Implements the setting of ACLs in AFS by means of setting the
afs.acl extended attribute on the file.
Signed-off-by: Joe Gorse <jhgorse@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Implement an xattr on AFS files called "afs.acl" that retrieves a file's
ACL. It returns the raw AFS3 ACL from the result of calling FS.FetchACL,
leaving any interpretation to userspace.
Note that whilst YFS servers will respond to FS.FetchACL, this will render
a more-advanced YFS ACL down. Use "afs.yfs.acl" instead for that.
Signed-off-by: David Howells <dhowells@redhat.com>
The AFS3 FID is three 32-bit unsigned numbers and is represented as three
up-to-8-hex-digit numbers separated by colons to the afs.fid xattr.
However, with the advent of support for YFS, the FID is now a 64-bit volume
number, a 96-bit vnode/inode number and a 32-bit uniquifier (as before).
Whilst the sprintf in afs_xattr_get_fid() has been partially updated (it
currently ignores the upper 32 bits of the 96-bit vnode number), the size
of the stack-based buffer has not been increased to match, thereby allowing
stack corruption to occur.
Fix this by increasing the buffer size appropriately and conditionally
including the upper part of the vnode number if it is non-zero. The latter
requires the lower part to be zero-padded if the upper part is non-zero.
Fixes: 3b6492df41 ("afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS")
Signed-off-by: David Howells <dhowells@redhat.com>
Fix the ->get handlers for the afs.cell and afs.volume xattrs to pass the
source data size to memcpy() rather than target buffer size.
Overcopying the source data occasionally causes the kernel to oops.
Fixes: d3e3b7eac8 ("afs: Add metadata xattrs")
Signed-off-by: David Howells <dhowells@redhat.com>
While it's not possible to give an accurate number for the blocks
used on the server, populate i_blocks based on the file size so
that 'du' can give a reasonable estimate.
The value is rounded up to 1K granularity, for consistency with
what other AFS clients report, and the servers' 1K usage quota
unit. Note that the value calculated by 'du' at the root of a
volume can still be slightly lower than the quota usage on the
server, as 0-length files are charged 1 quota block, but are
reported as occupying 0 blocks. Again, this is consistent with
other AFS clients.
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Log more information when "kAFS: AFS vnode with undefined type\n" is
displayed due to a vnode record being retrieved from the server that
appears to have a duff file type (usually 0). This prints more information
to try and help pin down the problem.
Signed-off-by: David Howells <dhowells@redhat.com>
Provide byte-range file locking emulation that can be configured at mount
time to one of four modes:
(1) flock=local. Locking is done locally only and no reference is made to
the server.
(2) flock=openafs. Byte-range locking is done locally only; whole-file
locking is done with reference to the server. Whole-file locks cannot
be upgraded unless the client holds an exclusive lock.
(3) flock=strict. Byte-range and whole-file locking both require a
sufficient whole-file lock on the server.
(4) flock=write. As strict, but the client always gets an exclusive
whole-file lock on the server.
Signed-off-by: David Howells <dhowells@redhat.com>
Add four more tracepoints:
(1) afs_make_fs_call1 - Split from afs_make_fs_call but takes a filename
to log also.
(2) afs_make_fs_call2 - Like the above but takes two filenames to log.
(3) afs_lookup - Log the result of doing a successful lookup, including a
negative result (fid 0:0).
(4) afs_get_tree - Log the set up of a volume for mounting.
It also extends the name buffer on the afs_edit_dir tracepoint to 24 chars
and puts quotes around the filename in the text representation.
Signed-off-by: David Howells <dhowells@redhat.com>
Implement sillyrename for AFS unlink and rename, using the NFS variant
implementation as a basis.
Note that the asynchronous file locking extender/releaser has to be
notified with a state change to stop it complaining if there's a race
between that and the actual file deletion.
A tracepoint, afs_silly_rename, is also added to note the silly rename and
the cleanup. The afs_edit_dir tracepoint is given some extra reason
indicators and the afs_flock_ev tracepoint is given a silly-delete file
lock cancellation indicator.
