Commit Graph

12812 Commits

Author SHA1 Message Date
Linus Torvalds 3ec1e88b33 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Says Jens:

 "Time to push off some of the pending items.  I really wanted to wait
  until we had the regression nailed, but alas it's not quite there yet.
  But I'm very confident that it's "just" a missing expire on exit, so
  fix from Tejun should be fairly trivial.  I'm headed out for a week on
  the slopes.

  - Killing the barrier part of mtip32xx.  It doesn't really support
    barriers, and it doesn't need them (writes are fully ordered).

  - A few fixes from Dan Carpenter, preventing overflows of integer
    multiplication.

  - A fixup for loop, fixing a previous commit that didn't quite solve
    the partial read problem from Dave Young.

  - A bio integer overflow fix from Kent Overstreet.

  - Improvement/fix of the door "keep locked" part of the cdrom shared
    code from Paolo Benzini.

  - A few cfq fixes from Shaohua Li.

  - A fix for bsg sysfs warning when removing a file it did not create
    from Stanislaw Gruszka.

  - Two fixes for floppy from Vivek, preventing a crash.

  - A few block core fixes from Tejun.  One killing the over-optimized
    ioc exit path, cleaning that up nicely.  Two others fixing an oops
    on elevator switch, due to calling into the scheduler merge check
    code without holding the queue lock."

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix lockdep warning on io_context release put_io_context()
  relay: prevent integer overflow in relay_open()
  loop: zero fill bio instead of return -EIO for partial read
  bio: don't overflow in bio_get_nr_vecs()
  floppy: Fix a crash during rmmod
  floppy: Cleanup disk->queue before caling put_disk() if add_disk() was never called
  cdrom: move shared static to cdrom_device_info
  bsg: fix sysfs link remove warning
  block: don't call elevator callbacks for plug merges
  block: separate out blk_rq_merge_ok() and blk_try_merge() from elevator functions
  mtip32xx: removed the irrelevant argument of mtip_hw_submit_io() and the unused member of struct driver_data
  block: strip out locking optimization in put_io_context()
  cdrom: use copy_to_user() without the underscores
  block: fix ioc locking warning
  block: fix NULL icq_cache reference
  block,cfq: change code order
2012-02-11 10:07:11 -08:00
Linus Torvalds ce2814f227 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix double start/stop in x86_pmu_start()
  perf evsel: Fix an issue where perf report fails to show the proper percentage
  perf tools: Fix prefix matching for kernel maps
  perf tools: Fix perf stack to non executable on x86_64
  perf: Remove deprecated WARN_ON_ONCE()
2012-02-10 09:05:07 -08:00
Dan Carpenter f6302f1bcd relay: prevent integer overflow in relay_open()
"subbuf_size" and "n_subbufs" come from the user and they need to be
capped to prevent an integer overflow.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-10 09:04:49 +01:00
Stephane Eranian f39d47ff81 perf: Fix double start/stop in x86_pmu_start()
The following patch fixes a bug introduced by the following
commit:

        e050e3f0a7 ("perf: Fix broken interrupt rate throttling")

The patch caused the following warning to pop up depending on
the sampling frequency adjustments:

  ------------[ cut here ]------------
  WARNING: at arch/x86/kernel/cpu/perf_event.c:995 x86_pmu_start+0x79/0xd4()

It was caused by the following call sequence:

perf_adjust_freq_unthr_context.part() {
     stop()
     if (delta > 0) {
          perf_adjust_period() {
              if (period > 8*...) {
                  stop()
                  ...
                  start()
              }
          }
      }
      start()
}

Which caused a double start and a double stop, thus triggering
the assert in x86_pmu_start().

The patch fixes the problem by avoiding the double calls. We
pass a new argument to perf_adjust_period() to indicate whether
or not the event is already stopped. We can't just remove the
start/stop from that function because it's called from
__perf_event_overflow where the event needs to be reloaded via a
stop/start back-toback call.

The patch reintroduces the assertion in x86_pmu_start() which
was removed by commit:

	84f2b9b ("perf: Remove deprecated WARN_ON_ONCE()")

In this second version, we've added calls to disable/enable PMU
during unthrottling or frequency adjustment based on bug report
of spurious NMI interrupts from Eric Dumazet.

Reported-and-tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: markus@trippelsdorf.de
Cc: paulus@samba.org
Link: http://lkml.kernel.org/r/20120207133956.GA4932@quad
[ Minor edits to the changelog and to the code ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-07 16:58:56 +01:00
Tejun Heo 11a3122f6c block: strip out locking optimization in put_io_context()
put_io_context() performed a complex trylock dancing to avoid
deferring ioc release to workqueue.  It was also broken on UP because
trylock was always assumed to succeed which resulted in unbalanced
preemption count.

While there are ways to fix the UP breakage, even the most
pathological microbench (forced ioc allocation and tight fork/exit
loop) fails to show any appreciable performance benefit of the
optimization.  Strip it out.  If there turns out to be workloads which
are affected by this change, simpler optimization from the discussion
thread can be applied later.

Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <1328514611.21268.66.camel@sli10-conroe>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-07 07:51:30 +01:00
Linus Torvalds 23783f817b Power management fixes for 3.3-rc3
Three power management regression fixes, one for a recent regression introcuded
 by the freezer changes during the 3.3 merge window and two for regressions
 in cpuidle (resulting from PM QoS changes) and in the hibernate user space
 interface, both introduced during the 3.2 development cycle.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJPLbiPAAoJEKhOf7ml8uNscvwQAJYYhSBL+ouK8ERS0OLkeEoB
 k4O1Ap0hb5Kv54Sr85WKEm5zGRDJXUxlWeMklo9K/fvs04CU1gsBb8jhDdbZ2ovE
 rnyybPjfieExQbLxX6nYIP4qKMLtnZvHhHpafuDSUz0RWq/7sCTiFI2htNj97gGu
 DzXYpeePFgvzG6AaznywWkvNdXoQfmsTC0adDrXWcuKXnNrH6h8o/OIB+pO70Szw
 gmU8SjVGGQjrlnuQ+Ku4WqbSyXs1bXlUkyTHJilg6CNJySrA/LUHhKPrRnP1i3Hu
 LxX/rsrTqohhD1tz1qQOpnMiu86FSez+UVA65b2cF3EqZbNROY2+O1/V+OlczKYy
 V9Q3rk+J4uRJtnL8DEgcniMGrRsjyle5USN5KDX50BkrC56h3mZirnEu1yaiMIJn
 K8NWI/4JdK7JbA6f2hXuPuesmudSP4uo8vuUzKthEUi88QReYXYSMcz/Fy/G9z8n
 JW7PimC5OmeTwYIqBcjZf+8j/1u6cHaEkvjPAJhIUgCR/ZVi6VFySnUByDD6JKTJ
 bQcUSqZZ8TvEc4A6JjG18/QfmWIZMErfuG0WAKb8sqtXoPkHKR/XXjbaXof9Oppn
 nRS5iJUaZGY4YivSHZZOFAk24ThqKx5ZK3qXq/dBbj9JwtJdc+++b9f0RwXUHjd9
 ECoM3bFtO8ewINmZ7wRQ
 =EKGs
 -----END PGP SIGNATURE-----

Merge tag 'pm-fixes-for-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Power management fixes for 3.3-rc3

Three power management regression fixes, one for a recent regression introcuded
by the freezer changes during the 3.3 merge window and two for regressions
in cpuidle (resulting from PM QoS changes) and in the hibernate user space
interface, both introduced during the 3.2 development cycle.

They include:

* Two hibernate (s2disk) regression fixes from Srivatsa S. Bhat (for
 regressions introduced during the 3.3 merge window and during the 3.2
 development cycle).

* A cpuidle fix from Venki Pallipadi for a regression resulting from PM QoS
 changes during the 3.2 development cycle causing cpuidle to work incorrectly
 for CONFIG_PM unset.

* tag 'pm-fixes-for-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / QoS: CPU C-state breakage with PM Qos change
  PM / Freezer: Thaw only kernel threads if freezing of kernel threads fails
  PM / Hibernate: Thaw kernel threads in SNAPSHOT_CREATE_IMAGE ioctl path
2012-02-04 15:21:39 -08:00
Srivatsa S. Bhat 379e0be812 PM / Freezer: Thaw only kernel threads if freezing of kernel threads fails
If freezing of kernel threads fails, we are expected to automatically
thaw tasks in the error recovery path. However, at times, we encounter
situations in which we would like the automatic error recovery path
to thaw only the kernel threads, because we want to be able to do
some more cleanup before we thaw userspace. Something like:

error = freeze_kernel_threads();
if (error) {
	/* Do some cleanup */

	/* Only then thaw userspace tasks*/
	thaw_processes();
}

An example of such a situation is where we freeze/thaw filesystems
during suspend/hibernation. There, if freezing of kernel threads
fails, we would like to thaw the frozen filesystems before thawing
the userspace tasks.

So, modify freeze_kernel_threads() to thaw only kernel threads in
case of freezing failure. And change suspend_freeze_processes()
accordingly. (At the same time, let us also get rid of the rather
cryptic usage of the conditional operator (:?) in that function.)

[rjw: In fact, this patch fixes a regression introduced during the
 3.3 merge window, because without it thaw_processes() may be called
 before swsusp_free() in some situations and that may lead to massive
 memory allocation failures.]

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Nigel Cunningham <nigel@tuxonice.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-02-04 22:23:05 +01:00
Jiang Liu 55ca6140e9 kprobes: fix a memory leak in function pre_handler_kretprobe()
In function pre_handler_kretprobe(), the allocated kretprobe_instance
object will get leaked if the entry_handler callback returns non-zero.
This may cause all the preallocated kretprobe_instance objects exhausted.

This issue can be reproduced by changing
samples/kprobes/kretprobe_example.c to probe "mutex_unlock".  And the fix
is straightforward: just put the allocated kretprobe_instance object back
onto the free_instances list.

[akpm@linux-foundation.org: use raw_spin_lock/unlock]
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-03 16:16:41 -08:00
Christopher Yeoh 8cdb878dcb Fix race in process_vm_rw_core
This fixes the race in process_vm_core found by Oleg (see

  http://article.gmane.org/gmane.linux.kernel/1235667/

for details).

This has been updated since I last sent it as the creation of the new
mm_access() function did almost exactly the same thing as parts of the
previous version of this patch did.

In order to use mm_access() even when /proc isn't enabled, we move it to
kernel/fork.c where other related process mm access functions already
are.

