The module parameter for KDETH qpns is being removed in favor
of always using the default value of 0x80 as the qpn prefix.
Defines have been added for various KDETH values including
the prefix of 0x80.
The reserved range now starts at the base value for KDETH
qpns (0x80) and extends up to and including the last qpn for
other reserved QP prefixed types.
Adjust other QP prefixed define names to match KDETH defined
names.
Link: https://lore.kernel.org/r/20200511160600.173205.27508.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This implements the transmit side of the multiple transmit queue RDMA
netdev used to accelerate ipoib. The receive side remains the ipoib
internal implementation.
The init/unint/open/stop netdev operations are saved off and called by the
versions within the hfi1 netdev in order to initialize the connected mode
resources present in ipoib thus allowing us to switch modes between
datagram and connected.
The datagram queue pair instantiated by the ipoib ulp is used by this
implementation for its queue pair number and to register with multicast.
The above queue pair is not used on transmit other than its qpn as the
verbs layer is skipped and packets are directly submitted to the sdma
engines.
Link: https://lore.kernel.org/r/20200511160554.173205.1369.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch implements the mechanism to accelerate the transmit side of
a multiple transmit queue RDMA netdev by submitting the packets to
the SDMA engine directly instead of sending through the verbs layer.
This patch also changes the UD/SEND_ONLY op to output the entropy value
in byte 0 of deth[1]. UD/SEND_ONLY_WITH_IMMEDIATE uses the previous
behavior with no entropy value being output.
The code in the ipoib rdma netdev which submits tx requests upon
successful submission will call trace_sdma_output_ibhdr to output
the ibhdr to the trace buffer.
Link: https://lore.kernel.org/r/20200511160548.173205.45616.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The accelerated IP capability bit is added to allow users to control
which feature is enabled and disabled.
Link: https://lore.kernel.org/r/20200511160541.173205.96870.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The host info feature allows the driver to infrom the EFA device
firmware with system configuration for debugging and troubleshooting
purposes.
The host info buffer is passed as an admin command DMA mapped control
buffer, and is unmapped and freed once the command CQE is consumed.
Currently, the setting of host info is done for each device on its
probe. Failing to set the host info for the device shall not disturb the
probe flow, any errors will be discarded.
Link: https://lore.kernel.org/r/20200512152204.93091-3-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When using a control buffer the ctrl_data bit should be set in order to
indicate the control buffer address is valid, not ctrl_data_indirect
which is used when the control buffer itself is indirect.
Fixes: e9c6c53730 ("RDMA/efa: Add common command handlers")
Link: https://lore.kernel.org/r/20200512152204.93091-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Missing INIT2INIT entry in the list of modify commands caused DEVX
applications to be unable to modify_qp for this transition state. Add the
MLX5_CMD_OP_INIT2INIT_QP opcode to the list of allowed DEVX opcodes.
Fixes: e662e14d80 ("IB/mlx5: Add DEVX support for modify and query commands")
Link: https://lore.kernel.org/r/20200513095550.211345-1-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When kobject_init_and_add() returns an error in the function
qib_create_port_files(), the function kobject_put() is not called for the
corresponding kobject, which potentially leads to memory leak.
This patch fixes the issue by calling kobject_put() even if
kobject_init_and_add() fails. In addition, the ppd->diagc_kobj is released
along with other kobjects when the sysfs is unregistered.
Fixes: f931551baf ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Link: https://lore.kernel.org/r/20200512031328.189865.48627.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Suggested-by: Lin Yi <teroincn@gmail.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When rq/srq sge length is smaller than sq sge length, it will produce a
local length error and may cause the bus to hang. Therefore, for rq wqe
and srq wqe, one reserved sge pointing to a reserved mr is used to avoid
this error.
Link: https://lore.kernel.org/r/1588931159-56875-10-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
srq_context is a local variables and is only used to get some fields from
buffer of mailbox. It's meaningless to copy mailbox's buffer's contents
back to it.
Link: https://lore.kernel.org/r/1588931159-56875-8-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The length information should be stored in the struct ib_mr object,
otherwise the length value of a valid mr object would always be 0.
Link: https://lore.kernel.org/r/1588931159-56875-7-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For ilog2(x), if x is 0 and not a constant variable, it will return
-1. And there will be an error as below:
hns3 0000:7d:00.0 hns_0: Local work queue 0x8 catast error, sub_event type is: 2
So modify to_hr_hem_entries_shift() to return 0 if conut is 0.
Fixes: 54d6638765 ("RDMA/hns: Optimize WQE buffer size calculating process")
Link: https://lore.kernel.org/r/1588931159-56875-6-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When allocating eq buffer, the size of base address page should be defined
by eqe_ba_pg_sz instead of srqwqe_ba_pg_sz.
Fixes: 477a0a3870 ("RDMA/hns: Optimize 0 hop addressing for EQE buffer")
Link: https://lore.kernel.org/r/1588931159-56875-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The firmware has reduced the number of descriptions of command
HNS_ROCE_OPC_QUERY_PF_TIMER_RES to 1. The driver needs to adapt, otherwise
the hardware will report error 4(CMD_NEXT_ERR).
