Commit Graph

271 Commits

Author SHA1 Message Date
Dhaval Giani e67bc51e57 tracing: Fix trace_dump_stack() proto when CONFIG_TRACING is not set
When CONFIG_TRACING is not enabled, the stub prototype for trace_dump_stack()
is incorrect. It has (void) when it should be (int).

Link: http://lkml.kernel.org/r/CAPhKKr_H=ukFnBL4WgDOVT5ay2xeF-Ho+CA0DWZX0E2JW-=vSQ@mail.gmail.com

Signed-off-by: Dhaval Giani <dhaval.giani@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-08-02 22:38:10 -04:00
Linus Torvalds 80cc38b163 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "The usual stuff from trivial tree"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  treewide: relase -> release
  Documentation/cgroups/memory.txt: fix stat file documentation
  sysctl/net.txt: delete reference to obsolete 2.4.x kernel
  spinlock_api_smp.h: fix preprocessor comments
  treewide: Fix typo in printk
  doc: device tree: clarify stuff in usage-model.txt.
  open firmware: "/aliasas" -> "/aliases"
  md: bcache: Fixed a typo with the word 'arithmetic'
  irq/generic-chip: fix a few kernel-doc entries
  frv: Convert use of typedef ctl_table to struct ctl_table
  sgi: xpc: Convert use of typedef ctl_table to struct ctl_table
  doc: clk: Fix incorrect wording
  Documentation/arm/IXP4xx fix a typo
  Documentation/networking/ieee802154 fix a typo
  Documentation/DocBook/media/v4l fix a typo
  Documentation/video4linux/si476x.txt fix a typo
  Documentation/virtual/kvm/api.txt fix a typo
  Documentation/early-userspace/README fix a typo
  Documentation/video4linux/soc-camera.txt fix a typo
  lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment
  ...
2013-07-04 11:40:58 -07:00
Linus Torvalds e13053f506 Merge branch 'sched-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull voluntary preemption fixes from Ingo Molnar:
 "This tree contains a speedup which is achieved through better
  might_sleep()/might_fault() preemption point annotations for uaccess
  functions, by Michael S Tsirkin:

  1. The only reason uaccess routines might sleep is if they fault.
     Make this explicit for all architectures.

  2. A voluntary preemption point in uaccess functions means compiler
     can't inline them efficiently, this breaks assumptions that they
     are very fast and small that e.g.  net code seems to make.  Remove
     this preemption point so behaviour matches with what callers
     assume.

  3. Accesses (e.g through socket ops) to kernel memory with KERNEL_DS
     like net/sunrpc does will never sleep.  Remove an unconditinal
     might_sleep() in the might_fault() inline in kernel.h (used when
     PROVE_LOCKING is not set).

  4. Accesses with pagefault_disable() return EFAULT but won't cause
     caller to sleep.  Check for that and thus avoid might_sleep() when
     PROVE_LOCKING is set.

  These changes offer a nice speedup for CONFIG_PREEMPT_VOLUNTARY=y
  kernels, here's a network bandwidth measurement between a virtual
  machine and the host:

   before:
        incoming: 7122.77   Mb/s
        outgoing: 8480.37   Mb/s

   after:
        incoming: 8619.24   Mb/s   [ +21.0% ]
        outgoing: 9455.42   Mb/s   [ +11.5% ]

  I kept these changes in a separate tree, separate from scheduler
  changes, because it's a mixed MM and scheduler topic"

* 'sched-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mm, sched: Allow uaccess in atomic with pagefault_disable()
  mm, sched: Drop voluntary schedule from might_fault()
  x86: uaccess s/might_sleep/might_fault/
  tile: uaccess s/might_sleep/might_fault/
  powerpc: uaccess s/might_sleep/might_fault/
  mn10300: uaccess s/might_sleep/might_fault/
  microblaze: uaccess s/might_sleep/might_fault/
  m32r: uaccess s/might_sleep/might_fault/
  frv: uaccess s/might_sleep/might_fault/
  arm64: uaccess s/might_sleep/might_fault/
  asm-generic: uaccess s/might_sleep/might_fault/
2013-07-02 16:19:24 -07:00
Andy Shevchenko 4cd5773a2a net: core: move mac_pton() to lib/net_utils.c
Since we have at least one user of this function outside of CONFIG_NET
scope, we have to provide this function independently. The proposed
solution is to move it under lib/net_utils.c with corresponding
configuration variable and select wherever it is needed.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-05 12:00:27 -07:00
Steven Rostedt bcf312cf76 tracing: Put trace_puts() comment above trace_puts() macro for kernel doc
Kernel-doc gives the following warning:

  DOCPROC Documentation/DocBook/kernel-api.xml
Warning(/include/linux/kernel.h:590): No description found for parameter 'ip'
Warning(/include/linux/kernel.h:590): No description found for parameter 'ip'

Due to the externs between the the comment and the trace_puts() macro.
This is fixed by moving the externs below the macro and keeping the
macro and comment directly together.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-28 12:02:11 +02:00
Michael S. Tsirkin 662bbcb274 mm, sched: Allow uaccess in atomic with pagefault_disable()
This changes might_fault() so that it does not
trigger a false positive diagnostic for e.g. the following
sequence:

	spin_lock_irqsave()
	pagefault_disable()
	copy_to_user()
	pagefault_enable()
	spin_unlock_irqrestore()

In particular vhost wants to do this, to call
socket ops from under a lock.

There are 3 cases to consider:

 - CONFIG_PROVE_LOCKING - might_fault is non-inline
   so it's easy to move the in_atomic test to fix
   up the false positive warning.

 - CONFIG_DEBUG_ATOMIC_SLEEP - might_fault
   is currently inline, but we are calling a
   non-inline __might_sleep anyway,
   so let's use the non-line version of might_fault
   that does the right thing.

 - !CONFIG_DEBUG_ATOMIC_SLEEP && !CONFIG_PROVE_LOCKING
   __might_sleep is a nop so might_fault is a nop.

Make this explicit.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1369577426-26721-11-git-send-email-mst@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-28 09:41:11 +02:00
Michael S. Tsirkin 114276ac0a mm, sched: Drop voluntary schedule from might_fault()
might_fault() is called from functions like copy_to_user()
which most callers expect to be very fast, like a couple of
instructions.

So functions like memcpy_toiovec() call them many times in a loop.

But might_fault() calls might_sleep() and with CONFIG_PREEMPT_VOLUNTARY
this results in a function call.

Let's not do this - just call __might_sleep() that produces
a diagnostic for sleep within atomic, but drop
might_preempt().

