The revmap type should be linear for irq_domain_add_linear function.
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
A large proportion of interrupt controllers that support legacy mappings
do so because non-DT systems need to use fixed IRQ numbers when registering
devices via buses but can otherwise use a linear mapping. The interrupt
controller itself typically is not affected by the mapping used and best
practice is to use a linear mapping where possible so drivers frequently
select at runtime depending on if a legacy range has been allocated to
them.
Standardise this behaviour by providing irq_domain_register_simple() which
will allocate a linear mapping unless a positive first_irq is provided in
which case it will fall back to a legacy mapping. This helps make best
practice for irq_domain adoption clearer.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
In (the unlikely) case our continuation merge buffer is busy, we unfortunately
can not merge further continuation printk()s into a single record and have to
store them separately, which leads to split-up output of these lines when they
are printed.
Add some flags about newlines and prefix existence to these records and try to
reconstruct the full line again, when the separated records are printed.
Reported-By: Michael Neuling <mikey@neuling.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Tested-By: Michael Neuling <mikey@neuling.org>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While refactoring cgroup file removal path, 05ef1d7c4a "cgroup:
introduce struct cfent" incorrectly changed the @dir argument of
simple_unlink() to the inode of the file being deleted instead of that
of the containing directory.
The effect of this bug is minor - ctime and mtime of the parent
weren't properly updated on file deletion.
Fix it by using @cgrp->dentry->d_inode instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Restore support for partial reads of any size on /proc/kmsg, in case the
supplied read buffer is smaller than the record size.
Some people seem to think is is ia good idea to run:
$ dd if=/proc/kmsg bs=1 of=...
as a klog bridge.
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44211
Reported-by: Jukka Ollila <jiiksteri@gmail.com>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
48ddbe1946 "cgroup: make css->refcnt clearing on cgroup removal
optional" allowed a css to linger after the associated cgroup is
removed. As a css holds a reference on the cgroup's dentry, it means
that cgroup dentries may linger for a while.
Destroying a superblock which has dentries with positive refcnts is a
critical bug and triggers BUG() in vfs code. As each cgroup dentry
holds an s_active reference, any lingering cgroup has both its dentry
and the superblock pinned and thus preventing premature release of
superblock.
Unfortunately, after 48ddbe1946, there's a small window while
releasing a cgroup which is directly under the root of the hierarchy.
When a cgroup directory is released, vfs layer first deletes the
corresponding dentry and then invokes dput() on the parent, which may
recurse further, so when a cgroup directly below root cgroup is
released, the cgroup is first destroyed - which releases the s_active
it was holding - and then the dentry for the root cgroup is dput().
This creates a window where the root dentry's refcnt isn't zero but
superblock's s_active is. If umount happens before or during this
window, vfs will see the root dentry with non-zero refcnt and trigger
BUG().
Before 48ddbe1946, this problem didn't exist because the last dentry
reference was guaranteed to be put synchronously from rmdir(2)
invocation which holds s_active around the whole process.
Fix it by holding an extra superblock->s_active reference across
dput() from css release, which is the dput() path added by 48ddbe1946
and the only one which doesn't hold an extra s_active ref across the
final cgroup dput().
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <4FEEA5CB.8070809@huawei.com>
Reported-by: shyju pv <shyju.pv@huawei.com>
Tested-by: shyju pv <shyju.pv@huawei.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
This reverts commit fa980ca87d. The
commit was an attempt to fix a race condition where a cgroup hierarchy
may be unmounted with positive dentry reference on root cgroup. While
the commit made the race condition slightly more difficult to trigger,
the race was still there and could be reliably triggered using a
different test case.
Revert the incorrect fix. The next commit will describe the race and
fix it correctly.
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <4FEEA5CB.8070809@huawei.com>
Reported-by: shyju pv <shyju.pv@huawei.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
We suppress printing kmsg records to the console, which are already printed
immediately while we have received their fragments.
Newly registered boot consoles print the entire kmsg buffer during
registration. Clear the console-suppress flag after we skipped the record
during its first storage, so any later print will see these records as usual.
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The /proc/kmsg read() interface is internally simply wired up to a sequence
of syslog() syscalls, which might are racy between their checks and actions,
regarding concurrency.
In the (very uncommon) case of concurrent readers of /dev/kmsg, relying on
usual O_NONBLOCK behavior, the recently introduced mutex might block an
O_NONBLOCK reader in read(), when poll() returns for it, but another process
has already read the data in the meantime. We've seen that while running
artificial test setups and tools that "fight" about /proc/kmsg data.
This restores the original /proc/kmsg behavior, where in case of concurrent
read()s, poll() might wake up but the read() syscall will just return 0 to
the caller, while another process has "stolen" the data.
This is in the general case not the expected behavior, but it is the exact
same one, that can easily be triggered with a 3.4 kernel, and some tools
might just rely on it.
The mutex is not needed, the original integrity issue which introduced it,
is in the meantime covered by:
"fill buffer with more than a single message for SYSLOG_ACTION_READ"
116e90b23f
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the recent split of facility and level into separate variables,
we miss the facility value (always 0 for kernel-originated messages)
in the syslog prefix.
On Tue, Jul 3, 2012 at 12:45 PM, Dan Carpenter <dan.carpenter@oracle.com> wrote:
> Static checkers complain about the impossible condition here.
>
> In 084681d14e ('printk: flush continuation lines immediately to
> console'), we changed msg->level from being a u16 to being an unsigned
> 3 bit bitfield.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Non-printable characters in the log data are hex-escaped to ensure safe
post processing. We need to escape a backslash we find in the data, to be
able to distinguish it from a backslash we add for the escaping.
Also escape the non-printable character 127.
Thanks to Miloslav Trmac for the heads up.
Reported-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function devkmsg_read/writev/llseek/poll/open()..., the function
raw_spin_lock/unlock is used, there is potential deadlock case happening.
CPU1: thread1 doing the cat /dev/kmsg:
raw_spin_lock(&logbuf_lock);
while (user->seq == log_next_seq) {
when thread1 run here, at this time one interrupt is coming on CPU1 and running
based on this thread,if the interrupt handle called the printk which need the
logbuf_lock spin also, it will cause deadlock.
So we should use raw_spin_lock/unlock_irq here.
Acked-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Although the C language allows you to break strings across lines, doing
this makes it hard for people to find the Linux kernel code corresponding
to a given console message. This commit therefore fixes broken strings
throughout RCU's source code.
Suggested-by: Josh Triplett <josh@joshtriplett.org>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The Linux kernel coding style says that single-statement blocks should
omit curly braces unless the other leg of the "if" statement has
multiple statements, in which case the curly braces should be included.
This commit fixes RCU's violations of this rule.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
bigrtm: First steps towards getting RCU out of the way of
tens-of-microseconds real-time response on systems compiled
with NR_CPUS=4096. Also cleanups for and increased concurrency
of rcu_barrier() family of primitives.
doctorture: rcutorture and documentation improvements.
fixes: Miscellaneous fixes.
fnh: RCU_FAST_NO_HZ fixes and improvements.
The recent bug that introduced the RCU callback list/count mismatch
showed the need for a diagnostic to check for this, which this commit
adds.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The pattern (np ? np->full_name : "<none>") is rather common in the
kernel, but can also make for quite long lines. This patch adds a new
inline function, of_node_full_name() so that the test for a valid node
pointer doesn't need to be open coded at all call sites.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Thanks to Charles Wang for spotting the defects in the current code:
- If we go idle during the sample window -- after sampling, we get a
negative bias because we can negate our own sample.
- If we wake up during the sample window we get a positive bias
because we push the sample to a known active period.
So rewrite the entire nohz load-avg muck once again, now adding
copious documentation to the code.
Reported-and-tested-by: Doug Smythies <dsmythies@telus.net>
Reported-and-tested-by: Charles Wang <muming.wq@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1340373782.18025.74.camel@twins
[ minor edits ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In dup_task_struct(), if arch_dup_task_struct() fails, the clean up
code fails to clean up correctly. That's because the clean up
code depends on unininitalized ti->task pointer. We fix this
by making sure that the task and thread_info know about each other
before we attempt to take the error path.
Signed-off-by: Salman Qazi <sqazi@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120626011815.11323.5533.stgit@dungbeetle.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull block bits from Jens Axboe:
"As vacation is coming up, thought I'd better get rid of my pending
changes in my for-linus branch for this iteration. It contains:
- Two patches for mtip32xx. Killing a non-compliant sysfs interface
and moving it to debugfs, where it belongs.
- A few patches from Asias. Two legit bug fixes, and one killing an
interface that is no longer in use.
- A patch from Jan, making the annoying partition ioctl warning a bit
less annoying, by restricting it to !CAP_SYS_RAWIO only.
- Three bug fixes for drbd from Lars Ellenberg.
- A fix for an old regression for umem, it hasn't really worked since
the plugging scheme was changed in 3.0.
- A few fixes from Tejun.
- A splice fix from Eric Dumazet, fixing an issue with pipe
resizing."
* 'for-linus' of git://git.kernel.dk/linux-block:
scsi: Silence unnecessary warnings about ioctl to partition
block: Drop dead function blk_abort_queue()
block: Mitigate lock unbalance caused by lock switching
block: Avoid missed wakeup in request waitqueue
umem: fix up unplugging
splice: fix racy pipe->buffers uses
drbd: fix null pointer dereference with on-congestion policy when diskless
drbd: fix list corruption by failing but already aborted reads
drbd: fix access of unallocated pages and kernel panic
xen/blkfront: Add WARN to deal with misbehaving backends.
blkcg: drop local variable @q from blkg_destroy()
mtip32xx: Create debugfs entries for troubleshooting
mtip32xx: Remove 'registers' and 'flags' from sysfs
blkcg: fix blkg_alloc() failure path
block: blkcg_policy_cfq shouldn't be used if !CONFIG_CFQ_GROUP_IOSCHED
block: fix return value on cfq_init() failure
mtip32xx: Remove version.h header file inclusion
xen/blkback: Copy id field when doing BLKIF_DISCARD.
