Commit Graph

443 Commits

Author SHA1 Message Date
Martyn Welch 6ec9eae67a [WATCHDOG] Enable watchdog timer on GE Fanuc's SBC610
Support for the FPGA based watchdog timer on GE Fanuc's SBC610.

This patch enables one of the watchdog timers found on the SBC610. There are
two identical watchdog timers at different offsets in the above mentioned
boards, however the current driver is only capable of supporting one of them.

The watchdog timers are also capable of generating interrupts at a
user-configurable threshold, though support for this operation is currently
not supported by the driver.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-01-12 20:08:47 +00:00
Kumar Gala 8bd3947afd powerpc/85xx: Add SMP support to MPC8572 DS
Enable SMP support on the MPC8572 DS reference board.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-30 11:30:42 -06:00
Paul Mackerras eddce368f9 Merge branch 'next' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into next 2008-12-17 11:01:43 +11:00
Paul Mackerras 1e1c568d6c Merge branch 'merge' into next 2008-12-16 14:38:58 +11:00
Anton Vorontsov b2c2717bae powerpc/83xx: Enable FIXED_PHY in mpc834x_itx and mpc83xx defconfigs
This is needed so that Vitesse 7385 5-port switch could work on
MPC8349E-mITX boards.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-04 18:47:09 -06:00
Stephen Rothwell 9d2421e834 powerpc/44x: update ppc44x_defconfig
This removes CONFIG_PCI_LEGACY (which is not needed) and consequently
several compiler warnings.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-12-04 08:00:29 -05:00
Hollis Blanchard 23f402c011 powerpc/kvm: update KVM config options in ppc44x_defconfig
KVM host support was recently enabled in ppc44x_defconfig, but since then the
config option was renamed. Update ppc44x_defconfig to match.

Also, KVM guests aren't very interesting without networking, so enable
CONFIG_TUN and CONFIG_BRIDGE.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-12-04 08:00:28 -05:00
Martyn Welch d3a8cdab2f powerpc/86xx: Add use of Epson RTX-8581 RTC to GE Fanuc SBC610 dts
Adding use of newly added Epson RTX-8581 real-time clock driver to GE
Fanuc SBC610's dts file and adding driver to default config.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03 10:47:35 -06:00
Paul Mackerras 11bac8a026 Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6-mpc52xx into merge 2008-11-24 11:53:44 +11:00
Martyn Welch 06597aa90a powerpc: Use generic PHY driver for Marvell 88E1111 PHY on GE Fanuc SBC610
The Marvell PHY driver is currently being used for the 88E1111 on the
SBC610. This driver is causing the link to run in 10/Half mode, the generic
PHY driver is correctly configuring the PHY as 1000/Full.

Edit default config to use generic PHY driver.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-11-19 15:12:17 -06:00
Grant Likely c8d698849e powerpc/virtex: Update defconfigs
Update defconfigs for running on Xilinx Virtex platforms

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-11-14 11:10:55 -07:00
Grant Likely c7c2ffb4fb powerpc/52xx: update defconfigs
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-11-14 10:22:02 -07:00
Paul Mackerras cb8fdc69a2 powerpc: Update desktop/server defconfigs
Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly
took the defaults.  This also updates ppc6xx_defconfig, which covers
the 6xx/7xx/7xxx-based embedded boards.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-11 19:42:30 +11:00
Kumar Gala ea37194d68 powerpc: Updated Freescale PPC related defconfigs
unset CONFIG_PCI_LEGACY in the defconfigs as none of them enable
ISDN drivers which seem to be the only place we are using pci_find_device

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-11-08 12:40:54 -06:00
Paul Mackerras 8694a1c605 Merge branch 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge 2008-10-31 16:08:14 +11:00
Josh Boyer 8531b7a805 powerpc/44x: Update 44x defconfigs
Update the PowerPC 44x defconfigs for 2.6.28

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-30 18:18:46 -04:00
Josh Boyer c4cd9ec48a powerpc/40x: Update 40x defconfigs
Update the PowerPC 40x defconfigs for 2.6.28

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-30 18:16:14 -04:00
Rogério Brito 43271c4128 powerpc: enable heap randomization for linkstations
The current defconfig for Linkstation/Kuroboxes has the "Disable Heap
Randomization" option enabled.

Since some of these machines are facing the internet, it helps to have
heap randomization enabled. This patch enables it.

Signed-off-by: Rogério Brito <rbrito@ime.usp.br>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-28 09:46:44 -05:00
Rogério Brito 3420a982c7 powerpc: compile kernel for linkstations optimized for size
Since Linkstations and Kuroboxes often have *very* little memory (as
they are embedded systems), it is desirable to get their kernels
compiled optimized for size.

Signed-off-by: Rogério Brito <rbrito@ime.usp.br>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-28 09:46:43 -05:00
Guennadi Liakhovetski 22e181ba7f powerpc: fix i2c on PPC linkstation / kurobox machines
The i2c bus defn is broken on linkstation / kurobox machines since at
least 2.6.27. Fix it. Also remove CONFIG_SERIAL_OF_PLATFORM, which, if
enabled, breaks the serial console after the
"console handover: boot [udbg0] -> real [ttyS1]" message.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-28 09:45:57 -05:00
Niklaus Giger 9fa126da4a powerpc/40x: Add support for Netstal HCU4 board
Adds support for a HCU4 PPC405GPr based board from Netstal Maschinen AG.

Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-17 13:28:05 -04:00
Josh Boyer 4cbfc467cc powerpc/40x: Add PowerPC 405EZ Acadia defconfig
Add simple defconfig for the AMCC PowerPC 405EZ Acadia evaluation board

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-17 10:31:19 -04:00
Timur Tabi dbe216319f powerpc: disable CHRP and PMAC support in various defconfigs
Because CHRP and PMAC are by default enabled, several non-CHRP and non-PMAC
PowerPC defconfigs will have these Kconfig options set erroneously.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:59 -05:00
Timur Tabi 3396c72b92 powerpc: Remove CHRP and PMAC support from FSL defconfigs
Fix various defconfigs for Freescale chip based boards to remove
CONFIG_PPC_PMAC or CONFIG_PPC_CHRP which crept in due to those
being default y

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-07 14:26:20 +11:00
Benjamin Herrenschmidt fa6428ebfa Merge commit 'jwb/jwb-next' 2008-10-07 11:15:07 +11:00
Victor Gallardo 3d5fa877bd powerpc/44x: Add AMCC Arches defconfig file
Add a defconfig for the AMCC Arches evaluation board

Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-02 13:08:49 -04:00
Kumar Gala ee1130197e powerpc/86xx: Introduce a generic mpc86xx_defconfig
Introduced a mpc86xx_defconfig that enables all 86xx boards and moved
all other 86xx related defconfigs under configs/86xx to match 83xx
and 85xx.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-23 23:32:32 -05:00
Martyn Welch 1a9314a0f6 powerpc: Default configuration for GE Fanuc SBC610
Support for the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC
MPC8641D).

This is the default config file for GE Fanuc's SBC610, a 6U single board
computer, based on Freescale's MPC8641D.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16 10:17:25 -05:00
Anton Vorontsov 307db95882 powerpc/83xx: mpc836x_mds: add support for the nor flash
This patch adds the localbus node, moves the bcsr node into the
localbus node, and adds the flash node.

Also enable MTD support in the defconfig.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16 10:01:34 -05:00
Heiko Schocher 637166337c powerpc: Add support for mpc8247 based board MGCOGE from keymile.
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16 10:01:32 -05:00
Heiko Schocher e14d4af0c8 powerpc: Add support for the MPC852 based mgsuvd board from keymile.
Supported SMC1 (serial console), SCC3 Ethernet (10Mbps hdx).

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16 10:01:30 -05:00
Paul Mackerras 9bdbb96332 powerpc: Update defconfigs for most non-embedded platforms
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26 13:31:55 +10:00
Geoff Levand 98fded0728 powerpc/ps3: Update ps3_defconfig
Update ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26 10:24:46 +10:00
Kumar Gala 2bb2e1db90 powerpc: Update defconfigs for FSL PPC boards
Since we are updated defconfigs I went ahead and moved the
asp8347_defconfig under 83xx/ and the mpc8536_ds_defconfig under
85xx/ as that is where they should have been to start with.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-21 07:23:03 -05:00
Josh Boyer 9ea7d5ad84 powerpc/4xx: Update defconfig files for 2.6.27-rc1
Update the defconfig files for 4xx boards.  This also makes the mutli-board
defconfigs a bit more useful by enabling some of the more common modules.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-08-06 07:55:37 -04:00
Geoff Levand 72e82dcd1f powerpc/ps3: Update ps3_defconfig
Update ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22 10:39:33 +10:00
Kumar Gala 6e5f153783 powerpc: Add a 6xx defconfig
This is a defconfig from Dave Jones and should be similar (if not
identical) to the fedora ppc32 defconfig.  The intent is to cover all
cache coherent 6xx based chips and platforms as reasonable.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-22 10:39:32 +10:00
Timur Tabi ac8a101480 powerpc: fix ALSA options in Freescale 85xx and 86xx defconfigs
The defconfigs for Freescale 85xx and 86xx SOCs had bad choices for some
audio related options.  In particular, OSS emulation should be enabled,
and the old ALSA API should be disabled.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16 17:59:48 -05:00
Anton Vorontsov a47fda9307 powerpc/86xx: mpc8610_hpcd - add support for ULI RTC
The ULI "Super South Bridge" contains ISA bridge to the legacy
devices, such as Super IO mouse/keyboard/floppy disk controllers,
parallel port, i8259 interrupt controller and so on.

i8259 is disabled on the MPC8610HPCD, and other peripherals are not
traced out. So we use only RTC.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16 17:57:43 -05:00
Sonny Rao fe9e8d5377 powerpc: Add driver for Barrier Synchronization Register
Adds a character driver for BSR support on IBM POWER systems including
Power5 and Power6.  The BSR is an optional processor facility not currently
implemented by any other processors.  It's primary purpose is fast large SMP
synchronization.  More details on the BSR are in comments to the code which
follows.  This patch adds BSR driver to pseries_defconfig.

Signed-off-by: Sonny Rao <sonnyrao@linux.vnet.ibm.com>
Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-15 12:24:55 +10:00
Benjamin Herrenschmidt 930074b6b9 Merge commit 'jwb/jwb-next' 2008-07-15 11:54:57 +10:00
Kumar Gala 2f3804edf9 powerpc/85xx: Add support for MPC8536DS
Add support for the MPC8536 process and MPC8536DS reference board.  The
MPC8536 is an e500v2 based SoC which eTSEC, USB, SATA, PCI, and PCIe.

The USB and SATA IP blocks are similiar to those on the PQ2 Pro SoCs and
thus use the same drivers.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14 07:55:37 -05:00
Wolfgang Grandegger a3083220c0 powerpc/85xx: TQM8548: add missing support for RTC and LM75
It adds the missing RTC node to tqm8548.dts and enables support for
I2C, DS1307 and LM75 in the default configuration.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14 07:55:34 -05:00
Josh Boyer 3fa69dd577 powerpc/44x: Update ppc44x_defconfig
Add the virtex and sam440ep platforms to the multiboard defconfig

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-07-09 14:05:15 -04:00
John Linn 94ec359e45 powerpc/virtex: add defconfig for virtex 5 platforms
This defconfig file is specific to Xilinx Virtex 5 FXT platform.

Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-04 00:59:02 -06:00
Paul Mackerras e9a4b6a3f6 Merge branch 'linux-2.6' 2008-06-30 10:16:50 +10:00
Paul Mackerras 441dbb500b Merge branch 'next' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx 2008-06-30 09:57:05 +10:00
Paul Mackerras 313348db0b [POWERPC] Turn on ATA_SFF so we get SATA_SVW back in defconfigs
This enables CONFIG_ATA_SFF in the defconfigs that are intended to
work on a G5 powermac, i.e. g5_defconfig and ppc64_defconfig.  Since
the support for the SATA cell in the K2 chipset is provided by the
sata_svw.c driver, and that depends on CONFIG_ATA_SFF, we need to turn
that and CONFIG_SATA_SVW back on so we can get to the hard disk on G5s.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-16 21:14:12 +10:00
Giuseppe Coviello b6014e15bc powerpc/4xx: Sam440ep support
The Sam440ep is an high customizable general purpose mini-itx board,
based on the AMCC 440EP and with a LatticeXP FPGA onboard.

It's poduced by ACube Systems Srl (Bassano del Grappa, Italy),
http://www.acube-systems.biz.

Signed-off-by: Giuseppe Coviello <gicoviello@gmail.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-06-11 08:32:49 -04:00
Imre Kaloz 887942d7d6 powerpc/4xx: MTD support for the AMCC Taishan Board
Add support for the NOR flash found on the AMCC Taishan Board
and enable MTD support in the defconfig.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-06-11 08:03:41 -04:00
Anton Vorontsov b13e930906 powerpc/83xx: new board support: MPC8360E-RDK
This is patch adds board file, device tree, and defconfig for the new
board, made by Freescale Semiconductor Inc. and Logic Product Development.

Currently supported:
1. UEC{1,2,7,4};
2. I2C;
3. SPI;
4. NS16550 serial;
5. PCI and miniPCI;
6. Intel NOR StrataFlash X16 64Mbit PC28F640P30T85;
7. Graphics controller, Fujitsu MB86277.

Not supported in this patch:
1. StMICRO NAND512W3A2BN6E, 512 Mbit (supported with FSL UPM NAND driver);
2. FHCI USB (supported with FHCI driver).
3. QE Serial UCCs (tested to not work with ucc_uart driver, reason
   unknown, yet);
4. ADC AD7843 (tested to work, but support via device tree depends on
   major SPI rework, GPIO API, etc);

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10 11:11:17 -05:00
Wolfgang Grandegger 6dd1b64a26 powerpc/85xx: add board support for the TQM8548 modules
This patch adds support for the TQM8548 modules from TQ-Components
GmbH (http://www.tqc.de).

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10 10:33:53 -05:00
Anton Vorontsov f17c63231c [POWERPC] 83xx: MPC837xRDB's VSC7385 ethernet switch isn't on the MDIO bus
MDIO-less PHYs should use CONFIG_FIXED_PHY driver and appropriate
fixed-link property in the device tree.

If not, ethernet will not work:
  e0024520:03 not found
  eth1: Could not attach to PHY
  IP-Config: Failed to open eth1

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10 09:19:26 -05:00
Kumar Gala 70b3ec3e52 [POWERPC] Updated Freescale PPC defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-09 09:12:22 -05:00
Timur Tabi a1072b2597 [POWERPC] 8610: Update defconfig for MPC8610 HPCD
Update the defconfig for the Freescale MPC8610 HPCD board.  Enable module
support.  Disable support for all NICs except for the on-board ULI526x.
Enable support for the Freescale DIU driver.  Increase the maximum zone order
to 12, so that the DIU driver can allocate physically-contiguous 5MB buffers.
Enable SYSV IPC and OSS plugin support, which are needed for some OSS apps.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-09 08:50:43 -05:00
Remi Machet 2059615f37 powerpc: Default configuration for C2K
Support for the C2K cPCI Single Board Computer from GEFanuc
(PowerPC MPC7448 with a Marvell MV64460 chipset).
All features of the board are not supported yet, but the board
boots, flash works, all Ethernet ports are working and PCI
devices are all found (USB and SATA on PCI1 do not work yet).

Part 4 of 5: this is the default config for the board.  In this
configuration the kernel is going to try to boot from MTD
partition 3 on the NOR flash (see c2k.dts for details about
the partitioning of the flash).

Signed-off-by: Remi Machet <rmachet@slac.stanford.edu>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09 13:42:28 +10:00
Paul Mackerras 8a3e1c670e Merge branch 'merge'
Conflicts:

	arch/powerpc/sysdev/fsl_soc.c
2008-06-09 12:19:41 +10:00
Bryan O'Donoghue 59d13f9dba [POWERPC] 83xx: Add support for Analogue & Micro ASP837E board
The following adds support for the Analogue & Micro ASP 8347E, running
Redboot.

http://www.analogue-micro.com/ASP8347.html

Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-02 14:44:25 -05:00
Olof Johansson 732bee4c85 [POWERPC] pasemi: update pasemi_defconfig, enable electra_cf
Refresh pasemi_defconfig and enable ELECTRA_CF=y.

