On Tegra210, hardware control of the SATA and XUSB pad PLLs must be
done during the UPHY enable sequence rather than the PLLE enable
sequence. Export functions to do this so that hardware control can
be enabled from the XUSB padctl driver.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch fix spelling typos in printk from various part
of the codes.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As a pure Clock Domain does not have the concept of powering the domain
itself, the CPG/MSTP driver does not provide power_off() and power_on()
callbacks.
However, the genpd core may still perform a dummy power down, causing
/sys/kernel/debug/pm_genpd/pm_genpd_summary to report the domain's
status being "off-0".
Use the always-on governor to make sure the domain is never powered
down, and always shows up as "on" in pm_genpd_summary.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
All local setup of the generic_pm_domain structure should have been
completed before calling pm_genpd_init().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
As a pure Clock Domain does not have the concept of powering the domain
itself, the CPG/MSTP driver does not provide power_off() and power_on()
callbacks.
However, the genpd core may still perform a dummy power down, causing
/sys/kernel/debug/pm_genpd/pm_genpd_summary to report the domain's
status being "off-0".
Use the always-on governor to make sure the domain is never powered
down, and always shows up as "on" in pm_genpd_summary.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
All local setup of the generic_pm_domain structure should have been
completed before calling pm_genpd_init().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
The i.MX 7 designs Ethernet PLL provides a 1000MHz reference clock.
Store the reference clock in the clk_pllv3 structure according to
the PLL type.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Introduce a DT-based driver for the R-Car System Controller, as found on
Renesas R-Car H1, R-Car Gen2, and R-Car Gen3 SoCs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Lg0X
-----END PGP SIGNATURE-----
Merge tag 'renesas-rcar-sysc2-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Merge "Second Round of Renesas ARM Based SoC R-Car SYSC Updates for v4.7" from Simon Horman:
Introduce a DT-based driver for the R-Car System Controller, as found on
Renesas R-Car H1, R-Car Gen2, and R-Car Gen3 SoCs.
* tag 'renesas-rcar-sysc2-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (30 commits)
soc: renesas: rcar-sysc: Add support for R-Car H3 power areas
soc: renesas: rcar-sysc: Add support for R-Car E2 power areas
soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas
soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas
soc: renesas: rcar-sysc: Add support for R-Car H2 power areas
soc: renesas: rcar-sysc: Add support for R-Car H1 power areas
soc: renesas: rcar-sysc: Enable Clock Domain for I/O devices
soc: renesas: rcar-sysc: Make rcar_sysc_power_is_off() static
soc: renesas: rcar-sysc: Add DT support for SYSC PM domains
soc: renesas: rcar-sysc: Improve rcar_sysc_power() debug info
soc: renesas: Move pm-rcar to drivers/soc/renesas/rcar-sysc
clk: renesas: cpg-mssr: Export cpg_mssr_{at,de}tach_dev()
clk: renesas: mstp: Provide dummy attach/detach_dev callbacks
clk: renesas: Provide Kconfig symbols for CPG/MSSR and CPG/MSTP support
soc: renesas: Add r8a7795 SYSC PM Domain Binding Definitions
soc: renesas: Add r8a7794 SYSC PM Domain Binding Definitions
soc: renesas: Add r8a7793 SYSC PM Domain Binding Definitions
soc: renesas: Add r8a7791 SYSC PM Domain Binding Definitions
soc: renesas: Add r8a7790 SYSC PM Domain Binding Definitions
soc: renesas: Add r8a7779 SYSC PM Domain Binding Definitions
...
The cifout clock is incorrect due to the manual error, we need to
fix it.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We don't need to many clocks enable after startup, to reduce some
power consumption.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch add some necessary frequencies for the RK3399 clock.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The gate bits of the i2c4 and i2c8 are incorrect due to the manual
error, we need to fix them.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Currently, the sunxi clock driver gets the name for the base factor clock
of divs clocks from the name field in factors_data. This prevents reusing
of the factor clock for clocks with same properties, but different name.
This commit makes the divs setup function try to get a name from
clock-output-names in the devicetree. It also removes the name field where
possible and merges the sun4i PLL5 and PLL6 clocks.
[Andre: Make temporary name allocation dynamic.]
Signed-off-by: Jens Kuske <jenskuske@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
fix spelling mistake, unsucessful -> unsuccessful
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- Two sets of name and unit address check fixes for dts files.
- DMA, McASP, and timer and regulator related dts changes for dra7
- Add more devices for Nokia N9/N950
- Initial support for am335x ICEv2
- Initial support for am572x-IDK
- Pinctrl changes for am335x-baltos-ir5221
- Initial support for Amazon Kindle Fire (first generation)
- A series of changes to add GPIO controller support for the
GPMC driver. The driver changes will be merged separately.
- Support for am43xx clkout1
- Pinctrl and RTC changes for am335x-chili
- Add support for dra72-evm rev C (SR2.0)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zZDR
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Merge "First set of device tree changes for omaps for v4.7 merge window" from Tony Lindgren:
- Two sets of name and unit address check fixes for dts files.
- DMA, McASP, and timer and regulator related dts changes for dra7
- Add more devices for Nokia N9/N950
- Initial support for am335x ICEv2
- Initial support for am572x-IDK
- Pinctrl changes for am335x-baltos-ir5221
- Initial support for Amazon Kindle Fire (first generation)
- A series of changes to add GPIO controller support for the
GPMC driver. The driver changes will be merged separately.
- Support for am43xx clkout1
- Pinctrl and RTC changes for am335x-chili
- Add support for dra72-evm rev C (SR2.0)
* tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (61 commits)
ARM: dts: Add support for dra72-evm rev C (SR2.0)
ARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC signal
ARM: dts: am335x-chili*: Move Ethernet MAC description from SOM to board
ARM: dts: am335x-chili*: Move uart0 description from SOM to board
ARM: dts: am43xx: add support for clkout1 clock
ARM: dts: omap3-beagle: Provide NAND ready pin
ARM: dts: am335x: Provide NAND ready pin
ARM: dts: am437x: Provide NAND ready pin
ARM: dts: dra7x-evm: Provide NAND ready pin
ARM: dts: dm816x: Enable gpio controller for GPMC
ARM: dts: dm814x: Enable gpio controller for GPMC
ARM: dts: omap3: Enable gpio controller for GPMC
ARM: dts: am4372: Enable gpio controller for GPMC
ARM: dts: am335x: Enable gpio controller for GPMC
ARM: dts: dra7: Enable gpio controller for GPMC
ARM: dts: omap5: Enable gpio and interrupt controller for GPMC
ARM: dts: omap4: Enable gpio and interrupt controller for GPMC
ARM: dts: omap24xx: Enable gpio and interrupt controller for GPMC
ARM: dts: omap4-kc1: Power off support
ARM: dts: omap4-kc1: LEDs support
...
Merge necessary new clocks from Sylwester (used by new board) and add support
for Exynos3250-based Artik5 board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mQfO
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-exynos3250-artik5-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Merge "Topic branch for Device Tree changes for Exynos 3250 for v4.7" from Krzysztof Kozlowski:
Merge necessary new clocks from Sylwester (used by new board) and add support
for Exynos3250-based Artik5 board.
* tag 'samsung-dt-exynos3250-artik5-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add MSHC2 DT node for SD card for exynos3250-artik5-eval board
ARM: dts: exynos: Add exynos3250-artik5 dtsi file for ARTIK5 module
ARM: dts: exynos: Add MSHC2 DT node for Exynos3250 SoC
ARM: dts: exynos: Add UART2 DT node for Exynos3250 SoC
ARM: dts: exynos: Add initial gpio setting of MMC2 device for exynos3250-monk
ARM: dts: exynos: Add initial pin configuration for exynos3250-rinato
clk: samsung: exynos3250: Add MMC2 clock
clk: samsung: exynos3250: Add UART2 clock
dt-bindings: Add the clock id of UART2 and MMC2 for Exynos3250
The TCON is a controller generating the timings to output videos signals,
acting like both a CRTC and an encoder.
It has two channels depending on the output, each channel being driven by
its own clock (and own clock controller).
Add a driver for the channel 1 clock.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
The A10 SoCs and relatives have a PLL controller to drive the PLL3 and
PLL7, clocked from a 3MHz oscillator, that drives the display related
clocks (GPU, display engine, TCON, etc.)
Add a driver for it.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Use the function resource_size instaed of explicit computation.
Problem found using Coccinelle.
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add the clock type which is used by the sun6i/8i families for video display.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
add CLK_SET_RATE_PARENT to modify the rate on clk upstream
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The composite clock didn't have any unregistration function, which forced
us to use clk_unregister directly on it.
While it was already not great from an API point of view, it also meant
that we were leaking the clk_composite structure allocated in
clk_register_composite.
Add a clk_unregister_composite function to fix this.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add Oxford Semiconductor OXNAS SoC Family Standard Clocks support.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[sboyd@codeaurora.org: Drop NULL/continue check in registration
loop]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
- Export the CPG/MSSR and CPG/MSTP attach/detach_dev callbacks, so
they can be called by the R-Car SYSC PM Domain driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jmQf
-----END PGP SIGNATURE-----
Merge tag 'clk-renesas-for-v4.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next
clk: renesas: R-Car SYSC PM Domain Preparation
- Export the CPG/MSSR and CPG/MSTP attach/detach_dev callbacks, so
they can be called by the R-Car SYSC PM Domain driver.
* tag 'clk-renesas-for-v4.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: cpg-mssr: Export cpg_mssr_{at,de}tach_dev()
clk: renesas: mstp: Provide dummy attach/detach_dev callbacks
clk: renesas: Provide Kconfig symbols for CPG/MSSR and CPG/MSTP support
rk3399 header and also in the clock code itself.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXFzXaAAoJEPOmecmc0R2BfoIH/jzxzuOFb7oMIEjWA1Dlv6ev
I9l63Pi5+/BGXMXkuvBCpyVKRk9T7jyAkQbvMuoo6ELOmEtn2AX4BC7Pq+xok7Xz
WZZQY/+nkYaAjJ6GscLpqWtNlhwCY0Ms/1WOp9DwTwcDztiTJaa9iQf5CELEJMhg
RfANV2DIi9mNh+Nx4JIQi2e01tN2EXUsSNH8NVKTqfZKR/hvb9KO3qQWQzGdgqPr
jNaAuVIq1iOIV0fBD7X8WJwQ2JqmrP7UsvIAXYk46E53jSk5RvnrGIvFp23pu0Jc
0a677jCpx09en6LLPXQOwgtx687hChP5HT466BXo241daJkX4isDKAx430p7hGY=
=99uY
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull some checkpatch silencers from Heiko Stuebner:
Fix quite some checkpatch warnings in the newly added
rk3399 header and also in the clock code itself.
* tag 'v4.7-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: fix checkpatch warning in core code
clk: rockchip: drop unnecessary header comment
clk: rockchip: reign in some overly long lines in the rk3399 controller
clk: rockchip: fix checkpatch errors in rk3399 dt-binding header
We seem to have accumulated a bunch of checkpatch warnings, with mainly
overlong lines and two unnecessary allocation error messages.
