Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
When CONFIG_CIFS_STATS2 is enabled keep counters for slow
commands (ie server took longer than 1 second to respond)
by SMB2/SMB3 command code. This can help in diagnosing
whether performance problems are on server (instead of
client) and which commands are causing the problem.
Sample output (the new lines contain words "slow responses ...")
$ cat /proc/fs/cifs/Stats
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Total Large 10 Small 490 Allocations
Operations (MIDs): 0
0 session 0 share reconnects
Total vfs operations: 67 maximum at one time: 2
4 slow responses from localhost for command 5
1 slow responses from localhost for command 6
1 slow responses from localhost for command 14
1 slow responses from localhost for command 16
1) \\localhost\test
SMBs: 243
Bytes read: 1024000 Bytes written: 104857600
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
Creates: 40 total 0 failed
Closes: 39 total 0 failed
...
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
If responses take longer than one second from the server,
we can optionally log them to dmesg in current cifs.ko code
(CONFIG_CIFS_STATS2 must be configured and a
/proc/fs/cifs/cifsFYI flag must be set), but can be more useful
to log these via ftrace (tracepoint is smb3_slow_rsp) which
is easier and more granular (still requires CONFIG_CIFS_STATS2
to be configured in the build though).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
These are used for SMB3 encryption and compounded requests.
Update these functions and the other functions related to SMB3 encryption to
take an array of requests.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Add tracepoints for reconnecting an smb3 session
Example output (from trace-cmd) with the patch
(showing the session marked for reconnect, the stat failing, and then
the subsequent SMB3 commands after the server comes back up).
The "smb3_reconnect" event is the new one.
cifsd-25993 [000] .... 29635.368265: smb3_reconnect: server=localhost current_mid=0x1e
stat-26200 [001] .... 29638.516403: smb3_enter: cifs_revalidate_dentry_attr: xid=22
stat-26200 [001] .... 29648.723296: smb3_exit_err: cifs_revalidate_dentry_attr: xid=22 rc=-112
kworker/0:1-22830 [000] .... 29653.850947: smb3_cmd_done: sid=0x0 tid=0x0 cmd=0 mid=0
kworker/0:1-22830 [000] .... 29653.851191: smb3_cmd_err: sid=0x8ae4683c tid=0x0 cmd=1 mid=1 status=0xc0000016 rc=-5
kworker/0:1-22830 [000] .... 29653.855254: smb3_cmd_done: sid=0x8ae4683c tid=0x0 cmd=1 mid=2
kworker/0:1-22830 [000] .... 29653.855482: smb3_cmd_done: sid=0x8ae4683c tid=0x8084f30d cmd=3 mid=3
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
We really, really want to be encouraging use of secure dialects,
and SMB3.1.1 offers useful security features, and will soon
be the recommended dialect for many use cases. Simplify the code
by removing the CONFIG_CIFS_SMB311 ifdef so users don't disable
it in the build, and create compatibility and/or security issues
with modern servers - many of which have been supporting this
dialect for multiple years.
Also clarify some of the Kconfig text for cifs.ko about
SMB3.1.1 and current supported features in the module.
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
SMB1 mounting broke in commit 35e2cc1ba7
("cifs: Use correct packet length in SMB2_TRANSFORM header")
Fix it and also rename smb2_rqst_len to smb_rqst_len
to make it less unobvious that the function is also called from
CIFS/SMB1
Good job by Paulo reviewing and cleaning up Ronnie's original patch.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
With protocol version 2.0 mounts we have seen crashes with corrupt mid
entries. Either the server->pending_mid_q list becomes corrupt with a
cyclic reference in one element or a mid object fetched by the
demultiplexer thread becomes overwritten during use.
Code review identified a race between the demultiplexer thread and the
request issuing thread. The demultiplexer thread seems to be written
with the assumption that it is the sole user of the mid object until
it calls the mid callback which either wakes the issuer task or
deletes the mid.
