Commit Graph

58 Commits

Author SHA1 Message Date
Chandra Seetharaman 5a52c2a581 xfs: Remove the macro XFS_BUF_ERROR and family
Remove the definitions and usage of the macros XFS_BUF_ERROR,
XFS_BUF_GETERROR and XFS_BUF_ISERROR.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-07-25 14:57:46 -05:00
Christoph Hellwig 69ef921b55 xfs: byteswap constants instead of variables
Micro-optimize various comparisms by always byteswapping the constant
instead of the variable, which allows to do the swap at compile instead
of runtime.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2011-07-08 14:36:05 +02:00
Christoph Hellwig 8f04c47aa9 xfs: split xfs_itruncate_finish
Split the guts of xfs_itruncate_finish that loop over the existing extents
and calls xfs_bunmapi on them into a new helper, xfs_itruncate_externs.
Make xfs_attr_inactive call it directly instead of xfs_itruncate_finish,
which allows to simplify the latter a lot, by only letting it deal with
the data fork.  As a result xfs_itruncate_finish is renamed to
xfs_itruncate_data to make its use case more obvious.

Also remove the sync parameter from xfs_itruncate_data, which has been
unessecary since the introduction of the busy extent list in 2002, and
completely dead code since 2003 when the XFS_BMAPI_ASYNC parameter was
made a no-op.

I can't actually see why the xfs_attr_inactive needs to set the transaction
sync, but let's keep this patch simple and without changes in behaviour.

Also avoid passing a useless argument to xfs_isize_check, and make it
private to xfs_inode.c.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2011-07-08 14:34:34 +02:00
Dave Chinner 4a33821236 xfs: prevent bogus assert when trying to remove non-existent attribute
If the attribute fork on an inode is in btree format and has
multiple levels (i.e node format rather than leaf format), then a
lookup failure will trigger an assert failure in xfs_da_path_shift
if the flag XFS_DA_OP_OKNOENT is not set. This flag is used to
indicate to the directory btree code that not finding an entry is
not a fatal error. In the case of doing a lookup for a directory
name removal, this is valid as a user cannot insert an arbitrary
name to remove from the directory btree.

However, in the case of the attribute tree, a user has direct
control over the attribute name and can ask for any random name to
be removed without any validation. In this case, fsstress is asking
for a non-existent user.selinux attribute to be removed, and that is
causing xfs_da_path_shift() to fall off the bottom of the tree where
it asserts that a lookup failure is allowed. Because the flag is not
set, we die a horrible death on a debug enable kernel.

Prevent this assert from firing on attribute removes by adding the
op_flag XFS_DA_OP_OKNOENT to atribute removal operations.

Discovered when testing on a SELinux enabled system by fsstress in
test 070 by trying to remove a non-existent user.selinux attribute.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-06-23 22:13:51 -05:00
Christoph Hellwig 1a1a3e97ba xfs: remove xfs_buf wrappers
Stop having two different names for many buffer functions and use
the more descriptive xfs_buf_* names directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-10-18 15:08:07 -05:00
Dave Chinner dcd79a1423 xfs: don't use vfs writeback for pure metadata modifications
Under heavy multi-way parallel create workloads, the VFS struggles
to write back all the inodes that have been changed in age order.
The bdi flusher thread becomes CPU bound, spending 85% of it's time
in the VFS code, mostly traversing the superblock dirty inode list
to separate dirty inodes old enough to flush.

We already keep an index of all metadata changes in age order - in
the AIL - and continued log pressure will do age ordered writeback
without any extra overhead at all. If there is no pressure on the
log, the xfssyncd will periodically write back metadata in ascending
disk address offset order so will be very efficient.

Hence we can stop marking VFS inodes dirty during transaction commit
or when changing timestamps during transactions. This will keep the
inodes in the superblock dirty list to those containing data or
unlogged metadata changes.

