This patch add VMX primitives to do memcmp() in case the compare size
is equal or greater than 4K bytes. KSM feature can benefit from this.
Test result with following test program(replace the "^>" with ""):
------
># cat tools/testing/selftests/powerpc/stringloops/memcmp.c
>#include <malloc.h>
>#include <stdlib.h>
>#include <string.h>
>#include <time.h>
>#include "utils.h"
>#define SIZE (1024 * 1024 * 900)
>#define ITERATIONS 40
int test_memcmp(const void *s1, const void *s2, size_t n);
static int testcase(void)
{
char *s1;
char *s2;
unsigned long i;
s1 = memalign(128, SIZE);
if (!s1) {
perror("memalign");
exit(1);
}
s2 = memalign(128, SIZE);
if (!s2) {
perror("memalign");
exit(1);
}
for (i = 0; i < SIZE; i++) {
s1[i] = i & 0xff;
s2[i] = i & 0xff;
}
for (i = 0; i < ITERATIONS; i++) {
int ret = test_memcmp(s1, s2, SIZE);
if (ret) {
printf("return %d at[%ld]! should have returned zero\n", ret, i);
abort();
}
}
return 0;
}
int main(void)
{
return test_harness(testcase, "memcmp");
}
------
Without this patch (but with the first patch "powerpc/64: Align bytes
before fall back to .Lshort in powerpc64 memcmp()." in the series):
4.726728762 seconds time elapsed ( +- 3.54%)
With VMX patch:
4.234335473 seconds time elapsed ( +- 2.63%)
There is ~+10% improvement.
Testing with unaligned and different offset version (make s1 and s2 shift
random offset within 16 bytes) can archieve higher improvement than 10%..
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently memcmp() 64bytes version in powerpc will fall back to .Lshort
(compare per byte mode) if either src or dst address is not 8 bytes aligned.
It can be opmitized in 2 situations:
1) if both addresses are with the same offset with 8 bytes boundary:
memcmp() can compare the unaligned bytes within 8 bytes boundary firstly
and then compare the rest 8-bytes-aligned content with .Llong mode.
2) If src/dst addrs are not with the same offset of 8 bytes boundary:
memcmp() can align src addr with 8 bytes, increment dst addr accordingly,
then load src with aligned mode and load dst with unaligned mode.
This patch optmizes memcmp() behavior in the above 2 situations.
Tested with both little/big endian. Performance result below is based on
little endian.
Following is the test result with src/dst having the same offset case:
(a similar result was observed when src/dst having different offset):
(1) 256 bytes
Test with the existing tools/testing/selftests/powerpc/stringloops/memcmp:
- without patch
29.773018302 seconds time elapsed ( +- 0.09% )
- with patch
16.485568173 seconds time elapsed ( +- 0.02% )
-> There is ~+80% percent improvement
(2) 32 bytes
To observe performance impact on < 32 bytes, modify
tools/testing/selftests/powerpc/stringloops/memcmp.c with following:
-------
#include <string.h>
#include "utils.h"
-#define SIZE 256
+#define SIZE 32
#define ITERATIONS 10000
int test_memcmp(const void *s1, const void *s2, size_t n);
--------
- Without patch
0.244746482 seconds time elapsed ( +- 0.36%)
- with patch
0.215069477 seconds time elapsed ( +- 0.51%)
-> There is ～+13% improvement
(3) 0~8 bytes
To observe <8 bytes performance impact, modify
tools/testing/selftests/powerpc/stringloops/memcmp.c with following:
-------
#include <string.h>
#include "utils.h"
-#define SIZE 256
-#define ITERATIONS 10000
+#define SIZE 8
+#define ITERATIONS 1000000
int test_memcmp(const void *s1, const void *s2, size_t n);
-------
- Without patch
1.845642503 seconds time elapsed ( +- 0.12% )
- With patch
1.849767135 seconds time elapsed ( +- 0.26% )
-> They are nearly the same. (-0.2%)
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Notable changes:
- Support for split PMD page table lock on 64-bit Book3S (Power8/9).
- Add support for HAVE_RELIABLE_STACKTRACE, so we properly support live
patching again.
- Add support for patching barrier_nospec in copy_from_user() and syscall entry.
- A couple of fixes for our data breakpoints on Book3S.
- A series from Nick optimising TLB/mm handling with the Radix MMU.
- Numerous small cleanups to squash sparse/gcc warnings from Mathieu Malaterre.
- Several series optimising various parts of the 32-bit code from Christophe Leroy.
- Removal of support for two old machines, "SBC834xE" and "C2K" ("GEFanuc,C2K"),
which is why the diffstat has so many deletions.
And many other small improvements & fixes.
There's a few out-of-area changes. Some minor ftrace changes OK'ed by Steve, and
a fix to our powernv cpuidle driver. Then there's a series touching mm, x86 and
fs/proc/task_mmu.c, which cleans up some details around pkey support. It was
ack'ed/reviewed by Ingo & Dave and has been in next for several weeks.
Thanks to:
Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al Viro, Andrew
Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Balbir Singh,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Dave
Hansen, Fabio Estevam, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Haren
Myneni, Hari Bathini, Ingo Molnar, Jonathan Neuschäfer, Josh Poimboeuf,
Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu
Malaterre, Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica Gupta, Ravi
Bangoria, Russell Currey, Sam Bobroff, Samuel Mendoza-Jonas, Segher
Boessenkool, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stewart Smith,
Thiago Jung Bauermann, Torsten Duwe, Vaibhav Jain, Wei Yongjun, Wolfram Sang,
Yisheng Xie, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=ZlBf
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Support for split PMD page table lock on 64-bit Book3S (Power8/9).
- Add support for HAVE_RELIABLE_STACKTRACE, so we properly support
live patching again.
- Add support for patching barrier_nospec in copy_from_user() and
syscall entry.
- A couple of fixes for our data breakpoints on Book3S.
- A series from Nick optimising TLB/mm handling with the Radix MMU.
- Numerous small cleanups to squash sparse/gcc warnings from Mathieu
Malaterre.
- Several series optimising various parts of the 32-bit code from
Christophe Leroy.
- Removal of support for two old machines, "SBC834xE" and "C2K"
("GEFanuc,C2K"), which is why the diffstat has so many deletions.
And many other small improvements & fixes.
There's a few out-of-area changes. Some minor ftrace changes OK'ed by
Steve, and a fix to our powernv cpuidle driver. Then there's a series
touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details
around pkey support. It was ack'ed/reviewed by Ingo & Dave and has
been in next for several weeks.
Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al
Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd
Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe
Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain,
Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo
Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal,
Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre,
Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica
Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel
Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo,
Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe,
Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing"
* tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits)
powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap
cpuidle: powernv: Fix promotion from snooze if next state disabled
powerpc: fix build failure by disabling attribute-alias warning in pci_32
ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait()
powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted"
powerpc: fix spelling mistake: "Usupported" -> "Unsupported"
powerpc/pkeys: Detach execute_only key on !PROT_EXEC
powerpc/powernv: copy/paste - Mask SO bit in CR
powerpc: Remove core support for Marvell mv64x60 hostbridges
powerpc/boot: Remove core support for Marvell mv64x60 hostbridges
powerpc/boot: Remove support for Marvell mv64x60 i2c controller
powerpc/boot: Remove support for Marvell MPSC serial controller
powerpc/embedded6xx: Remove C2K board support
powerpc/lib: optimise PPC32 memcmp
powerpc/lib: optimise 32 bits __clear_user()
powerpc/time: inline arch_vtime_task_switch()
powerpc/Makefile: set -mcpu=860 flag for the 8xx
powerpc: Implement csum_ipv6_magic in assembly
powerpc/32: Optimise __csum_partial()
powerpc/lib: Adjust .balign inside string functions for PPC32
...
At the time being, memcmp() compares two chunks of memory
byte per byte.
This patch optimises the comparison by comparing word by word.
On the same way as commit 15c2d45d17 ("powerpc: Add 64bit
optimised memcmp"), this patch moves memcmp() into a dedicated
file named memcmp_32.S
A small benchmark performed on an 8xx comparing two chuncks
of 512 bytes performed 100000 times gives:
Before : 5852274 TB ticks
After: 1488638 TB ticks
This is almost 4 times faster
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rewrite clear_user() on the same principle as memset(0), making use
of dcbz to clear complete cache lines.
This code is a copy/paste of memset(), with some modifications
in order to retrieve remaining number of bytes to be cleared,
as it needs to be returned in case of error.
