Subsystem:
- Add tracepoints
- Rework of the RTC/nvmem API to allow drivers to discard struct nvmem_config
after registration
- New range API, drivers can now expose the useful range of the RTC
- New offset API the core is now able to add an offset to the RTC time,
modifying the supported range.
- Multiple rtc_time64_to_tm fixes
- Handle time_t overflow on 32 bit platforms in the core instead of letting
drivers do crazy things.
- remove rtc_control API
New driver:
- Intersil ISL12026
Drivers:
- Drivers exposing the RTC non volatile memory have been converted to use nvmem
- Removed useless time and date validation
- Removed an indirection pattern that was a cargo cult from ancient drivers
- Removed VLA usage
- Fixed a possible race condition in probe functions
- AB8540 support is dropped from ab8500
- pcf85363 now has alarm support
-----BEGIN PGP SIGNATURE-----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=l9i8
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"This contains a few series that have been in preparation for a while
and that will help systems with RTCs that will fail in 2038, 2069 or
2100.
Subsystem:
- Add tracepoints
- Rework of the RTC/nvmem API to allow drivers to discard struct
nvmem_config after registration
- New range API, drivers can now expose the useful range of the RTC
- New offset API the core is now able to add an offset to the RTC
time, modifying the supported range.
- Multiple rtc_time64_to_tm fixes
- Handle time_t overflow on 32 bit platforms in the core instead of
letting drivers do crazy things.
- remove rtc_control API
New driver:
- Intersil ISL12026
Drivers:
- Drivers exposing the RTC non volatile memory have been converted to
use nvmem
- Removed useless time and date validation
- Removed an indirection pattern that was a cargo cult from ancient
drivers
- Removed VLA usage
- Fixed a possible race condition in probe functions
- AB8540 support is dropped from ab8500
- pcf85363 now has alarm support"
* tag 'rtc-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (128 commits)
rtc: snvs: Fix usage of snvs_rtc_enable
rtc: mt7622: fix module autoloading for OF platform drivers
rtc: isl12022: use true and false for boolean values
rtc: ab8500: Drop AB8540 support
rtc: remove a warning during scripts/kernel-doc step
rtc: 88pm860x: remove artificial limitation
rtc: 88pm80x: remove artificial limitation
rtc: st-lpc: remove artificial limitation
rtc: mrst: remove artificial limitation
rtc: mv: remove artificial limitation
rtc: hctosys: Ensure system time doesn't overflow time_t
parisc: time: stop validating rtc_time in .read_time
rtc: pcf85063: fix clearing bits in pcf85063_start_clock
rtc: at91sam9: Set name of regmap_config
rtc: s5m: Remove VLA usage
rtc: s5m: Move enum from rtc.h to rtc-s5m.c
rtc: remove VLA usage
rtc: Add useful timestamp definitions
rtc: Add one offset seconds to expand RTC range
rtc: Factor out the RTC range validation into rtc_valid_range()
...
Pull TPM updates from James Morris:
"This release contains only bug fixes. There are no new major features
added"
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
tpm: fix intermittent failure with self tests
tpm: add retry logic
tpm: self test failure should not cause suspend to fail
tpm2: add longer timeouts for creation commands.
tpm_crb: use __le64 annotated variable for response buffer address
tpm: fix buffer type in tpm_transmit_cmd
tpm: tpm-interface: fix tpm_transmit/_cmd kdoc
tpm: cmd_ready command can be issued only after granting locality
In the effort to remove all VLAs from the kernel[1], it is desirable to
build with -Wvla. However, this warning is overly pessimistic, in that
it is only happy with stack array sizes that are declared as constant
expressions, and not constant values. One case of this is the
evaluation of the max() macro which, due to its construction, ends up
converting constant expression arguments into a constant value result.
All attempts to rewrite this macro with __builtin_constant_p() failed
with older compilers (e.g. gcc 4.4)[2]. However, Martin Uecker,
constructed[3] a mind-shattering solution that works everywhere.
Cthulhu fhtagn!
