Commit Graph

71 Commits

Author SHA1 Message Date
Bob Liu 35fe2e73bf blackfin: update defconfig for bf527-ezkit
To fix compile error:
drivers/usb/musb/blackfin.h:51:3: error: #error "Please use PIO mode in MUSB
driver on bf52x chip v0.0 and v0.1"
make[4]: *** [drivers/usb/musb/blackfin.o] Error 1

Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-04-06 10:25:03 +08:00
Bob Liu 45a93315d8 arch: blackfin: udpate defconfig
choose musb by default for bf527 and bf548.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-03-21 11:00:09 +08:00
Bob Liu ff4db3b14c blackfin: update default defconfig
Update default defconfig by selecting correct net device driver.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-03-21 11:00:08 +08:00
Scott Jiang 5ef835ebf9 blackfin: config: update def config for all boards
Config name for spi controller driver has been modified in previous commit,
so update default config accordingly.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-01-09 10:26:15 +08:00
Sonic Zhang f8b4392091 Blackfin: bf548-ezkit: update defconfig
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-25 19:51:32 -04:00
Mike Frysinger 4e12b08b72 Blackfin: bf561-ezkit: change parallel flash from M to Y in defconfig
These flashes are always on the board, so might as well enable them by
default rather than a module.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:17 -04:00
Wanlong Gao c7cbb02222 rtc: fix build warnings in defconfigs
RTC_CLASS is changed to bool, so 'm' is invalid.

Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-15 20:04:02 -07:00
Mike Frysinger f91c69168a Blackfin: bf533-stamp/bf537-stamp: drop ad1980 from defconfigs
These boards don't have AD1980 modules, and that device is deprecated,
so don't bother building it up by default anymore.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger 3f62bcb259 Blackfin: bf527-ezkit: tweak sound defconfig
Build the sound pieces that the board actually has into the kernel, and
punt older devices that we discourage.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger 901c23fb18 Blackfin: defconfigs: update after misc devices defaulted to N
The default value for misc devices was changed from Y to N which
causes problems for mini defconfigs that were relying on this
defaulting to Y.  So update all of the defconfigs accordingly.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-25 16:54:12 -04:00
Mike Frysinger d6b435be4b Blackfin: ADI boards: enable pseudo debug insns support
We use these insns when testing, so enable them by default for all
of our development boards.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 03:49:26 -04:00
David Rientjes 6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Andreas Schallenberg 3ea9f2bf5a Blackfin: DNP5370: new board port
Signed-off-by: Andreas Schallenberg <Andreas.Schallenberg@3alitydigital.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:25 -05:00
Mike Frysinger c31b3f7385 Blackfin: bf561-ezkit: add SMP defconfig
Since the SMP code paths tend to compile fail a lot, start a SMP defconfig
so our nightly build tools will automatically test it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:07 -05:00
Mike Frysinger 10cbb0ba42 Blackfin: update defconfigs
- enable pm for ADI boards
- drop security option as no one uses it
- enable uninitialized mmap for everyone
- disable wireless by default as no one uses it
- disable cfq io sched as noop is fine

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25 04:54:33 -04:00
Ashish Gupta e5c1721894 Blackfin: tll6527m: new board port
Signed-off-by: Ashish Gupta <asg@thelearninglabs.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:29:58 -04:00
Michael Hennerich 8effc4a68b Blackfin: ad7160eval: new board port
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:51 -04:00
Sam Ravnborg 8b1bb90701 defconfig reduction
Use the defconfig files generated by "make savedefconfig" for
remaining defconfig files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-14 22:26:53 +02:00
Mike Frysinger bad6b094ad Blackfin: update defconfigs
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:58 -04:00
Harald Krapfenbauer 5aff1642ae Blackfin: tcm-bf518: new board port
Signed-off-by: Harald Krapfenbauer <harald.krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Sonic Zhang 0ea19c64e3 Blackfin: update defconfigs
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:47 -05:00
Michael Hennerich 6924dfb058 Blackfin: bf527-ezkit: add support for V2.1 boards
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Valentin Yakovenkov ab843c7940 Blackfin: add support for the Acvilon BF561 board
Signed-off-by: Valentin Yakovenkov <yakovenkov@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:10 -05:00
Mike Frysinger 3a022ba9ac Blackfin: update defconfigs
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:37 -05:00
Sonic Zhang 88c28b2df9 Blackfin: increase default async timings for parallel flashes
The default async timings are a little too fast for the parallel flash
that is attached by default to the async banks.  So slow things down a bit
so accessing the hardware is stable.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:42 -04:00
Mike Frysinger 841a534367 Blackfin: update defconfigs
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:16:01 -04:00
Sonic Zhang b9ccf14bc5 Blackfin: update defconfigs
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-06-12 06:11:23 -04:00
Sonic Zhang a66648756f Blackfin arch: update default kernel configuration
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-28 23:46:17 +08:00
Mike Frysinger 4aad7ec373 Blackfin arch: disable legacy /proc/scsi/ support by default
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-06 00:27:17 +08:00
Graf Yang 5047607f01 Blackfin arch: update default kernel config, select KSZ8893M driver for BF518
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05 17:32:41 +08:00
Michael Hennerich 8bf6774d7f Blackfin arch: Enable Write Back Cache on all Blackfin Boards
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-04 11:34:10 +08:00
Sonic Zhang 28e4cf22a3 Blackfin arch: Disable NAND option by default
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-02 18:04:24 +08:00
Michael Hennerich dfd700baf2 Blackfin arch: Update CM-BF527 kernel config
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger 583947c6bc Blackfin arch: build jtag tty driver as a module by default
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Sonic Zhang c6bbd8ac54 Blackfin arch: enable bfin_eth in bf51x by default
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Jean Delvare dd7f8dbe2b eeprom: More consistent symbol names
Now that all EEPROM drivers live in the same place, let's harmonize
their symbol names.