On the same way as done on PPC64 in commit 17968fbbd1
("powerpc: 64bit optimised __clear_user"), the patch moves
__clear_user() into a dedicated file string_32.S
On a MPC885, throughput is almost doubled:
Before:
~# dd if=/dev/zero of=/dev/null bs=1M count=1000
1048576000 bytes (1000.0MB) copied, 18.990779 seconds, 52.7MB/s
After:
~# dd if=/dev/zero of=/dev/null bs=1M count=1000
1048576000 bytes (1000.0MB) copied, 9.611468 seconds, 104.0MB/s
On a MPC8321, throughput is multiplied by 2.12:
Before:
root@vgoippro:~# dd if=/dev/zero of=/dev/null bs=1M count=1000
1048576000 bytes (1000.0MB) copied, 6.844352 seconds, 146.1MB/s
After:
root@vgoippro:~# dd if=/dev/zero of=/dev/null bs=1M count=1000
1048576000 bytes (1000.0MB) copied, 3.218854 seconds, 310.7MB/s
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Improve __csum_partial by interleaving loads and adds.
On a 8xx, it brings neither improvement nor degradation.
On a 83xx, it brings a 25% improvement.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
commit 87a156fb18 ("Align hot loops of some string functions")
degraded the performance of string functions by adding useless
nops
A simple benchmark on an 8xx calling 100000x a memchr() that
matches the first byte runs in 41668 TB ticks before this patch
and in 35986 TB ticks after this patch. So this gives an
improvement of approx 10%
Another benchmark doing the same with a memchr() matching the 128th
byte runs in 1011365 TB ticks before this patch and 1005682 TB ticks
after this patch, so regardless on the number of loops, removing
those useless nops improves the test by 5683 TB ticks.
Fixes: 87a156fb18 ("Align hot loops of some string functions")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
emulate_step() tests are failing if VSX is not supported or disabled.
emulate_step_test: lxvd2x : FAIL
emulate_step_test: stxvd2x : FAIL
If !CPU_FTR_VSX, emulate_step() failure is expected and testcase should
PASS with a valid justification. After patch:
emulate_step_test: lxvd2x : PASS (!CPU_FTR_VSX)
emulate_step_test: stxvd2x : PASS (!CPU_FTR_VSX)
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
emulate_step() is not checking runtime VSX feature flag before
emulating an instruction. This is causing kernel crash when kernel
is compiled with CONFIG_VSX=y but running on a machine where VSX
is not supported or disabled. Ex, while running emulate_step tests
on P6 machine:
Oops: Exception in kernel mode, sig: 4 [#1]
NIP [c000000000095c24] .load_vsrn+0x28/0x54
LR [c000000000094bdc] .emulate_loadstore+0x167c/0x17b0
Call Trace:
0x40fe240c7ae147ae (unreliable)
.emulate_loadstore+0x167c/0x17b0
.emulate_step+0x25c/0x5bc
.test_lxvd2x_stxvd2x+0x64/0x154
.test_emulate_step+0x38/0x4c
.do_one_initcall+0x5c/0x2c0
.kernel_init_freeable+0x314/0x4cc
.kernel_init+0x24/0x160
.ret_from_kernel_thread+0x58/0xb4
With fix:
emulate_step_test: lxvd2x : FAIL
emulate_step_test: stxvd2x : FAIL
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Note that unlike RFI which is patched only in kernel the nospec state
reflects settings at the time the module was loaded.
Iterating all modules and re-patching every time the settings change
is not implemented.
Based on lwsync patching.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Based on the RFI patching. This is required to be able to disable the
speculation barrier.
Only one barrier type is supported and it does nothing when the
firmware does not enable it. Also re-patching modules is not supported
So the only meaningful thing that can be done is patching out the
speculation barrier at boot when the user says it is not wanted.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some functions prototypes were missing for the non-altivec code. Add the
missing prototypes in a new header file, fix warnings treated as errors
with W=1:
arch/powerpc/lib/xor_vmx_glue.c:18:6: error: no previous prototype for ‘xor_altivec_2’ [-Werror=missing-prototypes]
arch/powerpc/lib/xor_vmx_glue.c:29:6: error: no previous prototype for ‘xor_altivec_3’ [-Werror=missing-prototypes]
arch/powerpc/lib/xor_vmx_glue.c:40:6: error: no previous prototype for ‘xor_altivec_4’ [-Werror=missing-prototypes]
arch/powerpc/lib/xor_vmx_glue.c:52:6: error: no previous prototype for ‘xor_altivec_5’ [-Werror=missing-prototypes]
The prototypes were already present in <asm/xor.h> but this header file is
meant to be included after <include/linux/raid/xor.h>. Trying to re-use
<asm/xor.h> directly would lead to warnings such as:
arch/powerpc/include/asm/xor.h:39:15: error: variable ‘xor_block_altivec’ has initializer but incomplete type
Trying to re-use <asm/xor.h> after <include/linux/raid/xor.h> in
xor_vmx_glue.c would in turn trigger the following warnings:
include/asm-generic/xor.h:688:34: error: ‘xor_block_32regs’ defined but not used [-Werror=unused-variable]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On some CPUs we can prevent a vulnerability related to store-to-load
forwarding by preventing store forwarding between privilege domains,
by inserting a barrier in kernel entry and exit paths.
This is known to be the case on at least Power7, Power8 and Power9
powerpc CPUs.
Barriers must be inserted generally before the first load after moving
to a higher privilege, and after the last store before moving to a
lower privilege, HV and PR privilege transitions must be protected.
Barriers are added as patch sections, with all kernel/hypervisor entry
points patched, and the exit points to lower privilge levels patched
similarly to the RFI flush patching.
Firmware advertisement is not implemented yet, so CPU flush types
are hard coded.
Thanks to Michal Suchánek for bug fixes and review.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
My powerpc-linux-gnu-gcc v4.4.5 compiler can't build a 32-bit kernel
any more:
arch/powerpc/lib/sstep.c: In function 'do_popcnt':
arch/powerpc/lib/sstep.c:1068: error: integer constant is too large for 'long' type
arch/powerpc/lib/sstep.c:1069: error: integer constant is too large for 'long' type
arch/powerpc/lib/sstep.c:1069: error: integer constant is too large for 'long' type
arch/powerpc/lib/sstep.c:1070: error: integer constant is too large for 'long' type
arch/powerpc/lib/sstep.c:1079: error: integer constant is too large for 'long' type
arch/powerpc/lib/sstep.c: In function 'do_prty':
arch/powerpc/lib/sstep.c:1117: error: integer constant is too large for 'long' type
This file gets compiled with -std=gnu89 which means a constant can be
given the type 'long' even if it won't fit. Fix the errors with a 'ULL'
suffix on the relevant constants.
Fixes: 2c979c489f ("powerpc/lib/sstep: Add prty instruction emulation")
Fixes: dcbd19b48d ("powerpc/lib/sstep: Add popcnt instruction emulation")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a test of the relative branch patching logic in the alternate
section feature fixup code. This tests that if we branch past the last
instruction of the alternate section, the branch is not patched.
That's because the assembler will have created a branch that already
points to the first instruction after the patched section, which is
correct and needs no further patching.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We want this to remain the last test (because it's disabled by
default), so give it a non-numbered name so we don't have to renumber
it when adding new tests before it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The code patching code has always been a bit confused about whether
it's best to use void *, unsigned int *, char *, etc. to point to
instructions. In fact in the feature fixups tests we use both unsigned
int[] and u8[] in different places.
Unfortunately the tests that use unsigned int[] calculate the size of
the code blocks using subtraction of those unsigned int pointers, and
then pass the result to memcmp(). This means we're only comparing 1/4
of the bytes we need to, because we need to multiply by
sizeof(unsigned int) to get the number of *bytes*.
The result is that the tests do all the patching and then only compare
some of the resulting code, so patching bugs that only effect that
last 3/4 of the code could slip through undetected. It turns out that
hasn't been happening, although one test had a bad expected case (see
previous commit).
Fix it for now by multiplying the size by 4 in the affected functions.
Fixes: 362e7701fd ("powerpc: Add self-tests of the feature fixup code")
Epic-brown-paper-bag-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The expected case for this test was wrong, the source of the alternate
code sequence is:
FTR_SECTION_ELSE
2: or 2,2,2
PPC_LCMPI r3,1
beq 3f
blt 2b
b 3f
b 1b
ALT_FTR_SECTION_END(0, 1)
3: or 1,1,1
or 2,2,2
4: or 3,3,3
So when it's patched the '3' label should still be on the 'or 1,1,1',
and the 4 label is irrelevant and can be removed.
Fixes: 362e7701fd ("powerpc: Add self-tests of the feature fixup code")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we patch an alternate feature section, we have to adjust any
relative branches that branch out of the alternate section.
But currently we have a bug if we have a branch that points to past
the last instruction of the alternate section, eg:
FTR_SECTION_ELSE
1: b 2f
or 6,6,6
2:
ALT_FTR_SECTION_END(...)
nop
This will result in a relative branch at 1 with a target that equals
the end of the alternate section.