If the nohz= boot parameter disables nohz, then RCU_FAST_NO_HZ needs to
also disable itself. This commit therefore checks for tick_nohz_enabled
being zero, disabling rcu_prepare_for_idle() if so. This commit assumes
that tick_nohz_enabled can change at runtime: If this is not the case,
then a simpler approach suffices.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, if several CPUs in the same package have all lazy RCU
callbacks, their wakeups will be uncorrelated. If all the CPUs are in the
same power domain (as is often the case), this will result in unnecessary
power-ups of the package. This commit therefore uses round_jiffies()
to round the timeouts to a second boundary, increasing the odds that
they can be coalesced with each other or with other timeouts.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The TINY_PREEMPT_RCU() function rcu_preempt_needs_cpu(), which is called
from rcu_needs_cpu(), assumes that it is in a quiescent state with respect
to the CPU. This is no longer the case. This commit therefore updates
rcu_preempt_needs_cpu() to make it aware that it is not running in a
quiescent state.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
Problems in RCU idle entry and exit are almost always confined to the
offending CPU. This commit therefore switches ftrace_dump() from
DUMP_ALL to DUMP_ORIG.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
If a CPU goes offline with callbacks queued, those callbacks might be
indefinitely postponed, which can result in a system hang. This commit
therefore inserts warnings for this condition.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
It is time to optimize CONFIG_TREE_PREEMPT_RCU's synchronize_rcu()
for uniprocessor optimization, which means that rcu_blocking_is_gp()
can no longer rely on RCU read-side critical sections having disabled
preemption. This commit therefore disables preemption across
rcu_blocking_is_gp()'s scan of the cpu_online_mask.
(Updated from previous version to fix embarrassing bug spotted by
Wu Fengguang.)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
An uninitialized string may be displayed at the end of the rcu_preempt
detected stall info such as
0: (1 GPs behind) idle=075/140000000000000/0 =8?^D=8?^D
^^^^^^^^^^
if CONFIG_RCU_FAST_NO_HZ is not defined.
This trivial patch clears the string in this case.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_is_cpu_idle() function is used if CONFIG_DEBUG_LOCK_ALLOC,
but TINY_RCU defines it only when CONFIG_PROVE_RCU. This causes
build failures when CONFIG_DEBUG_LOCK_ALLOC=y but CONFIG_PROVE_RCU=n.
This commit therefore adjusts the #ifdefs for rcu_is_cpu_idle() so
that it is defined when CONFIG_DEBUG_LOCK_ALLOC=y.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The __call_rcu() function is a bit overweight, so this commit splits
it into actual enqueuing of and accounting for the callback (__call_rcu())
and associated RCU-core processing (__call_rcu_core()).
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The __call_rcu() function will invoke the RCU core, for example, if
it detects that the current CPU has too many callbacks. However, this
can happen on an offline CPU that is on its way to the idle loop, in
which case it is an error to invoke the RCU core, and the excess callbacks
will be adopted in any case. This commit therefore adds checks to
__call_rcu() for running on an offline CPU, refraining from invoking
the RCU core in this case.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Although __call_rcu() is handled correctly when called from a momentary
non-idle period, if it is called on a CPU that RCU believes to be idle
on RCU_FAST_NO_HZ kernels, the callback might be indefinitely postponed.
This commit therefore ensures that RCU is aware of the new callback and
has a chance to force the CPU out of dyntick-idle mode when a new callback
is posted.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The CONFIG_TREE_PREEMPT_RCU and CONFIG_TINY_PREEMPT_RCU versions of
__rcu_read_lock() and __rcu_read_unlock() are identical, so this commit
consolidates them into kernel/rcupdate.h.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The _rcu_barrier() function accesses other CPUs' rcu_data structure's
->qlen field without benefit of locking. This commit therefore adds
the required ACCESS_ONCE() wrappers around accesses and updates that
need it.
ACCESS_ONCE() is not needed when a CPU accesses its own ->qlen, or
in code that cannot run while _rcu_barrier() is sampling ->qlen fields.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
There are a couple of open-coded initializations of the rcu_data
structure's RCU callback list. This commit therefore consolidates
them into a new init_callback_list() function.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The code that attempts to identify stalls that end just as we detect
them is broken by both flavors of initialization failure. This commit
therefore properly initializes and computes the count of the number
of reasons why the RCU grace period is stalled.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The current rcutorture rcu_barrier() testing never intentionally runs
more than one instance of rcu_barrier() at a given time. This fails
to test the the shiny new concurrency features of rcu_barrier(). This
commit therefore modifies the rcutorture fakewriter kthread to randomly
invoke rcu_barrier() rather than the usual synchronize_rcu().
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_torture_barrier() function has a copy-and-paste typo in the
string passed to rcutorture_shutdown_absorb(), which this commit fixes.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The child threads in the rcu_torture_barrier_cbs() are improperly
synchronized, which can cause the rcu_barrier() tests to hang. The
failure mode is as follows:
1. CPU 0 running in rcu_torture_barrier() sets barrier_cbs_count
to n_barrier_cbs.
2. CPU 1 running in rcu_torture_barrier_cbs() wakes up, posts
its RCU callback, and atomically decrements barrier_cbs_count.
Because barrier_cbs_count is not zero, it does not do the wake_up().
3. CPU 2 running in rcu_torture_barrier_cbs() wakes up, but
finds that barrier_cbs_count is not equal to n_barrier_cbs,
and so returns to sleep.
4. The value of barrier_cbs_count therefore never reaches zero,
which causes the test to hang.
This commit therefore uses a phase variable to coordinate the test,
preventing this scenario from occurring.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
SRCU now has a call_srcu() and an srcu_barrier(), but rcutorture does not
test them. This commit adds the machinery to allow rcutorture's existing
tests for call_rcu() and rcu_barrier() to apply to the SRCU equivalents.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Move the raw SRCU interfaces out of the middle of the normal SRCU
interfaces.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Before RCU had unified idle, the RCU_SAVE_DYNTICK leg of the switch
statement in force_quiescent_state() was dead code for CONFIG_NO_HZ=n
kernel builds. With unified idle, the code is never dead. This commit
therefore removes the "if" statement designed to make gcc aware of when
the code was and was not dead.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit applies the new for_each_rcu_flavor() macro to the
kernel/rcutree_trace.c file.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The arrival of TREE_PREEMPT_RCU some years back included some ugly
code involving either #ifdef or #ifdef'ed wrapper functions to iterate
over all non-SRCU flavors of RCU. This commit therefore introduces
a for_each_rcu_flavor() iterator over the rcu_state structures for each
flavor of RCU to clean up a bit of the ugliness.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
With the advent of __this_cpu_ptr(), it is no longer necessary to pass
both the rcu_state and rcu_data structures into __rcu_process_callbacks().
This commit therefore computes the rcu_data pointer from the rcu_state
pointer within __rcu_process_callbacks() so that callers can pass in
only the pointer to the rcu_state structure. This paves the way for
linking the rcu_state structures together and iterating over them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds an rcubarrier file to RCU's debugfs statistical tracing
directory, providing diagnostic information on rcu_barrier().
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds event tracing for _rcu_barrier() execution. This
is defined only if RCU_TRACE=y.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The traditional rcu_barrier() implementation has serialized all requests,
regardless of RCU flavor, and also does not coalesce concurrent requests.
In the past, this has been good and sufficient.
However, systems are getting larger and use of rcu_barrier() has been
increasing. This commit therefore introduces a counter-based scheme
that allows _rcu_barrier() calls for the same flavor of RCU to take
advantage of each others' work.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
For global variables, C defaults all fields to zero. The initialization
of the rcu_state structure's ->n_force_qs and ->n_force_qs_ngp fields
is therefore redundant, so this commit removes these initializations.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In order to allow each RCU flavor to concurrently execute its
rcu_barrier() function, it is necessary to move the relevant
state to the rcu_state structure. This commit therefore moves the
rcu_barrier_mutex global variable to a new ->barrier_mutex field
in the rcu_state structure.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In order to allow each RCU flavor to concurrently execute its
rcu_barrier() function, it is necessary to move the relevant
state to the rcu_state structure. This commit therefore moves the
rcu_barrier_completion global variable to a new ->barrier_completion
field in the rcu_state structure.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
In order to allow each RCU flavor to concurrently execute its rcu_barrier()
function, it is necessary to move the relevant state to the rcu_state
structure. This commit therefore moves the rcu_barrier_cpu_count global
variable to a new ->barrier_cpu_count field in the rcu_state structure.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
In order for multiple flavors of RCU to each concurrently run one
rcu_barrier(), each flavor needs its own per-CPU set of rcu_head
structures. This commit therefore moves _rcu_barrier()'s set of
per-CPU rcu_head structures from per-CPU variables to the existing
per-CPU and per-RCU-flavor rcu_data structures.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This is a preparatory commit for increasing rcu_barrier()'s concurrency.
It adds a pointer in the rcu_data structure to the corresponding call_rcu()
function. This allows a pointer to the rcu_data structure to imply the
function pointer, which allows _rcu_barrier() state to be placed in the
rcu_state structure.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Upcoming rcu_barrier() concurrency commits will result in line lengths
greater than 80 characters in the RCU_STATE_INITIALIZER(), so this commit
shortens the name of the macro's argument to prevent this.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcu_node tree array is sized based on compile-time constants,
including NR_CPUS. Although this approach has worked well in the past,
the recent trend by many distros to define NR_CPUS=4096 results in
excessive grace-period-initialization latencies.
This commit therefore substitutes the run-time computed nr_cpu_ids for
the compile-time NR_CPUS when building the tree. This can result in
much of the compile-time-allocated rcu_node array being unused. If
this is a major problem, you are in a specialized situation anyway,
so you can manually adjust the NR_CPUS, RCU_FANOUT, and RCU_FANOUT_LEAF
kernel config parameters.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Time to make the four-level-hierarchy setting less scary, so this
commit removes "Experimental" from the boot-time message. Leave the
message in order to get a heads-up on any possible need to expand to
a five-level hierarchy.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although making RCU_FANOUT_LEAF a kernel configuration parameter rather
than a fixed constant makes it easier for people to decrease cache-miss
overhead for large systems, it is of little help for people who must
run a single pre-built kernel binary.
This commit therefore allows the value of RCU_FANOUT_LEAF to be
increased (but not decreased!) via a boot-time parameter named
rcutree.rcu_fanout_leaf.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This reverts commit 616c310e83.
(Move PREEMPT_RCU preemption to switch_to() invocation).
Testing by Sasha Levin <levinsasha928@gmail.com> showed that this
can result in deadlock due to invoking the scheduler when one of
the runqueue locks is held. Because this commit was simply a
performance optimization, revert it.
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
With the introduction of suspend to both into in-kernel hibernation
code, dmesg was getting polluted with backspace characters printed as
part of image saving progress indicator. This patch introduces printing
of progress indicator on image save/load every 10% and one line at a
time. As an additional benefit, all other messages emitted by the kernel
during hibernation/thaw should now print cleanly as well.
Signed-off-by: Bojan Smojver <bojan@rexursive.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Change the behavior of the newly introduced
/sys/power/pm_print_times attribute so that its initial value
depends on initcall_debug, but setting it to 0 will cause device
suspend/resume times not to be printed, even if initcall_debug has
been set. This way, the people who use initcall_debug for reasons
other than PM debugging will be able to switch the suspend/resume
times printing off, if need be.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added a new knob called /sys/power/pm_print_times. Setting it to 1
enables printing of time taken by devices to suspend and resume.
