A fuzzer recently triggered lockdep warnings about potential sb_writers
deadlocks caused by fh_want_write().
Looks like we aren't careful to pair each fh_want_write() with an
fh_drop_write().
It's not normally a problem since fh_put() will call fh_drop_write() for
us. And was OK for NFSv3 where we'd do one operation that might call
fh_want_write(), and then put the filehandle.
But an NFSv4 protocol fuzzer can do weird things like call unlink twice
in a compound, and then we get into trouble.
I'm a little worried about this approach of just leaving everything to
fh_put(). But I think there are probably a lot of
fh_want_write()/fh_drop_write() imbalances so for now I think we need it
to be more forgiving.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSv4 read compound processing invokes nfsd_splice_read and
nfs_readv directly, so the trace points currently in nfsd_read are
not invoked for NFSv4 reads.
Move the NFSD READ trace points to common helpers so that NFSv4
reads are captured.
Also, record any local I/O error that occurs, the total count of
bytes that were actually returned, and whether splice or vectored
read was used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is just cleanup, no change in functionality.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After fae5096ad2 "nfsd: assume writeable exportabled filesystems have
f_sync" we no longer modify this argument.
This is just cleanup, no change in functionality.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I only implemented the sync version of this call, since it's the
easiest. I can simply call vfs_copy_range() and have the vfs do the
right thing for the filesystem being exported.
Signed-off-by: Anna Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's some odd logic in nfsd_create() that allows it to be called with
the parent directory either locked or unlocked. The only already-locked
caller is NFSv2's nfsd_proc_create(). It's less confusing to split out
the unlocked case into a separate function which the NFSv2 code can call
directly.
Also fix some comments while we're here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use the result of a local read to determine when to set the eof flag. This
allows us to return the location of the end of the file atomically at the
time of the read.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
[bfields: add some documentation]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is basically a remote version of the btrfs CLONE operation,
so the implementation is fairly trivial. Made even more trivial
by stealing the XDR code and general framework Anna Schumaker's
COPY prototype.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
According to rfc5661 18.16.4,
"If EXCLUSIVE4_1 was used, the client determines the attributes
used for the verifier by comparing attrset with cva_attrs.attrmask;"
So, EXCLUSIVE4_1 also needs those bitmask used to store the verifier.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch changes nfs4_preprocess_stateid_op so it always returns
a valid struct file if it has been asked for that. For that we
now allocate a temporary struct file for special stateids, and check
permissions if we got the file structure from the stateid. This
ensures that all callers will get their handling of special stateids
right, and avoids code duplication.
There is a little wart in here because the read code needs to know
if we allocated a file structure so that it can copy around the
read-ahead parameters. In the long run we should probably aim to
cache full file structures used with special stateids instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Refactor the raparam hash helpers to just deal with the raparms,
and keep opening/closing files separate from that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull nfsd updates from Bruce Fields:
"A comparatively quieter cycle for nfsd this time, but still with two
larger changes:
- RPC server scalability improvements from Jeff Layton (using RCU
instead of a spinlock to find idle threads).
- server-side NFSv4.2 ALLOCATE/DEALLOCATE support from Anna
Schumaker, enabling fallocate on new clients"
* 'for-3.19' of git://linux-nfs.org/~bfields/linux: (32 commits)
nfsd4: fix xdr4 count of server in fs_location4
nfsd4: fix xdr4 inclusion of escaped char
sunrpc/cache: convert to use string_escape_str()
sunrpc: only call test_bit once in svc_xprt_received
fs: nfsd: Fix signedness bug in compare_blob
sunrpc: add some tracepoints around enqueue and dequeue of svc_xprt
sunrpc: convert to lockless lookup of queued server threads
sunrpc: fix potential races in pool_stats collection
sunrpc: add a rcu_head to svc_rqst and use kfree_rcu to free it
sunrpc: require svc_create callers to pass in meaningful shutdown routine
sunrpc: have svc_wake_up only deal with pool 0
sunrpc: convert sp_task_pending flag to use atomic bitops
sunrpc: move rq_cachetype field to better optimize space
sunrpc: move rq_splice_ok flag into rq_flags
sunrpc: move rq_dropme flag into rq_flags
sunrpc: move rq_usedeferral flag to rq_flags
sunrpc: move rq_local field to rq_flags
sunrpc: add a generic rq_flags field to svc_rqst and move rq_secure to it
nfsd: minor off by one checks in __write_versions()
sunrpc: release svc_pool_map reference when serv allocation fails
...
