Commit Graph

4831 Commits

Author SHA1 Message Date
Al Viro 1e4f2a96ae [PATCH] iomem annotations (ahci)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 02:05:31 -04:00
Al Viro 9ee0c0a2cc [PATCH] iomem annotations (sata_nv)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 02:05:31 -04:00
Ralf Baechle 59b8182707 [PATCH] sb1250-mac: PHY probing fixes.
Improve sb1250-mac driver to probe for PHYs at addresses other
than 1, such as the PHYs on BigSur.

Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-20 16:06:11 -04:00
Brett Russ 7e6c120859 [PATCH] libata: Marvell endian fix
Jeff found an endian bug in the Marvell driver (thanks!).  Here's the
fix for it.

Signed-off-by: Brett Russ <russb@emc.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-20 16:04:22 -04:00
Roland Dreier bbf2078609 [IB] user_mad: Use class_device.devt
Use devt member of struct class_device so that we don't have to create
our own "dev" file in sysfs.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-20 12:54:01 -07:00
Roland Dreier 2e0c512aff [IB] user_mad: trivial coding style fixes
Add spaces after "sizeof" operator to match the rest of file.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-20 12:30:16 -07:00
Roland Dreier 3910f44d79 [IB] cm: Add missing break in switch
Add missing "break" in switch statement.  Without the break, the
CM ended up always falling through and setting every connection
request to use RC transport, which meant that UC connections
didn't work.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-20 12:29:36 -07:00
Jeff Garzik 323cb3ce6e Merge branch 'master' 2005-10-20 10:11:25 -04:00
Jeff Garzik 902f90735b Merge branch 'master' 2005-10-20 10:06:09 -04:00
Mallikarjuna R Chilakala 07b8fede6d [PATCH] e1000: Driver version, white space, comments, device id & other
Driver version, white space, comments, device id & other

Originally posted on 8/31 (and perhaps before)...I think it has not
been committed because the patch from that posting was damaged.  I'm
reposting to make sure it gets in... :-)

Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-20 10:05:36 -04:00
John W. Linville b06c093ed2 [PATCH] sundance: include MII address 0 in PHY probe
Include MII address 0 at the end of the PHY scan.  This covers the
entire range of possible MII addresses.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-20 10:05:36 -04:00
Steven Rostedt 461a0ffbec [PATCH] scsi_error thread exits in TASK_INTERRUPTIBLE state.
Found in the -rt patch set.  The scsi_error thread likely will be in the
TASK_INTERRUPTIBLE state upon exit.  This patch fixes this bug.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-19 23:16:21 -07:00
Peter Chubb 51b190b304 [PATCH] `unaligned access' in acpi get_root_bridge_busnr()
In drivers/acpi/glue.c the address of an integer is cast to the address of
an unsigned long.  This breaks on systems where a long is larger than an
int --- for a start the int can be misaligned; for a second the assignment
through the pointer will overwrite part of the next variable.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Acked-by: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-19 23:04:31 -07:00
Dave Airlie 11909d6438 [PATCH] fix MGA DRM regression before 2.6.14
I've gotten a report on lkml, of a possible regression in the MGA DRM in
2.6.14-rc4 (since -rc1), I haven't been able to reproduce it here, but I've
figured out some possible issues in the mga code that were definitely
wrong, some of these are from DRM CVS, the main fix is the agp enable bit
on the old code path still used by everyone.....

Signed-off-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-19 23:04:31 -07:00
NeilBrown 6985c43f39 [PATCH] Three one-liners in md.c
The main problem fixes is that in certain situations stopping md arrays may
take longer than you expect, or may require multiple attempts.  This would
only happen when resync/recovery is happening.

This patch fixes three vaguely related bugs.

1/ The recent change to use kthreads got the setting of the
   process name wrong.  This fixes it.
2/ The recent change to use kthreads lost the ability for
   md threads to be signalled with SIG_KILL.  This restores that.
3/ There is a long standing bug in that if:
    - An array needs recovery (onto a hot-spare) and
    - The recovery is being blocked because some other array being
       recovered shares a physical device and
    - The recovery thread is killed with SIG_KILL
   Then the recovery will appear to have completed with no IO being
   done, which can cause data corruption.
   This patch makes sure that incomplete recovery will be treated as
   incomplete.

Note that any kernel affected by bug 2 will not suffer the problem of bug
3, as the signal can never be delivered.  Thus the current 2.6.14-rc
kernels are not susceptible to data corruption.  Note also that if arrays
are shutdown (with "mdadm -S" or "raidstop") then the problem doesn't
occur.  It only happens if a SIGKILL is independently delivered as done by
'init' when shutting down.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-19 23:04:30 -07:00
Andy Wingo 4a9949d7ac [PATCH] raw1394: fix locking in the presence of SMP and interrupts
Changes all spinlocks that can be held during an irq handler to disable
interrupts while the lock is held.  Changes spin_[un]lock_irq to use the
irqsave/irqrestore variants for robustness and readability.

In raw1394.c:handle_iso_listen(), don't grab host_info_lock at all -- we're
not accessing host_info_list or host_count, and holding this lock while
trying to tasklet_kill the iso tasklet this can cause an ABBA deadlock if
ohci:dma_rcv_tasklet is running and tries to grab host_info_lock in
raw1394.c:receive_iso.  Test program attached reliably deadlocks all SMP
machines I have been able to test without this patch.

Signed-off-by: Andy Wingo <wingo@pobox.com>
Acked-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-19 23:04:30 -07:00
Andrew Morton c367c21c93 [PATCH] orinoco: limit message rate
Brice Goglin <Brice.Goglin@ens-lyon.org> reports a printk storm from this
driver.  Fix.

Acked-by: David Gibson <hermes@gibson.dropbear.id.au>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-19 23:04:30 -07:00
Ralf Baechle 74b0247fbd [PATCH] sb1250-mac: Whitespace cleanup.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/sb1250-mac.c | 1030 +++++++++++++++++++++++------------------------
 1 files changed, 515 insertions(+), 515 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-19 22:14:20 -04:00
Ralf Baechle 2039973af5 [PATCH] sb1250-mac: Get rid of all the funny SBMAC_WRITECSR and SBMAC_READCSR macros.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/sb1250-mac.c |  303 ++++++++++++++++++++---------------------------
 1 files changed, 132 insertions(+), 171 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-19 22:14:20 -04:00
Ralf Baechle ab7a435a01 [PATCH] Remove unused header.
mkiss.h has been integrated into mkiss.c earlier.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>

 drivers/net/hamradio/mkiss.h |   62 -------------------------------------------
 1 files changed, 62 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-19 22:14:20 -04:00
Steven Rostedt 055787e447 [SCSI] scsi_error thread exits in TASK_INTERRUPTIBLE state.
Found in the -rt patch set.  The scsi_error thread likely will be in the
TASK_INTERRUPTIBLE state upon exit.  This patch fixes this bug.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 09:53:59 -04:00
Andrew Morton c4cfe567b9 [PATCH] e1000 build fix
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 23:57:26 -04:00
John W. Linville 2aa1d82db7 [PATCH] sundance: expand reset mask
Expand the mask used when reseting the chip to include the GlobalReset
bit.  This fix comes from ICPlus and seems to be required for some
cards.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 22:29:14 -04:00
John W. Linville 67ec2f805a [PATCH] sundance: remove if (1) { ... } block in sundance_probe1
Remove an if (1) { ... } block in sundance_probe1.  Its purpose seems
to be only to allow for delaring some extra local variables.  But, it also
adds ugly indentation without adding any meaning to the code.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 22:29:14 -04:00
John W. Linville 36841c9d02 [PATCH] orinoco: remove redundance skb length check before padding
Checking the skb->len value before calling skb_padto is redundant.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 22:27:14 -04:00
John W. Linville 9f38c636ab [PATCH] b44: alternate allocation option for DMA descriptors
This is a (final?) hack to support the odd DMA allocation requirements
of the b44 hardware.  The b44 hardware has a 30-bit DMA mask.  On x86,
anything less than a 32-bit DMA mask forces allocations into the 16MB
GFP_DMA range.  The memory there is somewhat limited, often resulting
in an inability to initialize the b44 driver.

This hack uses streaming DMA allocation APIs in order to provide an
alternative in case the GFP_DMA allocation fails.  It is somewhat ugly,
but not much worse than the similar existing hacks to support SKB
allocations in the same driver.  FWIW, I have received positive
feedback on this from several Fedora users.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 22:27:13 -04:00
John W. Linville df49898a47 [PATCH] bonding: cleanup comment for mode 1 IGMP xmit hack
Expand comment explaining MAC address selection for replicated IGMP
frames transmitted in bonding mode 1 (active-backup).  Also, a small
whitespace cleanup.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 22:27:13 -04:00
John W. Linville 7645baec58 [PATCH] 8139too: fix resume for Realtek 8100B/8139D
Add "HasHltClk" flag for RTL-8100B/8139D hardware in order to fix
problems resuming from suspend-to-RAM.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 22:26:01 -04:00
John W. Linville b7b1d20214 [PATCH] epic100: fix counting of work_done in epic_poll
work_done is overwritten each time through the rx_action loop in
epic_poll.  This screws-up the NAPI accounting if the loop is executed
more than once.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 22:26:01 -04:00
John W. Linville 6ba98d311d [PATCH] via-rhine: change mdelay to msleep and remove from ISR path
Get rid of the mdelay call in rhine_disable_linkmon.  The function
is called from the via-rhine versions of mdio_read and mdio_write.
Those functions are indirectly called from rhine_check_media and
rhine_tx_timeout, both of which can be called in interrupt context.

So, create tx_timeout_task and check_media_task as instances of struct
work_struct inside of rhine_private.  Then, change rhine_tx_timeout to
invoke schedule_work for tx_timeout_task (i.e. rhine_tx_timeout_task),
moving the work to process context.  Also, change rhine_error (invoked
from rhine_interrupt) to invoke schedule_work for check_media_task
(i.e. rhine_check_media_task), which simply calls rhine_check media
in process context.  Finally, add a call to flush_scheduled_work in
rhine_close to avoid any resource conflicts with pending work items.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 22:26:01 -04:00
Andrew Morton 923833405d [PATCH] s2io build fix
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:33:42 -04:00
Andrew Morton 166d823d39 [PATCH] e1000_intr build fix
drivers/net/e1000/e1000_main.c: In function `e1000_intr':
drivers/net/e1000/e1000_main.c:3156: error: `i' undeclared (first use in this function)
drivers/net/e1000/e1000_main.c:3156: error: (Each undeclared identifier is reported only once
drivers/net/e1000/e1000_main.c:3156: error: for each function it appears in.)

This function is foul.

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:32:34 -04:00
Ralf Baechle dcbf847756 [PATCH] mipsnet: Virtual ethernet driver for MIPSsim.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/Kconfig   |    8 +
 drivers/net/Makefile  |    1
 drivers/net/mipsnet.c |  371 ++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/mipsnet.h |  127 +++++++++++++++++
 4 files changed, 507 insertions(+)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:03:48 -04:00
Ralf Baechle 9cc975e00d [PATCH] ne: Support for RBHMA4500 eval board.
Support for Toshiba's RBHMA4500 eval board for the TX4938.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/ne.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:03:48 -04:00
Ralf Baechle 36156cdff1 [PATCH] declance: Use physical addresses at the interface level.
Use physical addresses at the interface level, letting drivers remap
them as appropriate.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/declance.c |   26 ++++++++++----------------
 1 files changed, 10 insertions(+), 16 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:03:48 -04:00
Ralf Baechle 4569504a36 [PATCH] declance: Deal with the bloody KSEG vs CKSEG horror...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/declance.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:03:48 -04:00
Ralf Baechle 6684b4e282 [PATCH] declance: Fix mapping of device.
These should really be addresses obtained with ioremap() or some
bus-specific backend, but for now...

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/declance.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:03:48 -04:00
Ralf Baechle da848ec37d [PATCH] declance: Convert to irqreturn_t.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/declance.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:03:47 -04:00
Ralf Baechle 302a5c4b3d [PATCH] sgiseeq: Configure PIO and DMA timing requests.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/sgiseeq.c       |   28 ++++++++++++++--------------
 include/asm-mips/sgi/hpc3.h |   40 ++++++++++++++++++++--------------------
 2 files changed, 34 insertions(+), 34 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:03:47 -04:00
Ralf Baechle 2891439e73 [PATCH] sgiseeq: Fix resource handling.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/sgiseeq.c |    9 ++++-----
 1 files changed, 4 insertions(+), 5 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:03:47 -04:00
Ralf Baechle bc053d45cb [PATCH] de2104x: Resurrect Cobalt support for 2.6.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/tulip/de2104x.c |    5 +++++
 1 files changed, 5 insertions(+)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:03:47 -04:00
Ralf Baechle 7f553e3db4 [PATCH] au1000_eth: Misc Au1000 net driver fixes.
o Add support for DP83847 MII.
 o remove unused variable.
 o Add some initialisations so even an unknown MII won't result in a crash.
 o Correct error message to "no known MIIs found".

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/au1000_eth.c |   13 +++++--------
 1 files changed, 5 insertions(+), 8 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:03:47 -04:00
Ralf Baechle 04115def6a [PATCH] sb1250-mac: Ensure 16-byte alignment of the descriptor ring.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/sb1250-mac.c |    9 ++++++++-
 1 files changed, 8 insertions(+), 1 deletion(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:03:47 -04:00
Ralf Baechle f567ef9350 [PATCH] sb1250-mac: Check the actual setting for reporting hw checksumming.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/sb1250-mac.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:03:47 -04:00
Jack Morgenstein 7150bf8a98 [IB] mthca: Don't enter QP into MCG more than once.
Avoid entering a QP as member of a multicast group multiple times.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-18 14:46:38 -07:00
Albert Lee 59a10b172f [PATCH] libata CHS: reread device identify info (revise #6)
problem:
      id[53-58] might be changed after initializing device CHS settings.

changes:
    - call ata_dev_reread_id() to reread the identify device info,
      after initializing device CHS settings.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 17:16:14 -04:00
Albert Lee 8cbd6df1f0 [PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6)
- merge ata_prot_to_cmd() and ata_dev_set_protocol() as
       ata_rwcmd_protocol()
     - pave road for read/write multiple support
     - remove usage of pre-cached command and protocol values and call
       ata_rwcmd_protocol() instead

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

==============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 17:16:13 -04:00
Albert Lee 07506697d1 [PATCH] libata CHS: move the initialization of taskfile LBA flags (revise #6)
move the initialization of taskfile LBA flags
     "ATA_TFLAG_LBA" and "ATA_TFLAG_LBA48 flags"
   to the SCSI translation functions

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

=============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 17:16:13 -04:00
Jeff Garzik 5a476deff3 Merge branch 'master' 2005-10-18 17:16:06 -04:00
Roland Dreier ba8e931024 [IB] Fail sysfs queries after device is unregistered
We keep IB device structures around until the last sysfs reference is
gone, but we shouldn't ask the low-level driver to do anything after
the LLD unregisters the device.  To handle this, check the reg_state
field and just fail sysfs show() requests if the device has already
been unregistered.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-18 14:14:56 -07:00
Jeff Garzik 28af493cd7 Merge branch 'master' 2005-10-18 17:14:17 -04:00
Roland Dreier d476306f1c [IB] mthca: Add struct pci_driver.owner field
Set mthca_driver.owner to THIS_MODULE.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-18 14:07:07 -07:00
Ralf Baechle 74cfe03f80 [PATCH] Initialize the .owner field the tty_ldisc structure.
If .owner isn't set the module can be unloaded even while still active.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 17:03:28 -04:00
Ralf Baechle 5793f4be23 [PATCH] SMACK support for mkiss
SMACK (Stuttgart Modified Amateurradio CRC KISS) is a KISS variant that
uses CRC16 checksums to secure data transfers between the modem and host.
It's also used to communicate over a pty to applications such as Wampes.

Patches for Linux 2.4 by Thomas Osterried DL9SAU, upgraded to the latest
mkiss 2.6 mkiss driver by me.