Fixes: 0e40dc2f70 ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/1588931159-56875-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The qkey queried through the query ud qp verb is a fixed value and it
should be read from qp context.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1588931159-56875-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current codebase makes use of one-element arrays in the following
form:
struct something {
int length;
u8 data[1];
};
struct something *instance;
instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);
but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on. So, replace
the one-element array with a flexible-array member.
Also, make use of the new struct_size() helper to properly calculate the
size of struct siw_pbl.
This issue was found with the help of Coccinelle and, audited and fixed
_manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Link: https://lore.kernel.org/r/20200519233018.GA6105@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When Block Device Layer is disabled, BLK_MAX_SEGMENT_SIZE is undefined.
The rtrs is a transport library and should compile independently of the
block layer. The desired max segment size should be passed down by the
user.
Introduce max_segment_size parameter for the rtrs_clt_open() call.
Fixes: f7a7a5c228 ("block/rnbd: client: main functionality")
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Fixes: cb80329c94 ("RDMA/rtrs: client: private header with client structs and functions")
Fixes: b5c27cdb09 ("RDMA/rtrs: public interface header to establish RDMA connections")
Link: https://lore.kernel.org/r/20200519111419.924170-1-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix to return negative error code -ENOMEM from the some error handling
cases instead of 0, as done elsewhere in this function.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Fixes: 91b11610af ("RDMA/rtrs: server: sysfs interface functions")
Link: https://lore.kernel.org/r/20200519091912.134358-1-weiyongjun1@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the if-statement and return the value contained in _err_,
unconditionally.
Link: https://lore.kernel.org/r/20200519163612.GA6043@embeddedor
Addresses-Coverity-ID: 1493753 ("Identical code for different branches")
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These > comparisons should be >= to prevent accessing one element beyond
the end of the buffer.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20200519154525.GA66801@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The problem is that "req->sg_cnt" is an unsigned int so if "nr" is
negative, it gets type promoted to a high positive value and the condition
is false. This patch fixes it by handling negatives separately.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20200519133223.GN2078@kadam
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Support adding header modifying actions to the RDMA TX flow table.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Avoid disabling device management for devices that don't support
Management datagrams (MADs) by checking if the "mad_agent" pointer is
initialized before calling ib_modify_port, also fix the error flow in
srpt_refresh_port() to disable device management if
ib_register_mad_agent() fail.
Fixes: 09f8a1486d ("RDMA/srpt: Fix handling of SR-IOV and iWARP ports")
Link: https://lore.kernel.org/r/20200514114720.141139-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current description doesn't include new devices, change it by updating to
have more generic description and remove DRIVER_NAME and DRIVER_VERSION
defines.
Link: https://lore.kernel.org/r/20200513095304.210240-1-leon@kernel.org
Signed-off-by: Shay Drory <shayd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When I cat module parameter 'srpt_service_guid', it displays as follows.
It is better to add a newline for easy reading.
[root@hulk-202 ~]# cat /sys/module/ib_srpt/parameters/srpt_service_guid
0x0205cdfffe8346b9[root@hulk-202 ~]#
Link: https://lore.kernel.org/r/1589182629-27743-1-git-send-email-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The uverbs layer largely duplicate the code in ib_create_srq(), with the
slight difference that it passes in a udata. Move all the code together
into ib_create_srq_user() and provide an inline for kernel users, similar
to other create calls.
Link: https://lore.kernel.org/r/20200506082444.14502-6-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix create WQ to use the given user handle, in addition dropped some
duplicated code from this flow.
Fixes: fd3c7904db ("IB/core: Change idr objects to use the new schema")
Fixes: f213c05272 ("IB/uverbs: Add WQ support")
Link: https://lore.kernel.org/r/20200506082444.14502-9-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Both wq_context and srq_context are some leftover from the past in uverbs
layer, they are not really in use, drop them.
Link: https://lore.kernel.org/r/20200506082444.14502-5-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add rtrs Makefile, Kconfig and also corresponding lines into upper layer
infiniband/ulp files.
Link: https://lore.kernel.org/r/20200511135131.27580-14-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is the sysfs interface to rtrs sessions on server side:
/sys/class/rtrs-server/<SESS-NAME>/
*** rtrs session accepted from a client peer
|
|- paths/<SRC@DST>/
*** established paths from a client in a session
|
|- disconnect
| *** disconnect path
|
|- hca_name
| *** HCA name
|
|- hca_port
| *** HCA port
|
|- stats/
*** current path statistics
|
|- rdma
Link: https://lore.kernel.org/r/20200511135131.27580-13-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This introduces set of functions used on server side to account statistics
of RDMA data sent/received.
Link: https://lore.kernel.org/r/20200511135131.27580-12-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is main functionality of rtrs-server module, which accepts set of
RDMA connections (so called rtrs session), creates/destroys sysfs entries
associated with rtrs session and notifies upper layer
(user of RTRS API) about RDMA requests or link events.
Link: https://lore.kernel.org/r/20200511135131.27580-11-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This header describes main structs and functions used by rtrs-server
module, mainly for accepting rtrs sessions, creating/destroying sysfs
entries, accounting statistics on server side.