The ALLOCATE operation is used to preallocate space in a file. I can do
this by using vfs_fallocate() to do the actual preallocation.
ALLOCATE only returns a status indicator, so we don't need to write a
special encode() function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit db2e747b14 (vfs: remove mode parameter from vfs_symlink())
have remove mode parameter from vfs_symlink.
So that, iattr isn't needed by nfsd_symlink now, just remove it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently nfsd_symlink has a weird hack to serve callers who don't
null-terminate symlink data: it looks ahead at the next byte to see if
it's zero, and copies it to a new buffer to null-terminate if not.
That means callers don't have to null-terminate, but they *do* have to
ensure that the byte following the end of the data is theirs to read.
That's a bit subtle, and the NFSv4 code actually got this wrong.
So let's just throw out that code and let callers pass null-terminated
strings; we've already fixed them to do that.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The callers expect a __be32 return and the functions they call return
__be32, so having these return int is just wrong. Also, nfsd_finish_read
can be made static.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The splice and readv cases are actually quite different--for example the
former case ignores the array of vectors we build up for the latter.
It is probably clearer to separate the two cases entirely.
There's some code duplication between the split out encoders, but this
is only temporary and will be fixed by a later patch.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull nfsd updates from Bruce Fields:
- Handle some loose ends from the vfs read delegation support.
(For example nfsd can stop breaking leases on its own in a
fewer places where it can now depend on the vfs to.)
- Make life a little easier for NFSv4-only configurations
(thanks to Kinglong Mee).
- Fix some gss-proxy problems (thanks Jeff Layton).
- miscellaneous bug fixes and cleanup
* 'for-3.14' of git://linux-nfs.org/~bfields/linux: (38 commits)
nfsd: consider CLAIM_FH when handing out delegation
nfsd4: fix delegation-unlink/rename race
nfsd4: delay setting current_fh in open
nfsd4: minor nfs4_setlease cleanup
gss_krb5: use lcm from kernel lib
nfsd4: decrease nfsd4_encode_fattr stack usage
nfsd: fix encode_entryplus_baggage stack usage
nfsd4: simplify xdr encoding of nfsv4 names
nfsd4: encode_rdattr_error cleanup
nfsd4: nfsd4_encode_fattr cleanup
minor svcauth_gss.c cleanup
nfsd4: better VERIFY comment
nfsd4: break only delegations when appropriate
NFSD: Fix a memory leak in nfsd4_create_session
sunrpc: get rid of use_gssp_lock
sunrpc: fix potential race between setting use_gss_proxy and the upcall rpc_clnt
sunrpc: don't wait for write before allowing reads from use-gss-proxy file
nfsd: get rid of unused function definition
Define op_iattr for nfsd4_open instead using macro
NFSD: fix compile warning without CONFIG_NFSD_V3
...
Remove the boilerplate code to marshall and unmarhall ACL objects into
xattrs and operate on the posix_acl objects directly. Also move all
the ACL handling code into nfs?acl.c where it belongs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Implement labeled NFS on the server: encoding and decoding, and writing
and reading, of file labels.
Enabled with CONFIG_NFSD_V4_SECURITY_LABEL.
Signed-off-by: Matthew N. Dodd <Matthew.Dodd@sparta.com>
Signed-off-by: Miguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: Phua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: Khin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The fh_lock_parent(), nfsd_truncate(), nfsd_notify_change() and
nfsd_sync_dir() fuctions are neither implemented nor used, just remove
them.
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When mnt_want_write() starts to handle freezing it will get a full lock
semantics requiring proper lock ordering. So push mnt_want_write() call
consistently outside of i_mutex.