Signed-off-by: Thomas Osterried DL9SAU <thomas@x-berg.in-berlin.de>
Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 17:02:14 -04:00
Ralf Baechle bc0a743860 [PATCH] rcu in bpqether driver.
From Suzanne Wood <suzannew@cs.pdx.edu>:

Clarify RCU implementation in bpqether.c.

Because bpq_new_device() calls list_add_rcu() and bpq_free_device() calls
list_del_rcu(), substitute list_for_each_entry_rcu() for
list_for_each_entry() in bpq_get_ax25_dev() and in bpq_seq_start().

Add rcu dereference protection in bpq_seq_next().

The rcu_read_lock()/unlock() in bpq_device_event() are removed because
netdev event handlers are called with RTNL locking in place.

FYI: bpq_free_device() calls list_del_rcu() which, per list.h, requires
synchronize_rcu() which can block or call_rcu() or call_rcu_bh() which
cannot block.  Herbert Xu notes that synchronization is done here by
unregister_netdevice().  This calls synchronize_net() which in turn uses
synchronize_rcu().

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 17:01:27 -04:00
ravinandan.arakali@neterion.com ad4ebed00f [PATCH] S2io: Offline diagnostics fixes
This patch fixes the following bugs with offline diagnostics
code(run with "ethtool -t").

1. After running offline diagnostics, adapter would report
corrupted packets on receive. This was because of adapter not
being brought out of "RLDRAM test mode".
2. Current EEPROM test works only for Xframe I. Since Xframe II
uses different interface(SPI), support for this interface has
been added. Also, since SPI supports write access to all areas
of EEPROM, negative testing is done only for Xframe I.
3. Return values from subfunctions of offline diagnostics have
been corrected.
4. In register test, expected value from rx_queue_cfg register
is made to depend on adapter type.
5. After the test, need to restore values at EEPROM offsets
0x4F0 and 0x7F0. These locations were modified as part of test.
6. Use macro SPECIAL_REG_WRITE for write access to mc_rldram_test_ctrl
register. Also, couple of unnecessary writes to mc_rldram_test_ctrl
have been removed.

Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 16:58:27 -04:00
Roland Dreier c6f5cb7be0 [IB] mthca: Use enum in mthca_alloc_db() prototype
Make the type parameter of mthca_alloc_db() be an enum mthca_db_type
instead of an int.  This doesn't have any practical effect but
documents the functions a little better.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-18 13:22:16 -07:00
Roland Dreier 4b2d319b53 [IPoIB] Improve ipoib_timeout() output
Use jiffies_to_msecs() so we print a human-readable time so
we don't have to worry about what HZ is configured to, and
print out a few values to make post-mortem analysis easier.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-18 12:20:06 -07:00
Antonino A. Daplas bb7e257ef8 [PATCH] vesafb: Fix display corruption on display blank
Reported by: Bob Tracy <rct@gherkin.frus.com>

 "...I've got a Toshiba notebook (730XCDT -- Pentium 150MMX) for which
  I'm using the Vesa FB driver.  When the machine has been idle for some
  time and the driver attempts to powerdown the display, rather than the
  display going blank, it goes gray with several strange lines.  When I
  hit the "shift" key or other-wise wake up the display, the old video
  state is not fully restored..."

vesafb recently added a blank method which has only 2 states, powerup and
powerdown.  The powerdown state is used for all blanking levels, but in his
case, powerdown does not work correctly for higher levels of display
powersaving. Thus, for intermediate power levels, use software blanking,
and use only hardware blanking for an explicit powerdown.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-18 08:43:29 -07:00
Linus Torvalds ace7c76937 Merge master.kernel.org:/home/rmk/linux-2.6-serial 2005-10-18 08:40:46 -07:00
Linus Torvalds 1e65174a33 Add some basic .gitignore files
This still leaves driver and architecture-specific subdirectories alone,
but gets rid of the bulk of the "generic" generated files that we should
ignore.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-18 08:26:15 -07:00
Dmitry Torokhov e7507ed91e [PATCH] uniput - fix crash on SMP
Only signal completion after marking request slot as free, otherwise other
processor can free request structure before we finish using it.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17 17:03:57 -07:00
Pavel Machek 5cc9eeef9a [PATCH] Fix /proc/acpi/events around suspend
Fix -EIO on /proc/acpi/events after suspends.  This actually breaks
suspending by power button in many setups.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17 17:03:57 -07:00
Stephan Brodkorb 9ac0b9c192 [PATCH] n_r3964 mod_timer() fix
Since Revision 1.10 was released the n_r3964 module wasn't able to receive any
data.  The reason for that behavior is because there were some wrong calls of
mod_timer(...) in the function receive_char (...).  This patch should fix this
problem and was successfully tested with talking to some kuka industrial
robots.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17 17:03:57 -07:00
Roland Dreier 762a03e21e [IB] ucm: quiet sparse warnings
Make ctx_id_mutex and ctx_id_table static to quiet sparse warnings.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:38:50 -07:00
Sean Hefty 07d357d0cb [IB] CM: bind IDs to a specific device
Bind communication identifiers to a device to support device removal.
Export per HCA CM devices to userspace.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2005-10-17 15:37:43 -07:00
Sean Hefty 595e726a1f [IB] merge ucm.h into ucm.c
Eliminate ucm.h.  Replace ucm_dbg with direct call to printk KERN_ERR.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2005-10-17 15:33:47 -07:00
Roland Dreier 67cdb40ca4 [IB] uverbs: Implement more commands
Add kernel support for userspace calling poll CQ, request CQ
notification, post send, post receive, post SRQ receive, create AH and
destroy AH commands.  These commands allow us to support userspace
verbs for devices that can't perform these operations directly from
userspace (eg the PathScale HCA).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:31 -07:00
Roland Dreier 883a99c702 [IB] uverbs: Add a mask of device methods allowed for userspace
Give each device a uverbs_cmd_mask, so that a low-level driver can
control which methods may be called on behalf of userspace.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:30 -07:00
Roland Dreier 56c202d6e4 [IB] fail SA queries if device initialization failed
If the SA query module's initialization fails for a device, then that
device won't have a struct ib_sa_device associated.  We should fail SA
queries in that case, rather than blindly dereferencing the NULL
pointer we get back from ib_get_client_data().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:29 -07:00
Roland Dreier 305a7e8705 [IB] uverbs: unlock correctly in error paths
A couple of functions were missing spin_unlock calls in error paths.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:29 -07:00
Roland Dreier 5b6810e048 [IPoIB] Rename ipoib_create_qp() -> ipoib_init_qp() and fix error cleanup
ipoib_create_qp() no longer creates IPoIB's QP, so it shouldn't
destroy the QP on failure -- that unwinding happens elsewhere, so the
current code can cause a double free.  While we're at it, the
function's name should match what it actually does, so rename it to
ipoib_init_qp().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:29 -07:00
Jack Morgenstein efaae8f71f [IB] mthca: Better limit checking and reporting
Check the sizes of CQs, QPs and SRQs when creating objects, and fail
instead of creating too-big queues.  Also return real limits instead
of just plausible-sounding values from mthca_query_device().

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:29 -07:00
Roland Dreier 4ab6fb7e5b [IB] Fix leak on MAD initialization failure
There is a bug in ib_mad_init_device(): if ib_agent_port_open() fails
for a given port, then the current code doesn't call ib_mad_port_close()
for that port.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:28 -07:00
Roland Dreier e23d6d2b09 [IB] mthca: detect SRQ overflow
The hardware relies on us keeping one extra work request that never
gets used in SRQs.  Add checks to the SRQ work request posting
functions so that they fail when someone is about to use up that extra
work request, rather than when someone uses the very last work request.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:28 -07:00
Roland Dreier 90f104da22 [IB] mthca: SRQ limit reached events
Our hardware supports generating an event when the number of receives
posted to a shared receive queue (SRQ) falls below a user-specified
limit.  Implement mthca_modify_srq() to arm the limit, and add code to
handle dispatching SRQ events when they occur.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:28 -07:00
Roland Dreier 116c0074ec [IB] Check port number in ib_query_port()/ib_modify_port()
Check port number before passing query_port or modify_port operations
on to device driver.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:27 -07:00
Roland Dreier f575394f1d [IB] uverbs: reject invalid memory registration permission flags
Reject userspace memory registrations with invalid permission flags:
"local write" is required if "remote write" or "remote atomic" is also
requested.

Pointed out by Jack Morgenstein <jackm@mellanox.co.il>

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:27 -07:00
Jack Morgenstein 9825051e8c [IB] mthca: Fill in more fields in query_port method
Add code to fill in the bad_pkey_cntr, max_mtu, active_mtu and
subnet_timeout fields in mthca_query_port().

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:26 -07:00
Roland Dreier 274c089163 [IB] uverbs: Add device-specific ABI version attribute
Add abi_version attribute to uverbs class devices to allow for
ABI versioning of device-specific interfaces.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:26 -07:00
Roland Dreier eb9d3cd5ce [IB] uverbs: Fix up resource creation error paths
By waiting to add resources to our lists until after the last
operation that can fail, we don't have to remove them from their lists
in the error path.  Also, we should hold the idr mutex until we know
whether resource creation has succeed or failed, to avoid someone
finding a resource in our table before we're ready.

Loosely based on work by Robert Walsh <rjwalsh@pathscale.com>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:25 -07:00
Roland Dreier 6b73597e70 [IB] uverbs: ABI-breaking fixes for userspace verbs
Introduce new userspace verbs ABI version 3.  This eliminates some
unneeded commands, and adds support for user-created completion
channels.  This cleans up problems with file leaks on error paths, and
also makes sure that file descriptors are always installed into the
correct process.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:25 -07:00
Jack Morgenstein 33033b7972 [IB] mthca: Report correct atomic capability
Return correct atomic capability flag from mthca query function.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:24 -07:00
Jack Morgenstein 0c33aeedb2 [IB] Add checks to multicast attach and detach
Add checks so that we only allow multicast attach/detach with
a valid multicast GID and the correct QP type.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17 15:20:24 -07:00
Jeff Garzik cc675230a9 [PATCH] Fix and clean up quirk_intel_ide_combined() configuration
This change makes quirk_intel_ide_combined() dependent on the precise
conditions under which it is needed:

* IDE is built in
* IDE SATA option is not set
* ata_piix or ahci drivers are enabled

This fixes an issue where some modular configurations would not cause
the quirk to be enabled.

Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Linus torvalds <torvalds@osdl.org>
2005-10-17 15:01:53 -07:00
Christian Krause 13b58ee518 [PATCH] USB: fix bug in handling of highspeed usb HID devices
During the development of an USB device I found a bug in the handling of
Highspeed HID devices in the kernel.

What happened?

Highspeed HID devices are correctly recognized and enumerated by the
kernel. But even if usbhid kernel module is loaded, no HID reports are
received by the kernel.

The output of the hardware USB analyzer told me that the host doesn't
even poll for interrupt IN transfers (even the "interrupt in" USB
transfer are polled by the host).

After some debugging in hid-core.c I've found the reason.

In case of a highspeed device, the endpoint interval is re-calculated in
driver/usb/input/hid-core.c:

line 1669:
             /* handle potential highspeed HID correctly */
             interval = endpoint->bInterval;
             if (dev->speed == USB_SPEED_HIGH)
                   interval = 1 << (interval - 1);

Basically this calculation is correct (refer to USB 2.0 spec, 9.6.6).
This new calculated value of "interval" is used as input for
usb_fill_int_urb:

line 1685:

            usb_fill_int_urb(hid->urbin, dev, pipe, hid->inbuf, 0,
                   hid_irq_in, hid, interval);

Unfortunately the same calculation as above is done a second time in
usb_fill_int_urb in the file include/linux/usb.h:

line 933:
        if (dev->speed == USB_SPEED_HIGH)
                urb->interval = 1 << (interval - 1);
        else
                urb->interval = interval;

This means, that if the endpoint descriptor (of a high speed device)
specifies e.g. bInterval = 7, the urb->interval gets the value:

hid-core.c: interval = 1 << (7-1) = 0x40 = 64
urb->interval = 1 << (interval -1) = 1 << (63) = integer overflow

Because of this the value of urb->interval is sometimes negative and is
rejected in core/urb.c:
line 353:
                /* too small? */
                if (urb->interval <= 0)
                        return -EINVAL;

The conclusion is, that the recalculaton of the interval (which is
necessary for highspeed) should not be made twice, because this is
simply wrong. ;-)

Re-calculation in usb_fill_int_urb makes more sense, because it is the
most general approach. So it would make sense to remove it from
hid-core.c.

Because in hid-core.c the interval variable is only used for calling
usb_fill_int_urb, it is no problem to remove the highspeed
re-calculation in this file.

Signed-off-by: Christian Krause <chkr@plauener.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17 14:45:49 -07:00
Olav Kongas e9b765decf [PATCH] isp116x-hcd: fix handling of short transfers
Increased use of scatter-gather by usb-storage driver after 2.6.13 has
exposed a buggy codepath in isp116x-hcd, which was probably never
visited before: bug happened only for those urbs, for which
URB_SHORT_NOT_OK was set AND short transfer occurred.

The fix attached was tested in 2 ways: (a) it fixed failing
initialization of a flash drive with an embedded hub; (b) the fix was
tested with 'usbtest' against a modified g_zero driver (on top of
net2280), which generated short bulk IN transfers of various lengths
including multiples and non-multiples of max_packet_length.

Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17 14:45:49 -07:00
Christoph Hellwig 16192896ea [SCSI] mptsas: fix phy identifiers
This patch from Eric fixes handling of the phy identifiers in mptsas.
I've split it up from his bigger patch as it should go into 2.6.14
still.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-17 12:27:58 -04:00
Karl Magnus Kolstoe f4fd20bf31 [SCSI] 2.6.13.3; add Pioneer DRM-624x to drivers/scsi/scsi_devinfo.c
The patch below should make the Pioneer DRM-624X automatically
be set up with all 6 "drives". (6 slot SCSI CD changer)

Signed-off-by: Karl Magnus Kolst <karl.kolsto@uib.no>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-17 12:24:04 -04:00
Ronald S. Bultje de21eb63ad [PATCH] fix black/white-only svideo input in vpx3220 decoder
Fix the fact that the svideo input will only give input in black/white in
some circumstances.  Reason is that in the PCI controller driver (zr36067),
after setting input, we reset norm, which overwrites the input register
with the default.  This patch makes it always set the correct value for the
input when changing norm.

Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17 08:59:10 -07:00
Ronald S. Bultje 9b3acc21d7 [PATCH] fix vpx3220 offset issue in SECAM
Fix bug #5404 in kernel bugzilla.

It basically updates the vpx3220 initialization tables with some newer
values that we've had in CVS for a while (and that, for some reason, never
ended up in the kernel...  must've gotten lost).  Those fix a ~16 pixels
noise at the top of the picture in at least SECAM, although (now that I
think about it) PAL was probably affected, also.

Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17 08:59:10 -07:00
Samuel Thibault 0aec4867dc [PATCH] SVGATextMode fix
Fix bug 5441.

I didn't know about messy programs like svgatextmode...  Couldn't this be
integrated in some linux/drivers/video/console/svgacon.c ?...  So because
of the existence of the svgatextmode program, the kernel is not supposed to
touch to CRT_OVERFLOW/SYNC_END/DISP/DISP_END/OFFSET ?

Disabling the check in vgacon_resize() might help indeed, but I'm really
not sure whether it will work for any chipset: in my patch, CRT registers
are set at each console switch, since stty rows/cols apply to consoles
separately...

The attached solution is to keep the test, but if it fails, we assume that
the caller knows what it does (i.e.  it is svgatextmode) and then disable
any further call to vgacon_doresize.  Svgatextmode is usually used to
_expand_ the display, not to shrink it.  And it is harmless in the case of
a too big stty rows/cols: the display will just be cropped.  I tested it on
my laptop, and it works fine with svgatextmode.