Here's a test sending traffic between the VM and the host,
host is built with CONFIG_PREEMPT_VOLUNTARY:

 before:
	incoming: 7122.77   Mb/s
	outgoing: 8480.37   Mb/s

 after:
	incoming: 8619.24   Mb/s
	outgoing: 9455.42   Mb/s

As a side effect, this fixes an issue pointed
out by Ingo: might_fault might schedule differently
depending on PROVE_LOCKING. Now there's no
preemption point in both cases, so it's consistent.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1369577426-26721-10-git-send-email-mst@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-28 09:41:11 +02:00
Randy Dunlap 7450231fb3 linux/kernel.h: fix kernel-doc warning
Fix kernel-doc warning in <linux/kernel.h>:

  Warning(include/linux/kernel.h:590): No description found for parameter 'ip'

scripts/kernel-doc cannot handle macros, functions, or function
prototypes between the function or macro that is being documented and
its definition, so move these prototypes above the function that is
being documented.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-24 16:22:51 -07:00
Linus Torvalds f8ce1faf55 We get rid of the general module prefix confusion with a binary config option,
fix a remove/insert race which Never Happens, and (my favorite) handle the
 case when we have too many modules for a single commandline.  Seriously,
 the kernel is full, please go away!
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRgbGEAAoJENkgDmzRrbjx2+QP/jXs93K/sXw3rL0vBklwCFv6
 IPZmqYZiGjrzqlB4coWkgYRwW1oOsREfAjF5MmfPdykS3fO5kXfdxN4FBdfKp+IZ
 RdsycdGDuSxWomgYsivrrxLBDxDAX1VuBOjr6mu5Uuk/pCjFa61cfJDiErsu0jKz
 2EMTc98A+E71XamJdvbtal5MUIu9yeluJWG2ux2+VbCul4MSpMc//0n2nrws/RCB
 AoC96AT/Xf4U10a8zT8RfCJ29M5Vvx/KfTIcFiZvtCQxEaHNNmj831gDNiw/3jFI
 ndRph+VLHBsMoBMxfzNRrM+evqkq8+AGEGRj3ycQy5Pa6DunPyzMafWOVGBGnmaS
 tl9hATGx1438048i5tUn8ieAYG1YL1HM83hQovpCThfUKQMiq186iDt1SYYmlq3g
 0thj3znQqZDYhboPtgWzOMUdqOG/iBIKjhGQjjHZs+MInFgxL2hmax0gBNkvEtQb
 oLyfGbF6UjS7I/Md/HohnUQ4xr9kYa3MQeqPjKbRwgHRkdXhzTEZtI+MYDJBxOnW
 QGVQ97aJ2WA7vC7sz/1VhTcZqmU5zfrSc8lF+Ea+H8dQGHHbz8HxKQacEvKcMrXl
 OJyEkRUWDA0MTjeIHzn2fff9Q6/qqA1QejRiFofGJrpxopcJS84/7yA0repxvuMG
 yaMPsLq53UW37/AXYsho
 =MPiD
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull mudule updates from Rusty Russell:
 "We get rid of the general module prefix confusion with a binary config
  option, fix a remove/insert race which Never Happens, and (my
  favorite) handle the case when we have too many modules for a single
  commandline.  Seriously, the kernel is full, please go away!"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  modpost: fix unwanted VMLINUX_SYMBOL_STR expansion
  X.509: Support parse long form of length octets in Authority Key Identifier
  module: don't unlink the module until we've removed all exposure.
  kernel: kallsyms: memory override issue, need check destination buffer length
  MODSIGN: do not send garbage to stderr when enabling modules signature
  modpost: handle huge numbers of modules.
  modpost: add -T option to read module names from file/stdin.
  modpost: minor cleanup.
  genksyms: pass symbol-prefix instead of arch
  module: fix symbol versioning with symbol prefixes
  CONFIG_SYMBOL_PREFIX: cleanup.
2013-05-05 10:58:06 -07:00
Stephen Rothwell 1a0df59444 kernel/compat.c: make do_sysinfo() static
The only use outside of kernel/timer.c was in kernel/compat.c, so move
compat_sys_sysinfo() next to sys_sysinfo() in kernel/timer.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:03 -07:00
Linus Torvalds 9e8529afc4 Tracing updates for Linux 3.10
Along with the usual minor fixes and clean ups there are a few major
 changes with this pull request.
 
 1) Multiple buffers for the ftrace facility
 
 This feature has been requested by many people over the last few years.
 I even heard that Google was about to implement it themselves. I finally
 had time and cleaned up the code such that you can now create multiple
 instances of the ftrace buffer and have different events go to different
 buffers. This way, a low frequency event will not be lost in the noise
 of a high frequency event.
 
 Note, currently only events can go to different buffers, the tracers
 (ie. function, function_graph and the latency tracers) still can only
 be written to the main buffer.
 
 2) The function tracer triggers have now been extended.
 
 The function tracer had two triggers. One to enable tracing when a
 function is hit, and one to disable tracing. Now you can record a
 stack trace on a single (or many) function(s), take a snapshot of the
 buffer (copy it to the snapshot buffer), and you can enable or disable
 an event to be traced when a function is hit.
 
 3) A perf clock has been added.
 
 A "perf" clock can be chosen to be used when tracing. This will cause
 ftrace to use the same clock as perf uses, and hopefully this will make
 it easier to interleave the perf and ftrace data for analysis.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJRfnTPAAoJEOdOSU1xswtMqYYH/1WIdrwXmxHflErnYkCIr3sU
 QtYae2K5A1HcgiqOvRJrdWMOt016iMx5CaQQyBFM1vvMiPY0sTWRmwNxDfZzz9LN
 10jRvWEzZSLtzl+a9mkFWLEpr5nR/QODOxkWFCnRWscp46sp04LSTxGDYsOnPQZB
 sam/AQ1h4xA+DqDBChm9BDEUEPorGleTlN54LBaCGgSFGvrbF+eAg2s4vHNAQAvQ
 8d5xjSE9zC7J+FqbVxvJTbKI3+EqKL6hMsJKsKfi0SI+FuxBaFMSltXck5zKyTI4
 HpNJzXCmw+v90Tju7oMkPHh6RTbESPCHoGU+wqE52fM6m7oScVeuI/kfc6USwU4=
 =W1n+
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "Along with the usual minor fixes and clean ups there are a few major
  changes with this pull request.

   1) Multiple buffers for the ftrace facility

  This feature has been requested by many people over the last few
  years.  I even heard that Google was about to implement it themselves.
  I finally had time and cleaned up the code such that you can now
  create multiple instances of the ftrace buffer and have different
  events go to different buffers.  This way, a low frequency event will
  not be lost in the noise of a high frequency event.

