Commit Graph

35 Commits

Author SHA1 Message Date
Gary Hade c04fc586c1 mm: show node to memory section relationship with symlinks in sysfs
Show node to memory section relationship with symlinks in sysfs

Add /sys/devices/system/node/nodeX/memoryY symlinks for all
the memory sections located on nodeX.  For example:
/sys/devices/system/node/node1/memory135 -> ../../memory/memory135
indicates that memory section 135 resides on node1.

Also revises documentation to cover this change as well as updating
Documentation/ABI/testing/sysfs-devices-memory to include descriptions
of memory hotremove files 'phys_device', 'phys_index', and 'state'
that were previously not described there.

In addition to it always being a good policy to provide users with
the maximum possible amount of physical location information for
resources that can be hot-added and/or hot-removed, the following
are some (but likely not all) of the user benefits provided by
this change.
Immediate:
  - Provides information needed to determine the specific node
    on which a defective DIMM is located.  This will reduce system
    downtime when the node or defective DIMM is swapped out.
  - Prevents unintended onlining of a memory section that was
    previously offlined due to a defective DIMM.  This could happen
    during node hot-add when the user or node hot-add assist script
    onlines _all_ offlined sections due to user or script inability
    to identify the specific memory sections located on the hot-added
    node.  The consequences of reintroducing the defective memory
    could be ugly.
  - Provides information needed to vary the amount and distribution
    of memory on specific nodes for testing or debugging purposes.
Future:
  - Will provide information needed to identify the memory
    sections that need to be offlined prior to physical removal
    of a specific node.

Symlink creation during boot was tested on 2-node x86_64, 2-node
ppc64, and 2-node ia64 systems.  Symlink creation during physical
memory hot-add tested on a 2-node x86_64 system.

Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:00 -08:00
Rusty Russell 29c0177e6a cpumask: change cpumask_scnprintf, cpumask_parse_user, cpulist_parse, and cpulist_scnprintf to take pointers.
Impact: change calling convention of existing cpumask APIs

Most cpumask functions started with cpus_: these have been replaced by
cpumask_ ones which take struct cpumask pointers as expected.

These four functions don't have good replacement names; fortunately
they're rarely used, so we just change them over.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: paulus@samba.org
Cc: mingo@redhat.com
Cc: tony.luck@intel.com
Cc: ralf@linux-mips.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: cl@linux-foundation.org
Cc: srostedt@redhat.com
2008-12-13 21:20:25 +10:30
Lee Schermerhorn af936a1606 vmscan: unevictable LRU scan sysctl
This patch adds a function to scan individual or all zones' unevictable
lists and move any pages that have become evictable onto the respective
zone's inactive list, where shrink_inactive_list() will deal with them.

Adds sysctl to scan all nodes, and per node attributes to individual
nodes' zones.

Kosaki: If evictable page found in unevictable lru when write
/proc/sys/vm/scan_unevictable_pages, print filename and file offset of
these pages.

[akpm@linux-foundation.org: fix one CONFIG_MMU=n build error]
[kosaki.motohiro@jp.fujitsu.com: adapt vmscan-unevictable-lru-scan-sysctl.patch to new sysfs API]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:31 -07:00
Nick Piggin 5344b7e648 vmstat: mlocked pages statistics
Add NR_MLOCK zone page state, which provides a (conservative) count of
mlocked pages (actually, the number of mlocked pages moved off the LRU).

Reworked by lts to fit in with the modified mlock page support in the
Reclaim Scalability series.

[kosaki.motohiro@jp.fujitsu.com: fix incorrect Mlocked field of /proc/meminfo]
[lee.schermerhorn@hp.com: mlocked-pages: add event counting with statistics]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:31 -07:00
Lee Schermerhorn 7b854121eb Unevictable LRU Page Statistics
Report unevictable pages per zone and system wide.

Kosaki Motohiro added support for memory controller unevictable
statistics.

[riel@redhat.com: fix printk in show_free_areas()]
[akpm@linux-foundation.org: fix units in /proc/vmstats]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Debugged-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:50:26 -07:00
Rik van Riel 4f98a2fee8 vmscan: split LRU lists into anon & file sets
Split the LRU lists in two, one set for pages that are backed by real file
systems ("file") and one for pages that are backed by memory and swap
("anon").  The latter includes tmpfs.

The advantage of doing this is that the VM will not have to scan over lots
of anonymous pages (which we generally do not want to swap out), just to
find the page cache pages that it should evict.