Setting it to 0 disables this printing (unless overridden by
initcall_debug kernel command line option).
Signed-off-by: Sameer Nanda <snanda@chromium.org>
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
If function tracing is enabled for some of the low-level suspend/resume
functions, it leads to triple fault during resume from suspend, ultimately
ending up in a reboot instead of a resume (or a total refusal to come out
of suspended state, on some machines).
This issue was explained in more detail in commit f42ac38c59 (ftrace:
disable tracing for suspend to ram). However, the changes made by that commit
got reverted by commit cbe2f5a6e8 (tracing: allow tracing of
suspend/resume & hibernation code again). So, unfortunately since things are
not yet robust enough to allow tracing of low-level suspend/resume functions,
suspend/resume is still broken when ftrace is enabled.
So fix this by disabling function tracing during suspend/resume & hibernation.
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
It is often useful to suspend to memory after hibernation image has been
written to disk. If the battery runs out or power is otherwise lost, the
computer will resume from the hibernated image. If not, it will resume
from memory and hibernation image will be discarded.
Signed-off-by: Bojan Smojver <bojan@rexursive.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Fix kernel-doc warnings in printk.c: use correct parameter name.
Warning(kernel/printk.c:2429): No description found for parameter 'buf'
Warning(kernel/printk.c:2429): Excess function parameter 'line' description in 'kmsg_dump_get_buffer'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is a number of printk() fixes, specifically a few reported by the
crazy blog program that ships in SUSE releases (that's "boot log" and
not "web log", it predates the general "blog" terminology by many
years), and the restoration of the continuation line functionality
reported by Stephen and others. Yes, the changes seem a bit big this
late in the cycle, but I've been beating on them for a while now, and
Stephen has even optimized it a bit, so all looks good to me.
The other change in here is a Documentation update for the stable kernel
rules describing how some distro patches should be backported, to
hopefully drive a bit more response from the distros to the stable
kernel releases.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAk/uhJEACgkQMUfUDdst+ymL0QCfTjWJrdf+ooJ6Bx/NNgOGxYip
Ss0AnRrCNkfgmMcdNMn/7CIbHlaTj+S+
=M5Rg
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver Core fixes from Greg Kroah-Hartman:
"Here is a number of printk() fixes, specifically a few reported by the
crazy blog program that ships in SUSE releases (that's "boot log" and
not "web log", it predates the general "blog" terminology by many
years), and the restoration of the continuation line functionality
reported by Stephen and others. Yes, the changes seem a bit big this
late in the cycle, but I've been beating on them for a while now, and
Stephen has even optimized it a bit, so all looks good to me.
The other change in here is a Documentation update for the stable
kernel rules describing how some distro patches should be backported,
to hopefully drive a bit more response from the distros to the stable
kernel releases.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
printk: Optimize if statement logic where newline exists
printk: flush continuation lines immediately to console
syslog: fill buffer with more than a single message for SYSLOG_ACTION_READ
Revert "printk: return -EINVAL if the message len is bigger than the buf size"
printk: fix regression in SYSLOG_ACTION_CLEAR
stable: Allow merging of backports for serious user-visible performance issues
This patch adds the following structure:
struct netlink_kernel_cfg {
unsigned int groups;
void (*input)(struct sk_buff *skb);
struct mutex *cb_mutex;
};
That can be passed to netlink_kernel_create to set optional configurations
for netlink kernel sockets.
I've populated this structure by looking for NULL and zero parameters at the
existing code. The remaining parameters that always need to be set are still
left in the original interface.
That includes optional parameters for the netlink socket creation. This allows
easy extensibility of this interface in the future.
This patch also adapts all callers to use this new interface.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In reviewing Kay's fix up patch: "printk: Have printk() never buffer its
data", I found two if statements that could be combined and optimized.
Put together the two 'cont.len && cont.owner == current' if statements
into a single one, and check if we need to call cont_add(). This also
removes the unneeded double cont_flush() calls.
Link: http://lkml.kernel.org/r/1340869133.876.10.camel@mop
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When removing pages from the ring buffer, its state is not reset. This
means that the counters need to be correctly updated to account for the
pages removed.
Update the overrun counter to reflect the removed events from the pages.
Link: http://lkml.kernel.org/r/1340998301-1715-1-git-send-email-vnagarnaik@google.com
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The new_pages list head in the cpu_buffer is not initialized. When
adding pages to the ring buffer, if the memory allocation fails in
ring_buffer_resize, the clean up handler tries to free up the allocated
pages from all the cpu buffers. The panic is caused by referencing the
uninitialized new_pages list head.
Initializing the new_pages list head in rb_allocate_cpu_buffer fixes
this.
Link: http://lkml.kernel.org/r/1340391005-10880-1-git-send-email-vnagarnaik@google.com
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Continuation lines are buffered internally, intended to merge the
chunked printk()s into a single record, and to isolate potentially
racy continuation users from usual terminated line users.
This though, has the effect that partial lines are not printed to
the console in the moment they are emitted. In case the kernel
crashes in the meantime, the potentially interesting printed
information would never reach the consoles.
Here we share the continuation buffer with the console copy logic,
and partial lines are always immediately flushed to the available
consoles. They are still buffered internally to improve the
readability and integrity of the messages and minimize the amount
of needed record headers to store.
Signed-off-by: Kay Sievers <kay@vrfy.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Conflicts:
drivers/net/caif/caif_hsi.c
drivers/net/usb/qmi_wwan.c
The qmi_wwan merge was trivial.
The caif_hsi.c, on the other hand, was not. It's a conflict between
1c385f1fdf ("caif-hsi: Replace platform
device with ops structure.") in the net-next tree and commit
39abbaef19 ("caif-hsi: Postpone init of
HIS until open()") in the net tree.
I did my best with that one and will ask Sjur to check it out.
Signed-off-by: David S. Miller <davem@davemloft.net>
The ring buffer reader page is used to swap a page from the writable
ring buffer. If the writer happens to be on that page, it ends up on the
reader page, but will simply move off of it, back into the writable ring
buffer as writes are added.
The time stamp passed back to the readers is stored in the cpu_buffer per
CPU descriptor. This stamp is updated when a swap of the reader page takes
place, and it reads the current stamp from the page taken from the writable
ring buffer. Everytime a writer goes to a new page, it updates the time stamp
of that page.
The problem happens if a reader reads a page from an empty per CPU ring buffer.
If the buffer is empty, the swap still takes place, placing the writer at the
start of the reader page. If at a later time, a write happens, it updates the
page's time stamp and continues. But the problem is that the read_stamp does
not get updated, because the page was already swapped.
The solution to this was to not swap the page if the ring buffer happens to
be empty. This also removes the side effect that the writes on the reader
page will not get updated because the writer never gets back on the reader
page without a swap. That is, if a read happens on an empty buffer, but then
no reads happen for a while. If a swap took place, and the writer were to start
writing a lot of data (function tracer), it will start overflowing the ring buffer
and overwrite the older data. But because the writer never goes back onto the
reader page, the data left on the reader page never gets overwritten. This
causes the reader to see really old data, followed by a jump to newer data.
Link: http://lkml.kernel.org/r/1340060577-9112-1-git-send-email-dhsharp@google.com
Google-Bug-Id: 6410455
Reported-by: David Sharp <dhsharp@google.com>
tested-by: David Sharp <dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Replace the NR_CPUS array of buffer_iter from the trace_iterator
with an allocated array. This will just create an array of
possible CPUS instead of the max number specified.
The use of NR_CPUS in that array caused allocation failures for
machines that were tight on memory. This did not cause any failures
to the system itself (no crashes), but caused unnecessary failures
for reading the trace files.
Added a helper function called 'trace_buffer_iter()' that returns
the buffer_iter item or NULL if it is not defined or the array was
not allocated. Some routines do not require the array
(tracing_open_pipe() for one).
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a WARN_ON() output on test failures so that they are easier to detect
in automated tests. Although, the WARN_ON() will not print if the test
causes the system to crash, obviously.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The recent changes to the printk buffer management resulted in
SYSLOG_ACTION_READ to only return a single message, whereas previously
the buffer would get filled as much as possible. As, when too small to
fit everything, filling it to the last byte would be pretty ugly with
the new code, the patch arranges for as many messages as possible to
get returned in a single invocation. User space tools in at least all
SLES versions depend on the old behavior.
This at once addresses the issue attempted to get fixed with commit
b56a39ac26 ("printk: return -EINVAL if
the message len is bigger than the buf size"), and since that commit
widened the possibility for losing a message altogether, the patch
here assumes that this other commit would get reverted first
(otherwise the patch here won't apply).
Furthermore, this patch also addresses the problem dealt with in
commit 4a77a5a06e ("printk: use mutex
lock to stop syslog_seq from going wild"), so I'd recommend reverting
that one too (albeit there's no direct collision between the two).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kay Sievers <kay@vrfy.org>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit b56a39ac26.
A better patch from Jan will follow this to resolve the issue.
Acked-by: Kay Sievers <kay@vrfy.org>
Cc: Fengguang Wu <wfg@linux.intel.com>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b1420f1c (Make rcu_barrier() less disruptive) rearranged the
code in rcu_do_batch(), moving the ->qlen manipulation to follow
the requeueing of the callbacks. Unfortunately, this rearrangement
clobbered the value of the "count" local variable before the value
of rdp->qlen was adjusted, resulting in the value of rdp->qlen being
inaccurate. This commit therefore introduces an index variable "i",
avoiding the inadvertent multiplexing.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Commit 7ff9554bb5 (printk: convert
byte-buffer to variable-length record buffer) introduced a regression
by accidentally removing a "break" statement from inside the big
switch in printk's do_syslog(). The symptom of this bug is that the
"dmesg -C" command doesn't only clear the kernel's log buffer; it also
disables console logging.
This patch (as1561) fixes the regression by adding the missing
"break".
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change is meant to add a control for disabling early socket demux.
The main motivation behind this patch is to provide an option to disable
the feature as it adds an additional cost to routing that reduces overall
throughput by up to 5%. For example one of my systems went from 12.1Mpps
to 11.6 after the early socket demux was added. It looks like the reason
for the regression is that we are now having to perform two lookups, first
the one for an established socket, and then the one for the routing table.
By adding this patch and toggling the value for ip_early_demux to 0 I am
able to get back to the 12.1Mpps I was previously seeing.
[ Move local variables in ip_rcv_finish() down into the basic
block in which they are actually used. -DaveM ]
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf updates from Ingo Molnar.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ftrace: Make all inline tags also include notrace
perf: Use css_tryget() to avoid propping up css refcount
perf tools: Fix synthesizing tracepoint names from the perf.data headers
perf stat: Fix default output file
perf tools: Fix endianity swapping for adds_features bitmask
Pull two cgroup fixes from Tejun Heo:
"This containes two patches fixing a refcnt race bug during css_put().
