Commit Graph

229 Commits

Author SHA1 Message Date
Clemens Ladisch 20cde9e8f8 [ALSA] sb8: fix SB 1.0 capture DMA programming
Fix a wrong version check that would cause an invalid command to be sent
to SB 1.0 chips.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-02-29 11:28:15 +01:00
Randy Dunlap 9478bc3bed [ALSA] fix opti9xx/miro section mismatch
snd_opti93x_mixer() is only called by __devinit snd_opti93x_probe(),
so the former can also be __devinit.
snd_miro_mixer() is only called by __devinit snd_miro_probe(),
so the former can also be __devinit.
sound/isa/opti9xx/opti92x-ad1848.c:
WARNING: vmlinux.o(.text+0xf91cd7): Section mismatch: reference to .init.data:snd_opti93x_controls (between 'snd_opti93x_mixer' and 'snd_card_opti9xx_free')
WARNING: vmlinux.o(.text+0xf91d66): Section mismatch: reference to .init.data:snd_miro_controls (between 'snd_opti93x_mixer' and 'snd_card_opti9xx_free')
opti9xx/miro.c:
WARNING: vmlinux.o(.text+0xf926c2): Section mismatch: reference to .init.data:snd_miro_controls (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport')
WARNING: vmlinux.o(.text+0xf926e5): Section mismatch: reference to .init.data:snd_miro_eq_controls (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport')
WARNING: vmlinux.o(.text+0xf926f9): Section mismatch: reference to .init.data:snd_miro_line_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport')
WARNING: vmlinux.o(.text+0xf92716): Section mismatch: reference to .init.data:snd_miro_amp_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport')
WARNING: vmlinux.o(.text+0xf9273e): Section mismatch: reference to .init.data:snd_miro_preamp_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport')
WARNING: vmlinux.o(.text+0xf92764): Section mismatch: reference to .init.data:snd_miro_capture_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport')
WARNING: vmlinux.o(.text+0xf92783): Section mismatch: reference to .init.data:snd_miro_radio_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport')
WARNING: vmlinux.o(.text+0xf9279a): Section mismatch: reference to .init.data:snd_miro_eq_controls (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport')
WARNING: vmlinux.o(.text+0xf927b9): Section mismatch: reference to .init.data:snd_miro_radio_control (between 'snd_miro_mixer' and 'snd_legacy_find_free_ioport')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:12 +01:00
Krzysztof Helt 39516103e6 [ALSA] cs4231: remove one busy wait
This busy_wait is not needed after latest changes
to the cs4231-lib

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:58 +01:00
Takashi Iwai 9004acc70e [ALSA] Remove sound/driver.h
This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:48 +01:00
Krzysztof Helt 1bc9eed379 [ALSA] es18xx: Enable wavetable input from ESS chips
This patch enables wavetable chips ES689/ES69X connected to
ESS ES18xx chips. The wavetable chip uses FM DAC if the clock signal
from the wavetable is active.
It has no effect if there is no ESS wavetable chip present.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:45 +01:00
Joe Perches 561de31a23 [ALSA] sound/: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:41 +01:00
Takashi Iwai cd0b4ac839 [ALSA] sb16 - Suppress compile warning
sound/isa/sb/sb16_csp.c: In function ‘snd_sb_csp_new’:
sound/isa/sb/sb16_csp.c:121: warning: ‘version’ may be used uninitialized in this function

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:34 +01:00
Rene Herman 109c53f840 [ALSA] sound/isa: kill pnp_resource_change
This removes the pnp_resource_change use from the ALSA ISAPnP drivers. In
2.4 these were useful in providing an easy path to setting the resources,
but in 2.6 they retain function as a layering violation only.
This makes for a nice cleanup (-550 lines) of ALSA but moreover, ALSA is the
only remaining user of pnp_init_resource_table(), pnp_resource_change() and
pnp_manual_config_dev() (and, in fact, of 'struct pnp_resource_table') in
the tree outide of drivers/pnp itself meaning it makes for more cleanup
potential inside the PnP layer.
Thomas Renninger acked their removal from that side, you did from the ALSA
side (CC list just copied from that thread).
Against current alsa-kernel HG. Many more potential cleanups in there, but
this _only_ removes the pnp_resource_change code. Compile tested against
current alsa-kernel HG and compile- and use-tested against 2.6.23.x (few
offsets).
Cc: Thomas Renninger <trenn@suse.de>