  Note, currently only events can go to different buffers, the tracers
  (ie function, function_graph and the latency tracers) still can only
  be written to the main buffer.

   2) The function tracer triggers have now been extended.

  The function tracer had two triggers.  One to enable tracing when a
  function is hit, and one to disable tracing.  Now you can record a
  stack trace on a single (or many) function(s), take a snapshot of the
  buffer (copy it to the snapshot buffer), and you can enable or disable
  an event to be traced when a function is hit.

   3) A perf clock has been added.

  A "perf" clock can be chosen to be used when tracing.  This will cause
  ftrace to use the same clock as perf uses, and hopefully this will
  make it easier to interleave the perf and ftrace data for analysis."

* tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (82 commits)
  tracepoints: Prevent null probe from being added
  tracing: Compare to 1 instead of zero for is_signed_type()
  tracing: Remove obsolete macro guard _TRACE_PROFILE_INIT
  ftrace: Get rid of ftrace_profile_bits
  tracing: Check return value of tracing_init_dentry()
  tracing: Get rid of unneeded key calculation in ftrace_hash_move()
  tracing: Reset ftrace_graph_filter_enabled if count is zero
  tracing: Fix off-by-one on allocating stat->pages
  kernel: tracing: Use strlcpy instead of strncpy
  tracing: Update debugfs README file
  tracing: Fix ftrace_dump()
  tracing: Rename trace_event_mutex to trace_event_sem
  tracing: Fix comment about prefix in arch_syscall_match_sym_name()
  tracing: Convert trace_destroy_fields() to static
  tracing: Move find_event_field() into trace_events.c
  tracing: Use TRACE_MAX_PRINT instead of constant
  tracing: Use pr_warn_once instead of open coded implementation
  ring-buffer: Add ring buffer startup selftest
  tracing: Bring Documentation/trace/ftrace.txt up to date
  tracing: Add "perf" trace_clock
  ...

Conflicts:
	kernel/trace/ftrace.c
	kernel/trace/trace.c
2013-04-29 13:55:38 -07:00
Frederic Weisbecker dc72c32e1f printk: Provide a wake_up_klogd() off-case
wake_up_klogd() is useless when CONFIG_PRINTK=n because neither printk()
nor printk_sched() are in use and there are actually no waiter on
log_wait waitqueue.  It should be a stub in this case for users like
bust_spinlocks().

Otherwise this results in this warning when CONFIG_PRINTK=n and
CONFIG_IRQ_WORK=n:

	kernel/built-in.o In function `wake_up_klogd':
	(.text.wake_up_klogd+0xb4): undefined reference to `irq_work_queue'

To fix this, provide an off-case for wake_up_klogd() when
CONFIG_PRINTK=n.

There is much more from console_unlock() and other console related code
in printk.c that should be moved under CONFIG_PRINTK.  But for now,
focus on a minimal fix as we passed the merged window already.

[akpm@linux-foundation.org: include printk.h in bust_spinlocks.c]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reported-by: James Hogan <james.hogan@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-22 16:41:20 -07:00
Rusty Russell b92021b09d CONFIG_SYMBOL_PREFIX: cleanup.
We have CONFIG_SYMBOL_PREFIX, which three archs define to the string
"_".  But Al Viro broke this in "consolidate cond_syscall and
SYSCALL_ALIAS declarations" (in linux-next), and he's not the first to
do so.

Using CONFIG_SYMBOL_PREFIX is awkward, since we usually just want to
prefix it so something.  So various places define helpers which are
defined to nothing if CONFIG_SYMBOL_PREFIX isn't set:

1) include/asm-generic/unistd.h defines __SYMBOL_PREFIX.
2) include/asm-generic/vmlinux.lds.h defines VMLINUX_SYMBOL(sym)
3) include/linux/export.h defines MODULE_SYMBOL_PREFIX.
4) include/linux/kernel.h defines SYMBOL_PREFIX (which differs from #7)
5) kernel/modsign_certificate.S defines ASM_SYMBOL(sym)
6) scripts/modpost.c defines MODULE_SYMBOL_PREFIX
7) scripts/Makefile.lib defines SYMBOL_PREFIX on the commandline if
   CONFIG_SYMBOL_PREFIX is set, so that we have a non-string version
   for pasting.

(arch/h8300/include/asm/linkage.h defines SYMBOL_NAME(), too).

Let's solve this properly:
1) No more generic prefix, just CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX.
2) Make linux/export.h usable from asm.
3) Define VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR().
4) Make everyone use them.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Tested-by: James Hogan <james.hogan@imgtec.com> (metag)
2013-03-15 15:09:43 +10:30
Steven Rostedt (Red Hat) c142be8ebe tracing: Add skip argument to trace_dump_stack()
Altough the trace_dump_stack() already skips three functions in
the call to stack trace, which gets the stack trace to start
at the caller of the function, the caller may want to skip some
more too (as it may have helper functions).

Add a skip argument to the trace_dump_stack() that lets the caller
skip back tracing functions that it doesn't care about.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:36:05 -04:00
Steven Rostedt (Red Hat) 9d3c752c06 tracing: Optimize trace_printk() with one arg to use trace_puts()
Although trace_printk() is extremely fast, especially when it uses
trace_bprintk() (writes args straight to buffer instead of inserting
into string), it still has the overhead of calling one of the printf
sprintf() functions, that need to scan the fmt string to determine
what, if any args it has.

This is a waste of precious CPU cycles if the printk format has no
args but a single constant string. It is better to use trace_puts()
which does not have the overhead of the fmt scanning.

But wouldn't it be nice if the developer didn't have to think about
such things, and the compile would just do it for them?

  trace_printk("this string has no args\n");
  [...]
  trace_printk("this sting does %p %d\n", foo, bar);

As tracing is critical to have the least amount of overhead,
especially when dealing with race conditions, and you want to
eliminate any "Heisenbugs", you want the trace_printk() to use the
fastest possible means of tracing.

Currently the macro magic determines if it will use trace_bprintk()
or if the fmt is a dynamic string (a variable), it will fall
back to the slow trace_printk() method that does a full snprintf()
before copying it into the buffer, where as trace_bprintk() only
copys the pointer to the fmt and the args into the buffer.

Well, now there's a way to spend some more Hogwarts cash and come
up with new fancy macro magic.

  #define trace_printk(fmt, ...)			\
  do {							\
	char _______STR[] = __stringify((__VA_ARGS__));	\
	if (sizeof(_______STR) > 3)			\
		do_trace_printk(fmt, ##__VA_ARGS__);	\
	else						\
		trace_puts(fmt);			\
  } while (0)

The above needs a bit of explaining (both here and in the comments).

