Commit Graph

5862 Commits

Author SHA1 Message Date
Linus Torvalds e80b135985 Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: x86: Add support for the ANY bit
  perf: Change the is_software_event() definition
  perf: Honour event state for aux stream data
  perf: Fix perf_event_do_pending() fallback callsite
  perf kmem: Print usage help for unknown commands
  perf kmem: Increase "Hit" column length
  hw-breakpoints, perf: Fix broken mmiotrace due to dr6 by reference change
  perf timechart: Use tid not pid for COMM change
2010-01-21 08:50:04 -08:00
Stephane Eranian b27d515a49 perf: x86: Add support for the ANY bit
Propagate the ANY bit into the fixed counter config for v3 and higher.

Signed-off-by: Stephane Eranian <eranian@google.com>
[a.p.zijlstra@chello.nl: split from larger patch]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4b5430c6.0f975e0a.1bf9.ffff85fe@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-21 13:40:41 +01:00
Len Brown be6066f34c Merge branch 'misc' into release 2010-01-20 01:23:27 -05:00
Suresh Siddha bb668da6d6 x86, apic: use logical flat for systems with <= 8 logical cpus
We can use logical flat mode if there are <= 8 logical cpu's
(irrespective of physical apic id values).  This will enable simplified
and efficient IPI and device interrupt routing on such platforms.

This has been tested to work on both Intel and AMD platforms.
Exceptions like IBM summit platform which can't use logical flat mode
are addressed by using OEM platform checks.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Chris McDermott <lcm@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-18 14:15:28 -08:00
Suresh Siddha dfea91d5a7 x86, apic: use physical mode for IBM summit platforms
Chris McDermott from IBM confirmed that hurricane chipset in IBM summit
platforms doesn't support logical flat mode.  Irrespective of the other
things like apic_id's, total number of logical cpu's, Linux kernel
should default to physical mode for this system.

The 32-bit kernel does so using the OEM checks for the IBM summit
platform.  Add a similar OEM platform check for the 64bit kernel too.

Otherwise the linux kernel boot can hang on this platform under certain
bios/platform settings.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Tested-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Chris McDermott <lcm@linux.vnet.ibm.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-18 14:15:27 -08:00
Linus Torvalds 330a518a1a Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, uv: Ensure hub revision set for all ACPI modes.
  x86, uv: Add function retrieving node controller revision number
  x86: xen: 64-bit kernel RPL should be 0
  x86: kernel_thread() -- initialize SS to a known state
  x86/agp: Fix agp_amd64_init and agp_amd64_cleanup
  x86: SGI UV: Fix mapping of MMIO registers
  x86: mce.h: Fix warning in header checks
2010-01-16 12:31:42 -08:00
Russ Anderson 1d2c867c94 x86, uv: Ensure hub revision set for all ACPI modes.
Ensure that UV hub revision is set for all ACPI modes.

Signed-off-by: Russ Anderson <rja@sgi.com>
LKML-Reference: <20100115180908.GB7757@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-15 11:09:04 -08:00
Jack Steiner 7a1110e861 x86, uv: Add function retrieving node controller revision number
Add function for determining the revision id of the SGI UV
node controller chip (HUB). This function is needed in a
subsequent patch.

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20100112210904.GA24546@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-15 11:08:55 -08:00
Cyrill Gorcunov 864a0922dd x86: kernel_thread() -- initialize SS to a known state
Before the kernel_thread was converted into "C" we had
pt_regs::ss set to __KERNEL_DS (by SAVE_ALL asm macro).

Though I must admit I didn't find any *explicit* load of
%ss from this structure the better to be on a safe side
and set it to a known value.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Jeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com>
Cc: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1263377768-19600-1-git-send-email-ian.campbell@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-13 11:23:45 +01:00
FUJITA Tomonori 42590a7501 x86/agp: Fix agp_amd64_init and agp_amd64_cleanup
This fixes the regression introduced by the commit
f405d2c023.

