Commit Graph

69 Commits

Author SHA1 Message Date
Grygorii Strashko 4717f13373 genirq/PM: Restore system wake up from chained interrupts
Commit e509bd7da1 ("genirq: Allow migration of chained interrupts
by installing default action") breaks PCS wake up IRQ behaviour on
TI OMAP based platforms (dra7-evm).

TI OMAP IRQ wake up configuration:
GIC-irqchip->PCM_IRQ
  |- omap_prcm_register_chain_handler
     |- PRCM-irqchip -> PRCM_IO_IRQ
        |- pcs_irq_chain_handler
           |- pinctrl-irqchip -> PCS_uart1_wakeup_irq

This happens because IRQ PM code (irq/pm.c) is expected to ignore
chained interrupts by default:
  static bool suspend_device_irq(struct irq_desc *desc)
  {
	if (!desc->action || desc->no_suspend_depth)
		return false;
 - it's expected !desc->action = true for chained interrupts;

but, after above change, all chained interrupt descriptors will
have default action handler installed - chained_action.
As result, chained interrupts will be silently disabled during system
suspend.

Hence, fix it by introducing helper function irq_desc_is_chained() and
use it in suspend_device_irq() for chained interrupts identification
and skip them, once detected.

Fixes: e509bd7da1 ("genirq: Allow migration of chained interrupts..")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: <nsekhar@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Tony Lindgren <tony@atomide.com>
Link: http://lkml.kernel.org/r/1447149492-20699-1-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-10 09:11:31 -05:00
Thomas Gleixner e50226b4b8 Merge branch 'linus' into irq/core
Bring in upstream updates for patches which depend on them
2015-10-13 19:00:14 +02:00
Mika Westerberg e509bd7da1 genirq: Allow migration of chained interrupts by installing default action
When a CPU is offlined all interrupts that have an action are migrated to
other still online CPUs. However, if the interrupt has chained handler
installed this is not done. Chained handlers are used by GPIO drivers which
support interrupts, for instance.

When the affinity is not corrected properly we end up in situation where
most interrupts are not arriving to the online CPUs anymore. For example on
Intel Braswell system which has SD-card card detection signal connected to
a GPIO the IO-APIC routing entries look like below after CPU1 is offlined:

  pin30, enabled , level, low , V(52), IRR(0), S(0), logical , D(03), M(1)
  pin31, enabled , level, low , V(42), IRR(0), S(0), logical , D(03), M(1)
  pin32, enabled , level, low , V(62), IRR(0), S(0), logical , D(03), M(1)
  pin5b, enabled , level, low , V(72), IRR(0), S(0), logical , D(03), M(1)

The problem here is that the destination mask still contains both CPUs even
if CPU1 is already offline. This means that the IO-APIC still routes
interrupts to the other CPU as well.

We solve the problem by providing a default action for chained interrupts.
This action allows the migration code to correct affinity (as it finds
desc->action != NULL).

Also make the default action handler to emit a warning if for some reason a
chained handler ends up calling it.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Link: http://lkml.kernel.org/r/1444039935-30475-1-git-send-email-mika.westerberg@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-09 22:47:27 +02:00
Ben Hutchings 95c2b17534 genirq: Fix race in register_irq_proc()
Per-IRQ directories in procfs are created only when a handler is first
added to the irqdesc, not when the irqdesc is created.  In the case of
a shared IRQ, multiple tasks can race to create a directory.  This
race condition seems to have been present forever, but is easier to
hit with async probing.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Link: http://lkml.kernel.org/r/1443266636.2004.2.camel@decadent.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
2015-10-01 12:18:13 +02:00
Jiang Liu 9df872faa7 genirq: Move field 'affinity' from irq_data into irq_common_data
Irq affinity mask is per-irq instead of per irqchip, so move it into
struct irq_common_data.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: http://lkml.kernel.org/r/1433303281-27688-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-16 15:46:49 +02:00
Jiang Liu 6783011b48 genirq: Introduce helper function irq_data_get_node()
Introduce helper function irq_data_get_node() and variants thereof to
hide struct irq_data implementation details.