By stringifying the __VA_ARGS__, we can, at compile time, determine
the number of args that are being passed to trace_printk(). The extra
parenthesis are required, otherwise the compiler complains about
too many parameters for __stringify if there is more than one arg.

When there are no args, the __stringify((__VA_ARGS__)) converts into
"()\0", a string of 3 characters. Anything else, will be a string
containing more than 3 characters. Now we assign that string to a
dynamic char array, and then take the sizeof() of that array.
If it is greater than 3 characters, we know trace_printk() has args
and we need to do the full "do_trace_printk()" on them, otherwise
it was only passed a single arg and we can optimize to use trace_puts().

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven "The King of Nasty Macros!" Rostedt <rostedt@goodmis.org>
2013-03-15 00:35:56 -04:00
Steven Rostedt (Red Hat) 09ae72348e tracing: Add trace_puts() for even faster trace_printk() tracing
The trace_printk() is extremely fast and is very handy as it can be
used in any context (including NMIs!). But it still requires scanning
the fmt string for parsing the args. Even the trace_bprintk() requires
a scan to know what args will be saved, although it doesn't copy the
format string itself.

Several times trace_printk() has no args, and wastes cpu cycles scanning
the fmt string.

Adding trace_puts() allows the developer to use an even faster
tracing method that only saves the pointer to the string in the
ring buffer without doing any format parsing at all. This will
help remove even more of the "Heisenbug" effect, when debugging.

Also fixed up the F_printk()s for the ftrace internal bprint and print events.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:35:55 -04:00
Steven Rostedt (Red Hat) ad909e21bb tracing: Add internal tracing_snapshot() functions
The new snapshot feature is quite handy. It's a way for the user
to take advantage of the spare buffer that, until then, only
the latency tracers used to "snapshot" the buffer when it hit
a max latency. Now users can trigger a "snapshot" manually when
some condition is hit in a program. But a snapshot currently can
not be triggered by a condition inside the kernel.

With the addition of tracing_snapshot() and tracing_snapshot_alloc(),
snapshots can now be taking when a condition is hit, and the
developer wants to snapshot the case without stopping the trace.

Note, any snapshot will overwrite the old one, so take care
in how this is done.

These new functions are to be used like tracing_on(), tracing_off()
and trace_printk() are. That is, they should never be called
in the mainline Linux kernel. They are solely for the purpose
of debugging.

The tracing_snapshot() will not allocate a buffer, but it is
safe to be called from any context (except NMIs). But if a
snapshot buffer isn't allocated when it is called, it will write
to the live buffer, complaining about the lack of a snapshot
buffer, and then stop tracing (giving you the "permanent snapshot").

tracing_snapshot_alloc() will allocate the snapshot buffer if
it was not already allocated and then take the snapshot. This routine
*may sleep*, and must be called from context that can sleep.
The allocation is done with GFP_KERNEL and not atomic.

If you need a snapshot in an atomic context, say in early boot,
then it is best to call the tracing_snapshot_alloc() before then,
where it will allocate the buffer, and then you can use the
tracing_snapshot() anywhere you want and still get snapshots.

Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:35:51 -04:00
Rusty Russell 373d4d0997 taint: add explicit flag to show whether lock dep is still OK.
Fix up all callers as they were before, with make one change: an
unsigned module taints the kernel, but doesn't turn off lockdep.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-01-21 17:17:57 +10:30
Guenter Roeck c4e18497d8 linux/kernel.h: fix DIV_ROUND_CLOSEST with unsigned divisors
Commit 263a523d18 ("linux/kernel.h: Fix warning seen with W=1 due to
change in DIV_ROUND_CLOSEST") fixes a warning seen with W=1 due to
change in DIV_ROUND_CLOSEST.

Unfortunately, the C compiler converts divide operations with unsigned
divisors to unsigned, even if the dividend is signed and negative (for
example, -10 / 5U = 858993457).  The C standard says "If one operand has
unsigned int type, the other operand is converted to unsigned int", so
the compiler is not to blame.  As a result, DIV_ROUND_CLOSEST(0, 2U) and
similar operations now return bad values, since the automatic conversion
of expressions such as "0 - 2U/2" to unsigned was not taken into
account.

Fix by checking for the divisor variable type when deciding which
operation to perform.  This fixes DIV_ROUND_CLOSEST(0, 2U), but still
returns bad values for negative dividends divided by unsigned divisors.
Mark the latter case as unsupported.

One observed effect of this problem is that the s2c_hwmon driver reports
a value of 4198403 instead of 0 if the ADC reads 0.

Other impact is unpredictable.  Problem is seen if the divisor is an
unsigned variable or constant and the dividend is less than (divisor/2).

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Juergen Beisert <jbe@pengutronix.de>
Tested-by: Juergen Beisert <jbe@pengutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: <stable@vger.kernel.org>	[3.7.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-20 17:40:20 -08:00
Eldad Zack 4c925d6031 kstrto*: add documentation
As Bruce Fields pointed out, kstrto* is currently lacking kerneldoc
comments.  This patch adds kerneldoc comments to common variants of
kstrto*: kstrto(u)l, kstrto(u)ll and kstrto(u)int.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Joe Perches <joe@perches.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:22 -08:00
Linus Torvalds 090f8ccba3 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "Lots of activity:

   211 files changed, 8328 insertions(+), 4116 deletions(-)

  most of it on the tooling side.

  Main changes:

   * ftrace enhancements and fixes from Steve Rostedt.

   * uprobes fixes, cleanups and preparation for the ARM port from Oleg
     Nesterov.

   * UAPI fixes, from David Howels - prepares the arch/x86 UAPI
     transition

   * Separate perf tests into multiple objects, one per test, from Jiri
     Olsa.

   * Make hardware event translations available in sysfs, from Jiri
     Olsa.

   * Fixes to /proc/pid/maps parsing, preparatory to supporting data
     maps, from Namhyung Kim

   * Implement ui_progress for GTK, from Namhyung Kim

   * Add framework for automated perf_event_attr tests, where tools with
     different command line options will be run from a 'perf test', via
     python glue, and the perf syscall will be intercepted to verify
     that the perf_event_attr fields set by the tool are those expected,
     from Jiri Olsa

   * Add a 'link' method for hists, so that we can have the leader with
     buckets for all the entries in all the hists.  This new method is
     now used in the default 'diff' output, making the sum of the
     'baseline' column be 100%, eliminating blind spots.