Signed-off-by: David Howells <dhowells@redhat.com>
Holding a file lock on an AFS file does not prevent it from being deleted
on the server, so we need to handle an error resulting from that when we
try setting, extending or releasing a lock.
Fix this by adding a "deleted" lock state and cancelling the lock extension
process for that file and aborting all waiters for the lock.
Fixes: 0fafdc9f88 ("afs: Fix file locking")
Reported-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Improve the content of directory check failure reports from:
kAFS: afs_dir_check_page(6d57): bad magic 1/2 is 0000
to dump more information about the individual blocks in a directory page.
Signed-off-by: David Howells <dhowells@redhat.com>
Add two tracepoints for monitoring AFS file locking. Firstly, add one that
follows the operational part:
echo 1 >/sys/kernel/debug/tracing/events/afs/afs_flock_op/enable
And add a second that more follows the event-driven part:
echo 1 >/sys/kernel/debug/tracing/events/afs/afs_flock_ev/enable
Individual file_lock structs seen by afs are tagged with debugging IDs that
are displayed in the trace log to make it easier to see what's going on,
especially as setting the first lock always seems to involve copying the
file_lock twice.
Signed-off-by: David Howells <dhowells@redhat.com>
Further fix the file locking in the afs filesystem client in a number of
ways, including:
(1) Don't submit the operation to obtain a lock from the server in a work
queue context, but rather do it in the process context of whoever
issued the requesting system call.
(2) The owner of the file_lock struct at the front of the pending_locks
queue now owns right to talk to the server.
(3) Write locks can be instantly granted if they don't overlap with any
other locks *and* we have a write lock on the server.
(4) In the event of an authentication/permission error, all other matching
pending locks requests are also immediately aborted.
(5) Properly use VFS core locks_lock_file_wait() to distribute the server
lock amongst local client locks, including waiting for the lock to
become available.
Test with:
sqlite3 /afs/.../scratch/billings.sqlite <<EOF
CREATE TABLE hosts (
hostname varchar(80),
shorthost varchar(80),
room varchar(30),
building varchar(30),
PRIMARY KEY(shorthost)
);
EOF
With the version of sqlite3 that I have, this should fail consistently with
EAGAIN, whether or not the program is straced (which introduces some delays
between lock syscalls).
Fixes: 0fafdc9f88 ("afs: Fix file locking")
Reported-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Fix AFS file locking to allow fine grained locks as some applications, such
as firefox, won't work if they can't take such locks on certain state files
- thereby preventing the use of kAFS to distribute a home directory.
Note that this cannot be made completely functional as the protocol only
has provision for whole-file locks, so there exists the possibility of a
process deadlocking itself by getting a partial read-lock on a file first
and then trying to get a non-overlapping write-lock - but we got the
server's read lock with the first lock, so we're now stuck.
OpenAFS solves this by just granting any partial-range lock directly
without consulting the server - and hoping there's no remote collision. I
want to implement that in a separate patch and it requires a bit more
thought.
Fixes: 8d6c554126b8 ("AFS: implement file locking")
Reported-by: Jonathan Billings <jsbillings@jsbillings.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Record the timestamp on the first reply DATA packet received in response to
a set- or extend-lock operation, then use this to calculate the time
remaining till the lock expires rather than using whatever time the
requesting process wakes up and finishes processing the operation as a
base.
Signed-off-by: David Howells <dhowells@redhat.com>
Split the call to afs_wait_for_call_to_complete() from afs_make_call() to
make it easier to handle asynchronous calls and to make it easier to
convert a synchronous call to an asynchronous one in future, for instance
when someone tries to interrupt an operation by pressing Ctrl-C.
Signed-off-by: David Howells <dhowells@redhat.com>
The in-kernel afs filesystem client counts the number of server-level
callback invalidation events (CB.InitCallBackState* RPC operations) that it
receives from the server. This is stored in cb_s_break in various
structures, including afs_server and afs_vnode.