Convert the core code to use them.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: http://lkml.kernel.org/r/1433145945-789-5-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12 16:54:21 +02:00
Tejun Heo c1d7f03fdd irq: use %*pb[l] to print bitmaps including cpumasks and nodemasks
printk and friends can now format bitmaps using '%*pb[l]'.  cpumask
and nodemask also provide cpumask_pr_args() and nodemask_pr_args()
respectively which can be used to generate the two printf arguments
necessary to format the specified cpu/nodemask.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 21:21:38 -08:00
Thomas Gleixner c291ee6221 genirq: Prevent proc race against freeing of irq descriptors
Since the rework of the sparse interrupt code to actually free the
unused interrupt descriptors there exists a race between the /proc
interfaces to the irq subsystem and the code which frees the interrupt
descriptor.

CPU0				CPU1
				show_interrupts()
				  desc = irq_to_desc(X);
free_desc(desc)
  remove_from_radix_tree();
  kfree(desc);
				  raw_spinlock_irq(&desc->lock);

/proc/interrupts is the only interface which can actively corrupt
kernel memory via the lock access. /proc/stat can only read from freed
memory. Extremly hard to trigger, but possible.

The interfaces in /proc/irq/N/ are not affected by this because the
removal of the proc file is serialized in procfs against concurrent
readers/writers. The removal happens before the descriptor is freed.

For architectures which have CONFIG_SPARSE_IRQ=n this is a non issue
as the descriptor is never freed. It's merely cleared out with the irq
descriptor lock held. So any concurrent proc access will either see
the old correct value or the cleared out ones.

Protect the lookup and access to the irq descriptor in
show_interrupts() with the sparse_irq_lock.

Provide kstat_irqs_usr() which is protecting the lookup and access
with sparse_irq_lock and switch /proc/stat to use it.

Document the existing kstat_irqs interfaces so it's clear that the
caller needs to take care about protection. The users of these
interfaces are either not affected due to SPARSE_IRQ=n or already
protected against removal.

Fixes: 1f5a5b87f7 "genirq: Implement a sane sparse_irq allocator"
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
2014-12-13 13:33:07 +01:00
Chema Gonzalez bab5c790cc genirq: procfs: Make smp_affinity values go+r
Includes:
- /proc/irq/default_smp_affinity
- /proc/irq/*/affinity_hint
- /proc/irq/*/smp_affinity
- /proc/irq/*/smp_affinity_list

Users can distill the same information by reading /proc/interrupts.

Signed-off-by: Chema Gonzalez <chema@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Link: http://lkml.kernel.org/r/1394765455-1217-1-git-send-email-chema@google.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-19 12:34:29 +01:00
Grant Likely c12d2f42a9 irqdomain: Include hwirq number in /proc/interrupts
Add the hardware interrupt number to the output of /proc/interrupts.
It is often important to have access to the hardware interrupt number because
it identifies exactly how an interrupt signal is wired up to the interrupt
controller.  This is especially important when using irq_domains since irq
numbers get dynamically allocated in that case, and have no relation to the
actual hardware number.

Note: This output is currently conditional on whether or not the irq_domain
pointer is set; however hwirq could still be used without irq_domain.  It
may be worthwhile to always output the hwirq number regardless of the
domain pointer.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Olof Johansson <olof@lixom.net>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2013-06-24 14:02:42 +01:00
David Howells a8ca16ea7b proc: Supply a function to remove a proc entry by PDE
Supply a function (proc_remove()) to remove a proc entry (and any subtree
rooted there) by proc_dir_entry pointer rather than by name and (optionally)
root dir entry pointer.  This allows us to eliminate all remaining pde->name
accesses outside of procfs.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Grant Likely <grant.likely@linaro.or>
cc: linux-acpi@vger.kernel.org
cc: openipmi-developer@lists.sourceforge.net
cc: devicetree-discuss@lists.ozlabs.org
cc: linux-pci@vger.kernel.org
cc: netdev@vger.kernel.org
cc: netfilter-devel@vger.kernel.org
cc: alsa-devel@alsa-project.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-01 17:29:46 -04:00
Al Viro d9dda78bad procfs: new helper - PDE_DATA(inode)
The only part of proc_dir_entry the code outside of fs/proc
really cares about is PDE(inode)->data.  Provide a helper
for that; static inline for now, eventually will be moved
to fs/proc, along with the knowledge of struct proc_dir_entry
layout.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:32 -04:00
Al Viro 496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Yinghai Lu def945eeb9 irq: Remove smp_affinity_list when unregister irq proc
commit 4b06042(bitmap, irq: add smp_affinity_list interface to
/proc/irq) causes the following warning:

[  274.239500] WARNING: at fs/proc/generic.c:850 remove_proc_entry+0x24c/0x27a()
[  274.251761] remove_proc_entry: removing non-empty directory 'irq/184',
    	       leaking at least 'smp_affinity_list'

Remove the new file in the exit path.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Mike Travis <travis@sgi.com>
Link: http://lkml.kernel.org/r/4DDDE094.6050505@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-26 13:15:28 +02:00
Mike Travis 4b060420a5 bitmap, irq: add smp_affinity_list interface to /proc/irq
Manually adjusting the smp_affinity for IRQ's becomes unwieldy when the
cpu count is large.

Setting smp affinity to cpus 256 to 263 would be:

	echo 000000ff,00000000,00000000,00000000,00000000,00000000,00000000,00000000 > smp_affinity

instead of:

	echo 256-263 > smp_affinity_list

Think about what it looks like for cpus around say, 4088 to 4095.

We already have many alternate "list" interfaces:

/sys/devices/system/cpu/cpuX/indexY/shared_cpu_list
/sys/devices/system/cpu/cpuX/topology/thread_siblings_list
/sys/devices/system/cpu/cpuX/topology/core_siblings_list
/sys/devices/system/node/nodeX/cpulist
/sys/devices/pci***/***/local_cpulist

Add a companion interface, smp_affinity_list to use cpu lists instead of
cpu maps.  This conforms to other companion interfaces where both a map
and a list interface exists.

This required adding a bitmap_parselist_user() function in a manner
similar to the bitmap_parse_user() function.

[akpm@linux-foundation.org: make __bitmap_parselist() static]
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:45 -07:00
Geert Uytterhoeven 94b2c363dc genirq: Fix typo CONFIG_GENIRC_IRQ_SHOW_LEVEL
commit ab7798ffcf ("genirq: Expand generic
show_interrupts()") added the Kconfig option GENERIC_IRQ_SHOW_LEVEL to
accomodate PowerPC, but this doesn't actually enable the functionality due
to a typo in the #ifdef check.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linux/PPC Development <linuxppc-dev@lists.ozlabs.org>
Link: http://lkml.kernel.org/r/%3Calpine.DEB.2.00.1104302251370.19068%40ayla.of.borg%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-02 21:16:37 +02:00
Thomas Gleixner a6e120ed42 alpha: Use generic show_interrupts()
The only subtle difference is that alpha uses ACTUAL_NR_IRQS and
prints the IRQF_DISABLED flag.

Change the generic implementation to deal with ACTUAL_NR_IRQS if
defined.

The IRQF_DISABLED printing is pointless, as we nowadays run all
interrupts with irqs disabled.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:47:58 +02:00
Thomas Gleixner ab7798ffcf genirq: Expand generic show_interrupts()
Some archs want to print extra information for certain irq_chips which
is per irq and not per chip. Allow them to provide a chip callback to
print the chip name and the extra information.

PowerPC wants to print the LEVEL/EDGE type information. Make it configurable.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-25 17:04:20 +01:00
Thomas Gleixner ee0401ec11 genirq: show_interrupts: Check desc->name before printing it blindly
desc->name is not required and not used by all architectures.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-17 15:52:19 +01:00
Thomas Gleixner bce43032ad genirq: Reuse existing can set affinty check
Add a !desc check while at it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:20 +01:00
Thomas Gleixner f230b6d5c4 genirq: Add IRQ_MOVE_PENDING to irq_data.state
chip implementations need to know about it. Keep status in sync until
all users are fixed. 

