Commit Graph

29230 Commits

Author SHA1 Message Date
Heiko Carstens ca9fc75a68 [S390] convert s390 to generic IPI infrastructure
Since etr/stp don't need the old smp_call_function semantics anymore
we can convert s390 to the generic IPI infrastructure.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25 13:38:56 +01:00
Martin Schwidefsky 0b3016b781 [S390] serialize stp/etr work
The work function dispatched with schedule_work() can be run twice
on different cpus because run_workqueue clears the WORK_STRUCT_PENDING
bit and then executes the function. Another cpu can call schedule_work()
again and run the work function a second time before the first call
is completed. This patch serialized the etr and stp work function with
a mutex.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25 13:38:56 +01:00
Heiko Carstens 750887dedc [S390] convert etr/stp to stop_machine interface
This converts the etr and stp code to the new stop_machine interface
which allows to synchronize all cpus without allocating any memory.
This way we get rid of the only reason why we haven't converted s390
to the generic IPI interface yet.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25 13:38:55 +01:00
Martin Schwidefsky b020632e40 [S390] introduce vdso on s390
Add a vdso to speed up gettimeofday and clock_getres/clock_gettime for
CLOCK_REALTIME/CLOCK_MONOTONIC.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25 13:38:55 +01:00
Martin Schwidefsky fc5243d98a [S390] arch_setup_additional_pages arguments
arch_setup_additional_pages currently gets two arguments, the binary
format descripton and an indication if the process uses an executable
stack or not. The second argument is not used by anybody, it could
be removed without replacement.

What actually does make sense is to pass an indication if the process
uses the elf interpreter or not. The glibc code will not use anything
from the vdso if the process does not use the dynamic linker, so for
statically linked binaries the architecture backend can choose not
to map the vdso.

Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25 13:38:54 +01:00
Heiko Carstens f414f5f153 [S390] cpu topology: dont destroy cpu sets on topology change
Call rebuild_sched_domains instead of arch_reinit_sched_domains if
cpu topology changes. This leaves cpu sets alone which otherwise would
be destroyed.
If and how it makes sense to define cpu sets on a virtualized
architecture is another question.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25 13:38:07 +01:00
Al Viro 8f2961c39e [S390] audit: get s390 ret_from_fork in sync with other architectures
On s390 we have ret_from_fork jump not to the "do all work we
normally do on return from syscall" as on x86, ppc, etc., but to the
"do all such work except audit".  Historical reasons - the codepath
triggered when we have AUDIT process flag set is separated from the
normall one and they converge at sysc_return, which is the common
part of post-syscall work.  And does not include calling audit_syscall_exit() -
that's done in the end of sysc_tracesys path, just before that path jumps
to sysc_return.

	IOW, the child returning from fork()/clone()/vfork() doesn't
call audit_syscall_exit() at all, so no matter what we do with its
audit context, we are not going to see the audit entry.

	The fix is simple: have ret_from_fork go to the point just past
the call of sys_.... in the 'we have AUDIT flag set' path.  There we
have (64bit variant; for 31bit the situation is the same):
sysc_tracenogo:
        tm      __TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
        jz      sysc_return
        la      %r2,SP_PTREGS(%r15)     # load pt_regs
        larl    %r14,sysc_return        # return point is sysc_return
        jg      do_syscall_trace_exit
which is precisely what we need - check the flag, bugger off to sysc_return
if not set, otherwise call do_syscall_trace_exit() and bugger off to
sysc_return.  r9 has just been properly set by ret_from_fork itself,
so we are fine.

	Tested on s390x, seems to work fine.  WARNING: it's been about
16 years since my last contact with 3X0 assembler[1], so additional
review would be very welcome.  I don't think I've managed to screw it
up, but...

[1] that *was* in another country and besides, the box is dead...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25 13:38:07 +01:00
Heiko Carstens 5439050f9f [S390] cpu topology: fix cpu_core_map initialization
Common code doesn't call arch_update_cpu_topology() anymore on
cpu hotplug. But our architecture backend relied on that in order to
update the cpu_core_map. For machines without cpu topology support
this leads uninitialized cpu_core_maps for later on added cpus.