Signed-off-by: Chris Yeoh <yeohc@au1.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-02 12:55:17 -08:00
Linus Torvalds 2f2fde9272 Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus', 'sched-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  bugs, x86: Fix printk levels for panic, softlockups and stack dumps

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf top: Fix number of samples displayed
  perf tools: Fix strlen() bug in perf_event__synthesize_event_type()
  perf tools: Fix broken build by defining _GNU_SOURCE in Makefile
  x86/dumpstack: Remove unneeded check in dump_trace()
  perf: Fix broken interrupt rate throttling

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/rt: Fix task stack corruption under __ARCH_WANT_INTERRUPTS_ON_CTXSW
  sched: Fix ancient race in do_exit()
  sched/nohz: Fix nohz cpu idle load balancing state with cpu hotplug
  sched/s390: Fix compile error in sched/core.c
  sched: Fix rq->nr_uninterruptible update race

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/reboot: Remove VersaLogic Menlow reboot quirk
  x86/reboot: Skip DMI checks if reboot set by user
  x86: Properly parenthesize cmpxchg() macro arguments
2012-02-02 11:11:13 -08:00
Srivatsa S. Bhat fe9161db2e PM / Hibernate: Thaw kernel threads in SNAPSHOT_CREATE_IMAGE ioctl path
In the SNAPSHOT_CREATE_IMAGE ioctl, if the call to hibernation_snapshot()
fails, the frozen tasks are not thawed.

And in the case of success, if we happen to exit due to a successful freezer
test, all tasks (including those of userspace) are thawed, whereas actually
we should have thawed only the kernel threads at that point. Fix both these
issues.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@vger.kernel.org
2012-02-01 22:16:36 +01:00
Rafael J. Wysocki 181e9bdef3 PM / Hibernate: Fix s2disk regression related to freezing workqueues
Commit 2aede851dd

  PM / Hibernate: Freeze kernel threads after preallocating memory

introduced a mechanism by which kernel threads were frozen after
the preallocation of hibernate image memory to avoid problems with
frozen kernel threads not responding to memory freeing requests.
However, it overlooked the s2disk code path in which the
SNAPSHOT_CREATE_IMAGE ioctl was run directly after SNAPSHOT_FREE,
which caused freeze_workqueues_begin() to BUG(), because it saw
that worqueues had been already frozen.

Although in principle this issue might be addressed by removing
the relevant BUG_ON() from freeze_workqueues_begin(), that would
reintroduce the very problem that commit 2aede851dd
attempted to avoid into that particular code path.  For this reason,
to fix the issue at hand, introduce thaw_kernel_threads() and make
the SNAPSHOT_FREE ioctl execute it.

Special thanks to Srivatsa S. Bhat for detailed analysis of the
problem.

Reported-and-tested-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: stable@kernel.org
2012-01-29 20:35:52 +01:00
Chanho Min cb297a3e43 sched/rt: Fix task stack corruption under __ARCH_WANT_INTERRUPTS_ON_CTXSW
This issue happens under the following conditions:

 1. preemption is off
 2. __ARCH_WANT_INTERRUPTS_ON_CTXSW is defined
 3. RT scheduling class
 4. SMP system

Sequence is as follows:

 1.suppose current task is A. start schedule()
 2.task A is enqueued pushable task at the entry of schedule()
   __schedule
    prev = rq->curr;
    ...
    put_prev_task
     put_prev_task_rt
      enqueue_pushable_task
 4.pick the task B as next task.
   next = pick_next_task(rq);
 3.rq->curr set to task B and context_switch is started.
   rq->curr = next;
 4.At the entry of context_swtich, release this cpu's rq->lock.
   context_switch
    prepare_task_switch
     prepare_lock_switch
      raw_spin_unlock_irq(&rq->lock);
 5.Shortly after rq->lock is released, interrupt is occurred and start IRQ context
 6.try_to_wake_up() which called by ISR acquires rq->lock
    try_to_wake_up
     ttwu_remote
      rq = __task_rq_lock(p)
      ttwu_do_wakeup(rq, p, wake_flags);
        task_woken_rt
 7.push_rt_task picks the task A which is enqueued before.
   task_woken_rt
    push_rt_tasks(rq)
     next_task = pick_next_pushable_task(rq)
 8.At find_lock_lowest_rq(), If double_lock_balance() returns 0,
   lowest_rq can be the remote rq.
  (But,If preemption is on, double_lock_balance always return 1 and it
   does't happen.)
   push_rt_task
    find_lock_lowest_rq
     if (double_lock_balance(rq, lowest_rq))..
 9.find_lock_lowest_rq return the available rq. task A is migrated to
   the remote cpu/rq.
   push_rt_task
    ...
    deactivate_task(rq, next_task, 0);
    set_task_cpu(next_task, lowest_rq->cpu);
    activate_task(lowest_rq, next_task, 0);
 10. But, task A is on irq context at this cpu.
     So, task A is scheduled by two cpus at the same time until restore from IRQ.
     Task A's stack is corrupted.

To fix it, don't migrate an RT task if it's still running.

Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/CAOAMb1BHA=5fm7KTewYyke6u-8DP0iUuJMpgQw54vNeXFsGpoQ@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-27 12:49:41 +01:00
Stephane Eranian e050e3f0a7 perf: Fix broken interrupt rate throttling
This patch fixes the sampling interrupt throttling mechanism.

It was broken in v3.2. Events were not being unthrottled. The
unthrottling mechanism required that events be checked at each
timer tick.

This patch solves this problem and also separates:

  - unthrottling
  - multiplexing
  - frequency-mode period adjustments

Not all of them need to be executed at each timer tick.

This third version of the patch is based on my original patch +
PeterZ proposal (https://lkml.org/lkml/2012/1/7/87).

At each timer tick, for each context:

  - if the current CPU has throttled events, we unthrottle events

  - if context has frequency-based events, we adjust sampling periods

  - if we have reached the jiffies interval, we multiplex (rotate)

We decoupled rotation (multiplexing) from frequency-mode sampling
period adjustments.  They should not necessarily happen at the same
rate. Multiplexing is subject to jiffies_interval (currently at 1
but could be higher once the tunable is exposed via sysfs).