Accessor function: irqd_is_setaffinity_pending(irqdata)

Coders who access them directly will be tracked down and slapped with
stinking trouts.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:18 +01:00
Thomas Gleixner c78b9b65fa genirq: Implement generic irq_show_interrupts()
All archs implement show_interrupts() in more or less the same
way. That's tons of duplicated code with different bugs with no
value. Implement a generic version and deprecate show_interrupts()

Unfortunately we need some ifdeffery for !GENERIC_HARDIRQ archs.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:13 +01:00
Thomas Gleixner 3b8249e759 genirq: Do not copy affinity before set
While rumaging through arch code I found that there are a few
workarounds which deal with the fact that the initial affinity setting
from request_irq() copies the mask into irq_data->affinity before the
chip code is called. In the normal path we unconditionally copy the
mask when the chip code returns 0.

Copy after the code is called and add a return code
IRQ_SET_MASK_OK_NOCOPY for the chip functions, which prevents the
copy. That way we see the real mask when the chip function decided to
truncate it further as some arches do. IRQ_SET_MASK_OK is 0, which is
the current behaviour.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19 12:58:07 +01:00
Kenji Kaneshige 25c9170ed6 genirq: Fix incorrect proc spurious output
Since commit a1afb637(switch /proc/irq/*/spurious to seq_file) all
/proc/irq/XX/spurious files show the information of irq 0.

Current irq_spurious_proc_open() passes on NULL as the 3rd argument,
which is used as an IRQ number in irq_spurious_proc_show(), to the
single_open(). Because of this, all the /proc/irq/XX/spurious file
shows IRQ 0 information regardless of the IRQ number.

To fix the problem, irq_spurious_proc_open() must pass on the
appropreate data (IRQ number) to single_open().

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Reviewed-by: Yong Zhang <yong.zhang0@gmail.com>
LKML-Reference: <4CF4B778.90604@jp.fujitsu.com>
Cc: stable@kernel.org [2.6.33+]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-01 08:44:26 +01:00
Thomas Gleixner 13bfe99e09 genirq: Prepare proc for real sparse irq support
/proc/irq never removes any entries, but when irq descriptors can be
freed for real this is necessary. Otherwise we'd reference a freed
descriptor in /proc/irq/N

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12 16:39:07 +02:00
Thomas Gleixner c96b3b3c44 genirq: Provide compat handling for chip->set_affinity()
Wrap the old chip function set_affinity() until the migration is
complete and the old chip functions are removed.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100927121842.732894108@linutronix.de>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04 12:43:46 +02:00
Thomas Gleixner 6b8ff3120c genirq: Convert core code to irq_data
Convert all references in the core code to orq, chip, handler_data,
chip_data, msi_desc, affinity to irq_data.*

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04 12:36:26 +02:00
Peter P Waskiewicz Jr 4308ad8011 genirq: Clear CPU mask in affinity_hint when none is provided
When an interrupt is disabled and torn down, the CPU mask returned
through affinity_hint right now is all CPUs. Also, for drivers that
don't provide an affinity_hint mask, this can be misleading. There
should be no hint at all, meaning an empty CPU mask.

[ tglx: use zalloc_cpumask_var instead of clearing it under the lock ]

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Cc: davem@davemloft.net
Cc: arjan@linux.jf.intel.com
Cc: bhutchings@solarflare.com
LKML-Reference: <20100505205638.5426.87189.stgit@ppwaskie-hc2.jf.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-05-12 11:23:34 +02:00
Peter P Waskiewicz Jr e7a297b0d7 genirq: Add CPU mask affinity hint
This patch adds a cpumask affinity hint to the irq_desc structure,
along with a registration function and a read-only proc entry for each
interrupt.

This affinity_hint handle for each interrupt can be used by underlying
drivers that need a better mechanism to control interrupt affinity.
The underlying driver can register a cpumask for the interrupt, which
will allow the driver to provide the CPU mask for the interrupt to
anything that requests it.  The intent is to extend the userspace
daemon, irqbalance, to help hint to it a preferred CPU mask to balance
the interrupt into.

[ tglx: Fixed compile warnings, added WARN_ON, made SMP only ]

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Cc: davem@davemloft.net
Cc: arjan@linux.jf.intel.com
Cc: bhutchings@solarflare.com
LKML-Reference: <20100430214445.3992.41647.stgit@ppwaskie-hc2.jf.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-05-03 11:50:57 +02:00
Thomas Gleixner 7c7145f6ac Merge branch 'linus' into irq/core
Reason: Get the upstream IRQF_DISABLED related changes.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-04-13 14:12:17 +02:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Dimitri Sivanich 92d6b71ab9 genirq: Expose irq_desc->node in proc/irq
Expose irq_desc->node as /proc/irq/*/node.