This patch updates the min()/max() macros to evaluate to a constant
expression when called on constant expression arguments. This removes
several false-positive stack VLA warnings from an x86 allmodconfig build
when -Wvla is added:
$ diff -u before.txt after.txt | grep ^-
-drivers/input/touchscreen/cyttsp4_core.c:871:2: warning: ISO C90 forbids variable length array ‘ids’ [-Wvla]
-fs/btrfs/tree-checker.c:344:4: warning: ISO C90 forbids variable length array ‘namebuf’ [-Wvla]
-lib/vsprintf.c:747:2: warning: ISO C90 forbids variable length array ‘sym’ [-Wvla]
-net/ipv4/proc.c:403:2: warning: ISO C90 forbids variable length array ‘buff’ [-Wvla]
-net/ipv6/proc.c:198:2: warning: ISO C90 forbids variable length array ‘buff’ [-Wvla]
-net/ipv6/proc.c:218:2: warning: ISO C90 forbids variable length array ‘buff64’ [-Wvla]
This also updates two cases where different enums were being compared
and explicitly casts them to int (which matches the old side-effect of
the single-evaluation code): one in tpm/tpm_tis_core.h, and one in
drm/drm_color_mgmt.c.
[1] https://lkml.org/lkml/2018/3/7/621
[2] https://lkml.org/lkml/2018/3/10/170
[3] https://lkml.org/lkml/2018/3/20/845
Co-Developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Co-Developed-by: Martin Uecker <Martin.Uecker@med.uni-goettingen.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the big set of char/misc driver patches for 4.17-rc1.
There are a lot of little things in here, nothing huge, but all
important to the different hardware types involved:
- thunderbolt driver updates
- parport updates (people still care...)
- nvmem driver updates
- mei updates (as always)
- hwtracing driver updates
- hyperv driver updates
- extcon driver updates
- and a handfull of even smaller driver subsystem and individual
driver updates
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWsShSQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykNqwCfUbfvopswb1PesHCLABDBsFQChgoAniDa6pS9
kI8TN5MdLN85UU27Mkb6
=BzFR
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc driver patches for 4.17-rc1.
There are a lot of little things in here, nothing huge, but all
important to the different hardware types involved:
- thunderbolt driver updates
- parport updates (people still care...)
- nvmem driver updates
- mei updates (as always)
- hwtracing driver updates
- hyperv driver updates
- extcon driver updates
- ... and a handful of even smaller driver subsystem and individual
driver updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (149 commits)
hwtracing: Add HW tracing support menu
intel_th: Add ACPI glue layer
intel_th: Allow forcing host mode through drvdata
intel_th: Pick up irq number from resources
intel_th: Don't touch switch routing in host mode
intel_th: Use correct method of finding hub
intel_th: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate
stm class: Make dummy's master/channel ranges configurable
stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate
MAINTAINERS: Bestow upon myself the care for drivers/hwtracing
hv: add SPDX license id to Kconfig
hv: add SPDX license to trace
Drivers: hv: vmbus: do not mark HV_PCIE as perf_device
Drivers: hv: vmbus: respect what we get from hv_get_synint_state()
/dev/mem: Avoid overwriting "err" in read_mem()
eeprom: at24: use SPDX identifier instead of GPL boiler-plate
eeprom: at24: simplify the i2c functionality checking
eeprom: at24: fix a line break
eeprom: at24: tweak newlines
eeprom: at24: refactor at24_probe()
...
Pull crypto updates from Herbert Xu:
"API:
- add AEAD support to crypto engine
- allow batch registration in simd
Algorithms:
- add CFB mode
- add speck block cipher
- add sm4 block cipher
- new test case for crct10dif
- improve scheduling latency on ARM
- scatter/gather support to gcm in aesni
- convert x86 crypto algorithms to skcihper
Drivers:
- hmac(sha224/sha256) support in inside-secure
- aes gcm/ccm support in stm32
- stm32mp1 support in stm32
- ccree driver from staging tree
- gcm support over QI in caam
- add ks-sa hwrng driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (212 commits)
crypto: ccree - remove unused enums
crypto: ahash - Fix early termination in hash walk
crypto: brcm - explicitly cast cipher to hash type
crypto: talitos - don't leak pointers to authenc keys
crypto: qat - don't leak pointers to authenc keys
crypto: picoxcell - don't leak pointers to authenc keys
crypto: ixp4xx - don't leak pointers to authenc keys
crypto: chelsio - don't leak pointers to authenc keys
crypto: caam/qi - don't leak pointers to authenc keys
crypto: caam - don't leak pointers to authenc keys
crypto: lrw - Free rctx->ext with kzfree
crypto: talitos - fix IPsec cipher in length
crypto: Deduplicate le32_to_cpu_array() and cpu_to_le32_array()
crypto: doc - clarify hash callbacks state machine
crypto: api - Keep failed instances alive
crypto: api - Make crypto_alg_lookup static
crypto: api - Remove unused crypto_type lookup function
crypto: chelsio - Remove declaration of static function from header
crypto: inside-secure - hmac(sha224) support
crypto: inside-secure - hmac(sha256) support
..
