When detecting zero in 'dbs' field of CIP header, this packet streaming
should be aborted because of avoiding division-by-zero. This is an error
in an aspect of IEC 61883-1, thus protocol error.
This commit use EPROTO instead of EIO. Actually, the returned value is
not used for userspace and this commit has no effect.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When detecting invalid value in 'dbs' field of CIP header or packet
discontinuity, current implementation reports the status by err_info().
In most cases this state is caused by model-specific issue due to
vendor's customization and should be reported to developers.
This commit use dev_err() instead of dev_info() for this purpose.
In the cases, packet streaming is aborted, thus no message floading
occurs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some macros include my misunderstanding for IEC 61883-1 or -6.
Additionally, some fixed values appear on codes.
This commit replaces these with macros with proper names.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The naming rule for local functions was inconsistent. This commit
rename them with a consistent manner.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Former patches allow non-blocking streams to synchronize with timestamp.
This patch removes the restriction.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In previous commit, error handling for incoming packet processing is
outside of packetization. This is nice for reading the codes.
This commit applies this idea for outgoing packet processing, too.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current implementation reuses the value of syt field in incoming packet to
outgoing packet for full duplex timestamp synchronization, while the number
of data blocks in outgoing packets refers to hard-coded table and the
synchronization cannot be applied to non-blocking stream.
This commit passes the number of data blocks from incoming packet
processing to outgoing packet processing for the synchronization. For
normal mode, isochronous callback handler is changed to generate the values
of syt and data blocks.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This function is called according to conditions between the value of
syt and streaming mode(blocking or non-blocking).
To simplify caller's work, this commit push these conditions to the
function.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In IEC 61883-6, the number of data blocks in a packet is limited up to
the value of SYT_INTERVAL. Current implementation is compliant to the
limitation, while it can cause buffer-over-run when the value of dbs
field in received packet is illegally large.
This commit adds a validator to detect such illegal packets to prevent
the buffer-over-run. Actually, the buffer is aligned to the size of memory
page, thus this issue hardly causes system errors due to the room to page
alignment, as long as a few packets includes such jumbo payload; i.e.
a packet to several received packets.
Here, Behringer F-Control Audio 202 (based on OXFW 960) has a quirk to
postpone transferring isochronous packet till finish handling any
asynchronous packets. In this case, this model is lazy, transfers no
packets according to several cycle-start packets. After finishing, this
model pushes required data in next isochronous packet. As a result, the
packet include more data blocks than IEC 61883-6 defines.
To continue to support this model, this commit adds a new flag to extend
the length of calculated payload. This flag allows the size of payload
5 times as large as IEC 61883-6 defines. As a result, packets from this
model passed the validator successfully.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a helper to create the IEC958 channel status from an ALSA
snd_pcm_runtime structure, taking account of the sample rate and
sample size.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviwed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a helper for the EDID like data structure, which is typically passed
from a HDMI adapter to its associated audio driver. This informs the
audio driver of the capabilities of the attached HDMI sink.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The jack interface is statically included in sound core. Having
doubly module information is rather confusing.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The file is moved to hda core and renamed to hdac_i915.c, so can be used
by both legacy HDA driver and new Skylake audio driver.
- Add snd_hdac_ prefix to the public APIs.
- The i915 audio component is moved to core bus and dynamically allocated.
- A static pointer hdac_acomp is used to help bind/unbind callbacks to get
this component, because the sound card's private_data is used by the azx
chip pointer, which is a legacy structure. It could be removed if private
_data changes to some core structure which can be extended to find the
bus.
- snd_hdac_get_display_clk() is added to get the display core clock for
HSW/BDW.
- haswell_set_bclk() is moved to hda_intel.c because it needs to write the
controller registers EM4/EM5, and only legacy HD-A needs it for HSW/BDW.
- Move definition of HSW/BDW-specific registers EM4/EM5 to hda_register.h
and rename them to HSW_EM4/HSW_EM5, because other HD-A controllers have
different layout for the extended mode registers.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The CA0132 DSP loader leads to NULL deference since the recent
transition to HDA core code, as it unconditionally accesses
hdac_stream->substream->runtime. For DSP loading, the substream
shouldn't be assigned.
This patch addresses the NULL dereference above in addition to assure
the substream is cleared while DSP loading.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98151
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Modern machines tend to have only one headset jack nowadays, and they
often need these quirks. Let's allow them applicable via model
option for ease of debugging.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds quirks detection to the Creative CA0132 codec, and the
quirk for Alienware 15 (2015).
Some quirks may need different pin configuration, so the relevant
compile-time configuration has been removed.
The pin configuration and related initialization verbs are generated at
runtime instead, in ca0132_config() and ca0132_prepare_verbs().
Signed-off-by: Gabriele Martino <g.martino@gmx.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As we now have deferred probing, we can use a custom mechanism and
finally get rid of this legacy interface from the i2c core.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Tested-by: Dan DeVoto <dand1972@yahoo.com>
Tested-by: Mark Elliott <txlitebeer@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
while building with allyesconfig it was giving a build warning about
unused variable. declare the variable only if the driver is built as a
module.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch creates hda_intel_trace.h to add some pm trace functions
used in hda_intel.c
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch does:
1. Rename the hda_intel_trace.h to hda_controller_trace.h as
this trace is used in hda_controller.c
2. Add some trace function for pcm flow.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the trace of snd_hdac_stream_start and snd_hdac_stream_stop.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tegra210 contains a similar codec as Tegra124 and can be supported using
the same patch function.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tegra114 contains the same codec as Tegra124 and can be supported using
the same patch function.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tegra30 contains the same codec as Tegra124 and can be supported using
the same patch function.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When probing, provide accurate error messages to help with debugging
failures.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HDMI codec on NVIDIA Tegra SoCs has a feature that doesn't exist on
the MCP or GPU variants. The highest bit in the vendor-defined scratch
registers can be used to trigger an interrupt in the HDMI codec, which
is signalled to the HDMI driver. This can be used to pass information,
such as the HDA format, to the HDMI driver so that it can reconfigure
itself accordingly.
