[ Upstream commit 00bb7e763e ]
The IPMI spec has a time (T6) specified between request retries. Add
the handling for that.
Reported by: Tony Camuso <tcamuso@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39721d62bb ]
The spec states that the minimum message retry time is 60ms, but it was
set to 20ms. Correct it.
Reported by: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Stable-dep-of: 00bb7e763e ("ipmi:ssif: Add a timer between request retries")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e8b89926f ]
It was cruft left over from older handling of run to completion.
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f1324bbc40 upstream.
AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS. This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.
This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d5 ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.
So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions. As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.
It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.
Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it. If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.
Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439d5 ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8230831c43 upstream.
Rename the SSIF_IDLE() to IS_SSIF_IDLE(), since that is more clear, and
rename SSIF_NORMAL to SSIF_IDLE, since that's more accurate.
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95767ed78a upstream.
The resend_msg() function cannot fail, but there was error handling
around using it. Rework the handling of the error, and fix the out of
retries debug reporting that was wrong around this, too.
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ce4273d89c ]
As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.
If we break the loop in applicom_init() with 'dev' not NULL, we need to
call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221122114035.24194-1-wangxiongfeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70fae37a09 ]
This reverts commit be826ada52.
The function monitor_card() is a timer handler that runs in an
atomic context, but it calls usleep_range() that can sleep.
As a result, the sleep-in-atomic-context bugs will happen.
The process is shown below:
(atomic context)
monitor_card()
set_protocol()
usleep_range() //sleep
The origin commit c1986ee9be ("[PATCH] New Omnikey Cardman
4000 driver") works fine.
Fixes: be826ada52 ("char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20230118141000.5580-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de4eda9de2 ]
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: 6dd88fd59d ("vhost-scsi: unbreak any layout for response")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1382999aa0 upstream.
TPM 1 is sometimes broken across system suspends, due to races or
locking issues or something else that haven't been diagnosed or fixed
yet, most likely having to do with concurrent reads from the TPM's
hardware random number generator driver. These issues prevent the system
from actually suspending, with errors like:
tpm tpm0: A TPM error (28) occurred continue selftest
...
tpm tpm0: A TPM error (28) occurred attempting get random
...
tpm tpm0: Error (28) sending savestate before suspend
tpm_tis 00:08: PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28
tpm_tis 00:08: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 28
tpm_tis 00:08: PM: failed to suspend: error 28
PM: Some devices failed to suspend, or early wake event detected
This issue was partially fixed by 23393c6461 ("char: tpm: Protect
tpm_pm_suspend with locks"), in a last minute 6.1 commit that Linus took
directly because the TPM maintainers weren't available. However, it
seems like this just addresses the most common cases of the bug, rather
than addressing it entirely. So there are more things to fix still,
apparently.
In lieu of actually fixing the underlying bug, just allow system suspend
to continue, so that laptops still go to sleep fine. Later, this can be
reverted when the real bug is fixed.
Link: https://lore.kernel.org/lkml/7cbe96cf-e0b5-ba63-d1b4-f63d2e826efa@suse.cz/
Cc: stable@vger.kernel.org # 6.1+
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Luigi Semenzato <semenzato@chromium.org>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a92ce570c8 upstream.
The intf_free() function frees the "intf" pointer so we cannot
dereference it again on the next line.
Fixes: cbb79863fc ("ipmi: Don't allow device module unload when in use")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Message-Id: <Y3M8xa1drZv4CToE@kili>
Cc: <stable@vger.kernel.org> # 5.5+
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6f1234d98 upstream.
When fixing the problem mentioned in PATCH1, we also found
the following problem:
If the IPMI is disconnected and in the sending process, the
uninstallation driver will be stuck for a long time.
The main problem is that uninstalling the driver waits for curr_msg to
be sent or HOSED. After stopping tasklet, the only place to trigger the
timeout mechanism is the circular poll in shutdown_smi.
The poll function delays 10us and calls smi_event_handler(smi_info,10).
Smi_event_handler deducts 10us from kcs->ibf_timeout.
But the poll func is followed by schedule_timeout_uninterruptible(1).
The time consumed here is not counted in kcs->ibf_timeout.
So when 10us is deducted from kcs->ibf_timeout, at least 1 jiffies has
actually passed. The waiting time has increased by more than a
hundredfold.