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:30 +01:00
Joe Perches 4f1895b0b5 [ALSA] sound/isa: Add missing 'space'
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:29 +01:00
Takashi Iwai 3b89246778 [ALSA] Check value range in ctl callbacks
Check the value ranges in ctl put callbacks properly (in the rest drivers).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:25 +01:00
Takashi Iwai e5723b41ab [ALSA] Remove sequencer instrument layer
Remove sequencer instrument layer from the tree.
This mechanism hasn't been used much with the actual devices.  The only
reasonable user was OPL3 loader, and now it was rewritten to use hwdep
instead.  So, let's remove the rest of rotten codes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:13 +01:00
Takashi Iwai 27ed7ceda5 [ALSA] ad1848 - Fix print format
Fixed the print format for debug message.
Spotted by Matthew Wilcox.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:10 +01:00
Robert P. J. Day 3a4fa0a25d Fix misspellings of "system", "controller", "interrupt" and "necessary".
Fix the various misspellings of "system", controller", "interrupt" and
"[un]necessary".

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:10:43 +02:00
Takashi Iwai b875d65052 [ALSA] Fix thinko in cs4231 mce down check
The last patches to replace with schedule_timeout() don't work as expected.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:52:12 +02:00
Krzysztof Helt f81b953d43 [ALSA] This patch adds support for a wavetable chip on
the BTC 1817DW board.
The QS1000 is connected through the digital input
to the Opti931 chip.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 16:51:28 +02:00
Krzysztof Helt ca2df45a07 [ALSA] This patch removes open_mutex from the ad1848-lib as
open and close operations are called only from pcm layer
and mutexed there with pcm->open_mutex.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 16:51:26 +02:00
Ingo Molnar c2cbdbb158 [ALSA] fix bootup crash in snd_gus_interrupt()
when simulating a storm of fake GUS interrupts (without actually owning
this venerable piece of ISA hardware) the driver falls over (crashes) in
two ways:
1) spinlocks being initialized too late:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
 [<401058ca>] show_trace_log_lvl+0x1a/0x30
 [<401064b2>] show_trace+0x12/0x20
 [<401064d6>] dump_stack+0x16/0x20
 [<4014a72b>] __lock_acquire+0xcfb/0x1030
 [<4014aac0>] lock_acquire+0x60/0x80
 [<40721a68>] _spin_lock_irqsave+0x38/0x50
 [<4058fc12>] snd_gf1_i_look8+0x22/0x60
 [<405906fe>] snd_gus_interrupt+0x13e/0x270
 [<401548e8>] handle_IRQ_event+0x28/0x60
 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0
 [<40107238>] do_IRQ+0x48/0xa0
 [<401051fe>] common_interrupt+0x2e/0x40
 [<40156822>] register_handler_proc+0x92/0xf0
 [<401550c2>] setup_irq+0xe2/0x190
 [<40155224>] request_irq+0xb4/0xd0
 [<4058f524>] snd_gus_create+0x124/0x3c0
 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0
 [<403f5eff>] isa_bus_probe+0x1f/0x30
 [<403f1944>] driver_probe_device+0x84/0x190
 [<403f1a58>] __device_attach+0x8/0x10
 [<403f0e63>] bus_for_each_drv+0x53/0x80
 [<403f1b1b>] device_attach+0x8b/0x90
 [<403f0dd8>] bus_attach_device+0x48/0x80
 [<403efdbd>] device_add+0x45d/0x5a0
 [<403eff12>] device_register+0x12/0x20
 [<403f60c3>] isa_register_driver+0xb3/0x140
 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20
 [<40a665c3>] kernel_init+0x133/0x310
 [<401054a7>] kernel_thread_helper+0x7/0x10
 =======================