A better solution would be that svgatextmode explicitely tells the kernel
not to care about video timing, but for this an interface needs be defined
and svgatextmode be patched.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17 08:59:10 -07:00
Alan Stern 7c72ce8187 [SCSI] Fix leak of Scsi_Cmnds
When a request is deferred in scsi_init_io because the sg table could not
be allocated, the associated scsi_cmnd is not released and the request is
not marked with REQ_DONTPREP.  When the command is retried, if
scsi_prep_fn decides to kill it then the scsi_cmnd will never be released.

This patch (as573) changes scsi_init_io so that it calls scsi_put_command
before deferring a request.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-16 15:35:11 -05:00
James.Smart@Emulex.Com d16794f6ac [SCSI] FW: [PATCH] for Deadlock in transport_fc
Cannot call fc_rport_terminate() under the host lock, so drop the
lock.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-16 12:04:22 -05:00
Salyzyn, Mark 7a9366e46c [SCSI] Fix aacraid regression
Juan was kind enough to linger on site, and work on a production
machine, to try the parameter to make the system stable. He discovered
that reducing the maximum transfer size issued to the adapter to 128KB
stabilized his system. This is related to an earlier change for the
2.6.13 tree resulting from Martin Drab's testing where the transfer size
was reduced from 4G to 256KB; we needed to go still further in scaling
back the request size.

Here is the patch that tames this regression.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-16 12:00:36 -05:00
Randy Dunlap f566a576bc [SCSI] NCR5380: fix undefined preprocessor identifier
Fix 12 undefined preprocessor identifier warnings (4 each in 3 driver builds):
drivers/scsi/NCR5380.c:2744:16: warning: undefined preprocessor identifier 'NDEBUG_ABORT'
drivers/scsi/NCR5380.c:2744:16: warning: "NDEBUG_ABORT" is not defined

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-16 11:50:21 -05:00
maximilian attems c1542cbc50 [SERIAL] Add SupraExpress 56i support
The modem is said to work with belows addition to pnp_dev_table[]:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=296011

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-15 10:43:35 +01:00
Randall Nortman 7a3ca7d2b5 [PATCH] usbserial: Regression in USB generic serial driver
Kernel version 2.6.13 introduced a regression in the generic USB
serial converter driver (usbserial.o, drivers/usb/serial/generic.c).
The bug manifests, as far as I can tell, whenever you attempt to write
to the device -- the write will never complete (write() returns 0, or
blocks).

Signed-off-by: Randall Nortman <oss@wonderclown.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14 18:13:31 -07:00
Linus Torvalds f8cc5756de Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-10-14 17:17:04 -07:00
Linus Torvalds bf7c7decb9 Merge master.kernel.org:/home/rmk/linux-2.6-serial 2005-10-14 17:16:55 -07:00
Linus Torvalds 9e04099cb9 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-10-14 17:16:35 -07:00
Yoshinori Sato d656901bca [PATCH] sh-sci.c sci_start_tx error
Argument does not agree.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14 17:10:13 -07:00
Evgeniy Polyakov 2d1f87a728 [PATCH] Dallas's 1-wire bus compile error
drivers/built-in.o: In function `w1_alloc_dev': undefined reference to `netlink_kernel_create'
drivers/built-in.o: In function `w1_alloc_dev': undefined reference to `sock_release'

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14 17:10:13 -07:00
Mark Haverkamp 0e7734d3ca [PATCH] aacraid: host_lock not released fix
While doing some testing of error cases I ran into this bug.  In some cases
the reset handler can exit with the host_lock still held.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14 17:10:13 -07:00
Matteo Croce 6593b58cfb [PATCH] wireless/airo: Build fix
The aironet PCI driver has a build dependency on ISA that prevent the
driver to compile on systems that doesn't support ISA, like x86_64.  The
driver really doesn't depend on ISA, it does some ISA stuff in the
initialization code, since the driver supports both ISA and PCI cards.  So
the driver should depend on ISA_DMA_API to build on all systems, and this
will not hurt PCI at all.

Signed-off-by: Matteo Croce <3297627799@wind.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14 17:10:12 -07:00
Alexey Dobriyan f1ac046d7b [PATCH] radio-cadet: check request_region() return value correctly
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14 17:10:12 -07:00
Pavel Machek 65d406ace3 [PATCH] zaurus: fix dependencies on collie keyboard
This fixes depenencies of collie keyboard.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14 17:10:12 -07:00
Pavel Machek 4846d0172d [PATCH] zaurus: fix soc_common.c
This fixes wrong comments, non-working debug subsystem, and some
potentially dangerous macros.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14 17:10:12 -07:00
Pavel Machek 6edb7467be [PATCH] zaurus: fix compilation with cpufreq disabled
This fixes compilation with CPU_FREQ disabled.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14 17:10:12 -07:00
David S. Miller f75884d28a [QLOGICPTI]: Handle INQUIRY response sniffing correctly.
These days, in 2.6.x, even INQUIRY commands are sent using
scatter gather lists.

Bug reported by Tom 'spot' Callaway.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-14 13:44:32 -07:00
Richard Purdie 414894938b [ARM] 3014/1: Spitz keyboard: Correct the right shift key
Patch from Richard Purdie

Correct the right shift key entry in the spitz keyboard driver.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14 16:07:28 +01:00
Baris Cicek 04f03bf7db [SERIAL] Add SupraExpress 336i Sp ASVD modem ID
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14 14:32:40 +01:00
Jeff Garzik dd4efa44eb Merge branch 'master' 2005-10-13 21:23:44 -04:00
Jeff Garzik 59aee3c2a1 Merge branch 'master' 2005-10-13 21:22:27 -04:00
Linus Torvalds 3384a04ed4 Merge branch 'release' of master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6 2005-10-13 16:10:54 -07:00
Linus Torvalds c931488cc4 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-10-13 09:59:32 -07:00
Linus Torvalds 1b66e9fe85 Merge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev 2005-10-12 19:07:38 -07:00
Linus Torvalds 67d2b48e20 Merge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 2005-10-12 19:07:19 -07:00
Lothar Wassmann e6158b4a56 [ARM] 3002/1: Wrong parameter to uart_update_timeout() in drivers/serial/pxa.c
Patch from Lothar Wassmann

The function serial_pxa_set_termios() is calling uart_update_timeout()
with the baud rate divisor as third parameter, while
uart_update_timeout() expects the baud rate in this place.
This results in a bogus port->timeout which is proportional to the
baud rate.

Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12 19:58:11 +01:00
Sascha Hauer ceca629e0b [ARM] 2971/1: i.MX uart handle rts irq
Patch from Sascha Hauer

handle rts interrupt

Signed-off-by: Giancarlo Formicuccia <giancarlo.formicuccia@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12 19:58:08 +01:00
Ben Dooks 17efa644f6 [ARM] 2976/1: S3C2410: add static to functions in serial driver
Patch from Ben Dooks

The s3c2410 serial driver is missing static declerations
on several functions that are not exported, and have no
need of being exported outside the driver

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12 19:58:06 +01:00
Linus Torvalds da64c6ee6b Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-10-11 16:39:24 -07:00
Tony Luck 74e52aa561 Pull mbcs-init-sn-check into release branch 2005-10-11 15:08:48 -07:00
Michael Krufky d3089792f6 [PATCH] V4L: Enable s-video input on DViCO FusionHDTV5 Lite
* bttv-cards.c:
- Enable S-Video input on DViCO FusionHDTV5 Lite

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 09:46:54 -07:00
Abhay Salunke ad6ce87e5b [PATCH] dell_rbu: changes in packet update mechanism
In the current dell_rbu code ver 2.0 the packet update mechanism makes the
user app dump every individual packet in to the driver.

This adds in efficiency as every packet update makes the
/sys/class/firmware/dell_rbu/loading and data files to disappear and reappear
again.  Thus the user app needs to wait for the files to reappear to dump
another packet.  This slows down the packet update tremendously in case of
large number of packets.  I am submitting a new patch for dell_rbu which will
change the way we do packet updates;

In the new method the user app will create a new single file which has already
packetized the rbu image and all the packets are now staged in this file.

This driver also creates a new entry in
/sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet
size here before downloading the packet file.

The user should do the following:

 create one single file which has all the packets stacked together.
 echo the packet size in to /sys/devices/platform/dell_rbu/packet_size.
 echo 1 > /sys/class/firmware/dell_rbu/loading
 cat the packetfile > /sys/class/firmware/dell_rbu/data
 echo 0 > /sys/class/firmware/dell_rbu/loading

The driver takes the file which came through /sys/class/firmware/dell_rbu/data
and takes chunks of paket_size data from it and place in contiguous memory.

This makes packet update process very efficient and fast.  As all the packet
update happens in one single operation.  The user can still read back the
downloaded file from /sys/devices/platform/dell_rbu/data.

Signed-off-by: Abhay Salunke <abhay_salunke@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 09:46:53 -07:00
Cornelia Huck e5945b4f60 [PATCH] s390: ccw device reconnect oops.
Search for a disconnect ccw_device on the ccw bus rather than on the css
bus (was a typo in patch I did for the klist conversion).  A cast to an
embedding ccw_device from an embedded device in a struct subchannel will
lead us to oopses.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 09:46:53 -07:00
Jeff Garzik 9621904012 sata_nv: Fixed bug introduced by 0.08's MCP51 and MCP55 support. 2005-10-11 01:52:39 -04:00
Jeff Garzik 1a04392bd6 Merge branch 'master' 2005-10-11 01:48:37 -04:00
Jeff Garzik 68399bb508 [libata pdc_adma] license update, minor cleanup
from me: change from OSL+GPL to GPL (with approval)

from Mark: Gets rid of an unneeded control bit, slightly increasing
throughput.
2005-10-11 01:44:14 -04:00
Jeff Garzik 875521ddcc e100: revert CPU cycle saver microcode, it causes severe problems
for certain NICs

Reverting 685fac63f5ca6c5ca06bab641e1a32bbf9287e89:
> [PATCH] e100: CPU cycle saver microcode
>
>
> Add cpu cycle saver microcode to 8086:{1209/1229} other than ICH devices.
>
> Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
> Signed-off-by: John Ronciak <john.ronciak@intel.com>
> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-11 01:38:35 -04:00
David S. Miller b8df110fea [SPARC64]: Fix oops on runlevel change with serial console.
Incorrect uart_write_wakeup() calls cause reference to a
NULL tty pointer in sunsab and sunzilog serial drivers.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-10 20:43:22 -07:00
Linus Torvalds d7dd8a72ab Use the new "kill_proc_info_as_uid()" for USB disconnect too
All the same issues - we can't just save the pointer to the thread, we
must save the pid/uid/euid combination.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 16:31:30 -07:00
Harald Welte 46113830a1 [PATCH] Fix signal sending in usbdevio on async URB completion
If a process issues an URB from userspace and (starts to) terminate
before the URB comes back, we run into the issue described above.  This
is because the urb saves a pointer to "current" when it is posted to the
device, but there's no guarantee that this pointer is still valid
afterwards.

In fact, there are three separate issues:

1) the pointer to "current" can become invalid, since the task could be
   completely gone when the URB completion comes back from the device.

2) Even if the saved task pointer is still pointing to a valid task_struct,
   task_struct->sighand could have gone meanwhile.

3) Even if the process is perfectly fine, permissions may have changed,
   and we can no longer send it a signal.

So what we do instead, is to save the PID and uid's of the process, and
introduce a new kill_proc_info_as_uid() function.

Signed-off-by: Harald Welte <laforge@gnumonks.org>
[ Fixed up types and added symbol exports ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 16:16:33 -07:00
Mark Lord edea3ab58f libata: add new driver pdc_adma for PDC ADMA ATA cards 2005-10-10 17:53:58 -04:00
Linus Torvalds f96c3bbe91 Merge master.kernel.org:/home/rmk/linux-2.6-ucb 2005-10-10 10:39:26 -07:00
Nicolas Pitre 585f54575d [ARM] 2956/1: fix the "Fix gcc4 build errors in ucb1x00-core.c"
Patch from Nicolas Pitre

drivers/mfd/ucb1x00-core.c: In function 'ucb1x00_probe':
drivers/mfd/ucb1x00-core.c:482: error: 'ucb1x00_class' undeclared (first use in this function)

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-10 18:22:17 +01:00
Benjamin Herrenschmidt 867f8b4e47 [PATCH] ide: Workaround PM problem
The logic in ide_do_request() doesn't guarantee that both drives will be
serviced after a call.  It may "forget" to service one in some
circumstances, including when one of the drive is suspended (it will
eventually fail to service the slave when the master is suspended for
example).  This prevents the wakeup requests that gets queued on wakeup
from sleep from beeing serviced in some cases when 2 drives are sharing
an IDE bus.

The problem is deep enough in the way this code works (and there are
probably a few other problematic but rare corner cases) and fixing it
would require some major rethinking of the way IDE decides which channel
to service.  This is not 2.6.14 material.  However, in the meantime,
Bart has accepted this simple workaround that will fix the crash on
wakeup from sleep since this specific corner case is actually hitting
users to get into 2.6.14.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 08:40:47 -07:00
Linus Torvalds eb1b74e097 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-10-10 08:38:52 -07:00
Steven Rostedt 220ec02911 [PATCH] pcmcia: fix task state at pccard thread exit
The pccardd thread has a race in it that it can shutdown in the
TASK_INTERRUPTIBLE state.

Make sure we mark ourselves runnable again as we remove ourselves from
the wait queue.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 08:33:27 -07:00
Ben Dooks 7dead80cbe [ARM] 2964/1: S3C2410 - serial: add .owner to driver
Patch from Ben Dooks

Initialise the driver's .owner field so that
the device driver can be referenced to the
module that owns it

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-10 10:20:07 +01:00
Ben Dooks cdfc8f5079 [ARM] 2963/1: S3C2410 - add .owner field to device_driver
Patch from Ben Dooks

Add initialisation of .owner field so that
the device driver can be referenced to the
module that owns it.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-10 10:20:06 +01:00
Sascha Hauer 86371d071b [ARM] 2957/1: imx UART Error handling
Patch from Sascha Hauer

Fix error path in imx_startup.

Signed-off-by: Giancarlo Formicuccia <gformicuccia@atinno.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-10 10:17:42 +01:00
Jeff Garzik 3d3467f0fd Merge branch 'sil24' 2005-10-09 10:54:30 -04:00
Andy Currid e710245bb0 [PATCH] Fix sata_nv handling of NVIDIA MCP51/55
Patch to fix sata_nv handling of NVIDIA MCP51/55

Signed-off-by: Andy Currid <acurrid@nvidia.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-09 09:38:28 -04:00
Tejun Heo 042c21fd2c [libata sata_sil24] add support for 3131/3531
This patch adds support for sil_3131 and sil_3531.  Both are
identical to 3124 except that they have only one port.  Bits 30 and 31
of ata_port_info->host_flags is used to encode available port numbers.
Version number is bumped to 0.22.

Edward Falk supplied all the necessary information and preliminary
patch.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2005-10-09 09:35:46 -04:00
Tejun Heo 1fcce839a5 [libata sata_sil24] nit pickings
This patch removes unused NR_PORTS macro and adds termination entry
to sil24_pci_tbl.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2005-10-09 09:31:33 -04:00
Douglas Gilbert ae00651020 [libata scsi] improve scsi error handling with ata_scsi_set_sense()
- change "xlat" and "fill" actors in libata-scsi so
    they are responsible for SCSI status and sense data
    when they return 1. This allows GOOD status or a
    specialized error to be set.
  - yield an error for mode sense requests for saved
    values [sat-r06]
  - remove static inlines for ata_bad_scsiop() and
    ata_bad_cdb() which are no longer used

Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-09 09:09:35 -04:00
Douglas Gilbert 845c5834d0 [libata scsi] add ata_scsi_set_sense helper
- add extern ata_scsi_set_sense() to build SCSI
    fixed sense data and corresponding SCSI status

Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-09 08:55:41 -04:00
Al Viro dd0fc66fb3 [PATCH] gfp flags annotations - part 1
- added typedef unsigned int __nocast gfp_t;

 - replaced __nocast uses for gfp flags with gfp_t - it gives exactly
   the same warnings as far as sparse is concerned, doesn't change
   generated code (from gcc point of view we replaced unsigned int with
   typedef) and documents what's going on far better.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08 15:00:57 -07:00
Jens Axboe 3b0e77bd14 [PATCH] scsi_ioctl: only warn for rejected commands
We should not be warning about commands that we allow, even if they are
unknown. So move the if-root-allow check up a notch.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08 15:00:57 -07:00
Linus Torvalds 58a2c3221e Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog 2005-10-08 14:58:25 -07:00
Linus Torvalds 582fd48761 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-10-08 14:57:20 -07:00
David Vrabel c2059b2e0b [PATCH] yenta: fix build if YENTA && !CARDBUS
(struct pcmcia_socket).tune_bridge only exists if CONFIG_CARDBUS is set
but building yenta_socket without CardBus is valid.

