With the unnecessary restriction to reserve memory for fadump at the
top of RAM forgone, update the documentation accordingly.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, the area to preserve boot memory is reserved at the top of
RAM. This leaves fadump vulnerable to memory hot-remove operations. As
memory for fadump has to be reserved early in the boot process, fadump
can't be registered after a memory hot-remove operation. Though this
problem can't be eleminated completely, the impact can be minimized by
reserving memory at an offset closer to bottom of the RAM. The offset
for fadump memory reservation can be any value greater than fadump boot
memory size.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
OPAL returns OPAL_WRONG_STATE upon failing to provide sensor data due to
core sleeping/offline. Add a check in opal_get_sensor_data() for sensor
read failure with OPAL_WRONG_STATE return code and return -EIO.
Signed-off-by: Vipin K Parashar <vipin@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For the current task, the kernel stack would only tell the last time the
process was rescheduled, if ever. Use the current stack pointer for the
current task.
Otherwise, every once in a while, the stacktrace printed when reading
/proc/self/stack would look like the process is running in userspace,
while it's not, which some may consider as a bug.
This is also consistent with some other architectures, like x86 and arm,
at least.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
cpu_ready_for_interrupts() is called after feature patching, so there's
no need to use early_cpu_has_feature().
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The config option for the POWER8 crc32c recently changed from
CONFIG_CRYPT_CRC32C_VPMSUM to CONFIG_CRYPTO_CRC32C_VPMSUM. Update
the configs.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Most people use perf these days, so save about 31kB by making oprofile
a module.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
It turns out cloud-config uses ISO9660 filesystems to inject
configuration data into cloud images. The cloud-config failures when
ISO9660_FS is not enabled are cryptic, and building it in makes
mainline testing easier, so re-enable it.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 adds form 1 scoms. The form of the indirection is specified in
the top nibble of the scom address.
Currently we do some (ugly) bit mangling so that we can fit a 64 bit
scom address into the debugfs interface. The current code only shifts
the top bit (indirect bit).
This patch changes it to shift the whole top nibble so that the form
of the indirection is also shifted.
This patch is backwards compatible with older scoms.
(This change isn't required in the arch/powerpc/platforms/powernv/opal-prd.c
scom interface as it passes the whole 64bit scom address without any bit
mangling)
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the code to perform an OPAL call is duplicated between the
normal path and path taken when tracepoints are enabled. There's no
real need for this and combining them makes opal_tracepoint_entry
considerably easier to understand.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the xmon debugger is set only via kernel boot command-line.
It's disabled by default, and can be enabled with "xmon=on" on the
command-line. Also, xmon may be accessed via sysrq mechanism.
But we cannot enable/disable xmon in runtime, it needs kernel reload.
This patch introduces a debugfs entry for xmon, allowing user to query
its current state and change it if desired. Basically, the "xmon" file
to read from/write to is under the debugfs mount point, on powerpc
directory. It's a simple attribute, value 0 meaning xmon is disabled
and value 1 the opposite. Writing these states to the file will take
immediate effect in the debugger.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The xmon parameter nobt was added long time ago, by commit 26c8af5f01
("[POWERPC] print backtrace when entering xmon"). The problem that time
was that during a crash in a machine with USB keyboard, xmon wouldn't
respond to commands from the keyboard, so printing the backtrace wouldn't
be possible.
Idea then was to show automatically the backtrace on xmon crash for the
first time it's invoked (if it recovers, next time xmon won't show
backtrace automatically). The nobt parameter was added _only_ to prevent
this automatic trace show. Seems long time ago USB keyboards didn't work
that well!
We don't need this parameter anymore, the feature of auto showing the
backtrace is interesting (imagine a case of auto-reboot script),
so this patch extends the functionality, by always showing the backtrace
automatically when xmon is invoked; it removes the nobt parameter too.
Also, this patch fixes __initdata placement on xmon_early and replaces
__initcall() with modern device_initcall() on sysrq handler.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Once xmon is triggered by sysrq-x, it is enabled always afterwards even
if it is disabled during boot. This will cause a system reset interrupt
fail to dump. So keep xmon in its original state after exit.
We have several ways to set xmon on or off.
1) by a build config CONFIG_XMON_DEFAULT.
2) by a boot cmdline with xmon or xmon=early or xmon=on to enable xmon
and xmon=off to disable xmon. This value will override that in step 1.
3) by a debugfs interface, as proposed in this patchset.
And this value can override those in step 1 and 2.
Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER8 uses bit 36 in SRR1 like POWER9 for i-side machine checks, and
contains several conditions for link timeouts that are not currently
handled.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the handling (corrective action) of machine checks to the table
based evaluation.