Link: https://lore.kernel.org/r/20200511135131.27580-10-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is the sysfs interface to rtrs sessions on client side:
/sys/class/rtrs-client/<SESS-NAME>/
*** rtrs session created by rtrs_clt_open() API call
|
|- max_reconnect_attempts
| *** number of reconnect attempts for session
|
|- add_path
| *** adds another connection path into rtrs session
|
|- paths/<SRC@DST>/
*** established paths to server in a session
|
|- disconnect
| *** disconnect path
|
|- reconnect
| *** reconnect path
|
|- remove_path
| *** remove current path
|
|- state
| *** retrieve current path state
|
|- hca_port
| *** HCA port number
|
|- hca_name
| *** HCA name
|
|- stats/
*** current path statistics
|
|- cpu_migration
|- rdma
|- reconnects
|- reset_all
Link: https://lore.kernel.org/r/20200511135131.27580-9-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This introduces set of functions used on client side to account statistics
of RDMA data sent/received, amount of IOs inflight, latency, cpu
migrations, etc. Almost all statistics are collected using percpu
variables.
Link: https://lore.kernel.org/r/20200511135131.27580-8-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is main functionality of rtrs-client module, which manages set of
RDMA connections for each rtrs session, does multipathing, load balancing
and failover of RDMA requests.
Link: https://lore.kernel.org/r/20200511135131.27580-7-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This header describes main structs and functions used by rtrs-client
module, mainly for managing rtrs sessions, creating/destroying sysfs
entries, accounting statistics on client side.
Link: https://lore.kernel.org/r/20200511135131.27580-6-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is a set of library functions existing as a rtrs-core module, used by
client and server modules.
Mainly these functions wrap IB and RDMA calls and provide a bit higher
abstraction for implementing of RTRS protocol on client or server sides.
Link: https://lore.kernel.org/r/20200511135131.27580-5-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These are common private headers with rtrs protocol structures, logging,
sysfs and other helper functions, which are used on both client and server
sides.
Link: https://lore.kernel.org/r/20200511135131.27580-4-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce public header which provides set of API functions to establish
RDMA connections from client to server machine using RTRS protocol, which
manages RDMA connections for each session, does multipathing and load
balancing.
Main functions for client (active) side:
rtrs_clt_open() - Creates set of RDMA connections incapsulated
in IBTRS session and returns pointer on RTRS
session object.
rtrs_clt_close() - Closes RDMA connections associated with RTRS
session.
rtrs_clt_request() - Requests zero-copy RDMA transfer to/from
server.
Main functions for server (passive) side:
rtrs_srv_open() - Starts listening for RTRS clients on specified
port and invokes RTRS callbacks for incoming
RDMA requests or link events.
rtrs_srv_close() - Closes RTRS server context.
Link: https://lore.kernel.org/r/20200511135131.27580-3-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
The output buffer used in mlx5_cmd_exec_inout() was wrongly changed from
pre-allocated srq_out pointer to an input "out" point. That leads to
unpredictable results in the get_srqc() call later.
Fixes: 31578defe4 ("RDMA/mlx5: Update mlx5_ib to use new cmd interface")
Link: https://lore.kernel.org/r/20200513100809.246315-1-leon@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When drop action is used the matching packet will stop processing in
steering and will be dropped. This functionality will allow users to drop
matching packets.
Link: https://lore.kernel.org/r/20200504054227.271486-1-leon@kernel.org
Signed-off-by: Daria Velikovsky <daria@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
User can configure default miss rule in order to skip matching in the user
domain and forward the packet to the kernel steering domain. When user
requests a default miss rule, we add steering rule to forward the traffic
to the next namespace.
Link: https://lore.kernel.org/r/20200504053012.270689-5-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move part of the code that get the destinations into function so the code
will be more readable. In addition change the variables definition to be
in reversed christmas tree.
Link: https://lore.kernel.org/r/20200504053012.270689-4-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Required for dependencies in following patches
* branch 'mellanox/mlx5-next':
net/mlx5: Add support in forward to namespace
{IB/net}/mlx5: Simplify don't trap code
net/mlx5: Replace zero-length array with flexible-array
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The fs_core already supports creation of rules with multiple
actions/destinations. Refactor fs_core to handle the case
when don't trap rule is created with destination. Adapt the
calling code in the driver.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
All callers need the 'get', so do it in a central place before returning
the pointer.
Link: https://lore.kernel.org/r/20200506074701.9775-11-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The only caller doesn't care about the timewait, so acquire and return the
cm_id_private from the function.
Link: https://lore.kernel.org/r/20200506074701.9775-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The way the cm_timewait_info is converted into a work and then freed
is very subtle and surprising, add a note clarifying the lifetime
here.
Link: https://lore.kernel.org/r/20200506074701.9775-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Also rename it to cm_remove_remote(). This function now removes the
tracking of the remote ID/QPN in the redblack trees from a cm_id_private.
Replace a open-coded version with a call. The open coded version was
deleting only the remote_id, however at this call site the qpn can not
have been in the RB tree either, so the cm_remove_remote() will do the
same.