To solve this just initialize the maps with cpu_possible_map, since
that will be always valid for machines without topology support.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25 13:38:07 +01:00
Ingo Molnar 5250d329e3 Merge branches 'tracing/ftrace', 'tracing/hw-branch-tracing' and 'tracing/ring-buffer'; commit 'v2.6.28' into tracing/core 2008-12-25 13:11:00 +01:00
Ingo Molnar a3eeeefbf1 Merge branch 'x86/tsc' into tracing/core
Merge it to resolve this incidental conflict between the BTS fixes/cleanups
and changes in x86/tsc:

Conflicts:
	arch/x86/kernel/cpu/intel.c
2008-12-25 12:48:18 +01:00
Ingo Molnar 79a66b96c3 Merge branches 'x86/pat2' and 'x86/fpu'; commit 'v2.6.28' into x86/core 2008-12-25 11:50:41 +01:00
Jaswinder Singh 1fcccb008b x86: traps.c replace #if CONFIG_X86_32 with #ifdef CONFIG_X86_32
Impact: cleanup, avoid warning on X86_64

Fixes this warning on X86_64:

  CC      arch/x86/kernel/traps.o
  arch/x86/kernel/traps.c:695:5: warning: "CONFIG_X86_32" is not defined

Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-25 11:49:55 +01:00
Takashi Iwai 5c8261e44e Merge branch 'topic/asoc' into to-push 2008-12-25 11:40:25 +01:00
Frederic Weisbecker 0ca59dd948 tracing/ftrace: don't trace on early stage of a secondary cpu boot, v3
Impact: fix a crash/hard-reboot on certain configs while enabling cpu runtime

On some archs, the boot of a secondary cpu can have an early fragile state.
On x86-64, the pda is not initialized on the first stage of a cpu boot but
it is needed to get the cpu number and the current task pointer. This data
is needed during tracing. As they were dereferenced at this stage, we got a
crash while tracing a cpu being enabled at runtime.

Some other archs like ia64 can have such kind of issue too.

Changes on v2:

We dropped the previous solution of a per-arch called function to guess the
current state of a cpu. That could slow down the tracing.

This patch removes the -pg flag on arch/x86/kernel/cpu/common.c where
the low level cpu boot functions exist, on start_secondary() and a helper
function used at this stage.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-25 09:39:22 +01:00
James Morris cbacc2c7f0 Merge branch 'next' into for-linus 2008-12-25 11:40:09 +11:00
Herbert Xu b7e8bdadce crypto: crc32c-intel - Switch to shash
This patch changes crc32c-intel to the new shash interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25 11:01:37 +11:00
Kent Liu 1c06da81a5 crypto: crc32c-intel - Update copyright head
The original copyright head for crc32c-intel.c is incorrect. Please merge
the patch to update it.

Signed-Off-By: Kent Liu <kent.liu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25 11:01:18 +11:00
Ingo Molnar 67be403d89 Revert "x86: disable X86_PTRACE_BTS"
This reverts commit 40f15ad8aa.

The CONFIG_X86_PTRACE_BTS bugs have been fixed via:

 c5dee61: x86, bts: memory accounting
 bf53de9: x86, bts: add fork and exit handling

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-24 21:08:37 +01:00
Ingo Molnar db8862eafe Merge branch 'linus' into tracing/hw-branch-tracing 2008-12-24 21:08:26 +01:00
Linus Torvalds 1806f82655 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: disable X86_PTRACE_BTS
2008-12-24 10:24:14 -08:00
Ingo Molnar 40f15ad8aa x86: disable X86_PTRACE_BTS
there's a new ptrace arch level feature in .28:

  config X86_PTRACE_BTS
  bool "Branch Trace Store"

it has broken fork() handling: the old DS area gets copied over into
a new task without clearing it.

Fixes exist but they came too late:

  c5dee61: x86, bts: memory accounting
  bf53de9: x86, bts: add fork and exit handling

and are queued up for v2.6.29. This shows that the facility is still not
tested well enough to release into a stable kernel - disable it for now and
reactivate in .29. In .29 the hardware-branch-tracer will use the DS/BTS
facilities too - hopefully resulting in better code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-24 10:49:51 +01:00
H. Peter Anvin c1c15b65ec x86: PAT: fix address types in track_pfn_vma_new()
Impact: cleanup, fix warning

This warning:

 arch/x86/mm/pat.c: In function track_pfn_vma_copy:
 arch/x86/mm/pat.c:701: warning: passing argument 5 of follow_phys from incompatible pointer type

Triggers because physical addresses are resource_size_t, not u64.