That branch does not need adjusting when it's moved to the non-else
location. Currently we do adjust it, resulting in a branch that goes
off into the link-time location of the else section, which is junk.
The fix is to not patch branches that have a target == end of the
alternate section.
Fixes: d20fe50a7b ("KVM: PPC: Book3S HV: Branch inside feature section")
Fixes: 9b1a735de6 ("powerpc: Add logic to patch alternative feature sections")
Cc: stable@vger.kernel.org # v2.6.27+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rather than override the machine type in .S code (which can hide wrong
or ambiguous code generation for the target), set the type to power4
for all assembly.
This also means we need to be careful not to build power4-only code
when we're not building for Book3S, such as the "power7" versions of
copyuser/page/memcpy.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix Book3E build, don't build the "power7" variants for non-Book3S]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the rfi-flush messages print 'Using <type> flush' for all
enabled_flush_types, but that is not necessarily true -- as now the
fallback flush is always enabled on pseries, but the fixup function
overwrites its nop/branch slot with other flush types, if available.
So, replace the 'Using <type> flush' messages with '<type> flush is
available'.
Also, print the patched flush types in the fixup function, so users
can know what is (not) being used (e.g., the slower, fallback flush,
or no flush type at all if flush is disabled via the debugfs switch).
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The inline keyword was not at the beginning of the function declaration.
Fix the following warning (treated as error in W=1):
arch/powerpc/lib/sstep.c:283:1: error: ‘inline’ is not at beginning of declaration
static int nokprobe_inline copy_mem_in(u8 *dest, unsigned long ea, int nb,
arch/powerpc/lib/sstep.c:388:1: error: ‘inline’ is not at beginning of declaration
static int nokprobe_inline copy_mem_out(u8 *dest, unsigned long ea, int nb,
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Merge our fixes branch from the 4.15 cycle.
Unusually the fixes branch saw some significant features merged,
notably the RFI flush patches, so we want the code in next to be
tested against that, to avoid any surprises when the two are merged.
There's also some other work on the panic handling that was reverted
in fixes and we now want to do properly in next, which would conflict.
And we also fix a few other minor merge conflicts.
feature fixups need to use patch_instruction() early in the boot,
even before the code is relocated to its final address, requiring
patch_instruction() to use PTRRELOC() in order to address data.
But feature fixups applies on code before it is set to read only,
even for modules. Therefore, feature fixups can use
raw_patch_instruction() instead.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
patch_instruction() uses almost the same sequence as
__patch_instruction()
This patch refactor it so that patch_instruction() uses
__patch_instruction() instead of duplicating code.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On some CPUs we can prevent the Meltdown vulnerability by flushing the
L1-D cache on exit from kernel to user mode, and from hypervisor to
guest.
This is known to be the case on at least Power7, Power8 and Power9. At
this time we do not know the status of the vulnerability on other CPUs
such as the 970 (Apple G5), pasemi CPUs (AmigaOne X1000) or Freescale
CPUs. As more information comes to light we can enable this, or other
mechanisms on those CPUs.
The vulnerability occurs when the load of an architecturally
inaccessible memory region (eg. userspace load of kernel memory) is
speculatively executed to the point where its result can influence the
address of a subsequent speculatively executed load.
In order for that to happen, the first load must hit in the L1,
because before the load is sent to the L2 the permission check is
performed. Therefore if no kernel addresses hit in the L1 the
vulnerability can not occur. We can ensure that is the case by
flushing the L1 whenever we return to userspace. Similarly for
hypervisor vs guest.
In order to flush the L1-D cache on exit, we add a section of nops at
each (h)rfi location that returns to a lower privileged context, and
patch that with some sequence. Newer firmwares are able to advertise
to us that there is a special nop instruction that flushes the L1-D.
If we do not see that advertised, we fall back to doing a displacement
flush in software.
For guest kernels we support migration between some CPU versions, and
different CPUs may use different flush instructions. So that we are
prepared to migrate to a machine with a different flush instruction
activated, we may have to patch more than one flush instruction at
boot if the hypervisor tells us to.
In the end this patch is mostly the work of Nicholas Piggin and
Michael Ellerman. However a cast of thousands contributed to analysis
of the issue, earlier versions of the patch, back ports testing etc.
Many thanks to all of them.
Tested-by: Jon Masters <jcm@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When attempting to load a livepatch module, I got the following error:
module_64: patch_module: Expect noop after relocate, got 3c820000
The error was triggered by the following code in
unregister_netdevice_queue():
14c: 00 00 00 48 b 14c <unregister_netdevice_queue+0x14c>
14c: R_PPC64_REL24 net_set_todo
150: 00 00 82 3c addis r4,r2,0
GCC didn't insert a nop after the branch to net_set_todo() because it's
a sibling call, so it never returns. The nop isn't needed after the
branch in that case.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-and-tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A small batch of fixes, about 50% tagged for stable and the rest for recently
merged code.
There's one more fix for the >128T handling on hash. Once a process had
requested a single mmap above 128T we would then always search above 128T. The
correct behaviour is to consider the hint address in isolation for each mmap
request.
Then a couple of fixes for the IMC PMU, a missing EXPORT_SYMBOL in VAS, a fix
for STRICT_KERNEL_RWX on 32-bit, and a fix to correctly identify P9 DD2.1 but in
code that is currently not used by default.
Thanks to:
Aneesh Kumar K.V, Christophe Leroy, Madhavan Srinivasan, Sukadev Bhattiprolu.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gv70
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A small batch of fixes, about 50% tagged for stable and the rest for
recently merged code.
There's one more fix for the >128T handling on hash. Once a process
had requested a single mmap above 128T we would then always search
above 128T. The correct behaviour is to consider the hint address in
isolation for each mmap request.
Then a couple of fixes for the IMC PMU, a missing EXPORT_SYMBOL in
VAS, a fix for STRICT_KERNEL_RWX on 32-bit, and a fix to correctly
identify P9 DD2.1 but in code that is currently not used by default.
Thanks to: Aneesh Kumar K.V, Christophe Leroy, Madhavan Srinivasan,
Sukadev Bhattiprolu"
* tag 'powerpc-4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Fix Power9 DD2.1 logic in DT CPU features
powerpc/perf: Fix IMC_MAX_PMU macro
powerpc/perf: Fix pmu_count to count only nest imc pmus
powerpc: Fix boot on BOOK3S_32 with CONFIG_STRICT_KERNEL_RWX
powerpc/perf/imc: Use cpu_to_node() not topology_physical_package_id()
powerpc/vas: Export chip_to_vas_id()
powerpc/64s/slice: Use addr limit when computing slice mask
On powerpc32, patch_instruction() is called by apply_feature_fixups()
which is called from early_init()
There is the following note in front of early_init():
* Note that the kernel may be running at an address which is different
* from the address that it was linked at, so we must use RELOC/PTRRELOC
* to access static data (including strings). -- paulus
Therefore, slab_is_available() cannot be called yet, and
text_poke_area must be addressed with PTRRELOC()
Fixes: 95902e6c88 ("powerpc/mm: Implement STRICT_KERNEL_RWX on PPC32")
Cc: stable@vger.kernel.org # v4.14+
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Non-highlights:
- Five fixes for the >128T address space handling, both to fix bugs in our
implementation and to bring the semantics exactly into line with x86.
Highlights:
- Support for a new OPAL call on bare metal machines which gives us a true NMI
(ie. is not masked by MSR[EE]=0) for debugging etc.
- Support for Power9 DD2 in the CXL driver.
- Improvements to machine check handling so that uncorrectable errors can be
reported into the generic memory_failure() machinery.
- Some fixes and improvements for VPHN, which is used under PowerVM to notify
the Linux partition of topology changes.
- Plumbing to enable TM (transactional memory) without suspend on some Power9
processors (PPC_FEATURE2_HTM_NO_SUSPEND).
- Support for emulating vector loads form cache-inhibited memory, on some
Power9 revisions.
- Disable the fast-endian switch "syscall" by default (behind a CONFIG), we
believe it has never had any users.
- A major rework of the API drivers use when initiating and waiting for long
running operations performed by OPAL firmware, and changes to the
powernv_flash driver to use the new API.
- Several fixes for the handling of FP/VMX/VSX while processes are using
transactional memory.
- Optimisations of TLB range flushes when using the radix MMU on Power9.
- Improvements to the VAS facility used to access coprocessors on Power9, and
related improvements to the way the NX crypto driver handles requests.
- Implementation of PMEM_API and UACCESS_FLUSHCACHE for 64-bit.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Allen Pais, Andrew Donnellan, Aneesh
Kumar K.V, Arnd Bergmann, Balbir Singh, Benjamin Herrenschmidt, Breno Leitao,
Christophe Leroy, Christophe Lombard, Cyril Bur, Frederic Barrat, Gautham R.