2) callback functions not being filled in yet:
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
 printing eip:
00000000
*pde = 00000000
Oops: 0000 [#1]
SMP DEBUG_PAGEALLOC
CPU:    0
EIP:    0060:[<00000000>]    Not tainted VLI
EFLAGS: 00010002   (2.6.23 #37)
EIP is at 0x0
eax: 7fe94000   ebx: 7fe94000   ecx: 00000000   edx: 00000226
esi: 00000000   edi: 00000005   ebp: 7ff87c28   esp: 7ff87bf4
ds: 007b   es: 007b   fs: 00d8  gs: 0000  ss: 0068
Process swapper (pid: 1, ti=7ff86000 task=7ff84000 task.ti=7ff86000)
Stack: 40590683 408424a9 408db87c 00000029 40787406 00000064 00000046 ff000000
       000000ff 00000001 7faefaf0 00000000 00000005 7ff87c40 401548e8 00000000
       40a52000 7faefaf0 00000005 7ff87c58 40155cc1 40a52030 00000005 00000000
Call Trace:
 [<401058ca>] show_trace_log_lvl+0x1a/0x30
 [<4010598b>] show_stack_log_lvl+0xab/0xd0
 [<40105b7c>] show_registers+0x1cc/0x2d0
 [<40105d96>] die+0x116/0x240
 [<4011d7bb>] do_page_fault+0x18b/0x670
 [<40721d22>] error_code+0x72/0x80
 [<401548e8>] handle_IRQ_event+0x28/0x60
 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0
 [<40107238>] do_IRQ+0x48/0xa0
 [<401051fe>] common_interrupt+0x2e/0x40
 [<401a344e>] proc_create+0x3e/0x120
 [<401a3733>] proc_mkdir_mode+0x23/0x50
 [<401a376f>] proc_mkdir+0xf/0x20
 [<40156864>] register_handler_proc+0xd4/0xf0
 [<401550c2>] setup_irq+0xe2/0x190
 [<40155224>] request_irq+0xb4/0xd0
 [<4058f524>] snd_gus_create+0x124/0x3c0
 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0
 [<403f5eff>] isa_bus_probe+0x1f/0x30
 [<403f1944>] driver_probe_device+0x84/0x190
 [<403f1a58>] __device_attach+0x8/0x10
 [<403f0e63>] bus_for_each_drv+0x53/0x80
 [<403f1b1b>] device_attach+0x8b/0x90
 [<403f0dd8>] bus_attach_device+0x48/0x80
 [<403efdbd>] device_add+0x45d/0x5a0
 [<403eff12>] device_register+0x12/0x20
 [<403f60c3>] isa_register_driver+0xb3/0x140
 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20
 [<40a665c3>] kernel_init+0x133/0x310
 [<401054a7>] kernel_thread_helper+0x7/0x10
 =======================
Code:  Bad EIP value.
EIP: [<00000000>] 0x0 SS:ESP 0068:7ff87bf4
Kernel panic - not syncing: Fatal exception in interrupt
with these things fixed, i get the expected 'no such hardware' result
from the driver initialization:
 Calling initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20()
 ALSA sound/isa/gus/gusclassic.c:136: [0x220] check 1 failed - 0xff
 initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() returned 0.
 initcall 0x40aa3dc0 ran for 133 msecs:
 alsa_card_gusclassic_init+0x0/0x20()

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 16:51:26 +02:00
Jaroslav Kysela c1017a4cdb [ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.cz
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 16:51:18 +02:00
Trent Piepho fe1b5e874d [ALSA] ad1848: simplify MCE down code
The polling loop to check for ACI to go down was more convoluted than it
needed to be.  New loop should be more efficient and it is a lot simpler.  The
old loop checked for a timeout before checking for ACI down, which could
result in an erroneous timeout.  It's only a failure if the timeout expires
_and_ ACI is still high.  There is nothing wrong with the timeout expiring
while the task is sleeping if ACI went low.
A polling loop to check for the device to leaving INIT mode is removed.  The
device must have already left init for the previous ACI loop to have finished.
Acked-by: Rene Herman <rene.herman@gmail.com>