Decrementing and checking the value weren't atomic and two tasks could
think that they both pushed the counter to zero."
* 'for-3.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroups: Account for CSS_DEACT_BIAS in __css_put
cgroup: make sure that decisions in __css_put are atomic
Here are some fixes for 3.5-rc4 that resolve the kmsg problems that
people have reported showing up after the printk and kmsg changes went
into 3.5-rc1. There are also a smattering of other tiny fixes for the
extcon and hyper-v drivers that people have reported.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAk/iNQcACgkQMUfUDdst+yklTQCfZCXFlhA43bZo/8Joqd2pLIIW
2uoAoMze0SlfJeN6Qu7yY0P+qV/f/pc3
=UNFY
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and printk fixes from Greg Kroah-Hartman:
"Here are some fixes for 3.5-rc4 that resolve the kmsg problems that
people have reported showing up after the printk and kmsg changes went
into 3.5-rc1. There are also a smattering of other tiny fixes for the
extcon and hyper-v drivers that people have reported.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'driver-core-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
extcon: max8997: Add missing kfree for info->edev in max8997_muic_remove()
extcon: Set platform drvdata in gpio_extcon_probe() and fix irq leak
extcon: Fix wrong index in max8997_extcon_cable[]
kmsg - kmsg_dump() fix CONFIG_PRINTK=n compilation
printk: return -EINVAL if the message len is bigger than the buf size
printk: use mutex lock to stop syslog_seq from going wild
kmsg - kmsg_dump() use iterator to receive log buffer content
vme: change maintainer e-mail address
Extcon: Don't try to create duplicate link names
driver core: fixup reversed deferred probe order
printk: Fix alignment of buf causing crash on ARM EABI
Tools: hv: verify origin of netlink connector message
During merging of PR_GET_TID_ADDRESS patch the code has been misplaced (it
happened to appear under PR_MCE_KILL) in result noone can use this option.
Fix it by moving code snippet to a proper place.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
find_new_reaper() changes pid_ns->child_reaper, see add0d4df ("pid_ns:
zap_pid_ns_processes: fix the ->child_reaper changing").
The original reason has gone away after the previous patch, ->children
list must be empty after zap_pid_ns_processes().
However now we can not switch to init_pid_ns.child_reaper.
__unhash_process() relies on the "->child_reaper == parent" check, but
this check does not work if the last exiting task is also the child
reaper.
As Eric sugested, we can change __unhash_process() to use the parent's
pid_ns and remove this code.
Also, with this change we can move detach_pid(PIDTYPE_PID) back, where it
was before the previous fix.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Louis Rilling <louis.rilling@kerlabs.com>
Cc: Mike Galbraith <efault@gmx.de>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Tested-by: Andrew Wagin <avagin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Today we have a twofold bug. Sometimes release_task on pid == 1 in a pid
namespace can run before other processes in a pid namespace have had
release task called. With the result that pid_ns_release_proc can be
called before the last proc_flus_task() is done using upid->ns->proc_mnt,
resulting in the use of a stale pointer. This same set of circumstances
can lead to waitpid(...) returning for a processes started with
clone(CLONE_NEWPID) before the every process in the pid namespace has
actually exited.
To fix this modify zap_pid_ns_processess wait until all other processes in
the pid namespace have exited, even EXIT_DEAD zombies.
The delay_group_leader and related tests ensure that the thread gruop
leader will be the last thread of a process group to be reaped, or to
become EXIT_DEAD and self reap. With the change to zap_pid_ns_processes
we get the guarantee that pid == 1 in a pid namespace will be the last
task that release_task is called on.
With pid == 1 being the last task to pass through release_task
pid_ns_release_proc can no longer be called too early nor can wait return
before all of the EXIT_DEAD tasks in a pid namespace have exited.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Louis Rilling <louis.rilling@kerlabs.com>
Cc: Mike Galbraith <efault@gmx.de>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Tested-by: Andrew Wagin <avagin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_exit() and exec_mmap() call sync_mm_rss() before mm_release() does
put_user(clear_child_tid) which can update task->rss_stat and thus make
mm->rss_stat inconsistent. This triggers the "BUG:" printk in check_mm().
Let's fix this bug in the safest way, and optimize/cleanup this later.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we fixed the race between atomic_dec and css_refcnt, we missed
the fact that css_refcnt internally subtracts CSS_DEACT_BIAS to get
the actual reference count. This can potentially cause a refcount leak
if __css_put races with cgroup_clear_css_refs.
Signed-off-by: Salman Qazi <sqazi@google.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Originally from Peter Zijlstra. The helper migrates perf events
from one cpu to another cpu.
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1339741902-8449-5-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Allow the pmu->event_init callback to change event->cpu, so the PMU driver
can choose the CPU on which to install events.
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1339741902-8449-4-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf_event_open() requires the cpu on which to install event is online,
but the cpu can go offline after perf_event_open checks that. Add a
get_online_cpus()/put_online_cpus() pair to avoid the race.
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1339741902-8449-3-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
An rmdir pushes css's ref count to zero. However, if the associated
directory is open at the time, the dentry ref count is non-zero. If
the fd for this directory is then passed into perf_event_open, it
does a css_get(). This bounces the ref count back up from zero. This
is a problem by itself. But what makes it turn into a crash is the
fact that we end up doing an extra dput, since we perform a dput
when css_put sees the ref count go down to zero.
css_tryget() does not fall into that trap. So, we use that instead.
Reproduction test-case for the bug:
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <linux/unistd.h>
#include <linux/perf_event.h>
#include <string.h>
#include <errno.h>
#include <stdio.h>
#define PERF_FLAG_PID_CGROUP (1U << 2)
int perf_event_open(struct perf_event_attr *hw_event_uptr,
pid_t pid, int cpu, int group_fd, unsigned long flags) {
return syscall(__NR_perf_event_open,hw_event_uptr, pid, cpu,
group_fd, flags);
}
/*
* Directly poke at the perf_event bug, since it's proving hard to repro
* depending on where in the kernel tree. what moved?
*/
int main(int argc, char **argv)
{
int fd;
struct perf_event_attr attr;
memset(&attr, 0, sizeof(attr));
attr.exclude_kernel = 1;
attr.size = sizeof(attr);
mkdir("/dev/cgroup/perf_event/blah", 0777);
fd = open("/dev/cgroup/perf_event/blah", O_RDONLY);
perror("open");
rmdir("/dev/cgroup/perf_event/blah");
sleep(2);
perf_event_open(&attr, fd, 0, -1, PERF_FLAG_PID_CGROUP);
perror("perf_event_open");
close(fd);
return 0;
}
Signed-off-by: Salman Qazi <sqazi@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20120614223108.1025.2503.stgit@dungbeetle.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There isn't a really compelling reason to force ->map to be populated,
so allow it to be left unset.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <rob.herring@calxeda.com>
Just like what devkmsg_read() does, return -EINVAL if the message len is
bigger than the buf size, or it will trigger a segfault error.
Acked-by: Kay Sievers <kay@vrfy.org>
Acked-by: Fengguang Wu <wfg@linux.intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Although syslog_seq and log_next_seq stuff are protected by logbuf_lock
spin log, it's not enough. Say we have two processes A and B, and let
syslog_seq = N, while log_next_seq = N + 1, and the two processes both
come to syslog_print at almost the same time. And No matter which
process get the spin lock first, it will increase syslog_seq by one,
then release spin lock; thus later, another process increase syslog_seq
by one again. In this case, syslog_seq is bigger than syslog_next_seq.
And latter, it would make:
wait_event_interruptiable(log_wait, syslog != log_next_seq)
don't wait any more even there is no new write comes. Thus it introduce
a infinite loop reading.
I can easily see this kind of issue by the following steps:
# cat /proc/kmsg # at meantime, I don't kill rsyslog
# So they are the two processes.
# xinit # I added drm.debug=6 in the kernel parameter line,
# so that it will produce lots of message and let that
# issue happen
It's 100% reproducable on my side. And my disk will be filled up by
/var/log/messages in a quite short time.
So, introduce a mutex_lock to stop syslog_seq from going wild just like
what devkmsg_read() does. It does fix this issue as expected.
v2: use mutex_lock_interruptiable() instead (comments from Kay)
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-By: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1. __copy_insn() needs "loff_t offset", not "unsigned long",
to read the file.
2. use pgoff_t for "idx" and remove the unnecessary typecast.
3. fix the typo, "&=" is not what we want
4. can't resist, rename off1 to off.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154359.GA9625@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
loff_t looks confusing when it is used for the virtual address.
Change map_info and install_breakpoint/remove_breakpoint paths
to use "unsigned long".
The patch doesn't change vma_address(), it can't return "long"
because it is used to verify the mapping. But probably this
needs some cleanups too.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154355.GA9622@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
uprobe->pending_list is only used to create the temporary list,
it has no meaning after we drop uprobes_mmap_hash(inode).
No need to initialize this node or remove it from tmp_list, and
we can use list_for_each_entry().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120615154353.GA9614@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
write_opcode() ensures that UPROBE_SWBP_INSN doesn't cross the
page boundary. This looks a bit confusing, the check does not
depend on vaddr and it is enough to do it only once right after
install_breakpoint()->arch_uprobe_analyze_insn().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154350.GA9611@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
write_opcode() is called by register_for_each_vma() and
uprobe_mmap() paths. In both cases the caller has already
verified this vaddr under mmap_sem, no need to re-check.
Note also that this check is wrong anyway, we should not
truncate loff_t returned by vma_address() if we do not trust
this mapping.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154347.GA9604@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
copy_insn() returns -ENOMEM if the first __copy_insn() fails,
it should return the correct error code.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154344.GA9601@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
1. copy_insn() doesn't need "addr", it can use uprobe->offset.
Remove this argument.
2. Change copy_insn/__copy_insn to accept "struct file*" instead
of vma.
copy_insn() is called only once and mm/vma/vaddr are random, it
shouldn't depend on them.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154342.GA9598@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Because the mind is treacherous and makes us forget we need to
write stuff down.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120615154339.GA9591@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
build_map_info() doesn't allocate the memory under i_mmap_mutex
to avoid the deadlock with page reclaim. But it can try
GFP_NOWAIT first, it should work in the likely case and thus we
almost never need the pre-alloc-and-retry path.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Link: http://lkml.kernel.org/r/20120615154336.GA9588@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently register_for_each_vma() is O(n ** 2) + O(n ** 3),
every time find_next_vma_info() "restarts" the
vma_prio_tree_foreach() loop and each iteration rechecks the
whole try_list. This also means that try_list can grow
"indefinitely" if register/unregister races with munmap/mmap
activity even if the number of mapping is bounded at any time.
With this patch register_for_each_vma() builds the list of
mm/vaddr structures only once and does install_breakpoint() for
each entry.