This really matters when calling an interface like follow_phys() which
takes a pointer to a physical address -- although on x86, being
littleendian, it would generally work anyway as long as the memory region
wasn't completely uninitialized.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-24 10:40:19 +01:00
Kyle McMartin 5289f46b9d parisc: disable UP-optimized flush_tlb_mm
flush_tlb_mm's "optimized" uniprocessor case of allocating a new
context for userspace is exposing a race where we can suddely return
to a syscall with the protection id and space id out of sync, trapping
on the next userspace access.

Debugged-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-23 17:03:21 -08:00
Ingo Molnar bed4f13065 Merge branch 'x86/irq' into x86/core 2008-12-23 16:30:31 +01:00
Ingo Molnar 3e5621edb3 Merge branch 'x86/iommu' into x86/core 2008-12-23 16:30:27 +01:00
Ingo Molnar be9a1d3c2e Merge branch 'x86/tsc' into x86/core 2008-12-23 16:30:20 +01:00
Ingo Molnar 7e3cbc3f77 Merge branch 'x86/ptrace' into x86/tsc
Conflicts:
	arch/x86/kernel/cpu/intel.c
2008-12-23 16:29:31 +01:00
Ingo Molnar fa623d1b02 Merge branches 'x86/apic', 'x86/cleanups', 'x86/cpufeature', 'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/detect-hyper', 'x86/doc', 'x86/dumpstack', 'x86/early-printk', 'x86/fpu', 'x86/idle', 'x86/io', 'x86/memory-corruption-check', 'x86/microcode', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/pat2', 'x86/pci-ioapic-boot-irq-quirks', 'x86/ptrace', 'x86/quirks', 'x86/reboot', 'x86/setup-memory', 'x86/signal', 'x86/sparse-fixes', 'x86/time', 'x86/uv' and 'x86/xen' into x86/core 2008-12-23 16:27:23 +01:00
Ingo Molnar bf8bd66d05 Merge branch 'x86/apic' into x86/irq
Conflicts:
	arch/x86/kernel/apic.c
2008-12-23 16:24:15 +01:00
Ingo Molnar 1ccedb7cdb Merge commit 'v2.6.28-rc9' into x86/apic 2008-12-23 16:23:23 +01:00
Dale Farnsworth f8f50b1bdd powerpc/32: Wire up the trampoline code for kdump
Wire up the trampoline code for ppc32 to relay exceptions from the
vectors at address 0 to vectors at address 32MB, and modify Kconfig
to enable Kdump support for all classic powerpcs.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23 15:13:29 +11:00
Dale Farnsworth ccdcef72c2 powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M
Add the ability for a classic ppc kernel to be loaded at an address
of 32MB.  This done by fixing a few places that assume we are loaded
at address 0, and by changing several uses of KERNELBASE to use
PAGE_OFFSET, instead.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23 15:13:29 +11:00
Anton Vorontsov 01695a9687 powerpc/32: Allow __ioremap on RAM addresses for kdump kernel
While for debugging it is good to catch bogus users of ioremap, though
for kdump support it is more convenient to use __ioremap for
copy_oldmem_page() (exactly as we do for PPC64 currently).

Note that copy_oldmem_page() calls __ioremap with flags set to '0',
so it should be safe with the regard to the caches.

The other option is to use kmap_atomic_pfn()[1], but it will not work
for kernels compiled without HIGHMEM.

That is, on a board with 256MB RAM and crashkernel=64M@32M case, the
!HIGHMEM capturing kernel maps 0-96M range, which does not include all
the memory needed to capture the dump. And, obviously, accessing
anything upper than 96M will cause faults.