However, the timstamp changes are slightly more complex than this -
there are a couple of places that do unlogged updates of the
timestamps, and the VFS need to be informed of these. Hence add a
new function xfs_trans_ichgtime() for transactional changes,
and leave xfs_ichgtime() for the non-transactional changes.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-10-18 15:07:45 -05:00
Christoph Hellwig b4e9181e77 xfs: remove unused delta tracking code in xfs_bmapi
This code was introduced four years ago in commit
3e57ecf640 without any review and has
been unused since.  Remove it just as the rest of the code introduced
in that commit to reduce that stack usage and complexity in this central
piece of code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-07-26 13:16:39 -05:00
Christoph Hellwig 898621d5a7 xfs: simplify inode to transaction joining
Currently we need to either call IHOLD or xfs_trans_ihold on an inode when
joining it to a transaction via xfs_trans_ijoin.

This patches instead makes xfs_trans_ijoin usable on it's own by doing
an implicity xfs_trans_ihold, which also allows us to drop the third
argument.  For the case where we want to hold a reference on the inode
a xfs_trans_ijoin_ref wrapper is added which does the IHOLD and marks
the inode for needing an xfs_iput.  In addition to the cleaner interface
to the caller this also simplifies the implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-07-26 13:16:36 -05:00
Christoph Hellwig 3400777ff0 xfs: remove unneeded #include statements
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2010-07-26 13:16:33 -05:00
Christoph Hellwig 288699feca xfs: drop dmapi hooks
Dmapi support was never merged upstream, but we still have a lot of hooks
bloating XFS for it, all over the fast pathes of the filesystem.

This patch drops over 700 lines of dmapi overhead.  If we'll ever get HSM
support in mainline at least the namespace events can be done much saner
in the VFS instead of the individual filesystem, so it's not like this
is much help for future work.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-07-26 13:16:33 -05:00
Christoph Hellwig 0cadda1c5f xfs: remove duplicate buffer flags
Currently we define aliases for the buffer flags in various
namespaces, which only adds confusion.  Remove all but the XBF_
flags to clean this up a bit.

Note that we still abuse XFS_B_ASYNC/XBF_ASYNC for some non-buffer
uses, but I'll clean that up later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-21 13:44:36 -06:00
Dave Chinner a9273ca5c6 xfs: convert attr to use unsigned names
To be consistent with the directory code, the attr code should use
unsigned names. Convert the names from the vfs at the highest level
to unsigned, and ænsure they are consistenly used as unsigned down
to disk.

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-01-20 10:47:48 +11:00
Eric Sandeen 5d77c0dc0c xfs: make several more functions static
Just minor housekeeping, a lot more functions can be trivially made
static; others could if we reordered things a bit...

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-15 15:31:38 -06:00
Christoph Hellwig 0b1b213fcf xfs: event tracing support
Convert the old xfs tracing support that could only be used with the
out of tree kdb and xfsidbg patches to use the generic event tracer.

To use it make sure CONFIG_EVENT_TRACING is enabled and then enable
all xfs trace channels by:

   echo 1 > /sys/kernel/debug/tracing/events/xfs/enable

or alternatively enable single events by just doing the same in one
event subdirectory, e.g.

   echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable

or set more complex filters, etc. In Documentation/trace/events.txt
all this is desctribed in more detail.  To reads the events do a

   cat /sys/kernel/debug/tracing/trace

Compared to the last posting this patch converts the tracing mostly to
the one tracepoint per callsite model that other users of the new
tracing facility also employ.  This allows a very fine-grained control
of the tracing, a cleaner output of the traces and also enables the
perf tool to use each tracepoint as a virtual performance counter,
     allowing us to e.g. count how often certain workloads git various
     spots in XFS.  Take a look at

    http://lwn.net/Articles/346470/

for some examples.

Also the btree tracing isn't included at all yet, as it will require
additional core tracing features not in mainline yet, I plan to
deliver it later.