Signed-off-by: David Vrabel <dvrabel@arcom.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08 14:53:31 -07:00
Jeff Garzik d95300758b Merge branch 'master' 2005-10-08 03:31:22 -04:00
Tom 'spot' Callaway d85c3553df [SPARC]: Fix p9100 framebuffer in 2.6
The attached patch fixes the p9100 framebuffer so that text is viewable
(not black on black, like it was before the patch). The linux logo
displays for a very short period of time, then is replaced by a grey
box. This leads me to believe that this framebuffer would have problems
in X, but since there hasn't been a weitek driver for X in several
millennia, this isn't something that I can confirm or deny.

But this patch does get color console working on my SPARCbook 3TX.

Signed-off-by: Tom 'spot' Callaway <tcallawa@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-07 13:05:56 -07:00
Linus Torvalds b954cbcb1a Merge master.kernel.org:/home/rmk/linux-2.6-ucb 2005-10-06 15:01:11 -07:00
Linus Torvalds 9aec247d3b Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2005-10-06 14:16:19 -07:00
Tejun Heo 7f726d125d [PATCH] sil24: implement tf_read callback
Hello, guys.

 This patch implements ->tf_read callback for sil24.  It didn't use to
be necessary but new ata_gen_fixed_sense now makes use of ->tf_read
callback.  This patch is taken from Edward Falk's driver.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-06 13:15:02 -04:00
Russell King a448a28589 [MFD] Fix gcc4 build errors in ucb1x00-core.c
drivers/mfd/ucb1x00-core.c:555: error: static declaration of 'ucb1x00_class' follows non-static declaration
drivers/mfd/ucb1x00.h:109: error: previous declaration of 'ucb1x00_class' was here

Since ucb1x00_class isn't used by anything, remove the extern
declaration and the symbol export.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-06 13:09:42 +01:00
Tejun Heo 6a575fa969 [PATCH] sil24: implement proper TF register reading & caching
03_sil24_add-tf-reading.patch

	This patch implements proper TF register reading back and
	caching and bumps up version to 0.22.  This is taken from
	Edward's driver.

Signed-off-by: Tejun Heo <htejun@gmail.com>

 sata_sil24.c |   50 +++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 45 insertions(+), 5 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-06 05:51:24 -04:00
Tejun Heo 46b93e7bce [PATCH] sil24: remove CMDERR clearing
02_sil24_remove-cmderr-clearing.patch

	CMDERR register doesn't need clearing.  This is from Edward's
	driver.

Signed-off-by: Tejun Heo <htejun@gmail.com>

 sata_sil24.c |    4 ----
 1 file changed, 4 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-06 05:51:24 -04:00
Tejun Heo ad6e90f6d0 [PATCH] sil24: ignore non-error exception irqs
01_sil24_ignore-non-error-exception-irqs.patch

	Do not error-finish commands for non-error exception irqs -
	just ignore them.  This is taken from Edward's driver.

Signed-off-by: Tejun Heo <htejun@gmail.com>

 sata_sil24.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-06 05:51:24 -04:00
Jeff Garzik 012e060c95 Merge branch 'master' 2005-10-06 05:51:07 -04:00
Jeff Garzik e12669e774 libata: minor cleanups
A few code shuffles, to make merging future code easier.

Add (DRIVER_SENSE << 24) to certain result codes, as noted by Douglas
Gilbert.
2005-10-05 18:39:23 -04:00
Jeff Garzik 8a70f8dc08 [libata sata_mv] fix warning
shuffle ifdef location to fix the following warning:
drivers/scsi/sata_mv.c:471: warning: 'mv_dump_mem' defined but not used
2005-10-05 17:19:47 -04:00
Brett Russ 05b308e1df [PATCH] libata: Marvell function headers
adds helpful function header comments.

Signed-off-by: Brett Russ <russb@emc.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-05 17:16:52 -04:00
Brett Russ afb0edd922 [PATCH] libata: Marvell spinlock fixes and simplification
This should fix up lockups that people were seeing due to
improper spinlock placement.  Also, the start/stop DMA routines put
guarded trust in the cached state of DMA.

Signed-off-by: Brett Russ <russb@emc.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-05 17:16:52 -04:00
Jeff Garzik a939c96315 libata: move atapi_request_sense() to libata-scsi module
No content changes, just moving code around.
2005-10-05 17:09:16 -04:00
Jeff Garzik a15dbeb477 libata: ATAPI command completion tweaks and notes
1) note urgent bug, that completes command twice

2) only fix up INQUIRY data if the SCSI version is zero (typically
indicates ATAPI MMC-ish device)

3) if there is a problem on the ATA bus, don't bother with REQUEST
SENSE, just directly handle the error based on Status/Error registers.
2005-10-05 15:02:14 -04:00
Dave Jones c0758146ad [PATCH] Fix drm 'debug' sysfs permissions
Just enables some extra printk's, but still..  Only the sysadmin should
be able to do that.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-05 07:38:28 -07:00
Jeff Garzik 67846b3017 libata: add ata_ratelimit(), use it in AHCI driver irq handler 2005-10-05 02:58:32 -04:00
Jeff Garzik 0d69ae5fb7 Merge branch 'master' 2005-10-05 02:11:33 -04:00
Randy Dunlap 17b6988563 [CONNECTOR]: fix sparse gfp nocast warnings
Fix implicit nocast warnings in connector code:
drivers/connector/connector.c:102:24: warning: implicit cast to nocast type
drivers/connector/connector.c:114:45: warning: implicit cast to nocast type

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-04 22:41:16 -07:00
Randy Dunlap de54f3907d [BONDING]: fix sparse gfp nocast warnings
Fix implicit nocast warnings in bonding code:
drivers/net/bonding/bond_main.c:1302:49: warning: implicit cast to nocast type

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-04 22:39:41 -07:00
Randy Dunlap 7b5b3f3d82 [ATM]: fix sparse gfp nocast warnings
Fix implicit nocast warnings in atm code:
net/atm/atm_misc.c:35:44: warning: implicit cast to nocast type
drivers/atm/fore200e.c:183:33: warning: implicit cast to nocast type

Also use kzalloc() instead of kmalloc().

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-04 22:38:44 -07:00
Pavel Roskin 9bc39bec87 [PATCH] orinoco: Information leakage due to incorrect padding
The orinoco driver can send uninitialized data exposing random pieces of
the system memory.  This happens because data is not padded with zeroes
when its length needs to be increased.

Reported by Meder Kydyraliev <meder@o0o.nu>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04 23:37:21 -04:00
Linus Torvalds bb77c03cf4 Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband 2005-10-04 16:55:43 -07:00
Al Viro 25e2d79f52 [PATCH] bogus kfree() in ibmtr
On several failure exits in ibmtr we end up doing kfree() on dev->priv,
with dev allocated by alloc_trdev() and ->priv never reassigned.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-04 13:22:00 -07:00
Al Viro 433992361c [PATCH] missing include in megaraid_sas
megaraid_sas depends on arch-specific indirect includes pulling
fs.h in; on alpha they do not.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-04 13:22:00 -07:00
Jeff Garzik 643736a58d Merge branch 'scsi-scan' 2005-10-04 14:24:04 -04:00
Greg Edwards 96f339c6b9 [IA64] mbcs_init() should give up unless running on sn2
CONFIG_SGI_MBCS is enabled in generic kernels, but the driver may
oops some other platforms.  Check whether we are running on sn2
and bail out if we are not before doing anything dangerous.

Acked-by: Bruce Losure <blosure@americas.sgi.com>
Signed-off-by: Greg Edwards <edwardsg@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-04 09:39:18 -07:00
Linus Torvalds 43d0b1376d Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-10-04 08:11:13 -07:00
Albert Lee 9d5b130213 [libata scsi] add CHS support to ata_scsi_start_stop_xlat() 2005-10-04 08:48:17 -04:00
Albert Lee 3aef52311b [libata scsi] tidy up SCSI lba and xfer len calculations
move the redundant SCSI lba and transfer length calculation code from
ata_scsi_verify_xlat() and ata_scsi_rw_xlat() to common functions.
2005-10-04 08:47:43 -04:00
Albert Lee c187c4b58a libata: minor whitespace, comment, debug message updates 2005-10-04 08:46:51 -04:00
Mateusz Berezecki e2608361be [wireless ipw2200] remove redundant return statement 2005-10-04 08:14:00 -04:00
Alan Cox 47a8659380 libata: bitmask based pci init functions for one or two ports
This redoes the n_ports logic I proposed before as a bitmask.
ata_pci_init_native_mode is now used with a mask allowing for mixed mode
stuff later on. ata_pci_init_legacy_port is called with port number and
does one port now not two. Instead it is called twice by the ata init
logic which cleans both of them up.

There are stil limits in the original code left over

- IRQ/port mapping for legacy mode should be arch specific values
- You can have one legacy mode IDE adapter per PCI root bridge on some systems
- Doesn't handle mixed mode devices yet (but is now a lot closer to it)
2005-10-04 08:09:19 -04:00
John W. Linville 075897ce3b [PATCH] bonding: replicate IGMP traffic in activebackup mode
Replicate IGMP frames across all slaves in activebackup mode. This
ensures fail-over is rapid for multicast traffic as well. Otherwise,
multicast traffic will be lost until the next IGMP membership report
poll timeout.

This is conceptually similar to the treatment of IGMP traffic in
bond_alb_xmit. In that case, IGMP traffic transmitted on any slave
is re-routed to the active slave in order to ensure that multicast
traffic continues to be directed to the active receiver.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04 07:57:38 -04:00
John Linville 6c1792f4e8 [netdrvr s2io] Add a MODULE_VERSION entry 2005-10-04 07:51:45 -04:00
John W. Linville dbc2309d90 [PATCH] s2io: change strncpy length arg to use size of target
Use the size of the target array for the length argument to strncpy
instead of the size of the source or a magic number.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04 07:49:12 -04:00
Michal Schmidt 5323280324 airo: fix resume
Cisco Aironet doesn't resume properly from swsusp, because the resume
method confuses a PM_EVENT_* for a PCI power state. It thinks that it is
resuming from PCI_D1 and doesn't do the necessary initialization of the
card.

Signed-off-by: Michal Schmidt <xschmi00@stud.feec.vutbr.cz>
2005-10-04 07:46:21 -04:00
Ralf Baechle d591958626 [PATCH] AX.25: Convert mkiss.c to DEFINE_RWLOCK
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>

 drivers/net/hamradio/mkiss.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04 07:42:22 -04:00
Ralf Baechle 96eb549c0c [PATCH] AX.25: Delete debug printk from mkiss driver
Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>

--

 drivers/net/hamradio/mkiss.c |    1 -
 1 files changed, 1 deletion(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04 07:42:21 -04:00
Jeff Garzik be2b28ed3b e1000: fix warnings 2005-10-04 07:13:43 -04:00
Mallikarjuna R Chilakala a7990ba60a e1000: Flush shadow RAM
Flush shadow RAM to save updates to ASF related bits for 82573 controllers.
These bits are past the first 63 words of NVM.

Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04 07:08:19 -04:00
Mallikarjuna R Chilakala 352c9f854c e1000: Added msleep_interruptible delay
added msleep_interruptible delay right before returning from diag_test to allow
the phy to recover from reset

Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04 07:07:24 -04:00
Mallikarjuna R Chilakala e4c811c9d2 e1000: Fixes for packet split related issues
Fixes for packet split related issues
  * On platforms where PAGE_SIZE > 4K, driver will use only required number of
    pages compared to always using 3 pages.
  * Packet split won't be used if the PAGE_SIZE is > 16K
  * Adds a statistics counter to splits.
  * Setting the non Null ptr to zero sized buffers to solve packet split
    receive descriptor error
  * When the no of pages needed is calculated, the header buffer is not
    included for a given MTU.

Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04 07:05:44 -04:00
Mallikarjuna R Chilakala 2ae76d98fb e1000: Enable custom configuration bits for 82571/2 controllers
Enable custom configuration bits for 82571/2 controllers. The bits are
required for correct functionality of these controllers.

Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04 07:04:22 -04:00
Mallikarjuna R Chilakala 24025e4ecf e1000: implementation of the multi-queue feature
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04 07:03:23 -04:00
Mallikarjuna R Chilakala 581d708eb4 e1000: multi-queue defines/modification to data structures
defines/modifies data structures, function prototypes and changes to the
driver rendering it capable of handling <n> tx/rx queues

Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04 07:01:55 -04:00
Mallikarjuna R Chilakala 868d530994 e1000: Support for 82571 and 82572 controllers
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04 06:58:59 -04:00
Ravinandan Arakali cc6e7c44f4 [PATCH] S2io: MSI/MSI-X support (runtime configurable)
This patch adds support for MSI/MSI-X feature to the driver.  It is
a runtime parameter(for now, loadable parameter).  Default is INTA.

Patch has been tested on IA64 platform with Xframe II adapter,
both of which support MSI-X feature.  An improvement of about 7%
in throughput(both Tx and Rx) was observed and a reduction by 7%
in CPU utilization during Tx test.

Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04 06:41:24 -04:00
Jeff Garzik d9e34325fd Merge branch 'upstream-fixes' 2005-10-04 05:30:02 -04:00
Randy Dunlap 832f8f0378 [PATCH] sungem: fix gfp flags type
Fix nocast sparse warnings in sungen:
drivers/net/sungem.h:1040:45: warning: implicit cast to nocast type

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04 05:29:48 -04:00
Randy Dunlap 81c5873227 [PATCH] ns83820: fix gfp flags type
Fix implicit nocast warnings in ns83820 code, including __nocast:
drivers/net/ns83820.c:603:46: warning: implicit cast to nocast type

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04 05:29:48 -04:00
Ion Badulescu 67974231d4 [netdrvr starfire] fix highmem and broken firmware issues
Unfortunately, [your patch] might address the crash but doesn't address
the real problem. It turns out that the problem is one of padding
(the firmware cksum engine works only on 32-bit chunks, yuck), so
the special casing for length == 1 wasn't sufficient anyway.

This patch addresses the issue, as well the other issue of i386 +
CONFIG_HIGHMEM being broken. It is pretty much the same workaround
that Adaptec themselves used in their Windows driver. I have yet to
check if it fixes the problem when the skb is non-linear, but this
patch _will_ solve the problem for 99% of the users out there (those
not using sendfile).

Signed-off-by: Ion Badulescu <ionut@badula.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:31:36 -04:00
Grant Coady 32fa2bfcf8 [PATCH] net/Kconfig: convert pocket_adapter ISA to PARPORT
This patch changes pocket and parallel adaptors to depend on PARPORT
instead of ISA in order to get the option in newer SuperIO based systems.

Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:23:26 -04:00
Wade Farnsworth 49a9db07ab [PATCH] emac: add support for platform-specific unsupported PHY features
This patch adds support to the ibm_emac driver for platform-specific
unsupported PHY features.

The patch attempts to determine the highest speed and duplex when
autonegotiation is unsupported.

Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:21:33 -04:00
Philippe De Muyter 32b5bfab9a [PATCH] tulip DC21143 rev 48 10Mbit HDX fix
The patch below is necessary to allow my Digital DS21143 Tulip rev 48
ethernet interface to work in a 10Mbit Half Duplex network.  Without
it, the driver keeps retrying other modes in an endless loop.  It seems
like someone already had the same problem with a rev 65 board :)

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:16:42 -04:00
Jay Vosburgh 217df670d9 [PATCH] fix bonding crash, remove old ABI support
David S. Miller <davem@davemloft.net> wrote:
>I think removing support for older ifenslave binaries is
>the least painful solution to this problem.