[1] http://ozlabs.org/pipermail/linuxppc-dev/2007-November/046747.html

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23 15:13:29 +11:00
Dale Farnsworth 6f29c3298b powerpc/32: Setup OF properties for kdump
Refactor the setting of kdump OF properties, moving the common code
from machine_kexec_64.c to machine_kexec.c where it can be used on
both ppc64 and ppc32.  This will be needed for kdump to work on ppc32
platforms.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23 15:13:29 +11:00
Anton Vorontsov 7375331388 powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs()
This replaces the dummy crash_setup_regs function with full-fledged
crash_setup_regs implementation.  On PPC32 we simply use the new
ppc_save_regs function to dump the registers.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23 15:13:28 +11:00
Anton Vorontsov 322b439455 powerpc: Prepare xmon_save_regs for use with kdump
Today the arch/powerpc/xmon/setjmp.S file contains only the
xmon_save_regs function.  We want to use it for kdump purposes, so
let's move the file into arch/powerpc/kernel/ and give the function a
more generic name (ppc_save_regs).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23 15:13:28 +11:00
Anton Vorontsov 5be8554875 powerpc: Remove default kexec/crash_kernel ops assignments
Default ops are implicit now.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23 15:13:28 +11:00
Anton Vorontsov 77733f8a33 powerpc: Make default kexec/crash_kernel ops implicit
This removes the need for each platform to specify default kexec and
crash kernel ops, thus effectively adds a working kexec support for
most 6xx/7xx/7xxx-based boards.

Platforms that can't cope with default ops will explode in some weird
way (a hang or reboot is most likely), which means that the board's
kexec support should be fixed or blacklisted via dummy _prepare
callback returning -ENOSYS.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23 15:13:28 +11:00
Dale Farnsworth 2e8e4f5b80 powerpc: Setup OF properties for ppc32 kexec
Refactor the setting of kexec OF properties, moving the common code
from machine_kexec_64.c to machine_kexec.c where it can be used on
both ppc64 and ppc32.  This is needed for kexec to work on ppc32
platforms.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23 15:13:28 +11:00
Sebastien Dugue b906cfa397 powerpc/pseries: Fix cpu hotplug
Currently, pseries_cpu_die() calls msleep() while polling RTAS for
the status of the dying cpu.

However, if the cpu that is going down also happens to be the one
doing the tick then we're hosed as the tick_do_timer_cpu 'baton' is
only passed later on in tick_shutdown() when _cpu_down() does the
CPU_DEAD notification.  Therefore jiffies won't be updated anymore.

This replaces that msleep() with a cpu_relax() to make sure we're not
going to schedule at that point.

With this patch my test box survives a 100k iterations hotplug stress
test on _all_ cpus, whereas without it, it quickly dies after ~50
iterations.

Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net>
Cc: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23 15:13:27 +11:00
Paul Mackerras fad7b9b51e powerpc: Fix KVM build on ppc440
Commit 2a4aca1144 ("powerpc/mm: Split
low level tlb invalidate for nohash processors") changed a call to
_tlbia to _tlbil_all but didn't include the header that defines
_tlbil_all, leading to a build failure on 440 if KVM is enabled.
This fixes it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23 14:58:30 +11:00
H. Peter Anvin adf77bac05 x86: prioritize the FPU traps for the error code
In the case of multiple FPU errors, prioritize the error codes,
instead of returning __SI_FAULT, which ends up pushing a 0 as the
error code to userspace, a POSIX violation.

For i386, we will simply return if there are no errors at all; for
x86-64 this is probably a "can't happen" (and the code should be
unified), but for this patch, return __SI_FAULT|SI_KERNEL if this ever
happens.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-12-22 18:00:18 -08:00
Benjamin Krill def434c231 powerpc/cell: add QPACE as a separate Cell platform
Since the QPACE (Chromodynamics Parallel Computing on the
Cell Broadband Engine) platform doesn't use a iommu, doesn't
have PCI devices and a MPIC much lesser setup and
configurations are needed. So far all devices are detected
as OF device. A notifier function is used to set the dma_ops
for the of_platform bus. Further this patch splits the
PPC_CELL_NATIVE into PPC_CELL_COMMON which are parts that are
shared with the QPACE platform and the rest.

Signed-off-by: Benjamin Krill <ben@codiert.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2008-12-22 22:19:19 +01:00
Arnd Bergmann e68558ddcd powerpc/cell: fix build breakage with CONFIG_SPUFS disabled
CBE_THERM and OPROFILE_CELL both cannot be built without
SPU_FS disabled, so make the dependency explicit.