The above commit fixes the following issue:

  http://marc.info/?l=linux-kernel&m=126192729110083&w=2

However, it doesn't work properly when you remove and insert the
agp_amd64 module again.

agp_amd64_init() and agp_amd64_cleanup should be called only
when gart_iommu is not called earlier (that is, the GART IOMMU
is not enabled). We need to use 'gart_iommu_aperture' to see if
GART IOMMU is enabled or not.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: mitov@issp.bas.bg
Cc: davej@redhat.com
LKML-Reference: <20100104161603L.fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-13 11:15:37 +01:00
Mike Travis fcfbb2b5fa x86: SGI UV: Fix mapping of MMIO registers
This fixes the problem of the initialization code not correctly
mapping the entire MMIO space on a UV system.  A side effect is
the map_high() interface needed to be changed to accommodate
different address and size shifts.

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Mike Habeck <habeck@sgi.com>
Cc: <stable@kernel.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4B479202.7080705@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-13 10:56:27 +01:00
Frederic Weisbecker c2c5d45d46 perf: Stop stack frame walking off kernel addresses boundaries
While processing kernel perf callchains, an bad entry can be
considered as a valid stack pointer but not as a kernel address.

In this case, we hang in an endless loop. This can happen in an
x86-32 kernel after processing the last entry in a kernel
stacktrace.

Just stop the stack frame walking after we encounter an invalid
kernel address.

This fixes a hard lockup in x86-32.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1262227945-27014-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-13 09:32:54 +01:00
Ananth N Mavinakayanahalli 066000dd85 Revert "x86, apic: Use logical flat on intel with <= 8 logical cpus"
Revert commit 2fbd07a5f5, as this commit
breaks an IBM platform with quad-core Xeon cpu's.

According to Suresh, this might be an IBM platform issue, as on other
Intel platforms with <= 8 logical cpu's, logical flat mode works fine
irespective of physical apic id values (inline with the xapic
architecture).

Revert this for now because of the IBM platform breakage.

Another version will be re-submitted after the complete analysis.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 16:47:57 -08:00
Linus Torvalds 80e23b7cea Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip:
  x86, irq: Check move_in_progress before freeing the vector mapping
  x86: copy_from_user() should not return -EFAULT
  Revert "x86: Side-step lguest problem by only building cmpxchg8b_emu for pre-Pentium"
  x86/pci: Intel ioh bus num reg accessing fix
  x86: Fix size for ex trampoline with 32bit
2010-01-08 13:55:52 -08:00
Len Brown 8558e3943d x86, ACPI: delete acpi_boot_table_init() return value
cleanup only.

setup_arch(), doesn't care care if ACPI initialization succeeded
or failed, so delete acpi_boot_table_init()'s return value.

Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-06 16:18:15 -05:00
Suresh Siddha 7f41c2e152 x86, irq: Check move_in_progress before freeing the vector mapping
With the recent irq migration fixes (post 2.6.32), Gary Hade has noticed
"No IRQ handler for vector" messages during the 2.6.33-rc1 kernel boot on IBM
AMD platforms and root caused the issue to this commit:

> commit 23359a88e7
> Author: Suresh Siddha <suresh.b.siddha@intel.com>
> Date:   Mon Oct 26 14:24:33 2009 -0800
>
>    x86: Remove move_cleanup_count from irq_cfg

As part of this patch, we have removed the move_cleanup_count check
in smp_irq_move_cleanup_interrupt(). With this change, we can run into a
situation where an irq cleanup interrupt on a cpu can cleanup the vector
mappings associated with multiple irqs, of which one of the irq's migration
might be still in progress. As such when that irq hits the old cpu, we get
the "No IRQ handler" messages.

Fix this by checking for the irq_cfg's move_in_progress and if the move
is still in progress delay the vector cleanup to another irq cleanup
interrupt request (which will happen when the irq starts arriving at the
new cpu destination).