This assumption is not true because the issuer task can be woken up
earlier by a signal. If the demultiplexer thread has proceeded as far
as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer
thread will happily end up calling cifs_delete_mid while the
demultiplexer thread still is using the mid object.
Inserting a delay in the cifs demultiplexer thread widens the race
window and makes reproduction of the race very easy:
if (server->large_buf)
buf = server->bigbuf;
+ usleep_range(500, 4000);
server->lstrp = jiffies;
To resolve this I think the proper solution involves putting a
reference count on the mid object. This patch makes sure that the
demultiplexer thread holds a reference until it has finished
processing the transaction.
Cc: stable@vger.kernel.org
Signed-off-by: Lars Persson <larper@axis.com>
Acked-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In smb3_init_transform_rq(), 'orig_len' was only counting the request
length, but forgot to count any data pages in the request.
Writing or creating files with the 'seal' mount option was broken.
In addition, do some code refactoring by exporting smb2_rqst_len() to
calculate the appropriate packet size and avoid duplicating the same
calculation all over the code.
The start of the io vector is either the rfc1002 length (4 bytes) or a
SMB2 header which is always > 4. Use this fact to check and skip the
rfc1002 length if requested.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now that we have the plumbing to pass request without an rfc1002
header all the way down to the point we write to the socket we no
longer need the smb2_send_recv() function.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Move the generation of the 4 byte length field down the stack and
generate it immediately before we start writing the data to the socket.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
It's possible that the offset is non-zero in the page to send, change the
function to pass this offset to socket.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
It's possible that the page offset is non-zero in the pages in a request,
change the function to calculate the correct data buffer length.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Separate out all the 4 byte rfc1002 headers so that they are no longer
part of the SMB2 header structures to prepare for future work to add
compounding support.
Update the smb3 transform header processing that we no longer have
a rfc1002 header at the start of this structure.
Update smb2_readv_callback to accommodate that the first iovector in the
response is no the smb2 header and no longer a rfc1002 header.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The preauth hash was not being recalculated properly on reconnect
of SMB3.11 dialect mounts (which caused access denied repeatedly
on auto-reconnect).
Fixes: 8bd68c6e47 ("CIFS: implement v3.11 preauth integrity")
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Dan Carpenter had pointed this out a while ago, but the code around
this had changed so wasn't causing any problems since that field
was not used in this error path.
Still, it is cleaner to always initialize this field, so changing
the error path to set it.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <smfrench@gmail.com>
and get rid of some more calls to get_rfc1002_length()
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
This variable is set to 4 for all protocol versions and replaces
the hardcoded constant 4 throughought the code.
This will later be updated to reflect whether a response packet
has a 4 byte length preamble or not once we start removing this
field from the SMB2+ dialects.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
SMB3.11 clients must implement pre-authentification integrity.
* new mechanism to certify requests/responses happening before Tree
Connect.
* supersedes VALIDATE_NEGOTIATE
* fixes signing for SMB3.11
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
With SMB Direct connected, use it for sending data via RDMA send.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
In both functions, use an array of 8 (arbitrary but should be big enough
for all current uses) iov and avoid having to kmalloc the array
for the common case.
If 8 is too small, then fall back to the original behaviour and use
kmalloc/kfree.
This should not change any behaviour but should save us a tiny amount of
cpu cycles.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
This function is similar to SendReceive2 except it does not expect
a 4 byte rfc1002 length header in the first io vector.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
In cifs_call_async, server may respond as soon as I/O is submitted. Because
mid entry is freed on the return path, it should not be modified after I/O
is submitted.
cifs_save_when_sent modifies the sent timestamp in mid entry, and should not
be called after I/O. Call it before I/O.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Use time_after kernel macro for time comparison
that has safety check.
Signed-off-by: Karim Eshapa <karim.eshapa@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
When processing responses, and in particular freeing mids (DeleteMidQEntry),
which is very important since it also frees the associated buffers (cifs_buf_release),
we can block a long time if (writes to) socket is slow due to low memory or networking
issues.