If an inode is examined by afs_validate(), say, the afs_server copy is
compared, along with other break counters, to those in afs_vnode, and if
one or more of the counters do not match, it is considered that the
server's callback promise is broken. At points where this happens,
AFS_VNODE_CB_PROMISED is cleared to indicate that the status must be
refetched from the server.
afs_validate() issues an FS.FetchStatus operation to get updated metadata -
and based on the updated data_version may invalidate the pagecache too.
However, the break counters are also used to determine whether to note a
new callback in the vnode (which would set the AFS_VNODE_CB_PROMISED flag)
and whether to cache the permit data included in the YFSFetchStatus record
by the server.
The problem comes when the server sends us a CB.InitCallBackState op. The
first such instance doesn't cause cb_s_break to be incremented, but rather
causes AFS_SERVER_FL_NEW to be cleared - but thereafter, say some hours
after last use and all the volumes have been automatically unmounted and
the server has forgotten about the client[*], this *will* likely cause an
increment.
[*] There are other circumstances too, such as the server restarting or
needing to make space in its callback table.
Note that the server won't send us a CB.InitCallBackState op until we talk
to it again.
So what happens is:
(1) A mount for a new volume is attempted, a inode is created for the root
vnode and vnode->cb_s_break and AFS_VNODE_CB_PROMISED aren't set
immediately, as we don't have a nominated server to talk to yet - and
we may iterate through a few to find one.
(2) Before the operation happens, afs_fetch_status(), say, notes in the
cursor (fc.cb_break) the break counter sum from the vnode, volume and
server counters, but the server->cb_s_break is currently 0.
(3) We send FS.FetchStatus to the server. The server sends us back
CB.InitCallBackState. We increment server->cb_s_break.
(4) Our FS.FetchStatus completes. The reply includes a callback record.
(5) xdr_decode_AFSCallBack()/xdr_decode_YFSCallBack() check to see whether
the callback promise was broken by checking the break counter sum from
step (2) against the current sum.
This fails because of step (3), so we don't set the callback record
and, importantly, don't set AFS_VNODE_CB_PROMISED on the vnode.
This does not preclude the syscall from progressing, and we don't loop here
rechecking the status, but rather assume it's good enough for one round
only and will need to be rechecked next time.
(6) afs_validate() it triggered on the vnode, probably called from
d_revalidate() checking the parent directory.
(7) afs_validate() notes that AFS_VNODE_CB_PROMISED isn't set, so doesn't
update vnode->cb_s_break and assumes the vnode to be invalid.
(8) afs_validate() needs to calls afs_fetch_status(). Go back to step (2)
and repeat, every time the vnode is validated.
This primarily affects volume root dir vnodes. Everything subsequent to
those inherit an already incremented cb_s_break upon mounting.
The issue is that we assume that the callback record and the cached permit
information in a reply from the server can't be trusted after getting a
server break - but this is wrong since the server makes sure things are
done in the right order, holding up our ops if necessary[*].
[*] There is an extremely unlikely scenario where a reply from before the
CB.InitCallBackState could get its delivery deferred till after - at
which point we think we have a promise when we don't. This, however,
requires unlucky mass packet loss to one call.
AFS_SERVER_FL_NEW tries to paper over the cracks for the initial mount from
a server we've never contacted before, but this should be unnecessary.
It's also further insulated from the problem on an initial mount by
querying the server first with FS.GetCapabilities, which triggers the
CB.InitCallBackState.
Fix this by
(1) Remove AFS_SERVER_FL_NEW.
(2) In afs_calc_vnode_cb_break(), don't include cb_s_break in the
calculation.
(3) In afs_cb_is_broken(), don't include cb_s_break in the check.
Signed-off-by: David Howells <dhowells@redhat.com>
__pagevec_release() complains loudly if any page in the vector is still
locked. The pages need to be locked for generic_error_remove_page(), but
that function doesn't actually unlock them.
Unlock the pages afterwards.