Now instead of calling poll(). call smi_event_handler() directly and
calculate the elapsed time.
For verification, you can directly use ebpf to check the kcs->
ibf_timeout for each call to kcs_event() when IPMI is disconnected.
Decrement at normal rate before unloading. The decrement rate becomes
very slow after unloading.
$ bpftrace -e 'kprobe:kcs_event {printf("kcs->ibftimeout : %d\n",
*(arg0+584));}'
Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <20221007092617.87597-3-zhangyuchen.lcr@bytedance.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f576b2593 upstream.
Now that we have get_random_u32_below(), it's nearly trivial to make
inline helpers to compute get_random_u32_above() and
get_random_u32_inclusive(), which will help clean up open coded loops
and manual computations throughout the tree.
One snag is that in order to make get_random_u32_inclusive() operate on
closed intervals, we have to do some (unlikely) special case handling if
get_random_u32_inclusive(0, U32_MAX) is called. The least expensive way
of doing this is actually to adjust the slowpath of
get_random_u32_below() to have its undefined 0 result just return the
output of get_random_u32(). We can make this basically free by calling
get_random_u32() before the branch, so that the branch latency gets
interleaved.
Cc: stable@vger.kernel.org # to ease future backports that use this api
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9a688bcb1 upstream.
Until the very recent commits, many bounded random integers were
calculated using `get_random_u32() % max_plus_one`, which not only
incurs the price of a division -- indicating performance mostly was not
a real issue -- but also does not result in a uniformly distributed
output if max_plus_one is not a power of two. Recent commits moved to
using `prandom_u32_max(max_plus_one)`, which replaces the division with
a faster multiplication, but still does not solve the issue with
non-uniform output.
For some users, maybe this isn't a problem, and for others, maybe it is,
but for the majority of users, probably the question has never been
posed and analyzed, and nobody thought much about it, probably assuming
random is random is random. In other words, the unthinking expectation
of most users is likely that the resultant numbers are uniform.
So we implement here an efficient way of generating uniform bounded
random integers. Through use of compile-time evaluation, and avoiding
divisions as much as possible, this commit introduces no measurable
overhead. At least for hot-path uses tested, any potential difference
was lost in the noise. On both clang and gcc, code generation is pretty
small.
The new function, get_random_u32_below(), lives in random.h, rather than
prandom.h, and has a "get_random_xxx" function name, because it is
suitable for all uses, including cryptography.
In order to be efficient, we implement a kernel-specific variant of
Daniel Lemire's algorithm from "Fast Random Integer Generation in an
Interval", linked below. The kernel's variant takes advantage of
constant folding to avoid divisions entirely in the vast majority of
cases, works on both 32-bit and 64-bit architectures, and requests a
minimal amount of bytes from the RNG.
Link: https://arxiv.org/pdf/1805.10941.pdf
Cc: stable@vger.kernel.org # to ease future backports that use this api
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db9622f762 upstream.
In check_acpi_tpm2(), we get the TPM2 table just to make
sure the table is there, not used after the init, so the
acpi_put_table() should be added to release the ACPI memory.
Fixes: 4cb586a188 ("tpm_tis: Consolidate the platform and acpi probe flow")
Cc: stable@vger.kernel.org
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 37e90c374d upstream.
In crb_acpi_add(), we get the TPM2 table to retrieve information
like start method, and then assign them to the priv data, so the
TPM2 table is not used after the init, should be freed, call
acpi_put_table() to fix the memory leak.
Fixes: 30fc8d138e ("tpm: TPM 2.0 CRB Interface")
Cc: stable@vger.kernel.org
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8740a12ca2 upstream.
The start and length of the event log area are obtained from
TPM2 or TCPA table, so we call acpi_get_table() to get the
ACPI information, but the acpi_get_table() should be coupled with
acpi_put_table() to release the ACPI memory, add the acpi_put_table()
properly to fix the memory leak.
While we are at it, remove the redundant empty line at the
end of the tpm_read_log_acpi().
Fixes: 0bfb237460 ("tpm: Move eventlog files to a subdirectory")
Fixes: 85467f63a0 ("tpm: Add support for event log pointer found in TPM2 ACPI table")
Cc: stable@vger.kernel.org
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 36992eb6b9 ]
After the IPMI disconnect problem, the memory kept rising and we tried
to unload the driver to free the memory. However, only part of the
free memory is recovered after the driver is uninstalled. Using
ebpf to hook free functions, we find that neither ipmi_user nor
ipmi_smi_msg is free, only ipmi_recv_msg is free.