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlrE0xEACgkQ8vlZVpUN
gaP0Egf+NTu/CqNiaP4zXkHprYywnOYrh+NS46H5ZxFRzVox1ctiGeRfGWWrRU8+
9SIqKhMxagHU1OU71+aNrJ5bqBcTsebY/AQ8PrS6/YxJMTKTNYD8oT4uhkfV3ZE7
76WcTlyuDv+CCISUlXYXk/3H+8nP46GGaW3O51ET4SZxboMKnmSlTiKxRmBBiiib
+zuBAhReXaLSN6u0HjlTkz8UXGj0uQurMq9jOanIjZmap2iChlA0kANl2prgLvoY
KFL2XLv3sctSTlCw+xeeQUW4YGTRMAanoZDO8G5WVTA2k4ztgcqHamaCewpx6P/o
xzPpfysIGi6WINNQoEb88brxEk0VIw==
=slEq
-----END PGP SIGNATURE-----
Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull /dev/random updates from Ted Ts'o:
"A few random (cough, cough) cleanups for the /dev/random driver"
* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
drivers/char/random.c: remove unused dont_count_entropy
random: optimize add_interrupt_randomness
random: always fill buffer in get_random_bytes_wait
random: use a tighter cap in credit_entropy_bits_safe()
This does add an IPMI BMC server-side driver, to allow a Linux
system to act as an IPMI controller. That's the biggest change,
but it is just a new driver that is fairly narrow in use.
The other largish change is removing ACPI SPMI probe support,
which should have never really been there in the beginning.
-corey
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=p993
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.17' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Mostly small changes, as usual.
This does add an IPMI BMC server-side driver, to allow a Linux system
to act as an IPMI controller. That's the biggest change, but it is
just a new driver that is fairly narrow in use.
The other largish change is removing ACPI SPMI probe support, which
should have never really been there in the beginning"
* tag 'for-linus-4.17' of git://github.com/cminyard/linux-ipmi:
ipmi/parisc: Add IPMI chassis poweroff for certain HP PA-RISC and IA-64 servers
ipmi_ssif: Fix kernel panic at msg_done_handler
ipmi:pci: Blacklist a Realtek "IPMI" device
ipmi: Remove ACPI SPMI probing from the system interface driver
ipmi: Remove ACPI SPMI probing from the SSIF (I2C) driver
ipmi: missing error code in try_smi_init()
ipmi: use ARRAY_SIZE for poweroff_functions array sizing calculation
ipmi: Consolidate cleanup code
ipmi: Remove some unnecessary initializations
ipmi: Fix some error cleanup issues
ipmi: Add or fix SPDX-License-Identifier in all files
ipmi: Re-use existing macros for built-in properties
ipmi:pci: Make the PCI defines consistent with normal Linux ones
ipmi: kcs_bmc: coding-style fixes and use new poll type
char/ipmi: add documentation for sysfs interface
ipmi: kcs_bmc: mark expected switch fall-through in kcs_bmc_handle_data
ipmi: add an Aspeed KCS IPMI BMC driver
ipmi: add a KCS IPMI BMC driver
This patch allows HP PA-RISC servers like rp3410/rp3440 and the HP C8000
workstation with an IPMI controller that predate IPMI 1.5 to use the standard
poweroff or powercycle commands.