   * libtraceevent fixes for compiler warnings trying to make perf it
     build on some distros, like fedora 14, 32-bit, some of the warnings
     really pointed to real bugs.

   * Add a browser for 'perf script' and make it available from the
     report and annotate browsers.  It does filtering to find the
     scripts that handle events found in the perf.data file used.  From
     Feng Tang

   * perf inject changes to allow showing where a task sleeps, from
     Andrew Vagin.

   * Makefile improvements from Namhyung Kim.

   * Add --pre and --post command hooks in 'stat', from Peter Zijlstra.

   * Don't stop synthesizing threads when one vanishes, this is for the
     existing threads when we start a tool like trace.

   * Use sched:sched_stat_runtime to provide a thread summary, this
     produces the same output as the 'trace summary' subcommand of
     tglx's original "trace" tool.

   * Support interrupted syscalls in 'trace'

   * Add an event duration column and filter in 'trace'.

   * There are references to the man pages in some tools, so try to
     build Documentation when installing, warning the user if that is
     not possible, from Borislav Petkov.

   * Give user better message if precise is not supported, from David
     Ahern.

   * Try to find cross-built objdump path by using the session
     environment information in the perf.data file header, from Irina
     Tirdea, original patch and idea by Namhyung Kim.

   * Diplays more output on features check for make V=1, so that one can
     figure out what is happening by looking at gcc output, etc.  From
     Jiri Olsa.

   * Add on_exit implementation for systems without one, e.g.  Android,
     from Bernhard Rosenkraenzer.

   * Only process events for vcpus of interest, helps handling large
     number of events, from David Ahern.

   * Cross compilation fixes for Android, from Irina Tirdea.

   * Add documentation on compiling for Android, from Irina Tirdea.

   * perf diff improvements from Jiri Olsa.

   * Target (task/user/cpu/syswide) handling improvements, from Namhyung
     Kim.

   * Add support in 'trace' for tracing workload given by command line,
     from Namhyung Kim.

   * ... and much more."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (194 commits)
  uprobes: Use percpu_rw_semaphore to fix register/unregister vs dup_mmap() race
  perf evsel: Introduce is_group_member method
  perf powerpc: Use uapi/unistd.h to fix build error
  tools: Pass the target in descend
  tools: Honour the O= flag when tool build called from a higher Makefile
  tools: Define a Makefile function to do subdir processing
  perf ui: Always compile browser setup code
  perf ui: Add ui_progress__finish()
  perf ui gtk: Implement ui_progress functions
  perf ui: Introduce generic ui_progress helper
  perf ui tui: Move progress.c under ui/tui directory
  perf tools: Add basic event modifier sanity check
  perf tools: Omit group members from perf_evlist__disable/enable
  perf tools: Ensure single disable call per event in record comand
  perf tools: Fix 'disabled' attribute config for record command
  perf tools: Fix attributes for '{}' defined event groups
  perf tools: Use sscanf for parsing /proc/pid/maps
  perf tools: Add gtk.<command> config option for launching GTK browser
  perf tools: Fix compile error on NO_NEWT=1 build
  perf hists: Initialize all of he->stat with zeroes
  ...
2012-12-11 18:14:31 -08:00
Kirill A. Shutemov d84da3f9e4 mm: use IS_ENABLED(CONFIG_COMPACTION) instead of COMPACTION_BUILD
We don't need custom COMPACTION_BUILD anymore, since we have handy
IS_ENABLED().

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:22 -08:00
Kirill A. Shutemov e5adfffc85 mm: use IS_ENABLED(CONFIG_NUMA) instead of NUMA_BUILD
We don't need custom NUMA_BUILD anymore, since we have handy
IS_ENABLED().

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:22 -08:00
Ingo Molnar f0b9abfb04 Merge branch 'linus' into perf/core
Conflicts:
	tools/perf/Makefile
	tools/perf/builtin-test.c
	tools/perf/perf.h
	tools/perf/tests/parse-events.c
	tools/perf/util/evsel.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-12-08 15:25:06 +01:00
James Hogan cbdbf2abb7 linux/kernel.h: define SYMBOL_PREFIX
Define SYMBOL_PREFIX to be the same as CONFIG_SYMBOL_PREFIX if set by
the architecture, or "" otherwise. This avoids the need for ugly #ifdefs
whenever symbols are referenced in asm blocks.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-12-03 13:05:54 +10:30
Michal Hocko 60efc15ae9 linux/kernel.h: Remove duplicate trace_printk declaration
!CONFIG_TRACING both declares and defines (empty) trace_printk.
The first one is not redundant so it can be removed.

Link: http://lkml.kernel.org/r/1351172511-18125-1-git-send-email-mhocko@suse.cz

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-10-31 16:46:37 -04:00
David Howells 607ca46e97 UAPI: (Scripted) Disintegrate include/linux
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-13 10:46:48 +01:00
Guenter Roeck 263a523d18 linux/kernel.h: Fix warning seen with W=1 due to change in DIV_ROUND_CLOSEST
After commit b6d86d3d (Fix DIV_ROUND_CLOSEST to support negative dividends),
the following warning is seen if the kernel is compiled with W=1 (-Wextra):

warning: comparison of unsigned expression >= 0 is always true

The warning is due to the test '((typeof(x))-1) >= 0', which is used to detect
if the variable type is unsigned. Research on the web suggests that the warning
disappears if '>' instead of '>=' is used for the comparison.

Tests after changing the macro along that line show that the warning is gone,
and that the result is still correct:

i=-4: DIV_ROUND_CLOSEST(i, 2)=-2
i=-3: DIV_ROUND_CLOSEST(i, 2)=-2
i=-2: DIV_ROUND_CLOSEST(i, 2)=-1
i=-1: DIV_ROUND_CLOSEST(i, 2)=-1
i=0: DIV_ROUND_CLOSEST(i, 2)=0
i=1: DIV_ROUND_CLOSEST(i, 2)=1
i=2: DIV_ROUND_CLOSEST(i, 2)=1
i=3: DIV_ROUND_CLOSEST(i, 2)=2
i=4: DIV_ROUND_CLOSEST(i, 2)=2

Code size is the same as before.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-09-19 06:51:25 -07:00
Guenter Roeck b6d86d3d6d linux/kernel.h: Fix DIV_ROUND_CLOSEST to support negative dividends
DIV_ROUND_CLOSEST returns a bad result for negative dividends:
	DIV_ROUND_CLOSEST(-2, 2) = 0

Most of the time this does not matter. However, in the hardware monitoring
subsystem, DIV_ROUND_CLOSEST is sometimes used on integers which can be
negative (such as temperatures).