We do not care about the new mappings which can be created after
build_map_info() drops mapping->i_mmap_mutex, uprobe_mmap()
should do its work.
Note that we do not allocate map_info under i_mmap_mutex, this
can deadlock with page reclaim (but see the next patch). So we
use 2 lists, "curr" which we are going to return, and "prev"
which holds the already allocated memory. The main loop deques
the entry from "prev" (initially it is empty), and if "prev"
becomes empty again it counts the number of entries we need to
pre-allocate outside of i_mmap_mutex.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Link: http://lkml.kernel.org/r/20120615154333.GA9581@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
install_breakpoint() returns -EEXIST if is_swbp_insn(orig_insn)
== T, the caller treats this code as success.
This is doubly wrong. The successful return should set
UPROBE_COPY_INSN, but the real problem is that it shouldn't
succeed. If the probed insn is int3 the application should get
SIGTRAP, this won't happen with uprobe.
Probably we can fix this, we can add the UPROBE_SHARED_BP flag
and teach handle_swbp/set_orig_insn to handle this case
correctly. But this needs some complications and we have other
insns which can't be probed, lets make a simple fix for now.
I think this needs a cleanup. UPROBE_COPY_INSN should die,
copy_insn() should be called by alloc_uprobe().
arch_uprobe_analyze_insn() depends on ->mm (ia32_compat) but it
is called only once.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154331.GA9578@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
write_opcode() gets old_page via get_user_pages() and then calls
__replace_page() which assumes that this old_page is still
mapped after pte_offset_map_lock().
This is not true if this old_page was already try_to_unmap()'ed,
and in this case everything __replace_page() does with old_page
is wrong. Just for example, put_page() is not balanced.
I think it is possible to teach __replace_page() to handle this
unlikely case correctly, but this patch simply changes it to use
page_check_address() and return -EAGAIN if it fails. The caller
should notice this error code and retry.
Note: write_opcode() asks for the cleanups, I'll try to do this
in a separate patch.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154328.GA9571@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__copy_insn() blindly calls read_mapping_page(), this will crash
the kernel if ->readpage == NULL, add the necessary check. For
example, hugetlbfs_aops->readpage is NULL. Perhaps we should
change read_mapping_page() instead.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154325.GA9568@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__replace_page() obviously can't work with the hugetlbfs
mappings, uprobe_register() will likely crash the kernel. Change
valid_vma() to check VM_HUGETLB as well.
As for PageTransHuge() no need to worry, vma->vm_file != NULL.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120615154322.GA9561@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf fixes from Ingo Molnar.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
watchdog: Quiet down the boot messages
perf/x86: Fix broken LBR fixup code
tracing: Have tracing_off() actually turn tracing off
Pull core updates (RCU and locking) from Ingo Molnar:
"Most of the diffstat comes from the RCU slow boot regression fixes,
but there's also a debuggability improvements/fixes."
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
memblock: Document memblock_is_region_{memory,reserved}()
rcu: Precompute RCU_FAST_NO_HZ timer offsets
rcu: Move RCU_FAST_NO_HZ per-CPU variables to rcu_dynticks structure
rcu: Update RCU_FAST_NO_HZ tracing for lazy callbacks
rcu: RCU_FAST_NO_HZ detection of callback adoption
spinlock: Indicate that a lockup is only suspected
kdump: Execute kmsg_dump(KMSG_DUMP_PANIC) after smp_send_stop()
panic: Make panic_on_oops configurable
Provide an iterator to receive the log buffer content, and convert all
kmsg_dump() users to it.
The structured data in the kmsg buffer now contains binary data, which
should no longer be copied verbatim to the kmsg_dump() users.
The iterator should provide reliable access to the buffer data, and also
supports proper log line-aware chunking of data while iterating.
Signed-off-by: Kay Sievers <kay@vrfy.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Reported-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Tested-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Where irq_domain_associate() is called in irq_create_mapping, there is
no need to test for IRQ_DOMAIN_MAP_LEGACY because it is already tested
for earlier in the routine.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <rob.herring@calxeda.com>
While common irqdesc allocation is node aware, the irqdomain code is not.
Presently we observe a number of regressions/inconsistencies on
NUMA-capable platforms:
- Platforms using irqdomains with legacy mappings, where the
irq_descs are allocated node-local and the irqdomain data
structure is not.
- Drivers implementing irqdomains will lose node locality
regardless of the underlying struct device's node id.
This plugs in NUMA node id proliferation across the various allocation
callsites by way of_node_to_nid() node lookup. While of_node_to_nid()
does the right thing for OF-capable platforms it doesn't presently handle
the non-DT case. This is trivially dealt with by simply wraping in to
numa_node_id() unconditionally.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
The pattern (np ? np->full_name : "<none>") is rather common in the
kernel, but can also make for quite long lines. This patch adds a new
inline function, of_node_full_name() so that the test for a valid node
pointer doesn't need to be open coded at all call sites.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
All trace events including ftrace internel events (like trace_printk
and function tracing), register functions that describe how to print
their output. The events may be recorded as soon as the ring buffer
is allocated, but they are just raw binary in the buffer. The mapping
of event ids to how to print them are held within a structure that
is registered on system boot.
If a crash happens in boot up before these functions are registered
then their output (via ftrace_dump_on_oops) will be useless:
Dumping ftrace buffer:
---------------------------------
<...>-1 0.... 319705us : Unknown type 6
---------------------------------
This can be quite frustrating for a kernel developer trying to see
what is going wrong.
There's no reason to register them so late in the boot up process.
They can be registered by early_initcall().
Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
register_ftrace_function() checks ftrace_disabled and calls
__register_ftrace_function which does it again.
Drop the first check and add the unlikely hint to the second one. Also,
drop the label as John correctly notices.
No functional change.
Link: http://lkml.kernel.org/r/20120329171140.GE6409@aftab
Cc: Borislav Petkov <bp@amd64.org>
Cc: John Kacur <jkacur@redhat.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A bunch of bugzillas have complained how noisy the nmi_watchdog
is during boot-up especially with its expected failure cases
(like virt and bios resource contention).
This is my attempt to quiet them down and keep it less confusing
for the end user. What I did is print the message for cpu0 and
save it for future comparisons. If future cpus have an
identical message as cpu0, then don't print the redundant info.
However, if a future cpu has a different message, happily print
that loudly.
Before the change, you would see something like:
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog enabled, takes one hw-pmu counter.
#2
NMI watchdog enabled, takes one hw-pmu counter.
#3 Ok.
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (22607.24 BogoMIPS).
After the change, it is simplified to:
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1#2#3 Ok.
Brought up 4 CPUs
V2: little changes based on Joe Perches' feedback
V3: printk cleanup based on Ingo's feedback; checkpatch fix
V4: keep printk as one long line
V5: Ingo fix ups
Reported-and-tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: nzimmer@sgi.com
Cc: joe@perches.com
Link: http://lkml.kernel.org/r/1339594548-17227-1-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If a resource has no parent, allow its start/end to be set arbitrarily
as long as any children are still contained within the new range.
[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Dave Jones reported a kernel BUG at mm/slub.c:3474! triggered
by splice_shrink_spd() called from vmsplice_to_pipe()
commit 35f3d14dbb (pipe: add support for shrinking and growing pipes)
added capability to adjust pipe->buffers.
Problem is some paths don't hold pipe mutex and assume pipe->buffers
doesn't change for their duration.
Fix this by adding nr_pages_max field in struct splice_pipe_desc, and
use it in place of pipe->buffers where appropriate.
splice_shrink_spd() loses its struct pipe_inode_info argument.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Tom Herbert <therbert@google.com>
Cc: stable <stable@vger.kernel.org> # 2.6.35
Tested-by: Dave Jones <davej@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 7ff9554bb5, printk: convert
byte-buffer to variable-length record buffer, causes systems using
EABI to crash very early in the boot cycle. The first entry in struct
log is a u64, which for EABI must be 8 byte aligned.
Make use of __alignof__() so the compiler to decide the alignment, but
allow it to be overridden using CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS,
for systems which can perform unaligned access and want to save
a few bytes of space.
Tested on Orion5x and Kirkwood.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The next idle expiry time record and idle sleeps tracking are
statistics that only concern idle.
Since we want the nohz APIs to become usable further idle
context, let's pull up the handling of these statistics to the
callers in idle.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Since we want to prepare for making the nohz API to work further
the idle case, we need to pull ts->idle_calls incrementation up to
the callers in idle.
To perform this, we split tick_nohz_stop_sched_tick() in two parts:
a first one that checks if we can really stop the tick for idle,
and another that actually stops it. Then from the callers in idle,
we check if we can stop the tick and only then we increment idle_calls
and finally relay to the nohz API that won't care about these details
anymore.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Now that idle and nohz logics are going to be independant each others,
ts->idle_tick becomes too much a biased name to describe the field that
saves the last scheduled tick on top of which we re-calculate the next
tick to schedule when the timer is restarted.
We want to reuse this even to stop the tick outside idle cases. So let's
rename it to some more generic name: ts->last_tick.
This changes a bit the timer list stat export so we need to increase its
version.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
When the timer tick fires, it accounts the new jiffy as either part
of system, user or idle time. This is how we record the cputime
statistics.
But when the tick is stopped from the idle task, we still need
to record the number of jiffies spent tickless until we restart
the tick and fall back to traditional tick-based cputime accounting.
To do this, we take a snapshot of jiffies when the tick is stopped
and compute the difference against the new value of jiffies when
the tick is restarted. Then we account this whole difference to
the idle cputime.
However we are preparing to be able to stop the tick from other places
than idle. So this idle time accounting needs to be performed from
the callers of nohz APIs, not from the nohz APIs themselves because
we now want them to be agnostic against places that stop/restart tick.
Therefore, we pull the tickless idle time accounting out of generic
nohz helpers up to idle entry/exit callers.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
As we plan to be able to stop the tick outside the idle task, we
need to prepare for separating nohz logic from idle. As a start,
this pulls the idle sleeping time accounting out of the tick
stop/restart API to the callers on idle entry/exit.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Merge RCU fixes from Paul E. McKenney:
" This series has four patches, the major point of which is to eliminate
some slowdowns (including boot-time slowdowns) resulting from some
RCU_FAST_NO_HZ changes. The issue with the changes is that posting timers
from the idle loop has no effect if the CPU has entered dyntick-idle
mode because the CPU has already computed its wakeup time, and posting
a timer does not cause it to be recomputed. The short-term fix is for
RCU to precompute the timeout value so that the CPU's calculation is
correct. "
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix lots of new kernel-doc warnings in kernel/sched/fair.c:
Warning(kernel/sched/fair.c:3625): No description found for parameter 'env'
Warning(kernel/sched/fair.c:3625): Excess function parameter 'sd' description in 'update_sg_lb_stats'
Warning(kernel/sched/fair.c:3735): No description found for parameter 'env'
Warning(kernel/sched/fair.c:3735): Excess function parameter 'sd' description in 'update_sd_pick_busiest'
Warning(kernel/sched/fair.c:3735): Excess function parameter 'this_cpu' description in 'update_sd_pick_busiest'
.. more warnings
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull perf fixes from Ingo Molnar:
"A bit larger than what I'd wish for - half of it is due to hw driver
updates to Intel Ivy-Bridge which info got recently released,
cycles:pp should work there now too, amongst other things. (but we
are generally making exceptions for hardware enablement of this type.)