Most were introduced with the recent multi-controller-support but some
were quite a bit older.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The R-Car SYSC PM Domain driver has to power manage devices in power
areas using clocks. To reuse code and to share knowledge of clocks
suitable for power management, this is ideally done through the existing
cpg_mssr_attach_dev() and cpg_mssr_detach_dev() callbacks.
Hence these callbacks can no longer rely on their "domain" parameter
pointing to the CPG/MSSR Clock Domain. To handle this, keep a pointer to
the clock domain in a static variable. cpg_mssr_attach_dev() has to
support probe deferral, as the R-Car SYSC PM Domain may be initialized,
and devices may be added to it, before the CPG/MSSR Clock Domain is
initialized.
Dummy callbacks are provided for the case where CPG/MSTP support is not
included, so the rcar-sysc driver won't have to care about this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Currently the decision whether to build the renesas-cpg-mssr and
clk-mstp drivers is handled by Makefile logic. However, the rcar-sysc
driver will need to know whether CPG/MSSR and/or CPG/MSTP support are
available or not.
To avoid having to duplicate this logic, move it to Kconfig. Provide
non-visible CLK_RENESAS_CPG_MSSR and CLK_RENESAS_CPG_MSTP Kconfig
symbols, which can be used by both Makefiles and C code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
In poweroff, we set the reset bit and the power down bit, but only
managed to unset the reset bit for poweron. This meant that if HDMI
did -EPROBE_DEFER after it had grabbed its clocks, we'd power down the
PLLH (that had been on at boot time) and never recover.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 41691b8862 ("clk: bcm2835: Add support for programming the audio domain clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add __init attribute on a function that is only called from other __init
functions and that is not inlined, at least with gcc version 4.8.4 on an
x86 machine with allyesconfig. Currently, the function is put in the
.text.unlikely segment. Declaring it as __init will cause it to be put in
the .init.text and to disappear after initialization.
The result of objdump -x on the function before the change is as follows:
0000000000000000 l F .text.unlikely 0000000000000071 sysclk_from_fixed.constprop.5
And after the change it is as follows:
0000000000000480 l F .init.text 000000000000006c sysclk_from_fixed.constprop.5
Done with the help of Coccinelle. The semantic patch checks for local
static non-init functions that are called from an __init function and are
not called from any other function.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
of_find_node_by_name() will call of_node_put() on the node so we need to
get it first to avoid warnings.
The cfg_node needs to be put after we have finished processing the
properties.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add registration APIs in the clk fixed-rate code to return struct
clk_hw pointers instead of struct clk pointers. This way we hide
the struct clk pointer from providers unless they need to use
consumer facing APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add registration APIs in the clk gpio code to return struct
clk_hw pointers instead of struct clk pointers. This way we hide
the struct clk pointer from providers unless they need to use
consumer facing APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add registration APIs in the clk composite code to return struct
clk_hw pointers instead of struct clk pointers. This way we hide
the struct clk pointer from providers unless they need to use
consumer facing APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add registration APIs in the clk fractional divider code to
return struct clk_hw pointers instead of struct clk pointers.
This way we hide the struct clk pointer from providers unless
they need to use consumer facing APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add registration APIs in the clk fixed-factor code to return
struct clk_hw pointers instead of struct clk pointers. This way
we hide the struct clk pointer from providers unless they need to
use consumer facing APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add registration APIs in the clk mux code to return struct clk_hw
pointers instead of struct clk pointers. This way we hide the
struct clk pointer from providers unless they need to use
consumer facing APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add registration APIs in the clk gate code to return struct
clk_hw pointers instead of struct clk pointers. This way we hide
the struct clk pointer from providers unless they need to use
consumer facing APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add registration APIs in the clk divider code to return struct
clk_hw pointers instead of struct clk pointers. This way we hide
the struct clk pointer from providers unless they need to use
consumer facing APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Now that we have a clk registration API that doesn't return
struct clks, we need to have some way to hand out struct clks via
the clk_get() APIs that doesn't involve associating struct clk
pointers with a struct clk_lookup. Luckily, clkdev already
operates on struct clk_hw pointers, except for the registration
facing APIs where it converts struct clk pointers into struct
clk_hw pointers almost immediately.
Let's add clk_hw based registration APIs so that we can skip the
conversion step and provide a way for clk provider drivers to
operate exclusively on clk_hw structs. This way we clearly
split the API between consumers and providers.
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Now that we have a clk registration API that doesn't return
struct clks, we need to have some way to hand out struct clks via
the clk_get() APIs that doesn't involve associating struct clk
pointers with an OF node. Currently we ask the OF provider to
give us a struct clk pointer for some clkspec, turn that struct
clk into a struct clk_hw and then allocate a new struct clk to
return to the caller.
Let's add a clk_hw based OF provider hook that returns a struct
clk_hw directly, so that we skip the intermediate step of
converting from struct clk to struct clk_hw. Eventually when
we've converted all OF clk providers to struct clk_hw based APIs
we can remove the struct clk based ones.
It should also be noted that we change the onecell provider to
have a flex array instead of a pointer for the array of clk_hw
pointers. This allows providers to allocate one structure of the
correct length in one step instead of two.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We've largely split the clk consumer and provider APIs along
struct clk and struct clk_hw, but clk_register() still returns a
struct clk pointer for each struct clk_hw that's registered.
Eventually we'd like to only allocate struct clks when there's a
user, because struct clk is per-user now, so clk_register() needs
to change.
Let's add new APIs to register struct clk_hws, but this time
we'll hide the struct clk from the caller by returning an int
error code. Also add an unregistration API that takes the clk_hw
structure that was passed to the registration API. This way
provider drivers never have to deal with a struct clk pointer
unless they're using the clk consumer APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Now that we've converted the only caller over to another clkdev
API, remove this one.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The internal clk header did contain a comment indicating that some of the
defined registers were shared over multiple clock controller variants.
In recent times, it was simply extended all the time and stopped providing
any meaningful information, so drop it and it's overlong line.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We allow overlong lines in the array portitions describing the clock
trees to ease readability by having each element always at the same
position. But the rest of the code should honor the 80 char limit.
Fix the newly added rk3399 clock code to respect that.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A new element got inserted into enum mx35_clks with commit 3713e3f5e9
("clk: imx35: define two clocks for rtc"). This insertion shifted most
nummerical clock assignments to a new nummerical value which in turn
rendered most hardcoded nummeric values in imx35.dtsi incorrect.
Restore the existing order by moving the newly introduced clock to the
end of the enum. Update the dts documentation accordingly.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Fixes: 3713e3f5e9 ("clk: imx35: define two clocks for rtc")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The OMAP Platform code provides possibility to select GP Timer as
default clocksource instead of counter_32K by using bootcmd parameter
'clocksource', but the system will crash during early boot when this
option is used on dra7 or omap5 platforms, because it will hit BUG()
statement:
omap2_gptimer_clocksource_init
->BUG_ON(res);
This happens because clk_dev alias "sys_clkin_ck" is not registered.
Hence, fix it by adding missing "sys_clkin_ck" clk_dev aliases
definitions for omap5 and dra7.
Acked-by: Tero Kristo <t-kristo@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
AM33xx/AM43xx devices use the same DPLL IP blocks, which only support
maximum rate of 1GHz [1] for the default and 2GHz for the low-jitter type
DPLLs [2]. Reflect this limitation in the DPLL init code by adding the
max-rate parameter based on the DPLL types.
[1] Functional, integration & test specification for GS70 ADPLLS, Rev 1.0-01
[2] Functional, integration & test specification for GS70 ADPLLLJ, Rev 0.8-02
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
DPLLs typically have a maximum rate they can support, and this varies
from DPLL to DPLL. Add support of the maximum rate value to the DPLL
data struct, and also add check for this in the DPLL round_rate function.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add support for USB and SDIO clocks.
Report unsupported setups and panic.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The clk_register() function returns a valid pointer to struct clk or
ERR_PTR() error code, this makes a check for returned NULL value
useless and may lead to oops on error path.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes: bcc5fd49a0 ("clk: at91: add a driver for the h32mx clock")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Cc: Hou Zhiqiang <B48286@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Cc: Guo Zeng <Guo.Zeng@csr.com>
Cc: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add a driver for the main clock controller of the Artpec-6 Soc.
Signed-off-by: Lars Persson <larper@axis.com>
[sboyd@codeaurora.org: Reformatted driver structure and of match]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Commit 7aba4f5201 ("clk: ti: dflt: fix enable_reg validity check")
fixed a validation check by using an IS_ERR() macro within the
existing unlikely expression, but IS_ERR() macro already has an
unlikely inside it, so get rid of the redundant unlikely macro
from the validation check.
Reported-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Main change is probably the added support for the new rk3399 soc
and necessary infrastructure changes surrounding it.
The biggest chunk is probably that clock code is now able to
handle multiple clock providers in one system, as the rk3399
has two of those. A general one and another smaller one in a
separate power domain. The rk3399 also uses another new pll type.
Thankfully it just fits nicely into our current structure.
It also needs some parts like the cpuclk mux parameters to be
a bit more flexible and an new fractional divider subtype without
gate.
Apart from this big change we have some more fixes and removal
of forgotten variables.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXDHdWAAoJEPOmecmc0R2BrSAIAIf3g2D84lSEYPDfjLCPHKWQ
vdmBG/J53+OqFfk0IgYFPcgFfXsgXX0iv34WgtxDOQ1uF+uPDC1KQFlyNrg3E8Mu
7yUzHewphWumgtun/niThjhKTH+fRAZV4koo35KndXpsOXAy87uW+PZc+0f33ocD
FzF8mu3eQGsXNkZ3NM/BlLN38gfQVFLiiBNxg/yPmIGqI4VcWJPVUWr51nOURL78
5NozCjr1giUXPazat0IzsvGdO9szben7al2MixufnpkojjQkB+C8r2lxVXPSC7xH
EWHPj8WVS0eLYLPW6T3t27zvLNRuORzv5y7cHS8TMc4en1qFS5NJ56ruRv7SzNQ=
=kC1q
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull rockchip clk updates from Heiko Stuebner:
This is first big chunk of Rockchip clock-related changes for 4.7.
Main change is probably the added support for the new rk3399 soc
and necessary infrastructure changes surrounding it.
The biggest chunk is probably that clock code is now able to
handle multiple clock providers in one system, as the rk3399
has two of those. A general one and another smaller one in a
separate power domain. The rk3399 also uses another new pll type.
Thankfully it just fits nicely into our current structure.
It also needs some parts like the cpuclk mux parameters to be
a bit more flexible and an new fractional divider subtype without
gate.
Apart from this big change we have some more fixes and removal
of forgotten variables.
* tag 'v4.7-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: add clock controller for the RK3399
dt-bindings: add bindings for rk3399 clock controller
clk: rockchip: add dt-binding header for rk3399
clk: rockchip: release io resource when failing to init clk
clk: rockchip: remove redundant checking of device_node
clk: rockchip: fix warning reported by kernel-doc
clk: rockchip: remove mux_core_reg from rockchip_cpuclk_reg_data
clk: rockchip: add new pll-type for rk3399 and similar socs
clk: rockchip: Add support for multiple clock providers
clk: rockchip: allow varying mux parameters for cpuclk pll-sources
clk: rockchip: add a COMPOSITE_FRACMUX_NOGATE type
Pull renesas clk driver updates from Geert Uytterhoeven:
- Support for the PWM module clock and watchdog related clocks on R-Car H3,
- Cleanups and clarifications.