Shenoy, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo Romero, Haren
Myneni, Joel Stanley, Kamalesh Babulal, Kautuk Consul, Markus Elfring, Masami
Hiramatsu, Michael Bringmann, Michael Neuling, Michal Suchanek, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pedro Miraglia Franco de
Carvalho, Philippe Bergheaud, Sandipan Das, Seth Forshee, Shriya, Stephen
Rothwell, Stewart Smith, Sukadev Bhattiprolu, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, William A. Kennington III.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Rq81
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"A bit of a small release, I suspect in part due to me travelling for
KS. But my backlog of patches to review is smaller than usual, so I
think in part folks just didn't send as much this cycle.
Non-highlights:
- Five fixes for the >128T address space handling, both to fix bugs
in our implementation and to bring the semantics exactly into line
with x86.
Highlights:
- Support for a new OPAL call on bare metal machines which gives us a
true NMI (ie. is not masked by MSR[EE]=0) for debugging etc.
- Support for Power9 DD2 in the CXL driver.
- Improvements to machine check handling so that uncorrectable errors
can be reported into the generic memory_failure() machinery.
- Some fixes and improvements for VPHN, which is used under PowerVM
to notify the Linux partition of topology changes.
- Plumbing to enable TM (transactional memory) without suspend on
some Power9 processors (PPC_FEATURE2_HTM_NO_SUSPEND).
- Support for emulating vector loads form cache-inhibited memory, on
some Power9 revisions.
- Disable the fast-endian switch "syscall" by default (behind a
CONFIG), we believe it has never had any users.
- A major rework of the API drivers use when initiating and waiting
for long running operations performed by OPAL firmware, and changes
to the powernv_flash driver to use the new API.
- Several fixes for the handling of FP/VMX/VSX while processes are
using transactional memory.
- Optimisations of TLB range flushes when using the radix MMU on
Power9.
- Improvements to the VAS facility used to access coprocessors on
Power9, and related improvements to the way the NX crypto driver
handles requests.
- Implementation of PMEM_API and UACCESS_FLUSHCACHE for 64-bit.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Allen Pais, Andrew
Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Balbir Singh, Benjamin
Herrenschmidt, Breno Leitao, Christophe Leroy, Christophe Lombard,
Cyril Bur, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven,
Guilherme G. Piccoli, Gustavo Romero, Haren Myneni, Joel Stanley,
Kamalesh Babulal, Kautuk Consul, Markus Elfring, Masami Hiramatsu,
Michael Bringmann, Michael Neuling, Michal Suchanek, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pedro Miraglia
Franco de Carvalho, Philippe Bergheaud, Sandipan Das, Seth Forshee,
Shriya, Stephen Rothwell, Stewart Smith, Sukadev Bhattiprolu, Tyrel
Datwyler, Vaibhav Jain, Vaidyanathan Srinivasan, and William A.
Kennington III"
* tag 'powerpc-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (151 commits)
powerpc/64s: Fix Power9 DD2.0 workarounds by adding DD2.1 feature
powerpc/64s: Fix masking of SRR1 bits on instruction fault
powerpc/64s: mm_context.addr_limit is only used on hash
powerpc/64s/radix: Fix 128TB-512TB virtual address boundary case allocation
powerpc/64s/hash: Allow MAP_FIXED allocations to cross 128TB boundary
powerpc/64s/hash: Fix fork() with 512TB process address space
powerpc/64s/hash: Fix 128TB-512TB virtual address boundary case allocation
powerpc/64s/hash: Fix 512T hint detection to use >= 128T
powerpc: Fix DABR match on hash based systems
powerpc/signal: Properly handle return value from uprobe_deny_signal()
powerpc/fadump: use kstrtoint to handle sysfs store
powerpc/lib: Implement UACCESS_FLUSHCACHE API
powerpc/lib: Implement PMEM API
powerpc/powernv/npu: Don't explicitly flush nmmu tlb
powerpc/powernv/npu: Use flush_all_mm() instead of flush_tlb_mm()
powerpc/powernv/idle: Round up latency and residency values
powerpc/kprobes: refactor kprobe_lookup_name for safer string operations
powerpc/kprobes: Blacklist emulate_update_regs() from kprobes
powerpc/kprobes: Do not disable interrupts for optprobes and kprobes_on_ftrace
powerpc/kprobes: Disable preemption before invoking probe handler for optprobes
...
Implement the architecture specific portitions of the UACCESS_FLUSHCACHE
API. This provides functions for the copy_user_flushcache iterator that
ensure that when the copy is finished the destination buffer contains
a copy of the original and that the destination buffer is clean in the
processor caches.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Implement the architecture specific cache maintence functions that make
up the "PMEM API". Currently the writeback and invalidate functions
are the same since the function of the DCBST (data cache block store)
instruction is typically interpreted as "writeback to the point of
coherency" rather than to memory. As a result implementing the API
requires a full cache flush rather than just a cache write back. This
will probably change in the not-too-distant future.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 3cdfcbfd32 ("powerpc: Change analyse_instr so it doesn't
modify *regs") introduced emulate_update_regs() to perform part of what
emulate_step() was doing earlier. However, this function was not added
to the kprobes blacklist. Add it so as to prevent it from being probed.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We have some dependencies & conflicts between patches in fixes and
things to go in next, both in the radix TLB flush code and the IMC PMU
driver. So merge fixes into next.
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the GCC documentation, the behaviour of __builtin_clz()
and __builtin_clzl() is undefined if the value of the input argument
is zero. Without handling this special case, these builtins have been
used for emulating the following instructions:
* Count Leading Zeros Word (cntlzw[.])
* Count Leading Zeros Doubleword (cntlzd[.])
This fixes the emulated behaviour of these instructions by adding an
additional check for this special case.
Fixes: 3cdfcbfd32 ("powerpc: Change analyse_instr so it doesn't modify *regs")
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This fixes the emulated behaviour of existing fixed-point shift right
algebraic instructions that are supposed to set both the CA and CA32
bits of XER when running on a system that is compliant with POWER ISA
v3.0 independent of whether the system is executing in 32-bit mode or
64-bit mode. The following instructions are affected:
* Shift Right Algebraic Word Immediate (srawi[.])
* Shift Right Algebraic Word (sraw[.])
* Shift Right Algebraic Doubleword Immediate (sradi[.])
* Shift Right Algebraic Doubleword (srad[.])
Fixes: 0016a4cf55 ("powerpc: Emulate most Book I instructions in emulate_step()")
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are existing fixed-point arithmetic instructions that always set the
CA bit of XER to reflect the carry out of bit 0 in 64-bit mode and out of
bit 32 in 32-bit mode. In ISA v3.0, these instructions also always set the
CA32 bit of XER to reflect the carry out of bit 32.
This fixes the emulated behaviour of such instructions when running on a
system that is compliant with POWER ISA v3.0. The following instructions
are affected:
* Add Immediate Carrying (addic)
* Add Immediate Carrying and Record (addic.)
* Subtract From Immediate Carrying (subfic)
* Add Carrying (addc[.])
* Subtract From Carrying (subfc[.])
* Add Extended (adde[.])
* Subtract From Extended (subfe[.])
* Add to Minus One Extended (addme[.])
* Subtract From Minus One Extended (subfme[.])
* Add to Zero Extended (addze[.])
* Subtract From Zero Extended (subfze[.])
Fixes: 0016a4cf55 ("powerpc: Emulate most Book I instructions in emulate_step()")
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds definitions for the OV32 and CA32 bits of XER that
were introduced in POWER ISA v3.0. There are some existing
instructions that currently set the OV and CA bits based on
certain conditions.
The emulation behaviour of all these instructions needs to
be updated to set these new bits accordingly.
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
mullw should do a 32 bit signed multiply and create a 64 bit signed
result. It currently truncates the result to 32 bits.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
mcrf broke when we changed analyse_instr() to not modify the register
state. The instruction writes to the CR, so we need to store the result
in op->ccval, not op->val.
Fixes: 3cdfcbfd32 ("powerpc: Change analyse_instr so it doesn't modify *regs")
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
set_cr0() broke when we changed analyse_instr() to not modify the
register state. Instead of looking at regs->gpr[x] which has not
been updated yet, we need to look at op->val.