Signed-off-by: Olof Johansson <olof@lixom.net>
2008-05-27 16:11:13 -05:00
Paul Mackerras 09c201219b [POWERPC] Update defconfigs for desktop/server systems
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-20 20:04:12 +10:00
Anton Vorontsov 34b4a8731f [POWERPC] 86xx: mpc8610_hpcd: add support for NOR and NAND flashes
This patch adds device tree nodes for NOR and NAND flashes and places
board-control node inside the localbus.

defconfig and board file updated appropriately.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-13 08:53:48 -05:00
Anton Vorontsov ad12e34fe8 [POWERPC] 86xx: mpc8610_hpcd: use ULI526X driver for on-board ethernet
As of current mainline tree, TULIP driver is unusable on MPC8610HPCD
boards. There is a patch[1] floating around (and also included in the
BSP), which tries to heal the situation, though the ethernet is still
unusable. Practically it takes ages to mount NFS filesystem:

VFS: Mounted root (nfs filesystem).
Freeing unused kernel memory: 180k init
nfs: server 10.0.0.2 not responding, still trying
nfs: server 10.0.0.2 OK
nfs: server 10.0.0.2 not responding, still trying
nfs: server 10.0.0.2 not responding, still trying
nfs: server 10.0.0.2 not responding, still trying
nfs: server 10.0.0.2 not responding, still trying
nfs: server 10.0.0.2 OK
nfs: server 10.0.0.2 not responding, still trying

So, instead of trying to add uli526x functionality into TULIP driver
(which is already bloated enough), I fixed existing ULI526X driver
and now it works perfectly well here.

[1] http://www.bitshrine.org/gpp/0024-MPC8610-ETH-Lyra-native-ethernet.txt

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-13 08:53:48 -05:00
Geoff Levand d9f2f3f537 [POWERPC] PS3: Update ps3_defconfig
Update ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-02 15:00:45 +10:00
Bartlomiej Sieka 8222525216 [POWERPC] mpc5200: defconfigs for CM5200, Lite5200B, Motion-PRO and TQM5200
Board-specific defconfigs based on current mpc5200_defconfig, archival
lite5200_defconfig, and [cm5200|motionpro|tqm5200]_defconfig from the
linux-2.6-denx tree. Kernels build using these defconfigs were verified
to boot with root filesystem mounted over NFS on Motion-PRO, TQM5200
and Lite5200B boards. CM5200 target was not tested due to hardware
unavailability.

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29 07:19:14 -06:00
s.hauer@pengutronix.de 106757b38f [POWERPC] mpc5200: add Phytec pcm030 board support
Add board support for the Phytec pcm030 mpc5200b based board. It
does not need any platform specific fixups and as such is handled
as a mpc5200 simple platform.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29 07:17:12 -06:00
Étienne Bersac 80ff974dba [POWERPC] windfarm: Add PowerMac 12,1 support
This implements a new driver named windfarm_pm121, which drives the
fans on PowerMac 12,1 machines : iMac G5 iSight (rev C) 17" and
20".  It's based on the windfarm_pm81 driver from Benjamin
Herrenschmidt.

This includes fixes from David Woodhouse correcting the names of some
of the sensors.

Signed-off-by: Étienne Bersac <bersace@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29 15:57:35 +10:00
Kumar Gala f9b9908cf9 [POWERPC] 83xx: Enable FCM NAND and OF partitions in defconfig
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:41 -05:00
Paul Gortmaker 1c37dca5e3 [POWERPC] 86xx: Add defconfig for Wind River SBC8641D board
This adds a sample defconfig for the Wind River SBC8641D
board, with SMP, PCI and NFS root enabled.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:41 -05:00
Scott Wood 1e31de7aae [POWERPC] 83xx: mpc8313erdb - Enable FCM NAND and OF partitions in defconfig
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:40 -05:00
Sebastian Siewior 1028d4f162 [POWERPC] 85xx: Enable DMA engine on the MPC8544 DS
Add the device tree node for the DMA engine on 8544, publish
the device and enable the driver in the defconfig.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:36 -05:00
Kumar Gala 370131c3f2 [POWERPC] 83xx/85xx: Reorganize defconfigs
Board specific defconfigs are useful, however with the ability to do
multi-board defconfigs they aren't needed in the top level configs directory

Move the 83xx/85xx board specific defconfigs to individual directories under
arch/powerpc/configs.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:36 -05:00
Josh Boyer 478d5dcb62 [POWERPC] 4xx: Add ppc40x_defconfig
Add a multi-board PowerPC 40x defconfig file

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-16 07:31:57 -05:00
Josh Boyer 975386ee0e [POWERPC] 4xx: Reorganize 4xx defconfigs
Board specific defconfigs are useful, however with the ability to do
multi-board defconfigs they aren't needed in the top level configs directory.

Move the 4xx board specific defconfigs to individual directories under
arch/powerpc/configs.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-15 08:12:57 -05:00
Paul Mackerras ac7c5353b1 Merge branch 'linux-2.6' 2008-04-14 21:11:02 +10:00
Stephen Rothwell a8f75ea70c [POWERPC] Remove CONFIG_PCI_LEGACY from some configs
This will remove some build warnings and doesn't stop us building any
drivers that we were building previously with these configs.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-07 13:49:26 +10:00
Josh Boyer a07e387ae3 [POWERPC] 4xx: Add Canyonlands and Yosemite to multi-board defconfig
Include the newly added Canyonlands and Yosemite ports in the mutli-board
440 defconfig.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-05 18:02:31 -05:00
Paul Mackerras e6b18912d3 Merge branch 'powerpc-next' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc 2008-04-01 20:34:26 +11:00
Kumar Gala 1e85d89fa3 [POWERPC] Fix defconfigs so we dont set both GENRTC and RTCLIB
The new rtc subsystem conflicts with genrtc so don't enable GENRTC
if RTCLIB is enabled.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-31 11:53:46 -05:00
Kim Phillips 58bb7a973b [POWERPC] 83xx: enable usb in 837x rdb and 83xx defconfigs
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-31 10:26:22 -05:00
Alexandr Smirnov 65848f7a0d [POWERPC] 85xx: Emerson KSI8560 default config
Add default config for Emerson KSI8560 board.