We find that the deliver_smi_err_response call in clean_smi_msgs does
the destroy processing on each message from the xmit_msg queue without
checking the return value and free ipmi_smi_msg.
deliver_smi_err_response is called only at this location. Adding the
free handling has no effect.
To verify, try using ebpf to trace the free function.
$ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc rcv
%p\n",retval);} kprobe:free_recv_msg {printf("free recv %p\n",
arg0)} kretprobe:ipmi_alloc_smi_msg {printf("alloc smi %p\n",
retval);} kprobe:free_smi_msg {printf("free smi %p\n",arg0)}'
Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <20221007092617.87597-4-zhangyuchen.lcr@bytedance.com>
[Fixed the comment above handle_one_recv_msg().]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f6ec8dc57 ]
for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. We add a new struct
'amd_geode_priv' to record pointer of the pci_dev and membase, and then
add missing pci_dev_put() for the normal and error path.
Fixes: ef5d862734 ("[PATCH] Add Geode HW RNG driver")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecadb5b011 ]
for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() for the normal and error path.
Fixes: 96d63c0297 ("[PATCH] Add AMD HW RNG driver")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f90bc0f97f ]
The ASPEED KCS devices don't provide a BMC-side interrupt for the host
reading the output data register (ODR). The act of the host reading ODR
clears the output buffer full (OBF) flag in the status register (STR),
informing the BMC it can transmit a subsequent byte.
On the BMC side the KCS client must enable the OBE event *and* perform a
subsequent read of STR anyway to avoid races - the polling provides a
window for the host to read ODR if data was freshly written while
minimising BMC-side latency.
Fixes: 28651e6c42 ("ipmi: kcs_bmc: Allow clients to control KCS IRQ state")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20220812144741.240315-1-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f526406807 ]
The error message in __crb_relinquish_locality() mentions requestAccess
instead of Relinquish. Fix it.
Fixes: 888d867df4 ("tpm: cmd_ready command can be issued only after granting locality")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b7d07f7ac ]
The ftpm_mod_init() returns the driver_register() directly without checking
its return value, if driver_register() failed, the ftpm_tee_plat_driver is
not unregistered.
Fix by unregister ftpm_tee_plat_driver when driver_register() failed.
Fixes: 9f1944c23c ("tpm_ftpm_tee: register driver on TEE bus")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bfda9c73f ]
The check for cancelled request depends on the VID of the chip, but
some chips share VID which shouldn't share their cancellation
behavior. This is the case for the Nuvoton NPCT75X, which should use
the default cancellation check, not the Winbond one.
To avoid changing the existing behavior, add a new flag to indicate
that the chip should use the default cancellation check and set it
for the I2C TPM2 TIS driver.
Fixes: bbc23a07b0 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 561d6ef756 ]
The sanity check mask for TPM_INT_ENABLE register was off by 8 bits,
resulting in failure to probe if the TPM_INT_ENABLE register was a
valid value.
Fixes: bbc23a07b0 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently tpm transactions are executed unconditionally in
tpm_pm_suspend() function, which may lead to races with other tpm
accessors in the system.
Specifically, the hw_random tpm driver makes use of tpm_get_random(),
and this function is called in a loop from a kthread, which means it's
not frozen alongside userspace, and so can race with the work done
during system suspend:
tpm tpm0: tpm_transmit: tpm_recv: error -52
tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics
CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
Call Trace:
tpm_tis_status.cold+0x19/0x20
tpm_transmit+0x13b/0x390
tpm_transmit_cmd+0x20/0x80
tpm1_pm_suspend+0xa6/0x110
tpm_pm_suspend+0x53/0x80
__pnp_bus_suspend+0x35/0xe0
__device_suspend+0x10f/0x350
Fix this by calling tpm_try_get_ops(), which itself is a wrapper around
tpm_chip_start(), but takes the appropriate mutex.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/all/c5ba47ef-393f-1fba-30bd-1230d1b4b592@suse.cz/
Cc: stable@vger.kernel.org
Fixes: e891db1a18 ("tpm: turn on TPM on suspend for TPM 1.x")
[Jason: reworked commit message, added metadata]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While reworking the archrandom handling, commit d349ab99ee ("random:
handle archrandom with multiple longs") switched to the non-early
archrandom helpers in random_init(), which broke initialization of the
entropy pool from the arm64 random generator.