We have grouped frequency-mode adjustment and unthrottling into the
same routine to minimize code duplication. When throttled while in
frequency mode, we scan the events only once.

We have fixed the threshold enforcement code in __perf_event_overflow().
There was a bug whereby it would allow more than the authorized rate
because an increment of hwc->interrupts was not executed at the right
place.

The patch was tested with low sampling limit (2000) and fixed periods,
frequency mode, overcommitted PMU.

On a 2.1GHz AMD CPU:

 $ cat /proc/sys/kernel/perf_event_max_sample_rate
 2000

We set a rate of 3000 samples/sec (2.1GHz/3000 = 700000):

 $ perf record -e cycles,cycles -c 700000  noploop 10
 $ perf report -D | tail -21

 Aggregated stats:
           TOTAL events:      80086
            MMAP events:         88
            COMM events:          2
            EXIT events:          4
        THROTTLE events:      19996
      UNTHROTTLE events:      19996
          SAMPLE events:      40000

 cycles stats:
           TOTAL events:      40006
            MMAP events:          5
            COMM events:          1
            EXIT events:          4
        THROTTLE events:       9998
      UNTHROTTLE events:       9998
          SAMPLE events:      20000

 cycles stats:
           TOTAL events:      39996
        THROTTLE events:       9998
      UNTHROTTLE events:       9998
          SAMPLE events:      20000

For 10s, the cap is 2x2000x10 = 40000 samples.
We get exactly that: 20000 samples/event.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: <stable@kernel.org> # v3.2+
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120126160319.GA5655@quad
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-27 12:06:39 +01:00
Yasunori Goto b5740f4b2c sched: Fix ancient race in do_exit()
try_to_wake_up() has a problem which may change status from TASK_DEAD to
TASK_RUNNING in race condition with SMI or guest environment of virtual
machine. As a result, exited task is scheduled() again and panic occurs.

Here is the sequence how it occurs:

 ----------------------------------+-----------------------------
                                   |
            CPU A                  |             CPU B
 ----------------------------------+-----------------------------

TASK A calls exit()....

do_exit()

  exit_mm()
    down_read(mm->mmap_sem);

    rwsem_down_failed_common()

      set TASK_UNINTERRUPTIBLE
      set waiter.task <= task A
      list_add to sem->wait_list
           :
      raw_spin_unlock_irq()
      (I/O interruption occured)

                                      __rwsem_do_wake(mmap_sem)

                                        list_del(&waiter->list);
                                        waiter->task = NULL
                                        wake_up_process(task A)
                                          try_to_wake_up()
                                             (task is still
                                               TASK_UNINTERRUPTIBLE)
                                              p->on_rq is still 1.)

                                              ttwu_do_wakeup()
                                                 (*A)
                                                   :
     (I/O interruption handler finished)

      if (!waiter.task)
          schedule() is not called
          due to waiter.task is NULL.

      tsk->state = TASK_RUNNING

          :
                                              check_preempt_curr();
                                                  :
  task->state = TASK_DEAD
                                              (*B)
                                        <---    set TASK_RUNNING (*C)

     schedule()
     (exit task is running again)
     BUG_ON() is called!
 --------------------------------------------------------

The execution time between (*A) and (*B) is usually very short,
because the interruption is disabled, and setting TASK_RUNNING at (*C)
must be executed before setting TASK_DEAD.

HOWEVER, if SMI is interrupted between (*A) and (*B),
(*C) is able to execute AFTER setting TASK_DEAD!
Then, exited task is scheduled again, and BUG_ON() is called....

If the system works on guest system of virtual machine, the time
between (*A) and (*B) may be also long due to scheduling of hypervisor,
and same phenomenon can occur.

By this patch, do_exit() waits for releasing task->pi_lock which is used
in try_to_wake_up(). It guarantees the task becomes TASK_DEAD after
waking up.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20120117174031.3118.E1E9C6FF@jp.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-27 11:55:36 +01:00
Linus Torvalds b57cea5e33 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Call perf_cgroup_event_time() directly
  perf: Don't call release_callchain_buffers() if allocation fails
2012-01-26 12:45:57 -08:00
Linus Torvalds 2437dcbf55 Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Add missing __cpuinit annotation in rcutorture code
  sched: Add "const" to is_idle_task() parameter
  rcu: Make rcutorture bool parameters really bool (core code)
  memblock: Fix alloc failure due to dumb underflow protection in memblock_find_in_range_node()
2012-01-26 12:45:41 -08:00
Prarit Bhargava b0f4c4b32c bugs, x86: Fix printk levels for panic, softlockups and stack dumps
rsyslog will display KERN_EMERG messages on a connected
terminal.  However, these messages are useless/undecipherable
for a general user.

For example, after a softlockup we get:

 Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
 kernel:Stack:

 Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
 kernel:Call Trace:

 Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
 kernel:Code: ff ff a8 08 75 25 31 d2 48 8d 86 38 e0 ff ff 48 89
 d1 0f 01 c8 0f ae f0 48 8b 86 38 e0 ff ff a8 08 75 08 b1 01 4c 89 e0 0f 01 c9 <e8> ea 69 dd ff 4c 29 e8 48 89 c7 e8 0f bc da ff 49 89 c4 49 89

This happens because the printk levels for these messages are
incorrect. Only an informational message should be displayed on
a terminal.

I modified the printk levels for various messages in the kernel
and tested the output by using the drivers/misc/lkdtm.c kernel
modules (ie, softlockups, panics, hard lockups, etc.) and
confirmed that the console output was still the same and that
the output to the terminals was correct.