Link: https://lore.kernel.org/r/20200506074701.9775-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
While unlocking a spinlock held by the caller is a disturbing pattern,
this extensively duplicated code is even worse. Pull all the duplicates
into a function and explain the purpose of the algorithm.
The on creation side call in cm_req_handler() which is different has been
micro-optimized on the basis that the work_count == -1 during creation,
remove that and just use the normal function.
Link: https://lore.kernel.org/r/20200506074701.9775-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The 'goto out' label doesn't read ret, so don't set it.
Link: https://lore.kernel.org/r/20200506074701.9775-4-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This cannot happen, all callers pass in one of the two pointers. Use
a WARN_ON guard instead.
Link: https://lore.kernel.org/r/20200506074701.9775-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Under one path through ib_nl_fetch_ha() this calls nlmsg_new(GFP_KERNEL)
which is a sleeping call. This is a very rare path, so mark fetch_ha() and
the module external entry point that conditionally calls through to
fetch_ha() as might_sleep().
Link: https://lore.kernel.org/r/20200506074701.9775-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It's easier to understand and maintain enable flags of qp using a single
field in type of unsigned long than defining a field for every flags in
the structure hns_roce_qp, and we can add new flags for features more
conveniently in the future.
Link: https://lore.kernel.org/r/1588674607-25337-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The librdmacm uses node_guid as identifier to correlate between IB devices
and CMA devices. However FW resets cause to such "connection" to be lost
and require from the user to restart its application.
Extend UCMA to return IB device index, which is stable identifier.
Link: https://lore.kernel.org/r/20200504132541.355710-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When multiple async FDs were allowed to exist the idea was for all
broadcast events to be delivered to all async FDs, however
IB_EVENT_DEVICE_FATAL was missed.
Instead of having ib_uverbs_free_hw_resources() special case the global
async_fd, have it cause the event during the uobject destruction. Every
async fd is now a uobject so simply generate the IB_EVENT_DEVICE_FATAL
while destroying the async fd uobject. This ensures every async FD gets a
copy of the event.
Fixes: d680e88e20 ("RDMA/core: Add UVERBS_METHOD_ASYNC_EVENT_ALLOC")
Link: https://lore.kernel.org/r/20200507063348.98713-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The commit below moved all of the destruction to the disassociate step and
cleaned up the event channel during destroy_uobj.
However, when ib_uverbs_free_hw_resources() pushes IB_EVENT_DEVICE_FATAL
and then immediately goes to destroy all uobjects this causes
ib_uverbs_free_event_queue() to discard the queued event if userspace
hasn't already read() it.
Unlike all other event queues async FD needs to defer the
ib_uverbs_free_event_queue() until FD release. This still unregisters the
handler from the IB device during disassociation.
Fixes: 3e032c0e92 ("RDMA/core: Make ib_uverbs_async_event_file into a uobject")
Link: https://lore.kernel.org/r/20200507063348.98713-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
While reading the TCB field in t4_tcb_get_field32() the wrong mask is
passed as a parameter which leads the driver eventually to a kernel
panic/app segfault from access to an illegal SRQ index while flushing the
SRQ completions during connection teardown.
Fixes: 11a27e2121 ("iw_cxgb4: complete the cached SRQ buffers")
Link: https://lore.kernel.org/r/20200511185608.5202-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Do not decrease the reference count of resource tracker object twice in
the error flow of res_get_common_doit.
Fixes: c5dfe0ea6f ("RDMA/nldev: Add resource tracker doit callback")
Link: https://lore.kernel.org/r/20200507062942.98305-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The IB core pkey cache is populated by procedure ib_cache_update().
Initially, the pkey cache pointer is NULL. ib_cache_update allocates a
buffer and populates it with the device's pkeys, via repeated calls to
procedure ib_query_pkey().
If there is a failure in populating the pkey buffer via ib_query_pkey(),
ib_cache_update does not replace the old pkey buffer cache with the
updated one -- it leaves the old cache as is.
Since initially the pkey buffer cache is NULL, when calling
ib_cache_update the first time, a failure in ib_query_pkey() will cause
the pkey buffer cache pointer to remain NULL.
In this situation, any calls subsequent to ib_get_cached_pkey(),
ib_find_cached_pkey(), or ib_find_cached_pkey_exact() will try to
dereference the NULL pkey cache pointer, causing a kernel panic.
Fix this by checking the ib_cache_update() return value.
Fixes: 8faea9fd4a ("RDMA/cache: Move the cache per-port data into the main ib_port_data")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20200507071012.100594-1-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The commit noted below fixed a case where a pq is left on the sdma wait
list.
It however missed another case.
user_sdma_send_pkts() has two calls from hfi1_user_sdma_process_request().
If the first one fails as indicated by -EBUSY, the pq will be placed on
the waitlist as by design.
If the second call then succeeds, the pq is still on the waitlist setting
up a race with the interrupt handler if a subsequent request uses a
different SDMA engine
Fix by deleting the first call.
The use of pcount and the intent to send a short burst of packets followed
by the larger balance of packets was never correctly implemented, because
the two calls always send pcount packets no matter what. A subsequent
patch will correct that issue.
