Replace the ->check_acl method with a ->get_acl method that simply reads an
ACL from disk after having a cache miss. This means we can replace the ACL
checking boilerplate code with a single implementation in namei.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2. For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Let filesystems handle waiting for direct I/O requests themselves instead
of doing it beforehand. This means filesystem-specific locks to prevent
new dio referenes from appearing can be held. This is important to allow
generalizing i_dio_count to non-DIO_LOCKING filesystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Resizing the file system can result in an in-memory inode being remapped
to a different aggregate group (AG). A cached AG number can cause
problems when trying to free or allocate inodes. Instead, save the IAG's
agstart address and calculate the agno when we need it.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Replace inode_setattr with opencoded variants of it in all callers. This
moves the remaining call to vmtruncate into the filesystem methods where it
can be replaced with the proper truncate sequence.
In a few cases it was obvious that we would never end up calling vmtruncate
so it was left out in the opencoded variant:
spufs: explicitly checks for ATTR_SIZE earlier
btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier
ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above
In addition to that ncpfs called inode_setattr with handcrafted iattrs,
which allowed to trim down the opencoded variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Quota must being initialized if size or uid/git changes requested.
But initialization performed in two different places:
in case of i_size file system is responsible for dquot init
, but in case of uid/gid init will be called internally in
dquot_transfer().
This ambiguity makes code harder to understand.
Let's move this logic to one common helper function.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently various places in the VFS call vfs_dq_init directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the initialization. For most metadata operations
this is a straight forward move into the methods, but for truncate and
open it's a bit more complicated.
For truncate we currently only call vfs_dq_init for the sys_truncate case
because open already takes care of it for ftruncate and open(O_TRUNC) - the
new code causes an additional vfs_dq_init for those which is harmless.
For open the initialization is moved from do_filp_open into the open method,
which means it happens slightly earlier now, and only for regular files.
The latter is fine because we don't need to initialize it for operations
on special files, and we already do it as part of the namespace operations
for directories.
Add a dquot_file_open helper that filesystems that support generic quotas
can use to fill in ->open.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the transfer dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_transfer helper to __dquot_transfer
and vfs_dq_transfer to dquot_transfer to have a consistent namespace,
and make the new dquot_transfer return a normal negative errno value
which all callers expect.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently notify_change calls vfs_dq_transfer directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the transfer. Most filesystems already
do this, only ufs and udf need the code added, and for jfs it needs to
be enabled unconditionally instead of only when ACLs are enabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
This avoids an indirect call in the VFS for each path component lookup.
Well, at least as long as you own the directory in question, and the ACL
check is unnecessary.
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ioctls were already compatible except for the actual values so this
was fairly easy to do.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Convert jfs_ioctl over to not use the BKL. The only potential race
I could see was with two ioctls in parallel changing the flags
and losing the updates. Use the i_mutex to protect against this.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
They can use generic_file_splice_read() instead. Since sys_sendfile() now
prefers that, there should be no change in behaviour.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Many struct inode_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This allows the splice() and tee() syscalls to be used with JFS.
Signed-off-by: Daniel Drake <ddrake@brontes3d.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Removed trailing spaces & tabs, and spaces preceding tabs.
Also a couple very minor comment cleanups.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
(cherry picked from f74156539964d7b3d5164fdf8848e6a682f75b97 commit)
This patch cleans up generic_file_*_read/write() interfaces. Christoph
Hellwig gave me the idea for this clean ups.
In a nutshell, all filesystems should set .aio_read/.aio_write methods and use
do_sync_read/ do_sync_write() as their .read/.write methods. This allows us
to cleanup all variants of generic_file_* routines.
Final available interfaces:
generic_file_aio_read() - read handler
generic_file_aio_write() - write handler
generic_file_aio_write_nolock() - no lock write handler
__generic_file_aio_write_nolock() - internal worker routine
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch removes readv() and writev() methods and replaces them with
aio_read()/aio_write() methods.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is a conversion to make the various file_operations structs in fs/
const. Basically a regexp job, with a few manual fixups
The goal is both to increase correctness (harder to accidentally write to
shared datastructures) and reducing the false sharing of cachelines with
things that get dirty in .data (while .rodata is nicely read only and thus
cache clean)
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ext2 inode attributes with relevance for jfs:
'a' EXT2_APPEND_FL -> append only
'i' EXT2_IMMUTABLE_FL -> immutable file
's' EXT2_SECRM_FL -> zero file
'u' EXT2_UNRM_FL -> allow for unrm
'A' EXT2_NOATIME_FL -> no access time
'D' EXT2_DIRSYNC_FL -> dirsync
'S' EXT2_SYNC_FL -> sync
overview of jfs flags (partially for OS/2)
value (OS/2) Linux ext2 attrs
------------------------------------------------
0x00010000 IFJOURNAL -
0x00020000 ISPARSE used
0x00040000 INLINEEA used
0x00080000 - - JFS_NOATIME_FL
0x00100000 - - JFS_DIRSYNC_FL
0x00200000 - - JFS_SYNC_FL
0x00400000 - - JFS_SECRM_FL
0x00800000 ISWAPFILE - JFS_UNRM_FL
0x01000000 - - JFS_APPEND_FL
0x02000000 IREADONLY - JFS_IMMUTABLE_FL
0x04000000 IHIDDEN - -
0x08000000 ISYSTEM - -
0x10000000 - -
0x20000000 IDIRECTORY used
0x40000000 IARCHIVE -
0x80000000 INEWNAME -
the implementation is straight forward, except
for the fact that the attributes have to be mapped
to match with the ext2 ones to avoid a separate
tool for manipulating them (this could be avoided
when using a separate flag field in the on-disk
representation, but the overhead is minimal)
a special jfs_ioctl is added to allow for the new
JFS_IOC_GETFLAGS and JFS_IOC_SETFLAGS calls.
a helper function jfs_set_inode_flags() to transfer
the flags from the on-disk version to the inode
minor changes to allow flag inheritance on inode
creation, as well as a cleanup of the on-disk
flags (including the new ones)
beforementioned helper to map between ext2 and jfs
versions of the new flags ...
the JFS_SECRM_FL and JFS_UNRM_FL are not done yet
and I'm not 100% sure they are worth the effort,
the rest seems to work out of the box ...
Signed-off-by: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Marco Stornelli