Reported-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2008-12-22 22:08:26 +01:00
Paul Mundt 59de580af1 sh: oprofile: Fix up the module build.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 19:32:27 +09:00
Takanari Hayama 7d91fcfcb9 sh: add UIO support for JPU on SH7722.
Add JPU support on Migo-R via UIO. This make use of Magnus's
generic UIO platform driver. Chunk of contiguous memory to hold
intermediate image and compressed data during encode and decode.

Signed-off-by: Takanari Hayama <taki@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:49 +09:00
Paul Mundt 6f5cd2bd59 sh: mach-rsk: Use uImage generation by default for rsk7201/7203.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:49 +09:00
Paul Mundt 2ea40dec26 sh: mach-sh03: Fix up pata_platform build breakage.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:49 +09:00
Magnus Damm b5868e8cde sh: enable deferred io LCDC on Migo-R
Enable LCDC deferred io on Migo-R using 1s delay.

As with other deferred io frame buffers user space code should
use fsync() on the frame buffer device to trigger an update.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:49 +09:00
Magnus Damm 0790555437 sh: add LCDC interrupt configuration to AP325 and Migo-R
Add LCDC interrupt resources for AP325 and Migo-R. The LCDC driver does
not require interrupts at this point, but changes such as one-shot SYS
mode using deferred io, and wait-for-vblank will both need this.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:48 +09:00
Magnus Damm da9fdc8b44 sh: split coherent pages
Split pages returned by dma_alloc_coherent() and make sure
we free them one by one.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:48 +09:00
Paul Mundt 78fb40263f sh: dma: Kill off ISA DMA wrapper.
There are no more users for this code, and it has been deprecated for
some time, so just kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:47 +09:00
Paul Mundt 5d2685d0b3 sh: Conditionalize the code dumper on CONFIG_DUMP_CODE.
We don't really want this enabled by default, but it is still quite
useful for debugging. So, make it conditional and leave it off by
default.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:47 +09:00
Paul Mundt fe58cac35f sh: Kill off the unused SH_ALPHANUMERIC debug option.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:47 +09:00
Paul Mundt 740a3e677b sh: Enable skipping of bss on debug platforms for sh32 also.
This enables the same functionality that sh64 has for sh32. When running
on simulated hardware or via remote memory via the debug interface,
memory is gauranteed to be zero on boot already, and skipping the zeroing
of BSS has measurable boot time benefits.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:47 +09:00
Paul Mundt 8a655053ca doc: Update sh cpufreq documentation.
The sh cpufreq driver is no longer limited to just the SH-3 and SH-4,
update the documentation to reflect this fact accordingly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:47 +09:00
Paul Mundt 0146d78759 sh: mrshpc_setup_windows() needs to be inline.
While no one should be including this file multiple times, flag it
inline anyways just in case.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:46 +09:00
Paul Mundt 073da9c0de sh: Kill off cf-enabler with extreme prejudice.
Now that the rest of the boards that were using cf-enabler "generically"
have switched to setting up their mappings on their own, only the mach-se
boards were left using it. All of the cf-enabler using mach-se boards
use a special initialization of the MRSHPC windows rather than going
through the special PTE as other SH-4 platforms do. This consolidates
the MRSHPC setup logic, hooks it up on the boards that care, and gets rid
of any and all remaining references to cf-enabler.

This has been long overdue, as cf-enabler has been the bane of
arch/sh/kernel for the last 7 years. Good riddance.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:46 +09:00
Paul Mundt 8c197c3afb sh: Add a simple edosk7705_defconfig for build testing.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:46 +09:00
Paul Mundt 866ef8f48f sh: mach-edosk7705: Fix up edosk7705 so it all builds again.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:45 +09:00
Paul Mundt 0ef0e6ca42 sh: mach-microdev: Split out the fdc37c93xapm initialization code.
This makes the microdev code a bit more readable, and moves the
setup for the SuperIO out on its own.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:45 +09:00
Paul Mundt 43eeb0fb9f sh: mach-sh03: Use __set_io_port_base(), kill off special ioport_map().
This also fixes up a long-standing bug for this platform where the PIO
base was set to a register offset, rather than the actual PIO offset
itself.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:45 +09:00
Paul Mundt 8db806ec80 sh: mach-sh03: Move off of cf_enabler to pata_platform, as per landisk.
This gets rid of the cf enabler use on mach-sh03 and switches to use
pata_platform with the proper address directly. cf_enabler is
subsequently disabled for mach-sh03.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:45 +09:00
Paul Mundt 98a955da85 sh: board-shmin: Convert shmin to use __set_io_port_base().
Drop the special mv_ioport_map() implementation, as this can simply use
__set_io_port_base() directly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:45 +09:00
Paul Mundt 2125a46083 sh: Kill off dead mv_init_pci() from machvec.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:45 +09:00
Paul Mundt 43f8f9b95b sh: Simplify kernel_thread_helper() for sh32.
This can use the same implementation as sh64, the generated assembly is
the same between the new and old version, so there is not much point in
leaving it open coded in inline assembly.