Indeed at that point the arm64 CPU features, which verify that all CPUs
have compatible capabilities, are not finalized so arch_get_random_seed_longs()
is unsuccessful. Instead random_init() should use the _early functions,
which check only the boot CPU on arm64. On other architectures the
_early functions directly call the normal ones.
Fixes: d349ab99ee ("random: handle archrandom with multiple longs")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
untrusted sources into /dev/random.
-----BEGIN PGP SIGNATURE-----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=qugm
-----END PGP SIGNATURE-----
Merge tag 'v6.1-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes an issue exposed by the recent change to feed untrusted
sources into /dev/random"
* tag 'v6.1-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
hwrng: bcm2835 - use hwrng_msleep() instead of cpu_relax()
With no callers left of prandom_u32() and prandom_bytes(), as well as
get_random_int(), remove these deprecated wrappers, in favor of
get_random_u32() and get_random_bytes().
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This is mostly just doc, config, and little tweaks. Nothing big, which
is why there was nothing for 6.0. There is one crash fix, but it's not
something that I think anyone is using yet.
-----BEGIN PGP SIGNATURE-----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=wVwj
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.1-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Fix a bunch of little problems in IPMI
This is mostly just doc, config, and little tweaks. Nothing big, which
is why there was nothing for 6.0. There is one crash fix, but it's not
something that I think anyone is using yet"
* tag 'for-linus-6.1-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Remove unused struct watcher_entry
ipmi: kcs: aspeed: Update port address comments
ipmi: Add __init/__exit annotations to module init/exit funcs
ipmi:ipmb: Don't call ipmi_unregister_smi() on a register failure
ipmi:ipmb: Fix a vague comment and a typo
dt-binding: ipmi: add fallback to npcm845 compatible
ipmi: Fix comment typo
char: ipmi: modify NPCM KCS configuration
dt-bindings: ipmi: Add npcm845 compatible
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCYzylIxIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9IDBwEAmoMCHzq2JseDBj21H5iLXrB2G5Vl80a9
UW363r09ht4A/RnvCIdFcaYYdawhQbcBWkRSYezDOPu6hopwrElb9+ID
=l5my
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Just a few bug fixes this time"
* tag 'tpmdd-next-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle
security/keys: Remove inconsistent __user annotation
char: move from strlcpy with unused retval to strscpy
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmM++NMACgkQSfxwEqXe
A65f3w//eRwdaZV5eX3m9eb3CsNnnut2dDKNG+HrImd+z+96CbpBCsyZN2p5uDMw
pPownat8Ejv6P6E0ztOAyCsFDnS0Tf2YjdVOZ9txif5zIwqoM8TYbmHlmm7JhACc
hDoblbICTf/bmSURWQOCdkayPhqIyV61pF5hwXXQuCAMoanHzDWbH1yxMmBMCQYJ
P6fA0r2BYniC90o/C0HvToeIw7tTGxBm2Lki/S9cWOFCzPBwQytBbE7AD4rBP8+Y
ryHdcpKaXLF9C1zSlYfyLBbBGR3Oe+DBLl081q3LkTjnnoPbLEtJE1B644K5FiOJ
ySkeHZoMeGB2fisoEJAaEf1GjA1I6f1fcmTlY57XbR/iU3gfQE6+06CwVJBUoqtx
Q71FMU+AMoc1ZfDVQB8NC+RdifV1qRhzVPrawhCPPfx8ngR8yKekh9RYwp0xpGPL
RoAqswoOwOW20BalNxRipLji1URcZGH1d3QgkjdIwxvodyPsiGg74LJ9xBYWccfv
jBS6vNEGgWYUtMA/20W0HowSizA89Rl9REBd7M8q+eLOhJ/AsUgzuJ9noODBe6OV
PO4NDWXwaud64gDHtPhomah/14zej53yomlC/qJ9cJN4uPo6J3u9phqcaOWHjgPX
AKYRGWxCgnwpf7g6v4S/35kU+OEs9fS+oDKUzUY8s7lhNM4qCK0=
=KGwF
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Huawei reported that when they updated their kernel from 4.4 to
something much newer, some userspace code they had broke, the culprit
being the accidental removal of O_NONBLOCK from /dev/random way back
in 5.6. It's been gone for over 2 years now and this is the first
we've heard of it, but userspace breakage is userspace breakage, so
O_NONBLOCK is now back.
