Both ceph_osdc_alloc_request() and ceph_osdc_build_request() are
provided an array of ceph osd request operations. Rather than just
passing the number of operations in the array, the caller is
required append an additional zeroed operation structure to signal
the end of the array.
All callers know the number of operations at the time these
functions are called, so drop the silly zero entry and supply that
number directly. As a result, get_num_ops() is no longer needed.
This also means that ceph_osdc_alloc_request() never uses its ops
argument, so that can be dropped.
Also rbd_create_rw_ops() no longer needs to add one to reserve room
for the additional op.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add a num_op parameter to rbd_do_request() and rbd_req_sync_op() to
indicate the number of entries in the array. The callers of these
functions always know how many entries are in the array, so just
pass that information down.
This is in anticipation of eliminating the extra zero-filled entry
in these ops arrays.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Only one of the two callers of ceph_osdc_alloc_request() provides
page or bio data for its payload. And essentially all that function
was doing with those arguments was assigning them to fields in the
osd request structure.
Simplify ceph_osdc_alloc_request() by having the caller take care of
making those assignments
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The only thing ceph_osdc_alloc_request() really does with the
flags value it is passed is assign it to the newly-created
osd request structure. Do that in the caller instead.
Both callers subsequently call ceph_osdc_build_request(), so have
that function (instead of ceph_osdc_alloc_request()) issue a warning
if a request comes through with neither the read nor write flags set.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The osdc parameter to ceph_calc_raw_layout() is not used, so get rid
of it. Consequently, the corresponding parameter in calc_layout()
becomes unused, so get rid of that as well.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
A snapshot id must be provided to ceph_calc_raw_layout() even though
it is not needed at all for calculating the layout.
Where the snapshot id *is* needed is when building the request
message for an osd operation.
Drop the snapid parameter from ceph_calc_raw_layout() and pass
that value instead in ceph_osdc_build_request().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The len argument to ceph_osdc_build_request() is set up to be
passed by address, but that function never updates its value
so there's no need to do this. Tighten up the interface by
passing the length directly.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
For some reason, the snapid field of the osd request header is
explicitly set to CEPH_NOSNAP in rbd_do_request(). Just a few lines
later--with no code that would access this field in between--a call
is made to ceph_calc_raw_layout() passing the snapid provided to
rbd_do_request(), which encodes the snapid value it is provided into
that field instead.
In other words, there is no need to fill in CEPH_NOSNAP, and doing
so suggests it might be necessary. Don't do that any more.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The snapc and snapid parameters to rbd_req_sync_op() always take
the values NULL and CEPH_NOSNAP, respectively. So just get rid
of them and use those values where needed.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
All callers of rbd_req_sync_exec() pass CEPH_OSD_FLAG_READ as their
flags argument. Delete that parameter and use CEPH_OSD_FLAG_READ
within the function. If we find a need to support write operations
we can add it back again.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is only one caller of rbd_req_sync_read(), and it passes
CEPH_NOSNAP as the snapshot id argument. Delete that parameter
and just use CEPH_NOSNAP within the function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The last two parameters to ceph_osd_build_request() describe the
object id, but the values passed always come from the osd request
structure whose address is also provided. Get rid of those last
two parameters.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Pull a block of code that initializes the layout structure in an osd
request into its own function so it can be reused.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Right now we get the snapshot context for an rbd image (under
protection of the header semaphore) for every request processed.
There's no need to get the snap context if we're doing a read,
so avoid doing so in that case.
Note that we no longer need to hold the header semaphore to
check the rbd_dev's existence flag.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The rbd_device->exists field can be updated asynchronously, changing
from set to clear if a mapped snapshot disappears from the base
image's snapshot context.
Currently, value of the "exists" flag is only read and modified
under protection of the header semaphore, but that will change with
the next patch. Making it atomic ensures this won't be a problem
because the a the non-existence of device will be immediately known.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Now that a big hunk in the middle of rbd_rq_fn() has been moved
into its own routine we can simplify it a little more.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Only one of the three callers of rbd_do_request() provide a
collection structure to aggregate status.
If an error occurs in rbd_do_request(), have the caller
take care of calling rbd_coll_end_req() if necessary in
that one spot.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In rbd_rq_fn(), requests are fetched from the block layer and each
request is processed, looping through the request's list of bio's
until they've all been consumed.