Reported-and-tested-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1262804191.2732.7.camel@sbs-t61.sc.intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-06 12:08:43 -08:00
Yinghai Lu 9dad0fd5a7 x86: Fix size for ex trampoline with 32bit
fix for error that is introduced by
| x86: Use find_e820() instead of hard coded trampoline address

it should end with PAGE_SIZE + PAGE_SIZE

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1261525263-13763-2-git-send-email-yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-04 13:20:11 -08:00
Linus Torvalds 952363c90c Merge branch 'perf-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Fix NULL deref in inheritance code
  perf: Pass appropriate frame pointer to dump_trace()
2009-12-31 11:56:24 -08:00
Linus Torvalds 2d959e9565 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/agp: Fix agp_amd64_init() initialization with CONFIG_GART_IOMMU enabled
  x86: SGI UV: Fix writes to led registers on remote uv hubs
  x86, kmemcheck: Use KERN_WARNING for error reporting
  x86: Use KERN_DEFAULT log-level in __show_regs()
  x86, compress: Force i386 instructions for the decompressor
  x86/amd-iommu: Fix initialization failure panic
  dma-debug: Do not add notifier when dma debugging is disabled.
  x86: Fix objdump version check in chkobjdump.awk for different formats.

Trivial conflicts in arch/x86/include/asm/uv/uv_hub.h due to me having
applied an earlier version of an SGI UV fix.
2009-12-31 11:54:13 -08:00
Frederic Weisbecker 48b5ba9cc9 perf: Pass appropriate frame pointer to dump_trace()
Pass the frame pointer from the regs of the interrupted path
to dump_trace() while processing the stack trace.

Currently, dump_trace() takes the current bp and starts the
callchain from dump_trace() itself. This is wasteful because
we need to walk through the entire NMI/DEBUG stack before
retrieving the interrupted point.

We can fix that by just using the frame pointer from the
captured regs. It points exactly where we want to start.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1262235183-5320-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
2009-12-31 13:11:31 +01:00
Linus Torvalds 08d869aa86 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: introduce kernel parameter acpi_sleep=sci_force_enable
  ACPI: WMI: Survive BIOS with duplicate GUIDs
  dell-wmi - fix condition to abort driver loading
  wmi: check find_guid() return value to prevent oops
  dell-wmi, hp-wmi, msi-wmi: check wmi_get_event_data() return value
  ACPI: hp-wmi, msi-wmi: clarify that wmi_install_notify_handler() returns an acpi_status
  dell-wmi: sys_init_module: 'dell_wmi'->init suspiciously returned 21, it should
  ACPI video: correct error-handling code
  ACPI video: no warning message if "acpi_backlight=vendor" is used
  ACPI: fix ACPI=n allmodconfig build
  thinkpad-acpi: improve Kconfig help text
  thinkpad-acpi: update volume subdriver documentation
  thinkpad-acpi: make volume subdriver optional
  thinkpad-acpi: don't fail to load the entire module due to ALSA problems
  thinkpad-acpi: don't take the first ALSA slot by default
2009-12-30 16:00:24 -08:00
Zhang Rui d7f0eea9e4 ACPI: introduce kernel parameter acpi_sleep=sci_force_enable
Introduce kernel parameter acpi_sleep=sci_force_enable

some laptop requires SCI_EN being set directly on resume,
or else they hung somewhere in the resume code path.

We already have a blacklist for these laptops but we still need
this option, especially when debugging some suspend/resume problems,
in case there are systems that need this workaround and are not yet
in the blacklist.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-30 18:32:01 -05:00
Mike Travis 9a7262a056 x86_64 SGI UV: Fix writes to led registers on remote uv hubs.
The wrong address was being used to write the SCIR led regs on remote
hubs.  Also, there was an inconsistency between how BIOS and the kernel
indexed these regs.  Standardize on using the lower 6 bits of the APIC
ID as the index.

This patch fixes the problem of writing to an errant address to a
cpu # >= 64.

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Jack Steiner <steiner@sgi.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-30 12:25:26 -08:00
Mike Travis 39d3077099 x86: SGI UV: Fix writes to led registers on remote uv hubs
The wrong address was being used to write the SCIR led regs on
remote hubs.  Also, there was an inconsistency between how BIOS
and the kernel indexed these regs.  Standardize on using the
lower 6 bits of the APIC ID as the index.