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jonathan Billings <jsbillin@umich.edu>
Differentiate an abort due to an unmarshalling error from an abort due to
other errors, such as ENETUNREACH. It doesn't make sense to set abort code
RXGEN_*_UNMARSHAL in such a case, so use RX_USER_ABORT instead.
Signed-off-by: David Howells <dhowells@redhat.com>
__tracepoint_str cannot be const because the tracepoint_str
section is not read-only. Remove the stray const.
Cc: dhowells@redhat.com
Cc: viro@zeniv.linux.org.uk
Signed-off-by: Andi Kleen <ak@linux.intel.com>
get_seconds() has a limited range on 32-bit architectures and is
deprecated because of that. While AFS uses the same limits for
its inode timestamps on the wire protocol, let's just use the
simpler current_time() as we do for other file systems.
This will still zero out the 'tv_nsec' field of the timestamps
internally.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Check the state of the rxrpc call backing an afs call in each iteration of
the call wait loop in case the rxrpc call has already been terminated at
the rxrpc layer.
Interrupt the wait loop and mark the afs call as complete if the rxrpc
layer call is complete.
There were cases where rxrpc errors were not passed up to afs, which could
result in this loop waiting forever for an afs call to transition to
AFS_CALL_COMPLETE while the rx call was already complete.
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make rxrpc_kernel_check_life() pass back the life counter through the
argument list and return true if the call has not yet completed.
Suggested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The marshalling of AFS.StoreData, AFS.StoreData64 and YFS.StoreData64 calls
generated by ->setattr() ops for the purpose of expanding a file is
incorrect due to older documentation incorrectly describing the way the RPC
'FileLength' parameter is meant to work.
The older documentation says that this is the length the file is meant to
end up at the end of the operation; however, it was never implemented this
way in any of the servers, but rather the file is truncated down to this
before the write operation is effected, and never expanded to it (and,
indeed, it was renamed to 'TruncPos' in 2014).
Fix this by setting the position parameter to the new file length and doing
a zero-lengh write there.
The bug causes Xwayland to SIGBUS due to unexpected non-expansion of a file
it then mmaps. This can be tested by giving the following test program a
filename in an AFS directory:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/mman.h>
int main(int argc, char *argv[])
{
char *p;
int fd;
if (argc != 2) {
fprintf(stderr,
"Format: test-trunc-mmap <file>\n");
exit(2);
}
fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC);
if (fd < 0) {
perror(argv[1]);
exit(1);
}
if (ftruncate(fd, 0x140008) == -1) {
perror("ftruncate");
exit(1);
}
p = mmap(NULL, 4096, PROT_READ | PROT_WRITE,
MAP_SHARED, fd, 0);
if (p == MAP_FAILED) {
perror("mmap");
exit(1);
}
p[0] = 'a';
if (munmap(p, 4096) < 0) {
perror("munmap");
exit(1);
}
if (close(fd) < 0) {
perror("close");
exit(1);
}
exit(0);
}
Fixes: 31143d5d51 ("AFS: implement basic file write support")
Reported-by: Jonathan Billings <jsbillin@umich.edu>
Tested-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs mount infrastructure updates from Al Viro:
"The rest of core infrastructure; no new syscalls in that pile, but the
old parts are switched to new infrastructure. At that point
conversions of individual filesystems can happen independently; some
are done here (afs, cgroup, procfs, etc.), there's also a large series
outside of that pile dealing with NFS (quite a bit of option-parsing
stuff is getting used there - it's one of the most convoluted
filesystems in terms of mount-related logics), but NFS bits are the
next cycle fodder.
It got seriously simplified since the last cycle; documentation is
probably the weakest bit at the moment - I considered dropping the
commit introducing Documentation/filesystems/mount_api.txt (cutting
the size increase by quarter ;-), but decided that it would be better
to fix it up after -rc1 instead.