These systems firmware don't set the chassis capability bit in the Get
Device ID, but they do implement the standard poweroff and powercycle
commands.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The blackfin architecture is getting removed, so we don't
need this driver any more.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Aaron Wu <aaron.wu@analog.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The tile architecture is being removed, so we no longer need this driver.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The m32r architecture was the only user of the old-style
rtc driver for ds1302. The architecture is getting removed
now, and we have a modern driver for the same hardware in
drivers/rtc/rtc-ds1302.c, so this one won't be missed.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Keystone Security Accelerator module has a hardware random generator
sub-module. This commit adds the driver for this sub-module.
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
[t-kristo@ti.com: dropped one unnecessary dev_err message]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
My Nuvoton 6xx in a Dell XPS-13 has been intermittently failing to work
(necessitating a reboot). The problem seems to be that the TPM gets into a
state where the partial self-test doesn't return TPM_RC_SUCCESS (meaning
all tests have run to completion), but instead returns TPM_RC_TESTING
(meaning some tests are still running in the background). There are
various theories that resending the self-test command actually causes the
tests to restart and thus triggers more TPM_RC_TESTING returns until the
timeout is exceeded.
There are several issues here: firstly being we shouldn't slow down the
boot sequence waiting for the self test to complete once the TPM
backgrounds them. It will actually make available all functions that have
passed and if it gets a failure return TPM_RC_FAILURE to every subsequent
command. So the fix is to kick off self tests once and if they return
TPM_RC_TESTING log that as a backgrounded self test and continue on. In
order to prevent other tpm users from seeing any TPM_RC_TESTING returns
(which it might if they send a command that needs a TPM subsystem which is
still under test), we loop in tpm_transmit_cmd until either a timeout or we
don't get a TPM_RC_TESTING return.
Finally, there have been observations of strange returns from a partial
test. One Nuvoton is occasionally returning TPM_RC_COMMAND_CODE, so treat
any unexpected return from a partial self test as an indication we need to
run a full self test.
[jarkko.sakkinen@linux.intel.com: cleaned up some klog messages and
dropped tpm_transmit_check() helper function from James' original
commit.]
Fixes: 2482b1bba5 ("tpm: Trigger only missing TPM 2.0 self tests")
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
TPM2 can return TPM2_RC_RETRY to any command and when it does we get
unexpected failures inside the kernel that surprise users (this is
mostly observed in the trusted key handling code). The UEFI 2.6 spec
has advice on how to handle this:
The firmware SHALL not return TPM2_RC_RETRY prior to the completion
of the call to ExitBootServices().
Implementer’s Note: the implementation of this function should check
the return value in the TPM response and, if it is TPM2_RC_RETRY,
resend the command. The implementation may abort if a sufficient
number of retries has been done.
So we follow that advice in our tpm_transmit() code using
TPM2_DURATION_SHORT as the initial wait duration and
TPM2_DURATION_LONG as the maximum wait time. This should fix all the
in-kernel use cases and also means that user space TSS implementations
don't have to have their own retry handling.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The Acer Acer Veriton X4110G has a TPM device detected as:
tpm_tis 00:0b: 1.2 TPM (device-id 0xFE, rev-id 71)
After the first S3 suspend, the following error appears during resume:
tpm tpm0: A TPM error(38) occurred continue selftest
Any following S3 suspend attempts will now fail with this error:
tpm tpm0: Error (38) sending savestate before suspend
PM: Device 00:0b failed to suspend: error 38
Error 38 is TPM_ERR_INVALID_POSTINIT which means the TPM is
not in the correct state. This indicates that the platform BIOS
is not sending the usual TPM_Startup command during S3 resume.
>From this point onwards, all TPM commands will fail.
The same issue was previously reported on Foxconn 6150BK8MC and
Sony Vaio TX3.
The platform behaviour seems broken here, but we should not break
suspend/resume because of this.
When the unexpected TPM state is encountered, set a flag to skip the
affected TPM_SaveState command on later suspends.