There are also callchain fixes in it - responding to mostly
theoretical (but valid) concerns. The tooling side sports perf.data
endianness/portability fixes which did not make it for the merge
window - and various other fixes as well."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
perf/x86: Check user address explicitly in copy_from_user_nmi()
perf/x86: Check if user fp is valid
perf: Limit callchains to 127
perf/x86: Allow multiple stacks
perf/x86: Update SNB PEBS constraints
perf/x86: Enable/Add IvyBridge hardware support
perf/x86: Implement cycles:p for SNB/IVB
perf/x86: Fix Intel shared extra MSR allocation
x86/decoder: Fix bsr/bsf/jmpe decoding with operand-size prefix
perf: Remove duplicate invocation on perf_event_for_each
perf uprobes: Remove unnecessary check before strlist__delete
perf symbols: Check for valid dso before creating map
perf evsel: Fix 32 bit values endianity swap for sample_id_all header
perf session: Handle endianity swap on sample_id_all header data
perf symbols: Handle different endians properly during symbol load
perf evlist: Pass third argument to ioctl explicitly
perf tools: Update ioctl documentation for PERF_IOC_FLAG_GROUP
perf tools: Make --version show kernel version instead of pull req tag
perf tools: Check if callchain is corrupted
perf callchain: Make callchain cursors TLS
...
Pull leap second timer fix from Thomas Gleixner.
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix CLOCK_MONOTONIC inconsistency during leapsecond
This reverts commit 40af1bbdca.
It's horribly and utterly broken for at least the following reasons:
- calling sync_mm_rss() from mmput() is fundamentally wrong, because
there's absolutely no reason to believe that the task that does the
mmput() always does it on its own VM. Example: fork, ptrace, /proc -
you name it.
- calling it *after* having done mmdrop() on it is doubly insane, since
the mm struct may well be gone now.
- testing mm against NULL before you call it is insane too, since a
NULL mm there would have caused oopses long before.
.. and those are just the three bugs I found before I decided to give up
looking for me and revert it asap. I should have caught it before I
even took it, but I trusted Andrew too much.
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm->rss_stat counters have per-task delta: task->rss_stat. Before
changing task->mm pointer the kernel must flush this delta with
sync_mm_rss().
do_exit() already calls sync_mm_rss() to flush the rss-counters before
committing the rss statistics into task->signal->maxrss, taskstats,
audit and other stuff. Unfortunately the kernel does this before
calling mm_release(), which can call put_user() for processing
task->clear_child_tid. So at this point we can trigger page-faults and
task->rss_stat becomes non-zero again. As a result mm->rss_stat becomes
inconsistent and check_mm() will print something like this:
| BUG: Bad rss-counter state mm:ffff88020813c380 idx:1 val:-1
| BUG: Bad rss-counter state mm:ffff88020813c380 idx:2 val:1
This patch moves sync_mm_rss() into mm_release(), and moves mm_release()
out of do_exit() and calls it earlier. After mm_release() there should
be no pagefaults.
[akpm@linux-foundation.org: tweak comment]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org> [3.4.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit b76437579d ("procfs: mark thread stack correctly in
proc/<pid>/maps") the stack allocated via clone() is marked in
/proc/<pid>/maps as [stack:%d] thus it might be out of the former
mm->start_stack/end_stack values (and even has some custom VMA flags
set).
So to be able to restore mm->start_stack/end_stack drop vma flags test,
but still require the underlying VMA to exist.
As always note this feature is under CONFIG_CHECKPOINT_RESTORE and
requires CAP_SYS_RESOURCE to be granted.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zero is written at clear_tid_address when the process exits. This
functionality is used by pthread_join().
We already have sys_set_tid_address() to change this address for the
current task but there is no way to obtain it from user space.
Without the ability to find this address and dump it we can't restore
pthread'ed apps which call pthread_join() once they have been restored.
This patch introduces the PR_GET_TID_ADDRESS prctl option which allows
the current process to obtain own clear_tid_address.
This feature is available iif CONFIG_CHECKPOINT_RESTORE is set.
[akpm@linux-foundation.org: fix prctl numbering]
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pedro Alves <palves@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A fix for commit b32dfe3771 ("c/r: prctl: add ability to set new
mm_struct::exe_file").
After removing mm->num_exe_file_vmas kernel keeps mm->exe_file until
final mmput(), it never becomes NULL while task is alive.
We can check for other mapped files in mm instead of checking
mm->num_exe_file_vmas, and mark mm with flag MMF_EXE_FILE_CHANGED in
order to forbid second changing of mm->exe_file.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a CPU is entering dyntick-idle mode, tick_nohz_stop_sched_tick()
calls rcu_needs_cpu() see if RCU needs that CPU, and, if not, computes the
next wakeup time based on the timer wheels. Only later, when actually
entering the idle loop, rcu_prepare_for_idle() will be invoked. In some
cases, rcu_prepare_for_idle() will post timers to wake the CPU back up.
But all for naught: The next wakeup time for the CPU has already been
computed, and posting a timer afterwards does not force that wakeup
time to be recomputed. This means that rcu_prepare_for_idle()'s have
no effect.
This is not a problem on a busy system because something else will wake
up the CPU soon enough. However, on lightly loaded systems, the CPU
might stay asleep for a considerable length of time. If that CPU has
a callback that the rest of the system is waiting on, the system might
run very slowly or (in theory) even hang.
This commit avoids this problem by having rcu_needs_cpu() give
tick_nohz_stop_sched_tick() an estimate of when RCU will need the CPU
to wake back up, which tick_nohz_stop_sched_tick() takes into account
when programming the CPU's wakeup time. An alternative approach is
for rcu_prepare_for_idle() to use hrtimers instead of normal timers,
but timers are much more efficient than are hrtimers for frequently
and repeatedly posting and cancelling a given timer, which is exactly
what RCU_FAST_NO_HZ does.
Reported-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
The RCU_FAST_NO_HZ code relies on a number of per-CPU variables.
This works, but is hidden from someone scanning the data structures
in rcutree.h. This commit therefore converts these per-CPU variables
to fields in the per-CPU rcu_dynticks structures.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
In the current code, a short dyntick-idle interval (where there is
at least one non-lazy callback on the CPU) and a long dyntick-idle
interval (where there are only lazy callbacks on the CPU) are traced
identically, which can be less than helpful. This commit therefore
emits different event traces in these two cases.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
In the present implementations of CPU hotplug, the outgoing CPU is
guaranteed to run its stop-machine process on the way out, which
will guarantee that RCU_FAST_NO_HZ forces the CPU out of dyntick-idle
mode.
However, new versions of CPU hotplug might not work this way. This
commit therefore removes this design constraint by explicitly notifying
CPUs when they adopt non-lazy RCU callbacks.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
A recent update to have tracing_on/off() only affect the ftrace ring
buffers instead of all ring buffers had a cut and paste error.
The tracing_off() did the exact same thing as tracing_on() and
would not actually turn off tracing. Unfortunately, tracing_off()
is more important to be working than tracing_on() as this is a key
development tool, as it lets the developer turn off tracing as soon
as a problem is discovered. It is also used by panic and oops code.
This bug also breaks the 'echo func:traceoff > set_ftrace_filter'
Cc: <stable@vger.kernel.org> # 3.4
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It was introduced for memcg to iterate cgroup hierarchy without
holding cgroup_mutex, but soon after that it was replaced with
a lockless way in memcg.
No one used hierarchy_mutex since that, so remove it.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
__css_put is using atomic_dec on the ref count, and then
looking at the ref count to make decisions. This is prone
to races, as someone else may decrement ref count between
our decrement and our decision. Instead, we should base our
decisions on the value that we decremented the ref count to.
(This results in an actual race on Google's kernel which I
haven't been able to reproduce on the upstream kernel. Having
said that, it's still incorrect by inspection).
Signed-off-by: Salman Qazi <sqazi@google.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Kill the no longer needed uprobes_srcu/uprobe_srcu_id code.
It doesn't really work anyway. synchronize_srcu() can only
synchronize with the code "inside" the
srcu_read_lock/srcu_read_unlock section, while
uprobe_pre_sstep_notifier() does srcu_read_lock() _after_ we
already hit the breakpoint.
I guess this probably works "in practice". synchronize_srcu() is
slow and it implies synchronize_sched(), and the probed task
enters the non- preemptible section at the start of exception
handler. Still this is not right at least in theory, and
task->uprobe_srcu_id blows task_struct.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120529193008.GG8057@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently handle_swbp() assumes that it can't race with
unregister, so it roughly does:
if (find_uprobe(vaddr))
process_uprobe();
else
send_sig(SIGTRAP);
This relies on the not-really-working uprobes_srcu code we are
going to remove, see the next patch.
With this patch we rely on the result of
is_swbp_at_addr(bp_vaddr) if find_uprobe() fails.
If is_swbp == 1, then we hit the normal int3, we should send
SIGTRAP.
If is_swbp == 0, we raced with uprobe_unregister(), we simply
restart this insn again.
The "difficult" case is is_swbp == -EFAULT, when we can't read
this memory. In this case I think we should restart too, and
this is more correct compared to the current code which sends
SIGTRAP.
Ignoring ENOMEM/etc from get_user_pages(), this can only happen
if another thread unmaps this memory before find_active_uprobe()
takes mmap_sem. It would be better to pretend it was unmapped
before this insn was executed, restart, and get SIGSEGV.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120529192947.GF8057@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change register_for_each_vma() to take mm->mmap_sem for writing.
This is a bit unfortunate but hopefully not too bad, this is the
slow path anyway.
This is needed to ensure that find_active_uprobe() can not race
with uprobe_register() which adds the new bp at the same
bp_vaddr, after find_uprobe() fails and before
is_swbp_at_addr_fast() checks the memory.
IOW, this is needed to ensure that if find_active_uprobe()
returns NULL but is_swbp == true, we can safely assume that it
was the "normal" int3 and we should send SIGTRAP.
There is another reason for this change. We are going to replace
uprobes_state->count with MMF_ flags set by register/unregister
and cleared by find_active_uprobe(), and set/clear shouldn't
race with each other.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120529192928.GE8057@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A separate patch to simplify the review, and for the
documentation.