- Use randomness from hardware RNGs much more often during early boot,
at the same interval that crng reseeds are done, from Dominik.
- A semantic change in hardware RNG throttling, so that the hwrng
framework can properly feed random.c with randomness from hardware
RNGs that aren't specifically marked as creditable.
A related patch coming to you via Herbert's hwrng tree depends on
this one, not to compile, but just to function properly, so you may
want to merge this PULL before that one.
- A fix to clamp credited bits from the interrupts pool to the size of
the pool sample. This is mainly just a theoretical fix, as it'd be
pretty hard to exceed it in practice.
- Oracle reported that InfiniBand TCP latency regressed by around
10-15% after a change a few cycles ago made at the request of the RT
folks, in which we hoisted a somewhat rare operation (1 in 1024
times) out of the hard IRQ handler and into a workqueue, a pretty
common and boring pattern.
It turns out, though, that scheduling a worker from there has
overhead of its own, whereas scheduling a timer on that same CPU for
the next jiffy amortizes better and doesn't incur the same overhead.
I also eliminated a cache miss by moving the work_struct (and
subsequently, the timer_list) to below a critical cache line, so that
the more critical members that are accessed on every hard IRQ aren't
split between two cache lines.
- The boot-time initialization of the RNG has been split into two
approximate phases: what we can accomplish before timekeeping is
possible and what we can accomplish after.
This winds up being useful so that we can use RDRAND to seed the RNG
before CONFIG_SLAB_FREELIST_RANDOM=y systems initialize slabs, in
addition to other early uses of randomness. The effect is that
systems with RDRAND (or a bootloader seed) will never see any
warnings at all when setting CONFIG_WARN_ALL_UNSEEDED_RANDOM=y. And
kfence benefits from getting a better seed of its own.
- Small systems without much entropy sometimes wind up putting some
truncated serial number read from flash into hostname, so contribute
utsname changes to the RNG, without crediting.
- Add smaller batches to serve requests for smaller integers, and make
use of them when people ask for random numbers bounded by a given
compile-time constant. This has positive effects all over the tree,
most notably in networking and kfence.
- The original jitter algorithm intended (I believe) to schedule the
timer for the next jiffy, not the next-next jiffy, yet it used
mod_timer(jiffies + 1), which will fire on the next-next jiffy,
instead of what I believe was intended, mod_timer(jiffies), which
will fire on the next jiffy. So fix that.
- Fix a comment typo, from William.
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: clear new batches when bringing new CPUs online
random: fix typos in get_random_bytes() comment
random: schedule jitter credit for next jiffy, not in two jiffies
prandom: make use of smaller types in prandom_u32_max
random: add 8-bit and 16-bit batches
utsname: contribute changes to RNG
random: use init_utsname() instead of utsname()
kfence: use better stack hash seed
random: split initialization into early step and later step
random: use expired timer rather than wq for mixing fast pool
random: avoid reading two cache lines on irq randomness
random: clamp credited irq bits to maximum mixed
random: throttle hwrng writes if no entropy is credited
random: use hwgenerator randomness more frequently at early boot
random: restore O_NONBLOCK support
Here is the big set of TTY and Serial driver updates for 6.1-rc1.
Lots of cleanups in here, no real new functionality this time around,
with the diffstat being that we removed more lines than we added!
Included in here are:
- termios unification cleanups from Al Viro, it's nice to
finally get this work done
- tty serial transmit cleanups in various drivers in preparation
for more cleanup and unification in future releases (that work
was not ready for this release.)
- n_gsm fixes and updates
- ktermios cleanups and code reductions
- dt bindings json conversions and updates for new devices
- some serial driver updates for new devices
- lots of other tiny cleanups and janitorial stuff. Full
details in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0BSdA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylucQCfaXIrYuh2AHcb6+G+Nqp1xD2BYaEAoIdLyOCA
a2yziLrDF6us2oav6j4x
=Wv+X
-----END PGP SIGNATURE-----
Merge tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.1-rc1.