This patch has the infrastructure and a basic policy to balance how much
we scan the anon lists and how much we scan the file lists.  The big
policy changes are in separate patches.

[lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset]
[kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru]
[kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page]
[hugh@veritas.com: memcg swapbacked pages active]
[hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED]
[akpm@linux-foundation.org: fix /proc/vmstat units]
[nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration]
[kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo]
[kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()]
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:50:25 -07:00
Andi Kleen 4a0b2b4dbe sysdev: Pass the attribute to the low level sysdev show/store function
This allow to dynamically generate attributes and share show/store
functions between attributes. Right now most attributes are generated
by special macros and lots of duplicated code. With the attribute
passed it's instead possible to attach some data to the attribute
and then use that in shared low level functions to do different things.

I need this for the dynamically generated bank attributes in the x86
machine check code, but it'll allow some further cleanups.

I converted all users in tree to the new show/store prototype. It's a single
huge patch to avoid unbisectable sections.

Runtime tested: x86-32, x86-64
Compiled only: ia64, powerpc
Not compile tested/only grep converted: sh, arm, avr32

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:55:02 -07:00
John Blackwood 2d5c1be887 mm: switch node meminfo Active & Inactive pages to Kbytes
There is a bug in the output of /sys/devices/system/node/node[n]/meminfo
where the Active and Inactive values are in pages instead of Kbytes.

Looks like this occurred back in 2.6.20 when the code was changed
over to use node_page_state().

Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04 10:40:09 -07:00
Miklos Szeredi fc3ba692a4 mm: Add NR_WRITEBACK_TEMP counter
Fuse will use temporary buffers to write back dirty data from memory mappings
(normal writes are done synchronously).  This is needed, because there cannot
be any guarantee about the time in which a write will complete.

By using temporary buffers, from the MM's point if view the page is written
back immediately.  If the writeout was due to memory pressure, this
effectively migrates data from a full zone to a less full zone.

This patch adds a new counter (NR_WRITEBACK_TEMP) for the number of pages used
as temporary buffers.

[Lee.Schermerhorn@hp.com: add vmstat_text for NR_WRITEBACK_TEMP]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:50 -07:00
Mike Travis 39106dcf85 cpumask: use new cpus_scnprintf function
* Cleaned up references to cpumask_scnprintf() and added new
    cpulist_scnprintf() interfaces where appropriate.

  * Fix some small bugs (or code efficiency improvments) for various uses
    of cpumask_scnprintf.

  * Clean up some checkpatch errors.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:44:59 +02:00
Mike Travis c5f59f0833 nodemask: use new node_to_cpumask_ptr function
* Use new node_to_cpumask_ptr.  This creates a pointer to the
    cpumask for a given node.  This definition is in mm patch:

	asm-generic-add-node_to_cpumask_ptr-macro.patch

  * Use new set_cpus_allowed_ptr function.

Depends on:
	[mm-patch]: asm-generic-add-node_to_cpumask_ptr-macro.patch
	[sched-devel]: sched: add new set_cpus_allowed_ptr function
	[x86/latest]: x86: add cpus_scnprintf function

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Greg Banks <gnb@melbourne.sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:44:59 +02:00
Kay Sievers af5ca3f4ec Driver core: change sysdev classes to use dynamic kobject names
All kobjects require a dynamically allocated name now. We no longer
need to keep track if the name is statically assigned, we can just
unconditionally free() all kobject names on cleanup.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00
Lee Schermerhorn bde631a518 mm: add node states sysfs class attributeS
Add a per node state sysfs class attribute file to /sys/devices/system/node
to display node state masks.

E.g., on a 4-cell HP ia64 NUMA platform, we have 5 nodes: 4 representing
the actual hardware cells and one memory-only pseudo-node representing a
small amount [512MB] of "hardware interleaved" memory.  With this patch, in
/sys/devices/system/node we see:

#ls -1F /sys/devices/system/node
has_cpu
has_normal_memory
node0/
node1/
node2/
node3/
node4/
online
possible
#cat /sys/devices/system/node/possible
0-255
#cat /sys/devices/system/node/online
0-4
#cat /sys/devices/system/node/has_normal_memory
0-4
#cat /sys/devices/system/node/has_cpu
0-3

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:03 -07:00
Robert P. J. Day 405ae7d381 Replace remaining references to "driverfs" with "sysfs".
Globally, s/driverfs/sysfs/g.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 19:13:42 +01:00
Christoph Lameter 05a0416be2 [PATCH] Drop __get_zone_counts()
Values are readily available via ZVC per node and global sums.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:18 -08:00
Christoph Lameter 972d1a7b14 [PATCH] ZVC: Support NR_SLAB_RECLAIMABLE / NR_SLAB_UNRECLAIMABLE
Remove the atomic counter for slab_reclaim_pages and replace the counter
and NR_SLAB with two ZVC counter that account for unreclaimable and
reclaimable slab pages: NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE.