Signed-off-by: Alexandr Smirnov <asmirnov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:30:45 -05:00
Stefan Roese 1d60f0fcda [POWERPC] 4xx: Add Canyonlands defconfig file
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:19:17 -05:00
Paul Mackerras 54f53f2b94 Merge branch 'linux-2.6' 2008-03-26 08:44:18 +11:00
Nathan Lynch 4944774d7f [POWERPC] maple: Enable ipr driver in defconfig
Some machines supported by the maple platform have an Obsidian
controller which can't be used without enabling CONFIG_IPR and the
options on which it depends.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:04 +11:00
Olof Johansson 5c29934de2 [POWERPC] update pasemi_defconfig
Disable GEN_RTC since it conflicts with the i2c rtc drivers registering,
besides that keep most of the new defaults.

Signed-off-by: Olof Johansson <olof@lixom.net>
2008-03-25 10:28:26 -05:00
Kumar Gala eff2f1ec37 [POWERPC] Update some defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-24 08:56:06 -05:00
Paul Mackerras 93ce4e2d2d [POWERPC] Update some defconfigs
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20 11:21:32 +11:00
Scott Wood a55387e5ad [POWERPC] 8xx: Fix wrapper platform for adder875, and combine defconfigs.
This fixes the following bug:
http://ozlabs.org/pipermail/linuxppc-dev/2008-February/051979.html

Separate defconfigs are no longer needed now that CONFIG_DEVICE_TREE is gone.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-07 08:42:41 -06:00
Josh Boyer 13dbf42210 [POWERPC] 44x: Add multiplatform defconfig
Add a multiboard defconfig for PowerPC 44x now that the wrapper can create
the proper zImages for multiple boards.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-02-16 08:01:10 -06:00
Josh Boyer 8eb70ea2db [POWERPC] 4xx: Update defconfigs for 2.6.25
Update the 4xx defconfigs to remove WANT_DEVICE_TREE and add MTD_OF_PARTS
where appropriate.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-02-15 22:00:19 -06:00
Kim Phillips e1664ee9f3 [POWERPC] 83xx: Update mpc83xx_defconfig
Enable math emulation and ucc_geth and some PHYs mpc83xx boards use.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05 23:48:06 -06:00
Kumar Gala b38308ac8e [POWERPC] 83xx: rework platform Kconfig
* Allow multiple boards to be selected in a single build
* Removed Kconfig option '83xx' which existed only for compat with arch/ppc
* Removed Kconfig option 'PPC_MPC836x' since its not used
* Renamed Kconfig option 'MPC834x' to 'PPC_MPC834x' to match others
* Added a multiplatform 83xx defconfig (mpc83xx_defconfig).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 13:15:24 -06:00
Kumar Gala 3a83156bd8 [POWERPC] 85xx: rework platform Kconfig
* Allow multiple boards to be selected in a single build
* Removed Kconfig option '85xx' which existed only for compat with arch/ppc
* Added a multiplatform 85xx defconfig (mpc85xx_defconfig). This builds
  all 85xx boards except sbc8560 and stx_gp3 since these to boards have
  board specific ifdef in driver code that may break all other boards

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 13:13:12 -06:00
Kim Phillips 80f4ec7f5b [POWERPC] 83xx: add the mpc837x rdb defconfig
Signed-off-by: Joe D'Abbraccio <ljd015@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:33:08 -06:00
Kim Phillips 71d6fc1d57 [POWERPC] 83xx: add the mpc8315 rdb defconfig
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:33:05 -06:00
Kim Phillips 519fd80da9 [POWERPC] 83xx: fold the mpc8313 platform into the mpc831x platform
prepare for adding support for the mpc8315 rdb, since they are
identical wrt platform code.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:32:59 -06:00
Paul Gortmaker 7607341a26 [POWERPC] 83xx: Add default config file for Wind River SBC8349 board
Default config file for SBC8349 board, suitable for use as with NFS as
a root file system and gianfar as the NFS root device.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:30:57 -06:00
Paul Gortmaker e1e90c6f93 [POWERPC] 85xx: Add default .config file for Wind River SBC8548
This is a suitable .config file for building the WRS SBC8548 kernel
to be used for NFS root via one of the TSEC interfaces and with
serial console via the soc/16550 compatible UART.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:30:53 -06:00
Paul Gortmaker 3ad1f93155 [POWERPC] 85xx: Add default .config file for Wind River SBC8560
This is a suitable .config file for building the WRS SBC8560 kernel
to be used for NFS root via one of the TSEC interfaces and with
serial console via the 16550 compatible UART on the board.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:30:49 -06:00
Kumar Gala 0052bc5d5c [POWERPC] 85xx: Port TQM85xx boards over from arch/ppc
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27 14:10:37 -06:00
Kumar Gala 77e03a2241 [POWERPC] 85xx: Port STX GP3 board over from arch/ppc
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27 14:10:36 -06:00
Paul Mackerras 75e06e2d7d Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx 2008-01-26 15:30:35 +11:00
Sean MacLennan 1c0d3eb583 [POWERPC] 4xx: PIKA Warp defconfig
Add the defconfig for the PIKA Warp board