* 'clk-renesas-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: mstp: Clarify cpg_mstp_{at,de}tach_dev() domain parameter
clk: renesas: cpg-mssr: Drop check for CONFIG_PM_GENERIC_DOMAINS_OF
clk: renesas: mstp: Drop check for CONFIG_PM_GENERIC_DOMAINS_OF
clk: renesas: r8a7795: add RWDT clock
clk: renesas: r8a7795: add R clk
clk: renesas: r8a7795: add OSC and RINT clocks
clk: renesas: cpg-mssr: add generic support for read-only DIV6 clocks
clk: renesas: r8a7795: make SD clk definition specific for GEN3
clk: renesas: r8a7795: add PWM clock
- Register SAI clk as shared clocks to support SAI audio on i.MX6SX
- Add the missing ckil clock for i.MX7
- Update clk-gate2 and vf610 clock driver to prepare for suspend
support on VF610
- Fix DCU clock configurations and add TCON ipg clock to support DRM
display on VF610
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXDfCqAAoJEFBXWFqHsHzOg1EH/RbQ0iuyprdbHM8ItWuesWlN
rUoqLEb7HiGlKaz47HD7F47scQxuaMw+Qhj1YJapLojqRZOS2f8ZYc4WiDn0RLxU
zCBaqeyOuT8JvqbcDnSItCZAFH5XRJ5TA+8s/oCuZOfLL1pVT/pyWaulXhNDTVp3
DWhXfDEOJhy8Lyc6jb19NCwP8pceE5WW9xEHAc28WIBl8cVZjb9m4QGmWZsZK39z
4X3ckE7b+O0AaAgS9UuSEUr2WSu4oGCQ2CvHQrwdEZBMQTuC7cmhXtHFHmKl9S9f
7ROu3sMBgWx+Pbj5vcIwn5It6iEuaCnLRqiVUjY/rYHVO+VsAfA/0mLuoNsIeDQ=
=Ix59
-----END PGP SIGNATURE-----
Merge tag 'imx-clk-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next
The i.MX clock update for 4.7:
- Register SAI clk as shared clocks to support SAI audio on i.MX6SX
- Add the missing ckil clock for i.MX7
- Update clk-gate2 and vf610 clock driver to prepare for suspend
support on VF610
- Fix DCU clock configurations and add TCON ipg clock to support DRM
display on VF610
* tag 'imx-clk-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
clk: imx: vf610: fix whitespace in vf610-clock.h
clk: imx: vf610: add TCON ipg clock
clk: imx: vf610: fix DCU clock tree
clk: imx: add ckil clock for i.MX7
clk: imx: vf610: add suspend/resume support
clk: imx: vf610: add WKPU unit
clk: imx: vf610: leave DDR clock on
clk: imx: clk-gate2: allow custom gate configuration
clk: imx6sx: Register SAI clocks as shared clocks
- Fix the typo in CAN clock definition which is introduced by commit
ee36027427 ("clk: imx: Add clock support for imx6qp")
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXDfVNAAoJEFBXWFqHsHzOoKwIALheb8malCyK2qqbYnALttq+
fj/dCWG6Qg4Z/DtoudEzNxFcskZcKjI+Apy6DA4JKS5Z+j9fF9kDYpqiOsagUC1+
FR/DmUVgRUGD8nl//xsh2akLxthgj/vGb1dvmUIYrtw0RxNrjM74c2bpmsMGFBOY
4YB2atE0sUpvy10nUBSnKzAIBp+0PKq7+bCgAxedIF7ACdGoDwk6gamF8ypH3nhe
nJHAcgkM0I2MWBTRP/esooCBegZ1fSo+UwJ6savMN8L+EMswV6cOTplxmagSd/gb
9GLun+IGCpYqx9veryARFvdT8TqIMq8BciP/ZfxyLkG4qZSuDUkF55ypv/LOsRU=
=0uIk
-----END PGP SIGNATURE-----
Merge tag 'imx-clk-fixes-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-fixes
The i.MX clk fixes for 4.6:
- Fix the typo in CAN clock definition which is introduced by commit
ee36027427 ("clk: imx: Add clock support for imx6qp")
* tag 'imx-clk-fixes-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
clk: imx6q: fix typo in CAN clock definition
(UART, MMC2 clocks) for exynos3250 SoC and exporting of IDs
for exynos543x SoC AMBA AXI bus clocks needed for bus frequency
scaling.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Sl7j
-----END PGP SIGNATURE-----
Merge tag 'clk-v4.7-samsung' of git://linuxtv.org/snawrocki/samsung into clk-next
Pull samsung clk updates from Sylwester Nawrocki:
This includes addition of some missing clock tree definitions
(UART, MMC2 clocks) for exynos3250 SoC and exporting of IDs
for exynos543x SoC AMBA AXI bus clocks needed for bus frequency
scaling.
* tag 'clk-v4.7-samsung' of git://linuxtv.org/snawrocki/samsung:
clk: samsung: exynos542x: Add the clock id for ACLK
dt-bindings: clock: Add the clock id for ACLK clock of Exynos542x SoC
clk: samsung: exynos3250: Add MMC2 clock
clk: samsung: exynos3250: Add UART2 clock
dt-bindings: Add the clock id of UART2 and MMC2 for Exynos3250
When changing the clock-rate, currently a new parent is set first and a
divider adapted thereafter. This may result in the clock-rate overflowing
its target rate for a short time if the new parent has a higher rate than
the old parent.
While this often doesn't produce negative effects, it can affect components
in a voltage-scaling environment, like the GPU on the rk3399 socs, where
the voltage than simply is to low for the temporarily to high clock rate.
For general clock hirarchies this may need more extensive adaptions to
the common clock-framework, but at least for composite clocks having
both parent and rate settings it is easy to create a short-term solution to
make sure the clock-rate does not overflow the target.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This patch adds the clock id for ACLK clock which is source clock
of AMBA AXI bus. This clock should be handled in the bus frequency
scaling driver.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
commit ee36027427 ("clk: imx: Add clock support for imx6qp")
introduced a regression due to a subtle typo in the 'can_root' clock
definition. The effect is that trying to configure the bitrate of the
can interfaces fails with -EDOM or produces a division by zero error
due to the clock_freq of the can serial clock being reported as '0'.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Fixes: ee36027427 ("clk: imx: Add clock support for imx6qp")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the ipg (bus) clock for the TCON modules (Timing Controller). This
module is required by the new DCU DRM driver, since the display signals
pass through TCON.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Similar to an earlier fix for the SAI clocks, the DCU clock hierarchy
mixes the bus clock with the display controllers pixel clock. Tests
have shown that the gates in CCM_CCGR3/9 registers do not control
the DCU pixel clock, but only the register access clock (bus clock).
Fix this by defining the parent clock of VF610_CLK_DCUx to be the bus
clock (ipg_bus).
Since the clock has not been used far, there are no further changes
needed.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
rename the mcasp8_ahclk_mux to mcasp8_ahclkx_mux.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[tony@atomide.com: updated for the unit offsets]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This call matches clocks which have been marked as critical in DT
and sets the appropriate flag. These flags can then be used to
mark the clock core flags appropriately prior to registration.
Legacy bindings requiring this feature must add the clock-critical
property to their binding descriptions, as it is not a part of
common-clock binding.
Cc: devicetree@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1455225554-13267-4-git-send-email-mturquette@baylibre.com
Critical clocks are those which must not be gated, else undefined
or catastrophic failure would occur. Here we have chosen to
ensure the prepare/enable counts are correctly incremented, so as
not to confuse users with enabled clocks with no visible users.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1455225554-13267-2-git-send-email-mturquette@baylibre.com
Make it clear that the "domain" parameter of the cpg_mstp_attach_dev()
and cpg_mstp_detach_dev() functions is not used.
The cpg_mstp_attach_dev() and cpg_mstp_detach_dev() callbacks are not
only used by the CPG/MSTP Clock Domain driver, but also by the R-Mobile
SYSC PM Domain driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
As of commit 71d076ceb2 ("ARM: shmobile: Enable PM and
PM_GENERIC_DOMAINS for SoCs with PM Domains"),
CONFIG_PM_GENERIC_DOMAINS_OF is always enabled for SoCs with a CPG/MSSR
block.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
As of commit 71d076ceb2 ("ARM: shmobile: Enable PM and
PM_GENERIC_DOMAINS for SoCs with PM Domains"),
CONFIG_PM_GENERIC_DOMAINS_OF is always enabled for SoCs with MSTP
clocks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add the necessary clock to use the ckil on i.MX7.
Inspired from the following patch:
https://github.com/boundarydevices/linux-imx6/commit/b80e8271
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
R can select between two parents. We deal with it like this: During
initialization, check if EXTALR is populated. If so, use it for R. If
not, use R_Internal. clk_mux doesn't help here because we don't want to
switch parents depending on the clock rate. The clock rate (and source)
should stay constant for the watchdog, so I think a setup like this
during initialization makes sense.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Gen3 has two clocks (OSC and R) which look like a DIV6 clock but their
divider value is read-only and depends on MD pins at bootup. Add support
for such clocks by reading the value and adding a fixed clock.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The drivers/clk/mvebu directory is only being built when
CONFIG_PLAT_ORION=y. As we are going to support additional mvebu
platforms in drivers/clk/mvebu, which don't have CONFIG_PLAT_ORION=y,
we need to recurse into this directory regardless of the value of
CONFIG_PLAT_ORION.
Since all files in drivers/clk/mvebu/ are already conditionally
compiled depending on various Kconfig options, we can recurse
unconditionally into drivers/clk/mvebu without any other change.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The clock register are lost when enterying LPSTOPx, hence provide
suspend/resume functions restoring them. The clock gates get
restored by the individual driver, hence we do not need to restore
them here.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To use STOP mode without putting DDR3 into self-refresh mode, we
need to keep the DDR clock enabled. Use the new gate configuration
with a value of 2 to make sure that the clock is enabled in RUN,
WAIT and STOP mode.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The 2-bit gates found i.MX and Vybrid SoC support different clock
configuration:
0b00: clk disabled
0b01: clk enabled in RUN mode but disabled in WAIT and STOP mode
0b10: clk enabled in RUN, WAIT and STOP mode (only Vybrid)
0b11: clk enabled in RUN and WAIT mode
For some clocks, we might want to configure different behaviour,
e.g. a memory clock should be on even in STOP mode. Add a new
function imx_clk_gate2_cgr which allow to configure specific
gate values through the cgr_val parameter.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
SAIx and SAIx_IPG share the same bit fields in the CCM registers, so
we should better register them via imx_clk_gate2_shared().
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
clocks on 2835, add the PCM clock that used to be driven directly by
the bcm2835-i2s driver (that driver has been broken since this driver
was introduced), and adds many other new clocks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+50t
-----END PGP SIGNATURE-----
Merge tag 'bcm2835-clk-next-2016-03-17' of git://github.com/anholt/linux into clk-next
This pull request against clk/clk-next brings in fixes for fractional
clocks on 2835, add the PCM clock that used to be driven directly by
the bcm2835-i2s driver (that driver has been broken since this driver
was introduced), and adds many other new clocks.