Lots of cleanups in here, no real new functionality this time around,
with the diffstat being that we removed more lines than we added!
Included in here are:
- termios unification cleanups from Al Viro, it's nice to finally get
this work done
- tty serial transmit cleanups in various drivers in preparation for
more cleanup and unification in future releases (that work was not
ready for this release)
- n_gsm fixes and updates
- ktermios cleanups and code reductions
- dt bindings json conversions and updates for new devices
- some serial driver updates for new devices
- lots of other tiny cleanups and janitorial stuff. Full details in
the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits)
serial: cpm_uart: Don't request IRQ too early for console port
tty: serial: do unlock on a common path in altera_jtaguart_console_putc()
tty: serial: unify TX space reads under altera_jtaguart_tx_space()
tty: serial: use FIELD_GET() in lqasc_tx_ready()
tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar()
tty: serial: allow pxa.c to be COMPILE_TESTed
serial: stm32: Fix unused-variable warning
tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL
serial: 8250: Fix restoring termios speed after suspend
serial: Deassert Transmit Enable on probe in driver-specific way
serial: 8250_dma: Convert to use uart_xmit_advance()
serial: 8250_omap: Convert to use uart_xmit_advance()
MAINTAINERS: Solve warning regarding inexistent atmel-usart binding
serial: stm32: Deassert Transmit Enable on ->rs485_config()
serial: ar933x: Deassert Transmit Enable on ->rs485_config()
tty: serial: atmel: Use FIELD_PREP/FIELD_GET
tty: serial: atmel: Make the driver aware of the existence of GCLK
tty: serial: atmel: Only divide Clock Divisor if the IP is USART
tty: serial: atmel: Separate mode clearing between UART and USART
dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
...
The commit that added the new get_random_{u8,u16}() functions neglected
to update the code that clears the batches when bringing up a new CPU.
It also forgot a few comments and helper defines, so add those in too.
Fixes: 585cd5fe9f ("random: add 8-bit and 16-bit batches")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Remove extra whitespace and add a missing word to a sentence describing
get_random_bytes().
Signed-off-by: William Zijl <postmaster@gusted.xyz>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Counterintuitively, mod_timer(..., jiffies + 1) will cause the timer to
fire not in the next jiffy, but in two jiffies. The way to cause
the timer to fire in the next jiffy is with mod_timer(..., jiffies).
Doing so then lets us bump the upper bound back up again.
Fixes: 50ee7529ec ("random: try to actively add entropy rather than passively wait for it")
Fixes: 829d680e82 ("random: cap jitter samples per bit to factor of HZ")
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Start the hwrng kthread even if the hwrng source has a quality setting
of zero. Then, every crng reseed interval, one batch of data from this
zero-quality hwrng source will be mixed into the CRNG pool.
This patch is based on the assumption that data from a hwrng source
will not actively harm the CRNG state. Instead, many hwrng sources
(such as TPM devices), even though they are assigend a quality level of
zero, actually provide some entropy, which is good enough to mix into
the CRNG pool every once in a while.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are numerous places in the kernel that would be sped up by having
smaller batches. Currently those callsites do `get_random_u32() & 0xff`
or similar. Since these are pretty spread out, and will require patches
to multiple different trees, let's get ahead of the curve and lay the
foundation for `get_random_u8()` and `get_random_u16()`, so that it's
then possible to start submitting conversion patches leisurely.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than going through the current-> indirection for utsname, at this
point in boot, init_utsname()==utsname(), so just use it directly that
way. Additionally, init_utsname() appears to be available nearly always,
so move it into random_init_early().
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The full RNG initialization relies on some timestamps, made possible
with initialization functions like time_init() and timekeeping_init().
However, these are only available rather late in initialization.
Meanwhile, other things, such as memory allocator functions, make use of
the RNG much earlier.
So split RNG initialization into two phases. We can provide arch
randomness very early on, and then later, after timekeeping and such are
available, initialize the rest.
This ensures that, for example, slabs are properly randomized if RDRAND
is available. Without this, CONFIG_SLAB_FREELIST_RANDOM=y loses a degree
of its security, because its random seed is potentially deterministic,
since it hasn't yet incorporated RDRAND. It also makes it possible to
use a better seed in kfence, which currently relies on only the cycle
counter.