Fixes: 3cdfcbfd32 ("powerpc: Change analyse_instr so it doesn't modify *regs")
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 350779a29f ("powerpc: Handle most loads and stores in
instruction emulation code", 2017-08-30) changed the register usage
in get_vr and put_vr with the aim of leaving the register number in
r3 untouched on return. Unfortunately, r6 was not a good choice, as
the callers as of 350779a29f store a MSR value in r6. Then, in
commit c22435a5f3 ("powerpc: Emulate FP/vector/VSX loads/stores
correctly when regs not live", 2017-08-30), the saving and restoring
of the MSR got moved into get_vr and put_vr. Either way, the effect
is that we put a value in MSR that only has the 0x3f8 bits non-zero,
meaning that we are switching to 32-bit mode. That leads to a crash
like this:
Unable to handle kernel paging request for instruction fetch
Faulting instruction address: 0x0007bea0
Oops: Kernel access of bad area, sig: 11 [#12]
LE SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in: vmx_crypto binfmt_misc ip_tables x_tables autofs4 crc32c_vpmsum
CPU: 6 PID: 32659 Comm: trashy_testcase Tainted: G D 4.13.0-rc2-00313-gf3026f57e6ed-dirty #23
task: c000000f1bb9e780 task.stack: c000000f1ba98000
NIP: 000000000007bea0 LR: c00000000007b054 CTR: c00000000007be70
REGS: c000000f1ba9b960 TRAP: 0400 Tainted: G D (4.13.0-rc2-00313-gf3026f57e6ed-dirty)
MSR: 10000000400010a1 <HV,ME,IR,LE> CR: 48000228 XER: 00000000
CFAR: c00000000007be74 SOFTE: 1
GPR00: c00000000007b054 c000000f1ba9bbe0 c000000000e6e000 000000000000001d
GPR04: c000000f1ba9bc00 c00000000007be70 00000000000000e8 9000000002009033
GPR08: 0000000002000000 100000000282f033 000000000b0a0900 0000000000001009
GPR12: 0000000000000000 c00000000fd42100 0706050303020100 a5a5a5a5a5a5a5a5
GPR16: 2e2e2e2e2e2de70c 2e2e2e2e2e2e2e2d 0000000000ff00ff 0606040202020000
GPR20: 000000000000005b ffffffffffffffff 0000000003020100 0000000000000000
GPR24: c000000f1ab90020 c000000f1ba9bc00 0000000000000001 0000000000000001
GPR28: c000000f1ba9bc90 c000000f1ba9bea0 000000000b0a0908 0000000000000001
NIP [000000000007bea0] 0x7bea0
LR [c00000000007b054] emulate_loadstore+0x1044/0x1280
Call Trace:
[c000000f1ba9bbe0] [c000000000076b80] analyse_instr+0x60/0x34f0 (unreliable)
[c000000f1ba9bc70] [c00000000007b7ec] emulate_step+0x23c/0x544
[c000000f1ba9bce0] [c000000000053424] arch_uprobe_skip_sstep+0x24/0x40
[c000000f1ba9bd00] [c00000000024b2f8] uprobe_notify_resume+0x598/0xba0
[c000000f1ba9be00] [c00000000001c284] do_notify_resume+0xd4/0xf0
[c000000f1ba9be30] [c00000000000bd44] ret_from_except_lite+0x70/0x74
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
---[ end trace a7ae7a7f3e0256b5 ]---
To fix this, we just revert to using r3 as before, since the callers
don't rely on r3 being left unmodified.
Fortunately, this can't be triggered by a misaligned load or store,
because vector loads and stores truncate misaligned addresses rather
than taking an alignment interrupt. It can be triggered using
uprobes.
Fixes: 350779a29f ("powerpc: Handle most loads and stores in instruction emulation code")
Reported-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Tested-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Older compilers think val may be used uninitialized:
arch/powerpc/lib/sstep.c: In function 'emulate_loadstore':
arch/powerpc/lib/sstep.c:2758:23: error: 'val' may be used uninitialized in this function
We know better, but initialise val to 0 to avoid breaking the build.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
memset() is patched after initialisation to activate the
optimised part which uses cache instructions.
Today we have a 'b 2f' to skip the optimised patch, which then gets
replaced by a NOP, implying a useless cycle consumption.
As we have a 'bne 2f' just before, we could use that instruction
for the live patching, hence removing the need to have a
dedicated 'b 2f' to be replaced by a NOP.
This patch changes the 'bne 2f' by a 'b 2f'. During init, that
'b 2f' is then replaced by 'bne 2f'
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is no need to extend the set value to an int when the length
is lower than 4 as in that case we only do byte stores.
We can therefore immediately branch to the part handling it.
By separating it from the normal case, we are able to eliminate
a few actions on the destination pointer.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 9445aa1a30 ("ppc: move exports to definitions")
added EXPORT_SYMBOL() for memset() and flush_hash_pages() in
the middle of the functions.
This patch moves them at the end of the two functions.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 694fc88ce2 ("powerpc/string: Implement optimized
memset variants") added memset16(), memset32() and memset64()
for the 64 bits PPC.
On 32 bits, memset64() is not relevant, and as shown below,
the generic version of memset32() gives a good code, so only
memset16() is candidate for an optimised version.
000009c0 <memset32>:
9c0: 2c 05 00 00 cmpwi r5,0
9c4: 39 23 ff fc addi r9,r3,-4
9c8: 4d 82 00 20 beqlr
9cc: 7c a9 03 a6 mtctr r5
9d0: 94 89 00 04 stwu r4,4(r9)
9d4: 42 00 ff fc bdnz 9d0 <memset32+0x10>
9d8: 4e 80 00 20 blr
The last part of memset() handling the not 4-bytes multiples
operates on bytes, making it unsuitable for handling word without
modification. As it would increase memset() complexity, it is
better to implement memset16() from scratch. In addition it
has the advantage of allowing a more optimised memset16() than what
we would have by using the memset() function.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman reported that emulate_loadstore() was trying to
access element 32 of regs->gpr[], which doesn't exist, when
emulating a string store instruction. This is because the string
load and store instructions (lswi, lswx, stswi and stswx) are
defined to wrap around from register 31 to register 0 if the number
of bytes being loaded or stored is sufficiently large. This wrapping
was not implemented in the emulation code. To fix it, we mask the
register number after incrementing it.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Fixes: c9f6f4ed95 ("powerpc: Implement emulation of string loads and stores")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds emulation for the lfiwax, lfiwzx and stfiwx instructions.
This necessitated adding a new flag to indicate whether a floating
point or an integer conversion was needed for LOAD_FP and STORE_FP,
so this moves the size field in op->type up 4 bits.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This replaces almost all of the instruction emulation code in
fix_alignment() with calls to analyse_instr(), emulate_loadstore()
and emulate_dcbz(). The only emulation code left is the SPE
emulation code; analyse_instr() etc. do not handle SPE instructions
at present.
One result of this is that we can now handle alignment faults on
all the new VSX load and store instructions that were added in POWER9.
VSX loads/stores will take alignment faults for unaligned accesses
to cache-inhibited memory.
Another effect is that we no longer rely on the DAR and DSISR values
set by the processor.
With this, we now need to include the instruction emulation code
unconditionally.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This moves the parts of emulate_step() that deal with emulating
load and store instructions into a new function called
emulate_loadstore(). This is to make it possible to reuse this
code in the alignment handler.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds code to the load and store emulation code to byte-swap
the data appropriately when the process being emulated is set to
the opposite endianness to that of the kernel.
This also enables the emulation for the multiple-register loads
and stores (lmw, stmw, lswi, stswi, lswx, stswx) to work for
little-endian. In little-endian mode, the partial word at the
end of a transfer for lsw*/stsw* (when the byte count is not a
multiple of 4) is loaded/stored at the least-significant end of
the register. Additionally, this fixes a bug in the previous
code in that it could call read_mem/write_mem with a byte count
that was not 1, 2, 4 or 8.
Note that this only works correctly on processors with "true"
little-endian mode, such as IBM POWER processors from POWER6 on, not
the so-called "PowerPC" little-endian mode that uses address swizzling
as implemented on the old 32-bit 603, 604, 740/750, 74xx CPUs.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds code to the instruction emulation code to set regs->dar
to the address of any memory access that fails. This address is
not necessarily the same as the effective address of the instruction,
because if the memory access is unaligned, it might cross a page
boundary and fault on the second page.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds code to analyse_instr() and emulate_step() to understand the
dcbz (data cache block zero) instruction. The emulate_dcbz() function
is made public so it can be used by the alignment handler in future.
(The apparently unnecessary cropping of the address to 32 bits is
there because it will be needed in that situation.)
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds lfdp[x] and stfdp[x] to the set of instructions that
analyse_instr() and emulate_step() understand.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds code to analyse_instr() and emulate_step() to handle the
vector element loads and stores:
lvebx, lvehx, lvewx, stvebx, stvehx, stvewx.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At present, the analyse_instr/emulate_step code checks for the
relevant MSR_FP/VEC/VSX bit being set when a FP/VMX/VSX load
or store is decoded, but doesn't recheck the bit before reading or
writing the relevant FP/VMX/VSX register in emulate_step().