That pile allows to do followup work in independent branches, which
should make life much easier for the next cycle. fs/super.c size
increase is unpleasant; there's a followup series that allows to
shrink it considerably, but I decided to leave that until the next
cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits)
afs: Use fs_context to pass parameters over automount
afs: Add fs_context support
vfs: Add some logging to the core users of the fs_context log
vfs: Implement logging through fs_context
vfs: Provide documentation for new mount API
vfs: Remove kern_mount_data()
hugetlbfs: Convert to fs_context
cpuset: Use fs_context
kernfs, sysfs, cgroup, intel_rdt: Support fs_context
cgroup: store a reference to cgroup_ns into cgroup_fs_context
cgroup1_get_tree(): separate "get cgroup_root to use" into a separate helper
cgroup_do_mount(): massage calling conventions
cgroup: stash cgroup_root reference into cgroup_fs_context
cgroup2: switch to option-by-option parsing
cgroup1: switch to option-by-option parsing
cgroup: take options parsing into ->parse_monolithic()
cgroup: fold cgroup1_mount() into cgroup1_get_tree()
cgroup: start switching to fs_context
ipc: Convert mqueue fs to fs_context
proc: Add fs_context support to procfs
...
All users of VM_MAX_READAHEAD actually convert it to kbytes and then to
pages. Define the macro explicitly as (SZ_128K / PAGE_SIZE). This
simplifies the expression in every filesystem. Also rename the macro to
VM_READAHEAD_PAGES to properly convey its meaning. Finally remove unused
VM_MIN_READAHEAD
[akpm@linux-foundation.org: fix fs/io_uring.c, per Stephen]
Link: http://lkml.kernel.org/r/20181221144053.24318-1-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alter the AFS automounting code to create and modify an fs_context struct
when parameterising a new mount triggered by an AFS mountpoint rather than
constructing device name and option strings.
Also remove the cell=, vol= and rwpath options as they are then redundant.
The reason they existed is because the 'device name' may be derived
literally from a mountpoint object in the filesystem, so default cell and
parent-type information needed to be passed in by some other method from
the automount routines. The vol= option didn't end up being used.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Eric W. Biederman <ebiederm@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add fs_context support to the AFS filesystem, converting the parameter
parsing to store options there.
This will form the basis for namespace propagation over mountpoints within
the AFS model, thereby allowing AFS to be used in containers more easily.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When a cell with a volume location server list is added manually by
echoing the details into /proc/net/afs/cells, a record is added but the
flag saying it has been looked up isn't set.
This causes the VL server rotation code to wait forever, with the top of
/proc/pid/stack looking like:
afs_select_vlserver+0x3a6/0x6f3
afs_vl_lookup_vldb+0x4b/0x92
afs_create_volume+0x25/0x1b9
...
with the thread stuck in afs_start_vl_iteration() waiting for
AFS_CELL_FL_NO_LOOKUP_YET to be cleared.
Fix this by clearing AFS_CELL_FL_NO_LOOKUP_YET when setting up a record
if that record's details were supplied manually.
Fixes: 0a5143f2f8 ("afs: Implement VL server rotation")
Reported-by: Dave Botsch <dwb7@cornell.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's a race between afs_make_call() and afs_wake_up_async_call() in the
case that an error is returned from rxrpc_kernel_send_data() after it has
queued the final packet.
afs_make_call() will try and clean up the mess, but the call state may have
been moved on thereby causing afs_process_async_call() to also try and to
delete the call.
Fix this by:
(1) Getting an extra ref for an asynchronous call for the call itself to
hold. This makes sure the call doesn't evaporate on us accidentally
and will allow the call to be retained by the caller in a future
patch. The ref is released on leaving afs_make_call() or
afs_wait_for_call_to_complete().
(2) In the event of an error from rxrpc_kernel_send_data():
(a) Don't set the call state to AFS_CALL_COMPLETE until *after* the
call has been aborted and ended. This prevents
afs_deliver_to_call() from doing anything with any notifications
it gets.
(b) Explicitly end the call immediately to prevent further callbacks.
(c) Cancel any queued async_work and wait for the work if it's
executing. This allows us to be sure the race won't recur when we
change the state. We put the work queue's ref on the call if we
managed to cancel it.