Separate the handling for a single request into its own function to
make it a bit easier to see what's going on.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The result field in a ceph osd reply header is a signed 32-bit type,
but rbd code often casually uses int to represent it.
The following changes the types of variables that handle this result
value to be "s32" instead of "int" to be completely explicit about
it. Only at the point we pass that result to __blk_end_request()
does the type get converted to the plain old int defined for that
interface.
There is almost certainly no binary impact of this change, but I
prefer to show the exact size and signedness of the value since we
know it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
There are spots where a ceph_osds_request pointer variable is given
the name "req". Since we're dealing with (at least) three types of
requests (block layer, rbd, and osd), I find this slightly
distracting.
Change such instances to use "osd_req" consistently to make the
abstraction represented a little more obvious.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There are two names used for items of rbd_request structure type:
"req" and "req_data". The former name is also used to represent
items of pointers to struct ceph_osd_request.
Change all variables that have these names so they are instead
called "rbd_req" consistently.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Josh suggested adding warnings to this function to help users
diagnose problems.
Other than memory allocatino errors, there are two places where
errors can be returned. Both represent problems that should
have been caught earlier, and as such might well have been
handled with BUG_ON() calls. But if either ever did manage to
happen, it will be reported.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add a warning in bio_chain_clone_range() to help a user determine
what exactly might have led to a failure. There is only one; please
say something if you disagree with the following reasoning.
There are three places this can return abnormally:
- Initially, if there is nothing to clone. It turns out that
right now this cannot happen anyway. The test is in place
because the code below it doesn't work if those conditions
don't hold. As such they could be assertions but since I can
return a null to indicate an error I just do that instead.
I have not added a warning here because it won't happen.
- While processing bio's, if none remain but there are supposed
to be more bytes to clone. Here I have added a warning.
- If bio_clone_range() returns a null pointer. That function
will have already produced a warning (at least the first
time, via WARN_ON_ONCE()) to distinguish the cause of the
error. The only exception is memory exhaustion, and I'd
rather not pepper the code with warnings in all those spots.
So no warning is added in that place.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Tell the user (via dmesg) what was wrong with the arguments provided
via /sys/bus/rbd/add.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Define a new function rbd_warn() that produces a boilerplate warning
message, identifying in the resulting message the affected rbd
device in the best way available. Use it in a few places that now
use pr_warning().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This replaces two kmalloc()/memcpy() combinations with a single
call to kmemdup().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: David Zafman <david.zafman@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is no real benefit to keeping the length of an image id, so
get rid of it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: David Zafman <david.zafman@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There may have been a benefit to hanging on to the length of an
image name before, but there is really none now. The only time it's
used is when probing for rbd images, so we can just compute the
length then.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: David Zafman <david.zafman@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
I promised Josh I would document whether there were any restrictions
needed for accessing fields of an rbd_spec structure. This adds a
big block of comments that documents the structure and how it is
used--including the fact that we don't attempt to synchronize access
to it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: David Zafman <david.zafman@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The functions rbd_get_dev() and rbd_put_dev() are trivial wrappers
that add no value, and their existence suggests they may do more
than what they do.
Get rid of them.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
ENOTSUPP is not a standard errno (it shows up as "Unknown error 524"
in an error message). This is what was getting produced when the
the local rbd code does not implement features required by a
discovered rbd image.
Change the error code returned in this case to ENXIO.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
RBD_MAX_SEG_NAME_LEN represents the maximum length of an rbd object
name (i.e., one of the objects providing storage backing an rbd
image).
Another symbol, MAX_OBJ_NAME_SIZE, is used in the osd client code to
define the maximum length of any object name in an osd request.
Right now they disagree, with RBD_MAX_SEG_NAME_LEN being too big.
There's no real benefit at this point to defining the rbd object
name length limit separate from any other object name, so just
get rid of RBD_MAX_SEG_NAME_LEN and use MAX_OBJ_NAME_SIZE in its
place.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
There is no check in rbd_remove() to see if anybody holds open the
image being removed. That's not cool.
Add a simple open count that goes up and down with opens and closes
(releases) of the device, and don't allow an rbd image to be removed
if the count is non-zero.
Protect the updates of the open count value with ctl_mutex to ensure
the underlying rbd device doesn't get removed while concurrently
being opened.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
When a layered rbd image has a parent, that parent is identified
only by its pool id, image id, and snapshot id. Images that have
been mapped also record *names* for those three id's.