Since we don't have preemption disabled, it is possible that we get
preempted between checking the MSR bit and doing the register access.
If that happened, then the registers would have been saved to the
thread_struct for the current process. Accesses to the CPU registers
would then potentially read stale values, or write values that would
never be seen by the user process.
Another way that the registers can become non-live is if a page
fault occurs when accessing user memory, and the page fault code
calls a copy routine that wants to use the VMX or VSX registers.
To fix this, the code for all the FP/VMX/VSX loads gets restructured
so that it forms an image in a local variable of the desired register
contents, then disables preemption, checks the MSR bit and either
sets the CPU register or writes the value to the thread struct.
Similarly, the code for stores checks the MSR bit, copies either the
CPU register or the thread struct to a local variable, then reenables
preemption and then copies the register image to memory.
If the instruction being emulated is in the kernel, then we must not
use the register values in the thread_struct. In this case, if the
relevant MSR enable bit is not set, then emulate_step refuses to
emulate the instruction.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At the moment, emulation of loads and stores of up to 8 bytes to
unaligned addresses on a little-endian system uses a sequence of
single-byte loads or stores to memory. This is rather inefficient,
and the code is hard to follow because it has many ifdefs.
In addition, the Power ISA has requirements on how unaligned accesses
are performed, which are not met by doing all accesses as
sequences of single-byte accesses.
Emulation of VSX loads and stores uses __copy_{to,from}_user,
which means the emulation code has no control on the size of
accesses.
To simplify this, we add new copy_mem_in() and copy_mem_out()
functions for accessing memory. These use a sequence of the largest
possible aligned accesses, up to 8 bytes (or 4 on 32-bit systems),
to copy memory between a local buffer and user memory. We then
rewrite {read,write}_mem_unaligned and the VSX load/store
emulation using these new functions.
These new functions also simplify the code in do_fp_load() and
do_fp_store() for the unaligned cases.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The addpcis instruction puts the sum of the next instruction address
plus a constant into a register. Since the result depends on the
address of the instruction, it will give an incorrect result if it
is single-stepped out of line, which is what the *probes subsystem
will currently do if a probe is placed on an addpcis instruction.
This fixes the problem by adding emulation of it to analyse_instr().
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The architecture shows the least-significant bit of the instruction
word as reserved for the popcnt[bwd], prty[wd] and bpermd
instructions, that is, these instructions never update CR0.
Therefore this changes the emulation of these instructions to
skip the CR0 update.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The case added for the isel instruction was added inside a switch
statement which uses the 10-bit minor opcode field in the 0x7fe
bits of the instruction word. However, for the isel instruction,
the minor opcode field is only the 0x3e bits, and the 0x7c0 bits
are used for the "BC" field, which indicates which CR bit to use
to select the result.
Therefore, for the isel emulation to work correctly when BC != 0,
we need to match on ((instr >> 1) & 0x1f) == 15). To do this, we
pull the isel case out of the switch statement and put it in an
if statement of its own.
Fixes: e27f71e5ff ("powerpc/lib/sstep: Add isel instruction emulation")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When a 64-bit processor is executing in 32-bit mode, the update forms
of load and store instructions are required by the architecture to
write the full 64-bit effective address into the RA register, though
only the bottom 32 bits are used to address memory. Currently,
the instruction emulation code writes the truncated address to the
RA register. This fixes it by keeping the full 64-bit EA in the
instruction_op structure, truncating the address in emulate_step()
where it is used to address memory, rather than in the address
computations in analyse_instr().
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This extends the instruction emulation infrastructure in sstep.c to
handle all the load and store instructions defined in the Power ISA
v3.0, except for the atomic memory operations, ldmx (which was never
implemented), lfdp/stfdp, and the vector element load/stores.
The instructions added are:
Integer loads and stores: lbarx, lharx, lqarx, stbcx., sthcx., stqcx.,
lq, stq.
VSX loads and stores: lxsiwzx, lxsiwax, stxsiwx, lxvx, lxvl, lxvll,
lxvdsx, lxvwsx, stxvx, stxvl, stxvll, lxsspx, lxsdx, stxsspx, stxsdx,
lxvw4x, lxsibzx, lxvh8x, lxsihzx, lxvb16x, stxvw4x, stxsibx, stxvh8x,
stxsihx, stxvb16x, lxsd, lxssp, lxv, stxsd, stxssp, stxv.
These instructions are handled both in the analyse_instr phase and in
the emulate_step phase.
The code for lxvd2ux and stxvd2ux has been taken out, as those
instructions were never implemented in any processor and have been
taken out of the architecture, and their opcodes have been reused for
other instructions in POWER9 (lxvb16x and stxvb16x).
The emulation for the VSX loads and stores uses helper functions
which don't access registers or memory directly, which can hopefully
be reused by KVM later.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This removes the checks for the FP/VMX/VSX enable bits in the MSR
from analyse_instr() and adds them to emulate_step() instead.
The reason for this is that we may want to use analyse_instr() in
a situation where the FP/VMX/VSX register values are stored in the
current thread_struct and the FP/VMX/VSX enable bits in the MSR
image in the pt_regs are zero. Since analyse_instr() doesn't make
any changes to register state, it is reasonable for it to indicate
what the effect of an instruction would be even though the relevant
enable bit is off.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The analyse_instr function currently doesn't just work out what an
instruction does, it also executes those instructions whose effect
is only to update CPU registers that are stored in struct pt_regs.
This is undesirable because optprobes uses analyse_instr to work out
if an instruction could be successfully emulated in future.
This changes analyse_instr so it doesn't modify *regs; instead it
stores information in the instruction_op structure to indicate what
registers (GPRs, CR, XER, LR) would be set and what value they would
be set to. A companion function called emulate_update_regs() can
then use that information to update a pt_regs struct appropriately.
As a minor cleanup, this replaces inline asm using the cntlzw and
cntlzd instructions with calls to __builtin_clz() and __builtin_clzl().
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Based on Matthew Wilcox's patches for other architectures.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds emulation for the isel instruction.
Tested for correctness against the isel instruction and its extended
mnemonics (lt, gt, eq) on ppc64le.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds emulation for the prtyw and prtyd instructions.
Tested for logical correctness against the prtyw and prtyd instructions
on ppc64le.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds emulation for the bpermd instruction.
Tested for correctness against the bpermd instruction on ppc64le.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds emulations for the popcntb, popcntw, and popcntd instructions.
Tested for correctness against the popcnt{b,w,d} instructions on ppc64le.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds emulation of the cmpb instruction, enabling xmon to
emulate this instruction.
Tested for correctness against the cmpb asm instruction on ppc64le.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
binutils >= 2.26 now warns about misuse of register expressions in
assembler operands that are actually literals, for example:
arch/powerpc/kernel/entry_64.S:535: Warning: invalid register expression
In practice these are almost all uses of r0 that should just be a
literal 0.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
[mpe: Mention r0 is almost always the culprit, fold in purgatory change]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nothing that really stands out, just a bunch of fixes that have come in in the
last couple of weeks.
None of these are actually fixes for code that is new in 4.13. It's roughly half
older bugs, with fixes going to stable, and half fixes/updates for Power9.
Thanks to:
Aneesh Kumar K.V, Anton Blanchard, Balbir Singh, Benjamin Herrenschmidt,
Madhavan Srinivasan, Michael Neuling, Nicholas Piggin, Oliver O'Halloran.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6eIT
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Nothing that really stands out, just a bunch of fixes that have come
in in the last couple of weeks.
None of these are actually fixes for code that is new in 4.13. It's
roughly half older bugs, with fixes going to stable, and half
fixes/updates for Power9.
Thanks to: Aneesh Kumar K.V, Anton Blanchard, Balbir Singh, Benjamin
Herrenschmidt, Madhavan Srinivasan, Michael Neuling, Nicholas Piggin,
Oliver O'Halloran"
* tag 'powerpc-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64: Fix atomic64_inc_not_zero() to return an int
powerpc: Fix emulation of mfocrf in emulate_step()
powerpc: Fix emulation of mcrf in emulate_step()
powerpc/perf: Add POWER9 alternate PM_RUN_CYC and PM_RUN_INST_CMPL events
powerpc/perf: Fix SDAR_MODE value for continous sampling on Power9
powerpc/asm: Mark cr0 as clobbered in mftb()
powerpc/powernv: Fix local TLB flush for boot and MCE on POWER9
powerpc/mm/radix: Synchronize updates to the process table
powerpc/mm/radix: Properly clear process table entry
powerpc/powernv: Tell OPAL about our MMU mode on POWER9
powerpc/kexec: Fix radix to hash kexec due to IAMR/AMOR
Testing the fortified string functions[1] would cause a kernel panic on
boot in test_feature_fixups() due to a buffer overflow in memcmp.