This patch fixes the problem of writing to an errant address to
a cpu # >= 64.

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Jack Steiner <steiner@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@kernel.org
LKML-Reference: <4B3922F9.3060905@sgi.com>
[ v2: fix a number of annoying checkpatch artifacts and whitespace noise ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-29 06:47:39 +01:00
Pekka Enberg d015a09298 x86: Use KERN_DEFAULT log-level in __show_regs()
Andrew Morton reported a strange looking kmemcheck warning:

  WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88004fba6c20)
  0000000000000000310000000000000000000000000000002413000000c9ffff
   u u u u u u u u u u u u u u u u i i i i i i i i u u u u u u u u

   [<ffffffff810af3aa>] kmemleak_scan+0x25a/0x540
   [<ffffffff810afbcb>] kmemleak_scan_thread+0x5b/0xe0
   [<ffffffff8104d0fe>] kthread+0x9e/0xb0
   [<ffffffff81003074>] kernel_thread_helper+0x4/0x10
   [<ffffffffffffffff>] 0xffffffffffffffff

The above printout is missing register dump completely. The
problem here is that the output comes from syslog which doesn't
show KERN_INFO log-level messages. We didn't see this before
because both of us were testing on 32-bit kernels which use the
_default_ log-level.

Fix that up by explicitly using KERN_DEFAULT log-level for
__show_regs() printks.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1261988819.4641.2.camel@penberg-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-28 09:40:21 +01:00
Ingo Molnar 605c1a187f Merge branch 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent 2009-12-28 09:23:13 +01:00
Len Brown fcb11235d3 Merge branch 'misc-2.6.33' into release 2009-12-24 01:19:00 -05:00
Len Brown da3df858c8 Merge branch 'pdc' into release 2009-12-24 01:17:21 -05:00
Linus Torvalds 2f99f5c8f0 Revert "x86, ucode-amd: Ensure ucode update on suspend/resume after CPU off/online cycle"
This reverts commit 9f15226e75.  It's just
wrong, and broke resume for Rafael even on a non-AMD CPU.

As Rafael says:
 "... it causes microcode_init_cpu() to be called during resume even for
  CPUs for which there's no microcode to apply.  That, in turn, results
  in executing request_firmware() (on Intel CPUs at least) which doesn't
  work at this stage of resume (we have device interrupts disabled, I/O
  devices are still suspended and so on).

  If I'm not mistaken, the "if (uci->valid)" logic means "if that CPU is
  known to us" , so before commit 9f15226e75 microcode_resume_cpu() was
  called for all CPUs already in the system during suspend, which was
  the right thing to do.  The commit changed it so that the CPUs without
  microcode to apply are now treated as "unknown", which is not quite
  right.

  The problem this commit attempted to solve has to be handled
  differently."

Bisected-and -requested-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-23 15:04:53 -08:00
Andrew Morton 4a28395d72 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c: avoid cross-CPU interrupts by using smp_call_function_any()
Presently acpi-cpufreq will perform the MSR read on the first CPU in the
mask.  That's inefficient if that CPU differs from the current CPU.
Because we have to perform a cross-CPU call, but we could have run the
rdmsr on the current CPU.

So switch to using the new smp_call_function_any(), which will perform the
call on the current CPU if that CPU is present in the mask (it is).

Cc: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 15:03:57 -05:00
Alex Chiang 47817254b8 ACPI: processor: unify arch_acpi_processor_cleanup_pdc
The x86 and ia64 implementations of the function in $subject are
exactly the same.

Also, since the arch-specific implementations of setting _PDC have
been completely hollowed out, remove the empty shells.

Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:24:14 -05:00
Alex Chiang 6c5807d7bc ACPI: processor: finish unifying arch_acpi_processor_init_pdc()
The only thing arch-specific about calling _PDC is what bits get
set in the input obj_list buffer.