The patch adds another "int *is_swbp" argument to
find_active_uprobe(), so far its only caller doesn't use this
info.
With this patch find_active_uprobe() additionally does:
- if find_vma() + ->vm_start check fails, *is_swbp = -EFAULT
- otherwise, if valid_vma() + find_uprobe() fails, it holds
the result of is_swbp_at_addr(), can be negative too. The
latter is only possible if we raced with another thread
which did munmap/etc after we hit this bp.
IOW. If find_active_uprobe(&is_swbp) returns NULL, the caller
can look at is_swbp to figure out whether the current insn is bp
or not, or detect the race with another thread if it is
negative.
Note: I think that performance-wise this change is fine. This
adds is_swbp_at_addr(), but only if we raced with
uprobe_unregister() or if we hit the "normal" int3 but this mm
has uprobes as well. And even in this case the slow
read_opcode() path is very unlikely, this insn recently
triggered do_int3(), __copy_from_user_inatomic() shouldn't fail
in the likely case.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120529192914.GD8057@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
No functional changes. Move the "find uprobe" code from
handle_swbp() to the new helper, find_active_uprobe().
Note: with or without this change, the find-active-uprobe logic
is not exactly right. We can race with another thread which
unmaps the memory with the valid uprobe before we take
mm->mmap_sem. We can't find this uprobe simply because
find_vma() fails. In this case we wrongly assume that this trap
was not caused by uprobe and send the erroneous SIGTRAP. See the
next changes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120529192857.GC8057@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
set_orig_insn()->read_opcode() should not fail if the probed
task did mprotect() after uprobe_register(), change it to use
FOLL_FORCE. Without FOLL_WRITE this doesn't have any "side"
effect but allows to read the !VM_READ memory.
There is another reason for this change, we are going to use
is_swbp_at_addr() from handle_swbp() which can race with another
thread doing mprotect().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120529192759.GB8057@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change is_swbp_at_addr() to try to avoid the costly
read_opcode() if mm == current->mm, __copy_from_user_inatomic()
should succeed in the likely case.
Currently this optimization is not important, but we are going
to add more is_swbp_at_addr(current->mm) callers.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120529192744.GA8057@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It does not get processed because sched_domain_level_max is 0 at the
time that setup_relax_domain_level() is run.
Simply accept the value as it is, as we don't know the value of
sched_domain_level_max until sched domain construction is completed.
Fix sched_relax_domain_level in cpuset. The build_sched_domain() routine calls
the set_domain_attribute() routine prior to setting the sd->level, however,
the set_domain_attribute() routine relies on the sd->level to decide whether
idle load balancing will be off/on.
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120605184436.GA15668@sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add some code to validate assumptions we're making and output
warnings if they are not.
If this trigger we want to know about it.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alex Shi <lkml.alex@gmail.com>
Link: http://lkml.kernel.org/n/tip-6uc3wk5s9udxtdl9cnku0vtt@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Often when we run into mis-shapen topologies the balance iteration
fails to update the cpu power properly and we'll end up in /0 traps.
Always initialize the cpu-power to a semi-sane value so that we can
at least boot the machine, even if the load-balancer might not
function correctly.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-3lbhyj25sr169ha7z3qht5na@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Weird topologies can lead to asymmetric domain setups. This needs
further consideration since these setups are typically non-minimal
too.
For now, make it work by adding an extra mask selecting which CPUs
are allowed to iterate up.
The topology that triggered it is the one from David Rientjes:
10 20 20 30
20 10 20 20
20 20 10 20
30 20 20 10
resulting in boxes that wouldn't even boot.
Reported-by: David Rientjes <rientjes@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-3p86l9cuaqnxz7uxsojmz5rm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Roland Dreier reported spurious, hard to trigger lockdep warnings
within the scheduler - without any real lockup.
This bit gives us the right clue:
> [89945.640512] [<ffffffff8103fa1a>] double_lock_balance+0x5a/0x90
> [89945.640568] [<ffffffff8104c546>] push_rt_task+0xc6/0x290
if you look at that code you'll find the double_lock_balance() in
question is the one in find_lock_lowest_rq() [yay for inlining].
Now find_lock_lowest_rq() has a bug.. it fails to use
double_unlock_balance() in one exit path, if this results in a retry in
push_rt_task() we'll call double_lock_balance() again, at which point
we'll run into said lockdep confusion.
Reported-by: Roland Dreier <roland@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337282386.4281.77.camel@twins
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit cb83b629b ("sched/numa: Rewrite the CONFIG_NUMA sched
domain support") removed the NODE sched domain and started checking
if the node distance in SLIT table is farther than REMOTE_DISTANCE,
if so, it will lose the load balance chance at exec/fork/wake_affine
points.
But actually, even the node distance is farther than REMOTE_DISTANCE.
Modern CPUs also has QPI like connections, which ensures that memory
access is not too slow between nodes. So the above change in behavior
on NUMA machine causes a performance regression on various benchmarks:
hackbench, tbench, netperf, oltp, etc.
This patch will recover the scheduler behavior to old mode on all my
Intel platforms: NHM EP/EX, WSM EP, SNB EP/EP4S, and thus fixes the
perfromance regressions. (all of them just have 2 kinds distance, 10, 21)
Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338965571-9812-1-git-send-email-alex.shi@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Gilad reported at
http://lkml.kernel.org/r/1336056962-10465-2-git-send-email-gilad@benyossef.com
"Current timer code fails to correctly return a value meaning that
there is no future timer event, with the result that the timer keeps
getting re-armed in HZ one shot mode even when we could turn it off,
generating unneeded interrupts.
What is happening is that when __next_timer_interrupt() wishes
to return a value that signifies "there is no future timer
event", it returns (base->timer_jiffies + NEXT_TIMER_MAX_DELTA).
However, the code in tick_nohz_stop_sched_tick(), which called
__next_timer_interrupt() via get_next_timer_interrupt(),
compares the return value to (last_jiffies + NEXT_TIMER_MAX_DELTA)
to see if the timer needs to be re-armed.
base->timer_jiffies != last_jiffies and so tick_nohz_stop_sched_tick()
interperts the return value as indication that there is a distant
future event 12 days from now and programs the timer to fire next
after KTIME_MAX nsecs instead of avoiding to arm it. This ends up
causing a needless interrupt once every KTIME_MAX nsecs."
Fix this by using the new active timer accounting. This avoids scans
when no active timer is enqueued completely, so we don't have to rely
on base->timer_next and base->timer_jiffies anymore.
Reported-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20120525214819.317535385@linutronix.de
The code in get_next_timer_interrupt() is suboptimal as it has to run
through the cascade to find the next expiring timer. On a completely
idle core we should only do that when there is an active timer
enqueued and base->next_timer does not give us a fast answer.
Add accounting of the active timers to the now consolidated
attach/detach code. I deliberately avoided sanity checks because the
code is fully symetric and any fiddling with timers w/o using the API
functions will lead to cute explosions anyway. ulong is big enough
even on 32bit and if we really run into the situation to have more
than 1<<32 timers enqueued there, then we are definitely not in a
state to go idle and run through that code.
This allows us to fix another shortcoming of get_next_timer_interrupt().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20120525214819.236377028@linutronix.de
Another bunch of mindlessly copied code. All callers of
internal_add_timer() except the recascading code updates
base->next_timer.
Move this into internal_add_timer() and let the cascading code call
__internal_add_timer().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20120525214819.189946224@linutronix.de
Most callers of detach_timer() have the same pattern around
them. Check whether the timer is pending and eventually updating
base->next_timer.
Create detach_if_pending() and replace the duplicated code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20120525214819.131246037@linutronix.de
Pull perf fixes from Arnaldo Carvalho de Melo:
* Endianness fixes from Jiri Olsa
* Fixes for make perf tarball
* Fix for DSO name in perf script callchains, from David Ahern
* Segfault fixes for perf top --callchain, from Namhyung Kim
* Minor function result fixes from Srikar Dronamraju
* Add missing 3rd ioctl parameter, from Namhyung Kim
* Fix pager usage in minimal embedded systems, from Avik Sil
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull cgroup fix from Tejun Heo:
"This fixes the possible premature superblock release on umount bug
mentioned during v3.5-rc1 pull request.
Originally, cgroup dentry destruction path assumed that cgroup dentry
didn't have any reference left after cgroup removal thus put super
during dentry removal. Now that there can be lingering dentry
references, this led to super being put with live dentries. This
patch fixes the problem by putting super ref on dentry release instead
of removal."
* 'for-3.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: superblock can't be released with active dentries
Pull scheduler fixes from Ingo Molnar.
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Remove NULL assignment of dattr_cur
sched: Remove the last NULL entry from sched_feat_names
sched: Make sched_feat_names const
sched/rt: Fix SCHED_RR across cgroups
sched: Move nr_cpus_allowed out of 'struct sched_rt_entity'
sched: Make sure to not re-read variables after validation
sched: Fix SD_OVERLAP
sched: Don't try allocating memory from offline nodes
sched/nohz: Fix rq->cpu_load calculations some more
sched/x86: Use cpu_llc_shared_mask(cpu) for coregroup_mask
Commit 6b43ae8a61 (ntp: Fix leap-second hrtimer livelock) broke the
leapsecond update of CLOCK_MONOTONIC. The missing leapsecond update to
wall_to_monotonic causes discontinuities in CLOCK_MONOTONIC.
Adjust wall_to_monotonic when NTP inserted a leapsecond.
Reported-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Richard Cochran <richardcochran@gmail.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1338400497-12420-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull irq and smpboot updates from Thomas Gleixner:
"Just cleanup patches with no functional change and a fix for suspend
issues."
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Introduce irq_do_set_affinity() to reduce duplicated code
genirq: Add IRQS_PENDING for nested and simple irq
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smpboot, idle: Fix comment mismatch over idle_threads_init()
smpboot, idle: Optimize calls to smp_processor_id() in idle_threads_init()
Pull timer updates from Thomas Gleixner:
"The clocksource driver is pure hardware enablement and the skew option
is default off, well tested and non dangerous."
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick: Move skew_tick option into the HIGH_RES_TIMER section
clocksource: em_sti: Add DT support
clocksource: em_sti: Emma Mobile STI driver
clockevents: Make clockevents_config() a global symbol
tick: Add tick skew boot option
Pull third pile of signal handling patches from Al Viro:
"This time it's mostly helpers and conversions to them; there's a lot
of stuff remaining in the tree, but that'll either go in -rc2
(isolated bug fixes, ideally via arch maintainers' trees) or will sit
there until the next cycle."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
x86: get rid of calling do_notify_resume() when returning to kernel mode
blackfin: check __get_user() return value
whack-a-mole with TIF_FREEZE
FRV: Optimise the system call exit path in entry.S [ver #2]
FRV: Shrink TIF_WORK_MASK [ver #2]
FRV: Prevent syscall exit tracing and notify_resume at end of kernel exceptions
new helper: signal_delivered()
powerpc: get rid of restore_sigmask()
most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set
set_restore_sigmask() is never called without SIGPENDING (and never should be)
TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set
don't call try_to_freeze() from do_signal()
pull clearing RESTORE_SIGMASK into block_sigmask()
sh64: failure to build sigframe != signal without handler
openrisc: tracehook_signal_handler() is supposed to be called on success
new helper: sigmask_to_save()
new helper: restore_saved_sigmask()
new helpers: {clear,test,test_and_clear}_restore_sigmask()
HAVE_RESTORE_SIGMASK is defined on all architectures now
Pull vfs changes from Al Viro.