This boils down to things like this:
extern unsigned int ftr_fixup_test1;
extern unsigned int ftr_fixup_test1_orig;
check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0);
We know that these are asm labels so it is safe to read up to 'size'
bytes at those addresses.
However, because we have passed the address of a single unsigned int to
memcmp, the compiler believes the underlying object is in fact a single
unsigned int. So if size > sizeof(unsigned int), there will be a panic
at runtime.
We can fix this by changing the types: instead of calling the asm labels
unsigned ints, call them unsigned int[]s. Therefore the size isn't
incorrectly determined at compile time and we get a regular unsafe
memcmp and no panic.
[1] http://openwall.com/lists/kernel-hardening/2017/05/09/2
Link: http://lkml.kernel.org/r/1497903987-21002-7-git-send-email-keescook@chromium.org
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
From POWER4 onwards, mfocrf() only places the specified CR field into
the destination GPR, and the rest of it is set to 0. The PowerPC AS
from version 3.0 now requires this behaviour.
The emulation code currently puts the entire CR into the destination GPR.
Fix it.
Fixes: 6888199f7f ("[POWERPC] Emulate more instructions in software")
Cc: stable@vger.kernel.org # v2.6.22+
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The mcrf emulation code was using the CR field number directly as the shift
value, without taking into account that CR fields are numbered from 0-7 starting
at the high bits. That meant it was looking at the CR fields in the reverse
order.
Fixes: cf87c3f6b6 ("powerpc: Emulate icbi, mcrf and conditional-trap instructions")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch creates the window using text_poke_area, allocated via
get_vm_area(). text_poke_area is per CPU to avoid locking.
text_poke_area for each cpu is setup using late_initcall, prior to
setup of these alternate mapping areas, we continue to use direct
write to change/modify kernel text. With the ability to use alternate
mappings to write to kernel text, it provides us the freedom to then
turn text read-only and implement CONFIG_STRICT_KERNEL_RWX.
This code is CPU hotplug aware to ensure that the we have mappings for
any new cpus as they come online and tear down mappings for any CPUs
that go offline.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The xor_vmx.c file is used for the RAID5 xor operations. In these functions
altivec is enabled to run the operation and then disabled.
The code uses enable_kernel_altivec() around the core of the algorithm, however
the whole file is built with -maltivec, so the compiler is within its rights to
generate altivec code anywhere. This has been seen at least once in the wild:
0:mon> di $xor_altivec_2
c0000000000b97d0 3c4c01d9 addis r2,r12,473
c0000000000b97d4 3842db30 addi r2,r2,-9424
c0000000000b97d8 7c0802a6 mflr r0
c0000000000b97dc f8010010 std r0,16(r1)
c0000000000b97e0 60000000 nop
c0000000000b97e4 7c0802a6 mflr r0
c0000000000b97e8 faa1ffa8 std r21,-88(r1)
...
c0000000000b981c f821ff41 stdu r1,-192(r1)
c0000000000b9820 7f8101ce stvx v28,r1,r0 <-- POP
c0000000000b9824 38000030 li r0,48
c0000000000b9828 7fa101ce stvx v29,r1,r0
...
c0000000000b984c 4bf6a06d bl c0000000000238b8 # enable_kernel_altivec
This patch splits the non-altivec code into xor_vmx_glue.c which calls the
altivec functions in xor_vmx.c. By compiling xor_vmx_glue.c without
-maltivec we can guarantee that altivec instruction will not be executed
outside of the enable/disable block.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
[mpe: Rework change log and include disassembly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For final link, the powerpc64 linker generates fpr save/restore
functions on-demand, placing them in the .sfpr section. Starting with
binutils 2.25, these can be provided for non-final links with
--save-restore-funcs. Use that where possible for module links.
This saves about 200 bytes per module (~60kB) on powernv defconfig
build.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is no need to create a new section for these. Consolidate with
32-bit and just use .text.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 64-bit linker creates save/restore functions on demand with final
links, so vmlinux does not require crtsavres.o.
Make crtsavres.o extra-y on 64-bit (it is still required by modules).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Experiments with the netperf benchmark indicated that the size selecting
VMX-based copies in __copy_tofrom_user_power7() was suboptimal on POWER8.
Measurements showed that parity was in the neighbourhood of 3328 bytes,
rather than greater than 4096. The change gives a 1.5-2.0% improvement in
performance for 4096-byte buffers, reducing the relative time spent in
__copy_tofrom_user_power7() from approximately 7% to approximately 5% in
the TCP_RR benchmark.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Highlights include:
- Larger virtual address space on 64-bit server CPUs. By default we use a 128TB
virtual address space, but a process can request access to the full 512TB by
passing a hint to mmap().
- Support for the new Power9 "XIVE" interrupt controller.
- TLB flushing optimisations for the radix MMU on Power9.
- Support for CAPI cards on Power9, using the "Coherent Accelerator Interface
Architecture 2.0".
- The ability to configure the mmap randomisation limits at build and runtime.
- Several small fixes and cleanups to the kprobes code, as well as support for
KPROBES_ON_FTRACE.
- Major improvements to handling of system reset interrupts, correctly treating
them as NMIs, giving them a dedicated stack and using a new hypervisor call
to trigger them, all of which should aid debugging and robustness.
Many fixes and other minor enhancements.
Thanks to:
Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Ben
Hutchings, Benjamin Herrenschmidt, Bhupesh Sharma, Chris Packham, Christian
Zigotzky, Christophe Leroy, Christophe Lombard, Daniel Axtens, David Gibson,
Gautham R. Shenoy, Gavin Shan, Geert Uytterhoeven, Guilherme G. Piccoli,
Hamish Martin, Hari Bathini, Kees Cook, Laurent Dufour, Madhavan Srinivasan,
Mahesh J Salgaonkar, Mahesh Salgaonkar, Masami Hiramatsu, Matt Brown, Matthew
R. Ochs, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran,
Pan Xinhui, Paul Mackerras, Rashmica Gupta, Russell Currey, Sukadev
Bhattiprolu, Thadeu Lima de Souza Cascardo, Tobin C. Harding, Tyrel Datwyler,
Uma Krishnan, Vaibhav Jain, Vipin K Parashar, Yang Shi.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vSF3
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights include:
- Larger virtual address space on 64-bit server CPUs. By default we
use a 128TB virtual address space, but a process can request access
to the full 512TB by passing a hint to mmap().
- Support for the new Power9 "XIVE" interrupt controller.
- TLB flushing optimisations for the radix MMU on Power9.
- Support for CAPI cards on Power9, using the "Coherent Accelerator
Interface Architecture 2.0".
- The ability to configure the mmap randomisation limits at build and
runtime.
- Several small fixes and cleanups to the kprobes code, as well as
support for KPROBES_ON_FTRACE.
- Major improvements to handling of system reset interrupts,
correctly treating them as NMIs, giving them a dedicated stack and
using a new hypervisor call to trigger them, all of which should
aid debugging and robustness.
- Many fixes and other minor enhancements.
Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple,
Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton
Blanchard, Balbir Singh, Ben Hutchings, Benjamin Herrenschmidt,
Bhupesh Sharma, Chris Packham, Christian Zigotzky, Christophe Leroy,
Christophe Lombard, Daniel Axtens, David Gibson, Gautham R. Shenoy,
Gavin Shan, Geert Uytterhoeven, Guilherme G. Piccoli, Hamish Martin,
Hari Bathini, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mahesh J
Salgaonkar, Mahesh Salgaonkar, Masami Hiramatsu, Matt Brown, Matthew
R. Ochs, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Pan Xinhui, Paul Mackerras, Rashmica Gupta, Russell
Currey, Sukadev Bhattiprolu, Thadeu Lima de Souza Cascardo, Tobin C.
Harding, Tyrel Datwyler, Uma Krishnan, Vaibhav Jain, Vipin K Parashar,
Yang Shi"
* tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits)
powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it
powerpc/powernv: Fix TCE kill on NVLink2
powerpc/mm/radix: Drop support for CPUs without lockless tlbie
powerpc/book3s/mce: Move add_taint() later in virtual mode
powerpc/sysfs: Move #ifdef CONFIG_HOTPLUG_CPU out of the function body
powerpc/smp: Document irq enable/disable after migrating IRQs
powerpc/mpc52xx: Don't select user-visible RTAS_PROC
powerpc/powernv: Document cxl dependency on special case in pnv_eeh_reset()
powerpc/eeh: Clean up and document event handling functions
powerpc/eeh: Avoid use after free in eeh_handle_special_event()
cxl: Mask slice error interrupts after first occurrence
cxl: Route eeh events to all drivers in cxl_pci_error_detected()
cxl: Force context lock during EEH flow
powerpc/64: Allow CONFIG_RELOCATABLE if COMPILE_TEST
powerpc/xmon: Teach xmon oops about radix vectors
powerpc/mm/hash: Fix off-by-one in comment about kernel contexts ids
powerpc/pseries: Enable VFIO
powerpc/powernv: Fix iommu table size calculation hook for small tables
powerpc/powernv: Check kzalloc() return value in pnv_pci_table_alloc
powerpc: Add arch/powerpc/tools directory
...