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:50:59 +02:00
Trent Piepho b438f817b1 [ALSA] ad1848: Fix msleep while atomic
Simplest fix.
Acked-by: Rene Herman <rene.herman@gmail.com>

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:50:58 +02:00
Rene Herman d86d01935a [ALSA] alsa-kernel: schedule_timeout() fixes
Fix schedule_timeout() use in alsa-kernel. Mostly just
	schedule_timeout(1) --> schedule_timeout_uninterruptible(1)
The wavefront_synth one fixes the surrounding loop as well. In ymfpci_main,
delete a superfluous set_current_state() and in soc/soc-dapm.c replace an
_interruptible with _uninterruptible in some debug code; it's not waiting
for signals.

Signed-off-by: Rene Herman <rene.herman>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:50:54 +02:00
Krzysztof Helt ec1e794932 [ALSA] sscape: support for audio part of VIVO cards
This patch adds support for audio part of the Ensoniq
SoundScape VIVO cards. The MIDI part is not supported.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:50:51 +02:00
Takashi Iwai 1ea73412b2 [ALSA] opti9xx: adjust OPL3 FM resource value
The OPTi ISA-PnP chips advertise their OPL4 base at 0x380 (to 0x3f0) through
pnp and put their on-chip OPL3 at +8. The driver assumes the provided
value is the ALBase (OPL3 address) though and checks for an OPL4 at -8,
which means that simply adding 8 to the pnp provides value works to fix
detection of both OPL3 and OPL4.
Problem spotted on 931 and 933 by Krzysztof Helt and confirmed on 924 and
925 (together all OPTi ISA-PnP chips) by me.
Signed-off-by; Rene Herman <rene.herman@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:50:49 +02:00
Krzysztof Helt 4996bca985 [ALSA] sscape: driver extension to 2nd DMA and WSS port
This patch adds second DMA channel and WSS port settings
to the sscape driver. Also, it adds internal card type setting.
The Ensoniq SoundScape VIVO PnP id is added but not handled
yet.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:50:47 +02:00
Krzysztof Helt 1cf0bc7e73 [ALSA] sc6000: 2 minor fixes
This patch zeroes buffer for the card name and
fixes incorrect jump in the probe function.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:50:45 +02:00
Krzysztof Helt f79415207e [ALSA] ad1848_lib: waiting loops done after cs4231_lib
This patch fixes ad1848_lib waiting loops to be the same as in the cs4231_lib.
Acked-by: Rene Herman <rene.herman@gmail.com>

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:50:40 +02:00
Andrew Morton 3a5bdee5fa [ALSA] sc6000 build fix
sound/isa/sc6000.c: In function 'sc6000_dsp_reset':
sound/isa/sc6000.c:270: error: implicit declaration of function 'udelay'        sound/isa/sc6000.c: In function 'sc6000_init_mss':
sound/isa/sc6000.c:327: error: implicit declaration of function 'msleep'
{standard input}: Assembler messages:

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:50:39 +02:00
Jaroslav Kysela 5683bc6e9e [ALSA] SC6000 driver - add HAS_IOPORT dependency
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:50:24 +02:00
Krzysztof Helt e307258d5b [ALSA] Gallant SC-6000 driver
This is port of the Gallant SC-6000 driver from the OSS aedsp16 driver.
This card was also sold as AudioExcel DSP 16 and Zoltrix AV302 (Audio
Plus True 16).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:50:21 +02:00
Krzysztof Helt 23d4635ed3 [ALSA] cs4231-lib: improved waiting after mce_down
This patch replaces long msleeps in waiting loops
with schedule_timeout() calls.