	This patch removes backwards compatibility for old ifenslave
binaries (ifenslave prior to verison 1.0.0).

	I did not similarly modify ifenslave itself; with sysfs on the
horizon, I don't see that as being worthwhile.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:15:00 -04:00
Brett Russ 31961943e3 [PATCH] libata: Marvell SATA support (DMA mode) (resend: v0.22)
This is my libata compatible low level driver for the Marvell SATA
family.  Currently it runs in DMA mode on a 6081 chip.

The 5xxx series parts are not yet DMA capable in this driver because
the registers have differences that haven't been accounted for yet.
Basically, I'm focused on the 6xxx series right now.  I apologize for
those seeing problems on the 5xxx series, I've not had a chance to
look at those problems yet.

For those curious, the previous bug causing the SCSI timeout and
subsequent panics was caused by an improper clear of hc_irq_cause in
mv_host_intr().

This version is running well in my environment (6081 chips,
with/without SW raid1) and is showing equal or better performance
compared to the Marvell driver (mv_sata) in my initial tests (timed
dd's of reads/writes to/from memory/disk).

I still need to look at the causes of occasional problems such as this:

ata11: translating stat 0x35 err 0x00 to sense
ata11: status=0x35 { DeviceFault SeekComplete CorrectedError Error }
SCSI error : <10 0 0 0> return code = 0x8000002
Current sda: sense key Hardware Error
end_request: I/O error, dev sda, sector 3155010

and this, seen at init time:

ATA: abnormal status 0x80 on port 0xE093911C

but they aren't showstoppers.

Signed-off-by: Brett Russ <russb@emc.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:08:19 -04:00
Ursula Braun 500f83abdc [PATCH] s390: introducing support in qeth for new OSA CHPID type OSN
This patch introduces new feature in qeth:
	qeth enhancement provides the device driver support for
        the Communication Controller for Linux on System z9 and zSeries
        (CCL), which is software that enables running the Network Control
        Program (NCP) on a zSeries machine. The OSA CDLC support is based
        on a new IBM mainframe CHPID type called Open Systems Adaper for
        NCP (OSN). In case of OSN qeth communicates with the type-OSN
        OSA-card on one hand, and with the CCL-kernel-component Network
        Device Handler (NDH) on the other.

Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:06:46 -04:00
Jeff Garzik 3c8c7b2f32 Merge branch 'upstream-fixes' 2005-10-03 22:06:19 -04:00
Ursula Braun 9123e0d789 [PATCH] s390: qeth driver fixes
From: Peter Tiedemann <ptiedem@de.ibm.com>
From: Frank Pavlic <pavlic@de.ibm.com>
	minor qeth fixes:
	- free old skb in qeth_realloc_headroom after duplicating skb
	- disable IPV6 support for Hipersockets devices
	- call ccw_device_set_offline on every channel regardless
	  of the return value of the prior ccw_device_set_offline calls
	- allocate qdio structures in DMA-area
	- schedule recovery of appropriate card
	  when cable has been inserted again.
	- add missing initialization of card->lock
	- write sequence number in skb->cb for SNA protocol which
	  requires strictly serialized packets.

Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>

diffstat:
 qeth.h      |    2 ++
 qeth_main.c |   37 +++++++++++++++++--------------------
 2 files changed, 19 insertions(+), 20 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:05:38 -04:00
Komuro bb53d6d0e7 [netdrvr] fix smc91c92_cs multicast bug
The smc91c92_cs multicast does not work
if the count of multicast address is 1.

Signed-off-by: <komurojun-mbn@nifty.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:03:28 -04:00
Randy Dunlap 0a1c80f111 [PATCH] ns83820: fix gfp flags type
Fix implicit nocast warnings in ns83820 code:
drivers/net/ns83820.c:603:46: warning: implicit cast to nocast type

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:01:14 -04:00
Jouni Malinen 7cb3cd090c [PATCH] hostap: Unregister netdevs before freeing local data
Unregister all netdevs before freeing local data. I was unable to
trigger any crashes without this change when running busy loops for
driver operations when ejecting a Prism2 PC Card. Anyway, should there
be a race condition with this, better make it less likely to happen by
unregistering the netdevs first.

Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:00:09 -04:00
Jouni Malinen c355184cd3 [PATCH] hostap: Do not free local->hw_priv before unregistering netdev
local->hw_priv was being freed and set to NULL just before calling
prism2_free_local_data(). However, this may expose a race condition in
which something ends up trying to use hw_priv during shutdown. I
haven't noticed this happening, but better be safe than sorry, so
let's postpone hw_priv freeing to happen only after
prism2_free_local_data() has returned.

Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:00:08 -04:00
Jouni Malinen f7a7444755 [PATCH] hostap: Fix hostap_pci build with PRISM2_IO_DEBUG
The debug version of I/O functions in hostap_pci had not survived the
change to start using hw_priv pointer, so let's fix them to actually
define the local hw_priv variable.

Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:00:08 -04:00
Jouni Malinen bab76198b3 [PATCH] hostap: Remove hw specific dev_open/close handlers
Host AP driver used hardware model specific dev_open/close handlers
that were called on dev_open/close if the hardware driver had
registered the handler. These were only used for hostap_cs and only
for tracking whether any of the netdevs were UP. This information is
already available from local->num_dev_open, so there is not need for
the special open/close handler.

Let's get rid of these handlers. In addition to cleaning up the code,
this fixes a module refcounting issue for hostap_cs where ejecting the
card while any of the netdevs were open did not decrement refcount
properly.

Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:00:08 -04:00
Stephen Hemminger c2681dd8c7 [PATCH] skge: set mac address oops with bonding
Skge driver was bringing link up/down when changing mac
address.  This doesn't work in the bonding environment, and is
more effort than needed.

Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=5271

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 21:58:33 -04:00
Jeff Garzik 3f19ee8cb3 [libata] improve device scan even more
Since our max_lun is unconditionally set to 1, we might as well
hardcode a LUN 0 probe, rather than a wildcard LUN scan.

The ide-scsi driver sets max_lun to a value greater than under
certain conditions:

        if ((drive->id->last_lun & 0x7) != 7)
                host->max_lun = (drive->id->last_lun & 0x7) + 1;
        else
                host->max_lun = 1;

last_lun is Word 126 of IDENTIFY PACKET DEVICE, marked as obsolete
and undocumented in non-ancient specs.  We'll leave it out for now.
Should the need arise to support multi-LUN ATAPI devices, we'll
probably want to add the above code.

Finally, there have been reports of REPORT LUNS commands locking up
ATAPI drives.  Eliminating the wildcard LUN scan could help reduce
the trouble from problematic drives.
2005-10-03 21:36:41 -04:00
David S. Miller fdc657c666 [SUNSU]: Fix bogus locking in sunsu_change_mouse_baud()
The lock is not held when calling this function, so we
shouldn't drop then reacquire it.

Based upon a report from Jim MacBaine.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-03 17:37:27 -07:00
Jeff Garzik 2b23582609 Merge branch 'master' 2005-10-03 19:46:45 -04:00
David S. Miller ed39f731ab [TG3]: Update driver version and release date.
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-03 16:25:23 -07:00
Herbert Xu e5ed639913 [IPV4]: Replace __in_dev_get with __in_dev_get_rcu/rtnl
The following patch renames __in_dev_get() to __in_dev_get_rtnl() and
introduces __in_dev_get_rcu() to cover the second case.

1) RCU with refcnt should use in_dev_get().
2) RCU without refcnt should use __in_dev_get_rcu().
3) All others must hold RTNL and use __in_dev_get_rtnl().

There is one exception in net/ipv4/route.c which is in fact a pre-existing
race condition.  I've marked it as such so that we remember to fix it.

This patch is based on suggestions and prior work by Suzanne Wood and
Paul McKenney.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-03 14:35:55 -07:00
Michael Chan 399de50bbb [TG3]: Refine AMD K8 write-reorder chipset test.
Test for VIA K8T800 north bridge instead of AMD K8 HyperTransport
bridge based on new information from Andi Kleen. The AMD
HyperTransport interface is not responsible for PCI transactions
and so the re-ordering is more likely done by the VIA north bridge.
This code is subject to change if we get more information from AMD
or VIA.

PCI Express devices are excluded from doing the read flush since all
chipsets in the write_reorder list are PCI chipsets.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-03 14:02:39 -07:00
Al Viro a232f76732 [CASSINI]: Convert to ethtool_ops
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-03 14:01:37 -07:00
Jeff Garzik 644dd0cc49 [libata] improve device scan
Replace SCSI's legacy "bang at the door" method of probing with one
directly controlled by the underlying ATA transport layer.

We now only call scsi_scan_target() for devices we find, rather than
probing every possible channel/id within a certain range.
2005-10-03 15:55:19 -04:00
Linus Torvalds 7d6322b465 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6 2005-10-03 08:07:10 -07:00
James Bottomley 51c928c34f [SCSI] Legacy MegaRAID: Fix READ CAPACITY
Some Legacy megaraid cards can't actually cope with the scatter/gather
version of the READ CAPACITY command (which is what we now send them
since altering all SCSI internal I/O to go via the block layer).  Fix
this (and a few other broken megaraid driver assumptions) by sending
the non-sg version of the command if the sg list only has a single
element.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-03 08:39:48 -05:00
James Bottomley 97af50f60f [SCSI] aic7xxx/aic79xx: fix module removal path not to panic
In these drivers, scsi_remove_host() is called too late, at the point
it is called, the driver has already shut down too far to accept any
I/O that the shutdown might generate.  Any generated I/O actually
triggers a panic.

Fix this by calling scsi_remove_host() as early as possible and not
calling scsi_host_put() until just before we kfree the ahc_softc.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-02 15:32:25 -05:00
James Bottomley 9e70592fcd [SCSI] fix potential panic with proc on module removal
There's a problem in our host release in that it calls
scsi_proc_hostdir_rm(). However, if you hold a reference to the host as
you remove the module, the host template (which proc uses) will be freed
and the system will panic when the host device is finally released.

Fix this by moving scsi_proc_hostdir_rm() to where it should be: in
scsi_remove_host().

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-02 15:20:03 -05:00
Russell King 487fd4eb14 [ARM] Fix init printk for EBSA110 network driver, and link timer
Arrange for the initialisation printks to happen after we've
registered the network interface, so we know what name the
device is.  Also, check the link every 500ms (and use
msecs_to_jiffies.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-02 18:12:03 +01:00
Russell King 0e3a64e216 [ARM] Fix EBSA110 network driver link detection
EBSA110 link detection didn't read the register - it wrote it.  Oops.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-02 18:02:25 +01:00
Linus Torvalds b620cc2cd8 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-10-01 17:02:13 -07:00
Sven Henkel 14bfd1ff94 [PATCH] pmac/radeonfb: Add suspend support for M11 chip in new iBook 12"
This adds suspend support for the Radeon M11 chip in 12" iBooks
manufactured after July 2005.  I don't know if the new 14" iBooks also
have that chip, so they might also be supported.

The chip identifies itself as "RV350 NV" (pci id 0x4e56), revision 0x80.
Apple calls it "Snowy", xfree86 names it "ATI FireGL Mobility T2 (M11)
NV (AGP)".  So, we seem to be lucky here: The suspend-code for the M10
(which also is a "RV350 NV") works flawless for that chip.

Signed-off-by: Sven Henkel <shenkel@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-01 17:01:48 -07:00
Vincent Sanders 9f4426dde2 [ARM] 2944/1: GCC 4 mx1ads serial driver compile fix
Patch from Vincent Sanders

When building the mx1ads ARM platforms the serial driver fails to compile
with GCC 4.01 due to extern/static ambiguity.

Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-01 22:56:34 +01:00
Francois Romieu f0e837d918 [PATCH] r8169: tone down the r8169 driver
Tone down the r8169 driver

As an alternative, people can use the boot time 'debug' option and/or use
'ethtool -s ethX msglvl xyz'.  The different messages are listed at:
http://www.zoreil.com/~romieu/r8169/doc/msglvl.txt

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 17:20:21 -07:00
Michael S. Tsirkin aba7a22f29 [IB] mthca: Fix memory leak on device close
Remember to free the multicast group context memory table.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-30 13:55:50 -07:00
Jody McIntyre 32e7a04faa [PATCH] ohci1394: less noise in dmesg
less noise in dmesg

Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:20 -07:00
Jody McIntyre f31c9cf3bd [PATCH] ieee1394: delete legacy module aliases
amdtp, dv1394, raw1394, video1394:

Delete legacy module aliases.  The macros did not work and the aliases are not
needed nowadays.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre 3ae3d0d4ae [PATCH] eth1394: workaround limitation in rawiso routines
Work around limitation in rawiso routines.  Required with 1394b cards on
architectures where PAGE_SIZE is 4096.  Based on a previous patch by Ben
Collins.

Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre 998150c3d3 [PATCH] ieee1394: remove superfluous include in csr1212
Remove superfluous include.

Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre 3256cc1398 [PATCH] ieee1394: trivial edits of a few comments
trivial edits of a few comments

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre 63bea35036 [PATCH] ieee1394: use time_before()
Use of time_before() macro, defined at linux/jiffies.h, which deal with
wrapping correctly and are nicer to read.

Signed-off-by: Marcelo Feitoza Parisi <marcelo@feitoza.com.br>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre db2fd664f8 [PATCH] ieee1394: fix for debug output
Fix debug code so it prints the correct speed (was defaulting to 100, so
anything > 400 showed only 100).

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre e31a127c2f [PATCH] ieee1394: skip unnecessary pause when scanning config ROMs
Skip a superfluous pause that occured when the config ROM of a node was
scanned unsuccessfully.  This also occurs if a node without link wrongly
enables its "link active" self ID flag.  A GWCTech 6-port hub does this.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre 328699bf0f [PATCH] ieee1394: reorder activities after bus reset (fixes device detection)
Units were not detected if the local IRM performed a bus reset.  ("The root
node is not cycle master capable; selecting a new root node and resetting...",
often seen with iPods and other SBP-2 devices).  Rearrange the order of IRM
duties and node scanning.  TODO: Audit the ROM caching and parsing code for
underlying issues.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre 2bab359a50 [PATCH] sbp2: default to serialize_io=1
Set serialize_io=1 by default.  This is safer and required by seemingly more
and more hardware.  It causes little or no performance loss for S400 devices.
Performance of S800 1394b devices may drop by 25...30%.  Therefore make the
parameter's description and dmesg message clearer about performance impact.

Update description of the max_speed parameter too.  IEEE1394_SPEED_MAX is
currently S800.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre abd559b105 [PATCH] sbp2: fix deadlocks and delays on device removal/rmmod
Fixes for deadlocks of the ieee1394 and scsi subsystems and long delays in
futile error recovery attempts when SBP-2 devices are removed or drivers are
unloaded.

 - Complete commands quickly with DID_NO_CONNECT if the 1394 node is gone or if
   the 1394 low-level driver was unloaded.
 - Skip unnecessary work in the eh_abort_handler and eh_device_reset_handler if
   the node or 1394 low-level driver is gone.
 - Let scsi's high-level shut down gracefully when sbp2 is being unloaded or
   detached from the 1394 unit. A call to scsi_remove_device is added for this
   purpose, which requires us to store a scsi_device pointer.
 - scsi_device pointer is obtained from slave_alloc hook and cleared by
   slave_destroy. This avoids usage of the pointer after the scsi device was
   deleted e.g. by the user via scsi_mod's sysfs interface.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:18 -07:00
Brent Casavant d38e24e260 [PATCH] ioc4_serial: Remove bogus error message
This change removes a bogus error message from the IOC4 serial driver
interrupt handler.