Change the check in vmscan.c to refer to to NR_SLAB_RECLAIMABLE.  The
intend seems to be to check for slab pages that could be freed.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:51 -07:00
Christoph Lameter 182e8e2373 [PATCH] reduce MAX_NR_ZONES: make display of highmem counters conditional on CONFIG_HIGHMEM
Do not display HIGHMEM memory sizes if CONFIG_HIGHMEM is not set.

Make HIGHMEM dependent texts and make display of highmem counters optional

Some texts are depending on CONFIG_HIGHMEM.

Remove those strings and remove the display of highmem counter values if
CONFIG_HIGHMEM is not set.

[akpm@osdl.org: remove some ifdefs]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:46 -07:00
Andrew Morton f5ef68da5f [PATCH] /proc/meminfo: don't put spaces in names
None of the other /proc/meminfo lines have a space in the identifier.  This
post-2.6.17 addition has the potential to break existing parsers, so use an
underscore instead (like Committed_AS).

Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27 11:01:33 -07:00
Christoph Lameter ca889e6c45 [PATCH] Use Zoned VM Counters for NUMA statistics
The numa statistics are really event counters.  But they are per node and
so we have had special treatment for these counters through additional
fields on the pcp structure.  We can now use the per zone nature of the
zoned VM counters to realize these.

This will shrink the size of the pcp structure on NUMA systems.  We will
have some room to add additional per zone counters that will all still fit
in the same cacheline.

 Bits	Prior pcp size	  	Size after patch	We can add
 ------------------------------------------------------------------
 64	128 bytes (16 words)	80 bytes (10 words)	48
 32	 76 bytes (19 words)	56 bytes (14 words)	8 (64 byte cacheline)
							72 (128 byte)

Remove the special statistics for numa and replace them with zoned vm
counters.  This has the side effect that global sums of these events now
show up in /proc/vmstat.

Also take the opportunity to move the zone_statistics() function from
page_alloc.c into vmstat.c.

Discussions:
V2 http://marc.theaimsgroup.com/?t=115048227000002&r=1&w=2

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 11:25:36 -07:00
Christoph Lameter d2c5e30c9a [PATCH] zoned vm counters: conversion of nr_bounce to per zone counter
Conversion of nr_bounce to a per zone counter

nr_bounce is only used for proc output.  So it could be left as an event
counter.  However, the event counters may not be accurate and nr_bounce is
categorizing types of pages in a zone.  So we really need this to also be a
per zone counter.

[akpm@osdl.org: bugfix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 11:25:36 -07:00
Christoph Lameter fd39fc8561 [PATCH] zoned vm counters: conversion of nr_unstable to per zone counter
Conversion of nr_unstable to a per zone counter

We need to do some special modifications to the nfs code since there are
multiple cases of disposition and we need to have a page ref for proper
accounting.

This converts the last critical page state of the VM and therefore we need to
remove several functions that were depending on GET_PAGE_STATE_LAST in order
to make the kernel compile again.  We are only left with event type counters
in page state.

[akpm@osdl.org: bugfixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 11:25:36 -07:00
Christoph Lameter ce866b34ae [PATCH] zoned vm counters: conversion of nr_writeback to per zone counter
Conversion of nr_writeback to per zone counter.

This removes the last page_state counter from arch/i386/mm/pgtable.c so we
drop the page_state from there.

[akpm@osdl.org: bugfix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 11:25:35 -07:00
Christoph Lameter b1e7a8fd85 [PATCH] zoned vm counters: conversion of nr_dirty to per zone counter
This makes nr_dirty a per zone counter.  Looping over all processors is
avoided during writeback state determination.

The counter aggregation for nr_dirty had to be undone in the NFS layer since
we summed up the page counts from multiple zones.  Someone more familiar with
NFS should probably review what I have done.

[akpm@osdl.org: bugfix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 11:25:35 -07:00
Christoph Lameter df849a1529 [PATCH] zoned vm counters: conversion of nr_pagetables to per zone counter
Conversion of nr_page_table_pages to a per zone counter

[akpm@osdl.org: bugfix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 11:25:35 -07:00
Christoph Lameter 9a865ffa34 [PATCH] zoned vm counters: conversion of nr_slab to per zone counter
- Allows reclaim to access counter without looping over processor counts.