This file provides device hardware locality information for apps
desiring to include hardware locality in irq mapping decisions.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-24 14:10:03 +01:00
Thomas Gleixner 239007b844 genirq: Convert irq_desc.lock to raw_spinlock
Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-12-14 23:55:33 +01:00
Thomas Gleixner 34769945f7 genirq: Fix spurious irq seqfile conversion
single_open data argument must be PDE(inode)->data instead of NULL
otherwise seq_file->private is always NULL and we always read the
spurious data of irq 0.

Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-11-20 11:55:26 +01:00
Alexey Dobriyan a1afb6371b genirq: switch /proc/irq/*/spurious to seq_file
[ tglx: compacted it a bit ]

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
LKML-Reference: <20090828181743.GA14050@x200.localdomain>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-11-18 12:50:51 +01:00
Cyrill Gorcunov c82a43d40b irq: Do not attempt to create subdirectories if /proc/irq/<irq> failed
If a parent directory (ie /proc/irq/<irq>) could not be created
we should not attempt to create subdirectories. Otherwise it
would lead that "smp_affinity" and "spurious" entries are may be
registered under /proc root instead of a proper place.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20091026202811.GD5321@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-08 13:14:22 +01:00
Mike Travis 7f7ace0cda cpumask: update irq_desc to use cpumask_var_t
Impact: reduce memory usage, use new cpumask API.

Replace the affinity and pending_masks with cpumask_var_t's.  This adds
to the significant size reduction done with the SPARSE_IRQS changes.

The added functions (init_alloc_desc_masks & init_copy_desc_masks) are
in the include file so they can be inlined (and optimized out for the
!CONFIG_CPUMASKS_OFFSTACK case.)  [Naming chosen to be consistent with
the other init*irq functions, as well as the backwards arg declaration
of "from, to" instead of the more common "to, from" standard.]

Includes a slight change to the declaration of struct irq_desc to embed
the pending_mask within ifdef(CONFIG_SMP) to be consistent with other
references, and some small changes to Xen.

Tested: sparse/non-sparse/cpumask_offstack/non-cpumask_offstack/nonuma/nosmp on x86_64

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: virtualization@lists.osdl.org
Cc: xen-devel@lists.xensource.com
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
2009-01-11 19:12:46 +01:00
Ingo Molnar 6bdf197b04 ia64: cpumask fix for is_affinity_mask_valid()
Impact: build fix on ia64

ia64's default_affinity_write() still had old cpumask_t usage:

 /home/mingo/tip/kernel/irq/proc.c: In function `default_affinity_write':
 /home/mingo/tip/kernel/irq/proc.c:114: error: incompatible type for argument 1 of `is_affinity_mask_valid'
 make[3]: *** [kernel/irq/proc.o] Error 1
 make[3]: *** Waiting for unfinished jobs....

update it to cpumask_var_t.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-03 18:59:33 +01:00
Rusty Russell d036e67b40 cpumask: convert kernel/irq
Impact: Reduce stack usage, use new cpumask API.  ALPHA mod!

Main change is that irq_default_affinity becomes a cpumask_var_t, so
treat it as a pointer (this effects alpha).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-01-01 10:12:26 +10:30
Rusty Russell 2ca1a61583 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	arch/x86/kernel/io_apic.c
2008-12-31 23:05:57 +10:30
Rusty Russell 0de26520c7 cpumask: make irq_set_affinity() take a const struct cpumask
Impact: change existing irq_chip API

Not much point with gentle transition here: the struct irq_chip's
setaffinity method signature needs to change.

Fortunately, not widely used code, but hits a few architectures.

Note: In irq_select_affinity() I save a temporary in by mangling
irq_desc[irq].affinity directly.  Ingo, does this break anything?