Cc: stable@vger.kernel.org
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Link: http://lkml.kernel.org/r/CAB4CAwfSCvj1cudi+MWaB5g2Z67d9DwY1o475YOZD64ma23UiQ@mail.gmail.com
Link: https://lkml.org/lkml/2011/3/28/192
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=591031
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
TPM2_CC_Create(0x153) and TPM2_CC_CreatePrimary (0x131) involve generation
of crypto keys which can be a computationally intensive task. The timeout
is set to 3min. Rather than increasing default timeout a new constant is
added, to not stall for too long on regular commands failures.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
use __le64 annotated variable for response buffer address as this is
read in little endian format form the register.
This suppresses sparse warning
drivers/char/tpm/tpm_crb.c:558:18: warning: cast to restricted __le64
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
1. The buffer cannot be const as it is used both for send and receive.
2. Drop useless casting to u8 *, as this is already a
type of 'buf' parameter, it has just masked the 'const' issue.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Fix tmp_ -> tpm_ typo and add reference to 'space' parameter
in kdoc for tpm_transmit and tpm_transmit_cmd functions.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The correct sequence is to first request locality and only after
that perform cmd_ready handshake, otherwise the hardware will drop
the subsequent message as from the device point of view the cmd_ready
handshake wasn't performed. Symmetrically locality has to be relinquished
only after going idle handshake has completed, this requires that
go_idle has to poll for the completion and as well locality
relinquish has to poll for completion so it is not overridden
in back to back commands flow.
Two wrapper functions are added (request_locality relinquish_locality)
to simplify the error handling.
The issue is only visible on devices that support multiple localities.
Fixes: 877c57d0d0 ("tpm_crb: request and relinquish locality 0")
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
The driver works well on i.MX31 powered boards with device description
taken from board device tree, the only change to add to the driver is
the missing OF device id, the affected list of included headers and
indentation in platform driver struct are beautified a little.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
/dev/nvram was never meant to be used alongside the RTC CMOS driver from
drivers/rtc as it already expose the NVRAM through another interface..
Anyway, the last defconfig to enable it properly was removed in 2010 so
prevent ARM users from selecting it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the Altera PCI Vendor id to pci_ids.h and remove the private
definitions from xillybus_pcie.c and altera-cvp.c.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Eli Billauer <eli.billauer@gmail.com>
Cc: Anatolij Gustschin <agust@denx.de>
Acked-by: Eli Billauer <eli.billauer@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This happens when BMC doesn't return any data and the code is trying
to print the value of data[2].
Getting following crash:
[ 484.728410] Unable to handle kernel NULL pointer dereference at virtual address 00000002
[ 484.736496] pgd = ffff0000094a2000
[ 484.739885] [00000002] *pgd=00000047fcffe003, *pud=00000047fcffd003, *pmd=0000000000000000
[ 484.748158] Internal error: Oops: 96000005 [#1] SMP
[...]
[ 485.101451] Call trace:
[...]
[ 485.188473] [<ffff000000a46e68>] msg_done_handler+0x668/0x700 [ipmi_ssif]
[ 485.195249] [<ffff000000a456b8>] ipmi_ssif_thread+0x110/0x128 [ipmi_ssif]
[ 485.202038] [<ffff0000080f1430>] kthread+0x108/0x138
[ 485.206994] [<ffff0000080838e0>] ret_from_fork+0x10/0x30
[ 485.212294] Code: aa1903e1 aa1803e0 b900227f 95fef6a5 (39400aa3)
Adding a check to validate the data len before printing data[2] to fix this issue.
Signed-off-by: Kamlakant Patel <kamlakant.patel@cavium.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Realtek has some sort of "Virtual" IPMI device on the PCI bus as a
KCS controller, but whatever it is, it's not one. Ignore it if seen.
Reported-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Daniel Drake <drake@endlessm.com>
The IPMI spec states:
The purpose of the SPMI Table is to provide a mechanism that can
be used by the OSPM (an ACPI term for “OS Operating System-directed
configuration and Power Management” essentially meaning an ACPI-aware
OS or OS loader) very early in the boot process, e.g., before the
ability to execute ACPI control methods in the OS is available.
When we are probing IPMI in Linux, ACPI control methods are available,
so we shouldn't be probing using SPMI. It could cause some confusion
during the probing process.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The IPMI spec states:
The purpose of the SPMI Table is to provide a mechanism that can
be used by the OSPM (an ACPI term for “OS Operating System-directed
configuration and Power Management” essentially meaning an ACPI-aware
OS or OS loader) very early in the boot process, e.g., before the
ability to execute ACPI control methods in the OS is available.