And the really nice thing about this patch is that it actually removes
many lines of code while adding this nice functionality:

 fs/xfs/Makefile                |    8
 fs/xfs/linux-2.6/xfs_acl.c     |    1
 fs/xfs/linux-2.6/xfs_aops.c    |   52 -
 fs/xfs/linux-2.6/xfs_aops.h    |    2
 fs/xfs/linux-2.6/xfs_buf.c     |  117 +--
 fs/xfs/linux-2.6/xfs_buf.h     |   33
 fs/xfs/linux-2.6/xfs_fs_subr.c |    3
 fs/xfs/linux-2.6/xfs_ioctl.c   |    1
 fs/xfs/linux-2.6/xfs_ioctl32.c |    1
 fs/xfs/linux-2.6/xfs_iops.c    |    1
 fs/xfs/linux-2.6/xfs_linux.h   |    1
 fs/xfs/linux-2.6/xfs_lrw.c     |   87 --
 fs/xfs/linux-2.6/xfs_lrw.h     |   45 -
 fs/xfs/linux-2.6/xfs_super.c   |  104 ---
 fs/xfs/linux-2.6/xfs_super.h   |    7
 fs/xfs/linux-2.6/xfs_sync.c    |    1
 fs/xfs/linux-2.6/xfs_trace.c   |   75 ++
 fs/xfs/linux-2.6/xfs_trace.h   | 1369 +++++++++++++++++++++++++++++++++++++++++
 fs/xfs/linux-2.6/xfs_vnode.h   |    4
 fs/xfs/quota/xfs_dquot.c       |  110 ---
 fs/xfs/quota/xfs_dquot.h       |   21
 fs/xfs/quota/xfs_qm.c          |   40 -
 fs/xfs/quota/xfs_qm_syscalls.c |    4
 fs/xfs/support/ktrace.c        |  323 ---------
 fs/xfs/support/ktrace.h        |   85 --
 fs/xfs/xfs.h                   |   16
 fs/xfs/xfs_ag.h                |   14
 fs/xfs/xfs_alloc.c             |  230 +-----
 fs/xfs/xfs_alloc.h             |   27
 fs/xfs/xfs_alloc_btree.c       |    1
 fs/xfs/xfs_attr.c              |  107 ---
 fs/xfs/xfs_attr.h              |   10
 fs/xfs/xfs_attr_leaf.c         |   14
 fs/xfs/xfs_attr_sf.h           |   40 -
 fs/xfs/xfs_bmap.c              |  507 +++------------
 fs/xfs/xfs_bmap.h              |   49 -
 fs/xfs/xfs_bmap_btree.c        |    6
 fs/xfs/xfs_btree.c             |    5
 fs/xfs/xfs_btree_trace.h       |   17
 fs/xfs/xfs_buf_item.c          |   87 --
 fs/xfs/xfs_buf_item.h          |   20
 fs/xfs/xfs_da_btree.c          |    3
 fs/xfs/xfs_da_btree.h          |    7
 fs/xfs/xfs_dfrag.c             |    2
 fs/xfs/xfs_dir2.c              |    8
 fs/xfs/xfs_dir2_block.c        |   20
 fs/xfs/xfs_dir2_leaf.c         |   21
 fs/xfs/xfs_dir2_node.c         |   27
 fs/xfs/xfs_dir2_sf.c           |   26
 fs/xfs/xfs_dir2_trace.c        |  216 ------
 fs/xfs/xfs_dir2_trace.h        |   72 --
 fs/xfs/xfs_filestream.c        |    8
 fs/xfs/xfs_fsops.c             |    2
 fs/xfs/xfs_iget.c              |  111 ---
 fs/xfs/xfs_inode.c             |   67 --
 fs/xfs/xfs_inode.h             |   76 --
 fs/xfs/xfs_inode_item.c        |    5
 fs/xfs/xfs_iomap.c             |   85 --
 fs/xfs/xfs_iomap.h             |    8
 fs/xfs/xfs_log.c               |  181 +----
 fs/xfs/xfs_log_priv.h          |   20
 fs/xfs/xfs_log_recover.c       |    1
 fs/xfs/xfs_mount.c             |    2
 fs/xfs/xfs_quota.h             |    8
 fs/xfs/xfs_rename.c            |    1
 fs/xfs/xfs_rtalloc.c           |    1
 fs/xfs/xfs_rw.c                |    3
 fs/xfs/xfs_trans.h             |   47 +
 fs/xfs/xfs_trans_buf.c         |   62 -
 fs/xfs/xfs_vnodeops.c          |    8
 70 files changed, 2151 insertions(+), 2592 deletions(-)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-14 23:08:16 -06:00
Christoph Hellwig e82fa0c7ca xfs: rename xfs_attr_fetch to xfs_attr_get_int
Using a totally different name for the low-level get operation does
not fit the _int convention used in the rest of the attr code, so
rename it.

