the shared
RID2PASID will be cleared without any notifications to other devices.
As the result, any DMAs from those rest devices are blocked.
Sharing pasid table among PCI alias devices could save two memory pages
for devices underneath the PCIe-to-PCI bridges. Anyway, considering that
those devices are rare on modern platforms that support VT-d in scalable
mode and the saved memory is negligible, it's reasonable to remove this
part of immature code to make the driver feasible and stable.
Fixes: ef848b7e5a ("iommu/vt-d: Setup pasid entry for RID2PASID support")
Reported-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reported-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220623065720.727849-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220625133430.2200315-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Notifier calling chain uses priority to determine the execution
order of the notifiers or listeners registered to the chain.
PCI bus device hot add utilizes the notification mechanism.
The current code sets low priority (INT_MIN) to Intel
dmar_pci_bus_notifier and postpones DMAR decoding after adding
new device into IOMMU. The result is that struct device pointer
cannot be found in DRHD search for the new device's DMAR/IOMMU.
Subsequently, the device is put under the "catch-all" IOMMU
instead of the correct one. This could cause system hang when
device TLB invalidation is sent to the wrong IOMMU. Invalidation
timeout error and hard lockup have been observed and data
inconsistency/crush may occur as well.
This patch fixes the issue by setting a positive priority(1) for
dmar_pci_bus_notifier while the priority of IOMMU bus notifier
uses the default value(0), therefore DMAR decoding will be in
advance of DRHD search for a new device to find the correct IOMMU.
Following is a 2-step example that triggers the bug by simulating
PCI device hot add behavior in Intel Sapphire Rapids server.
echo 1 > /sys/bus/pci/devices/0000:6a:01.0/remove
echo 1 > /sys/bus/pci/rescan
Fixes: 59ce0515cd ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope")
Cc: stable@vger.kernel.org # v3.15+
Reported-by: Zhang, Bernice <bernice.zhang@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Yian Chen <yian.chen@intel.com>
Link: https://lore.kernel.org/r/20220521002115.1624069-1-yian.chen@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The decompressed kernel initially relies on the identity map set up by
the boot/compressed kernel for accessing things like boot_params. With
the recent introduction of SEV-SNP support, the decompressed kernel
also needs to access the setup_data entries pointed to by
boot_params->hdr.setup_data.
This can lead to a crash in the kexec kernel during early boot due to
these entries not currently being included in the initial identity map,
see thread at Link below.
Include mappings for the setup_data entries in the initial identity map.
[ bp: Massage commit message and use a helper var for better readability. ]
Fixes: b190a043c4 ("x86/sev: Add SEV-SNP feature detection/setup")
Reported-by: Jun'ichi Nomura <junichi.nomura@nec.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/TYCPR01MB694815CD815E98945F63C99183B49@TYCPR01MB6948.jpnprd01.prod.outlook.com
Validate software clock gating required or not and do software
clock gating on hclk if soundwire is operational and keep it
running by adding flag in private data structure.
This is to avoid conflict between older architectures,
where software clock gating is not required and on latest
architectures, where software clock gating is mandatory.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1656659827-27450-2-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for controlling soundwire audio CGCR interface using clock
framework to make hclk ungating with software. As per new hardware
changes, software has to always ungate hclk if soundwire is operational
and keep it running. This requirement is for latest LPASS chipsets for
RX, TX and WSA path to work.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Link: https://lore.kernel.org/r/1652877755-25120-1-git-send-email-quic_srivasam@quicinc.com
[vkoul: change patch subsystem tag]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
During the card registration, transactions on the SoundWire bus can be
initiated. If the ALSA card is registered after the bus suspends,
timeouts can be seen while reading/writing codec registers. This is
extremely easy to reproduce in driver bind/unbind tests.
In an initial experiment, the ASoC soc-component.c code was modified
to initiate a pm_runtime resume on a component probe. The results
showed this was too invasive. Instead this patch suggests resuming the
SoundWire component only.
Because of the parent-child hierarchy enforced by the pm_runtime
framework, it can be argued that the codec component probe should be
enough to resume all necessary devices, and indeed the same resume
will be applied to SoundWire codecs used on Intel platforms.
Calling pm_runtime_resume() on both the Intel and codec sides has the
benefit of resuming the bus without assuming any order during the card
registration. The first component on a dailink to be probed will
resume the bus. In addition, if a codec driver did not implement this
transition, the Intel component would still resume the bus and avoid
timeouts on card registration.
BugLink: https://github.com/thesofproject/linux/issues/3651
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220621225641.221170-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tiezhu Yang