- Allows accurate statistics on how many pages are used in a zone by
  the slab. This may become useful to balance slab allocations over
  various zones.

[akpm@osdl.org: bugfix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 11:25:35 -07:00
Christoph Lameter f3dbd34460 [PATCH] zoned vm counters: split NR_ANON_PAGES off from NR_FILE_MAPPED
The current NR_FILE_MAPPED is used by zone reclaim and the dirty load
calculation as the number of mapped pagecache pages.  However, that is not
true.  NR_FILE_MAPPED includes the mapped anonymous pages.  This patch
separates those and therefore allows an accurate tracking of the anonymous
pages per zone.

It then becomes possible to determine the number of unmapped pages per zone
and we can avoid scanning for unmapped pages if there are none.

Also it may now be possible to determine the mapped/unmapped ratio in
get_dirty_limit.  Isnt the number of anonymous pages irrelevant in that
calculation?

Note that this will change the meaning of the number of mapped pages reported
in /proc/vmstat /proc/meminfo and in the per node statistics.  This may affect
user space tools that monitor these counters!  NR_FILE_MAPPED works like
NR_FILE_DIRTY.  It is only valid for pagecache pages.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 11:25:35 -07:00
Christoph Lameter 347ce434d5 [PATCH] zoned vm counters: conversion of nr_pagecache to per zone counter
Currently a single atomic variable is used to establish the size of the page
cache in the whole machine.  The zoned VM counters have the same method of
implementation as the nr_pagecache code but also allow the determination of
the pagecache size per zone.

Remove the special implementation for nr_pagecache and make it a zoned counter
named NR_FILE_PAGES.

Updates of the page cache counters are always performed with interrupts off.
We can therefore use the __ variant here.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 11:25:34 -07:00
Christoph Lameter 65ba55f500 [PATCH] zoned vm counters: convert nr_mapped to per zone counter
nr_mapped is important because it allows a determination of how many pages of
a zone are not mapped, which would allow a more efficient means of determining
when we need to reclaim memory in a zone.

We take the nr_mapped field out of the page state structure and define a new
per zone counter named NR_FILE_MAPPED (the anonymous pages will be split off
from NR_MAPPED in the next patch).

We replace the use of nr_mapped in various kernel locations.  This avoids the
looping over all processors in try_to_free_pages(), writeback, reclaim (swap +
zone reclaim).

[akpm@osdl.org: bugfix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 11:25:34 -07:00
KAMEZAWA Hiroyuki 76b67ed9dc [PATCH] node hotplug: register cpu: remove node struct
With Goto-san's patch, we can add new pgdat/node at runtime.  I'm now
considering node-hot-add with cpu + memory on ACPI.

I found acpi container, which describes node, could evaluate cpu before
memory. This means cpu-hot-add occurs before memory hot add.

In most part, cpu-hot-add doesn't depend on node hot add.  But register_cpu(),
which creates symbolic link from node to cpu, requires that node should be
onlined before register_cpu().  When a node is onlined, its pgdat should be
there.

This patch-set holds off creating symbolic link from node to cpu
until node is onlined.

This removes node arguments from register_cpu().

Now, register_cpu() requires 'struct node' as its argument.  But the array of
struct node is now unified in driver/base/node.c now (By Goto's node hotplug
patch).  We can get struct node in generic way.  So, this argument is not
necessary now.

This patch also guarantees add cpu under node only when node is onlined.  It
is necessary for node-hot-add vs.  cpu-hot-add patch following this.

Moreover, register_cpu calculates cpu->node_id by cpu_to_node() without regard
to its 'struct node *root' argument.  This patch removes it.

Also modify callers of register_cpu()/unregister_cpu, whose args are changed
by register-cpu-remove-node-struct patch.

[Brice.Goglin@ens-lyon.org: fix it]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:37 -07:00
Yasunori Goto 0fc44159bf [PATCH] Register sysfs file for hotplugged new node
When new node becomes enable by hot-add, new sysfs file must be created for
new node.  So, if new node is enabled by add_memory(), register_one_node() is
called to create it.  In addition, I386's arch_register_node() and a part of
register_nodes() of powerpc are consolidated to register_one_node() as a
generic_code().

This is tested by Tiger4(IPF) with node hot-plug emulation.