Signed-off-by: Krzysztof Helt <krzysztof.h1 at wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:49:29 +02:00
Rene Herman d44df2d0f2 [ALSA] ad1848/cs4231: replace commented out debug code with snd-printd{,d}
While I'm at it another 'while I'm there' -- replace commented out debug
code with snd-printd{,d}.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:49:26 +02:00
Rene Herman bc962efa6c [ALSA] ad1848: replace HZ calculus with msecs_to_jiffies()
If I'm not mistaken, any (new) use of HZ these days is considered a bug so
while I'm there...

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:49:25 +02:00
Rene Herman 90cf9b8532 [ALSA] ad1838/cs4231 - fix MCE timeout upon initial load
When the ad1848/cs2431 is first being initialized, auto-calibration may not
be set causing a timeout waiting for it in snd_ad1848/cs4231_mce_down().
This has no dire consequences other than an alarming printk, but since what
we need to wait for is for the calibration to _finish_, let's just check for
that instead.
The early chips need a slight delay (as commented -- 5 sample periods) to be
sure that _if_ calibration is going to happen, it has started when we check
While the CS4231A datasheet implies it'll happen immediately on downing MCE,
some testing is showing that there's a window there as well, so just do the
delay everywhere.
Thanks to Krysztof Helt for pinpointing this problem.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:49:24 +02:00
Krzysztof Helt 6c041b5eae [ALSA] cs4231-lib: replace common delay loop by function
This patch replaces a common delay loop by a function.
It also uses ARRAY_SIZE macro for the rates table.
Acked-by: Rene Herman <rene.herman@gmail.com>

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:49:10 +02:00
Krzysztof Helt 8e6a2c2ec9 [ALSA] ad1848_lib: replace common delay loop by function
This patch replaces a common delay loop by a function.
It also uses ARRAY_SIZE macro for the rates table.
Acked-by: Rene Herman <rene.herman@gmail.com>

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:49:09 +02:00
Takashi Iwai 2d4a485b3d [ALSA] Allow shared IRQ for CS5530 device
CS5530 is a PCI device and often shares the IRQ although the SB common
routine tries to allocate it exclusively.  This patch allows shared IRQ
for CS5530.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:59:32 +02:00
Takashi Iwai c2b1239a9f [ALSA] wavefront - Use standard firmware loader
Use the standard firmware loader for loading ICS2115 OS firmware file.
This is the last old bad guy that is still using sys_open() and sys_read()
calls, and now all should be gone.
The patch also adds the missing description of module options related
with wavefront_synth.c.
Due to this rewrite, user will have to copy or make symlink the firmware
file appropriately to the standard firmware path such as /lib/firmware.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:59:22 +02:00
Clemens Ladisch b83f346bc4 [ALSA] remove incorrect usage of SNDRV_PCM_INFO_SYNC_START and snd_pcm_set_sync()
Set the SNDRV_PCM_INFO_SYNC_START flag and the substream's sync ID
(only) if the substream actually can be linked to another one.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:52 +02:00
Krzysztof Helt ab9914f840 [ALSA] isa libs Makefiles cleanup
This patch uses the Kconfig parameters SND_AD1848_LIB and
SND_CS4231_LIB instead of mentioning each driver that requires
the ad1848-lib or cs4231-lib separately in the Makefiles.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:38 +02:00
Rene Herman 4848ffe520 [ALSA] add the ESS1879 pnpbios ID to the es18xx driver
As reported by Troy Heidner, the 'Gateway Solo 5150' laptop (for one) has an
onboard ESS1879 that identifies itself through PNPBIOS as just that. He also
confirmed that other than not knowing about it, snd-es18xx drives the chip
fine, so this adds the ID to the driver.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:21 +02:00
Paul Vojta e2340465ec [ALSA] Fix bugs in mode change/recalibration for opl3sa2 driver
The mode change / recalibration doesn't work always with opl3sa2 devices,
e.g. the first time it's played back.  The patch fixes the problem.