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-09-01 18:58:09 -07:00
Rafael J. Wysocki bff9d18656 Remove SYSTEM_SUSPEND_DISK system state
The SYSTEM_SUSPEND_DISK system state is never used, so drop it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-21 13:58:17 -07:00
Xi Wang a3860c1c5d introduce SIZE_MAX
ULONG_MAX is often used to check for integer overflow when calculating
allocation size.  While ULONG_MAX happens to work on most systems, there
is no guarantee that `size_t' must be the same size as `long'.

This patch introduces SIZE_MAX, the maximum value of `size_t', to improve
portability and readability for allocation size validation.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Acked-by: Alex Elder <elder@dreamhost.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:26 -07:00
Linus Torvalds ce004178be Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Pull sparc changes from David S. Miller:
 "This has the generic strncpy_from_user() implementation architectures
  can now use, which we've been developing on linux-arch over the past
  few days.

  For good measure I ran both a 32-bit and a 64-bit glibc testsuite run,
  and the latter of which pointed out an adjustment I needed to make to
  sparc's user_addr_max() definition.  Linus, you were right, STACK_TOP
  was not the right thing to use, even on sparc itself :-)

  From Sam Ravnborg, we have a conversion of sparc32 over to the common
  alloc_thread_info_node(), since the aspect which originally blocked
  our doing so (sun4c) has been removed."

Fix up trivial arch/sparc/Kconfig and lib/Makefile conflicts.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Fix user_addr_max() definition.
  lib: Sparc's strncpy_from_user is generic enough, move under lib/
  kernel: Move REPEAT_BYTE definition into linux/kernel.h
  sparc: Increase portability of strncpy_from_user() implementation.
  sparc: Optimize strncpy_from_user() zero byte search.
  sparc: Add full proper error handling to strncpy_from_user().
  sparc32: use the common implementation of alloc_thread_info_node()
2012-05-24 15:10:28 -07:00
David S. Miller 446969084d kernel: Move REPEAT_BYTE definition into linux/kernel.h
And make sure that everything using it explicitly includes
that header file.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-24 13:10:05 -07:00
Steven Rostedt 07d777fe8c tracing: Add percpu buffers for trace_printk()
Currently, trace_printk() uses a single buffer to write into
to calculate the size and format needed to save the trace. To
do this safely in an SMP environment, a spin_lock() is taken
to only allow one writer at a time to the buffer. But this could
also affect what is being traced, and add synchronization that
would not be there otherwise.

Ideally, using percpu buffers would be useful, but since trace_printk()
is only used in development, having per cpu buffers for something
never used is a waste of space. Thus, the use of the trace_bprintk()
format section is changed to be used for static fmts as well as dynamic ones.
Then at boot up, we can check if the section that holds the trace_printk
formats is non-empty, and if it does contain something, then we
know a trace_printk() has been added to the kernel. At this time
the trace_printk per cpu buffers are allocated. A check is also
done at module load time in case a module is added that contains a
trace_printk().

Once the buffers are allocated, they are never freed. If you use
a trace_printk() then you should know what you are doing.

A buffer is made for each type of context:

  normal
  softirq
  irq
  nmi

The context is checked and the appropriate buffer is used.
This allows for totally lockless usage of trace_printk(),
and they no longer even disable interrupts.

Requested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-04-23 21:15:55 -04:00
Linus Torvalds f187e9fd68 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates and fixes from Ingo Molnar:
 "It's mostly fixes, but there's also two late items:

   - preliminary GTK GUI support for perf report
   - PMU raw event format descriptors in sysfs, to be parsed by tooling

  The raw event format in sysfs is a new ABI.  For example for the 'CPU'
  PMU we have:

    aldebaran:~> ll /sys/bus/event_source/devices/cpu/format/*
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/any
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/cmask
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/edge
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/event
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/inv
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/offcore_rsp
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/pc
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/umask

  those lists of fields contain a specific format:

    aldebaran:~> cat /sys/bus/event_source/devices/cpu/format/offcore_rsp
    config1:0-63

  So, those who wish to specify raw events can now use the following
  event format:

    -e cpu/cmask=1,event=2,umask=3

  Most people will not want to specify any events (let alone raw
  events), they'll just use whatever default event the tools use.

  But for more obscure PMU events that have no cross-architecture
  generic events the above syntax is more usable and a bit more
  structured than specifying hex numbers."

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  perf tools: Remove auto-generated bison/flex files
  perf annotate: Fix off by one symbol hist size allocation and hit accounting
  perf tools: Add missing ref-cycles event back to event parser
  perf annotate: addr2line wants addresses in same format as objdump
  perf probe: Finder fails to resolve function name to address
  tracing: Fix ent_size in trace output
  perf symbols: Handle NULL dso in dso__name_len
  perf symbols: Do not include libgen.h
  perf tools: Fix bug in raw sample parsing
  perf tools: Fix display of first level of callchains
  perf tools: Switch module.h into export.h
  perf: Move mmap page data_head offset assertion out of header
  perf: Fix mmap_page capabilities and docs
  perf diff: Fix to work with new hists design
  perf tools: Fix modifier to be applied on correct events
  perf tools: Fix various casting issues for 32 bits
  perf tools: Simplify event_read_id exit path
  tracing: Fix ftrace stack trace entries
  tracing: Move the tracing_on/off() declarations into CONFIG_TRACING
  perf report: Add a simple GTK2-based 'perf report' browser
  ...
2012-03-31 13:34:04 -07:00
Linus Torvalds a591afc01d Merge branch 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x32 support for x86-64 from Ingo Molnar:
 "This tree introduces the X32 binary format and execution mode for x86:
  32-bit data space binaries using 64-bit instructions and 64-bit kernel
  syscalls.

  This allows applications whose working set fits into a 32 bits address
  space to make use of 64-bit instructions while using a 32-bit address
  space with shorter pointers, more compressed data structures, etc."