While we're at it also fix the prototype to use the normal convention
and mark it static as it's never used outside of xfs_attr.c.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11 15:11:22 -06:00
Christoph Hellwig 6ad112bfb5 xfs: simplify xfs_buf_get / xfs_buf_read interfaces
Currently the low-level buffer cache interfaces are highly confusing
as we have a _flags variant of each that does actually respect the
flags, and one without _flags which has a flags argument that gets
ignored and overriden with a default set.  Given that very few places
use the default arguments get rid of the duplication and convert all
callers to pass the flags explicitly.  Also remove the now confusing
_flags postfix.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11 15:11:21 -06:00
Christoph Hellwig ddd3a14e0f xfs: switch to NOFS allocation under i_lock in xfs_attr_rmtval_get
xfs_attr_rmtval_get is always called with i_lock held, but i_lock is taken
in reclaim context so all allocations under it must avoid recursions into
the filesystem.

Reported by the new reclaim context tracing in lockdep.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
2009-08-12 01:08:01 -05:00
Christoph Hellwig 10746e47e7 xfs: switch to NOFS allocation under i_lock in xfs_attr_rmtval_set
xfs_attr_rmtval_set is always called with i_lock held, and i_lock is taken
in reclaim context so all allocations under it must avoid recursions into
the filesystem.

Reported by the new reclaim context tracing in lockdep.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
2009-08-12 01:07:44 -05:00
Christoph Hellwig ef14f0c157 xfs: use generic Posix ACL code
This patch rips out the XFS ACL handling code and uses the generic
fs/posix_acl.c code instead.  The ondisk format is of course left
unchanged.

This also introduces the same ACL caching all other Linux filesystems do
by adding pointers to the acl and default acl in struct xfs_inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-10 17:07:47 +02:00
Christoph Hellwig 7d095257e3 xfs: kill xfs_qmops
Kill the quota ops function vector and replace it with direct calls or
stubs in the CONFIG_XFS_QUOTA=n case.

Make sure we check XFS_IS_QUOTA_RUNNING in the right spots.  We can remove
the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set
otherwise.

This brings us back closer to the way this code worked in IRIX and earlier
Linux versions, but we keep a lot of the more useful factoring of common
code.

Eventually we should also kill xfs_qm_bhv.c, but that's left for a later
patch.

Reduces the size of the source code by about 250 lines and the size of
XFS module by about 1.5 kilobytes with quotas enabled:

   text	   data	    bss	    dec	    hex	filename
 615957	   2960	   3848	 622765	  980ad	fs/xfs/xfs.o
 617231	   3152	   3848	 624231	  98667	fs/xfs/xfs.o.old

Fallout:

 - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects
   the inode locked and xfs_qm_dqattach which does the locking around it,
   thus removing XFS_QMOPT_ILOCKED.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 15:33:32 +02:00
Eric Sandeen 9d87c3192d [XFS] Remove the rest of the macro-to-function indirections.
Remove the last of the macros-defined-to-static-functions.

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2009-01-16 17:10:42 +11:00
Niv Sardi 322ff6b8cd [XFS] Move xfs_attr_rolltrans to xfs_trans_roll
Move it from the attr code to the transaction code and make
the attr code call the new function.

We rolltrans is really usefull whenever we want to use rolling
transaction, should be generic, it isn't dependent on any part
of the attr code anyway.

We use this excuse to change all the:

if ((error = xfs_attr_rolltrans()))

calls into:

error = xfs_trans_roll();

if (error)

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31729a

Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:05:49 +10:00
Niv Sardi 5e9da7b7a1 [XFS] Move attr log alloc size calculator to another function.
We will need that to be able to calculate the size of log we need for a
specific attr (for Create+EA). The local flag is needed so that we can
fail if we run into ENOSPC when trying to alloc blocks.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31727a

Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:03:35 +10:00
Christoph Hellwig ad9b463aa2 [XFS] Switches xfs_vn_listxattr to set it's put_listent callback directly
and not go through xfs_attr_list.