While at it, change the name of the codec to Tegra124 since there are no
other SoCs in the Tegra12x family. There isn't really a Tegra12x family.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is set for the MCP variants of the NVIDIA HDA controller, which the
Tegra variant was derived from. This fixes the following warning at boot
time:
[ 2.486610] tegra-hda 70030000.hda: CORB reset timeout#1, CORBRP = 0
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell create new platform with ALC298 codec.
This patch will enable headset mode for ALC298/ALC3266 platform.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit [c560a6797e3b: ALSA: core: Remove child proc file elements
recursively] converted snd_card_proc_new() with the normal
snd_info_*() call and removed snd_device chain for such info
entries. However, it misses one point: the creation of the proc entry
was managed by snd_device chain in the former code, and now it's also
gone, which results in no proc files creation at all. Mea culpa.
This patch makes snd_info_card_register() creating the all pending
child proc entries in a shot. Also, since snd_card_register() might
be called multiple times, this function is also changed to be callable
multiple times.
Along with the changes above, now the linked list of snd_info_entry is
added at creation time instead of snd_info_register() for keeping eyes
of pending info entries.
Fixes: c560a6797e ('ALSA: core: Remove child proc file elements recursively')
Reported-by: "Lu, Han" <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_info_free_entry() releases the all children nodes as well, but due
to the wrong timing of releasing the link, the children nodes may be
disconnected but left unreleased. This patch fixes it by moving the
link free at the right position. Also it eases list_for_each_entry()
without _safe option in snd_info_disconnect() because it no longer
frees the children nodes there.
Fixes: c560a6797e ('ALSA: core: Remove child proc file elements recursively')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In SKL, HDMI/DP codec and PCH HD Audio Controller are in different power wells,
so it's necessary to reset display audio codecs when power well on, otherwise
display audio codecs will disappear when resume from low power state.
Reset steps when power on:
enable codec wakeup -> azx_init_chip() -> disable codec wakeup
The callback for codec wakeup enable/disable is in drivers/gpu/drm/i915/.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for enabling codec wakeup override signal to allow
re-enumeration of the controller on SKL after resume from low power state.
In SKL, HDMI/DP codec and PCH HD Audio Controller are in different power
wells, so it's necessary to reset display audio codecs when power well on,
otherwise display audio codecs will disappear when resume from low power
state.
Reset steps when power on:
enable codec wakeup -> azx_init_chip() -> disable codec wakeup
v3 by Jani: Simplify to only support toggling the appropriate chicken bit.
v4 by Han: add explanation and specify the hw swquence.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Building errors reported such as below when 'CONFIG_INPUT=m':
...undefined reference to `input_xxx'...
Here change to enable SND_JACK selectively to fix the issue.
Also remove the config 'SND_HDA_INPUT_JACK' which won't be
used anymore.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Another fixes for NULL jack->input_dev in some places in jack.c.
Fixes: 2ba2dfa1fc ('ALSA: hda - Update to use the new jack kctls method')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is no input_dev for phantom jack, we should not report
input event for it, otherwise, NULL pointer dereference error
will occur.
Fixes: 2ba2dfa1fc ('ALSA: hda - Update to use the new jack kctls method')
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We're providing dummy functions for CONFIG_SND_HDA_i915=n, thus ifdef
can be reduced. (But hda_i915_init() has to be fixed to return zero.)
This automatically fixes a compile warning:
sound/pci/hda/hda_intel.c: In function 'azx_probe_continue':
sound/pci/hda/hda_intel.c:1966:1: warning: label 'i915_power_fail' defined but not used [-Wunused-label]
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For Baytrail (Valleyview) and Braswell (Cherryview), only the HDMI codec is
in the display power well while the HD-A controller isn't. So the controller
flag 'need_i915_power' is not set to release the display power after probe,
and the codec flag 'link_power_control" is set to request/release the display
power via bus link_power ops.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch can improve power saving for Intel platforms on which only the
display audio codec is in the shared i915 power well:
- Add a flag "need_i915_power" to indicate whether the controller needs the
i915 power well.
- The driver will always request the i915 power when probing the controller
and codecs if AZX_DCAPS_I915_POWERWELL is set (either the controller or a
codec needs this power).
- If the controller needs the i915 power, the power will be held after probe
until the controller is runtime suspended or S3. If the controller doesn't
need the power, the power will be released the after probe, and a codec
that needs the power can request/release the power via bus link_power ops.
Background:
- For Haswell/Broadwell, which has a separate HD-A controller for display audio,
both the controller and the display codec are in the i915 power well.
- For Baytrail/Braswell, the display and analog audio share the same HDA
controller and link, and only the display codec is in the i915 power well.
- For Skylake, the display and analog audio share the same HDA controller but
use separate links. Only the display codec is in the i915 power well. And in
legacy mode we take the two links as one. So it can follow Baytrail/Braswell.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch implements the bus link_power ops to request/release i915 display
power well. It can be used by the display codec which shares this power well
with GPU on Intel platforms.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto