Commit Graph

90 Commits

Author SHA1 Message Date
Guenter Roeck 4573acbc46 hwmon: (it87) Make temp3 attribute conditional for IT8782F
On IT8782F, temp3 is only supported if UART6 is disabled.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-05-22 06:48:49 -07:00
Guenter Roeck 62a1d05f0e hwmon: (it87) Convert to use devm_kzalloc and devm_request_region
This makes the code a bit simpler and smaller.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-05-22 06:48:48 -07:00
Guenter Roeck 9172b5d124 hwmon: (it87) Create voltage attributes only if voltage is enabled
On IT8782F and IT8783F, some voltage input pins may be disabled. Don't create
sysfs attribute files if that is the case.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-05-20 19:41:50 -07:00
Guenter Roeck 0531d98b1f hwmon: (it87) Add support for IT8782F and IT8783E/F
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-05-20 19:41:48 -07:00
Guenter Roeck 3c4c497191 hwmon: (it87) Constify fixed string arrays
Make checkpatch happy by constifying fixed string arrays.

Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-18 18:26:58 -07:00
Guenter Roeck 4a0d71cfdc hwmon: (it87) Fix multi-line comments
Fix multi-line comments, and clean up some of the affected comments.

Cc: Jean Delvare <khali@linux-fr.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:26:53 -07:00
Jean Delvare 16b5dda22e hwmon: (it87) Add IT8728F support
Until we get a datasheet for the IT8728F, treat it as fully compatible
with the IT8721F, as it seems to work reasonably well.

This closes kernel bug #27262.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16 22:51:48 +01:00
Rusty Russell 90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Frans Meulenbroeks 179c4fdb56 hwmon: replaced strict_str* with kstr*
replaced strict_strtol with kstrtol and
replaced strict_strtuol with kstrtuol

This satisfies checkpatch -f
Compile tested only: no warnings or errors given

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05 08:19:34 -08:00
Jean Delvare 3d30f9e69f hwmon: (it87) Add chassis intrusion detection support
Add chassis intrusion detection support for all supported devices,
using the standard interface.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-25 21:46:10 +02:00
Jean Delvare fa8b69758e hwmon: (it87) Fix label group removal
A copy-and-paste error caused it87_attributes_vid to be referenced
where it87_attributes_label should be. Thankfully the group is only
used for attribute removal, not attribute creation, so the effects of
this bug are limited, but let's fix it still.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-17 18:39:19 +02:00
Nat Gurumoorthy 5b0380c94a hwmon: (it87) Use request_muxed_region
Serialize access to the hardware by using "request_muxed_region" macro
defined by Alan Cox. Call to this macro will hold off the requestor if
the resource is currently busy. "superio_enter" will return an error
if call to "request_muxed_region" fails. Rest of the code change is to
ripple an error return from superio_enter to the top level.

Signed-off-by: Nat Gurumoorthy <natg@google.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25 20:43:33 +02:00
Joe Perches a8ca103793 hwmon: (it87) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:10 +01:00
Jean Delvare 6229cdb236 hwmon: (it87) Fix manual fan speed control on IT8721F
The manual fan speed control logic of the IT8721F is much different
from what older devices had. Update the code to properly support that.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-12-08 16:27:22 +01:00
Jean Delvare 44c1bcd4bc hwmon: (it87) Add support for the IT8721F/IT8758E
Add support for the IT8721F/IT8758E. These new chips differ from the
older IT87xxF chips in the following ways:
* ADC LSB is 12 mV instead of 16 mV.
* PWM values are 8-bit instead of 7-bit.
There are other minor changes we don't have to care about in the
driver.

Another change is that we will handle internal voltage scaling in the
driver instead of delegating the work to user-space.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:51 +02:00
Jean Delvare 0df6454da9 hwmon: (it87) Move conversion functions
Move conversion functions until after structure defintions. This is
needed for future changes which make use of the structures in the
conversion funtcions.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:51 +02:00
Jean Delvare 738e5e0536 hwmon: (it87) Export labels for internal sensors
Some voltage sensors can be wired internally to the IT87xxF chip's own
power supply channels. In that case, we can inform user-space that the
wiring is known by exporting proper labels for these sensors.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14 21:08:50 +02:00
Jean Delvare 436cad2a41 hwmon: (it87) Fix in7 on IT8720F
The IT8720F has no VIN7 pin, so VCCH should always be routed
internally to VIN7 with an internal divider. Curiously, there still
is a configuration bit to control this, which means it can be set
incorrectly. And even more curiously, many boards out there are
improperly configured, even though the IT8720F datasheet claims that
the internal routing of VCCH to VIN7 is the default setting. So we
force the internal routing in this case.