For example, in the case of a softlockup we now see the much
more informative:

 Message from syslogd@intel-s3e37-04 at Jan 25 10:18:06 ...
 BUG: soft lockup - CPU4 stuck for 60s!

instead of the above confusing messages.

AFAICT, the messages no longer have to be KERN_EMERG.  In the
most important case of a panic we set console_verbose().  As for
the other less severe cases the correct data is output to the
console and /var/log/messages.

Successfully tested by me using the drivers/misc/lkdtm.c module.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: dzickus@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1327586134-11926-1-git-send-email-prarit@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 21:28:45 +01:00
Suresh Siddha 71325960d1 sched/nohz: Fix nohz cpu idle load balancing state with cpu hotplug
With the recent nohz scheduler changes, rq's nohz flag
'NOHZ_TICK_STOPPED' and its associated state doesn't get cleared
immediately after the cpu exits idle. This gets cleared as part
of the next tick seen on that cpu.

For the cpu offline support, we need to clear this state
manually. Fix it by registering a cpu notifier, which clears the
nohz idle load balance state for this rq explicitly during the
CPU_DYING notification.

There won't be any nohz updates for that cpu, after the
CPU_DYING notification. But lets be extra paranoid and skip
updating the nohz state in the select_nohz_load_balancer() if
the cpu is not in active state anymore.

Reported-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Reviewed-and-tested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1327026538.16150.40.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 19:38:13 +01:00
Christian Borntraeger db7e527da4 sched/s390: Fix compile error in sched/core.c
Commit 029632fbb7 ("sched: Make
separate sched*.c translation units") removed the include of
asm/mutex.h from sched.c.

This breaks the combination of:

 CONFIG_MUTEX_SPIN_ON_OWNER=yes
 CONFIG_HAVE_ARCH_MUTEX_CPU_RELAX=yes

like s390 without mutex debugging:

  CC      kernel/sched/core.o
  kernel/sched/core.c: In function ‘mutex_spin_on_owner’:
  kernel/sched/core.c:3287: error: implicit declaration of function ‘arch_mutex_cpu_relax’

Lets re-add the include to kernel/sched/core.c

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1326268696-30904-1-git-send-email-borntraeger@de.ibm.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 19:38:11 +01:00
Peter Zijlstra 4ca9b72b71 sched: Fix rq->nr_uninterruptible update race
KOSAKI Motohiro noticed the following race:

 > CPU0                    CPU1
 > --------------------------------------------------------
 > deactivate_task()
 >                         task->state = TASK_UNINTERRUPTIBLE;
 > activate_task()
 >    rq->nr_uninterruptible--;
 >
 >                         schedule()
 >                           deactivate_task()
 >                             rq->nr_uninterruptible++;
 >

Kosaki-San's scenario is possible when CPU0 runs
__sched_setscheduler() against CPU1's current @task.

__sched_setscheduler() does a dequeue/enqueue in order to move
the task to its new queue (position) to reflect the newly provided
scheduling parameters. However it should be completely invariant to
nr_uninterruptible accounting, sched_setscheduler() doesn't affect
readyness to run, merely policy on when to run.

So convert the inappropriate activate/deactivate_task usage to
enqueue/dequeue_task, which avoids the nr_uninterruptible accounting.

Also convert the two other sites: __migrate_task() and
normalize_task() that still use activate/deactivate_task. These sites
aren't really a problem since __migrate_task() will only be called on
non-running task (and therefore are immume to the described problem)
and normalize_task() isn't ever used on regular systems.

Also remove the comments from activate/deactivate_task since they're
misleading at best.

Reported-by: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1327486224.2614.45.camel@laptop
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 19:38:09 +01:00
Linus Torvalds 701b259f44 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Davem says:

1) Fix JIT code generation on x86-64 for divide by zero, from Eric Dumazet.

2) tg3 header length computation correction from Eric Dumazet.

3) More build and reference counting fixes for socket memory cgroup
   code from Glauber Costa.

4) module.h snuck back into a core header after all the hard work we
   did to remove that, from Paul Gortmaker and Jesper Dangaard Brouer.

5) Fix PHY naming regression and add some new PCI IDs in stmmac, from
   Alessandro Rubini.

6) Netlink message generation fix in new team driver, should only advertise
   the entries that changed during events, from Jiri Pirko.

7) SRIOV VF registration and unregistration fixes, and also add a
   missing PCI ID, from Roopa Prabhu.

8) Fix infinite loop in tx queue flush code of brcmsmac, from Stanislaw Gruszka.

9) ftgmac100/ftmac100 build fix, missing interrupt.h include.

10) Memory leak fix in net/hyperv do_set_mutlicast() handling, from Wei Yongjun.

11) Off by one fix in netem packet scheduler, from Vijay Subramanian.

12) TCP loss detection fix from Yuchung Cheng.

13) TCP reset packet MD5 calculation uses wrong address, fix from Shawn Lu.

14) skge carrier assertion and DMA mapping fixes from Stephen Hemminger.

15) Congestion recovery undo performed at the wrong spot in BIC and CUBIC
    congestion control modules, fix from Neal Cardwell.

16) Ethtool ETHTOOL_GSSET_INFO is unnecessarily restrictive, from Michał Mirosław.

17) Fix triggerable race in ipv6 sysctl handling, from Francesco Ruggeri.

18) Statistics bug fixes in mlx4 from Eugenia Emantayev.