This error message is bogus for two reasons.  First, it can never occur
given that current code takes care to initialize IOC4 in such a way that
these "unknown" interrupts could never occur.  Second, this code fails to
take into account that other drivers can share the IOC4 interrupt mechanism
through SA_SHIRQ, and thus this driver is not in-fact "all-knowing".

Finally, this error message triggers every time some "unknown" interrupt
occurs -- it's not rate limited or repetition limited in any way, thereby
effectively denying use of the console device.  Given its bogosity in the
first place, it's best to just get rid of it entirely.

Acked-by: Pat Gefre <pfg@sgi.com>
Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:18 -07:00
Michael Krufky 79dfa4a5a2 [PATCH] v4l: DViCO FusionHDTV5 Lite GPIO Fix
GPIO fix for the composite and tv mute states of bt8xx card #135: DViCO
FusionHDTV5 Lite.  Without this patch, selecting one of these states could
produce unexpected behavior.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:18 -07:00
Daniel Ritz 03cdc0c304 [PATCH] usb/core/hcd-pci.c: don't free_irq() on suspend
the free_irq() in USB suspend breaks resume on some setups where USB
(ohci/ehci) shares the interrupt with an other device.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 09:23:30 -07:00
Linus Torvalds c4a7c77fcb Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-09-30 08:43:13 -07:00
Al Viro 66df3bbf07 [PATCH] volatile unsigned short f(...) doesn't make sense
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 08:42:24 -07:00
Al Viro 46d7031ecb [PATCH] cassini annotations and fixes
- __user annotations
 - NULL noise removal
 - C99 initializers
 - s/u32/pm_message_t/ in ->suspend()
 - removal of bogus casts in iounmap() arguments
 - if_mii() instead of open-coded variant

Remains to be done: ethtool conversion.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 08:42:24 -07:00
Linus Torvalds 1dd465cac8 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-09-30 08:39:56 -07:00
David S. Miller 017fb98e70 [RADEON]: Fix unaligned I/O port access during probe.
The driver does a readl() on DEVICE_ID which is 2-byte aligned and
2-bytes in size.  It's doing this read just to flush write buffers.

Create IN16() and OUT16() macros, and use the former to do this I/O
load.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-29 19:26:51 -07:00
Benjamin Herrenschmidt a44fe13eab [PATCH] Fix ppc64 smu driver locking
The SMU driver has a small mistake in the locking of the interrupt code,
if polled access and interrupt access race, interrupt may take a lock
and return without releasing it. This fixes it. With that patch, the
driver is rock solid with my experimental thermal control (which bangs
it pretty hard) racing with real time clock and cpufreq handling.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 15:42:58 -07:00
Linus Torvalds b20fd6508c Merge master.kernel.org:/home/rmk/linux-2.6-serial 2005-09-29 09:00:04 -07:00
Linus Torvalds eb693d2994 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2005-09-29 08:56:47 -07:00
Deepak Saxena 82810a906f [PATCH] Fix ixp4xx MTD driver module build
Missing ';' breaks module build.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 08:55:13 -07:00
Ben Dooks fe984bba30 [PATCH] s3c2410fb: Minor warning fix
The function s3c2410fb_activate_var does not return
a value, therefore it should be declared void.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 08:54:20 -07:00
Antonino A. Daplas 375726d7ed [PATCH] intelfb: Fix regression (blank display) from ioremap patch
- Workaround for the ioremap patch that produces a blank display on some
  chipsets
- Make hwcursor = 0 the default.  The hardware cursor does not work with all
  hardware.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 08:54:20 -07:00
Al Viro b2846dfa4a [PATCH] mv64x60_wdt __user annotations and cleanups
- use nonseekable_open() instead of messing with

	if (*ppos != file->f_pos)
		return -EISPIPE

   in ->write() (->read is NULL).

 - trivial __user annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 08:46:27 -07:00
Al Viro ae8aed0314 [PATCH] saa6588 __user annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 08:46:27 -07:00
Al Viro be88ec74cb [PATCH] i810-i2c iomem annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 08:46:27 -07:00
Al Viro 775b048d09 [PATCH] cyblafb: portability fixes, sanitized work with pointers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 08:46:26 -07:00
Alexey Dobriyan 87e0f3dbd3 [PATCH] n_r3964: drop bogus fmt casts
- print pointers with %p
 - casting pointer structure field to int and printing it with %d...

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 08:46:26 -07:00
Al Viro 666002218d [PATCH] proc_mkdir() should be used to create procfs directories
A bunch of create_proc_dir_entry() calls creating directories had crept
in since the last sweep; converted to proc_mkdir().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 08:46:26 -07:00
Wim Van Sebroeck 195331d7c9 [WATCHDOG] pcwd_pci.c add debug module_param
Add debugging code for the pcwd_pci driver.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2005-09-29 16:22:30 +02:00
Wim Van Sebroeck a0800f6da7 [WATCHDOG] pcwd_pci.c control status + boot-code clean-up
* Clean-up control status code (use control status defines +
  change pcipcwd_clear_status)
* Clean-up boot-code (move card info to pcipcwd_show_card_info() )

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2005-09-29 16:21:50 +02:00
Russell King fc611a1a50 [ARM] Don't include mach-types.h unnecessarily
It's pointless to include mach-types.h if you're not going to use
anything from it.  These references were removed as a result of:

grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type'

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-29 11:15:51 +01:00
Russell King d087790447 [ARM] Don't include asm/arch/hardware.h directly
Since asm/hardware.h's only reason for existing is to include
asm/arch/hardware.h, it's completely pointless to include both.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-29 11:12:52 +01:00
Russell King ca5da71062 [ARM] pxafb: Remove #if DEBUG, convert DPRINTK to pr_debug
Fix warning:
 drivers/video/pxafb.h:119:5: warning: "DEBUG" is not defined
by removing the whole
 #if DEBUG
 #define DPRINTK(fmt, args...) printk...etc...
 #else
 #define DPRINTK(fmt, args...)
 #endif
stuff - we have pr_debug() for this.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-29 09:44:54 +01:00
Roland Dreier d70ed6075f [IPoIB] Rename IPoIB's path_lookup() to avoid name clashes
Rename IPoIB driver's path_lookup() to ipoib_path_lookup() to avoid a
clashes with the kernel global path_lookup().  We don't hit this with
the current kernel source, but some external patches seem to trigger
this, and it's cleaner to avoid clashing with global names anyway.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
refs/heads/for-linus
2005-09-28 19:56:57 -07:00
Dominik Brodowski 54bb5675a6 [PATCH] pcmcia: only start up nonstatic sockets if both mem and io are available
Only start up nonstatic sockets if both IO and MEM resources are available.
Thanks to Russell King and Matthew Wilcox for tracking this down.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-28 20:11:30 +02:00
Dominik Brodowski 1146bc743e [PATCH] pcmcia: allow one port excludes
Allow for excluding only one port in /etc/pcmcia/config.otps

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-28 20:11:26 +02:00
Jeff Garzik 64f09c98d7 /spare/repo/libata-dev branch 'chs-support' 2005-09-28 12:11:15 -04:00
Albert Lee 14be71f4c5 [PATCH] libata: rename host states
Changes:
s/PIO_ST_/HSM_ST_/ and s/pio_task_state/hsm_task_state/.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-28 11:58:39 -04:00
Albert Lee ee500aabf1 [PATCH] libata: indent and whitespace change
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-28 11:57:29 -04:00
Linus Torvalds 2dd3c1df95 Merge branch 'for-linus' from master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband 2005-09-28 07:47:55 -07:00
Alasdair G Kergon 485ef69ede [PATCH] device-mapper: Fix queue_if_no_path initialisation
When creating a multipath device, if the queue_if_no_path parameter is
specified it gets ignored.

While the queue_if_no_path variable is correctly set to 1, the
saved_queue_if_no_path gets set to 0.  When the device is subsequently made
live (resumed), the saved value (0) always overwrites the live value (1) so
the option *always* gets turned off.

The fix adds a parameter to the queue_if_no_path() function to indicate
whether the previous value should be preserved or not - if not, as when the
device is being set up, the saved value is set to the new value (1).

Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28 07:46:42 -07:00
goggin, edward 269fd2a6f8 [PATCH] device-mapper: Trigger an event when a table is deleted
If anything is waiting on a device's table when the device is removed, we
must first wake it up so it will release its reference.  Otherwise the
table's reference count will not drop to zero and the table will not get
removed.

Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28 07:46:42 -07:00
Benjamin Herrenschmidt f65a4d10c8 [PATCH] orinoco: Fix flood of kernel log with stupid WE warnings
Latest wireless extensions moved a field from netdev -> wireless_handlers.
The WE core will now printk a warning on every call to get_wireless_stats()
on a driver that still uses the old field.  This patch fixes orinoco.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28 07:46:41 -07:00
Corey Minyard a9d014afc3 [PATCH] Add IPMI poweroff control to sysfs
Put the IPMI poweroff_powercycle parameter into sysfs.  This field is
dynamically settable and is valuable to have in sysfs.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28 07:46:41 -07:00
Jon Burgess 88bdcc5d5e [PATCH] dvb: fix NULL pointer dereference when loading the budget-av module
Ralph Metzler wrote:
> AFAIR, there is a bug in tda10021.c in tda10021_readreg() which
> references state->frontend.dvb->num
> This is fatal if the frontend is not at the probed address and thus
> not yet registered (no dvb entry set yet -> NULL pointer ...).

The attached patch should get rid of the oops.

Signed-off-by: Jon Burgess <jburgess@uklinux.net>
Cc: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28 07:46:40 -07:00
David S. Miller 1f26dac320 [NET]: Add Sun Cassini driver.
Written by Adrian Sun (asun@darksunrising.com).
Ported to 2.6.x by Tom 'spot' Callaway <tcallawa@redhat.com>.
Further cleaned up and integrated by David S. Miller

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27 15:24:13 -07:00
Jack Morgenstein a1c337afaf [IB] mthca: fix hw_ver value returned from mthca_query_device
The IB spec defines the field to be 32 bits, not 16 bits.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-27 13:54:44 -07:00
Linus Torvalds 63906e41fe Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2005-09-27 13:32:33 -07:00
David S. Miller c8a6c29639 [TG3]: Update driver version and release date.
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27 12:13:38 -07:00
Michael Chan f9804ddbee [TG3]: misc. fixes
Fix interrupt test handler by adding check for IRQ assertion in
PCI_STATE register in addition to the status block updated bit.

Add test for valid ethernet address in tg3_set_mac_addr().

Add tg3_bus_string() to setup the PCI bus speed/width string for all
PCI/PCIX/PCI Express devices. This is used to print the bus type
during init_one().

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27 12:13:10 -07:00
Michael Chan c94e39418a [TG3]: 5780 PHY fixes
Fix 5780 PHY related problems:

1. MAC_RX_MODE reset must be done before setting up the MAC_MODE
   register on 5705_PLUS chips or the chip will stop receiving after
   a while. The MAC_RX_MODE reset is needed to prevent intermittently
   losing the first receive packet on serdes chips.

2. Skip MAC loopback test on 5780 because of hardware errata. Normal
   traffic including PHY loopback is not affected by the errata.

3. PHY loopback fails intermittently on 5708S and this is fixed by
   putting the PHY in loopback mode first before programming the MAC
   mode register. A MAC_RX_MODE reset is also added.

4. Return -EINVAL in tg3_nway_reset() if device is in TBI mode. Allow
   nway_reset if 5780S is in parallel detect mode.

5. Add missing PHY IDs in KNOWN_PHY_ID() macro.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27 12:12:42 -07:00
Michael S. Tsirkin f02b16bea2 [IB] mthca: Round up number of slots in HCA context memory table
When allocating a table for mem-free HCA context, don't assume that
obj_size * nobj is an even multiple of MTHCA_TABLE_CHUNK_SIZE.  In
particular, make sure we allocate at least one slot even if the table
is smaller than MTHCA_TABLE_CHUNK_SIZE.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-26 21:12:26 -07:00
Linus Torvalds 5c1f4cac6f Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2005-09-26 18:33:26 -07:00
Linus Torvalds bf0cbb3e42 Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6 2005-09-26 18:31:36 -07:00
Al Viro 7625d483a4 [PATCH] missing asm/irq.h (cs89x0)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-26 18:29:49 -07:00
Mark Haverkamp 1640a2c385 [SCSI] aacraid: remove aac_insert_entry
Received from Mark Salyzyn from Adaptec.

High Priority Queues have *never* been used in the entire history of the
aac based adapters. Associated with this, aac_insert_entry can be
removed, SavedIrql can be removed & padding variable can be removed.
With the movement of SavedIrql out & replaced with an automatic variable
qflags, the locking can be refined somewhat. The sparse warnings did not
catch the need for byte swapping in the 'dprintk' debugging print
macros, so fixed this up when this code was moved outside of the now
refined locking.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-26 17:49:07 -05:00
Mark Haverkamp 63a70eeaaf [SCSI] aacraid: fib size math fix
Received from Mark Salyzyn from Adaptec.

The size of the command packet's scatter gather list maximum size was
miscalculated in the low range leading to the driver initialization
limiting the maximum i/o size that could go to the Adapter. There were
no negative operational side effects resulting from this bad math, only
a subtle limit in performance of the Adapter at the top end of the
range.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-26 17:48:29 -05:00
Mark Haverkamp 9203344cb8 [SCSI] aacraid: initialization timeout
Received from Mark Salyzyn from Adaptec.

In the rare instances where the adapter, or the motherboard, is
misbehaving; driver initialization or shutdown becomes problematic. By
introducing a 3 minute timeout on the first interrupt driven command
during initialization, or the issuance of the adapter shutdown command
during driver unload, we can resolve the lockup problems induced by
common (but rare) hardware misbehaviors.

The timeout during initialization, should it occur, is accompanied by a
message presented to the console and the logs indicating that the user
should inspect and resolve problems with interrupt routing.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-26 17:46:59 -05:00
Mark Haverkamp 08efb7b611 [SCSI] aacraid: error return checking
This patch adds some additional error return checking and error return
value propagation during initialization. Also, the deprecation of
pci_module_init with pci_register_driver along with the change in return
values.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-26 17:46:18 -05:00
Mark Haverkamp 131256cf20 [SCSI] aacraid: handle AIF hotplug events (update)
Received from Mark Salyzyn from Adaptec.

Hotplug sniffs the AIFs (events) from the adapter and if a container
change resulting in the device going offline (container zero), online
(container zero completed) or changing capacity (morph) it will take
actions by calling the appropriate API.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-26 17:42:50 -05:00
Mark Haverkamp 2f130980d1 [SCSI] aacraid: aacraid: AIF preallocation (update)
Recevied from Mark Salyzyn from Adaptec.

Aif pre-allocation is used to pull the kmalloc outside of the locks.

Applies to the scsi-misc-2.6 git tree.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-26 17:41:49 -05:00
Mark Haverkamp 7a8cf29d69 [SCSI] aacraid: Greater than 2TB capacity support
Received from Mark Salyzyn from Adaptec.

There are a few adapters that are capable of creating devices with this large
of a capacity, but now that we have the large fib support in, the management
applications will be capable of generating them.  The problem is, once they are
created, the driver will not be able to access the devices correctly without
this patch.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-26 17:41:13 -05:00
Bagalkote, Sreenivas c4a3e0a529 [SCSI] MegaRAID SAS RAID: new driver
Signed-off-by: Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-26 17:32:44 -05:00
Evgeniy Polyakov acd042bb2d [CONNECTOR]: async connector mode.
If input message rate from userspace is too high, do not drop them,
but try to deliver using work queue allocation.

Failing there is some kind of congestion control.

It also removes warn_on on this condition, which scares people.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 15:06:50 -07:00
Roland Dreier 63c47c286d [IB] uverbs: Close some exploitable races
Al Viro pointed out that the current IB userspace verbs interface
allows userspace to cause mischief by closing file descriptors before
we're ready, or issuing the same command twice at the same time.  This
patch closes those races, and fixes other obvious problems such as a
module reference leak.