"A lot of misc stuff. The obvious groups:
* Miklos' atomic_open series; kills the damn abuse of
->d_revalidate() by NFS, which was the major stumbling block for
all work in that area.
* ripping security_file_mmap() and dealing with deadlocks in the
area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in
general.
* ->encode_fh() switched to saner API; insane fake dentry in
mm/cleancache.c gone.
* assorted annotations in fs (endianness, __user)
* parts of Artem's ->s_dirty work (jff2 and reiserfs parts)
* ->update_time() work from Josef.
* other bits and pieces all over the place.
Normally it would've been in two or three pull requests, but
signal.git stuff had eaten a lot of time during this cycle ;-/"
Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the
'truncate_range' inode method was removed by the VM changes, the VFS
update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due
to sparse fix added twice, with other changes nearby).
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits)
nfs: don't open in ->d_revalidate
vfs: retry last component if opening stale dentry
vfs: nameidata_to_filp(): don't throw away file on error
vfs: nameidata_to_filp(): inline __dentry_open()
vfs: do_dentry_open(): don't put filp
vfs: split __dentry_open()
vfs: do_last() common post lookup
vfs: do_last(): add audit_inode before open
vfs: do_last(): only return EISDIR for O_CREAT
vfs: do_last(): check LOOKUP_DIRECTORY
vfs: do_last(): make ENOENT exit RCU safe
vfs: make follow_link check RCU safe
vfs: do_last(): use inode variable
vfs: do_last(): inline walk_component()
vfs: do_last(): make exit RCU safe
vfs: split do_lookup()
Btrfs: move over to use ->update_time
fs: introduce inode operation ->update_time
reiserfs: get rid of resierfs_sync_super
reiserfs: mark the superblock as dirty a bit later
...
Does block_sigmask() + tracehook_signal_handler(); called when
sigframe has been successfully built. All architectures converted
to it; block_sigmask() itself is gone now (merged into this one).
I'm still not too happy with the signature, but that's a separate
story (IMO we need a structure that would contain signal number +
siginfo + k_sigaction, so that get_signal_to_deliver() would fill one,
signal_delivered(), handle_signal() and probably setup...frame() -
take one).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Only 3 out of 63 do not. Renamed the current variant to __set_current_blocked(),
added set_current_blocked() that will exclude unblockable signals, switched
open-coded instances to it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Everyone either defines it in arch thread_info.h or has TIF_RESTORE_SIGMASK
and picks default set_restore_sigmask() in linux/thread_info.h. Kill the
ifdefs, slap #error in linux/thread_info.h to catch breakage when new ones
get merged.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull second pile of signal handling patches from Al Viro:
"This one is just task_work_add() series + remaining prereqs for it.
There probably will be another pull request from that tree this
cycle - at least for helpers, to get them out of the way for per-arch
fixes remaining in the tree."
Fix trivial conflict in kernel/irq/manage.c: the merge of Andrew's pile
had brought in commit 97fd75b7b8 ("kernel/irq/manage.c: use the
pr_foo() infrastructure to prefix printks") which changed one of the
pr_err() calls that this merge moves around.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
keys: kill task_struct->replacement_session_keyring
keys: kill the dummy key_replace_session_keyring()
keys: change keyctl_session_to_parent() to use task_work_add()
genirq: reimplement exit_irq_thread() hook via task_work_add()
task_work_add: generic process-context callbacks
avr32: missed _TIF_NOTIFY_RESUME on one of do_notify_resume callers
parisc: need to check NOTIFY_RESUME when exiting from syscall
move key_repace_session_keyring() into tracehook_notify_resume()
TIF_NOTIFY_RESUME is defined on all targets now
Merge misc patches from Andrew Morton:
- the "misc" tree - stuff from all over the map
- checkpatch updates
- fatfs
- kmod changes
- procfs
- cpumask
- UML
- kexec
- mqueue
- rapidio
- pidns
- some checkpoint-restore feature work. Reluctantly. Most of it
delayed a release. I'm still rather worried that we don't have a
clear roadmap to completion for this work.
* emailed from Andrew Morton <akpm@linux-foundation.org>: (78 patches)
kconfig: update compression algorithm info
c/r: prctl: add ability to set new mm_struct::exe_file
c/r: prctl: extend PR_SET_MM to set up more mm_struct entries
c/r: procfs: add arg_start/end, env_start/end and exit_code members to /proc/$pid/stat
syscalls, x86: add __NR_kcmp syscall
fs, proc: introduce /proc/<pid>/task/<tid>/children entry
sysctl: make kernel.ns_last_pid control dependent on CHECKPOINT_RESTORE
aio/vfs: cleanup of rw_copy_check_uvector() and compat_rw_copy_check_uvector()
eventfd: change int to __u64 in eventfd_signal()
fs/nls: add Apple NLS
pidns: make killed children autoreap
pidns: use task_active_pid_ns in do_notify_parent
rapidio/tsi721: add DMA engine support
rapidio: add DMA engine support for RIO data transfers
ipc/mqueue: add rbtree node caching support
tools/selftests: add mq_perf_tests
ipc/mqueue: strengthen checks on mqueue creation
ipc/mqueue: correct mq_attr_ok test
ipc/mqueue: improve performance of send/recv
selftests: add mq_open_tests
...
When we do restore we would like to have a way to setup a former
mm_struct::exe_file so that /proc/pid/exe would point to the original
executable file a process had at checkpoint time.
For this the PR_SET_MM_EXE_FILE code is introduced. This option takes a
file descriptor which will be set as a source for new /proc/$pid/exe
symlink.
Note it allows to change /proc/$pid/exe if there are no VM_EXECUTABLE
vmas present for current process, simply because this feature is a special
to C/R and mm::num_exe_file_vmas become meaningless after that.
To minimize the amount of transition the /proc/pid/exe symlink might have,
this feature is implemented in one-shot manner. Thus once changed the
symlink can't be changed again. This should help sysadmins to monitor the
symlinks over all process running in a system.
In particular one could make a snapshot of processes and ring alarm if
there unexpected changes of /proc/pid/exe's in a system.
Note -- this feature is available iif CONFIG_CHECKPOINT_RESTORE is set and
the caller must have CAP_SYS_RESOURCE capability granted, otherwise the
request to change symlink will be rejected.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During checkpoint we dump whole process memory to a file and the dump
includes process stack memory. But among stack data itself, the stack
carries additional parameters such as command line arguments, environment
data and auxiliary vector.
So when we do restore procedure and once we've restored stack data itself
we need to setup mm_struct::arg_start/end, env_start/end, so restored
process would be able to find command line arguments and environment data
it had at checkpoint time. The same applies to auxiliary vector.
For this reason additional PR_SET_MM_(ARG_START | ARG_END | ENV_START |
ENV_END | AUXV) codes are introduced.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While doing the checkpoint-restore in the user space one need to determine
whether various kernel objects (like mm_struct-s of file_struct-s) are
shared between tasks and restore this state.
The 2nd step can be solved by using appropriate CLONE_ flags and the
unshare syscall, while there's currently no ways for solving the 1st one.
One of the ways for checking whether two tasks share e.g. mm_struct is to
provide some mm_struct ID of a task to its proc file, but showing such
info considered to be not that good for security reasons.
Thus after some debates we end up in conclusion that using that named
'comparison' syscall might be the best candidate. So here is it --
__NR_kcmp.
It takes up to 5 arguments - the pids of the two tasks (which
characteristics should be compared), the comparison type and (in case of
comparison of files) two file descriptors.
Lookups for pids are done in the caller's PID namespace only.
At moment only x86 is supported and tested.
[akpm@linux-foundation.org: fix up selftests, warnings]
[akpm@linux-foundation.org: include errno.h]
[akpm@linux-foundation.org: tweak comment text]
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Valdis.Kletnieks@vt.edu
Cc: Michal Marek <mmarek@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For those who doesn't need C/R functionality there is no need to control
last pid, ie the pid for the next fork() call.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Force SIGCHLD handling to SIG_IGN so that signals are not generated and so
that the children autoreap. This increases the parallelize and in general
the speed of network namespace shutdown.
Note self reaping childrean can exist past zap_pid_ns_processess but they
will all be reaped before we allow the pid namespace init task with pid ==
1 to be reaped.
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Louis Rilling <louis.rilling@kerlabs.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using task_active_pid_ns is more robust because it works even after we
have called exit_namespaces. This change allows us to have parent
processes that are zombies. Normally a zombie parent processes is crazy
and the last thing you would want to have but in the case of not letting
the init process of a pid namespace be reaped until all of it's children
are dead and reaped a zombie parent process is exactly what we want.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Louis Rilling <louis.rilling@kerlabs.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add more comments on clear_tasks_mm_cpumask, plus adds a runtime check:
the function is only suitable for offlined CPUs, and if called
inappropriately, the kernel should scream aloud.
[akpm@linux-foundation.org: tweak comment: s/walks up/walks/, use 80 cols]
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many architectures clear tasks' mm_cpumask like this:
read_lock(&tasklist_lock);
for_each_process(p) {
if (p->mm)
cpumask_clear_cpu(cpu, mm_cpumask(p->mm));
}
read_unlock(&tasklist_lock);
Depending on the context, the code above may have several problems,
such as:
1. Working with task->mm w/o getting mm or grabing the task lock is
dangerous as ->mm might disappear (exit_mm() assigns NULL under
task_lock(), so tasklist lock is not enough).
2. Checking for process->mm is not enough because process' main
thread may exit or detach its mm via use_mm(), but other threads
may still have a valid mm.
This patch implements a small helper function that does things
correctly, i.e.:
1. We take the task's lock while whe handle its mm (we can't use
get_task_mm()/mmput() pair as mmput() might sleep);
2. To catch exited main thread case, we use find_lock_task_mm(),
which walks up all threads and returns an appropriate task
(with task lock held).
Also, Per Peter Zijlstra's idea, now we don't grab tasklist_lock in
the new helper, instead we take the rcu read lock. We can do this
because the function is called after the cpu is taken down and marked
offline, so no new tasks will get this cpu set in their mm mask.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Grant Likely