Fix up trivial context conflicts in arch/x86/{Kconfig,vdso/vma.c}

* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
  x32: Fix alignment fail in struct compat_siginfo
  x32: Fix stupid ia32/x32 inversion in the siginfo format
  x32: Add ptrace for x32
  x32: Switch to a 64-bit clock_t
  x32: Provide separate is_ia32_task() and is_x32_task() predicates
  x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls
  x86/x32: Fix the binutils auto-detect
  x32: Warn and disable rather than error if binutils too old
  x32: Only clear TIF_X32 flag once
  x32: Make sure TS_COMPAT is cleared for x32 tasks
  fs: Remove missed ->fds_bits from cessation use of fd_set structs internally
  fs: Fix close_on_exec pointer in alloc_fdtable
  x32: Drop non-__vdso weak symbols from the x32 VDSO
  x32: Fix coding style violations in the x32 VDSO code
  x32: Add x32 VDSO support
  x32: Allow x32 to be configured
  x32: If configured, add x32 system calls to system call tables
  x32: Handle process creation
  x32: Signal-related system calls
  x86: Add #ifdef CONFIG_COMPAT to <asm/sys_ia32.h>
  ...
2012-03-29 18:12:23 -07:00
Ingo Molnar 7fd52392c5 Merge branch 'linus' into perf/urgent
Merge reason: we need to fix a non-trivial merge conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-26 17:19:03 +02:00
Linus Torvalds ed2d265d12 The following text was taken from the original review request:
"[RFC - PATCH 0/7] consolidation of BUG support code."
 		https://lkml.org/lkml/2012/1/26/525
 --
 
 The changes shown here are to unify linux's BUG support under
 the one <linux/bug.h> file.  Due to historical reasons, we have
 some BUG code in bug.h and some in kernel.h -- i.e. the support for
 BUILD_BUG in linux/kernel.h predates the addition of linux/bug.h,
 but old code in kernel.h wasn't moved to bug.h at that time.  As
 a band-aid, kernel.h was including <asm/bug.h> to pseudo link them.
 
 This has caused confusion[1] and general yuck/WTF[2] reactions.
 Here is an example that violates the principle of least surprise:
 
       CC      lib/string.o
       lib/string.c: In function 'strlcat':
       lib/string.c:225:2: error: implicit declaration of function 'BUILD_BUG_ON'
       make[2]: *** [lib/string.o] Error 1
       $
       $ grep linux/bug.h lib/string.c
       #include <linux/bug.h>
       $
 
 We've included <linux/bug.h> for the BUG infrastructure and yet we
 still get a compile fail!  [We've not kernel.h for BUILD_BUG_ON.]
 Ugh - very confusing for someone who is new to kernel development.
 
 With the above in mind, the goals of this changeset are:
 
 1) find and fix any include/*.h files that were relying on the
    implicit presence of BUG code.
 2) find and fix any C files that were consuming kernel.h and
    hence relying on implicitly getting some/all BUG code.
 3) Move the BUG related code living in kernel.h to <linux/bug.h>
 4) remove the asm/bug.h from kernel.h to finally break the chain.
 
 During development, the order was more like 3-4, build-test, 1-2.
 But to ensure that git history for bisect doesn't get needless
 build failures introduced, the commits have been reorderd to fix
 the problem areas in advance.
 
 [1]  https://lkml.org/lkml/2012/1/3/90
 [2]  https://lkml.org/lkml/2012/1/17/414
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPbNwpAAoJEOvOhAQsB9HWrqYP/A0t9VB0nK6e42F0OR2P14MZ
 GJFtf1B++wwioIrx+KSWSRfSur1C5FKhDbxLR3I/pvkAYl4+T4JvRdMG6xJwxyip
 CC1kVQQNDjWVVqzjz2x6rYkOffx6dUlw/ERyIyk+OzP+1HzRIsIrugMqbzGLlX0X
 y0v2Tbd0G6xg1DV8lcRdp95eIzcGuUvdb2iY2LGadWZczEOeSXx64Jz3QCFxg3aL
 LFU4oovsg8Nb7MRJmqDvHK/oQf5vaTm9WSrS0pvVte0msSQRn8LStYdWC0G9BPCS
 GwL86h/eLXlUXQlC5GpgWg1QQt5i2QpjBFcVBIG0IT5SgEPMx+gXyiqZva2KwbHu
 LKicjKtfnzPitQnyEV/N6JyV1fb1U6/MsB7ebU5nCCzt9Gr7MYbjZ44peNeprAtu
 HMvJ/BNnRr4Ha6nPQNu952AdASPKkxmeXFUwBL1zUbLkOX/bK/vy1ujlcdkFxCD7
 fP3t7hghYa737IHk0ehUOhrE4H67hvxTSCKioLUAy/YeN1IcfH/iOQiCBQVLWmoS
 AqYV6ou9cqgdYoyila2UeAqegb+8xyubPIHt+lebcaKxs5aGsTg+r3vq5juMDAPs
 iwSVYUDcIw9dHer1lJfo7QCy3QUTRDTxh+LB9VlHXQICgeCK02sLBOi9hbEr4/H8
 Ko9g8J3BMxcMkXLHT9ud
 =PYQT
 -----END PGP SIGNATURE-----

Merge tag 'bug-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull <linux/bug.h> cleanup from Paul Gortmaker:
 "The changes shown here are to unify linux's BUG support under the one
  <linux/bug.h> file.  Due to historical reasons, we have some BUG code
  in bug.h and some in kernel.h -- i.e.  the support for BUILD_BUG in
  linux/kernel.h predates the addition of linux/bug.h, but old code in
  kernel.h wasn't moved to bug.h at that time.  As a band-aid, kernel.h
  was including <asm/bug.h> to pseudo link them.

  This has caused confusion[1] and general yuck/WTF[2] reactions.  Here
  is an example that violates the principle of least surprise:

      CC      lib/string.o
      lib/string.c: In function 'strlcat':
      lib/string.c:225:2: error: implicit declaration of function 'BUILD_BUG_ON'
      make[2]: *** [lib/string.o] Error 1
      $
      $ grep linux/bug.h lib/string.c
      #include <linux/bug.h>
      $

  We've included <linux/bug.h> for the BUG infrastructure and yet we
  still get a compile fail! [We've not kernel.h for BUILD_BUG_ON.] Ugh -
  very confusing for someone who is new to kernel development.

  With the above in mind, the goals of this changeset are:

  1) find and fix any include/*.h files that were relying on the
     implicit presence of BUG code.
  2) find and fix any C files that were consuming kernel.h and hence
     relying on implicitly getting some/all BUG code.
  3) Move the BUG related code living in kernel.h to <linux/bug.h>
  4) remove the asm/bug.h from kernel.h to finally break the chain.

  During development, the order was more like 3-4, build-test, 1-2.  But
  to ensure that git history for bisect doesn't get needless build
  failures introduced, the commits have been reorderd to fix the problem
  areas in advance.

	[1]  https://lkml.org/lkml/2012/1/3/90
	[2]  https://lkml.org/lkml/2012/1/17/414"

Fix up conflicts (new radeon file, reiserfs header cleanups) as per Paul
and linux-next.