Some other interface bogosities will require an ABI change to fix
properly, so I'm deferring those fixes until 2.6.15.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-26 13:01:03 -07:00
Michael S. Tsirkin 44dd823b00 [IB] mthca: Fix off by one bug in mthca_map_cmd
The loop in mthca_map_cmd() would fill one entry past the end of the
mailbox buffer before calling the firmware command.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-26 09:42:09 -07:00
Michael S. Tsirkin f7ed3a5971 [IB] mthca: fix off by one in clr_int calculation
We should use the first word of the clear interrupt register if
the bit we're after is < 32, not < 31.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-26 09:38:34 -07:00
Roland Dreier 018771f435 [IB] mthca: Fix doorbell record resource leak
If we allocate a bunch of doorbell records and then free them, we'll
end up with completely empty pages, which we then free.  However, when
we come back to allocate more doorbell pages, we have to reallocate
those empty pages rather than always trying to take a slot that we've
never used.  If we don't, we eventually use up every slot and fail to
allocate a doorbell record, even though we have plenty of free space.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-26 09:38:26 -07:00
Dominik Brodowski 2570b74648 [PATCH] pcmcia: update ID for NinjaATA
Christian Zoz reported there are multiple NinjaATA devices all sharing the
second product ID string, but not the first one.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:31 +02:00
Daniel Ritz f9cb8b71e7 [PATCH] yenta: more ENE bridges
Adds better support for the CB-710, CB-712, CB-720 and CB-722 bridges from EnE

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:29 +02:00
Dominik Brodowski a42f0dc437 [PATCH] pcmcia: new IDs for serial_cs
Add new ID to serial_cs.c; the CIS fimware override is available by the
manufacturer at http://www.sierrawireless.com .  Remember to name the CIS
binary SW_7xx_SER.cis and to put it into /lib/firmware/

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:28 +02:00
Daniel Ritz 6c1a10dba9 [PATCH] yenta: add support for more TI bridges
Support some more TI cardbus bridges.  most of them are multifunction
devices which adds 1394 controllers, smartcard readers etc.  this could
also help with the various problems with the XX21 controllers seen on the
linux-pcmcia list.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:27 +02:00
Komuro 81000808b6 [PATCH] pcmcia: fix Kconfig dependency
TCIC depends on ISA.  It is used with ISA-bus system only.

Signed-off-by: komurojun-mbn@nifty.com
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:26 +02:00
Dominik Brodowski 8e5d17ebe4 [PATCH] yenta: tiny cleanup
pci_set_power_state is not needed, as we call pci_enable_device() somewhere
else.  Also, the resource we write to PCI_BASE_ADDRESS_0 needs to be converted
to bus-centric view first.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:25 +02:00
Daniel Ritz a413c09094 [PATCH] yenta: don't mess with bridge control register
In interrupt probing (both ISA and PCI) the bridge control register is used
to change interrupt routing to ISA or PCI by changing bit 7.  But this bit
only controls the routing of card functional interrupts, not the CSC
interrupts which are used for interrupt probing.

A bad side effect of messing with this register in yenta_probe_irq() is
that it can lead to irq storms if a card is inserted and already powered by
the BIOS.

Usage in yenta_sock_init() and yenta_config_init() seem to be fishy as well.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:24 +02:00
Daniel Ritz 8c3520d4eb [PATCH] yenta: auto-tune EnE bridges for CardBus cards
Echo Audio cardbus products are known to be incompatible with EnE bridges.
in order to maybe solve the problem a EnE specific test bit has to be set,
another cleared...but other setups have a good chance to break when just
forcing the bits.  so do the whole thingy automatically.

The patch adds a hook in cb_alloc() that allows special tuning for the
different chipsets.  for ene just match the Echo products and set/clear the
test bits, defaults to do the same thing as w/o the patch to not break
working setups.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:09:20 +02:00
Christoph Hellwig fe8b2304e5 [SCSI] sas: fix remote phy removal
Brown paperbag bug:  sas_rphy_delete was ordered completely
wrong.  Fix it up to be the same order as sas_phy_delete or
fc_rport_terminate and fix rphy objects that leaked after module
removal.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-25 17:19:35 -05:00
Ben Dooks f04da5def8 [ARM] 2933/1: S3C2410 - fix serial port warnings
Patch from Ben Dooks

Fix the following warnings produced from
drivers/char/s3c2410.c.
drivers/serial/s3c2410.c:757: warning: 'clk' may be used uninitialized
drivers/serial/s3c2410.c:756: warning: 'clksrc' may be used uninitialized

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-25 23:02:49 +01:00
Andrew Vasquez 44550322cb [SCSI] qla2xxx: fix remote port timeout with qla2xxx driver
This patch fixes a hole in the rport unblock handling when processing
fabric events via the ADISC/PLOGI device state machine.  Original code
would not properly 'unblock' the port upon the port reloging into the
fabric.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-25 12:11:35 -05:00
James Bottomley 6f3a20242d [SCSI] allow REPORT LUN scanning even for LUN 0 PQ of 3
Currently we just ignore the device, which means there are a few
arrays out there that we don't find.

This patch updates the scsi_report_lun_scan() to take a target instead
of a device so it can be called on a return of
SCSI_SCAN_TARGET_PRESENT, which is what a PQ 3 device returns.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-25 12:01:48 -05:00
adam radford 49bfd8db4a [SCSI] 3ware 9000: Add support for 9550SX controllers
Signed-off-by: Adam Radford <linuxraid@amcc.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-25 09:36:26 -05:00
Linus Torvalds ef6bd6eb90 Merge master.kernel.org:/home/rmk/linux-2.6-ucb 2005-09-24 13:50:35 -07:00
Linus Torvalds 2e55b57a60 Merge master.kernel.org:/home/rmk/linux-2.6-serial 2005-09-24 13:49:37 -07:00
Dmitry Torokhov ff13f98b97 [PATCH] Input: check switch bitmap when matching handlers
The wwitch bitmap was added to input_device_id structure and we should
check it when matching handlers and input devices.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-24 10:44:25 -07:00
Russell King 6b9ea4213e [MFD] Fix "bious one-bit signed bitfield" errors
ucb1x00-ts declared a couple of one-bit 'int' bitfields.
Make them unsigned.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-24 10:24:37 +01:00
Russell King f993724210 [SERIAL] Remove unused variable in clps711x.c
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-24 10:12:47 +01:00
Jeff Garzik 2759c8d536 [wireless airo] remove needed dma_addr_t obfuscation
Fixes bus address truncation bug for certain configs.
2005-09-24 04:09:04 -04:00
Jeff Garzik e2e9650725 Remove WIRELESS_EXT ifdefs from several wireless drivers. 2005-09-24 04:05:52 -04:00
Jean Tourrilhes 596ff2e7c8 [PATCH] hostap: Remove iwe_stream_add_event kludge
Now that we are compiling with -fno-strict-aliasing (this is the
kernel default), we can drop the following kludge for
iwe_stream_add_event().

Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-24 03:33:51 -04:00
Jean Tourrilhes a9d12b9a4a [PATCH] hostap: Use GFP_ATOMIC to get rid of weird might_sleep issue
This is the trace I got :
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-24 03:33:51 -04:00
Jean Tourrilhes c28df16ed7 [PATCH] hostap: Add support for WE-19
This patch adds support for WE-19 to the HostAP driver. One of
the major change is the use of an explicit flag to tell if iwstat is
in dBm or not.

Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-24 03:33:51 -04:00
Pavel Roskin 7a716536c6 [PATCH] hostap: Fix pci_driver name for hostap_plx and hostap_pci
hostap_pci and hostap_plx drivers still use PCI driver names
"prism2_pci" and "prism2_plx" respectively.  This is unfriendly to
linux-wlan-ng, which uses the same names.  So, if e.g. hostap_pci and
prism2_pci are loaded, they will "share" /sys/bus/pci/drivers/prism2_plx
directory.

Change PCI driver names of hostap_pci and hostap_plx to be equal to
their module names.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-24 03:33:51 -04:00
Jeff Garzik 98ed72deeb Merge /spare/repo/linux-2.6/ 2005-09-24 00:26:49 -04:00
Jeff Garzik 8cee0cd5be [netdrvr] delete CONFIG_PHYCONTROL 2005-09-23 22:58:49 -04:00
Andy Fleming bb40dcbb0f [netdrvr gianfar] use new phy layer
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-23 22:54:21 -04:00
Linus Torvalds 87e807b6c4 Merge branch 'upstream' from master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev 2005-09-23 16:44:52 -07:00
Linus Torvalds 2ead1aa6f1 Merge branch 'upstream-fixes' from master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 2005-09-23 16:44:01 -07:00
Stephen Hemminger c886861138 [PATCH] skge: fix Yukon-Lite A0 workaround
This is one of those workarounds sucked over from sk98lin driver.
The skge driver needs to detect the Yukon-Lite A0 chip properly,
and turn of Rx FIFO Flush.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-23 19:07:12 -04:00
Jeff Garzik 536f809802 Merge /spare/repo/linux-2.6/ 2005-09-23 19:03:21 -04:00
Hironobu Ishii e7c9650843 [PATCH] ipmi_msghandler: inconsistent spin_lock usage
I found an inconsistent spin_lock usage in ipmi_smi_msg_received.

Signed-off-by: Hironobu Ishii <hishii@soft.fujitsu.com>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-23 13:35:37 -07:00
Andrew Morton 2601c2e278 [PATCH] atyfb c99 fix
- fix this:

  drivers/video/aty/xlinit.c: In function `atyfb_xl_init':
  drivers/video/aty/xlinit.c:256: warning: ISO C90 forbids mixed declarations and code

- repair some kooky coding style

- Use ARRAY_SIZE()

Cc: Tom 'spot' Callaway <tcallawa@redhat.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-23 13:35:36 -07:00
Karsten Keil a3b5f0d438 [PATCH] hisax: remove URB_ASYNC_UNLINK
usb_unlink_urb is always async now, so URB_ASYNC_UNLINK was removed from
core USB and we must do as well.

Signed-off-by: Karsten Keil <kkeil@suse.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-23 13:35:36 -07:00
Ivan Kokshaysky 12f44f46bc [PATCH] pci: fixup parent subordinate busnr
I believe the change that broke things is introduction of
pci_fixup_parent_subordinate_busnr().

The patch here does two things:
- hunk #1 should fix the problems you've seen when you boot without
  additional "pci" kernel options;
- hunk #2 supposedly fixes boot with "pci=assign-busses" option which
  otherwise hangs Acer TM81xx machines as reported.

Please try this with and without "pci=assign-busses". If it boots,
I'd like to see 'lspci -vvx' for both cases.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-23 08:05:16 -07:00
Paul Gortmaker 9389d79fbf [PATCH] 8390 Tx fix for non i386 machines
While this is true, E8390_CMD is zero on i386, and thus there should be no
effect for these machines.  Machines like Mac, Amiga etc. which use Alan's
clever register mapping may have a non-zero E8390_CMD and result in bogus
"transmitter busy" type messages from this bug.

Fixes BUG# 3991.
2005-09-23 05:18:45 -04:00
Pavel Roskin acc4b985a6 [PATCH] orinoco: Bump version to 0.15rc3.
Signed-off-by: Pavel Roskin <proski@gnu.org>

Bump version to 0.15rc3.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-23 04:36:14 -04:00
Pavel Roskin 48ca703807 [PATCH] orinoco: Read only needed data in __orinoco_ev_txexc().
Signed-off-by: Pavel Roskin <proski@gnu.org>

Read only needed data in __orinoco_ev_txexc().

Don't read the 802.11 header beyond addr1.  The rest of the frame is not
used currently.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-23 04:36:13 -04:00
Pavel Roskin d133ae4cd6 [PATCH] orinoco: Annotate endianess of variables and structure members.
Signed-off-by: Pavel Roskin <proski@gnu.org>

Annotate endianess of variables and structure members.

Don't reuse variables for both host-endian and little-endian data.
Minor comment changes in affected structures.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-23 04:36:13 -04:00
Pavel Roskin 393da59834 [PATCH] orinoco: Remove unneeded forward declarations.
Signed-off-by: Pavel Roskin <proski@gnu.org>

Remove unneeded forward declarations.

Also reorder struct pcmcia_driver initialization to keep attach and
detach together.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-23 04:36:13 -04:00
Pavel Roskin 8aeabc3750 [PATCH] orinoco: orinoco_send_wevents() could return without unlocking.
Signed-off-by: Pavel Roskin <proski@gnu.org>

orinoco_send_wevents() could return without unlocking.

Failure to read BSSID from the hardware would cause orinoco_send_wevents() to
return with lock held.  Found by sparse.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-23 04:36:13 -04:00
Pavel Roskin f3cb4cc120 [PATCH] orinoco: Fix memory leak and unneeded unlock in orinoco_join_ap()
Signed-off-by: Pavel Roskin <proski@gnu.org>

Fix memory leak and unneeded unlock in orinoco_join_ap()

If orinoco_lock() fails, the code would still run orinoco_unlock(),
instead of freeing the allocated memory.  Found by sparse.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-23 04:36:13 -04:00
Pavel Roskin 4c08202547 [PATCH] orinoco: Make nortel_pci_hw_init() static.
Signed-off-by: Pavel Roskin <proski@gnu.org>

Make nortel_pci_hw_init() static.

Found by sparse.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-23 04:36:13 -04:00
Pavel Roskin ef846bf04f [PATCH] orinoco: Remove inneeded system includes.
Signed-off-by: Pavel Roskin <proski@gnu.org>

Remove inneeded system includes.

Most system includes are not needed.  In particular, the hardware
backends don't need anything network related.  Some includes have been
moved from local headers to the C files where they are actually used.
Includes that have to be in the local headers are no longer from the C
sources.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-23 04:36:13 -04:00
Benjamin Herrenschmidt 0cdc82ee1a [PATCH] mesh scsi: fix error handling
The PowerMac mesh SCSI driver had some missing error handling which would
trigger warnings due to lack of handling of return value from
scsi_add_host.  This fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 22:17:36 -07:00
Benjamin Herrenschmidt 0365ba7fb1 [PATCH] ppc64: SMU driver update & i2c support
The SMU is the "system controller" chip used by Apple recent G5 machines
including the iMac G5.  It drives things like fans, i2c busses, real time
clock, etc...

The current kernel contains a very crude driver that doesn't do much more
than reading the real time clock synchronously.  This is a completely
rewritten driver that provides interrupt based command queuing, a userland
interface, and an i2c/smbus driver for accessing the devices hanging off
the SMU i2c busses like temperature sensors.  This driver is a basic block
for upcoming work on thermal control for those machines, among others.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 22:17:35 -07:00
Robert Love 4c87b74c72 [PATCH] hdaps: small update.
- Handle dmi_system_check() elegantly, now that my bugfix is upstream.

- Add support for the X41 and R52.

- Cleanup some comments do I do not have to keep updating them with each
  new whitelisted laptop.

Signed-off-by: Robert Love <rml@novell.com>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 22:17:34 -07:00
Keir Fraser 609725f877 [PATCH] Fix mmap() of /dev/hpet
The address passed to io_remap_pfn_range() in hpet_mmap() does not need to
be converted using __pa(): it is already a physical address.  This bug was
found and the patch suggested by Clay Harris.

I introduced this particular bug when making io_remap_pfn_range changes a
few months ago.  In fact mmap()ing /dev/hpet has *never* previously worked:
before my changes __pa() was being executed on an ioremap()ed virtual
address, which is also invalid.

Signed-off-by: Keir Fraser <keir@xensource.com>
Cc: Robert Picco <Robert.Picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 22:17:34 -07:00
Grant Coady 66c81f0059 [PATCH] DEBUG redefined in drivers/mtd/devices/docecc.c
Fix namespace clash:

drivers/mtd/devices/docecc.c:43:1: warning: "DEBUG" redefined
In file included from drivers/mtd/devices/docecc.c:40:
include/linux/mtd/mtd.h:219:1: warning: this is the location of the previous definition

Signed-off-by: Grant Coady <gcoady@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 22:17:34 -07:00
Bernd Petrovitsch e1e70a262d [PATCH] Rename vprintk define in bttpvp.h
Rename the (apparently) bttv intern #define vprintk to verbprintk to
resolve a name clash.