We can block in send (smb request) waiting for memory, and be blocked in processing
responess (which could free memory if we let it) - since they both grab the
server->srv_mutex.
In practice, in the DeleteMidQEntry case - there is no reason we need to
grab the srv_mutex so remove these around DeleteMidQEntry, and it allows
us to free memory faster.
Signed-off-by: Steve French <steve.french@primarydata.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
mempool_alloc() cannot fail if the gfp flags allow it to
sleep, and both GFP_FS allows for sleeping.
So these tests of the return value from mempool_alloc()
cannot be needed.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
A signal can interrupt a SendReceive call which result in incoming
responses to the call being ignored. This is a problem for calls such as
open which results in the successful response being ignored. This
results in an open file resource on the server.
The patch looks into responses which were cancelled after being sent and
in case of successful open closes the open fids.
For this patch, the check is only done in SendReceive2()
RH-bz: 1403319
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: Stable <stable@vger.kernel.org>
We need to process read responses differently because the data
should go directly into preallocated pages. This can be done
by specifying a mid handle callback.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
This will allow us to do protocol specific tranformations of packets
before sending to the server. For SMB3 it can be used to support
encryption.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Allocate and initialize SMB2 read request without RFC1001 length
field to directly call cifs_send_recv() rather than SendReceive2()
in a read codepath.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
In order to simplify further encryption support we need to separate
RFC1001 length and SMB2 header when sending a request. Put the length
field in iov[0] and the rest of the packet into following iovs.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Now SendReceive2 frees the first iov and returns a response buffer
in it that increases a code complexity. Simplify this by making
a caller responsible for freeing request buffer itself and returning
a response buffer in a separate iov.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cifs_call_async() queues the MID to the pending list and calls
smb_send_rqst(). If smb_send_rqst() performs a partial send, it sets
the tcpStatus to CifsNeedReconnect and returns an error code to
cifs_call_async(). In this case, cifs_call_async() removes the MID
from the list and returns to the caller.
However, cifs_call_async() releases the server mutex _before_ removing
the MID. This means that a cifs_reconnect() can race with this function
and manage to remove the MID from the list and delete the entry before
cifs_call_async() calls cifs_delete_mid(). This leads to various
crashes due to the use after free in cifs_delete_mid().
Task1 Task2
cifs_call_async():
- rc = -EAGAIN
- mutex_unlock(srv_mutex)
cifs_reconnect():
- mutex_lock(srv_mutex)
- mutex_unlock(srv_mutex)
- list_delete(mid)
- mid->callback()
cifs_writev_callback():
- mutex_lock(srv_mutex)
- delete(mid)
- mutex_unlock(srv_mutex)
- cifs_delete_mid(mid) <---- use after free
Fix this by removing the MID in cifs_call_async() before releasing the
srv_mutex. Also hold the srv_mutex in cifs_reconnect() until the MIDs
are moved out of the pending list.
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <sfrench@localhost.localdomain>
With CIFS_DEBUG_2 enabled, additional debug information is tracked inside each
mid_q_entry struct, however cifs_save_when_sent may use the mid_q_entry after it
has been freed from the appropriate callback if the transport layer has very low
latency. Holding the srv_mutex fixes this use-after-free, as cifs_save_when_sent
is called while the srv_mutex is held while the request is sent.
Signed-off-by: Christopher Oo <t-chriso@microsoft.com>
The useful macros embed message level in the name. Thus, it cleans up the code
a bit. In cases when it was plain printk() the conversion was done to info
level.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
If we negotiate SMB 2.1 and higher version of the protocol and
a server supports large write buffer size, we need to consume 1
credit per 65536 bytes. So, we need to know how many credits
we have and obtain the required number of them before constructing
a writedata structure in writepages and iovec write.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
We had a bug discovered recently where an upper layer function
(cifs_iovec_write) could pass down a smb_rqst with an invalid amount of
data in it. The length of the SMB frame would be correct, but the rqst
struct would cause smb_send_rqst to send nearly 4GB of data.