This changes P7 and P8 ERAT flushing from using SLB flush to using ERAT
flush.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Have machine types define i-side and d-side tables to describe their
machine check encodings, and match entries to evaluate (for reporting)
machine checks.
Functionality is mostly unchanged (tested with a userspace harness), but
it does make a change in that it no longer records DAR as the effective
address for those errors where it is specified to be invalid (which is a
reporting change only).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the flush function introduced with the POWER9 machine check handler
for POWER7 and 8, rather than open coding it multiple times in callers.
There is a specific ERAT flush type introduced for POWER9, but the
POWER7-8 ERAT errors continue to do SLB flushing (which also flushes
ERAT), so as not to introduce functional changes with this cleanup
patch.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Print the faulting address of the machine check that may help with
debugging. The effective address reported can be a target memory address
rather than the faulting instruction address.
Fix up a dangling bracket while here.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We'd like to eventually remove NO_IRQ on powerpc, so remove usages of it
from electra_cf.c which is a powerpc-only driver.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Submitters of device tree binding documentation may forget to CC
the subsystem maintainer if this is missing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The symbols exported for use by MOL/rtlinux aren't getting CRCs and I
was about to fix that. But MOL is dead upstream, and the latest work on
it was to make it use KVM instead of its own kernel module. So remove
them instead.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since the fault retry is now handled earlier, we can release the
mmap_sem lock earlier too and remove later unlocking previously done in
mm_fault_error().
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In do_page_fault() if handle_mm_fault() returns VM_FAULT_RETRY, retry
the page fault handling before anything else.
This would simplify the handling of the mmap_sem lock in this part of
the code.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PNV_IODA_PE_DEV is only used for NPU devices (emulated PCI bridges
representing NVLink). These are added to IOMMU groups with corresponding
NVIDIA devices after all non-NPU PEs are setup; a special helper -
pnv_pci_ioda_setup_iommu_api() - handles this in pnv_pci_ioda_fixup().
The pnv_pci_ioda2_setup_dma_pe() helper sets up DMA for a PE. It is called
for VFs (so it does not handle NPU case) and PCI bridges but only
IODA1 and IODA2 types. An NPU bridge has its own type id (PNV_PHB_NPU)
so pnv_pci_ioda2_setup_dma_pe() cannot be called on NPU and therefore
(pe->flags & PNV_IODA_PE_DEV) is always "false".
This removes not used iommu_add_device(). This should not cause any
behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The iommu_table_ops callbacks are declared CPU endian as they take and
return "unsigned long"; underlying hardware tables are big-endian.
However get() was missing be64_to_cpu(), this adds the missing conversion.
The only caller of this is crash dump at arch/powerpc/kernel/iommu.c,
iommu_table_clear() which only compares TCE to zero so this change
should not cause behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Sparse emits a warning: symbol 'prepare_ftrace_return' was not
declared. Should it be static? prepare_ftrace_return() is called from
assembler and should not be static.
Add a prototype for it to asm-prototypes.h and include that in ftrace.c.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Sparse emits two symbol not declared warnings for swsusp.c. The two
functions, save_processor_state() and restore_processor_state() are
declared already in suspend.h, so include it.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
struct hcall_stats is only used in hvCall_inst.c, so move it there.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is a very basic test of the new cache shape AUXV entries. All it
does at the moment is look for the entries and error out if we don't
find all the ones we expect. Primarily intended for folks bringing up a
new chip to check that the cache info is making it all the way to
userspace correctly.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Refactor the AUXV routines so they are more composable. In a future test
we want to look for many AUXV entries and we don't want to have to read
/proc/self/auxv each time.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fix an assembler error when the THREAD_SIZE is greater than 16k.
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Shift the logic for defining THREAD_SHIFT logic to Kconfig in order to
allow override by users.
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This BUG_ON() triggered for me once at shutdown, and I don't see a
reason for the check. The code correctly checks whether the swap slot
cache is usable or not, so an uninitialized swap slot cache is not
actually problematic afaik.
I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since
I'm not sure why that seemingly pointless check was there. I suspect
the real fix is to just remove it entirely, but for now we'll warn about
it but not bring the machine down.
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Wire up statx() syscall
- Don't print a warning on memory hotplug when HPT resizing isn't available
Thanks to:
David Gibson, Chandan Rajendra.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=TfiW
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc fixes from Michael Ellerman:
"A couple of minor powerpc fixes for 4.11:
- wire up statx() syscall
- don't print a warning on memory hotplug when HPT resizing isn't
available
Thanks to: David Gibson, Chandan Rajendra"
* tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Don't give a warning when HPT resizing isn't available
powerpc: Wire up statx() syscall
Pull parisc fixes from Helge Deller:
- Mikulas Patocka added support for R_PARISC_SECREL32 relocations in
modules with CONFIG_MODVERSIONS.