Along similar lines as commit 9326638cbe ("kprobes, x86: Use NOKPROBE_SYMBOL()
instead of __kprobes annotation"), convert __kprobes annotation to either
NOKPROBE_SYMBOL() or nokprobe_inline. The latter forces inlining, in which case
the caller needs to be added to NOKPROBE_SYMBOL().
Also:
- blacklist arch_deref_entry_point(), and
- convert a few regular inlines to nokprobe_inline in lib/sstep.c
A key benefit is the ability to detect such symbols as being
blacklisted. Before this patch:
$ cat /sys/kernel/debug/kprobes/blacklist | grep read_mem
$ perf probe read_mem
Failed to write event: Invalid argument
Error: Failed to add events.
$ dmesg | tail -1
[ 3736.112815] Could not insert probe at _text+10014968: -22
After patch:
$ cat /sys/kernel/debug/kprobes/blacklist | grep read_mem
0xc000000000072b50-0xc000000000072d20 read_mem
$ perf probe read_mem
read_mem is blacklisted function, skip it.
Added new events:
(null):(null) (on read_mem)
probe:read_mem (on read_mem)
You can now use it in all perf tools, such as:
perf record -e probe:read_mem -aR sleep 1
$ grep " read_mem" /proc/kallsyms
c000000000072b50 t read_mem
c0000000005f3b40 t read_mem
$ cat /sys/kernel/debug/kprobes/list
c0000000005f3b48 k read_mem+0x8 [DISABLED]
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Minor change log formatting, fix up some conflicts]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Five fairly small fixes for things that went in this cycle.
A fairly large patch to rework the CAS logic on Power9, necessitated by a late
change to the firmware API, and we can't boot without it.
Three fixes going to stable, allowing more instructions to be emulated on LE,
fixing a boot crash on 32-bit Freescale BookE machines, and the OPAL XICS
workaround.
And a patch from me to sort the selects under CONFIG PPC. Annoying churn, but
worth it in the long run, and best for it to go in now to avoid conflicts.
Thanks to:
Alexey Kardashevskiy, Anton Blanchard, Balbir Singh, Gautham R. Shenoy,
Laurentiu Tudor, Nicholas Piggin, Paul Mackerras, Ravi Bangoria, Sachin Sant,
Shile Zhang, Suraj Jitindar Singh.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=SxON
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Five fairly small fixes for things that went in this cycle.
A fairly large patch to rework the CAS logic on Power9, necessitated
by a late change to the firmware API, and we can't boot without it.
Three fixes going to stable, allowing more instructions to be emulated
on LE, fixing a boot crash on 32-bit Freescale BookE machines, and the
OPAL XICS workaround.
And a patch from me to sort the selects under CONFIG PPC. Annoying
churn, but worth it in the long run, and best for it to go in now to
avoid conflicts.
Thanks to:
Alexey Kardashevskiy, Anton Blanchard, Balbir Singh, Gautham R.
Shenoy, Laurentiu Tudor, Nicholas Piggin, Paul Mackerras, Ravi
Bangoria, Sachin Sant, Shile Zhang, Suraj Jitindar Singh"
* tag 'powerpc-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Sort the selects under CONFIG_PPC
powerpc/64: Fix L1D cache shape vector reporting L1I values
powerpc/64: Avoid panic during boot due to divide by zero in init_cache_info()
powerpc: Update to new option-vector-5 format for CAS
powerpc: Parse the command line before calling CAS
powerpc/xics: Work around limitations of OPAL XICS priority handling
powerpc/64: Fix checksum folding in csum_add()
powerpc/powernv: Fix opal tracepoints with JUMP_LABEL=n
powerpc/booke: Fix boot crash due to null hugepd
powerpc: Fix compiling a BE kernel with a powerpc64le toolchain
selftest/powerpc: Fix false failures for skipped tests
powerpc/powernv: Fix bug due to labeling ambiguity in power_enter_stop
powerpc/64: Invalidate process table caching after setting process table
powerpc: emulate_step() tests for load/store instructions
powerpc: Emulation support for load/store instructions on LE
emulate_step() uses a number of underlying kernel functions that were
initially not enabled for LE. This has been rectified since. So, fix
emulate_step() for LE for the corresponding instructions.
Cc: stable@vger.kernel.org # v3.18+
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Update code that relied on sched.h including various MM types for them.
This will allow us to remove the <linux/mm_types.h> include from <linux/sched.h>.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Often all is needed is these small helpers, instead of compiler.h or a
full kprobes.h. This is important for asm helpers, in fact even some
asm/kprobes.h make use of these helpers... instead just keep a generic
asm file with helpers useful for asm code with the least amount of
clutter as possible.
Likewise we need now to also address what to do about this file for both
when architectures have CONFIG_HAVE_KPROBES, and when they do not. Then
for when architectures have CONFIG_HAVE_KPROBES but have disabled
CONFIG_KPROBES.
Right now most asm/kprobes.h do not have guards against CONFIG_KPROBES,
this means most architecture code cannot include asm/kprobes.h safely.
Correct this and add guards for architectures missing them.
Additionally provide architectures that not have kprobes support with
the default asm-generic solution. This lets us force asm/kprobes.h on
the header include/linux/kprobes.h always, but most importantly we can
now safely include just asm/kprobes.h on architecture code without
bringing the full kitchen sink of header files.
Two architectures already provided a guard against CONFIG_KPROBES on its
kprobes.h: sh, arch. The rest of the architectures needed gaurds added.
We avoid including any not-needed headers on asm/kprobes.h unless
kprobes have been enabled.
In a subsequent atomic change we can try now to remove compiler.h from
include/linux/kprobes.h.
During this sweep I've also identified a few architectures defining a
common macro needed for both kprobes and ftrace, that of the definition
of the breakput instruction up. Some refer to this as
BREAKPOINT_INSTRUCTION. This must be kept outside of the #ifdef
CONFIG_KPROBES guard.
[mcgrof@kernel.org: fix arm64 build]
Link: http://lkml.kernel.org/r/CAB=NE6X1WMByuARS4mZ1g9+W=LuVBnMDnh_5zyN0CLADaVh=Jw@mail.gmail.com
[sfr@canb.auug.org.au: fixup for kprobes declarations moving]
Link: http://lkml.kernel.org/r/20170214165933.13ebd4f4@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170203233139.32682-1-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current infrastructure of kprobe uses the unconditional trap instruction
to probe a running kernel. Optprobe allows kprobe to replace the trap
with a branch instruction to a detour buffer. Detour buffer contains
instructions to create an in memory pt_regs. Detour buffer also has a
call to optimized_callback() which in turn call the pre_handler(). After
the execution of the pre-handler, a call is made for instruction
emulation. The NIP is determined in advanced through dummy instruction
emulation and a branch instruction is created to the NIP at the end of
the trampoline.
To address the limitation of branch instruction in POWER architecture,
detour buffer slot is allocated from a reserved area. For the time
being, 64KB is reserved in memory for this purpose.
Instructions which can be emulated using analyse_instr() are the
candidates for optimization. Before optimization ensure that the address
range between the detour buffer allocated and the instruction being
probed is within +/- 32MB.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To permit the use of relative branch instruction in powerpc, the target
address has to be relatively nearby, since the address is specified in an
immediate field (24 bit filed) in the instruction opcode itself. Here
nearby refers to 32MB on either side of the current instruction.
This patch verifies whether the target address is within +/- 32MB
range or not.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In a number of places we called "cache line size" what is actually
the cache block size, which in the powerpc architecture, means the
effective size to use with cache management instructions (it can
be different from the actual cache line size).
We fix the naming across the board and properly retrieve both
pieces of information when available in the device-tree.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Setting err and going to ldst_done just returns 0, without using err, so
just return 0 directly. We already do that for other call sites in this
function.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[mpe: Rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently we have optimized hand-coded assembly checksum routines for
big-endian 64-bit systems, but for little-endian we use the generic C
routines. This modifies the optimized routines to work for
little-endian. With this, we no longer need to enable
CONFIG_GENERIC_CSUM. This also fixes a couple of comments in
checksum_64.S so they accurately reflect what the associated instruction
does.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Use the more common __BIG_ENDIAN__]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Simon Guo