It turns out that all boards with the wrong setting are from Gigabyte,
so I suspect a BIOS bug. But it's easy enough to workaround in the
driver, so let's do it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jean-Marc Spaggiari <jean-marc@spaggiari.org>
Cc: stable@kernel.org
2010-07-09 16:22:48 +02:00
Jean Delvare 2b3d1d87ea hwmon: (it87) Invalidate cache on temperature sensor change
When any temperature sensor type is changed, the corresponding
temperature value needs to be updated. The register caching mechanism
may delay this update, so we want to invalidate the cache to force an
immediate update.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-04-14 16:14:10 +02:00
Jean Delvare 8acf07c5a7 hwmon: (it87) Properly handle wrong sensor type requests
Currently, if someone tries to set the thermal sensor type to an
unsupported value, subsequent accesses to the chip may temporarily
show the sensor in question as disabled. Use a temporary variable
and only update the cached value on success, to prevent such
confusion.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-04-14 16:14:09 +02:00
Jean Delvare a00afb97e2 hwmon: (it87) Don't arbitrarily enable temperature channels
Temperature channels can be used in 2 different modes (thermistor and
thermal diode) and we don't know which one, if any, is correct for
every given board. So don't arbitrarily choose one. Instead, leave the
temperature channels untouched. They can be configured from user-space
if needed anyway.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-04-14 16:14:09 +02:00
Jean Delvare cccfc9c4bb hwmon: (it87) Validate auto pwm settings
Before switching to automatic fan control mode, make sure that all the
trip points make sense. Otherwise, the control loop could lead to
weird fan behavior.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:21 +01:00
Jean Delvare 4f3f51bc21 hwmon: (it87) Add support for old automatic fan speed control
Add support for the automatic fan speed control interface as
implemented by IT8705F chips up to revision F and IT8712F chips up to
revision G. This implementation fits very well in our standard sysfs
interface.

I implemented the old and not the new interface because the only chip
I have at hand is an old one, and the new interface is more difficult
to map to the standard sysfs interface. Adding support later should be
possible though, if someone with a supported chip is interested.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:21 +01:00
Jean Delvare f5f64501e4 hwmon: (it87) Use strict_strtol instead of simple_strtol
For consistency and robustness, use strict_strtol instead of
simple_strtol.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:19 +01:00
Jean Delvare 5f2dc798ca hwmon: (it87) Fix many checkpatch errors and warnings
Fix 20 errors and 11 warnings reported by the checkpatch script. The
remainining errors would require more work. The remaining warnings
will be addressed later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:18 +01:00
Jean Delvare d9b327c310 hwmon: (it87) Add support for beep on alarm
The IT87xxF chips support beeping on alarm, if properly wired and
configured. There is one control bit for each input type (temperature,
fan, voltage.) Let the user see and change them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:17 +01:00
Jean Delvare 6a8d7acfbe hwmon: (it87) Create vid attributes by group
Only VID-related attributes are left in it87_attributes_opt, so we
might as well rename it to it87_attributes_vid and use this group to
create all attributes at once.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:16 +01:00
Jean Delvare 723a0aa0a1 hwmon: (it87) Refactor attributes creation and removal
There is a lot of code redundancy in the creation of the fan and
pwm attributes. Move these attributes to arrays so that the code can
be simplified.