* tag 'bug-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  kernel.h: doesn't explicitly use bug.h, so don't include it.
  bug: consolidate BUILD_BUG_ON with other bug code
  BUG: headers with BUG/BUG_ON etc. need linux/bug.h
  bug.h: add include of it to various implicit C users
  lib: fix implicit users of kernel.h for TAINT_WARN
  spinlock: macroize assert_spin_locked to avoid bug.h dependency
  x86: relocate get/set debugreg fcns to include/asm/debugreg.
2012-03-24 10:08:39 -07:00
KAMEZAWA Hiroyuki 1ac101a5d6 procfs: add num_to_str() to speed up /proc/stat
== stat_check.py
num = 0
with open("/proc/stat") as f:
        while num < 1000 :
                data = f.read()
                f.seek(0, 0)
                num = num + 1
==

perf shows

    20.39%  stat_check.py  [kernel.kallsyms]    [k] format_decode
    13.41%  stat_check.py  [kernel.kallsyms]    [k] number
    12.61%  stat_check.py  [kernel.kallsyms]    [k] vsnprintf
    10.85%  stat_check.py  [kernel.kallsyms]    [k] memcpy
     4.85%  stat_check.py  [kernel.kallsyms]    [k] radix_tree_lookup
     4.43%  stat_check.py  [kernel.kallsyms]    [k] seq_printf

This patch removes most of calls to vsnprintf() by adding num_to_str()
and seq_print_decimal_ull(), which prints decimal numbers without rich
functions provided by printf().

On my 8cpu box.
== Before patch ==
[root@bluextal test]# time ./stat_check.py

real    0m0.150s
user    0m0.026s
sys     0m0.121s

== After patch ==
[root@bluextal test]# time ./stat_check.py

real    0m0.055s
user    0m0.022s
sys     0m0.030s

[akpm@linux-foundation.org: remove incorrect comment, use less statck in num_to_str(), move comment from .h to .c, simplify seq_put_decimal_ull()]
[andrea@betterlinux.com: avoid breaking the ABI in /proc/stat]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrea Righi <andrea@betterlinux.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Turner <pjt@google.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:42 -07:00
Joe Perches 6061d949dd include/ and checkpatch: prefer __scanf to __attribute__((format(scanf,...)
It's equivalent to __printf, so prefer __scanf.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:36 -07:00
Ingo Molnar 6605f9ac69 Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/urgent 2012-03-22 09:17:57 +01:00
Steven Rostedt 93d68e5229 tracing: Move the tracing_on/off() declarations into CONFIG_TRACING
The tracing_on/off() declarations were under CONFIG_RING_BUFFER, but
the functions are now only defined under CONFIG_TRACING as they are
specific to ftrace and not the ring buffer.

But the declarations were still defined under the ring buffer and
this caused the build to fail when CONFIG_RING_BUFFER was set but
CONFIG_TRACING was not.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-20 12:28:29 -04:00
Salman Qazi 9993bc635d sched/x86: Fix overflow in cyc2ns_offset
When a machine boots up, the TSC generally gets reset.  However,
when kexec is used to boot into a kernel, the TSC value would be
carried over from the previous kernel.  The computation of
cycns_offset in set_cyc2ns_scale is prone to an overflow, if the
machine has been up more than 208 days prior to the kexec.  The
overflow happens when we multiply *scale, even though there is
enough room to store the final answer.

We fix this issue by decomposing tsc_now into the quotient and
remainder of division by CYC2NS_SCALE_FACTOR and then performing
the multiplication separately on the two components.

Refactor code to share the calculation with the previous
fix in __cycles_2_ns().

Signed-off-by: Salman Qazi <sqazi@google.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Turner <pjt@google.com>
Cc: john stultz <johnstul@us.ibm.com>
Link: http://lkml.kernel.org/r/20120310004027.19291.88460.stgit@dungbeetle.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 16:27:51 +01:00
Paul Gortmaker 6c03438ede kernel.h: doesn't explicitly use bug.h, so don't include it.
This header isn't using bug.h infrastructure, but due to historical
reasons, it was including it.  Removing it revealed several implicit
dependencies (since kernel.h is everywhere) so we've fixed those 1st
before deploying this change.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-03-04 17:54:36 -05:00
Paul Gortmaker 35edd9103c bug: consolidate BUILD_BUG_ON with other bug code
The support for BUILD_BUG in linux/kernel.h predates the
addition of linux/bug.h -- with this chunk off separate,
you can run into situations where a person gets a compile
fail even when they've included linux/bug.h, like this:

    CC      lib/string.o
  lib/string.c: In function 'strlcat':
  lib/string.c:225:2: error: implicit declaration of function 'BUILD_BUG_ON'
  make[2]: *** [lib/string.o] Error 1
  $
  $ grep linux/bug.h lib/string.c
  #include <linux/bug.h>
  $

Since the above violates the principle of least surprise, move
the BUG chunks from kernel.h to bug.h so it is all together.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-03-04 17:54:35 -05:00
H. Peter Anvin d8e5ddef21 sysinfo: Move struct sysinfo to a separate header file
struct sysinfo is just about the only thing exported to userspace from
<linux/kernel.h>, so move it into a separate header file with a
residual #include in <linux/kernel.h>.

Originally-by: H. J. Lu <hjl.tools@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/n/tip-4pr1xnnksprt7t0h3w5fw4rv@git.kernel.org
2012-02-20 12:48:46 -08:00
Joe Perches ff2d8b19a3 treewide: convert uses of ATTRIB_NORETURN to __noreturn
Use the more commonly used __noreturn instead of ATTRIB_NORETURN.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:03 -08:00
Joe Perches 9402c95f34 treewide: remove useless NORET_TYPE macro and uses
It's a very old and now unused prototype marking so just delete it.

Neaten panic pointer argument style to keep checkpatch quiet.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:03 -08:00
Joe Perches 4da4785995 kernel.h: neaten panic prototype
Use __printf macro.
Convert NORET_AND to ATTRIB_NORET.
Use the normal kernel style for pointer arguments.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:02 -08:00
Linus Torvalds 541048a1d3 Merge branch 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, reboot: Fix typo in nmi reboot path
  x86, NMI: Add to_cpumask() to silence compile warning
  x86, NMI: NMI selftest depends on the local apic
  x86: Add stack top margin for stack overflow checking
  x86, NMI: NMI-selftest should handle the UP case properly
  x86: Fix the 32-bit stackoverflow-debug build
  x86, NMI: Add knob to disable using NMI IPIs to stop cpus
  x86, NMI: Add NMI IPI selftest
  x86, reboot: Use NMI instead of REBOOT_VECTOR to stop cpus
  x86: Clean up the range of stack overflow checking
  x86: Panic on detection of stack overflow
  x86: Check stack overflow in detail
2012-01-11 19:13:04 -08:00