When we are probing IPMI in Linux, ACPI control methods are available,
so we shouldn't be probing using SPMI. It could cause some confusion
during the probing process.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Jiandi An <anjiandi@codeaurora.org>
On Armada 7K/8K we need to explicitly enable the register clock. This
clock is optional because not all the SoCs using this IP need it but at
least for Armada 7K/8K it is actually mandatory.
The binding documentation is updating accordingly.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
clk_disable_unprepare() already checks that the clock pointer is valid.
No need to test it before calling it.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Functions cavium_rng_remove and cavium_rng_remove_vf are local to the
source and do not need to be in global scope, so make them static.
Cleans up sparse warnings:
drivers/char/hw_random/cavium-rng-vf.c:80:7: warning: symbol
'cavium_rng_remove_vf' was not declared. Should it be static?
drivers/char/hw_random/cavium-rng.c:65:7: warning: symbol
'cavium_rng_remove' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If platform_device_alloc() then we should return -ENOMEM instead of
returning success.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Use the ARRAY_SIZE macro on a array poweroff_functions to determine
size of the array. Improvement suggested by Coccinelle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The cleanup code for an init failure and for a device removal were
quite similar, consolidate all that into one function.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
device_remove_group() was called on any cleanup, even if the
device attrs had not been added yet. That can occur in certain
error scenarios, so add a flag to know if it has been added.
Also make sure we remove the dev if we added it ourselves.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 4.15
Cc: Laura Abbott <labbott@redhat.com>
Tested-by: Bill Perkins <wmp@grnwood.net>
Increase timeout delay to support longer timing linked
to rng initialization. Measurement is based on timer instead
of instructions per iteration which is not powerful on all
targets.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new property that allow to disable the clock error
detection which is required when the clock source selected
is out of specification (which is not mandatory).
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Avoid issue when probing the RNG without
reset if bad status has been detected previously
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit 34ce71a96d ("ALSA: timer: remove legacy rtctimer"), the
rtc_register/rtc_control/rtc_unregister API is unused. As it is highly
unlikely to be needed again, remove it.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
add_interrupt_randomess always wakes up
code blocking on /dev/random. This wake up is done
unconditionally. Unfortunately this means all interrupts
take the wait queue spinlock, which can be rather expensive
on large systems processing lots of interrupts.
We saw 1% cpu time spinning on this on a large macro workload
running on a large system.
I believe it's a recent regression (?)
Always check if there is a waiter on the wait queue
before waking up. This check can be done without
taking a spinlock.
1.06% 10460 [kernel.vmlinux] [k] native_queued_spin_lock_slowpath
|
---native_queued_spin_lock_slowpath
|
--0.57%--_raw_spin_lock_irqsave
|
--0.56%--__wake_up_common_lock
credit_entropy_bits
add_interrupt_randomness
handle_irq_event_percpu
handle_irq_event
handle_edge_irq
handle_irq
do_IRQ
common_interrupt
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This fixes a harmless UBSAN where root could potentially end up
causing an overflow while bumping the entropy_total field (which is
ignored once the entropy pool has been initialized, and this generally
is completed during the boot sequence).
This is marginal for the stable kernel series, but it's a really
trivial patch, and it fixes UBSAN warning that might cause security
folks to get overly excited for no reason.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Chen Feng <puck.chen@hisilicon.com>
Cc: stable@vger.kernel.org
And get rid of the license text that is no longer necessary.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alistair Popple <alistair@popple.id.au>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Rocky Craig <rocky.craig@hp.com>
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. If a bit does
flip it could cause an overrun if it's in one of the size parameters,
so sanity check that we're not overrunning the provided buffer when
doing a memcpy().
Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data. Also sanity check that the expected amount of data is
large enough for the TPM header.
Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data. Also sanity check that the expected amount of data is
large enough for the TPM header.
Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data. Also sanity check that the expected amount of data is
large enough for the TPM header.
Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data. Also sanity check that the expected amount of data is
large enough for the TPM header.
Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Linus Torvalds