(d) Put the call's ref that we got in (1). This belongs to us as long
as the call is in state AFS_CALL_CL_REQUESTING.
Fixes: 341f741f04 ("afs: Refcount the afs_call struct")
Signed-off-by: David Howells <dhowells@redhat.com>
Fix the refcounting of the authentication keys in the file locking code.
The vnode->lock_key member points to a key on which it expects to be
holding a ref, but it isn't always given an extra ref, however.
Fixes: 0fafdc9f88 ("afs: Fix file locking")
Signed-off-by: David Howells <dhowells@redhat.com>
A cb_interest record is not necessarily attached to the vnode on entry to
afs_validate(), which can cause an oops when we try to bring the vnode's
cb_s_break up to date in the default case (ie. no current callback promise
and the vnode has not been deleted).
Fix this by simply removing the line, as vnode->cb_s_break will be set when
needed by afs_register_server_cb_interest() when we next get a callback
promise from RPC call.
The oops looks something like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
...
RIP: 0010:afs_validate+0x66/0x250 [kafs]
...
Call Trace:
afs_d_revalidate+0x8d/0x340 [kafs]
? __d_lookup+0x61/0x150
lookup_dcache+0x44/0x70
? lookup_dcache+0x44/0x70
__lookup_hash+0x24/0xa0
do_unlinkat+0x11d/0x2c0
__x64_sys_unlink+0x23/0x30
do_syscall_64+0x4d/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: ae3b7361dc ("afs: Fix validation/callback interaction")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
A lock type of 0 is "LockRead", which makes the fileserver record an
unintentional read lock on the new file. This will cause problems
later on if the file is the subject of locking operations.
The correct default value should be -1 ("LockNone").
Fix the operation marshalling code to set the value and provide an enum to
symbolise the values whilst we're at it.
Fixes: 30062bd13e ("afs: Implement YFS support in the fs client")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with
memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Multiple filesystems open code lru_to_page(). Rectify this by moving
the macro from mm_inline (which is specific to lru stuff) to the more
generic mm.h header and start using the macro where appropriate.
No functional changes.
Link: http://lkml.kernel.org/r/20181129104810.23361-1-nborisov@suse.com
Link: https://lkml.kernel.org/r/20181129075301.29087-1-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Pankaj gupta <pagupta@redhat.com>
Acked-by: "Yan, Zheng" <zyan@redhat.com> [ceph]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is already done for us internally by the signal machinery.
[akpm@linux-foundation.org: fix fs/buffer.c]
Link: http://lkml.kernel.org/r/20181116002713.8474-7-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs fixes from Al Viro:
"Assorted fixes all over the place.
The iov_iter one is this cycle regression (splice from UDP triggering
WARN_ON()), the rest is older"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
afs: Use d_instantiate() rather than d_add() and don't d_drop()
afs: Fix missing net error handling
afs: Fix validation/callback interaction
iov_iter: teach csum_and_copy_to_iter() to handle pipe-backed ones
exportfs: do not read dentry after free
exportfs: fix 'passing zero to ERR_PTR()' warning
aio: fix failure to put the file pointer
sysv: return 'err' instead of 0 in __sysv_write_inode
Use d_instantiate() rather than d_add() and don't d_drop() in
afs_vnode_new_inode(). The dentry shouldn't be removed as it's not
changing its name.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
kAFS can be given certain network errors (EADDRNOTAVAIL, EHOSTDOWN and
ERFKILL) that it doesn't handle in its server/address rotation algorithms.
They cause the probing and rotation to abort immediately rather than
rotating.
Fix this by:
(1) Abstracting out the error prioritisation from the VL and FS rotation
algorithms into a common function and expand usage into the server
probing code.
When multiple errors are available, this code selects the one we'd
prefer to return.
(2) Add handling for EADDRNOTAVAIL, EHOSTDOWN and ERFKILL.