This in turns makes the attributes removal code larger, so move it to
a separate function that can be called in both the standard removal
case and the error path during probing.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:16 +01:00
Jean Delvare 94ac7ee616 hwmon: (it87) Expose the PWM/temperature mappings
Let the user read the PWM-to-temperature mappings. Until the trip
points are also exposed, this is essentially a way to know how the
BIOS has set things up. The ability to change the settings will be
added later, together with the trip points.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:16 +01:00
Jean Delvare b99883dcd5 hwmon: (it87) Display fan outputs in automatic mode as such
The it87 driver doesn't yet support automatic fan control. Let it at
least tell the user when a fan output is in automatic mode. Also let
the user switch from automatic mode (possibly set by the BIOS) to
manual mode and back without losing the settings.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05 22:17:15 +01:00
Jean Delvare 591ec6509e hwmon: (it87) Check for fan2 and fan3 availability
The fan2 and fan3 input and output pins can be used as GPIOs. Check
their function before exposing their sysfs attributes and accessing
their registers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-12-09 20:35:48 +01:00
Jean Delvare 895ff26768 hwmon: (it87) Verify the VID pin usage
The VID input pins can alternatively be used as GPIOs. Make sure we
have at least 4 pins used for VID, otherwise don't bother reading and
exposing VID.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Adam Nielsen <a.nielsen@shikadi.net>
2009-12-09 20:35:47 +01:00
Jean Delvare 371dc4a6d8 hwmon: (it87) Fix VID reading on IT8718F/IT8720F
Comparing apples to bananas doesn't seem right. Consistently use the
chips enum for chip type comparisons, to avoid such bugs in the
future.

The bug has been there since support for the IT8718F was added, so
VID never worked for this chip nor for the similar IT8720F.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-10-24 13:28:47 +02:00
H Hartley Sweeten 6055fae8ac hwmon: Include <linux/io.h> instead of <asm/io.h>
Drivers should be including <linux/io.h> instead of <asm/io.h>.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Alistair John Strachan <alistair@devzero.co.uk>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Cc: Juerg Haefliger <juergh@gmail.com>
Cc: Frank Seidel <frank@f-seidel.de>
Acked-by: Jim Cromie <jim.cromie@gmail.com>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Roger Lucas <vt8231@hiddenengine.co.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-15 17:18:13 +02:00
Jean Delvare e267d25005 hwmon: (it87) Properly decode -128 degrees C temperature
The it87 driver is reporting -128 degrees C as +128 degrees C.
That's not a terribly likely temperature value but let's still
get it right, especially when it simplifies the code.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-12 13:36:39 +01:00
Jean Delvare 77fa49d94a hwmon: Fix various typos
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: David Hubbard <david.c.hubbard@gmail.com>
2009-01-07 16:37:35 +01:00
Jean Delvare b9acb64a38 hwmon: Check for ACPI resource conflicts
Check for ACPI resource conflicts in hwmon drivers. I've included
all Super-I/O and PCI drivers.

I've voluntarily left out:
* Vendor-specific drivers: if they conflicted on any system, this would
  pretty much mean that they conflict on all systems, and we would know
  by now.
* Legacy ISA drivers (lm78 and w83781d): they only support chips found
  on old designs were ACPI either wasn't supported or didn't deal with
  thermal management.
* Drivers accessing the I/O resources indirectly (e.g. through SMBus):
  the checks are already done where they belong, i.e. in the bus drivers.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: David Hubbard <david.c.hubbard@gmail.com>
2009-01-07 16:37:35 +01:00
Jean-Marc Spaggiari b4da93e4b0 hwmon: (it87) Add support for the ITE IT8720F
Allow it87.c to handle IT8720 chipset like IT8718 in order to
retrieve voltage, temperatures and fans speed from sensors
tools. Also updating the related documentation.

Signed-off-by: Jean-Marc Spaggiari <jean-marc@spaggiari.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-07 16:37:32 +01:00
Jean Delvare 4ed1077953 hwmon: (it87) Fix thermal sensor type values
The it87 driver doesn't follow the standard sensor type values as
documented in Documentation/hwmon/sysfs-interface. It uses value 2 for
thermistors instead of value 4. This causes "sensors" to tell the user
that the chip is setup for a transistor while it is actually setup for
a thermistor.

Using value 4 for thermistors solves the problem. For compatibility
reasons, we still accept value 2 but emit a warning message so that
users update their configuration files.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2008-10-17 17:51:16 +02:00
Jean Delvare 98dd22c3e0 hwmon: (it87) Prevent power-off on Shuttle SN68PT
On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan,
but to something else. One user has reported instant system power-off
when changing the PWM2 duty cycle, so we disable it.

I use the board name string as the trigger in case the same board is
ever used in other systems.

This closes lm-sensors ticket #2349:
pwmconfig causes a hard poweroff
http://www.lm-sensors.org/ticket/2349

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09 15:33:58 +02:00
Andrew Paprocki 859b9ef30c hwmon: (it87) Fix fan tachometer reading in IT8712F rev 0x7 (I)
The IT8712F v0.9.1 datasheet applies to revisions >= 0x8 (J).
The driver was incorrectly attempting to enable 16-bit fan
readings on rev 0x7 (I) which led to incorrect RPM values.