19) rds locking bug fix during info dumps, from your's truly.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
  rds: Make rds_sock_lock BH rather than IRQ safe.
  netprio_cgroup.h: dont include module.h from other includes
  net: flow_dissector.c missing include linux/export.h
  team: send only changed options/ports via netlink
  net/hyperv: fix possible memory leak in do_set_multicast()
  drivers/net: dsa/mv88e6xxx.c files need linux/module.h
  stmmac: added PCI identifiers
  llc: Fix race condition in llc_ui_recvmsg
  stmmac: fix phy naming inconsistency
  dsa: Add reporting of silicon revision for Marvell 88E6123/88E6161/88E6165 switches.
  tg3: fix ipv6 header length computation
  skge: add byte queue limit support
  mv643xx_eth: Add Rx Discard and Rx Overrun statistics
  bnx2x: fix compilation error with SOE in fw_dump
  bnx2x: handle CHIP_REVISION during init_one
  bnx2x: allow user to change ring size in ISCSI SD mode
  bnx2x: fix Big-Endianess in ethtool -t
  bnx2x: fixed ethtool statistics for MF modes
  bnx2x: credit-leakage fixup on vlan_mac_del_all
  macvlan: fix a possible use after free
  ...
2012-01-24 15:51:40 -08:00
Linus Torvalds ac1e3d4f5c Power management fixes for 3.3
Two fixes for regressions introduced during the merge window, one fix for
 a long-standing obscure issue in the computation of hibernate image size
 and two small PM documentation fixes.
 
 Namhyung Kim (1):
       PM / Hibernate: Correct additional pages number calculation
 
 Srivatsa S. Bhat (1):
       PM / Hibernate: Rewrite unlock_system_sleep() to fix s2disk regression
 
 Tetsuo Handa (1):
       PM / Sleep: Fix read_unlock_usermodehelper() call.
 
 Viresh Kumar (2):
       PM / Documentation: Fix spelling mistake in basic-pm-debugging.txt
       PM / Documentation: Fix minor issue in freezing_of_tasks.txt
 
  Documentation/power/basic-pm-debugging.txt |    2 +-
  Documentation/power/freezing-of-tasks.txt  |    8 ++++----
  drivers/base/firmware_class.c              |    3 +--
  include/linux/suspend.h                    |   19 +++++++++++++++++--
  kernel/power/snapshot.c                    |    3 ++-
  5 files changed, 25 insertions(+), 10 deletions(-)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJPHdAnAAoJEKhOf7ml8uNsMOgQAJVw9lUK1grMRoWILq/oAIAy
 jWQfcVmLq04T32ZTAqohocMsJHTRRgHzhP60zWmiUtpiikO7UJT/sMPt1vSIMxOg
 83dT0s4VLCrHjpKW2J3UbyUq9CGlXjMchkwt5ZwCtQtGoNNBg3Q8ZCtS6ksUh7+c
 1xnUANBdHXzoz8gp9zemoW05vZu7KFX5SWuWYv+5FLd7gb0GpOFZksBAgQ7KAOwT
 jk2sx20yeXoCFshWTVIaDQa9ydQxGyfWu7ZoTst3fNJvpwXwozEFCSro/WsF4FFQ
 fwOl8hU6Ptaogy6VuzQZ8B9XNKxgzcSDfLqvmynUAzWbwZkgW7V9EA0cRmnyBI4C
 Mmus5npRq+zC09e82noPDI8Y+gOMe70u/pHPL/9aSiK8D97baQd7JCwV9iCf3bxr
 h+woLfEF3maMV0vdfzFz6Zh435oO668ZGUUxqSpFIKyJ2uVcCKRrpEo47N1xKChr
 msH8sSLl4yrVYg0XUhN62qOrPiMvWw0i6httrXXOBMs4jVEBNrdSUSeAjn269gsx
 xaDZS9teZNnn3Vf/lJdPvPC7dvz394mOkWOq707S/D/hHdA96dYii5PET366FNjE
 O0jgCrlbRLnFmcngeBdklxu2Zf1GIhSw+Lk+LdwnEloSZ4RKMjUy0vf4l5shDS02
 N/e4vEbwR68dN8Hg5evl
 =dgnH
 -----END PGP SIGNATURE-----

Merge tag 'pm-fixes-for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Power management fixes for 3.3

Two fixes for regressions introduced during the merge window, one fix for
a long-standing obscure issue in the computation of hibernate image size
and two small PM documentation fixes.

* tag 'pm-fixes-for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / Sleep: Fix read_unlock_usermodehelper() call.
  PM / Hibernate: Rewrite unlock_system_sleep() to fix s2disk regression
  PM / Hibernate: Correct additional pages number calculation
  PM / Documentation: Fix minor issue in freezing_of_tasks.txt
  PM / Documentation: Fix spelling mistake in basic-pm-debugging.txt
2012-01-23 15:11:27 -08:00
Linus Torvalds a99cbf6b43 Merge branch 'kernel-doc' from Randy Dunlap
The usual kernel-doc fixups from Randy.  Some of them David acked as
merged in his tree, this is the random left-overs.