Fixes: 0fafdc9f88 ("afs: Fix file locking")
Fixes: 0338747d8454 ("afs: Probe multiple fileservers simultaneously")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When afs_validate() is called to validate a vnode (inode), there are two
unhandled cases in the fastpath at the top of the function:
(1) If the vnode is promised (AFS_VNODE_CB_PROMISED is set), the break
counters match and the data has expired, then there's an implicit case
in which the vnode needs revalidating.
This has no consequences since the default "valid = false" set at the
top of the function happens to do the right thing.
(2) If the vnode is not promised and it hasn't been deleted
(AFS_VNODE_DELETED is not set) then there's a default case we're not
handling in which the vnode is invalid. If the vnode is invalid, we
need to bring cb_s_break and cb_v_break up to date before we refetch
the status.
As a consequence, once the server loses track of the client
(ie. sufficient time has passed since we last sent it an operation),
it will send us a CB.InitCallBackState* operation when we next try to
talk to it. This calls afs_init_callback_state() which increments
afs_server::cb_s_break, but this then doesn't propagate to the
afs_vnode record.
The result being that every afs_validate() call thereafter sends a
status fetch operation to the server.
Clarify and fix this by:
(A) Setting valid in all the branches rather than initialising it at the
top so that the compiler catches where we've missed.
(B) Restructuring the logic in the 'promised' branch so that we set valid
to false if the callback is due to expire (or has expired) and so that
the final case is that the vnode is still valid.
(C) Adding an else-statement that ups cb_s_break and cb_v_break if the
promised and deleted cases don't match.
Fixes: c435ee3455 ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The life-checking function, which is used by kAFS to make sure that a call
is still live in the event of a pending signal, only samples the received
packet serial number counter; it doesn't actually provoke a change in the
counter, rather relying on the server to happen to give us a packet in the
time window.
Fix this by adding a function to force a ping to be transmitted.
kAFS then keeps track of whether there's been a stall, and if so, uses the
new function to ping the server, resetting the timeout to allow the reply
to come back.
If there's a stall, a ping and the call is *still* stalled in the same
place after another period, then the call will be aborted.
Fixes: bc5e3a546d ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Fixes: f4d15fb6f9 ("rxrpc: Provide functions for allowing cleaner handling of signals")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Send probes to all the unprobed fileservers in a fileserver list on all
addresses simultaneously in an attempt to find out the fastest route whilst
not getting stuck for 20s on any server or address that we don't get a
reply from.
This alleviates the problem whereby attempting to access a new server can
take a long time because the rotation algorithm ends up rotating through
all servers and addresses until it finds one that responds.
Signed-off-by: David Howells <dhowells@redhat.com>
In some circumstances, the callback interest pointer is NULL, so in such a
case we can't dereference it when checking to see if the callback is
broken. This causes an oops in some circumstances.
Fix this by replacing the function that worked out the aggregate break
counter with one that actually does the comparison, and then make that
return true (ie. broken) if there is no callback interest as yet (ie. the
pointer is NULL).
Fixes: 68251f0a68 ("afs: Fix whole-volume callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
Eliminate the address pointer from the address list cursor as it's
redundant (ac->addrs[ac->index] can be used to find the same address) and
address lists must be replaced rather than being rearranged, so is of
limited value.
Signed-off-by: David Howells <dhowells@redhat.com>
Provide an option to allow the file or volume location server cursor to be
dumped if the rotation routine falls off the end without managing to
contact a server.
Signed-off-by: David Howells <dhowells@redhat.com>
Implement support for talking to YFS-variant fileservers in the cache
manager and the filesystem client. These implement upgraded services on
the same port as their AFS services.
YFS fileservers provide expanded capabilities over AFS.
Signed-off-by: David Howells <dhowells@redhat.com>
Expand fields in various data structures to support the expanded
information that YFS is capable of returning.
Signed-off-by: David Howells <dhowells@redhat.com>
Get the target vnode in afs_rmdir() and validate it before we attempt the
deletion, The vnode pointer will be passed through to the delivery function
in a later patch so that the delivery function can mark it deleted.
Signed-off-by: David Howells <dhowells@redhat.com>
Joe Gorse