Signed-off-by: Paul Vojta <vojta@math.berkeley.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:08 +02:00
Takashi Iwai a5ce88909d [ALSA] Clean up with common snd_ctl_boolean_*_info callbacks
Clean up codes using the new common snd_ctl_boolean_*_info() callbacks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:57:45 +02:00
Adrian Bunk 706568967c [ALSA] fix SND_CS5530=y, ISA=n compilation
This patch fixes the following compile error with
CONFIG_SND_CS5530=y, CONFIG_ISA=n:
<--  snip  -->
...
  LD      .tmp_vmlinux1
sound/built-in.o: In function 'snd_sb16_capture_trigger':
sb16_main.c:(.text+0x212ad): undefined reference to 'snd_sbdsp_command'
sb16_main.c:(.text+0x212cc): undefined reference to 'snd_sbdsp_command'
sb16_main.c:(.text+0x212f7): undefined reference to 'snd_sbdsp_command'
sound/built-in.o: In function 'snd_sb16_playback_trigger':
sb16_main.c:(.text+0x2136d): undefined reference to 'snd_sbdsp_command'
sb16_main.c:(.text+0x2138c): undefined reference to 'snd_sbdsp_command'
...
<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20 11:11:49 +02:00
Paul Vojta 4700418cfc [ALSA] opl3sa2 - Add Neomagic MagicWave 3D ISA PnP ID
Add Neomagic MagicWave 3D to list of supported devices for opl3sa2
driver.

Signed-off-by: Paul Vojta <vojta@math.berkeley.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20 11:11:41 +02:00
Takashi Iwai e65365de5b [ALSA] Fix invalid schedule_timeout_interruptible()
Fixed the invalid use of schedule_timeout_interruptible() without
checking pending signals.  Simply replaced with schedule_timeout().
Suggestions thanks to Jeff Garzik.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20 11:11:36 +02:00
Takashi Iwai dda369cf20 [ALSA] Fix SB-module dependency with PCI drivers
A few PCI drivers like ALS4000 and CS5530 require the SB16-codes.
This patch fixes / improves the dependency between SB modules and
PCI drivers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20 11:11:21 +02:00
Takashi Iwai 621887aee9 [ALSA] Add support for Cyrix/NatSemi Geode CS5530 (VSA1)
Add support for Cyrix/NatSemi Geode SC5530 (VSA1).
The driver is snd-cs5530.
Signed-off-by Ash Willis <ashwillis@programmer.net>

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20 11:11:19 +02:00
Takashi Iwai 101f6f4ba7 [ALSA] Fix unfreed pnp driver in opti9xx ISA driver
- Added the missing pnp_unregister_card_driver() in the case ISA PnP
  isn't found, which caused an error at kobject_add with -EEXIST
   Jun 11 09:07:31 rain kernel: kobject_add failed for opti9xx with -EEXIST, don't try to register things with the same name in the same directory.
   Jun 11 09:07:31 rain kernel:  [<c01c18fa>] kobject_shadow_add+0x12a/0x1c0
   Jun 11 09:07:31 rain kernel:  [<c01c1a81>] kobject_register+0x21/0x50
   Jun 11 09:07:31 rain kernel:  [<c01f09a2>] bus_add_driver+0x72/0x1b0
   Jun 11 09:07:31 rain kernel:  [<c01d3dff>] pnp_register_card_driver+0x4f/0xc0
   Jun 11 09:07:31 rain kernel:  [<c89bc00a>] alsa_card_opti9xx_init+0xa/0x25 [snd_opti92x_ad1848]
   Jun 11 09:07:31 rain kernel:  [<c0136947>] sys_init_module+0x157/0x1610
   Jun 11 09:07:31 rain kernel:  [<c01029b4>] syscall_call+0x7/0xb
- Fixed the probe behavior when no PnP is set up.  Now it behaves
  like the former version.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20 11:11:13 +02:00
Randy Dunlap ea7fc3336b ALSA: use __devexit_p
Change __devexit to __devexit_p:
sound/isa/opl3sa2.c:956: error: expected expression before '__attribute__'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28 11:34:54 -07:00
Rene Herman 609d769415 [ALSA] Fix probe of non-PnP ISA devices
isa_register_driver() returns an error if no device is found
and it's no fatal error for the drivers with pnp support.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-16 12:22:44 +02:00