Commit Graph

612 Commits

Author SHA1 Message Date
Mike Frysinger 9c1a125921 ptrace: unify FDPIC implementations
The Blackfin/FRV/SuperH guys all have the same exact FDPIC ptrace code in
their arch handlers (since they were probably copied & pasted).  Since
these ptrace interfaces are an arch independent aspect of the FDPIC code,
unify them in the common ptrace code so new FDPIC ports don't need to copy
and paste this fundamental stuff yet again.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:44 -07:00
Linus Torvalds 064e297c32 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (30 commits)
  Blackfin: SMP: fix continuation lines
  Blackfin: acvilon: fix timeout usage for I2C
  Blackfin: fix typo in BF537 IRQ comment
  Blackfin: unify duplicate MEM_MT48LC32M8A2_75 kconfig options
  Blackfin: set ARCH_KMALLOC_MINALIGN
  Blackfin: use atomic kmalloc in L1 alloc so it too can be atomic
  Blackfin: another year of changes (update copyright in boot log)
  Blackfin: optimize strncpy a bit
  Blackfin: isram: clean up ITEST_COMMAND macro and improve the selftests
  Blackfin: move string functions to normal lib/ assembly
  Blackfin: SIC: cut down on IAR MMR reads a bit
  Blackfin: bf537-minotaur: fix build errors due to header changes
  Blackfin: kgdb: pass up the CC register instead of a 0 stub
  Blackfin: handle HW errors in the new "FAULT" printing code
  Blackfin: show the whole accumulator in the pseudo DBG insn
  Blackfin: support all possible registers in the pseudo instructions
  Blackfin: add support for the DBG (debug output) pseudo insn
  Blackfin: change the BUG opcode to an unused 16-bit opcode
  Blackfin: allow NMI watchdog to be used w/RETN as a scratch reg
  Blackfin: add support for the DBGA (debug assert) pseudo insn
  ...
2010-05-24 08:02:58 -07:00
Mike Frysinger be1577e378 Blackfin: another year of changes (update copyright in boot log)
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:11 -04:00
Robin Getz 479ba60358 Blackfin: move string functions to normal lib/ assembly
Since 'extern inline' doesn't work correctly in the context of the Linux
kernel (too many overriding defines), move the string functions to normal
lib/ assembly files (like the existing mem funcs).  This avoids the forced
inline all over the kernel and allows us to place them constantly in L1.