This should never be the case. Add some sanity checking to the beginning
of smb_send_rqst that ensures that the amount of data we're going to
send agrees with the length in the RFC1002 header. If it doesn't, WARN()
and return -EIO to the upper layers.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Send a smb session logoff request before removing smb session off of the list.
On a signed smb session, remvoing a session off of the list before sending
a logoff request results in server returning an error for lack of
smb signature.
Never seen an error during smb logoff, so as per MS-SMB2 3.2.5.1,
not sure how an error during logoff should be retried. So for now,
if a server returns an error to a logoff request, log the error and
remove the session off of the list.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The multiplex identifier (MID) in the SMB header is only
ever used by the client, in conjunction with PID, to match responses
from the server. As such, the endianess of the MID is not important.
However, When tracing packet sequences on the wire, protocol analyzers
such as wireshark display MID as little endian. It is much more informative
for the on-the-wire MID sequences to match debug information emitted by the
CIFS driver. Therefore, one should write and read MID in the SMB header
assuming it is always little endian.
Observed from wireshark during the protocol negotiation
and session setup:
Multiplex ID: 256
Multiplex ID: 256
Multiplex ID: 512
Multiplex ID: 512
Multiplex ID: 768
Multiplex ID: 768
After this patch on-the-wire MID values begin at 1 and increase monotonically.
Introduce get_next_mid64() for the internal consumers that use the full 64 bit
multiplex identifier.
Introduce the helpers get_mid() and compare_mid() to make the endian
translation clear.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Tim Gardner <timg@tpi.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Do not send SMB2 Logoff command when reconnecting, the way smb1
code base works.
Also, no need to wait for a credit for an echo command when one is already
in flight.
Without these changes, umount command hangs if the server is unresponsive
e.g. hibernating.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@us.ibm.com>
- Hotplug changes allowing device hot-removal operations to fail
gracefully (instead of crashing the kernel) if they cannot be
carried out completely. From Rafael J Wysocki and Toshi Kani.
- Freezer update from Colin Cross and Mandeep Singh Baines targeted
at making the freezing of tasks a bit less heavy weight operation.
- cpufreq resume fix from Srivatsa S Bhat for a regression introduced
during the 3.10 cycle causing some cpufreq sysfs attributes to
return wrong values to user space after resume.
- New freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to
provide information previously available via related_cpus from
Lan Tianyu.
- cpufreq fixes and cleanups from Viresh Kumar, Jacob Shin,
Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and
Tang Yuantian.
- Fix for an ACPICA regression causing suspend/resume issues to
appear on some systems introduced during the 3.4 development cycle
from Lv Zheng.
- ACPICA fixes and cleanups from Bob Moore, Tomasz Nowicki, Lv Zheng,
Chao Guan, and Zhang Rui.
- New cupidle driver for Xilinx Zynq processors from Michal Simek.
- cpuidle fixes and cleanups from Daniel Lezcano.
- Changes to make suspend/resume work correctly in Xen guests from
Konrad Rzeszutek Wilk.
- ACPI device power management fixes and cleanups from Fengguang Wu
and Rafael J Wysocki.
- ACPI documentation updates from Lv Zheng, Aaron Lu and Hanjun Guo.
- Fix for the IA-64 issue that was the reason for reverting commit
9f29ab1 and updates of the ACPI scan code from Rafael J Wysocki.
- Mechanism for adding CMOS RTC address space handlers from Lan Tianyu
(to allow some EC-related breakage to be fixed on some systems).
- Spec-compliant implementation of acpi_os_get_timer() from
Mika Westerberg.
- Modification of do_acpi_find_child() to execute _STA in order to
to avoid situations in which a pointer to a disabled device object
is returned instead of an enabled one with the same _ADR value.
From Jeff Wu.