Signed-off-by: Andrew Paprocki <andrew@ishiboo.com>
Tested-by: John Gumb <john.gumb@tandberg.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-09-20 10:25:19 +02:00
Andrew Paprocki 816d8c6a25 hwmon: (it87) Support for 16-bit fan reading in it8705 >= rev 0x03
The it8705 chip supports 16-bit fan tachometers in revisions at least
>= 0x03 (Version G). This patch enables 16-bit fan readings on all
revisions >= 0x03 just like the it8712, it8716, and it8718 chips.

Signed-off-by: Andrew Paprocki <andrew@ishiboo.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06 22:41:06 +02:00
Andrew Paprocki 0475169c13 hwmon: (it87) Support for 16-bit fan reading in it8712 >= rev 0x07
The it8712 chip supports 16-bit fan tachometers in revisions >= 0x07.
Revisions >= 0x08 dropped support for 8-bit fan divisor registers. The
patch enables 16-bit fan readings on all revisions >= 0x07 just like
the it8716 and it8718 chips.

Signed-off-by: Andrew Paprocki <andrew@ishiboo.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06 22:41:06 +02:00
Jean Delvare d5b0b5d628 hwmon: (it87) Delete pwmN_freq files on driver removal
In commit f8d0c19a93 I forgot to delete
the pwmN_freq files on driver removal, here's the fix.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Riku Voipio <riku.voipio@movial.fi>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:43 -05:00
Jean Delvare 0124dd78e2 hwmon: (it87) Add individual alarm files
The new libsensors needs this.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:42 -05:00
Jean Delvare f1d8e33263 hwmon: (it87) Discard a dead e-mail address
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:42 -05:00
Jean Delvare 67b671bceb hwmon: Let the user override the detected Super-I/O device ID
While it is possible to force SMBus-based hardware monitoring chip
drivers to drive a not officially supported device, we do not have this
possibility for Super-I/O-based drivers. That's unfortunate because
sometimes newer chips are fully compatible and just forcing the driver
to load would work. Instead of that we have to tell the users to
recompile the kernel driver, which isn't an easy task for everyone.

So, I propose that we add a module parameter to all Super-I/O based
hardware monitoring drivers, letting advanced users force the driver
to load on their machine. The user has to provide the device ID of a
supposedly compatible device. This requires looking at the source code or
a datasheet, so I am confident that users can't randomly force a driver
without knowing what they are doing. Thus this should be relatively safe.

As you can see from the code, the implementation is pretty simple and
unintrusive.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07 20:39:42 -05:00
Bjorn Helgaas 87b4b6634a hwmon: (it87) request only Environment Controller ports
The IT8705F and related parts are Super I/O controllers that contain
many separate devices.

Some BIOSes describe IT8705F I/O port usage under a motherboard device
(PNP0C02) with overlapping regions, e.g., 0x290-0x29f and 0x290-0x294.

The it87 driver supports only the Environment Controller, which requires
only two ISA ports, but it used to request an eight-port range.  If that
range exceeds a range reported by the BIOS, as 0x290-0x297 would, the
request fails, and the it87 driver cannot claim the device.

This patch makes the it87 driver request only the two ports used for the
Environment Controller device.

Systems where this problem has been reported:
    Gigabyte GA-K8N Ultra 9
    Gigabyte M56S-S3
    Gigabyte GA-965G-DS3

Kernel bug reports:
    http://bugzilla.kernel.org/show_bug.cgi?id=9514
    http://lkml.org/lkml/2007/12/4/466

Related change:
    http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=a7839e960675b549f06209d18283d5cee2ce9261

    The patch above increases the number of PNP port resources we support.
    Prior to this patch, we ignored some port resources, which masked the
    it87 problem.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-01-22 07:21:38 -05:00
Jean Delvare 90d6619a91 hwmon: VRM is not read from registers
The VRM value is not read from chip registers, so there's no need
to update the device data cache before exporting the VRM value to
user-space.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-09 22:56:32 -04:00
Jean Delvare c7f1f7166a hwmon: (it87) Add support for fan4 and fan5
Add support for the IT8716F and IT8718F fan4 and fan5. The late
revisions of the IT8712F have these too but support is harder to add
and nobody asked for it yet, so I didn't include it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-09 22:56:30 -04:00