This also avoids some module failures when gcc inserts calls to string
functions but the kernel build system doesn't fully consult the library
archives.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:09 -04:00
Mike Frysinger d2db97bf6b Blackfin: kgdb: pass up the CC register instead of a 0 stub
While the CC pseudo register can be deduced from the ASTAT register, make
sure we set its value correctly instead of always stubbing it out as 0.
GDB itself looks at this pseudo register instead of ASTAT, so we have to
supply the right value.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:07 -04:00
Robin Getz a80d5f449d Blackfin: handle HW errors in the new "FAULT" printing code
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:07 -04:00
Robin Getz a6d9dbf5e4 Blackfin: show the whole accumulator in the pseudo DBG insn
Rather than print just part of the accumulator register, show the whole
40 bits.  This matches the simulator behavior better.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:06 -04:00
Robin Getz 5a132f7aeb Blackfin: support all possible registers in the pseudo instructions
Rather than decoding just the common R/P registers, handle all of them.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:05 -04:00
Robin Getz dc89d97fc7 Blackfin: add support for the DBG (debug output) pseudo insn
Another pseudo insn used by Blackfin simulators.  Also factor some now
common register lookup code out of the DBGA handlers.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:05 -04:00
Robin Getz 6ce3e9c2a2 Blackfin: add support for the DBGA (debug assert) pseudo insn
A few pseudo debug insns exist to make testing of simulators easier.
Since these don't actually exist in the hardware, we have to have the
exception handler take care of emulating these.  This allows sim test
cases to be executed unmodified under Linux and thus simplify debugging
greatly.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:18:56 -04:00
Robin Getz 9a95e2f100 Blackfin: make hardware trace output a little more useful
Decode the vast majority of insns that appear in the trace buffer to get a
better idea of what's going on at a glance.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:40:19 -04:00
Robin Getz d60805ad47 Blackfin: print out the faulting insn in the trace output
Print out the faulting instruction so when people send traces as part of
bug reports, we have a better idea of what is going on.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:40:19 -04:00
Robin Getz d28cff4b61 Blackfin: remove CONFIG_DEBUG_VERBOSE from trace.c
Now that the split traps code has moved all the verbose output to the
trace.c file, we can unify all the CONFIG_DEBUG_VERBOSE handling.  This
gets rid of much of the crappy ifdef forest and enables usage of normal
pr_xxx functions so checkpatch stops complaining.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:40:18 -04:00
Robin Getz 2a12c4632d Blackfin: split kernel/traps.c
The current kernel/traps.c file has grown a bit unwieldy as more debugging
functionality has been added over time, so split it up into more logical
files.  There should be no functional changes here, just minor whitespace
tweaking.  This should make future extensions easier to manage.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:40:17 -04:00
Michael Hennerich bb84dbf69b Blackfin: punt Blackfin-specific GPIO wakeup API
This patch removes a custom GPIO wakeup API which allowed GPIOs to act
as wakeup sources, which are not configured as Interrupts.
This API is a leftover from the time before irq_wake was established.
From now on people must use enable_irq_wake(GPIO_IRQx) and the GPIO in
question needs to be configured as Interrupt.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:40:16 -04:00
Jason Wessel e8861129d3 kgdb,blackfin: Add in kgdb_arch_set_pc for blackfin
The new debug core api requires all architectures that use to debug
core to implement a function to set the program counter.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-05-20 21:04:20 -05:00
Linus Torvalds 7d02093e29 Merge branch 'timers-for-linus-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  avr32: Fix typo in read_persistent_clock()
  sparc: Convert sparc to use read/update_persistent_clock
  cris: Convert cris to use read/update_persistent_clock
  m68k: Convert m68k to use read/update_persistent_clock
  m32r: Convert m32r to use read/update_peristent_clock
  blackfin: Convert blackfin to use read/update_persistent_clock
  ia64: Convert ia64 to use read/update_persistent_clock
  avr32: Convert avr32 to use read/update_persistent_clock
  h8300: Convert h8300 to use read/update_persistent_clock
  frv: Convert frv to use read/update_persistent_clock
  mn10300: Convert mn10300 to use read/update_persistent_clock
  alpha: Convert alpha to use read/update_persistent_clock
  xtensa: Fix unnecessary setting of xtime
  time: Clean up direct xtime usage in xen
2010-05-19 17:10:06 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
John Stultz cb0e996378 blackfin: Convert blackfin to use read/update_persistent_clock
This patch converts the blackfin architecture to use the generic
read_persistent_clock and update_persistent_clock interfaces, reducing
the amount of arch specific code we have to maintain, and allowing for
further cleanups in the future.

I have not built or tested this patch, so help from arch maintainers
would be appreciated.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <1267675049-12337-10-git-send-email-johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-13 01:14:12 +01:00
Joachim Eastwood f9c29e872b Blackfin: mark gpio lib functions static
Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:52 -05:00
Joachim Eastwood 7f4f69f991 Blackfin: GPIO: implement to_irq handler
This makes it possible to support IRQs coming from off-chip GPIO
controllers.

Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:52 -05:00
Frans Pop 2bc4affe9c Blackfin: remove trailing space in messages
Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Mike Frysinger ddaebcabbc Blackfin: add support for restart_syscall()
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Mike Frysinger 600482c13d Blackfin: fix single stepping over system calls
On Blackfin systems, the hardware single step exception triggers before
the system call exception, so we need to save this info to process it
later on.  Otherwise, single stepping in userspace misses a few insns
right after the system call.

This is based a bit on the SuperH code added in commit 4b505db9c4.

Reported-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Mike Frysinger e8f263dfd3 Blackfin: initial tracehook support
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Mike Frysinger e50e2f25c5 Blackfin: initial regset support
We don't support core dumps (yet?), but this should make things easier.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Mike Frysinger f2ce48024a Blackfin: simplify PTRACE_{PEEK,POKE}USR in preperation for regset support
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Mike Frysinger 5f09c77d2a Blackfin: simplify SYSCFG code a bit and ignore attempts to change it
We don't want to let user space modify the SYSCFG register arbitrarily as
the settings are system wide (SNEN/CNEN) and can cause misbehavior.  The
only other bit here (SSSTEP) has proper controls via PTRACE_SINGLESTEP.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Christoph Hellwig f5b99627a3 Blackfin: use generic ptrace_resume code
Use the generic ptrace_resume code for PTRACE_SYSCALL, PTRACE_CONT,
PTRACE_KILL and PTRACE_SINGLESTEP.  This implies defining
arch_has_single_step in <asm/ptrace.h> and implementing the
user_enable_single_step and user_disable_single_step functions, which
also causes the breakpoint information to be cleared on fork, which
could be considered a bug fix.