Reason: vprintk() is defined in include/linux/kernel.h similar to printk
but with a va_list argument.

(akpm: I changed it to bttv_printk)

Cc: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 22:17:34 -07:00
Jeff Garzik da192bb50c Merge /spare/repo/linux-2.6/ 2005-09-22 15:43:14 -04:00
James Ketrenos af9288a707 ieee80211: update orinoco, wl3501 drivers for latest struct naming 2005-09-22 15:43:07 -04:00
Pete Zaitcev c6c88834b2 [PATCH] ub: Comment out unconditional stall clear
This code appears to be more trouble than it's worth, considering that
no normal users reload drivers. So, we comment it for now. It is not
removed outright for the benefit of hackers (that is, myself).

Signed-off-by: Pete Zaitcev <zaitcev@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:26 -07:00
David Hollis 3a8c1e2910 [PATCH] USB: Add Novatel CDMA Wireless PC card IDs to airprime
USB: Add device id's for Novatel Wireless CDMA wireless PC card.
     The Novatel CDMA card behaves the same as the AirPrime by providing
     a USB serial port.

Signed-off-by: David Hollis <dhollis@davehollis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:26 -07:00
Matthias Urlichs b27c73dcab [PATCH] usb/serial/option.c: Increase input buffer size
The card sometimes sends >2000 bytes in one single chunk. Ouch.

Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:26 -07:00
Kevin Vigor a85a46f2c3 [PATCH] USB: fix pegasus driver
Addresses some small bugs in the pegasus ethernet-over-USB driver.
Specifically, malformed long packets from the adapter could cause a kernel
panic; the interrupt interval calculation was inappropriate for high-speed
devices; the return code from read_mii_word was tested incorrectly; and
failure to unlink outstanding URBs before freeing them could lead to kernel
panics when unloading the driver.

Signed-off-by: Kevin Vigor <kevin@realmsys.com>
Cc: Petko Manolov <petkan@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:26 -07:00
David Brownell 4b2e790a4d [PATCH] USB: sl811-hcd minor fixes
Three minor sl811-hcd fixes:

 - Elminate memory leak on one (rare) disable/shutdown path.

 - For periodic transfers that don't need to be scheduled, update
   urb->start_frame to represent the transfer phase correctly.

 - Report the (single) port as removable, by default.

Since no drivers yet use start_frame or that part of the hub descriptor,
only that leak is likely to ever matter.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

 drivers/usb/host/sl811-hcd.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
2005-09-22 07:58:25 -07:00
Richard Purdie 2ba08e825e [PATCH] USB: fix pxa2xx_udc compile warnings
This patch fixes several types in the PXA25x udc driver and hence fixes
several compiler warnings.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:25 -07:00
Peter Favrholdt 72a755fce0 [PATCH] USB: ftdi_sio: allow baud rate to be changed without raising RTS and DTR
I'm using a 2 port USB RS232 dongle to connect to a serial-IR cradle for
a bar code reader). Detecting the baudrate of the serial-IR involves
keeping DTR low while changing baudrate.

This works using normal 16550A serial ports as well as the FTDI driver
version 1.4.0 (Linux 2.6.8) but stopped working with the change to
"ensure RTS and DTR are raised when changing baudrate" introduced in
version 1.4.1 (Linux 2.6.9).

The attached patch fixes this, so RTS and DTR is only raised when
changing baudrate iff the previous baudrate was B0.

Signed-off-by: Peter Favrholdt <pfavr@how.dk>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:25 -07:00
Matthias Urlichs b6137383bd [PATCH] USB: more device IDs for Option card driver
Added support for HUAWEI E600 and Audiovox AirCard

User reports say that these devices work without driver modification.

Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:25 -07:00
Pete Zaitcev 64bd84538a [PATCH] ub: fix burning cds
This patch fixes a few problems with ub and cleans up a couple of things:

 - Bump UB_MAX_REQ_SG, this allows to burn CDs
 - Drop initialization of urb.transfer_flags,
   now that URB_UNLINK_ASYNC is gone
 - Add forgotten processing of stalls at GetMaxLUN
 - Remove a few more P3-tagged printks whose time has come
 - Correct comment about ZIP-100

Signed-off-by: Pete Zaitcev <zaitcev@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

 drivers/block/ub.c |   53 +++++++++++++++++++++++++++--------------------------
 1 file changed, 27 insertions(+), 26 deletions(-)
2005-09-22 07:58:25 -07:00
Linda Xie 02fe75a9ad [PATCH] PCI Hotplug: Fix buffer overrun in rpadlpar_sysfs.c
Signed-off-by: Linda Xie <lxie@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:25 -07:00
Amos Waterland 3c6de9295d [PATCH] fix drivers/pci/probe.c warning
This function expects an unsigned 32-bit type as its third argument:

 static u32 pci_size(u32 base, u32 maxbase, u32 mask)

However, given these definitions:

 #define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL)
 #define PCI_ROM_ADDRESS_MASK (~0x7ffUL)

these two calls in drivers/pci/probe.c are problematic for architectures
for which a UL is not equivalent to a u32:

 sz = pci_size(l, sz, PCI_BASE_ADDRESS_MEM_MASK);
 sz = pci_size(l, sz, PCI_ROM_ADDRESS_MASK);

Hence the below compile warning when building for ARCH=ppc64:

 drivers/pci/probe.c: In function `pci_read_bases':
 /.../probe.c:168: warning: large integer implicitly truncated to unsigned type
 /.../probe.c:218: warning: large integer implicitly truncated to unsigned type

Here is a simple fix.

Signed-off-by: Amos Waterland <apw@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:25 -07:00
Pekka Enberg 656da9da37 [PATCH] PCI: convert kcalloc to kzalloc
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:24 -07:00
Bjorn Helgaas 1029d6b58a [PATCH] PCI: remove unused "scratch"
Unused variable.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:24 -07:00
Bill Nottingham 3e51377dc4 [PATCH] fix class symlinks in sysfs
The class symlinks in sysfs don't properly handle changing device names.

To demonstrate, rename your network device from eth0 to eth1. Your
pci (or usb, or whatever) device will still have a 'net:eth0' link,
except now it points to /sys/class/net/eth1.

The attached patch makes sure the class symlink name changes when
the class device name changes. It isn't 100% correct, it should be
using sysfs_rename_link. Unfortunately, sysfs_rename_link doesn't exist.

Signed-off-by: Bill Nottingham <notting@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:24 -07:00
Daniel Ritz d305ef5d2a [PATCH] driver core: add helper device_is_registered()
add the helper and use it instead of open coding the klist_node_attached() check
(which is a layering violation IMHO)

idea by Alan Stern.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:24 -07:00
Daniel Ritz 4c898c7f2f [PATCH] Driver Core: fis bus rescan devices race
bus_rescan_devices_helper() does not hold the dev->sem when it checks for
!dev->driver().  device_attach() holds the sem, but calls again
device_bind_driver() even when dev->driver is set.

What happens is that a first device_attach() call (module insertion time)
is on the way binding the device to a driver.  Another thread calls
bus_rescan_devices().  Now when bus_rescan_devices_helper() checks for
dev->driver it is still NULL 'cos the the prior device_attach() is not yet
finished.  But as soon as the first one releases the dev->sem the second
device_attach() tries to rebind the already bound device again.
device_bind_driver() does this blindly which leads to a corrupt
driver->klist_devices list (the device links itself, the head points to the
device).  Later a call to device_release_driver() sets dev->driver to NULL
and breaks the link it has to itself on knode_driver.  Rmmoding the driver
later calls driver_detach() which leads to an endless loop 'cos the list
head in klist_devices still points to the device.  And since dev->driver is
NULL it's stuck with the same device forever.  Boom.  And rmmod hangs.

Very easy to reproduce with new-style pcmcia and a 16bit card.  Just loop
modprobe <pcmcia-modules> ;cardctl eject; rmmod <card driver, pcmcia
modules>.

Easiest fix is to check if the device is already bound to a driver in
device_bind_driver().  This avoids the double binding.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:24 -07:00
Manfred Spraul 8a4ae7f2e2 forcedeth: add hardware tx checksumming
Recent forcedeth nics support checksum offloading for tx.

The attached patch, written by Ayaz Abdulla, adds the support to the
driver.

It also cleans up the handling of the three dma ring entry formats that
are supported by the driver.

Signed-off-By: Manfred Spraul <manfred@colorfullife.com>
Signed-off-By: Jeff Garzik <jgarzik@pobox.com>
2005-09-21 23:22:10 -04:00
James Ketrenos 5bfc819b53 [PATCH] ieee80211: Updated hostap to be compatible with extra_prefix_len changes
tree 8c1676c8a15c08e6d4c718fc7cd42d9bf4cd8235
parent 0ccc3dd6469ed492578c184f47dde2baccde3593
author James Ketrenos <jketreno@linux.intel.com> 1126715240 -0500
committer James Ketrenos <jketreno@linux.intel.com> 1127316717 -0500

Updated hostap to be compatible with extra_prefix_len changes.

Accomplished via:

for i in hostap_ap.c hostap_80211_tx.c; do
        sed -i -e "s:\([.>]\)extra_prefix_len:\1extra_mpdu_prefix_len:g" \
                -e "s:\([.>]\)extra_postfix_len:\1extra_mpdu_postfix_len:g" \
                drivers/net/wireless/hostap/$i
done

CC: Jouni Malinen <jkmaline@cc.hut.fi>

Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21 23:07:15 -04:00
James Ketrenos d041674d62 [PATCH] ieee80211: Updated hostap to be compatible with ieee80211_hdr changes
tree 8ec97d9056ceaf0f845ed51175dd842b700baadd
parent 329128457008ace3110c96971addf85a767dd5af
author James Ketrenos <jketreno@linux.intel.com> 1126714484 -0500
committer James Ketrenos <jketreno@linux.intel.com> 1127316636 -0500

Updated hostap to be compatible with ieee80211_hdr changes.

Change accomplished via:

for i in hostap_ap.{c,h} hostap_80211_{t,r}x.c; do
	sed -i -e "s:ieee80211_hdr\([^_]\):ieee80211_hdr_4addr\1:g" \
		drivers/net/wireless/hostap/$i
done

CC: Jouni Malinen <jkmaline@cc.hut.fi>

Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21 23:07:15 -04:00
James Ketrenos 4ca5253d57 [PATCH] ieee80211: Updated atmel to be compatible with ieee80211_hdr changes
tree d7be83000b058b14450d76f99c432b1fb2a1c177
parent 322201093e03830fceedfc24931420b1ea855a8c
author James Ketrenos <jketreno@linux.intel.com> 1127316330 -0500
committer James Ketrenos <jketreno@linux.intel.com> 1127316330 -0500

Updated atmel to be compatible with ieee80211_hdr changes.

Change accomplished via:

sed -i -e "s:ieee80211_hdr\([^_]\):ieee80211_hdr_4addr\1:g" \
	drivers/net/wireless/atmel.c

Compile tested only.

CC: simon@thekelleys.org.uk

Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21 23:00:58 -04:00
James Ketrenos c8d42d1ae4 [PATCH] ieee80211: Updated ipw2200 to be compatible with ieee80211's hard_start_xmit change.
tree 713b6ff3311decfe42d5209f7b2508736d144b85
parent 6465beff0e89779330450dffc2a5e6dc5154eebf
author James Ketrenos <jketreno@linux.intel.com> 1126716726 -0500
committer James Ketrenos <jketreno@linux.intel.com> 1127316162 -0500

Updated ipw2200 to be compatible with ieee80211's hard_start_xmit change.

Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21 23:00:57 -04:00
James Ketrenos 0dacca1f0a [PATCH] ieee80211: Updated ipw2200 to be compatible with ieee80211_hdr changes
tree 9f86c7b4f59249c05c96c360dfaa817995e8a44f
parent 9b09701b2c6254f2fddb009004a14eb5a908714f
author James Ketrenos <jketreno@linux.intel.com> 1126714305 -0500
committer James Ketrenos <jketreno@linux.intel.com> 1127316074 -0500

Updated ipw2200 to be compatible with ieee80211_hdr changes.

Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21 23:00:57 -04:00
James Ketrenos 3a5becf720 [PATCH] ieee80211: Updated ipw2100 to be compatible with ieee80211's hard_start_xmit change
tree ee48cbe413b795d6be454b9baf4f3bd3d74814cb
parent 49856b147763bd6847e0d8f53aee1ddd61385638
author James Ketrenos <jketreno@linux.intel.com> 1126716634 -0500
committer James Ketrenos <jketreno@linux.intel.com> 1127316024 -0500

Updated ipw2100 to be compatible with ieee80211's hard_start_xmit change.

Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21 23:00:57 -04:00
James Ketrenos 99a4b232b6 [PATCH] ieee80211: Updated ipw2100 to be compatible with ieee80211_hdr changes
tree 992b203395c50342f1cced415acae6177344e270
parent c59bb604a2ff4e40232ff0422e7adc44e3b007a0
author James Ketrenos <jketreno@linux.intel.com> 1126714006 -0500
committer James Ketrenos <jketreno@linux.intel.com> 1127315910 -0500

Updated ipw2100 to be compatible with ieee80211_hdr changes.

Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21 23:00:57 -04:00
Andy Currid e86ee6682b [PATCH] Add NVIDIA device ID in sata_nv
Signed-off-by: Andy Currid <acurrid@nvidia.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21 22:52:19 -04:00
Tommy Christensen 0b50f81d5a [PATCH] r8169: call proper VLAN receive function
vlan_hwaccel_rx should be used when in interrupt context.

Fixes bug  http://bugzilla.kernel.org/show_bug.cgi?id=5284

Signed-off-by: Tommy S. Christensen <tommy.christensen@tpack.net>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21 22:49:07 -04:00
Jeff Garzik a3536c839f Merge /spare/repo/linux-2.6/ 2005-09-21 22:34:08 -04:00
Stephen Hemminger 383181ac7e [PATCH] skge: check length from PHY
Cleanup receive buffer allocation and management,
Add more error handling checks from PHY and bump version.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21 22:32:50 -04:00
Stephen Hemminger c3f8be9618 [PATCH] skge: expand ethtool debug register dump
Expand the returned data for ethtool debug access to include
all of the mapped PCI area; except for the small set of registers
that are for diagnostic RAM access. Access to those registers
will hang the system.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21 22:32:50 -04:00
nsxfreddy@gmail.com 552709d5ae [PATCH] bonding: Fix link monitor capability check (was skge: set mac address oops with bonding)
Fix bond_enslave link monitoring warning to check use_carrier status
and ethtool_ops in addition to do_ioctl.  This version checks ethtool_ops
as well as do_ioctl, and also uses the per-bond params.use_carrier
instead of the global use_carrier.

Signed-off-by: Jason R. Martin <nsxfreddy@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21 22:23:13 -04:00
Linus Torvalds f62378fcfc Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-09-21 14:30:37 -07:00
Andrew Morton 68ce1eb540 [SCSI] lpfc build fix
gcc-2.95.x doesn't do anonymous unions.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-21 16:25:46 -05:00
Linus Torvalds a418500b42 Merge master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband 2005-09-21 13:21:35 -07:00
Hal Rosenstock f2065e4242 [IB] Fix RMPP receive length calculation
Based on simplification idea from Sean Hefty <sean.hefty@intel.com>

Signed-off-by: Hal Rosenstock <halr@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-21 12:33:09 -07:00
Sean Hefty 972d512a17 [IB] Add MAD data field size definitions
Clean up code by using enums instead of hard-coded magic numbers.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-21 12:31:26 -07:00
Deepak Saxena 8b20f6da20 [PATCH] Fix I2O config-osm init to return proper error
We currently unregister the config-osm driver if initialization of the
legacy ioctl() handlers failed but still return success.  We should be
returning -EBUSY in this case.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-21 10:11:54 -07:00
Christoph Hellwig bbcc6bee9e [PATCH] remove blkdev_scsi_issue_flush_fn again
This function was removed a while ago, but crept in again via a recent
scsi merge.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-21 10:11:54 -07:00