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25 07:13:20 -06:00
Geoff Levand 335675a3a2 [POWERPC] PS3: Update ps3_defconfig
Update ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25 22:52:53 +11:00
Paul Mackerras dcb571be20 Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.25 2008-01-24 15:29:14 +11:00
Jon Loeliger 96f39c1718 [POWERPC] Add initial storcenter config file.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Andy Wilcox <andy@protium.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:54:39 -06:00
Scott Wood 5f44668c88 [POWERPC] 83xx: Update MPC8313e RDB defconfig for MTD, NAND, JFFS2.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:34:53 -06:00
Scott Wood 0dde1a1df9 [POWERPC] 82xx: Embedded Planet EP8248E support
This board is also resold by Freescale under the names
"QUICCStart MPC8248 Evaluation System" and "CWH-PPC-8248N-VE".

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:34:43 -06:00
Scott Wood b09c16440e [POWERPC] 8xx: Analogue & Micro Adder875 board support.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:34:40 -06:00
Timur Tabi c7d24a2dd0 [POWERPC] Update MPC8610 HPCD to support audio drivers
Update the MPC8610 HPCD files to support the audio driver.  Update
booting-without-of.txt with information on the SSI device.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:34:29 -06:00
Anton Vorontsov 9b6d19dd1d [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes
This patch adds localbus and pata nodes to use CF IDE interface
on MPC8349E-mITX boards.

Patch also adds code to probe localbus.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:33:08 -06:00
Grant Likely 0a0a5af30b [POWERPC] mpc5200: merge defconfigs for all mpc5200 boards
There is no reason to have separate defconfigs for each mpc5200 board.
Instead, here is a common defconfig that can be used for all supported
platforms.

Merging the defconfigs means there are fewer configuration to test when
compile testing all of arch/powerpc and should make support easier.

Supported boards:
	Lite5200(b), Efika, TQM5200, CM5200, MotionPro

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-21 11:22:22 -07:00
Paul Mackerras 52920df4aa Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/olof/pasemi into for-2.6.25 2008-01-17 16:17:58 +11:00
Olof Johansson 9cd55be4d2 [POWERPC] pasemi: Move electra-ide to pata_of_platform
Move electra-ide glue over to the new pata_of_platform framework, and
add the quirks needed to that driver.

Signed-off-by: Olof Johansson <olof@lixom.net>
2008-01-15 10:26:45 -06:00
Hollis Blanchard 5834584e4e [POWERPC] 4xx: enable built-in networking for Sequoia defconfig
Enable EMAC driver for Sequoia (and while we're in there, disable
Macintosh drivers for Sequoia and Bamboo).

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-08 07:43:57 -06:00
Stefan Roese 7e52b48216 [POWERPC] 4xx: Add EMAC support to Kilauea defconfig
Somehow the EMAC support was dropped (or never really added) to the
Kilauea defconfig file. This patch finally adds EMAC support.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-04 12:52:52 -06:00
Paul Mackerras 4f43143f9f Merge branch 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/pasemi 2007-12-31 13:54:13 +11:00
Olof Johansson 90c26375b4 [POWERPC] Enable CONFIG_PCI_MSI and CONFIG_MD in pasemi_defconfig
Enable MSI now that we have an implementation, and enable CONFIG_MD and
the raid options by default as well.

Signed-off-by: Olof Johansson <olof@lixom.net>
2007-12-28 11:02:34 -06:00
Josh Boyer d2d8cfc657 [POWERPC] 4xx: Update defconfigs
Update the 4xx board defconfigs

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-24 19:46:29 -06:00
Josh Boyer 9901162370 [POWERPC] 4xx: Update Kilauea, Rainier, and Walnut defconfigs
Enable PCI support for these eval boards among other things.  Also selects
PCI for Rainier in the Kconfig file.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:41:54 -06:00
Stefan Roese 9a2b77b0da [POWERPC] 4xx: Makalu defconfig
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:37:09 -06:00
Valentine Barshak 309ae1a363 [POWERPC] 4xx: 440GRx Rainier default config
PowerPC 440GRx Rainier default config.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:23:26 -06:00
Benjamin Herrenschmidt 3de9c9cd22 [POWERPC] 4xx: Base support for 440SPe "Katmai" eval board
This adds base support for the Katmai board, including PCI-X and
PCI-Express (but no RTC, nvram, etc... yet).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:14:57 -06:00
Hugh Blemings 6bbc547629 [POWERPC] 4xx: Base support for 440GX Taishan eval board
This patch adds base support for the AMCC Taishan 440GX evaluation
board.

Signed-off-by: Hugh Blemings <hugh@blemings.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:13:33 -06:00
Benjamin Herrenschmidt 619740384c [POWERPC] 4xx: EP405 boards support for arch/powerpc
Brings EP405 support to arch/powerpc. The IRQ routing for the CPLD
comes from a device-tree property, PCI is working to the point where
I can see the video card, USB device, and south bridge.

This should work with both EP405 and EP405PC.

I've not totally figured out how IRQs are wired on this hardware
though, thus at this stage, expect only USB interrupts working,
pretty much the same as what arch/ppc did.

Also, the flash, nvram, rtc and temp control still have to be wired.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:13:14 -06:00
Paul Mackerras c2a7dcad9f Merge branch 'linux-2.6' 2007-12-21 22:21:08 +11:00
Stephen Rothwell 1ce890e036 [POWERPC] Add EHEA and EHCA as modules in the ppc64_defconfig
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-21 22:14:07 +11:00
Paul Mackerras 280bb6b1f7 Merge branch 'for-2.6.24' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge 2007-12-14 16:46:50 +11:00
Michael Ellerman eb8dc843fc [POWERPC] Make PS3_SYS_MANAGER default y, not m
Currently it's impossible to build a ps3_defconfig which will reboot
without modules installed. This makes it all too easy to find yourself
with a PS3 that won't reboot.