Fixes: 9a293d1e21 ("IB/hfi1: Ensure pq is not left on waitlist")
Link: https://lore.kernel.org/r/20200504130917.175613.43231.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Local variable netdev is not used in these calls.
It should be noted, that this change is required to work in bonded mode.
Otherwise we would get the following assert:
"RTNL: assertion failed at net/core/dev.c (5665)"
With the calltrace as follows:
dump_stack+0x19/0x1b
netdev_master_upper_dev_get+0x61/0x70
i40iw_addr_resolve_neigh+0x1e8/0x220
i40iw_make_cm_node+0x296/0x700
? i40iw_find_listener.isra.10+0xcc/0x110
i40iw_receive_ilq+0x3d4/0x810
i40iw_puda_poll_completion+0x341/0x420
i40iw_process_ceq+0xa5/0x280
i40iw_ceq_dpc+0x1e/0x40
tasklet_action+0x83/0x140
__do_softirq+0x125/0x2bb
call_softirq+0x1c/0x30
do_softirq+0x65/0xa0
irq_exit+0x105/0x110
do_IRQ+0x56/0xf0
common_interrupt+0x16a/0x16a
? cpuidle_enter_state+0x57/0xd0
cpuidle_idle_call+0xde/0x230
arch_cpu_idle+0xe/0xc0
cpu_startup_entry+0x14a/0x1e0
start_secondary+0x1f7/0x270
start_cpu+0x5/0x14
Link: https://lore.kernel.org/r/20200428131511.11049-1-den@openvz.org
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the mlx4_ib_post_send() flow, some functions call ib_get_cached_pkey()
without checking its return value. If ib_get_cached_pkey() returns an
error code, these functions should return failure.
Fixes: 1ffeb2eb8b ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Fixes: 225c7b1fee ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Fixes: e622f2f4ad ("IB: split struct ib_send_wr")
Link: https://lore.kernel.org/r/20200426075921.130074-1-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The commit below modified rxe_create_mmap_info() to return ERR_PTR's but
didn't update the callers to handle them. Modify rxe_create_mmap_info() to
only return ERR_PTR and fix all error checking after
rxe_create_mmap_info() is called.
Ensure that all other exit paths properly set the error return.
Fixes: ff23dfa134 ("IB: Pass only ib_udata in function prototypes")
Link: https://lore.kernel.org/r/20200425233545.17210-1-sudipm.mukherjee@gmail.com
Link: https://lore.kernel.org/r/20200511183742.GB225608@mwanda
Cc: stable@vger.kernel.org [5.4+]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The variable rcqe_sz is being unnecessarily assigned twice, fix this by
removing one of the duplicates.
Fixes: 8bde2c509e ("RDMA/mlx5: Update all DRIVER QP places to use QP subtype")
Link: https://lore.kernel.org/r/20200507151610.52636-1-colin.king@canonical.com
Addresses-Coverity: ("Evaluation order violation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When operating in switchdev mode or using devlink to disable RoCE
only raw Ethernet QPs are allowed to be created.
When in switchdev mode this can lead to passing an invalid port number
as part of the modify qp firmware cmd and will lead to a syndrome
reported back to the user, such as:
* mlx5_cmd_check:803:(pid 50148): RST2INIT_QP(0x502) op_mod(0x0) failed,
status bad parameter(0x3), syndrome (0x177405).
Internal UD QP might be used to test for write combining support (even if
externally we report RoCE as disabled) check for that specific flag and
allow is specifically.
Fixes: b5ca15ad7e ("IB/mlx5: Add proper representors support")
Link: https://lore.kernel.org/r/20200506071602.7177-3-leon@kernel.org
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Assign the profile to the IB device before executing stages. This will
allow to check which profile is being used from within a stage.
Link: https://lore.kernel.org/r/20200506071602.7177-2-leon@kernel.org
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add small helpers in order to avoid code duplication and improve code
readability. Decrease the amount of code in the gigantic post_send
function and divide it to readable methods that will help in code
maintenance in the future.
Link: https://lore.kernel.org/r/20200506065513.4668-3-leon@kernel.org
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reuse newly introduced mlx5_cmd_exec_in() and mlx5_cmd_exec_inout() to
reduce code duplication in mlx5_ib module.
Link: https://lore.kernel.org/r/20200506065513.4668-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These caps are assigned in query_pf_caps() or set_default_caps(), and
should not be assigned out of these two functions.
Link: https://lore.kernel.org/r/1588242691-12913-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
lp_pktn_ini means the number of loopback slice packets for long messages,
it should depend on MTU(fixed to 4096B currently) and max size of SQ
inline.
Link: https://lore.kernel.org/r/1588242691-12913-3-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a comments with some chinese semicolons that cause encoding
issues each time hns_roc_hw_v2.h was modified from a IDE. So fix this by
using correct symbols.
Link: https://lore.kernel.org/r/1588242691-12913-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Optimize the SRQ's WQE buffer parameters calculating process to make the
codes more readable by using new functions about multi-hop addressing to
calculating capabilities of SRQ.