- Dave Anglin optimized the cache flushing for vmap ranges.
- Arvind Yadav provided a fix for a potential NULL pointer dereference
in the parisc perf code (and some code cleanups).
- I wired up the new statx system call, fixed some compiler warnings
with the access_ok() macro and fixed shutdown code to really halt a
system at shutdown instead of crashing & rebooting.
* 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix system shutdown halt
parisc: perf: Fix potential NULL pointer dereference
parisc: Avoid compiler warnings with access_ok()
parisc: Wire up statx system call
parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range
parisc: support R_PARISC_SECREL32 relocation in modules
Pull SCSI target fixes from Nicholas Bellinger:
"The bulk of the changes are in qla2xxx target driver code to address
various issues found during Cavium/QLogic's internal testing (stable
CC's included), along with a few other stability and smaller
miscellaneous improvements.
There are also a couple of different patch sets from Mike Christie,
which have been a result of his work to use target-core ALUA logic
together with tcm-user backend driver.
Finally, a patch to address some long standing issues with
pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices,
which will make folks using physical (or virtual) magnetic tape happy"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits)
qla2xxx: Update driver version to 9.00.00.00-k
qla2xxx: Fix delayed response to command for loop mode/direct connect.
qla2xxx: Change scsi host lookup method.
qla2xxx: Add DebugFS node to display Port Database
qla2xxx: Use IOCB interface to submit non-critical MBX.
qla2xxx: Add async new target notification
qla2xxx: Export DIF stats via debugfs
qla2xxx: Improve T10-DIF/PI handling in driver.
qla2xxx: Allow relogin to proceed if remote login did not finish
qla2xxx: Fix sess_lock & hardware_lock lock order problem.
qla2xxx: Fix inadequate lock protection for ABTS.
qla2xxx: Fix request queue corruption.
qla2xxx: Fix memory leak for abts processing
qla2xxx: Allow vref count to timeout on vport delete.
tcmu: Convert cmd_time_out into backend device attribute
tcmu: make cmd timeout configurable
tcmu: add helper to check if dev was configured
target: fix race during implicit transition work flushes
target: allow userspace to set state to transitioning
target: fix ALUA transition timeout handling
...
Pull device-dax fixes from Dan Williams:
"The device-dax driver was not being careful to handle falling back to
smaller fault-granularity sizes.
The driver already fails fault attempts that are smaller than the
device's alignment, but it also needs to handle the cases where a
larger page mapping could be established. For simplicity of the
immediate fix the implementation just signals VM_FAULT_FALLBACK until
fault-size == device-alignment.
One fix is for -stable to address pmd-to-pte fallback from the
original implementation, another fix is for the new (introduced in
4.11-rc1) pud-to-pmd regression, and a typo fix comes along for the
ride.
These have received a build success notification from the kbuild
robot"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: fix debug output typo
device-dax: fix pud fault fallback handling
device-dax: fix pmd/pte fault fallback handling
Current driver wait for FW to be in the ready state before
processing in-coming commands. For Arbitrated Loop or
Point-to- Point (not switch), FW Ready state can take a while.
FW will transition to ready state after all Nports have been
logged in. In the mean time, certain initiators have completed
the login and starts IO. Driver needs to start processing all
queues if FW is already started.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
For target mode, when new scsi command arrive, driver first performs
a look up of the SCSI Host. The current look up method is based on
the ALPA portion of the NPort ID. For Cisco switch, the ALPA can
not be used as the index. Instead, the new search method is based
on the full value of the Nport_ID via btree lib.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
The Mailbox interface is currently over subscribed. We like
to reserve the Mailbox interface for the chip managment and
link initialization. Any non essential Mailbox command will
be routed through the IOCB interface. The IOCB interface is
able to absorb more commands.
Following commands are being routed through IOCB interface
- Get ID List (007Ch)
- Get Port DB (0064h)
- Get Link Priv Stats (006Dh)
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
If the remote port have started the login process, then the
PLOGI and PRLI should be back to back. Driver will allow
the remote port to complete the process. For the case where
the remote port decide to back off from sending PRLI, this
local port sets an expiration timer for the PRLI. Once the
expiration time passes, the relogin retry logic is allowed
to go through and perform login with the remote port.
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Hari Bathini