Also the TIF_SYSCALL_TRACE thread flag is now cleared on PTRACE_KILL
which it previously wasn't which is consistent with all architectures
using the modern ptrace code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Graf Yang 718340f629 Blackfin: rewrite resync_core_{i,d}cache() SMP logic to avoid per_cpu data
This functions are implicitly called by core functions like cpu_relax(),
and since those functions may be called early on before common code has
initialized the per-cpu data area, we need to tweak the stats gathering.
Now the statistics are maintained in common bss which makes these funcs
safe to use as soon as the C runtime env is setup.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Graf Yang 6c2b7072a7 Blackfin: add support for cpufreq on SMP systems
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Graf Yang 64b33a00dc Blackfin: split watchdog definitions into a dedicated header file
This allows things to be shared between the different watchdog sources.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Mike Frysinger b73faf7449 Blackfin: support new ftrace frame pointer semantics
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Mike Frysinger aebfef0324 Blackfin: implement ftrace mcount test
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Graf Yang 60ffdb3654 Blackfin: implement nmi_watchdog for SMP on BF561
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Barry Song 726e96561e Blackfin: respect the L1 kconfig optimization in the MPU code
Restore support for CONFIG_EXCPT_IRQ_SYSC_L1 in the MPU CPLB manager.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Barry Song 5e8d3210b5 Blackfin: fill out the signal si_addr when sending a SIGBUS/SIGSEGV
Some userspace applications use this member in diagnosing crashes.  It
also makes some LTP tests pass (i.e. the Blackfin arch behaves more like
everyone else).

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Graf Yang c6669c223a Blackfin: fix up mm locking in address dumping
The locking code in the address dumper needs to grab the mm's mmap_sem
so that other CPUs do not get an inconsistent view.  On UP systems this
really wasn't a problem, but it is easy to trigger a race on SMP systems
when another CPU removes a mapping.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Mike Frysinger 8d0177dbcb Blackfin: kgdb: mark all local funcs/structs static
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Roel Kluin 48a74f9d1b Blackfin: fix decoding of opcodes 41-47 in decode_instruction()
This condition allowed only decoding of opcode 0x0040

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Barry Song d86bfb1600 Blackfin: initial XIP support
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Barry Song 8916a1499d Blackfin: fix the section name of init_thread_union
Use the common attribute rather than setting the section name directly.
The common linker script defines expect the newer naming.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Barry Song 6feda3a653 Blackfin: replace harcoded define with proper THREAD_SIZE macro
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Jie Zhang 0afc272cc6 Blackfin: fix relocation errors with large initramfs images
Since we are now discarding .exit.text at runtime instead of link time, we
need to place all .text sections ahead of the .data sections.  Otherwise,
a really large attached initramfs may cause link errors as it pushes the
PC relative relocations behind the limits of the Blackfin ISA (~16meg).
The instructions in the .exit.text are unable to call back into the .text
sections leading to a link failure.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Yi Li 0d152c27e3 Blackfin: SMP: make core timers per-cpu clock events for HRT
SMP systems require per-cpu local clock event devices in order to enable
HRT support.  One a BF561, we can use local core timer for this purpose.
Originally, there was one global core-timer clock event device set up for
core A.

To accomplish this feat, we need to split the gptimer0/core timer logic
so that each is a standalone clock event.  There is no requirement that
we only have one clock event source anyways.  Once we have this, we just
define per-cpu clock event devices for each local core timer.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Michael Hennerich edd0799250 Blackfin: gpio: use shorter name
The gpio label size is 16 char, but the current code uses a longer name
resulting in chopped display.  So use a shorter name.

Reported-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Sonic Zhang a3a6a59019 Blackfin: dma-mapping: fix thinko in constant optimization
Make sure the non-constant version of the dma_sync functions actually
complete instead of recursively calling itself forever.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Sonic Zhang 5792ab2a0a Blackfin: MPU: handle caches for reserved memory
We weren't handling the user-specified cache behavior for the reserved
memory regions (via mem=/max_mem=).  The no-MPU code already takes care
of this, so add support to the MPU code as well.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Barry Song e18e7dd334 Blackfin: fix MPU page permission masks overflow when dealing with async memory
Attempting to use the MPU while doing XIP out of parallel flash hooked up
to the async memory bus would often result in random crashes as the MPU
slowly corrupted memory.

The fallout here is that the async banks gain MPU protection from user
space too.  So any accesses have to go through the mmap() interface rather
than just using hardcoded pointers.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Sonic Zhang b635f1912d Blackfin: allow boards to register early devices
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:45 -05:00