(Folded in fix from KOSAKI Motohiro)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Acked-by: Ingo Molnar <mingo@redhat.com>
Cc: ralf@linux-mips.org
Cc: grundler@parisc-linux.org
Cc: jeremy@xensource.com
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
2008-12-13 21:20:26 +10:30
Rusty Russell 29c0177e6a cpumask: change cpumask_scnprintf, cpumask_parse_user, cpulist_parse, and cpulist_scnprintf to take pointers.
Impact: change calling convention of existing cpumask APIs

Most cpumask functions started with cpus_: these have been replaced by
cpumask_ ones which take struct cpumask pointers as expected.

These four functions don't have good replacement names; fortunately
they're rarely used, so we just change them over.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: paulus@samba.org
Cc: mingo@redhat.com
Cc: tony.luck@intel.com
Cc: ralf@linux-mips.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: cl@linux-foundation.org
Cc: srostedt@redhat.com
2008-12-13 21:20:25 +10:30
Yinghai Lu 0b8f1efad3 sparse irq_desc[] array: core kernel and x86 changes
Impact: new feature

Problem on distro kernels: irq_desc[NR_IRQS] takes megabytes of RAM with
NR_CPUS set to large values. The goal is to be able to scale up to much
larger NR_IRQS value without impacting the (important) common case.

To solve this, we generalize irq_desc[NR_IRQS] to an (optional) array of
irq_desc pointers.

When CONFIG_SPARSE_IRQ=y is used, we use kzalloc_node to get irq_desc,
this also makes the IRQ descriptors NUMA-local (to the site that calls
request_irq()).

This gets rid of the irq_cfg[] static array on x86 as well: irq_cfg now
uses desc->chip_data for x86 to store irq_cfg.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 14:31:51 +01:00
Thomas Gleixner f6d87f4bd2 genirq: keep affinities set from userspace across free/request_irq()
Impact: preserve user-modified affinities on interrupts

Kumar Galak noticed that commit
1840475676 (genirq: Expose default irq
affinity mask (take 3))

overrides an already set affinity setting across a free /
request_irq(). Happens e.g. with ifdown/ifup of a network device.

Change the logic to mark the affinities as set and keep them
intact. This also fixes the unlocked access to irq_desc in
irq_select_affinity() when called from irq_affinity_proc_write()

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-09 22:23:49 +01:00
roel kluin 3786fc710c irq: make variable static
This variable is only used in the source file, so make it static.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-22 07:37:17 +02:00
Thomas Gleixner d3c60047bd genirq: cleanup the sparseirq modifications
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16 16:53:29 +02:00
Yinghai Lu 2c6927a38f irq: replace loop with nr_irqs with for_each_irq_desc
There are a handful of loops that go from 0 to nr_irqs and use
get_irq_desc() on them. These would allocate all the irq_desc
entries, regardless of the need for them.

Use the smarter for_each_irq_desc() iterator that will only iterate
over the present ones.

v2: make sure arch without GENERIC_HARDIRQS work too

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:52:33 +02:00
Yinghai Lu 08678b0841 generic: sparse irqs: use irq_desc() together with dyn_array, instead of irq_desc[]
add CONFIG_HAVE_SPARSE_IRQ to for use condensed array.
Get rid of irq_desc[] array assumptions.

Preallocate 32 irq_desc, and irq_desc() will try to get more.

( No change in functionality is expected anywhere, except the odd build
  failure where we missed a code site or where a crossing commit itroduces
  new irq_desc[] usage. )

v2: according to Eric, change get_irq_desc() to irq_desc()

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:52:29 +02:00
Yinghai Lu 85c0f90978 irq: introduce nr_irqs
at this point nr_irqs is equal NR_IRQS

convert a few easy users from NR_IRQS to dynamic nr_irqs.

v2: according to Eric, we need to take care of arch without generic_hardirqs

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:52:05 +02:00
Alexey Dobriyan f18e439d10 genirq: switch /proc/irq/*/smp_affinity et al to seqfiles
Switch /proc/irq/*/smp_affinity , /proc/irq/default_smp_affinity to
seq_files.

cat(1) reads with 1024 chunks by default, with high enough NR_CPUS, there
will be -EINVAL.

As side effect, there are now two less users of the ->read_proc interface.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12 16:07:30 -07:00