Another positive consequence is that on systems with RDRAND, running
with CONFIG_WARN_ALL_UNSEEDED_RANDOM=y results in no warnings at all.
One subtle side effect of this change is that on systems with no RDRAND,
RDTSC is now only queried by random_init() once, committing the moment
of the function call, instead of multiple times as before. This is
intentional, as the multiple RDTSCs in a loop before weren't
accomplishing very much, with jitter being better provided by
try_to_generate_entropy(). Plus, filling blocks with RDTSC is still
being done in extract_entropy(), which is necessarily called before
random bytes are served anyway.
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Previously, the fast pool was dumped into the main pool periodically in
the fast pool's hard IRQ handler. This worked fine and there weren't
problems with it, until RT came around. Since RT converts spinlocks into
sleeping locks, problems cropped up. Rather than switching to raw
spinlocks, the RT developers preferred we make the transformation from
originally doing:
do_some_stuff()
spin_lock()
do_some_other_stuff()
spin_unlock()
to doing:
do_some_stuff()
queue_work_on(some_other_stuff_worker)
This is an ordinary pattern done all over the kernel. However, Sherry
noticed a 10% performance regression in qperf TCP over a 40gbps
InfiniBand card. Quoting her message:
> MT27500 Family [ConnectX-3] cards:
> Infiniband device 'mlx4_0' port 1 status:
> default gid: fe80:0000:0000:0000:0010:e000:0178:9eb1
> base lid: 0x6
> sm lid: 0x1
> state: 4: ACTIVE
> phys state: 5: LinkUp
> rate: 40 Gb/sec (4X QDR)
> link_layer: InfiniBand
>
> Cards are configured with IP addresses on private subnet for IPoIB
> performance testing.
> Regression identified in this bug is in TCP latency in this stack as reported
> by qperf tcp_lat metric:
>
> We have one system listen as a qperf server:
> [root@yourQperfServer ~]# qperf
>
> Have the other system connect to qperf server as a client (in this
> case, it’s X7 server with Mellanox card):
> [root@yourQperfClient ~]# numactl -m0 -N0 qperf 20.20.20.101 -v -uu -ub --time 60 --wait_server 20 -oo msg_size:4K:1024K:*2 tcp_lat
Rather than incur the scheduling latency from queue_work_on, we can
instead switch to running on the next timer tick, on the same core. This
also batches things a bit more -- once per jiffy -- which is okay now
that mix_interrupt_randomness() can credit multiple bits at once.
Reported-by: Sherry Yang <sherry.yang@oracle.com>
Tested-by: Paul Webb <paul.x.webb@oracle.com>
Cc: Sherry Yang <sherry.yang@oracle.com>
Cc: Phillip Goerl <phillip.goerl@oracle.com>
Cc: Jack Vogel <jack.vogel@oracle.com>
Cc: Nicky Veitch <nicky.veitch@oracle.com>
Cc: Colm Harrington <colm.harrington@oracle.com>
Cc: Ramanan Govindarajan <ramanan.govindarajan@oracle.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: stable@vger.kernel.org
Fixes: 58340f8e95 ("random: defer fast pool mixing to worker")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
In order to avoid reading and dirtying two cache lines on every IRQ,
move the work_struct to the bottom of the fast_pool struct. add_
interrupt_randomness() always touches .pool and .count, which are
currently split, because .mix pushes everything down. Instead, move .mix
to the bottom, so that .pool and .count are always in the first cache
line, since .mix is only accessed when the pool is full.
Fixes: 58340f8e95 ("random: defer fast pool mixing to worker")
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
After commit e86ee2d44b44("ipmi: Rework locking and shutdown for hot remove"),
no one use struct watcher_entry, so remove it.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Message-Id: <20220927133814.98929-1-yuancan@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Since the most that's mixed into the pool is sizeof(long)*2, don't
credit more than that many bytes of entropy.
Fixes: e3e33fc2ea ("random: do not use input pool from hard IRQs")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
If a hwrng source does not provide an entropy estimate, it currently
does not contribute at all to the CRNG. In order to help fix this, in
case add_hwgenerator_randomness() is called with the entropy parameter
set to zero, go to sleep until one reseed interval has passed.
While the hwrng thread currently only runs under conditions where this
is non-zero, this change is not harmful and prepares for future updates
to the hwrng core.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Morten Linderud