SGI-PV: 983395

SGI-Modid: xfs-linux-melb:xfs-kern:31324a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28 16:58:53 +10:00
Christoph Hellwig caf8aabdbc [XFS] Factor out code for whether inode has attributes or not.
SGI-PV: 983394

SGI-Modid: xfs-linux-melb:xfs-kern:31323a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28 16:58:52 +10:00
Lachlan McIlroy 0ec585163a [XFS] Use the generic xattr methods.
Use the generic set, get and removexattr methods and supply the s_xattr
array with fine-grained handlers. All XFS/Linux highlevel attr handling is
rewritten from scratch and placed into fs/xfs/linux-2.6/xfs_xattr.c so
that it's separated from the generic low-level code.

SGI-PV: 982343

SGI-Modid: xfs-linux-melb:xfs-kern:31234a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28 16:58:49 +10:00
Barry Naujok 6a178100ab [XFS] Add op_flags field and helpers to xfs_da_args
The end of the xfs_da_args structure has 4 unsigned char fields for
true/false information on directory and attr operations using the
xfs_da_args structure.

The following converts these 4 into a op_flags field that uses the first 4
bits for these fields and allows expansion for future operation
information (eg. case-insensitive lookup request).

SGI-PV: 981520
SGI-Modid: xfs-linux-melb:xfs-kern:31206a

Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-07-28 16:58:37 +10:00
Eric Sandeen 68f34d5107 [XFS]
de-duplicate calls to xfs_attr_trace_enter

Every call to xfs_attr_trace_enter() shares the exact same 16 args in the
middle... just send in the context pointer and let the next level down
split it into the ktrace.

Compile tested only.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:31200a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28 16:58:35 +10:00
Christoph Hellwig 911ee3de3d [XFS] Kill attr_capable checks as already done in xattr_permission.
No need for addition permission checks in the xattr handler,
fs/xattr.c:xattr_permission() already does them, and in fact slightly more
strict then what was in the attr_capable handlers.

SGI-PV: 981809
SGI-Modid: xfs-linux-melb:xfs-kern:31164a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28 16:58:13 +10:00
Barry Naujok e8b0ebaa11 [XFS] Cleanup xfs_attr a bit with xfs_name and remove cred
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30913a

Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29 15:54:55 +10:00
Eric Sandeen f7d3c34788 [XFS] Remove CONFIG_XFS_SECURITY.
There is no point to the CONFIG_XFS_SECURITY option; it disables the
ability to set security attributes at runtime, but it does not actually
slim down or remove any code for runtime. Just remove it and always allow
security attributes to be set.

SGI-PV: 980310
SGI-Modid: xfs-linux-melb:xfs-kern:30877a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 12:04:19 +10:00
David Chinner a8272ce0c1 [XFS] Fix up sparse warnings.
These are mostly locking annotations, marking things static, casts where
needed and declaring stuff in header files.

SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30002a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07 18:14:38 +11:00
Christoph Hellwig 739bfb2a7d [XFS] call common xfs vnode-level helpers directly and remove vnode operations
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29493a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 10:40:00 +10:00
Christoph Hellwig 993386c19a [XFS] decontaminate vnode operations from behavior details
All vnode ops now take struct xfs_inode pointers and the behaviour related
glue is split out into methods of it's own. This required fixing
xfs_create/mkdir/symlink to not mess with the inode pointer but rather use
a separate boolean for error handling. Thanks to Dave Chinner for that
fix.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29492a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-15 16:54:29 +10:00
Eric Sandeen 1c72bf9003 [XFS] The last argument "lsn" of xfs_trans_commit() is always called with
NULL.

Patch provided by Eric Sandeen.

SGI-PV: 961693
SGI-Modid: xfs-linux-melb:xfs-kern:28199a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08 13:48:42 +10:00
Eric Sandeen f7c99b6fc7 [XFS] Remove unused argument to xfs_bmap_finish
The firstblock argument to xfs_bmap_finish is not used by that function.
Remove it and cleanup the code a bit.

Patch provided by Eric Sandeen.