There's no need for several levels of indirection to twiddle those
bits. Additionally, since we're just messing around with a buffer,
we can simplify the interface; no need to pass around the entire
struct acpi_processor * just to get at the buffer.

Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:24:13 -05:00
Alex Chiang 08ea48a326 ACPI: processor: factor out common _PDC settings
Both x86 and ia64 initialize _PDC with mostly common bit settings.

Factor out the common settings and leave the arch-specific ones alone.

Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:24:12 -05:00
Alex Chiang 407cd87c54 ACPI: processor: unify arch_acpi_processor_init_pdc
The x86 and ia64 implementations of arch_acpi_processor_init_pdc()
are almost exactly the same. The only difference is in what bits
they set in obj_list buffer.

Combine the boilerplate memory management code, and leave the
arch-specific bit twiddling in separate implementations.

Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:24:11 -05:00
Alex Chiang 1d9cb470a7 ACPI: processor: introduce arch_has_acpi_pdc
arch dependent helper function that tells us if we should attempt to
evaluate _PDC on this machine or not.

The x86 implementation assumes that the CPUs in the machine must be
homogeneous, and that you cannot mix CPUs of different vendors.

Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:24:10 -05:00
Joerg Roedel 0f76480643 x86/amd-iommu: Fix initialization failure panic
The assumption that acpi_table_parse passes the return value
of the hanlder function to the caller proved wrong
recently. The return value of the handler function is
totally ignored. This makes the initialization code for AMD
IOMMU buggy in a way that could cause a kernel panic on
initialization. This patch fixes the issue in the AMD IOMMU
driver.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-12-21 15:51:23 +01:00
Linus Torvalds eca9dfcd00 Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf session: Make events_stats u64 to avoid overflow on 32-bit arches
  hw-breakpoints: Fix hardware breakpoints -> perf events dependency
  perf events: Dont report side-band events on each cpu for per-task-per-cpu events
  perf events, x86/stacktrace: Fix performance/softlockup by providing a special frame pointer-only stack walker
  perf events, x86/stacktrace: Make stack walking optional
  perf events: Remove unused perf_counter.h header file
  perf probe: Check new event name
  kprobe-tracer: Check new event/group name
  perf probe: Check whether debugfs path is correct
  perf probe: Fix libdwarf include path for Debian
2009-12-19 09:48:42 -08:00
Linus Torvalds 3981e15286 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, irq: Allow 0xff for /proc/irq/[n]/smp_affinity on an 8-cpu system
  Makefile: Unexport LC_ALL instead of clearing it
  x86: Fix objdump version check in arch/x86/tools/chkobjdump.awk
  x86: Reenable TSC sync check at boot, even with NONSTOP_TSC
  x86: Don't use POSIX character classes in gen-insn-attr-x86.awk
  Makefile: set LC_CTYPE, LC_COLLATE, LC_NUMERIC to C
  x86: Increase MAX_EARLY_RES; insufficient on 32-bit NUMA
  x86: Fix checking of SRAT when node 0 ram is not from 0
  x86, cpuid: Add "volatile" to asm in native_cpuid()
  x86, msr: msrs_alloc/free for CONFIG_SMP=n
  x86, amd: Get multi-node CPU info from NodeId MSR instead of PCI config space
  x86: Add IA32_TSC_AUX MSR and use it
  x86, msr/cpuid: Register enough minors for the MSR and CPUID drivers
  initramfs: add missing decompressor error check
  bzip2: Add missing checks for malloc returning NULL
  bzip2/lzma/gzip: pre-boot malloc doesn't return NULL on failure
2009-12-19 09:48:14 -08:00
Suresh Siddha 18374d89e5 x86, irq: Allow 0xff for /proc/irq/[n]/smp_affinity on an 8-cpu system
John Blackwood reported:
> on an older Dell PowerEdge 6650 system with 8 cpus (4 are hyper-threaded),
> and  32 bit (x86) kernel, once you change the irq smp_affinity of an irq
> to be less than all cpus in the system, you can never change really the
> irq smp_affinity back to be all cpus in the system (0xff) again,
> even though no error status is returned on the "/bin/echo ff >
> /proc/irq/[n]/smp_affinity" operation.
>
> This is due to that fact that BAD_APICID has the same value as
> all cpus (0xff) on 32bit kernels, and thus the value returned from
> set_desc_affinity() via the cpu_mask_to_apicid_and() function is treated
> as a failure in set_ioapic_affinity_irq_desc(), and no affinity changes
> are made.