* kernel-doc:
  docbook: fix sched source file names in device-drivers book
  docbook: change iomap source filename in deviceiobook
  docbook: don't use serial_core.h in device-drivers book
  kernel-doc: fix kernel-doc warnings in sched
  kernel-doc: fix new warnings in cfg80211.h
  kernel-doc: fix new warning in usb.h
  kernel-doc: fix new warnings in device.h
  kernel-doc: fix new warnings in debugfs
  kernel-doc: fix new warning in regulator core
  kernel-doc: fix new warnings in pci
  kernel-doc: fix new warnings in driver-core
  kernel-doc: fix new warnings in auditsc.c
  scripts/kernel-doc: fix fatal error caused by cfg80211.h
2012-01-23 10:08:08 -08:00
Randy Dunlap fa757281a0 kernel-doc: fix kernel-doc warnings in sched
Fix new kernel-doc notation warnings:

Warning(include/linux/sched.h:2094): No description found for parameter 'p'
Warning(include/linux/sched.h:2094): Excess function parameter 'tsk' description in 'is_idle_task'
Warning(kernel/sched/cpupri.c:139): No description found for parameter 'newpri'
Warning(kernel/sched/cpupri.c:139): Excess function parameter 'pri' description in 'cpupri_set'
Warning(kernel/sched/cpupri.c:208): Excess function parameter 'bootmem' description in 'cpupri_init'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc:	Ingo Molnar <mingo@elte.hu>
Cc:	Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-23 08:44:54 -08:00
Randy Dunlap 42ae610c1a kernel-doc: fix new warnings in auditsc.c
Fix new kernel-doc warnings in auditsc.c:

Warning(kernel/auditsc.c:1875): No description found for parameter 'success'
Warning(kernel/auditsc.c:1875): No description found for parameter 'return_code'
Warning(kernel/auditsc.c:1875): Excess function parameter 'pt_regs' description in '__audit_syscall_exit'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-23 08:44:53 -08:00
Ananth N Mavinakayanahalli d496aab567 kprobes: initialize before using a hlist
Commit ef53d9c5e ("kprobes: improve kretprobe scalability with hashed
locking") introduced a bug where we can potentially leak
kretprobe_instances since we initialize a hlist head after having used
it.

Initialize the hlist head before using it.

Reported by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srinivasa D S <srinivasa@in.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-23 08:38:48 -08:00
Glauber Costa 0e90b31f4b net: introduce res_counter_charge_nofail() for socket allocations
There is a case in __sk_mem_schedule(), where an allocation
is beyond the maximum, but yet we are allowed to proceed.
It happens under the following condition:

	sk->sk_wmem_queued + size >= sk->sk_sndbuf

The network code won't revert the allocation in this case,
meaning that at some point later it'll try to do it. Since
this is never communicated to the underlying res_counter
code, there is an inbalance in res_counter uncharge operation.

I see two ways of fixing this:

1) storing the information about those allocations somewhere
   in memcg, and then deducting from that first, before
   we start draining the res_counter,
2) providing a slightly different allocation function for
   the res_counter, that matches the original behavior of
   the network code more closely.

I decided to go for #2 here, believing it to be more elegant,
since #1 would require us to do basically that, but in a more
obscure way.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
CC: Tejun Heo <tj@kernel.org>
CC: Li Zefan <lizf@cn.fujitsu.com>
CC: Laurent Chavey <chavey@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:46 -05:00
Namhyung Kim 46cd6a7f68 perf: Call perf_cgroup_event_time() directly
The perf_event_time() will call perf_cgroup_event_time()
if @event is a cgroup event. Just do it directly and avoid
the extra check..

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/1327021966-27688-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-21 09:33:42 +01:00
Namhyung Kim fd45c15f13 perf: Don't call release_callchain_buffers() if allocation fails
When alloc_callchain_buffers() fails, it frees all of
entries before return. In addition, calling the
release_callchain_buffers() will cause a NULL pointer
dereference since callchain_cpu_entries is not set.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/1327021966-27688-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-21 09:33:41 +01:00
Linus Torvalds 567e47935a Merge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/accounting, proc: Fix /proc/stat interrupts sum

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT
  x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore
  x86/kprobes: Fix typo transferred from Intel manual

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
  x86, tsc: Fix SMI induced variation in quick_pit_calibrate()
  x86, opcode: ANDN and Group 17 in x86-opcode-map.txt
  x86/kconfig: Move the ZONE_DMA entry under a menu
  x86/UV2: Add accounting for BAU strong nacks
  x86/UV2: Ack BAU interrupt earlier
  x86/UV2: Remove stale no-resources test for UV2 BAU
  x86/UV2: Work around BAU bug
  x86/UV2: Fix BAU destination timeout initialization
  x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode
  x86: Get rid of dubious one-bit signed bitfield
2012-01-19 14:53:06 -08:00
Namhyung Kim 160cb5a97d PM / Hibernate: Correct additional pages number calculation
The struct bm_block is allocated by chain_alloc(),
so it'd better counting it in LINKED_PAGE_DATA_SIZE.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-01-19 23:23:10 +01:00
Linus Torvalds f429ee3b80 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit: (29 commits)
  audit: no leading space in audit_log_d_path prefix
  audit: treat s_id as an untrusted string
  audit: fix signedness bug in audit_log_execve_info()
  audit: comparison on interprocess fields
  audit: implement all object interfield comparisons
  audit: allow interfield comparison between gid and ogid
  audit: complex interfield comparison helper
  audit: allow interfield comparison in audit rules
  Kernel: Audit Support For The ARM Platform
  audit: do not call audit_getname on error
  audit: only allow tasks to set their loginuid if it is -1
  audit: remove task argument to audit_set_loginuid
  audit: allow audit matching on inode gid
  audit: allow matching on obj_uid
  audit: remove audit_finish_fork as it can't be called
  audit: reject entry,always rules
  audit: inline audit_free to simplify the look of generic code
  audit: drop audit_set_macxattr as it doesn't do anything
  audit: inline checks for not needing to collect aux records
  audit: drop some potentially inadvisable likely notations
  ...

Use evil merge to fix up grammar mistakes in Kconfig file.