Add code to look up these names for parent images so they match
mapped images more closely. Skip doing this for an image if it
already has its pool name defined (this will be the case for images
mapped by the user).
It is possible that an the name of a parent image can't be
determined, even if the image id is valid. If this occurs it
does not preclude correct operation, so don't treat this as
an error.
On the other hand, defined pools will always have both an id and a
name. And any snapshot of an image identified as a parent for a
clone image will exist, and will have a name (if not it indicates
some other internal error). So treat failure to get these bits
of information as errors.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add support for getting the the information identifying the parent
image for rbd images that have them. The child image holds a
reference to its parent image specification structure. Create a new
entry "parent" in /sys/bus/rbd/image/N/ to report the identifying
information for the parent image, if any.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Format 2 parent images are partially identified by their image id,
but it may not be possible to determine their image name. The name
is not strictly needed for correct operation, so we won't be
treating it as an error if we don't know it. Handle this case
gracefully in rbd_name_show().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
We will know the image id for format 2 parent images, but won't
initially know its image name. Avoid making the query for an image
id in rbd_dev_image_id() if it's already known.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Group the activities that now take place after an rbd_dev_probe()
call into a single function, and move the call to that function
into rbd_dev_probe() itself.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Encapsulate the creation/initialization and destruction of rbd
device structures. The rbd_client and the rbd_spec structures
provided on creation hold references whose ownership is transferred
to the new rbd_device structure.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Group the allocation and initialization of fields of the rbd device
structure created in rbd_add(). Move the grouped code down later in
the function, just prior to the call to rbd_dev_probe(). This is
for the most part simple code movement.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The only reason rbd_dev is passed to rbd_get_client() is so its
rbd_client field can get assigned. Instead, just return the
rbd_client pointer as a result and have the caller do the
assignment.
Change rbd_put_client() so it takes an rbd_client structure,
so follows the more typical symmetry with rbd_get_client().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Pass the address of an rbd_spec structure to rbd_add_parse_args().
Use it to hold the information defining the rbd image to be mapped
in an rbd_add() call.
Use the result in the caller to initialize the rbd_dev->id field.
This means rbd_dev is no longer needed in rbd_add_parse_args(),
so get rid of it.
Now that this transformation of rbd_add_parse_args() is complete,
correct and expand on the its header documentation to reflect the
new reality.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
With layered images we'll share rbd_spec structures, so add a
reference count to it. It neatens up some code also.
A silly get/put pair is added to the alloc routine just to avoid
"defined but not used" warnings. It will go away soon.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Group the fields that uniquely specify an rbd image into a new
reference-counted rbd_spec structure. This structure will be used
to describe the desired image when mapping an image, and when
probing parent images in layered rbd devices. Replace the set of
fields in the rbd device structure with a pointer to a dynamically
allocated rbd_spec.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Change the interface to rbd_add_parse_args() so it returns an
error code rather than a pointer. Return the ceph_options result
via a pointer whose address is passed as an argument.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Have the caller pass the address of an rbd_options structure to
rbd_add_parse_args(), to be initialized with the information
gleaned as a result of the parse.
I know, this is another near-reversal of a recent change...
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The snapshot name returned by rbd_add_parse_args() just gets saved
in the rbd_dev eventually. So just do that inside that function and
do away with the snap_name argument, both in rbd_add_parse_args()
and rbd_dev_set_mapping().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
They "options" argument to rbd_add_parse_args() (and it's partner
options_size) is now only needed within the function, so there's no
need to have the caller allocate and pass the options buffer. Just
allocate the options buffer within the function using dup_token().
Also distinguish between failures due to failed memory allocation
and failing because a required argument was missing.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The value returned in the "snap_name_len" argument to
rbd_add_parse_args() is never actually used, so get rid of it.
The snap_name_len recorded in rbd_dev_v2_snap_name() is not
useful either, so get rid of that too.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This patch makes rbd_add_parse_args() be the single place all
argument parsing occurs for an image map request:
- Move the ceph_parse_options() call into that function
- Use local variables rather than parameters to hold the list
of monitor addresses supplied
- Rather than returning it, pass the snapshot name (and its
length) back via parameters
- Have the function return a ceph_options structure pointer
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Alex Elder