This is because the system manager driver, which provides the reboot
mechanism, is only selectable if PS3_ADVANCED is set, else it defaults
to m. In ps3_defconfig PS3_ADVANCED is not set, therefore the system
manager is built as a module.

It would be desirable IMHO for the defconfig to produce a kernel that
boots and reboots, without needing modules to be installed.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-14 16:45:00 +11:00
Scott Wood e8b5f43f7b [POWERPC] 82xx: mpc8272ads, pq2fads: Update defconfig with CONFIG_FS_ENET_MDIO_FCC
This was recently made configurable, and needs to be set for these boards.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-13 22:44:49 -06:00
Li Yang 41bad27ff7 [POWERPC] 83xx: Add MPC837x MDS default kernel configuration
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 13:57:18 -06:00
Ishizaki Kou 24f1f17579 [POWERPC] Update celleb_defconfig to add support for native CBE
Signed-off-by: Kou Ishizaki <Kou.Ishizaki@toshiba.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:41:25 +11:00
Paul Mackerras 43af66e135 [POWERPC] Update defconfigs
This updates all the defconfigs in arch/powerpc/configs except iseries
and ps3, which were updated by the preceding commits.

This mostly takes the defaults, except that I turned on tickless idle
and high-resolution timers for everything, and turned off instrumentation
support and "Fair group CPU scheduler" for the smaller/embedded platforms.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06 16:54:02 +11:00
Geoff Levand b3330def90 [POWERPC] PS3: Update ps3_defconfig
Update ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06 16:09:00 +11:00
Stephen Rothwell d4a76d2bdf [POWERPC] Update iseries_defconfig
The notable changes here are the enabling of NO_HZ and HIGH_RES_TIMERS.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06 16:09:00 +11:00
Grant Likely ad639b9f2c [POWERPC] 83xx: Update mpc8349emitx(gp) defconfig for USB
USB support for the 8349itx got added a while back; but the defconfig
never got updated.  This patch adds the appropriate USB config options
to the defconfigs

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Scott Wood <scottwood@freescale.com>
CC: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-20 15:39:54 -06:00
Anton Vorontsov 04ce7a9767 [POWERPC] 83xx: Update mpc832x_rdb_defconfig to enable MMC-over-SPI
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-20 15:39:54 -06:00
Kim Phillips 27f49807d7 [POWERPC] 8xxx: MDS board RTC fixes
Now the rtc class ds1374 driver has been added, remove the old rtc
driver hookup code, add rtc node to device trees, and turn on the
new driver in the defconfigs.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-20 15:39:54 -06:00
Olof Johansson 7e22fa4a1d [POWERPC] Refresh ppc64_defconfig and enable pasemi-related options
Refresh ppc64_defconfig, add PPC_PASEMI and various options that the
common boards there need:

* Chip drivers (iommu, ethernet, IDE, CF, EDAC, MDIO/PHY)
* PCMCIA
* PATA_PCMCIA
* RTC_CLASS
* SATA_MV
* SATA_SIL24
* IP_PNP + NFS_ROOT for diskless booting

+ possibly some other things I might have missed to list

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:34 +11:00
Olof Johansson 0c83ddfeb4 [POWERPC] pasemi: Update defconfig
Update pasemi_defconfig.  Add a few missing options for default devices
on electra boards, enable tickless and hrtimers, etc, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:33 +11:00
Paul Mackerras 786d3693f4 Merge branch 'for-2.6.24' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge 2007-10-23 22:20:51 +10:00
Josh Boyer 739253765e [POWERPC] 4xx: Enable EMAC on Bamboo board
Fix some device tree omissions that prevented the new EMAC driver from
setting up ethernet on the Bamboo board correctly and update the Bamboo
defconfig.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-19 16:18:35 -05:00
Josh Boyer b3af7a55da [POWERPC] 4xx: Enable EMAC for PPC405 Walnut board
This patch enables the ibm_newemac driver for the Walnut board.  It fixes the
device tree for the walnut board to order the MAL interrupts correctly and
adds the local-mac-address property to the EMAC node.  The bootwrapper is also
updated to extract the MAC address from the OpenBIOS offset where it is stored.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-19 16:18:33 -05:00
Josh Boyer 16fdad334c [POWERPC] 4xx: Enable EMAC on the PPC 440GP Ebony board
Update the Ebony defconfig to enable the ibm_newemac driver.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-19 16:18:29 -05:00
Paul Jackson c2e2c7fa1c task cgroups: enable cgroups by default in some configs
In pre-cgroup cpusets, a few config files enabled cpusets by default.

Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:36 -07:00
Andres Salomon 8f4ce8c32f serial: turn serial console suspend a boot rather than compile time option
Currently, there's a CONFIG_DISABLE_CONSOLE_SUSPEND that allows one to stop
the serial console from being suspended when the rest of the machine goes
to sleep.  This is incredibly useful for debugging power management-related
things; however, having it as a compile-time option has proved to be
incredibly inconvenient for us (OLPC).  There are plenty of times that we
want serial console to not suspend, but for the most part we'd like serial
console to be suspended.

This drops CONFIG_DISABLE_CONSOLE_SUSPEND, and replaces it with a kernel
boot parameter (no_console_suspend).  By default, the serial console will
be suspended along with the rest of the system; by passing
'no_console_suspend' to the kernel during boot, serial console will remain
alive during suspend.