- Intel BayTrail PCH (Platform Controller Hub) support for the ACPI
Intel Low-Power Subsystems (LPSS) driver and modificaions of that
driver to work around a couple of known BIOS issues from
Mika Westerberg and Heikki Krogerus.
- EC driver fix from Vasiliy Kulikov to make it use get_user() and
put_user() instead of dereferencing user space pointers blindly.
- Assorted ACPI code cleanups from Bjorn Helgaas, Nicholas Mazzuca and
Toshi Kani.
- Modification of the "runtime idle" helper routine to take the return
values of the callbacks executed by it into account and to call
rpm_suspend() if they return 0, which allows some code bloat
reduction to be done, from Rafael J Wysocki and Alan Stern.
- New trace points for PM QoS from Sahara <keun-o.park@windriver.com>.
- PM QoS documentation update from Lan Tianyu.
- Assorted core PM code cleanups and changes from Bernie Thompson,
Bjorn Helgaas, Julius Werner, and Shuah Khan.
- New devfreq driver for the Exynos5-bus device from Abhilash Kesavan.
- Minor devfreq cleanups, fixes and MAINTAINERS update from
MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and
Wei Yongjun.
- OMAP Adaptive Voltage Scaling (AVS) SmartReflex voltage control
driver updates from Andrii Tseglytskyi and Nishanth Menon.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=VBBq
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"This time the total number of ACPI commits is slightly greater than
the number of cpufreq commits, but Viresh Kumar (who works on cpufreq)
remains the most active patch submitter.
To me, the most significant change is the addition of offline/online
device operations to the driver core (with the Greg's blessing) and
the related modifications of the ACPI core hotplug code. Next are the
freezer updates from Colin Cross that should make the freezing of
tasks a bit less heavy weight.
We also have a couple of regression fixes, a number of fixes for
issues that have not been identified as regressions, two new drivers
and a bunch of cleanups all over.
Highlights:
- Hotplug changes to support graceful hot-removal failures.
It sometimes is necessary to fail device hot-removal operations
gracefully if they cannot be carried out completely. For example,
if memory from a memory module being hot-removed has been allocated
for the kernel's own use and cannot be moved elsewhere, it's
desirable to fail the hot-removal operation in a graceful way
rather than to crash the kernel, but currenty a success or a kernel
crash are the only possible outcomes of an attempted memory
hot-removal. Needless to say, that is not a very attractive
alternative and it had to be addressed.
However, in order to make it work for memory, I first had to make
it work for CPUs and for this purpose I needed to modify the ACPI
processor driver. It's been split into two parts, a resident one
handling the low-level initialization/cleanup and a modular one
playing the actual driver's role (but it binds to the CPU system
device objects rather than to the ACPI device objects representing
processors). That's been sort of like a live brain surgery on a
patient who's riding a bike.
So this is a little scary, but since we found and fixed a couple of
regressions it caused to happen during the early linux-next testing
(a month ago), nobody has complained.
As a bonus we remove some duplicated ACPI hotplug code, because the
ACPI-based CPU hotplug is now going to use the common ACPI hotplug
code.
- Lighter weight freezing of tasks.
These changes from Colin Cross and Mandeep Singh Baines are
targeted at making the freezing of tasks a bit less heavy weight
operation. They reduce the number of tasks woken up every time
during the freezing, by using the observation that the freezer
simply doesn't need to wake up some of them and wait for them all
to call refrigerator(). The time needed for the freezer to decide
to report a failure is reduced too.
Also reintroduced is the check causing a lockdep warining to
trigger when try_to_freeze() is called with locks held (which is
generally unsafe and shouldn't happen).
- cpufreq updates
First off, a commit from Srivatsa S Bhat fixes a resume regression
introduced during the 3.10 cycle causing some cpufreq sysfs
attributes to return wrong values to user space after resume. The
fix is kind of fresh, but also it's pretty obvious once Srivatsa
has identified the root cause.