Link: https://lore.kernel.org/r/1588071823-40200-6-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Just move the SRQ related code to more reasonable place, and unify format
of some prints.
Link: https://lore.kernel.org/r/1588071823-40200-5-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Optimize the QP's WQE buffer parameters calculating process to make the
codes more readable mainly by merging calculation of extended sge space of
kernel and userspace. In addition, add some inline functions to simply
codes about multi-hop addressing.
Link: https://lore.kernel.org/r/1588071823-40200-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The MTT (Memory Translate Table) interface is no longer used to configure
the buffer address to BT (Base Address Table) that requires driver
mapping. Because the MTT is not compatible with multi-hop addressing of
the hip08, it is replaced by MTR (Memory Translate Region) interface, and
all the MTT functions should be removed.
Link: https://lore.kernel.org/r/1588071823-40200-3-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
PBL table has its own implementation for multi-hop addressing currently,
but for the hardware, all table's addressing use the same logic, there is
no need to implement repeatedly. So optimize the PBL buffer allocation
process by using the mtr's interfaces.
Link: https://lore.kernel.org/r/1588071823-40200-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Calculate UDP source port based on the grh.flow_label. If grh.flow_label
is not valid, we will use minimal supported UDP source port.
Link: https://lore.kernel.org/r/20200504051935.269708-6-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If flow label is not set by the user or it's not IPv4, initialize it with
the cma src/dst based on the "Kernighan and Ritchie's hash function".
Link: https://lore.kernel.org/r/20200504051935.269708-5-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Calculate and set UDP source port based on the flow label. If flow label
is not defined in GRH then calculate it based on lqpn/rqpn.
Link: https://lore.kernel.org/r/20200504051935.269708-4-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use rdma_flow_label_to_udp_sport to calculate the UDP source port of the
RoCEV2 packet.
Link: https://lore.kernel.org/r/20200504051935.269708-3-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a client is added it isn't allowed to fail, but all the client's have
various failure paths within their add routines.
This creates the very fringe condition where the client was added, failed
during add and didn't set the client_data. The core code will then still
call other client_data centric ops like remove(), rename(), get_nl_info(),
and get_net_dev_by_params() with NULL client_data - which is confusing and
unexpected.
If the add() callback fails, then do not call any more client ops for the
device, even remove.
Remove all the now redundant checks for NULL client_data in ops callbacks.
Update all the add() callbacks to return error codes
appropriately. EOPNOTSUPP is used for cases where the ULP does not support
the ib_device - eg because it only works with IB.
Link: https://lore.kernel.org/r/20200421172440.387069-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Snoop interface is not used. Remove it.
Link: https://lore.kernel.org/r/20200413132408.931084-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The i40iw_arp_table() function can return -EOVERFLOW if
i40iw_alloc_resource() fails so we can't just test for "== -1".
Fixes: 4e9042e647 ("i40iw: add hw and utils files")
Link: https://lore.kernel.org/r/20200422092211.GA195357@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a new stat that counts admin commands failures, which might help when
debugging different issues.
Link: https://lore.kernel.org/r/20200420062213.44577-4-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a new stat that counts mmap failures, which might help when debugging
different issues.
Link: https://lore.kernel.org/r/20200420062213.44577-3-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Create CQ errors are already being counted, report them along all other
counters.
Link: https://lore.kernel.org/r/20200420062213.44577-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The patch sets the lag tx affinity of the data QPs and the GSI QPs
according to the LAG xmit slave.
For GSI QPs, in case the link layer is Ethenet (RoCE) we create two GSI
QPs, one for each physical port. When the driver selects the GSI QP, it
will consider the port affinity result. For connected QPs, the driver
sets the affinity of the xmit slave.
The above, ensures that RC QP and it's corresponding GSI QP will transmit
from the same physical port.
Link: https://lore.kernel.org/r/20200430192146.12863-17-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move affinity related code in modify qp to function. It's a preparation
for next patch the extend the affinity calculation to consider the xmit
slave.
Link: https://lore.kernel.org/r/20200430192146.12863-16-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a call to rdma_lag_get_ah_roce_slave() when the address handle is
created. Lower driver can use it to select the QP's affinity port.
Link: https://lore.kernel.org/r/20200430192146.12863-15-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support to get the RoCE LAG xmit slave by building skb of the RoCE
packet and call to master_get_xmit_slave. If driver wants to get the
slave assume all slaves are available, then need to set
RDMA_LAG_FLAGS_HASH_ALL_SLAVES in flags.
Link: https://lore.kernel.org/r/20200430192146.12863-14-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Following patch adds additional argument to the create AH function, so it
make sense to group ah_attr and flags arguments in struct.
Link: https://lore.kernel.org/r/20200430192146.12863-13-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Acked-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
RAW packet QP and underlay QP must be created with either
RQ or SQ, check that.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20200427154636.381474-37-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Finish separation to blocks of mlx5_ib_create_qp() functions,
so all internal create QP implementation are located in one place.
Link: https://lore.kernel.org/r/20200427154636.381474-36-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
After major refactoring in create QP flow, it is no needed to call
to destroy QP in XRC_TGT flow.