SGI-PV: 960196
SGI-Modid: xfs-linux-melb:xfs-kern:28034a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10 18:37:16 +11:00
Barry Naujok e5889e90dd [XFS] Fix attr2 corruption with btree data extents
SGI-PV: 958747
SGI-Modid: xfs-linux-melb:xfs-kern:27792a

Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Russell Cattelan <cattelan@thebarn.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10 18:35:58 +11:00
David Chinner 7989cb8ef5 [XFS] Keep stack usage down for 4k stacks by using noinline.
gcc-4.1 and more recent aggressively inline static functions which
increases XFS stack usage by ~15% in critical paths. Prevent this from
occurring by adding noinline to the STATIC definition.

Also uninline some functions that are too large to be inlined and were
causing problems with CONFIG_FORCED_INLINING=y.

Finally, clean up all the different users of inline, __inline and
__inline__ and put them under one STATIC_INLINE macro. For debug kernels
the STATIC_INLINE macro uninlines those functions.

SGI-PV: 957159
SGI-Modid: xfs-linux-melb:xfs-kern:27585a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: David Chatterton <chatz@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10 18:34:56 +11:00
Tim Shimmin 726801ba06 [XFS] Add EA list callbacks for xfs kernel use. Cleanup some namespace
code.

SGI-PV: 954372
SGI-Modid: xfs-linux-melb:xfs-kern:26583a

Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-09-28 11:01:37 +10:00
Nathan Scott f6c2d1fa63 [XFS] Remove version 1 directory code. Never functioned on Linux, just
pure bloat.

SGI-PV: 952969
SGI-Modid: xfs-linux-melb:xfs-kern:26251a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-20 13:04:51 +10:00
Nathan Scott 67fcaa73ad [XFS] Resolve a namespace collision on vnode/vnodeops for FreeBSD porters.
SGI-PV: 953338
SGI-Modid: xfs-linux-melb:xfs-kern:26107a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 17:00:52 +10:00
Olaf Weber 3e57ecf640 [XFS] Add parameters to xfs_bmapi() and xfs_bunmapi() to have them report
the range spanned by modifications to the in-core extent map.  Add
XFS_BUNMAPI() and XFS_SWAP_EXTENTS() macros that call xfs_bunmapi() and
xfs_swap_extents() via the ioops vector. Change all calls that may modify
the in-core extent map for the data fork to go through the ioops vector. 
This allows a cache of extent map data to be kept in sync.

SGI-PV: 947615
SGI-Modid: xfs-linux-melb:xfs-kern:209226a

Signed-off-by: Olaf Weber <olaf@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 14:48:12 +10:00
Nathan Scott c41564b5af [XFS] We really suck at spulling. Thanks to Chris Pascoe for fixing all
these typos.

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:25539a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-29 08:55:14 +10:00
Nathan Scott fac80cce0e [XFS] endianess annotations for xfs_da_node_hdr_t
SGI-PV: 943272
SGI-Modid: xfs-linux-melb:xfs-kern:25505a

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-17 17:29:56 +11:00
Nathan Scott 403432dcb5 [XFS] endianess annotations for xfs_da_node_entry_t
SGI-PV: 943272
SGI-Modid: xfs-linux-melb:xfs-kern:25504a

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-17 17:29:46 +11:00
Nathan Scott 6b19f2d87d [XFS] endianess annotations for xfs_attr_leaf_entry_t
SGI-PV: 943272
SGI-Modid: xfs-linux-melb:xfs-kern:25498a

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-17 17:29:02 +11:00
Nathan Scott 918ae424e1 [XFS] endianess annotations for xfs_attr_leaf_hdr_t
SGI-PV: 943272
SGI-Modid: xfs-linux-melb:xfs-kern:25497a

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-17 17:28:54 +11:00
Nathan Scott 89da054424 [XFS] endianess annotations for xfs_da_blkinfo_t
SGI-PV: 943272
SGI-Modid: xfs-linux-melb:xfs-kern:25495a

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-17 17:28:40 +11:00
Nathan Scott ec86dc02fd [XFS] Complete transition away from linvfs naming convention, finally.
SGI-PV: 947038
SGI-Modid: xfs-linux-melb:xfs-kern:25474a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-17 17:25:36 +11:00
Randy Dunlap 16f7e0fe2e [PATCH] capable/capability.h (fs/)
fs: Use <linux/capability.h> where capable() is used.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:13 -08:00