* tag 'bcm2835-clk-next-2016-03-17' of git://github.com/anholt/linux:
clk: bcm2835: add missing osc and per clocks
clk: bcm2835: add missing PLL clock dividers
clk: bcm2835: enable management of PCM clock
clk: bcm2835: reorganize bcm2835_clock_array assignment
clk: bcm2835: remove use of BCM2835_CLOCK_COUNT in driver
clk: bcm2835: expose raw clock-registers via debugfs
clk: bcm2835: clean up coding style issues
clk: bcm2835: correctly enable fractional clock support
clk: bcm2835: divider value has to be 1 or more
clk: bcm2835: add locking to pll*_on/off methods
clk: bcm2835: pll_off should only update CM_PLL_ANARST
Drivers for these don't exist yet so we will add them as fixed clocks
so we don't BUG() if we change clocks that reference these clocks.
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
When this was added not all the remaining defines were switched over to
use enums, so let's complete that process here
Reported-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The qcom_reset_ops structure is never modified. Make it const.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The rst_ops structure is never modified. Make it const.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The sunxi_ve_reset_ops, sun9i_mmc_reset_ops, and sunxi_usb_reset_ops
structures are never modified. Make them const.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The atlas7_rst_ops structure is never modified. Make it const.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The rockchip_softrst_ops structure is never modified. Make it const.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The mmp_clk_reset_ops structure is never modified. Make it const.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The mtk_reset_ops structure is never modified. Make it const.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
About SD clocks: The clock type is Gen3 specific, the callbacks are all
Gen3 specific; I think the clock definition should also be Gen3 specific
and not in the general header file.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the clock tree definition for the new RK3399 SoC.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We should call iounmap to relase reg_base since it's not going
to be used any more if failing to init clk.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
rockchip_clk_of_add_provider is used by sub-clk driver which
already call of_iomap before calling it. If device_node does
not exist, of_iomap returns NULL which will fail to init the
sub-clk driver. So really it's redundant.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
./scripts/kernel-doc -man -v drivers/clk/rockchip/clk.h > /dev/null
drivers/clk/rockchip/clk.h:133: warning: missing initial short
description on line:
* struct rockchip_clk_provider: information about clock provider
drivers/clk/rockchip/clk.h:133: info: Scanning doc for struct
drivers/clk/rockchip/clk.h:164: warning: missing initial short
description on line:
* struct rockchip_pll_clock: information about pll clock
drivers/clk/rockchip/clk.h:164: info: Scanning doc for struct
drivers/clk/rockchip/clk.h:194: warning: No description found for
parameter 'parent_names'
drivers/clk/rockchip/clk.h:194: warning: No description found for
parameter 'num_parents'
drivers/clk/rockchip/clk.h:194: warning: Excess struct/union/enum/typedef
member 'parent_name' description in 'rockchip_pll_clock'
drivers/clk/rockchip/clk.h:235: warning: missing initial short
description on line:
* struct rockchip_cpuclk_reg_data: describes register offsets and
masks of the cpuclock
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
mux_core_reg isn't been used anywhere, let's remove it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rk3399's pll and clock are similar with rk3036's, it different
with base on the rk3066(rk3188, rk3288, rk3368 use it), there are
different adjust foctors and control registers, so these should be
independent and separate from the series of rk3066s.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There are need to support Multi-CRUs probability in future, but
it is not supported on the current Rockchip Clock Framework.
Therefore, this patch add support a provider as the parameter
handler when we call the clock register functions for per CRU.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Thers are only two parent PLLs that APLL and GPLL for core on the
previous SoCs (RK3066/RK3188/RK3288/RK3368). Hence, we set fixed
GPLL as alternate parent when core is switching freq.
Since RK3399 big.LITTLE architecture, we need to select and adapt
more PLLs (ALPLL/ABPLL/DPLL/GPLL) sources.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Because there are some frac clock mux nodes don't have a gate node on
the RK3399.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
new device support in terms of LoC, but there has been some cleanup
in the core as well as the usual minor clk additions to various
drivers.
Core:
- parent tracking has been simplified
- CLK_IS_ROOT is now a no-op flag, cleaning up drivers has started
- of_clk_init() doesn't consider disabled DT nodes anymore
- clk_unregister() had an error path bug squashed
- of_clk_get_parent_count() has been fixed to only return unsigned ints
- HAVE_MACH_CLKDEV is removed now that the last arch user (ARM) is gone
New Drivers:
- NXP LPC18xx creg
- QCOM IPQ4019 GCC
- TI dm814x ADPLL
- i.MX6QP
Updates:
- Cyngus audio clks found on Broadcom iProc devices
- Non-critical fixes for BCM2385 PLLs
- Samsung exynos5433 updates for clk id errors, HDMI support,
suspend/resume simplifications
- USB, CAN, LVDS, and FCP clks on shmobile devices
- sunxi got support for more clks on new SoCs and went through a minor
refactoring/rewrite to use a simpler factor clk construct
- rockchip added some more clk ids and added suport for fraction dividers
- QCOM GDSCs in msm8996
- A new devm helper to make adding custom actions simpler (acked by Greg)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=bZFY
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The clk changes for this release cycle are mostly dominated by new
device support in terms of LoC, but there has been some cleanup in the
core as well as the usual minor clk additions to various drivers.
Core:
- parent tracking has been simplified
- CLK_IS_ROOT is now a no-op flag, cleaning up drivers has started
- of_clk_init() doesn't consider disabled DT nodes anymore
- clk_unregister() had an error path bug squashed
- of_clk_get_parent_count() has been fixed to only return unsigned ints
- HAVE_MACH_CLKDEV is removed now that the last arch user (ARM) is gone
New Drivers:
- NXP LPC18xx creg
- QCOM IPQ4019 GCC
- TI dm814x ADPLL
- i.MX6QP
Updates:
- Cyngus audio clks found on Broadcom iProc devices
- Non-critical fixes for BCM2385 PLLs
- Samsung exynos5433 updates for clk id errors, HDMI support,
suspend/resume simplifications
- USB, CAN, LVDS, and FCP clks on shmobile devices
- sunxi got support for more clks on new SoCs and went through a
minor refactoring/rewrite to use a simpler factor clk construct
- rockchip added some more clk ids and added suport for fraction
dividers
- QCOM GDSCs in msm8996
- A new devm helper to make adding custom actions simpler (acked by Greg)"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (197 commits)
clk: bcm2835: fix check of error code returned by devm_ioremap_resource()
clk: renesas: div6: use RENESAS for #define
clk: renesas: Rename header file renesas.h
clk: max77{686,802}: Remove CLK_IS_ROOT
clk: versatile: Remove CLK_IS_ROOT
clk: sunxi: Remove use of variable length array
clk: fixed-rate: Remove CLK_IS_ROOT
clk: qcom: Remove CLK_IS_ROOT
doc: dt: add documentation for lpc1850-creg-clk driver
clk: add lpc18xx creg clk driver
clk: lpc32xx: fix compilation warning
clk: xgene: Add missing parenthesis when clearing divider value
clk: mb86s7x: Remove CLK_IS_ROOT
clk: x86: Remove clkdev.h and clk.h includes
clk: x86: Remove CLK_IS_ROOT
clk: mvebu: Remove CLK_IS_ROOT
clk: renesas: move drivers to renesas directory
clk: si5{14,351,70}: Remove CLK_IS_ROOT
clk: scpi: Remove CLK_IS_ROOT
clk: s2mps11: Remove CLK_IS_ROOT
...
Driver updates for ARM SoCs, these contain various things that touch
the drivers/ directory but got merged through arm-soc for practical
reasons:
- Rockchip rk3368 gains power domain support
- Small updates for the ARM spmi driver
- The Atmel PMC driver saw a larger rework, touching both
arch/arm/mach-at91 and drivers/clk/at91
- All reset controller driver changes alway get merged through
arm-soc, though this time the largest change is the addition
of a MIPS pistachio reset driver
- One bugfix for the NXP (formerly Freescale) i.MX weim bus driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=HS4G
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Driver updates for ARM SoCs, these contain various things that touch
the drivers/ directory but got merged through arm-soc for practical
reasons:
- Rockchip rk3368 gains power domain support
- Small updates for the ARM spmi driver
- The Atmel PMC driver saw a larger rework, touching both
arch/arm/mach-at91 and drivers/clk/at91
- All reset controller driver changes alway get merged through
arm-soc, though this time the largest change is the addition of a
MIPS pistachio reset driver
- One bugfix for the NXP (formerly Freescale) i.MX weim bus driver"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
bus: imx-weim: Take the 'status' property value into account
clk: at91: remove useless includes
clk: at91: pmc: remove useless capacities handling
clk: at91: pmc: drop at91_pmc_base
usb: gadget: atmel: access the PMC using regmap
ARM: at91: remove useless includes and function prototypes
ARM: at91: pm: move idle functions to pm.c
ARM: at91: pm: find and remap the pmc
ARM: at91: pm: simply call at91_pm_init
clk: at91: pmc: move pmc structures to C file
clk: at91: pmc: merge at91_pmc_init in atmel_pmc_probe
clk: at91: remove IRQ handling and use polling
clk: at91: make use of syscon/regmap internally
clk: at91: make use of syscon to share PMC registers in several drivers
hwmon: (scpi) add energy meter support
firmware: arm_scpi: add support for 64-bit sensor values
firmware: arm_scpi: decrease Tx timeout to 20ms
firmware: arm_scpi: fix send_message and sensor_get_value for big-endian
reset: sti: Make reset_control_ops const
reset: zynq: Make reset_control_ops const
...
Here's our branch of ARM64 contents for this merge window, now
containing all ARM64 changes other than device tree files.
- Various new platforms get added
- Allwinner A64 SoC
- Annapurna Labs Alpine SoCs
- Broadcom Vulcan
- Marvell Armada 3700 SoCs
- Amlogic S905
- Various defconfig changes to enable platform specific drivers
This branch includes the clk git tree to resolve a build-time
dependency.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fO+Q
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit changes from Arnd Bergmann:
"Here's our branch of ARM64 contents for this merge window, now
containing all ARM64 changes other than device tree files.
- Various new platforms get added:
* Allwinner A64 SoC
* Annapurna Labs Alpine SoCs
* Broadcom Vulcan
* Marvell Armada 3700 SoCs
* Amlogic S905
- Various defconfig changes to enable platform specific drivers
This branch includes the clk git tree to resolve a build-time
dependency"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
arm64: defconfig: Increase MMC_BLOCK_MINORS to 16
arm64: defconfig: Add Qualcomm sdhci and restart functionality
ARM64: Enable Amlogic Meson GXBaby platform
arm64: defconfig: Enable Samsung MFD and related configs
arm64: alpine: select the Alpine MSI controller driver
arm64: defconfig: enable the Alpine family
arm64: add Alpine SoC family
arm64: defconfig: Enable exynos thermal config
arm64: add defconfig options for Allwinner SoCs
arm64: defconfig: Enable DesignWare APB GPIO controller
arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver support
arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS
clk: samsung: Don't build ARMv8 clock drivers on ARMv7
MAINTAINERS: Add entry for Broadcom Vulcan SoC
arm64: cputype info for Broadcom Vulcan
arm64: Broadcom Vulcan support
arm64: defconfig: Add Broadcom Vulcan to defconfig
arm64: update ARCH_MVEBU for Marvell Armada 7K/8K support
Documentation: arm: add Marvell Armada 7K and 8K families
Documentation: arm: add link to Armada 38x Functional Spec
...