CC: linux-nfs@vger.kernel.org
CC: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use 32-bit or 64-bit llseek() hashes for directory offsets depending on
the NFS version. NFSv2 gets 32-bit hashes only.
NOTE: This patch got rather complex as Christoph asked to set the
filp->f_mode flag in the open call or immediatly after dentry_open()
in nfsd_open() to avoid races.
Personally I still do not see a reason for that and in my opinion
FMODE_32BITHASH/FMODE_64BITHASH flags could be set nfsd_readdir(), as it
follows directly after nfsd_open() without a chance of races.
Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: J. Bruce Fields<bfields@redhat.com>
A bunch of places in nfsd does mnt_{want,drop}_write on vfsmount of
export of given fhandle. Switched to obvious inlined helpers...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If we create the object and then return failure to the client, we're
left with an unexpected file in the filesystem.
I'm trying to eliminate such cases but not 100% sure I have so an
assertion might be helpful for now.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A client that wants to execute a file must be able to read it. Read
opens over nfs are therefore implicitly allowed for executable files
even when those files are not readable.
NFSv2/v3 get this right by using a passed-in NFSD_MAY_OWNER_OVERRIDE on
read requests, but NFSv4 has gotten this wrong ever since
dc730e1737 "nfsd4: fix owner-override on
open", when we realized that the file owner shouldn't override
permissions on non-reclaim NFSv4 opens.
So we can't use NFSD_MAY_OWNER_OVERRIDE to tell nfsd_permission to allow
reads of executable files.
So, do the same thing we do whenever we encounter another weird NFS
permission nit: define yet another NFSD_MAY_* flag.
The industry's future standardization on 128-bit processors will be
motivated primarily by the need for integers with enough bits for all
the NFSD_MAY_* flags.
Reported-by: Leonardo Borda <leonardoborda@gmail.com>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The NFS server uses nfsd_create_v3 to handle EXCLUSIVE4_1 opens, but
that function is not prepared to handle them.
Rename nfsd_create_v3() to do_nfsd_create(), and add handling of
EXCLUSIVE4_1.
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Most of the NFSD_MAY_* flags actually request permissions, but over the
years we've accreted a few that modify the behavior of the permission or
open code in other ways.
Distinguish the two cases a little more. In particular, allow the
shortcut at the start of nfsd_permission to ignore the
non-permission-requesting bits.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Christoph points that the NFSv2/v3 callers know which case they want
here, so we may as well just call the file=NULL case directly instead of
making this conditional.
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is the second attempt to fix the problem whereby a COMMIT call
causes a lease break and triggers a possible deadlock.
The problem is that nfsd attempts to break a lease on a COMMIT call.
This triggers a delegation recall if the lease is held for a delegation.
If the client is the one holding the delegation and it's the same one on
which it's issuing the COMMIT, then it can't return that delegation
until the COMMIT is complete. But, nfsd won't complete the COMMIT until
the delegation is returned. The client and server are essentially
deadlocked until the state is marked bad (due to the client not
responding on the callback channel).
The first patch attempted to deal with this by eliminating the open of
the file altogether and simply had nfsd_commit pass a NULL file pointer
to the vfs_fsync_range. That would conflict with some work in progress
by Christoph Hellwig to clean up the fsync interface, so this patch
takes a different approach.
This declares a new NFSD_MAY_NOT_BREAK_LEASE access flag that indicates
to nfsd_open that it should not break any leases when opening the file,
and has nfsd_commit set that flag on the nfsd_open call.
For now, this patch leaves nfsd_commit opening the file with write
access since I'm not clear on what sort of access would be more
appropriate.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
As with lookup, we treat every boject as a mountpoint and pretend it
doesn't exist if it isn't exported.
The preexisting code here is confusing, but I haven't yet figured out
how to make it clearer.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
None of this stuff is used outside nfsd, so move it out of the common
linux include directory.
Actually, probably none of the stuff in include/linux/nfsd/nfsd.h really
belongs there, so later we may remove that file entirely.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
J. Bruce Fields