Second, we have a new freqdomain_cpus sysfs attribute for the
acpi-cpufreq driver to provide information previously available via
related_cpus. From Lan Tianyu.
Finally, we fix a number of issues, mostly related to the
CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean
up some code. The majority of changes from Viresh Kumar with bits
from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia,
Arnd Bergmann, and Tang Yuantian.
- ACPICA update
A usual bunch of updates from the ACPICA upstream.
During the 3.4 cycle we introduced support for ACPI 5 extended
sleep registers, but they are only supposed to be used if the
HW-reduced mode bit is set in the FADT flags and the code attempted
to use them without checking that bit. That caused suspend/resume
regressions to happen on some systems. Fix from Lv Zheng causes
those registers to be used only if the HW-reduced mode bit is set.
Apart from this some other ACPICA bugs are fixed and code cleanups
are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and
Zhang Rui.
- cpuidle updates
New driver for Xilinx Zynq processors is added by Michal Simek.
Multidriver support simplification, addition of some missing
kerneldoc comments and Kconfig-related fixes come from Daniel
Lezcano.
- ACPI power management updates
Changes to make suspend/resume work correctly in Xen guests from
Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and
cleanups and fixes of the ACPI device power state selection
routine.
- ACPI documentation updates
Some previously missing pieces of ACPI documentation are added by
Lv Zheng and Aaron Lu (hopefully, that will help people to
uderstand how the ACPI subsystem works) and one outdated doc is
updated by Hanjun Guo.
- Assorted ACPI updates
We finally nailed down the IA-64 issue that was the reason for
reverting commit 9f29ab11dd ("ACPI / scan: do not match drivers
against objects having scan handlers"), so we can fix it and move
the ACPI scan handler check added to the ACPI video driver back to
the core.
A mechanism for adding CMOS RTC address space handlers is
introduced by Lan Tianyu to allow some EC-related breakage to be
fixed on some systems.
A spec-compliant implementation of acpi_os_get_timer() is added by
Mika Westerberg.
The evaluation of _STA is added to do_acpi_find_child() to avoid
situations in which a pointer to a disabled device object is
returned instead of an enabled one with the same _ADR value. From
Jeff Wu.
Intel BayTrail PCH (Platform Controller Hub) support is added to
the ACPI driver for Intel Low-Power Subsystems (LPSS) and that
driver is modified to work around a couple of known BIOS issues.
Changes from Mika Westerberg and Heikki Krogerus.
The EC driver is fixed by Vasiliy Kulikov to use get_user() and
put_user() instead of dereferencing user space pointers blindly.
Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi
Kani.
- Assorted power management updates
The "runtime idle" helper routine is changed to take the return
values of the callbacks executed by it into account and to call
rpm_suspend() if they return 0, which allows us to reduce the
overall code bloat a bit (by dropping some code that's not
necessary any more after that modification).
The runtime PM documentation is updated by Alan Stern (to reflect
the "runtime idle" behavior change).
New trace points for PM QoS are added by Sahara
(<keun-o.park@windriver.com>).
PM QoS documentation is updated by Lan Tianyu.
Code cleanups are made and minor issues are addressed by Bernie
Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan.
- devfreq updates
New driver for the Exynos5-bus device from Abhilash Kesavan.
Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham,
Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun.
- OMAP power management updates
Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver
updates from Andrii Tseglytskyi and Nishanth Menon."
* tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits)
cpufreq: Fix cpufreq regression after suspend/resume
ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state()
PM / Sleep: Warn about system time after resume with pm_trace
cpufreq: don't leave stale policy pointer in cdbs->cur_policy
acpi-cpufreq: Add new sysfs attribute freqdomain_cpus
cpufreq: make sure frequency transitions are serialized
ACPI: implement acpi_os_get_timer() according the spec
ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan
ACPI: Add CMOS RTC Operation Region handler support
ACPI / processor: Drop unused variable from processor_perflib.c
cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases
...
Ronnie Sahlberg