set_desc_affinity() is already checking if the incoming cpu mask
intersects with the cpu online mask or not. So there is no need
for the apic op cpu_mask_to_apicid_and() to check again
and return BAD_APICID.

Remove the BAD_APICID return value from cpu_mask_to_apicid_and()
and also fix set_desc_affinity() to return -1 instead of using BAD_APICID
to represent error conditions (as cpu_mask_to_apicid_and() can return
logical or physical apicid values and BAD_APICID is really to represent
bad physical apic id).

Reported-by: John Blackwood <john.blackwood@ccur.com>
Root-caused-by: John Blackwood <john.blackwood@ccur.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1261103386.2535.409.camel@sbs-t61>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-17 22:03:06 -08:00
Linus Torvalds 55db493b65 Merge branch 'cpumask-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* 'cpumask-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  cpumask: rename tsk_cpumask to tsk_cpus_allowed
  cpumask: don't recommend set_cpus_allowed hack in Documentation/cpu-hotplug.txt
  cpumask: avoid dereferencing struct cpumask
  cpumask: convert drivers/idle/i7300_idle.c to cpumask_var_t
  cpumask: use modern cpumask style in drivers/scsi/fcoe/fcoe.c
  cpumask: avoid deprecated function in mm/slab.c
  cpumask: use cpu_online in kernel/perf_event.c
2009-12-17 17:00:20 -08:00
Pallipadi, Venkatesh 6c56ccecf0 x86: Reenable TSC sync check at boot, even with NONSTOP_TSC
Commit 83ce4009 did the following change
If the TSC is constant and non-stop, also set it reliable.

But, there seems to be few systems that will end up with TSC warp across
sockets, depending on how the cpus come out of reset. Skipping TSC sync
test on such systems may result in time inconsistency later.

So, reenable TSC sync test even on constant and non-stop TSC systems.
Set, sched_clock_stable to 1 by default and reset it in
mark_tsc_unstable, if TSC sync fails.

This change still gives perf benefit mentioned in 83ce4009 for systems
where TSC is reliable.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20091217202702.GA18015@linux-os.sc.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-17 14:44:35 -08:00
Linus Torvalds 04a1e62c2c x86/ptrace: make genregs[32]_get/set more robust
The loop condition is fragile: we compare an unsigned value to zero, and
then decrement it by something larger than one in the loop.  All the
callers should be passing in appropriately aligned buffer lengths, but
it's better to just not rely on it, and have some appropriate defensive
loop limits.

Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-17 07:04:56 -08:00
Frederic Weisbecker 06d65bda75 perf events, x86/stacktrace: Fix performance/softlockup by providing a special frame pointer-only stack walker
It's just wasteful for stacktrace users like perf to walk
through every entries on the stack whereas these only accept
reliable ones, ie: that the frame pointer validates.

Since perf requires pure reliable stacktraces, it needs a stack
walker based on frame pointers-only to optimize the stacktrace
processing.

This might solve some near-lockup scenarios that can be triggered
by call-graph tracing timer events.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1261024834-5336-2-git-send-regression-fweisbec@gmail.com>
[ v2: fix for modular builds and small detail tidyup ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-17 10:42:52 +01:00
Frederic Weisbecker 61c1917f47 perf events, x86/stacktrace: Make stack walking optional
The current print_context_stack helper that does the stack
walking job is good for usual stacktraces as it walks through
all the stack and reports even addresses that look unreliable,
which is nice when we don't have frame pointers for example.