Newly added support for additional SoCs:
- Axis Artpec-6 SoC family
- Allwinner A83T SoC
- Mediatek MT7623
- NXP i.MX6QP SoC
- ST Microelectronics stm32f469 microcontroller
New features:
- SMP support for Mediatek mt2701
- Big-endian support for NXP i.MX
- DaVinci now uses the new DMA engine dma_slave_map
- OMAP now uses the new DMA engine dma_slave_map
- earlyprintk support for palmchip uart on mach-tango
- delay timer support for orion
Other:
- Exynos PMU driver moved out to drivers/soc/
- Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ynNj
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"Newly added support for additional SoCs:
- Axis Artpec-6 SoC family
- Allwinner A83T SoC
- Mediatek MT7623
- NXP i.MX6QP SoC
- ST Microelectronics stm32f469 microcontroller
New features:
- SMP support for Mediatek mt2701
- Big-endian support for NXP i.MX
- DaVinci now uses the new DMA engine dma_slave_map
- OMAP now uses the new DMA engine dma_slave_map
- earlyprintk support for palmchip uart on mach-tango
- delay timer support for orion
Other:
- Exynos PMU driver moved out to drivers/soc/
- Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP,
uniphier"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
ARM: uniphier: rework SMP code to support new System Bus binding
ARM: uniphier: add missing of_node_put()
ARM: at91: avoid defining CONFIG_* symbols in source code
ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1
ARM: imx: Make reset_control_ops const
ARM: imx: Do L2 errata only if the L2 cache isn't enabled
ARM: imx: select ARM_CPU_SUSPEND only for imx6
dmaengine: pxa_dma: fix the maximum requestor line
ARM: alpine: select the Alpine MSI controller driver
ARM: pxa: add the number of DMA requestor lines
dmaengine: mmp-pdma: add number of requestors
dma: mmp_pdma: Add the #dma-requests DT property documentation
ARM: OMAP2+: Add rtc hwmod configuration for ti81xx
ARM: s3c24xx: Avoid warning for inb/outb
ARM: zynq: Move early printk virtual address to vmalloc area
ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
ARM: SAMSUNG: Remove unused register offset definition
ARM: EXYNOS: Cleanup header files inclusion
drivers: soc: samsung: Enable COMPILE_TEST
MAINTAINERS: Add maintainers entry for drivers/soc/samsung
...
Pull ARM updates from Russell King:
"Another mixture of changes this time around:
- Split XIP linker file from main linker file to make it more
maintainable, and various XIP fixes, and clean up a resulting
macro.
- Decompressor cleanups from Masahiro Yamada
- Avoid printing an error for a missing L2 cache
- Remove some duplicated symbols in System.map, and move
vectors/stubs back into kernel VMA
- Various low priority fixes from Arnd
- Updates to allow bus match functions to return negative errno
values, touching some drivers and the driver core. Greg has acked
these changes.
- Virtualisation platform udpates form Jean-Philippe Brucker.
- Security enhancements from Kees Cook
- Rework some Kconfig dependencies and move PSCI idle management code
out of arch/arm into drivers/firmware/psci.c
- ARM DMA mapping updates, touching media, acked by Mauro.
- Fix places in ARM code which should be using virt_to_idmap() so
that Keystone2 can work.
- Fix Marvell Tauros2 to work again with non-DT boots.
- Provide a delay timer for ARM Orion platforms"
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (45 commits)
ARM: 8546/1: dma-mapping: refactor to fix coherent+cma+gfp=0
ARM: 8547/1: dma-mapping: store buffer information
ARM: 8543/1: decompressor: rename suffix_y to compress-y
ARM: 8542/1: decompressor: merge piggy.*.S and simplify Makefile
ARM: 8541/1: decompressor: drop redundant FORCE in Makefile
ARM: 8540/1: decompressor: use clean-files instead of extra-y to clean files
ARM: 8539/1: decompressor: drop more unneeded assignments to "targets"
ARM: 8538/1: decompressor: drop unneeded assignments to "targets"
ARM: 8532/1: uncompress: mark putc as inline
ARM: 8531/1: turn init_new_context into an inline function
ARM: 8530/1: remove VIRT_TO_BUS
ARM: 8537/1: drop unused DEBUG_RODATA from XIP_KERNEL
ARM: 8536/1: mm: hide __start_rodata_section_aligned for non-debug builds
ARM: 8535/1: mm: DEBUG_RODATA makes no sense with XIP_KERNEL
ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs
ARM: make the physical-relative calculation more obvious
ARM: 8512/1: proc-v7.S: Adjust stack address when XIP_KERNEL
ARM: 8411/1: Add default SPARSEMEM settings
ARM: 8503/1: clk_register_clkdev: remove format string interface
ARM: 8529/1: remove 'i' and 'zi' targets
...
Add AVE0, DFT, GP0, GP1, GP2, SLIM, SMI, TEC, DPI, CAM0, CAM1, DSI0E,
and DSI1E. PULSE is not added because it has an extra divider.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Enable the PCM clock in the SOC, which is used by the
bcm2835-i2s driver.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reorganize bcm2835_clock_array so that there is no more
need for separate bcm2835_*_data structures to be defined.
Instead the required structures are generated inline via
helper macros.
To allow this to also work for pll alone it was required that
the parent_pll was changed from a pointer to bcm2835_pll_data
to the name of the pll instead.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
As the use of BCM2835_CLOCK_COUNT in
include/dt-bindings/clock/bcm2835.h is frowned upon as
it needs to get modified every time a new clock gets introduced
this patch changes the clk-bcm2835 driver to use a different
scheme for registration of clocks and pll, so that there
is no more need for BCM2835_CLOCK_COUNT to be defined.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
For debugging purposes under some circumstance
it helps to be able to see the actual clock registers.
E.g: when looking at the clock divider it is helpful to
see what the actual clock divider is.
This patch exposes all the clock registers specific to each
clock/pll/pll-divider via debugfs.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Eric Anholt <eric@anholt.net>
The current driver calculates the clock divider with
fractional support enabled.
But it does not enable fractional support in the
control register itself resulting in an integer only divider,
but in clk_set_rate responds back the fractionally divided
clock frequency.
This patch enables fractional support in the control register
whenever there is a fractional bit set in the requested clock divider.
Mash clock limits are are also handled for the PWM clock
applying the correct divider limits (2 and max_int) applicable to
basic fractional divider support (mash order of 1).
It also adds locking to protect the read/modify/write cycle of
the register modification.
Fixes: 41691b8862 ("clk: bcm2835: Add support for programming the
audio domain clocks")
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Current clamping of a normal divider allows a value < 1 to be valid.
A divider of < 1 would actually only be possible if we had a PLL...
So this patch clamps the divider to 1.
Fixes: 41691b8862 ("clk: bcm2835: Add support for programming the
audio domain clocks")
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Add missing locking to:
* bcm2835_pll_divider_on
* bcm2835_pll_divider_off
to protect the read modify write cycle for the
register access protecting both cm_reg and a2w_reg
registers.
Fixes: 41691b8862 ("clk: bcm2835: Add support for programming the
audio domain clocks")
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
bcm2835_pll_off is currently assigning CM_PLL_ANARST to the control
register, which may lose the other bits that are currently set by the
clock dividers.
It also now locks during the read/modify/write cycle of both
registers.
Fixes: 41691b8862 ("clk: bcm2835: Add support for programming the
audio domain clocks")
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
The emac needs constant and very specific rate but the possible PLL-sources
are very limited, so we expect the PLL source to be set manually on per
board and don't want it to get changed in an automatic way later.
So add the necessary clock-id and disable reparenting on set_rate calls.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Associate the new clock id the clock.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Xing Zheng <zhengxing@rock-chips.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
The change fixes potential oops while accessing iomem on invalid
address, if devm_ioremap_resource() fails due to some reason.
The devm_ioremap_resource() function returns ERR_PTR() and never
returns NULL, which makes useless a following check for NULL.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Fixes: 5e63dcc74b ("clk: bcm2835: Add a driver for the auxiliary peripheral clock gates")
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Name the #define guarding compilation of this header
__RENESAS_CLK_DIV6_H__ rather than __SHMOBILE_CLK_DIV6_H__.
This is a follow-up to renaming the directory in which this file lives from
shmobile to renesas which is in turn part of an ongoing process to migrate
from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that
RENESAS seems to be a more appropriate name than SHMOBILE for the majority
of Renesas ARM based SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.
Along with the above mentioned Kconfig changes it seems appropriate
to also rename files.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Cc: Pawel Moll <pawel.moll@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Using an array allocated on the stack may lead to stack overflows
and other problems so let's move the allocation to the heap
instead. This silences the following checker warning as well.
drivers/clk/sunxi/clk-sun8i-mbus.c:36:29: warning: Variable length array is used
Cc: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The CREG block on lpc18xx contains configuration register
for two low power clocks. Support enabling of these two
clocks with a clk driver that access CREG trough the
syscon regmap interface.
These clocks are needed to support peripherals like the
internal RTC on lpc18xx.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
fixes for missing error-handling in mmc-phase, inverters and cpu-clocks
and some more clock-ids.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJW2N6oAAoJEPOmecmc0R2BUgQH/R+inbboTw31Gsa5KOEeoGDb
BwET4Cw5rD2ns1rOGZtQ3nFGv5I7fKq1ChMuQVMAMbv/60rEjGm3ACOWbxrTg2+P
o7FVSGoE+fOPZKfxbPGC3c1rSDnlAwwHhZWxXKvTrybAKdhoiHhzbx5ycc5r57vw
uVzLWJL3PgkOCnc4lbE8Dtr6DYEaIA0w7sZ0oplXhMxm49YBzlJi1zWcx400Xb8D
ourvqbD2aWGSTfjWcQlxSHCHSVKZDfZRfJI4c16XAYJ1SXtWsAUqTTpDAgFgrFI/
o9v+V4JMKGCYfqb1P+h8dMvc/8FJgvwdRY2OtWAWVlrYZpZ9cp+nDeLP2TEv554=
=ekax
-----END PGP SIGNATURE-----
Merge tag 'v4.6-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull second batch of rockchip clk updates from Heiko Stuebner:
Inclusion of the rk3368 fractional dividers into our handling scheme,
fixes for missing error-handling in mmc-phase, inverters and cpu-clocks
and some more clock-ids.