Also fix eeprom's dependencies, it definitely needs sysfs, and is no
longer experimental after many years in the kernel tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-01-26 21:19:57 +01:00
Sonic Zhang d64bc118d3 Blackfin arch: update board default configs
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Yi Li 6a01f23033 Blackfin arch: merge adeos blackfin part to arch/blackfin/
[Mike Frysinger <vapier.adi@gmail.com>:
 - handle bf531/bf532/bf534/bf536 variants in ipipe.h
 - cleanup IPIPE logic for bfin_set_irq_handler()
 - cleanup ipipe asm code a bit and add missing ENDPROC()
 - simplify IPIPE code in trap_c
 - unify some of the IPIPE code and fix style
 - simplify DO_IRQ_L1 handling with ipipe code
 - revert IRQ_SW_INT# addition from ipipe merge
 - remove duplicate get_{c,s}clk() prototypes
]

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Mike Frysinger 98946574a4 Blackfin arch: enable DEBUG_KERNEL for ADI boards
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:38 +08:00
Mike Frysinger f768a0eb90 Blackfin arch: Set TWI/I2C Clock to 100kHz
All slaves I'm aware of should support at least 100kHz

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Yi Li 0c720da35c Blackfin arch: Retire old spi_mmc driver
Turn to use the mmc_spi driver in mainline kernel.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Mike Frysinger 2de73e71c2 Blackfin arch: use physmap in board resources rather than legacy config method
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 17:48:22 +08:00
Mike Frysinger 57a55077dd Blackfin arch: update defconfig file for all boards
- do not bother generating deprecated /sys files by default now since
   mdev does not need it
 - Don't built-in char sport driver and build it as a module in defconfig
 - disable CONFIG_DEVKMEM by default
 - enable spi flash driver on boards that have one
 - switch config to the NAND platfrom driver rather than the bfin async one
 - do not make BFIN_DMA_5XX optional since a large portion of our code relies
   on dma functions existing

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 17:48:22 +08:00
Bryan Wu 2f6f4bcdd6 Blackfin arch: add support for Blackfin latest processor family BF51x
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 17:48:21 +08:00
Michael Hennerich dc26aec25d Blackfin arch: BF538/9 Linux kernel Support
Add supporing for Blackfin BF538 and BF539 processors.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 17:48:22 +08:00
Mike Frysinger ed061b7ac8 Blackfin arch: disable CONFIG_HW_RANDOM and CONFIG_DAB in defconfig files
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-16 23:54:43 +08:00
Mike Frysinger f5623a3cf2 Blackfin arch: update board defconfigs
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-10 17:51:15 +08:00
Michael Hennerich 8cc7117e7c Blackfin arch: Add new board support for ADZS-BF526-EZ-BRD
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-13 14:45:06 +08:00
Benjamin Matthews 130de7cebe Blackfin arch: add support for the BlackStamp board
Signed-off-by: Benjamin Matthews <bmat@lle.rochester.edu>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-14 14:55:54 +08:00
Mike Frysinger b9da3b9240 Blackfin arch: add support for board tcm-bf537
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-13 15:49:35 +08:00