Link: https://lore.kernel.org/r/20200427154636.381474-35-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Update all the places in create QP flows to copy response
to the user in one place.
Link: https://lore.kernel.org/r/20200427154636.381474-34-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Place in one function all udata size checks. This will allow
us move ib_copy_to_udata() in general place and ensure that
it will be performed after call to the FW.
Link: https://lore.kernel.org/r/20200427154636.381474-33-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move check that user didn't supplied RSS RAW QP unsupported
command flags to the function that checks all such flags.
Link: https://lore.kernel.org/r/20200427154636.381474-32-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The amount of parameters passed in and out between internal mlx5
create QP functions is too large to easily follow the flow. Change
it by grouping all create QP parameter into one structure.
Link: https://lore.kernel.org/r/20200427154636.381474-31-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Delete both PD argument and checks if udata was provided, in favour
of unified destroy QP functions.
Link: https://lore.kernel.org/r/20200427154636.381474-30-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The kernel and user create QP flows have very little common code,
separate them to simplify the future work of creating per-type
create_*_qp() functions.
Link: https://lore.kernel.org/r/20200427154636.381474-29-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
XRC_TGT QP doesn't fail into kernel or user flow separation. It is
initiated by the user, but is created through in-kernel verbs flow
and doesn't have PD and udata in similar way to kernel QPs.
So let's separate creation of that QP type from the common flow.
Link: https://lore.kernel.org/r/20200427154636.381474-28-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove duplication in parsing of DEVX UID.
Link: https://lore.kernel.org/r/20200427154636.381474-27-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The inlen is set to be above zero in all flows before
and can't be negative at this stage.
Link: https://lore.kernel.org/r/20200427154636.381474-26-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of keeping special field to separate kernel/user create/destroy
flows, rely on existence of udata pointer. All allocation flows are
using kzalloc() and leave uninitialized pointers as NULL which makes
MLX5_QP_EMPTY and MLX5_QP_KERNEL flows to be the same.
Link: https://lore.kernel.org/r/20200427154636.381474-25-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Combine copy_from_user() from create_user_qp() and general code.
Link: https://lore.kernel.org/r/20200427154636.381474-24-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Change the create QP flow to handle all copy_from_user() operations in
one place.
Link: https://lore.kernel.org/r/20200427154636.381474-23-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Perform check of attributes of RAW PACKET QP in separate function.
Link: https://lore.kernel.org/r/20200427154636.381474-22-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
QP type is stored in the IB/core QP struct, but it doesn't have all the
needed information, like internal QP type used in the driver itself.
Update mlx5_ib to have cached QP type which includes both IBTA and
Mellanox specific one.
Such change allows us to make even further cleanup of QP creation flow.
Link: https://lore.kernel.org/r/20200427154636.381474-21-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to explicitly check unsupported QP types,
rely on "default" keyword in switch-case to catch them.
Link: https://lore.kernel.org/r/20200427154636.381474-20-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky says:
====================
This is first part of series which tries to return some sanity to
mlx5_ib_create_qp() function. Such refactoring is required to make
extension of that function with less worries of breaking driver.
Extra goal of such refactoring is to ensure that QP is allocated at the
beginning of function and released at the end. It will allow us to move QP
allocation to be under IB/core responsibility.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Due to dependencies
* branch 'mlx5_ib_qp_refactor_1': (66 commits)
RDMA/mlx5: Process all vendor flags in one place
RDMA/mlx5: Return all configured create flags through query QP
RDMA/mlx5: Change scatter CQE flag to be set like other vendor flags
RDMA/mlx5: Use flags_en mechanism to mark QP created with WQE signature
RDMA/mlx5: Process create QP flags in one place
RDMA/mlx5: Delete create QP flags obfuscation
RDMA/mlx5: Initial separation of RAW_PACKET QP from common flow
RDMA/mlx5: Remove second copy from user for non RSS RAW QPs
RDMA/mlx5: Move DRIVER QP flags check into separate function
RDMA/mlx5: Update all DRIVER QP places to use QP subtype
RDMA/mlx5: Split scatter CQE configuration for DCT QP
RDMA/mlx5: Separate create QP flows to be based on type
RDMA/mlx5: Set QP subtype immediately when it is known
RDMA/mlx5: Avoid setting redundant NULL for XRC QPs
RDMA/mlx5: Prepare QP allocation for future removal
RDMA/mlx5: Perform check if QP creation flow is valid
RDMA/mlx5: Delete impossible GSI port check
RDMA/mlx5: Organize QP types checks in one place
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Check that vendor flags provided through ucmd are valid.
Link: https://lore.kernel.org/r/20200427154636.381474-19-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The "flags" field in struct mlx5_ib_qp contains all UAPI flags
configured at the create QP stage. Return all the data as is
without masking.
Link: https://lore.kernel.org/r/20200427154636.381474-18-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In similar way to wqe_sig, the scat_cqe was treated differently from
other create QP vendor flags. Change it to be similar to other flags
and use flags_en mechanism.