* tag 'v4.6-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: include downstream muxes into fractional dividers on rk3368
clk: rockchip: set the clock ids for RK3228 HDMI
clk: rockchip: set the clock ids for RK3228 VOP
clk: rockchip: add the tsadc clocks found on rk3228 SoCs
clk: rockchip: add the new clock ids for RK3228 HDMI
clk: rockchip: add the new clock ids for RK3228 VOP
clk: rockchip: add id of the tsadc clock found on rk3228 SoCs
clk: rockchip: fix coding style for clk-cpu.c
clk: rockchip: don't return NULL when registering mmc branch fails
clk: rockchip: don't return NULL when registering inverter fails
clk: rockchip: check grf when waiting pll lock
clk: rockchip: disable alt_parent clk in err cases when registering cpuclk
Remove the following false positives compilation warning:
- drivers/clk/nxp/clk-lpc32xx.c: In function 'lpc32xx_clk_register':
warning: 'hw' may be used uninitialized in this function [-Wmaybe-uninitialized]
- drivers/clk/nxp/clk-lpc32xx.c: In function 'clk_hclk_pll_round_rate':
warning: 'p' may be used uninitialized in this function [-Wmaybe-uninitialized]
warning: 'n' may be used uninitialized in this function [-Wmaybe-uninitialized]
warning: 'm' may be used uninitialized in this function [-Wmaybe-uninitialized]
Tested using gcc version 4.7.3.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
[sboyd@codeaurora.org: Drop assignment of hw to NULL as return
silences it and is less likely to lead to hiding problems later]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
In the initial fix for non-zero divider shift value, the parenthesis
was missing after the negate operation. This patch adds the required
parenthesis. Otherwise, lower bits may be cleared unintentionally.
Signed-off-by: Loc Ho <lho@apm.com>
Acked-by: Toan Le <toanle@apm.com>
Fixes: 1382ea631d ("clk: xgene: Fix divider with non-zero shift value")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This driver is a clk provider and not a clk consumer, so remove
the clk.h include. Also, drop clkdev.h because there's not clkdev
usage here either.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.
Along with the above mentioned Kconfig changes it seems appropriate
to also rename directories that only hold drivers for such SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Pull shmobile clk updates from Geert Uytterhoeven:
- Fix a bug in the div6 clock driver that was exposed by CAN
support on R-Car H3,
- Add more module clocks for R-Car H3.
* 'clk-shmobile-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: shmobile: r8a7795: Add CAN FD peripheral clock
clk: shmobile: r8a7795: Add CANFD clock
clk: shmobile: r8a7795: Add CAN peripheral clock
clk: shmobile: div6: Fix .recalc_rate() using a stale divisor
clk: shmobile: r8a7795: Add LVDS module clock
clk: shmobile: r8a7795: Add FCP clocks
This flag is a no-op now. Remove usage of the flag.
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Cc: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Acked-by: Andi Shyti <andi.shyti@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Acked-by: Rhyland Klein <rklein@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Acked-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Bintian Wang <bintian.wang@huawei.com>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now. Remove usage of the flag.
Cc: Lee Jones <lee@kernel.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Pull i.MX clk updates from Shawn Guo:
The i.MX clock update for 4.6:
- Add the clock driver support for the latest i.MX6 family SoCs
addition - i.MX6QP.
- Clean up the whitespace in i.MX6UL clock driver and add the missing
KPP clock.
- Correct pwm7 clock name in i.MX6UL clock driver.
* tag 'imx-clk-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
clk: imx: add kpp clock for i.MX6UL
clk: imx: whitespace cleanup; no functional change
clk: imx: correct pwm7 clock name in driver for i.MX6UL
clk: imx: Add clock support for imx6qp
Pull Allwinner clk updates from Maxime Ripard:
Allwinner clocks additions for 4.6
A bunch of things, mostly:
- Finally switched everything over to OF_CLK_DECLARE, which should remove
orphans clocks entirely
- Reworked the clk-factors to be able to add new parameters
- Improved the error reporting
- A bunch of new clocks for new SoCs.
* tag 'sunxi-clocks-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (25 commits)
clk: sunxi: Add apb0 gates for H3
clk: sunxi: Improve divs_clk error handling and reporting
clk: sunxi: improve divider_clk error handling and reporting
clk: sunxi: improve mux_clk error handling and reporting
clk: sunxi: Fix sun8i-a23-apb0-clk divider flags
clk: sunxi: Remove clk_register_clkdev calls
clk: sunxi: Remove old probe and protection code
clk: sunxi: convert current clocks registration to CLK_OF_DECLARE
clk: sunxi: Make clocks setup functions take const pointer
clk: sunxi: Make clocks setup functions return their clock
clk: sunxi: improve error reporting for the mux clock
clk: sunxi: don't mark sun6i_ar100_data __initconst
clk: sunxi: add bus gates for A83T
clk: sunxi: Add apb0 gates for A83T
clk: sunxi: rewrite sun8i-a23-mbus-clk using the simpler composite clk
clk: sunxi: rewrite sun6i-ar100 using factors clk
clk: sunxi: rewrite sun6i-a31-ahb1-clk using factors clk with custom recalc
clk: sunxi: factors: Drop round_rate from clk ops
clk: sunxi: factors: Support custom formulas
clk: sunxi: factors: Consolidate get_factors parameters into a struct
...
The offset seems to have been copied from the sata clk. Fix it so
that enabling the crypto engine source clk works.
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 5f775498bd ("clk: qcom: Fully support apq8064 global clock control")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
drivers/clk/ti/clk-814x.c:34:12: warning: symbol 'dm814x_adpll_early_init' was not declared. Should it be static?
drivers/clk/ti/clk-814x.c:58:12: warning: symbol 'dm814x_adpll_enable_init_clocks' was not declared. Should it be static?
drivers/clk/ti/adpll.c:465 ti_adpll_recalc_rate() warn: should '__readw(d->regs + 20) << 18' be a 64 bit type?
drivers/clk/ti/adpll.c:945 ti_adpll_probe() error: we previously assumed 'd->clocks' could be null (see line 921)
The last one looks like a real bug because we don't return an
error on allocation failure.
Cc: Tero Kristo <t-kristo@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The arch independent drivers can be build testeed with
COMPILE_TEST. Let's allow that for drivers/clk/ti.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
On dm814x we have 13 ADPLLs with 3 to 4 outputs on each. The
ADPLLs have several dividers and muxes controlled by a shared
control register for each PLL.
Note that for the clocks to work as device drivers for booting on
dm814x, this patch depends on "ARM: OMAP2+: Change core_initcall
levels to postcore_initcall" that has already been merged.
Also note that this patch does not implement clk_set_rate for the
PLL, that will be posted later on when available.
Cc: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
The clk_rcg_pixel_set_rate clk_op sets up the pre-divider by reading
its current value from the NS register.
Using the pre-divider wasn't really intended when creating these ops.
The pixel RCG was only intended to achieve fractional multiplication
provided in the pixel_table array. Leaving the pre-divider to the
existing register value results in a wrong pixel clock when the
bootloader sets up the display. This was left unidentified because
the IFC6410 Plus board on which this was verified didn't have a
bootloader that configured the display.
Don't set the RCG pre-divider in freq_tbl to the existing NS register
value. Force it to 1 and only use the M/N counter to achieve the desired
fractional multiplication.
Cc: Vinay Simha <vinaysimha@inforcecomputing.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add the necessary clock to use the KPP interface on i.MX6UL.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Sparse complains here because we dropped the __iomem annotation
when casting the aligned address. Add __iomem back so that sparse
stops complaining.
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: <uclinux-h8-devel@lists.sourceforge.jp>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Change the types here to unsigned int instead of int and update
the checks for == 0 instead < 1 to be more explicit about what's
going on now that of_clk_get_parent_count() has changed return
types.
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The return type of of_clk_get_parent_count() is an unsigned int
now, so let's update the code here to be more explicit about the
range of values we can test for.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The checks for < 0 are impossible now that
of_clk_get_parent_count() returns an unsigned int. Simplify the
code and update the types.
Cc: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The checks for < 1 can be simplified now that
of_clk_get_parent_count() returns an unsigned int. Update the
code to reflect the int to unsigned int change.
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: <uclinux-h8-devel@lists.sourceforge.jp>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The check for < 0 is impossible now that
of_clk_get_parent_count() returns an unsigned int. Simplify the
code and update the type here.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
These checks for < 0 are impossible now that
of_clk_get_parent_count() returns an unsigned int. Change the
checks for == 0 and update the type.
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Russell King recently pointed out a bug in the clk-gpio code
where it fails to register the clk if of_clk_get_parent_count()
returns an error because the "clocks" property isn't present in
the DT node. If we're trying to count parents from DT we'd like
to know the count, not if there is a "clocks" property or not.
Furthermore, some drivers are assigning the return value to their
clk_init_data::num_parents member which is unsigned, leading to
potentially large numbers of parents when the property isn't
present.
Let's change the API to return an unsigned int instead of an int.
All the callers just want to know the count anyway, and this
avoids the bug that was in the clk-gpio driver.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
of_clk_init() uses for_each_matching_node_and_match() to find clock
providers, which returns all matching device nodes, whether they are
enabled or not. Hence clock providers that are disabled explicitly in DT
using e.g.
"status = "disabled";
are still activated.
Add a check to ignore device nodes that are not enabled, like
of_irq_init() does.
Reported-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
cpg_div6_clock_set_rate() only programs the new divisor if the clock
isn't stopped. If the clock is stopped, it will update the cached
divisor value only, which will be programmed into the clock registers
when enabling the clock later.
However, cpg_div6_clock_recalc_rate() reads the divisor from the clock
registers instead of using the cached value, leading to an incorrect
result if the clock is currently stopped.
Make cpg_div6_clock_recalc_rate() use the cached value to fix this.
Reported-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
The parent clock isn't documented in the datasheet, use S2D1 as a best
guess for now.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Let's compare the degrees from clk_set_rate with
clk->core->phase. If the requested degrees is already
there, skip the following steps.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[sboyd@codeaurora.org: s/drgrees/degrees/ in commit text]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
During the initial conversion to the newly introduced combined fractional
dividers+muxes the rk3368 clocks were left out, so convert them now.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds the needed clocks for rk3228 tsadc.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As of 9b5ba0df4e ("ARM: shmobile: Introduce ARCH_RENESAS") all platforms
that use Renesas clock drivers now select ARCH_RENESAS. As it is present in
drivers/clk/Makefile ARCH_SHMOBILE_MULTI may now be removed.
This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
clocks definition, dropping read-only registers
from the suspend/resume register save/restore list
and exposition of two clocks required for the
exynos5433 HDMI subsystem operation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=B/4a
-----END PGP SIGNATURE-----
Merge tag 'clk-samsung-4.6' of git://linuxtv.org/snawrocki/samsung into clk-next
Pull Samsung clk driver changes from Sylwester Nawrocki:
Mostly correction of errors in the exynos5433 SoC
clocks definition, dropping read-only registers
from the suspend/resume register save/restore list
and exposition of two clocks required for the
exynos5433 HDMI subsystem operation.
* tag 'clk-samsung-4.6' of git://linuxtv.org/snawrocki/samsung:
clk: samsung: exynos5433: Fix wrong registers of PCLK_GSCL_SMMU clocks
clk: samsung: exynos5433: Fix mout_aclk_cam1*_user clocks definition
clk: samsung: exynos5433: Drop RO registers from the save/restore lists
clk: samsung: exynos5433: Fix definitions of SCLK ISP SENSOR0 clocks
clk: samsung: exynos5433: Fix definitions of MUX_SEL_CAM04 clocks
clk: samsung: exynos5433: Fix typos in *_ISP_MPWM clock names
clk/samsung: exynos5433: add pclk_decon clock
clk/samsung: exynos5433: add definitions of HDMI-PHY output clocks
The core clock does not depend on corediv, so enabling corediv
based on the clock is not really correct. Move the corediv
config option from the clock driver Kconfig to the mvebu Kconfig
so that it can be enabled by the MACH option instead.
This also enables corediv on Armada 375 and 38X, which was
previously missing.
Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
There is no corediv clock on Armada XP, so this is unnecessary.
Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Despite care take to allocate clocks state containers the
SP810 driver actually just supports creating one instance:
all clocks registered for every instance will end up with the
exact same name and __clk_init() will fail.
Rename the timclken<0> .. timclken<n> to sp810_<instance>_<n>
so every clock on every instance gets a unique name.
This is necessary for the RealView PBA8 which has two SP810
blocks: the second block will not register its clocks unless
every clock on every instance is unique and results in boot
logs like this:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at ../drivers/clk/versatile/clk-sp810.c:137
clk_sp810_of_setup+0x110/0x154()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted
4.5.0-rc2-00030-g352718fc39f6-dirty #225
Hardware name: ARM RealView Machine (Device Tree Support)
[<c00167f8>] (unwind_backtrace) from [<c0013204>]
(show_stack+0x10/0x14)
[<c0013204>] (show_stack) from [<c01a049c>]
(dump_stack+0x84/0x9c)
[<c01a049c>] (dump_stack) from [<c0024990>]
(warn_slowpath_common+0x74/0xb0)
[<c0024990>] (warn_slowpath_common) from [<c0024a68>]
(warn_slowpath_null+0x1c/0x24)
[<c0024a68>] (warn_slowpath_null) from [<c051eb44>]
(clk_sp810_of_setup+0x110/0x154)
[<c051eb44>] (clk_sp810_of_setup) from [<c051e3a4>]
(of_clk_init+0x12c/0x1c8)
[<c051e3a4>] (of_clk_init) from [<c0504714>]
(time_init+0x20/0x2c)
[<c0504714>] (time_init) from [<c0501b18>]
(start_kernel+0x244/0x3c4)
[<c0501b18>] (start_kernel) from [<7000807c>] (0x7000807c)
---[ end trace cb88537fdc8fa200 ]---
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Fixes: 6e973d2c43 "clk: vexpress: Add separate SP810 driver"
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This config was used for the ARM port so that it could use a
machine specific clkdev.h include, but those are all gone now.
The MIPS architecture is the last user, and from what I can tell
it doesn't actually use it anyway, so let's remove the config all
together.
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: <linux-mips@linux-mips.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Joshua Henderson <joshua.henderson@microchip.com>
This patch adds support for the global clock controller found on
the IPQ4019 based devices. This includes UART, I2C, SPI etc.
Signed-off-by: Pradeep Banavathi <pradeepb@codeaurora.org>
Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
[sboyd@codeaurora.org: Drop 0x16024 enable_reg in crypto_ahb]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We forgot to free this clock when we return early in this code.
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This patch adds support for APB0 in H3. It seems to be compatible with
earlier SOCs. apb0 gates controls R_ block peripherals (R_PIO, R_IR,
etc).
Since this gates behave just like any Allwinner clock gate, add a generic
compatible that can be reused if we don't have any clock to protect.
Signed-off-by: Krzysztof Adamski <k@japko.eu>
[Maxime: Removed the H3 compatible from the simple-gates driver, reworked
the commit log a bit]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This fixes register assignment in the CLK_PCLK_SMMU_GSCL{1,2}
clocks definition.
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Control bits for the ACLK_CAM1_552_USER and ACLK_CAM1_400_USER
mux clocks are in MUX_SEL_CAM10, not MUX_SEL_CAM01 register.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
This fixes bit field offsets in the CMU_TOP CLK_DIV_SCLK_ISP_SENSOR_{A,B}
clock definitions.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
This corrects assignment of bit offsets of the MUX_SEL_CAM04 register
to the respective mux clocks.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
We were not checking the return from devm_add_action() which can fail.
Start using the helper devm_add_action_or_reset() and return directly
as we know that the cleanup has been done by this helper.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
__clk_init() was renamed to __clk_core_init() but these comments
weren't updated.
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This reverts commit 858d588156.
Joachim reports that this commit breaks lpc18xx boot. This is
because the hardware has circular clk topology where PLLs can
feed into dividers and the same dividers can feed into the PLLs.
The hardware is designed this way so that you can choose to put
the divider before the PLL or after the PLL depending on what you
configure to be the parent of the divider and what you configure
to be the parent of the PLL.
So let's drop this patch for now because we have hardware that
actually has loops. A future patch could check for circular
parents when we change parents and fail the switch, but that's
probably best left to some debugging Kconfig option so that we
don't suffer the sanity checking cost all the time.
Reported-by: Joachim Eastwood <manabian@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
There are some Arria10 clocks of type "altr,socfpga-a10-perip-clk" that can
have multiple parents. Fix up the __socfpga_periph_init() to call
of_clk_parent_fill() that will return the appropriate number of parents.
Also, update __socfpga_gate_init() to call of_clk_parent_fill() helper
function.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Convert DPLL support code to use clk_hw pointers for reference and bypass
clocks. This allows us to use clk_hw_* APIs for accessing any required
parameters for these clocks, avoiding some locking problems at least with
DPLL enable code; this used clk_get_rate which uses mutex but isn't
good under clk_enable / clk_disable.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This patch corrects the enable register offset which is actually 0x36cc
instead of 0x36c4
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 5f775498bd ("clk: qcom: Fully support apq8064 global clock control")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
As the code in this file is being executed within irq context in some
cases, we must avoid the clk_get_rate which uses mutex internally.
Switch the code to use clk_hw_get_rate instead which is non-locking.
This fixes an issue where PM runtime will hang the system if enabled
with a serial console before a suspend-resume cycle.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Fixes: a53ad8ef3d ("clk: ti: Convert to clk_hw based provider APIs")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Currently the Exynos5433 (ARMv8 SoC) clock driver depends on ARCH_EXYNOS
so it is built also on ARMv7. This does not bring any kind of benefit.
There won't be a single kernel image for ARMv7 and ARMv8 SoCs (like
multi_v7 for ARMv7).
Instead build clock drivers only for respective SoC's architecture.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
We catch errors in the base clock registration, failure to ioremap
and failures in the final of_clk_add_provider() call.
Also we unmap the registers when we need to rollback.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
We now report a failing ioremap, failing output names parsing,
failures in table registration and in the final step.
Also there was a bug where clk_register_divider_table() would return
an ERR_PTR value instead of NULL, which we were checking for.
We now implement proper rollback in case of an error.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
We now catch and report a failing ioremap, also a failure in the final
step of the clock registration is now handled and reported.
Also warnings are turned into errors.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
We mis-merged the original patch from Russell here and so the
patch went almost all the way, except that we still failed to
probe when there wasn't a clocks property in the DT node. Allow
that case by making a negative value from
of_clk_get_parent_count() into "no parents", like the original
patch did.
Fixes: 7ed88aa2ef ("clk: fix clk-gpio.c with optional clock= DT property")
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add the "intc-ex" clock to the r8a7795 CPG MSSR driver.
According to information from the hardware team the INTC-EX
parent clock is CP. The next data sheet version will include
this information.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Export symbol of_clk_get_from_provider so it can be used in
loadable kernel modules
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Over time, some includes were copy pasted from other clocks drivers but are
not necessary.
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Capacities only handles interrupts and they are not use anymore. Remove the
whole initialisation.
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
at91_pmc_base is not used anymore, remove it along with at91_pmc_read and
at91_pmc_write.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Avoid using code from clk/at91 for PM.
This also has the bonus effect of setting arm_pm_idle for sama5 platforms.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
pmc.c is now the only user of struct at91_pmc*, move their definition in
the C file.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
at91_pmc_init() doesn't do much anymore, merge it in atmel_pmc_probe().
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
The AT91 clock drivers make use of IRQs to avoid polling when waiting for
some clocks to be enabled. Unfortunately, this leads to a crash when those
IRQs are threaded (which happens when using preempt-rt) because they are
registered before thread creation is possible.
Use polling on those clocks instead to avoid the problem.
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Use the regmap coming from syscon to access the registers instead of using
pmc_read/pmc_write. This allows to avoid passing the at91_pmc structure to
the child nodes of the PMC.
The final benefit is to have each clock register itself instead of having
to iterate over the children.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The PMC block is providing several functionnalities:
- system clk management
- cpuidle
- platform suspend
Replace the void __iomem *regs field by a regmap (retrieved using syscon)
so that we can later share the regmap across several drivers without
exporting a new specific API or a global void __iomem * variable.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Enable the COMPILE_TEST to get build coverage of some of Samsung clock
controller drivers. Still some of them will be built only if
appropriate SoC is chosen (like SOC_EXYNOS4415 or ARCH_S3C64XX).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
We were rolling this ourselves, but clk-divider can do it now.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Our dividers weren't being set successfully because CM_PASSWORD wasn't
included in the register write. It looks easier to just compute the
divider to write ourselves than to update clk-divider for the ability
to OR in some arbitrary bits on write.
Fixes about half of the video modes on my HDMI monitor (everything
except 720x400).
Cc: stable@vger.kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Many callers either use NULL or const strings for the third argument of
clk_register_clkdev. For those that do not and use a non-const string,
this is a risk for format strings being accidentally processed (for
example in device names). As this interface is already used as if it
weren't a format string (prints nothing when NULL), and there are zero
users of the format strings, remove the format string interface to make
sure format strings will not leak into the clkdev.
$ git grep '\bclk_register_clkdev\b' | grep % | wc -l
0
Unfortunately, all the internals expect a va_list even though they treat
a NULL format string as special. To deal with this, we must pass either
(..., "%s", string) or (..., NULL) so that a the va_list will be created
correctly (passing the name as an argument, not as a format string).
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The APB0 clock on A23 is a zero-based divider, not a power-of-two based
divider.
Note that this patch does not apply cleanly to kernels before 4.5-rc1,
which added CLK_OF_DECLARE support to this driver.
Fixes: 57a1fbf284 ("clk: sunxi: Add A23 APB0 divider clock support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Fix the issue reported by checkpatch:
ERROR: space prohibited before that ',' (ctx:WxW)
+ writel(clksel->val , cpuclk->reg_base + clksel->reg);
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Avoid return NULL if rockchip_clk_register_mmc fails, otherwise
rockchip_clk_register_branches print "unknown clock type". The acutal
case is that it's a known clock type but we fail to regiser it, which
may makes user confuse the reason of failure.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Avoid return NULL if rockchip_clk_register_inverter fails, otherwise
rockchip_clk_register_branches print "unknown clock type". The acutal
case is that it's a known clock type but we fail to regiser it, which
may makes user confuse the reason of failure.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
rockchip_clk_get_grf pass on return value from
syscon_regmap_lookup_by_phandle, so we check grf to
make sure whether to do the following things or not.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
to be able to also declare factor clocks in their correct
place in the clock tree instead of having to register factor
clocks in the init callback separately. And as always some more
clock-ids and non-regression fixes for mistakes introduced in
past kernel releases.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJWuwINAAoJEPOmecmc0R2BUgMIAKmXROUpwuap5hhDv+XapDyc
drU3DmOwFQeIiaODZQVFlx8CcXUN6h/8cPZnc4Qd/ChO73TxfvtWY3S7n0n3F/EH
RIceQ30OHTUEYh/k449Sf/sTEOW68h4TdhaVrw2gJYKsJ5fg2ih5o6naWnWWE6Ig
WUh+xeeYdG6L8hCLcUA8sujE3EpG5kJelnWiMBedx6CbuTSSfJcB9tTkg1eOa/R+
jyBgYJJSuSEwG4mJijV61tanZw1FhWu+i4dEAGHkWgimuGekO4CEnRRczZ1hw7x2
O/cBfpLW4D2iGMlrvyUhcB/pe/TmRdz4SfzDSTwLPtpCfqEiZRmxH4mwW4s8hv4=
=igdK
-----END PGP SIGNATURE-----
Merge tag 'v4.6-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Introduction of a factor type and a variant containing a gate
to be able to also declare factor clocks in their correct
place in the clock tree instead of having to register factor
clocks in the init callback separately. And as always some more
clock-ids and non-regression fixes for mistakes introduced in
past kernel releases.
most of the clock tree structures on i.MX6 Quad Plus are
same as on i.MX6Q. there still some differences between
these two SOCs. compared to the i.XM6Q, the differents of
clocks on i.MX6QP is mainly on:
1. New clock gate added to support the PRE and PRG modules
2. 24MHz OSC clock option added to the UART, IPG, ECSPI, and
CAN clock roots.
3. MMDC channel 1 clock gate is now controllable.
4. clock gating added to the LDB_DIx_IPU clocks on i.MX6QP
5. EMI clock root divider fix
6. other updates fo CSCMRx, CSCDRx and CS2CDR registers.
detailed infomation, please refer to the i.MX6QP RM.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This reverts commit 329cabcecf.
The commit that caused us to specify LE device endianness here,
29bb45f25f (regmap-mmio: Use native endianness for read/write,
2015-10-29), has been reverted in mainline so now when we specify
LE it actively breaks big endian kernels because the byte
swapping in regmap-mmio is incorrect. Let's revert this change
because it will 1) fix the big endian kernels and 2) be redundant
to specify LE because that will become the default soon.
Cc: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
With gdsc driver capable of handling hierarchical power domains,
specify oxili_gdsc as parent of oxilicx_gdsc.
Remove all direct calls to genpd from the mmcc clock driver. The
adding and removing of subdomains is now handled from within
the gdsc driver.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add all gdsc data which are part of mmcc on msm8996 family
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add all data for the GDSCs which are part of msm8996 GCC block
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Some gdscs might be controlled via voting registers and might not
really disable when the kernel intends to disable them (due to other
votes keeping them enabled)
Mark these gdscs with a flag for we do not check/wait on a disable
status for these gdscs within the kernel disable callback.
Also at boot, if these GDSCs are found to be ON, we make sure we
vote for them before we inform the genpd framework about their
status. If genpd gets no users, it then disables (removes the vote)
them as part of genpd_poweroff_unused()
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Some gdsc power domains can have a gds_hw_controller block inside
to help ensure all slave devices within the power domain are idle
before the gdsc is actually switched off.
This is mainly useful in power domains which host a MMU, in which
case its necessary to make sure there are no outstanding MMU operations
or pending bus transactions before the power domain is turned off.
In gdscs with gds_hw_controller block, its necessary to check the
gds_hw_ctrl status bits instead of the ones in gdscr, to determine
the state of the powerdomain.
While at it, also move away from using jiffies and use ktime APIs
instead for busy looping on status bits.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Some qcom SoCs' can have hierarchical power domains. Let the gdsc structs
specify the parents (if any) and the driver add genpd subdomains for them.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Now that our protection code doesn't use the global name lookup anymore, we
can remove the clkdev registrations.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The current clock registration and protection code has a few drawbacks, the
two main ones being that we create a lot of orphans clock in the
registration phase, which will be troublesome when we will start being less
relaxed about them.
The protection code also relies on clkdev, which we don't really use but
for this particular case.
Fix both at the same time by moving everyone to the CLK_OF_DECLARE that
will probe our clock tree in the right and thus avoid orphans, and by
protecting directly the clock returned by our registration function.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
All the data structure that we pass to the clocks setup functions are
declared const, while our setup functions expects a regular pointer. This
was hidden by the fact that we cast a void * pointer back to these
structures, which made it go unnoticed.
Fix the functions prototype.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The clocks registration code in clk-sunxi was most of the time not
returning the struct clk (or struct clk array) that was registered,
preventing the users of such functions to manipulate it, for example to
protect it.
Make them return it so that we can start using it.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch add the support to setup the HCLK PLL output
using the "assigned-clock-rates" parameter in the device tree.
If the option is not use, the clock setup by the kickstart
and/or bootloader remain unchanged.
The previous kernel version did not change the clock frequency
output setup by the kickstart and/or bootloader;
this version always setup the clock frequency output to 208MHz.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The Versatile syscon ICST driver OR:s the bits into place but
forgets to mask the previous value, making the code only work
if the register is zero or giving haphazard results. Mask the
19 bits used by the Versatile syscon interface register.
Regression caused and now fixed by yours truly.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Fixes: 179c8fb3c2 ("clk: versatile-icst: convert to use regmap")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The following errors are display in the console during the power-on:
[ 0.000000] lpc32xx_usb_clk_init: failed to register (null) clock: -12
[ 0.000000] lpc32xx_clk_init: failed to register (null) clock: -12
There is no need to register clock "0"; the first clock used is 1;
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
[sboyd@codeaurora.org: s/prepare/register/]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Before commit b3d192d5121f ("clk: simplify __clk_init_parent()"),
__clk_init_parent() called .get_parent() only for multi-parent
clocks. That commit changed the behavior to call .get_parent()
if available even for single-parent clocks and root clocks.
It turned out a problem because there are some single-parent clocks
that implement .get_parent() callback and return non-zero index.
The SOCFPGA clock is the case; the commit broke the SOCFPGA boards.
To keep the original behavior, invoke .get_parent() only when
num_parents is greater than 1.
Fixes: b3d192d5121f ("clk: simplify __clk_init_parent()")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reported-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We were not checking the return from devm_add_action() which can fail.
Start using the helper and devm_add_action_or_reset() and return
directly as we know that the cleanup has been done by this helper.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
As preparation for arm64 based mesongxbb, which pulls in this code once
enabling ARCH_MESON, fix a size_t vs. unsigned int type mismatch.
The loop uses a local unsigned int variable, so adopt that type,
matching the header.
Fixes: 7a29a86943 ("clk: meson: Add support for Meson clock controller")
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
clang found a bug with the __socfpga_pll_init definition:
drivers/clk/socfpga/clk-pll-a10.c:77:15: error: '__section__' attribute only applies to functions and
global variables
This moves the __init annotation to the right place so the function
actually gets discarded.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
There are two TI CDCE clock chips in this file. Move them close
together so they're easier to find.
No functional change, just cosmetic.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
[sboyd@codeaurora.org: Alphabetize]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk-fixes:
clk: tegra: super: Fix sparse warnings for functions not declared as static
clk: tegra: Fix sparse warnings for functions not declared as static
clk: tegra: Fix sparse warning for pll_m
clk: tegra: Use definition for pll_u override bit
clk: tegra: Fix warning caused by pll_u failing to lock
clk: tegra: Fix clock sources for Tegra210 EMC
clk: tegra: Add the APB2APE audio clock on Tegra210
clk: tegra: Add missing of_node_put()
clk: tegra: Fix PLLE SS coefficients
clk: tegra: Fix typos around clearing PLLE bits during enable
clk: tegra: Do not disable PLLE when under hardware control
clk: tegra: Fix pllx dyn step calculation
clk: tegra: pll: Fix potential sleeping-while-atomic
clk: tegra: Fix the misnaming of nvenc from msenc
clk: tegra: Fix naming of MISC registers
clk: tegra: Remove improper flags for lock_enable
clk: tegra: Fix divider on VI_I2C
This set contains a bunch of miscellaneous fixes that have accumulated
over the past couple of weeks, primarily for the Tegra210 support added
in v4.5-rc1.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=zdPz
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.5-clk-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-fixes
Pull tegra fixes from Thierry Reding:
clk: tegra: Fixes for v4.5-rc3
This set contains a bunch of miscellaneous fixes that have accumulated
over the past couple of weeks, primarily for the Tegra210 support added
in v4.5-rc1.
* tag 'tegra-for-4.5-clk-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
clk: tegra: super: Fix sparse warnings for functions not declared as static
clk: tegra: Fix sparse warnings for functions not declared as static
clk: tegra: Fix sparse warning for pll_m
clk: tegra: Use definition for pll_u override bit
clk: tegra: Fix warning caused by pll_u failing to lock
clk: tegra: Fix clock sources for Tegra210 EMC
clk: tegra: Add the APB2APE audio clock on Tegra210
clk: tegra: Add missing of_node_put()
clk: tegra: Fix PLLE SS coefficients
clk: tegra: Fix typos around clearing PLLE bits during enable
clk: tegra: Do not disable PLLE when under hardware control
clk: tegra: Fix pllx dyn step calculation
clk: tegra: pll: Fix potential sleeping-while-atomic
clk: tegra: Fix the misnaming of nvenc from msenc
clk: tegra: Fix naming of MISC registers
clk: tegra: Remove improper flags for lock_enable
clk: tegra: Fix divider on VI_I2C
We don't use CLK_IS_ROOT but in a few places in the common clk
framework core. Let's replace those checks with a check for the
number of parents a clk has instead of the flag, freeing up one
flag for something else. We don't remove the flag yet so that
things keep building, but we'll remove it once all drivers have
removed their flag usage.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
clk_get() for DT based clks already returns EPROBE_DEFER when the
OF clk provider is not present. So having all this code in the
clk provider to return EPROBE_DEFER when the gpio isn't ready yet
can be replaced with a platform driver that doesn't add the clk
provider until the gpio can be requested. Get rid of the
OF_CLK_DECLARE and convert this to a platform driver instead.
Tested-by: Jyri Sarha <jsarha@ti.com>
Cc: Sergej Sawazki <ce3a@gmx.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Jon Nettleton <jon@solid-run.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clean up the init code and move the creation of factor clocks to the
appropriate positions coming from the clock architecture diagrams.
This also unifies the artificial separation of the hclk_vcodec etc clocks
again.
We do keep the separate definition of some watchdog and usb480m pseudo
clocks for now, as they're not real factor clocks from the clock-tree
but placeholders for fixes to come (usb480m gets supplied by the
missing driver for the new usbphy type and the watchdog-gate is sitting
somewhere else together which we cannot model currently).
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add a clock type for fixed factor clocks. This allows us to define fixed
factor clocks where they appear in the clock hierarchy instead of in the
init function.
The additional factor_gate type, finally allows us to model some last
parts of the clock tree correctly.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
hclk_vcodec is a child of aclk_vcodec with the fixed factor clock
hclk_vcodec_pre in between and not a child of hclk_disp_pre.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Andrew Bresticker