Signed-off-by: Keiichiro Tokunaga <tokuanga.keiich@jp.fujitsu.com>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:36 -07:00
Christoph Lameter 54404e72cd [PATCH] Fix NULL pointer dereference in node_read_numastat()
zone_pcp() only returns valid values if the processor is online.

Change node_read_numastat() to only scan online processors.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:30 -07:00
Martin Hicks c07e02db76 [PATCH] VM: add page_state info to per-node meminfo
Add page_state info to the per-node meminfo file in sysfs.  This is mostly
just for informational purposes.

The lack of this information was brought up recently during a discussion
regarding pagecache clearing, and I put this patch together to test out one
of the suggestions.

It seems like interesting info to have, so I'm submitting the patch.

Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:49 -07:00
Christoph Lameter e7c8d5c995 [PATCH] node local per-cpu-pages
This patch modifies the way pagesets in struct zone are managed.

Each zone has a per-cpu array of pagesets.  So any particular CPU has some
memory in each zone structure which belongs to itself.  Even if that CPU is
not local to that zone.

So the patch relocates the pagesets for each cpu to the node that is nearest
to the cpu instead of allocating the pagesets in the (possibly remote) target
zone.  This means that the operations to manage pages on remote zone can be
done with information available locally.

We play a macro trick so that non-NUMA pmachines avoid the additional
pointer chase on the page allocator fastpath.

AIM7 benchmark on a 32 CPU SGI Altix

w/o patches:
Tasks    jobs/min  jti  jobs/min/task      real       cpu
    1      484.68  100       484.6769     12.01      1.97   Fri Mar 25 11:01:42 2005
  100    27140.46   89       271.4046     21.44    148.71   Fri Mar 25 11:02:04 2005
  200    30792.02   82       153.9601     37.80    296.72   Fri Mar 25 11:02:42 2005
  300    32209.27   81       107.3642     54.21    451.34   Fri Mar 25 11:03:37 2005
  400    34962.83   78        87.4071     66.59    588.97   Fri Mar 25 11:04:44 2005
  500    31676.92   75        63.3538     91.87    742.71   Fri Mar 25 11:06:16 2005
  600    36032.69   73        60.0545     96.91    885.44   Fri Mar 25 11:07:54 2005
  700    35540.43   77        50.7720    114.63   1024.28   Fri Mar 25 11:09:49 2005
  800    33906.70   74        42.3834    137.32   1181.65   Fri Mar 25 11:12:06 2005
  900    34120.67   73        37.9119    153.51   1325.26   Fri Mar 25 11:14:41 2005
 1000    34802.37   74        34.8024    167.23   1465.26   Fri Mar 25 11:17:28 2005

with slab API changes and pageset patch:

Tasks    jobs/min  jti  jobs/min/task      real       cpu
    1      485.00  100       485.0000     12.00      1.96   Fri Mar 25 11:46:18 2005
  100    28000.96   89       280.0096     20.79    150.45   Fri Mar 25 11:46:39 2005
  200    32285.80   79       161.4290     36.05    293.37   Fri Mar 25 11:47:16 2005
  300    40424.15   84       134.7472     43.19    438.42   Fri Mar 25 11:47:59 2005
  400    39155.01   79        97.8875     59.46    590.05   Fri Mar 25 11:48:59 2005
  500    37881.25   82        75.7625     76.82    730.19   Fri Mar 25 11:50:16 2005
  600    39083.14   78        65.1386     89.35    872.79   Fri Mar 25 11:51:46 2005
  700    38627.83   77        55.1826    105.47   1022.46   Fri Mar 25 11:53:32 2005
  800    39631.94   78        49.5399    117.48   1169.94   Fri Mar 25 11:55:30 2005
  900    36903.70   79        41.0041    141.94   1310.78   Fri Mar 25 11:57:53 2005
 1000    36201.23   77        36.2012    160.77   1458.31   Fri Mar 25 12:00:34 2005

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Shobhit Dayal <shobhit@calsoftinc.com>
Signed-off-by: Shai Fultheim <Shai@Scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:16 -07:00
Keiichiro Tokunaga 4b45099b75 [PATCH] Driver core: unregister_node() for hotplug use
This adds a generic function 'unregister_node()'.
It is used to remove objects of a node going away
for hotplug.  All the devices on the node must be
unregistered before calling this function.

Signed-off-by: Keiichiro Tokunaga <tokunaga.keiich@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff -puN drivers/base/node.c~numa_hp_base drivers/base/node.c
2005-06-20 15:15:29 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00