Link: https://lore.kernel.org/r/20200427154636.381474-17-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
MLX5_QP_FLAG_SIGNATURE is exposed to the users but in the kernel
the create_qp flow treated it differently from other MLX5_QP_FLAG_*s.
Fix it by ditching wq_sig boolean variable and use general flag_en
mechanism.
Link: https://lore.kernel.org/r/20200427154636.381474-16-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
create_flags is checked in too many places and scattered across all
the code, consolidate all the checks inside one function, so we will
be easily see the flow. As part of such change, delete unreachable code,
because IB/core is responsible sanitize the input.
Link: https://lore.kernel.org/r/20200427154636.381474-15-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no point in redefinition of stable and exposed to users create
flags. Their values won't be changed and it is equal to used by the
mlx5. Delete the mlx5 definitions and use IB/core fields.
Link: https://lore.kernel.org/r/20200427154636.381474-14-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Create initial function for IB_QPT_RAW_PACKET flow.
Link: https://lore.kernel.org/r/20200427154636.381474-13-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Change the common code to use already copied user command buffer.
Link: https://lore.kernel.org/r/20200427154636.381474-12-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Perform validation of DRIVER QP in relevant function.
Link: https://lore.kernel.org/r/20200427154636.381474-11-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of overwriting QP init attributes with driver QP subtype,
use that subtype directly. This change will allow us to remove
logic which cached QP init attributes.
Link: https://lore.kernel.org/r/20200427154636.381474-10-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
DCT QPs have separate creation flow and can be easily extracted
from configure_responder_scat_cqe(), this makes both updated
functions more clear.
Link: https://lore.kernel.org/r/20200427154636.381474-9-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move driver QP creation flow to separate functions to simplify
the create_qp() and allow future separation of create_qp_common()
to subtypes.
Link: https://lore.kernel.org/r/20200427154636.381474-8-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to delay QP subtype assignment to the end of the
create_qp() function and it is better to move it to be immediately
after it is checked so we would be able to rewrite later checks
to be based on it and not on over-written struct ib_qp_init_attr.
Link: https://lore.kernel.org/r/20200427154636.381474-7-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to set NULL in recv_cq and send_cq, they are already
set to NULL by the IB/core logic.
Link: https://lore.kernel.org/r/20200427154636.381474-6-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Unify the QP memory allocation across different paths,
so it will be in one place.
Link: https://lore.kernel.org/r/20200427154636.381474-5-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fast check that kernel and user flows provides enough
data to create QP.
Link: https://lore.kernel.org/r/20200427154636.381474-4-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
GSI QP is created in the kernel with very strict parameters,
there is no possible way that port number will be wrong in
such flow.
Link: https://lore.kernel.org/r/20200427154636.381474-3-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Perform check if QP type is supported in one place at the beginning of
the create_qp function instead of current implementation with checks
buried inside of the code.
Link: https://lore.kernel.org/r/20200427154636.381474-2-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The imm_inval_pkey field can hold four different types of data,
depends on the usage, the data could be one of the below:
- Immediate field of the received message
- Invalidate rkey
- Pkey of the packet
- Flow table metadata
Current implementation doesn't reflect the intended usage of the
field at usage time.
Reflect the different types by replace this field with a union,
modify code where this field is used to reflect its intended
usage.
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The alignment value is part of the input structure, so use it and spare
extra memory allocation when is not needed.
Now, using the new ability when allocating icm for Direct-Rule
insertion.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add COPY type to modify_header action. IPsec feature is the first
feature that needs COPY steering action.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
The call to ->lookup_put() was too early and it caused an unlock of the
read/write protection of the uobject after the FD was put. This allows a
race:
CPU1 CPU2
rdma_lookup_put_uobject()
lookup_put_fd_uobject()
fput()
fput()
uverbs_uobject_fd_release()
WARN_ON(uverbs_try_lock_object(uobj,
UVERBS_LOOKUP_WRITE));
atomic_dec(usecnt)
Fix the code by changing the order, first unlock and call to
->lookup_put() after that.
Fixes: 3832125624 ("IB/core: Add support for idr types")
Link: https://lore.kernel.org/r/20200423060122.6182-1-leon@kernel.org
Suggested-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The commit below modified rvt_create_mmap_info() to return ERR_PTR's but
didn't update the callers to handle them. Modify rvt_create_mmap_info() to
only return ERR_PTR and fix all error checking after
rvt_create_mmap_info() was called.
Fixes: ff23dfa134 ("IB: Pass only ib_udata in function prototypes")
Link: https://lore.kernel.org/r/20200424173146.10970-1-sudipm.mukherjee@gmail.com
Cc: stable@vger.kernel.org [5.4+]
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Encapsulate codes to get status of cqe into a function and use map table
instead of switch-case to reduce cyclomatic complexity of
hns_roce_v2_poll_one().
Link: https://lore.kernel.org/r/1586938475-37049-5-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Removes the unnecessary memset opertaion and adjust style of some lines in
hns_roce_v2_set_mac().
Link: https://lore.kernel.org/r/1586938475-37049-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the unnecessary memset operation and adjust style of some lines in
hns_roce_config_link_table().
Link: https://lore.kernel.org/r/1586938475-37049-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Gary Leshner