But we have users like perf that only require reliable
stacktraces, and those may want a more adapted stack walker, so
lets make this function a callback in stacktrace_ops that users
can tune for their needs.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1261024834-5336-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-17 09:56:19 +01:00
Rusty Russell a4636818f8 cpumask: rename tsk_cpumask to tsk_cpus_allowed
Noone uses this wrapper yet, and Ingo asked that it be kept consistent
with current task_struct usage.

(One user crept in via linux-next: fixed)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tejun Heo <tj@kernel.org>
2009-12-17 11:43:30 +10:30
Yinghai Lu 6a1e008a09 x86: Increase MAX_EARLY_RES; insufficient on 32-bit NUMA
Due to recent changes wakeup and mptable, we run out of early
reservations on 32-bit NUMA.  Thus, adjust the available number.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4B22D754.2020706@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-16 16:46:23 -08:00
Andreas Herrmann 9d260ebc09 x86, amd: Get multi-node CPU info from NodeId MSR instead of PCI config space
Use NodeId MSR to get NodeId and number of nodes per processor.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20091216144355.GB28798@alberich.amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-16 15:06:23 -08:00
Linus Torvalds 288f02bbb6 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (117 commits)
  ACPI processor: Fix section mismatch for processor_add()
  ACPI: Add platform-wide _OSC support.
  ACPI: cleanup pci_root _OSC code.
  ACPI: Add a generic API for _OSC -v2
  msi-wmi: depend on backlight and fix corner-cases problems
  msi-wmi: switch to using input sparse keymap library
  msi-wmi: replace one-condition switch-case with if statement
  msi-wmi: remove unused field 'instance' in key_entry structure
  msi-wmi: remove custom runtime debug implementation
  msi-wmi: rework init
  msi-wmi: remove useless includes
  X86 drivers: Introduce msi-wmi driver
  Toshiba Bluetooth Enabling driver (RFKill handler v3)
  ACPI: fix for lapic_timer_propagate_broadcast()
  acpi_pad: squish warning
  ACPI: dock: minor whitespace and style cleanups
  ACPI: dock: add struct dock_station * directly to platform device data
  ACPI: dock: dock_add - hoist up platform_device_register_simple()
  ACPI: dock: remove global 'dock_device_name'
  ACPI: dock: combine add|alloc_dock_dependent_device (v2)
  ...
2009-12-16 12:33:19 -08:00
Linus Torvalds 61ecdb84c1 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix kprobes build with non-gawk awk
  x86: Split swiotlb initialization into two stages
  x86: Regex support and known-movable symbols for relocs, fix _end
  x86, msr: Remove incorrect, duplicated code in the MSR driver
  x86: Merge kernel_thread()
  x86: Sync 32/64-bit kernel_thread
  x86, 32-bit: Use same regs as 64-bit for kernel_thread_helper
  x86, 64-bit: Use user_mode() to determine new stack pointer in copy_thread()
  x86, 64-bit: Move kernel_thread to C
  x86-64, paravirt: Call set_iopl_mask() on 64 bits
  x86-32: Avoid pipeline serialization in PTREGSCALL1 and 2
  x86: Merge sys_clone
  x86, 32-bit: Convert sys_vm86 & sys_vm86old
  x86: Merge sys_sigaltstack
  x86: Merge sys_execve
  x86: Merge sys_iopl
  x86-32: Add new pt_regs stubs
  cpumask: Use modern cpumask style in arch/x86/kernel/cpu/mcheck/mce-inject.c
2009-12-16 12:02:37 -08:00
Linus Torvalds 74f3ae7434 Merge branch 'module' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* 'module' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  modpost: fix segfault with short symbol names
  module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y
  Kbuild: clear marker out of modpost
  module: make MODULE_SYMBOL_PREFIX into a CONFIG option
  ARM: unexport symbols used to implement floating point emulation
  ARM: use unified discard definition in linker script
  x86: don't export inline function
  sparc64: don't export static inline pci_ functions
2009-12-16 10:47:24 -08:00