This is preparatory work for future consolidation of the _32/_64
variants.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:44 +09:00
Paul Mundt 7b80fb32b3 sh: Kill off mv_heartbeat() from the machvec.
Nothing is using this any more, so get rid of it before anyone gets the
bright idea to start using it again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:44 +09:00
Paul Mundt b94ea27570 sh: Kill off the cayman and microdev special heartbeat code.
These can use the generic code instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:44 +09:00
Paul Mundt ca0c14e447 sh: Kill off sh_bios_in_gdb_mode().
With the reworked kgdb support, we always detach and reinitialize the
stub. This was mostly a feature for handoffs between sh-ipl+g and the
kgdb stub, but virtually no sh-ipl+g versions ever had this working
right in the first place.

Given that the sh-ipl+g stubs in general use today don't even support
the GDB stub, and we have already killed off the special casing in the
sh-sci serial driver, kill off this now unused symbol too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:44 +09:00
Paul Mundt a9df1ed92f sh: export sh_bios_get_node_addr() symbol for stnic module.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:44 +09:00
Paul Mundt 8e32018b04 sh: Run sh_bios through a long overdue Lindent.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:44 +09:00
Paul Mundt d9341b51f2 sh: oprofile: Convert op_model_sh7750 to new common interface.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:43 +09:00
Dave Peverley 40a8b421b6 sh: oprofile: Backtrace support.
This patch improves the oprofile support on sh and adds backtrace
support.

Signed-off-by: Dave Peverley <dpeverley@mpc-data.co.uk>
Signed-off-by: Chris Smith <chris.smith@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:43 +09:00
Paul Mundt 60a51fbe5d sh: oprofile: Refactor common setup code for multiple driver support.
This re-implements the old op_model_null code in to something more
generic, where multiple drivers, backtrace, etc. can all be interfaced.
Based largely on arch/mips/oprofile/common.c.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:43 +09:00
Matt Fleming 70fe224743 sh: Enable GENERIC_HARDIRQS_NO__DO_IRQ for all SuperH machines
After the recent changes to switch SuperH board support over to irq_chip
it is now possible to set GENERIC_HARDIRQS_NO__DO_IRQ for all SuperH
boards.

Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:42 +09:00
Matt Fleming 1a94757fae sh: Convert Cayman boards from hw_interrupt_type to irq_chip
I've been unable to even compile-test this change because I don't have
an sh5 toolchain. All uses of hw_interrupt_type for SuperH boards have
now been converted to use irq_chip.

Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:06 +09:00
Matt Fleming e85a47744b sh: Convert Dreamcast support from hw_interrupt_type to irq_chip
Switch the dreamcast IRQ code over to the irq_chip way of doing things,
so that we can set GENERIC_HARDIRQS_NO__DO_IRQ for all SuperH boards.

Also, whilst I'm here change some things to make checkpatch.pl happy:
	- Indent with tabs, not with spaces
	- Include <linux/io.h>, not <asm/io.h>
	- Fix the multi-line comment style
	- Fix some typos in the comments

Tested-by: Adrian McMenamin <adrian@newgolddream.dyndns.info>
Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:06 +09:00
Matt Fleming bd0a22d21f sh: Convert SystemH board support from hw_interrupt_type to irq_chip
... as part of the hw_interrupt_type to irq_chip crusade.

Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:05 +09:00
Matt Fleming be729fd890 sh: Convert Microdev boards from hw_interrupt_type to irq_chip
This is part of the SH move to irq_chip.

Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:05 +09:00
Paul Mundt 180ae2037f sh: Provide sdivsi3/udivsi3/udivdi3 for sh64, kill off libgcc linking.
This moves in the necessary libgcc bits and kills off the libgcc linking
for sh64 kernels as well.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:05 +09:00
Paul Mundt 4466b20cfc sh: Add SH-5 optimized memcpy()/memset()/strcpy()/strlen().
Adopted from the uClibc optimized string versions.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:05 +09:00
Paul Mundt 776d6c298a sh: Kill off remaining CONFIG_SH_KGDB bits.
Now that we use the generic stub, kill off all of the left over
references.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:05 +09:00
Paul Mundt ab6e570ba3 sh: Generic kgdb stub support.
This migrates from the old bitrotted kgdb stub implementation and moves
to the generic stub. In the process support for SH-2/SH-2A is also added,
which the old stub never provided.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:04 +09:00
Paul Mundt d7b01f78a3 sh: Enable HAVE_ARCH_TRACEHOOK for all SH, now that SH-5 supports it too.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:04 +09:00
Paul Mundt dd76279b47 sh: Provide linux/regset.h interface for SH-5.
Plugs in general and FPU regsets.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:04 +09:00
Paul Mundt 94e2fb3d3e sh: Provide asm/syscall.h for SH-5.
This provides the asm/syscall.h implementation for sh64 parts.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:04 +09:00
Paul Mundt 6ac034375f sh: Handle cases where setup{_rt,}_frame() fail on SH-5 signal delivery.
Presently these cases are not handled properly due to the return value
not being passed back. This needs to be correct to get proper behaviour
out of things like the tracehook signal notifier, amongst others.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:04 +09:00
Paul Mundt f15b2dc02f sh: Fix up syscall_get_nr() comment in syscall_32.h.
Residual copy-and-paste damage, fix it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:04 +09:00
Paul Mundt 35724a0aed sh: Fix up the cpu_asid() return value on nommu.
This ought to be unsigned long, rather than defaulting to int.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:03 +09:00
Paul Mundt a99d6fde69 sh: Convert sh64 /proc/asids to debugfs and generic sh.
This converts the sh64 /proc/asids entry to debugfs and enables it for
all SH parts that have debugfs enabled.

On MMU systems this can be used to determine which processes are using
which ASIDs which in turn can be used for finer grained cache tag
analysis.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:03 +09:00
Paul Mundt 4d1f3bbec4 sh: Kill off sh64's unused alloc/free_task_struct() definitions.
These were left over from some time ago, sh64 never got around to
defining __HAVE_ARCH_TASK_STRUCT_ALLOCATOR during the conversion, and it
has no need to. Kill these off and use the generic versions instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:03 +09:00
Paul Mundt 4eec8834f0 sh: mach-migor: Kill off unused Migo-R machvec.
This kills off the special Migo-R machvec, as nothing is using it. By
default this will switch to using the generic machvec, which provides the
same functionality. This saves us a bit of space in the machvec section.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:03 +09:00
Magnus Damm 4545bfa00a sh: add ov772x reset delay on Migo-R
Add reset delay for the ov772x device on Migo-R.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:03 +09:00
Paul Mundt a6bc25abc8 sh: Drop the special qemu defconfig.
QEMU can now use rts7751r2dplus_defconfig directly, there is no more need
for a neutered defconfig.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:03 +09:00
Aoi Shinkai bd40e81323 sh: Delete unnecessary mov in the interrupt exception entry point.
The INTEVT read at interrupt exception entry is uneccessary, as the read
is deferred until we are ready to enter do_IRQ(). The kgdb nmi path still
requires it, so move it there.

Signed-off-by: Aoi Shinkai <shinkoi2005@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:02 +09:00
Paul Mundt 06be372454 sh: Fix an off-by-1 check in __mutex_fastpath_unlock().
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:02 +09:00
Paul Mundt a47925ffd1 sh: Update rsk701_defconfig to reflect mach-rsk changes.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:02 +09:00
Paul Mundt ff15b90506 sh: Enable leds-gpio in rsk7203 defconfig.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:02 +09:00
Paul Mundt ea0aac1e13 sh: Consolidate rsk7203/7201 in to a new mach-rsk.
RSK+ platforms have quite a few characteristics in common, so roll them
together in to a shiny new RSK mach-type.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:02 +09:00
Paul Mundt b5cfeac990 sh: Provide ftrace_make_call()/ftrace_make_nop().
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:02 +09:00