Bad speling and horrible grammar (and copious swearing) is to be
expected, but let's keep it to commit messages and comments, rather than
expose it to users in config help texts or printouts.
2012-01-17 16:41:31 -08:00
Kees Cook c158a35c8a audit: no leading space in audit_log_d_path prefix
audit_log_d_path() injects an additional space before the prefix,
which serves no purpose and doesn't mix well with other audit_log*()
functions that do not sneak extra characters into the log.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:17:04 -05:00
Xi Wang 5afb8a3f96 audit: fix signedness bug in audit_log_execve_info()
In the loop, a size_t "len" is used to hold the return value of
audit_log_single_execve_arg(), which returns -1 on error.  In that
case the error handling (len <= 0) will be bypassed since "len" is
unsigned, and the loop continues with (p += len) being wrapped.
Change the type of "len" to signed int to fix the error handling.

	size_t len;
	...
	for (...) {
		len = audit_log_single_execve_arg(...);
		if (len <= 0)
			break;
		p += len;
	}

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:17:03 -05:00
Peter Moody 10d6836087 audit: comparison on interprocess fields
This allows audit to specify rules in which we compare two fields of a
process.  Such as is the running process uid != to the running process
euid?

Signed-off-by: Peter Moody <pmoody@google.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:17:03 -05:00
Peter Moody 4a6633ed08 audit: implement all object interfield comparisons
This completes the matrix of interfield comparisons between uid/gid
information for the current task and the uid/gid information for inodes.
aka I can audit based on differences between the euid of the process and
the uid of fs objects.

Signed-off-by: Peter Moody <pmoody@google.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:17:02 -05:00
Eric Paris c9fe685f7a audit: allow interfield comparison between gid and ogid
Allow audit rules to compare the gid of the running task to the gid of the
inode in question.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:17:02 -05:00
Eric Paris b34b039324 audit: complex interfield comparison helper
Rather than code the same loop over and over implement a helper function which
uses some pointer magic to make it generic enough to be used numerous places
as we implement more audit interfield comparisons

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:17:02 -05:00
Eric Paris 02d86a568c audit: allow interfield comparison in audit rules
We wish to be able to audit when a uid=500 task accesses a file which is
uid=0.  Or vice versa.  This patch introduces a new audit filter type
AUDIT_FIELD_COMPARE which takes as an 'enum' which indicates which fields
should be compared.  At this point we only define the task->uid vs
inode->uid, but other comparisons can be added.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:17:01 -05:00
Eric Paris 4043cde8ec audit: do not call audit_getname on error
Just a code cleanup really.  We don't need to make a function call just for
it to return on error.  This also makes the VFS function even easier to follow
and removes a conditional on a hot path.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:17:01 -05:00
Eric Paris 633b454545 audit: only allow tasks to set their loginuid if it is -1
At the moment we allow tasks to set their loginuid if they have
CAP_AUDIT_CONTROL.  In reality we want tasks to set the loginuid when they
log in and it be impossible to ever reset.  We had to make it mutable even
after it was once set (with the CAP) because on update and admin might have
to restart sshd.  Now sshd would get his loginuid and the next user which
logged in using ssh would not be able to set his loginuid.

Systemd has changed how userspace works and allowed us to make the kernel
work the way it should.  With systemd users (even admins) are not supposed
to restart services directly.  The system will restart the service for
them.  Thus since systemd is going to loginuid==-1, sshd would get -1, and
sshd would be allowed to set a new loginuid without special permissions.

If an admin in this system were to manually start an sshd he is inserting
himself into the system chain of trust and thus, logically, it's his
loginuid that should be used!  Since we have old systems I make this a
Kconfig option.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:17:00 -05:00
Eric Paris 0a300be6d5 audit: remove task argument to audit_set_loginuid
The function always deals with current.  Don't expose an option
pretending one can use it for something.  You can't.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:17:00 -05:00
Eric Paris 54d3218b31 audit: allow audit matching on inode gid
Much like the ability to filter audit on the uid of an inode collected, we
should be able to filter on the gid of the inode.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:16:59 -05:00
Eric Paris efaffd6e44 audit: allow matching on obj_uid
Allow syscall exit filter matching based on the uid of the owner of an
inode used in a syscall.  aka:

auditctl -a always,exit -S open -F obj_uid=0 -F perm=wa

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:16:59 -05:00
Eric Paris 6422e78de6 audit: remove audit_finish_fork as it can't be called
Audit entry,always rules are not allowed and are automatically changed in
exit,always rules in userspace.  The kernel refuses to load such rules.

Thus a task in the middle of a syscall (and thus in audit_finish_fork())
can only be in one of two states: AUDIT_BUILD_CONTEXT or AUDIT_DISABLED.
Since the current task cannot be in AUDIT_RECORD_CONTEXT we aren't every
going to actually use the code in audit_finish_fork() since it will
return without doing anything.  Thus drop the code.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:16:59 -05:00
Eric Paris 7ff68e53ec audit: reject entry,always rules
We deprecated entry,always rules a long time ago.  Reject those rules as
invalid.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:16:58 -05:00
Eric Paris a4ff8dba7d audit: inline audit_free to simplify the look of generic code
make the conditional a static inline instead of doing it in generic code.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:16:58 -05:00
Eric Paris 07c4941787 audit: inline checks for not needing to collect aux records
A number of audit hooks make function calls before they determine that
auxilary records do not need to be collected.  Do those checks as static
inlines since the most common case is going to be that records are not
needed and we can skip the function call overhead.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:16:57 -05:00
Eric Paris 56179a6ec6 audit: drop some potentially inadvisable likely notations
The audit code makes heavy use of likely() and unlikely() macros, but they
don't always make sense.  Drop any that seem questionable and let the
computer do it's thing.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:16:57 -05:00