For now, this is pretty serial console specific; further fixes could be
applied to make this work for things like netconsole.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@suspend2.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:19 -07:00
Anton Blanchard 8129535b6b [POWERPC] Enable NO_HZ and high res timers for pseries and ppc64 configs
Enable NO_HZ and high res timers for the ppc64 and pseries defconfigs.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17 22:30:09 +10:00
Anton Blanchard 309a109255 [POWERPC] Enable SLUB in *_defconfig
When checking out the new NO_HZ support in powerpc, I noticed we never
slept for more than 2 seconds.  It turns out SLAB has a 2 second per cpu
timer that causes this.

After switching to SLUB I see some nice 4 second sleeps which is the
limit on this POWER6 box (the decrementer ticks at 512MHz):

slept 4.19 sec
slept 4.19 sec
slept 4.19 sec
slept 4.19 sec
slept 3.96 sec
slept 3.80 sec
slept 2.99 sec

Since SLUB is now the default and some powerpc defconfigs already enable
it, lets enable SLUB across the board for consistency.  While doing this
I also noticed that the maple defconfig has SLAB debugging enabled which
is sure to make your box nice and slow.  Fix that too.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17 22:30:08 +10:00
Paul Mackerras 8087ebd5a1 Merge branch 'for-2.6.24' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.24 2007-10-12 09:06:32 +10:00
Stefan Roese ad656887e2 [POWERPC] 4xx: Kilauea defconfig file
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-11 15:11:08 -05:00
Kumar Gala f5d7d13cd9 [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-11 09:17:22 -05:00
Xianghua Xiao 0e65bfe34c [POWERPC] Add initial MPC8610 HPCD Platform files.
Add basic board support for the MPC8610 HPCD.  This does
not include any support the SoC Display or Audio controllers.

Signed-off-by: Xianghua Xiao <x.xiao@freescale.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Jon Loelier <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08 08:38:31 -05:00
Scott Wood 3611f2ad42 [POWERPC] mpc82xx: Add pq2fads board support.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 11:02:47 -05:00
Scott Wood e00c5498a2 [POWERPC] mpc82xx: Update mpc8272ads, and factor out PCI and reset.
1. PCI and reset are factored out into pq2.c.  I renamed them from m82xx
to pq2 because they won't work on the Integrated Host Processor line of
82xx chips (i.e. 8240, 8245, and such).

2. The PCI PIC, which is nominally board-specific, is used on multiple
boards, and thus is used into pq2ads-pci-pic.c.

3. The new CPM binding is used.

4. General cleanup.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 11:02:44 -05:00
Scott Wood 11c146cc19 [POWERPC] 8xx/wrapper: Embedded Planet EP88xC support
This board is also resold by Freescale under the names
"QUICCStart MPC885 Evaluation System" and "CWH-PPC-885XN-VE".

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 11:02:40 -05:00
Scott Wood 20906ecea2 [POWERPC] 8xx: mpc885ads cleanup
It now uses the new CPM binding and the generic pin/clock functions, and
has assorted fixes and cleanup.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 11:02:38 -05:00
Josh Boyer 504ca43e5e [POWERPC] 4xx: Convert Seqouia flash mappings to new binding
A new binding for flash devices was recently introduced.  This updates the
Sequoia DTS to use the new binding and enabled MTD in the defconfig.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Stefan Roese <sr@denx.de>
2007-09-19 21:13:16 -05:00
Kumar Gala 5d54ddcbcf [POWERPC] 85xx: Add basic Uniprocessor MPC8572 DS port
Added basic board port for MPC8572 DS reference platform that is
similiar to the MPC8544/33 DS reference platform in uniprocessor mode.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:51:54 -05:00
Kumar Gala 16d24060d1 [POWERPC] 85xx: Renamed mpc8544_ds.c to mpc85xx_ds.c
Renamed the mpc8544_ds.c board code to mpc85xx_ds.c to make it more
generic in prep for other boards based on the same platform.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-13 15:43:48 -05:00
Paul Mackerras b2315372ea Merge branch 'linux-2.6' into for-2.6.24 2007-09-14 01:24:25 +10:00
Josh Boyer 7f2814d229 [POWERPC] Walnut defconfig
Walnut board defconfig

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-07 07:51:08 -05:00
Valentine Barshak 38a5d6c9e7 [POWERPC] PowerPC 440EPx: Sequoia defconfig
AMCC PPC440EPx Sequoia default config.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-07 07:48:49 -05:00
Paul Mackerras 13a6976afd [POWERPC] Update defconfigs
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30 16:51:51 +10:00
Kumar Gala 5cc44e086d [POWERPC] Update defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-29 16:47:38 -05:00
Paul Mackerras 35438c4327 Merge branch 'linux-2.6' into for-2.6.24 2007-08-28 15:56:11 +10:00
Arnd Bergmann b22ddc703c [POWERPC] cell: Update cell_defconfig for 2.6.23
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25 16:58:27 +10:00
Josh Boyer 8c1449bdb4 [POWERPC] Bamboo board support
Add support for the AMCC Bamboo board

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-08-20 07:30:14 -05:00
David Gibson 0d279d4761 [POWERPC] Fixes to allow use of Ebony's flash chips through physmap_of
This patch contains a handful of small fixes to allow the Ebony's
flash to be exposed as MTD devices via the physmap_of driver.
Specifically it:
	- Makes a small addition to the device tree and zImage wrapper
to record the correct address for the flash in the device tree based
on the board switches as reported via an FPGA register.
	- Prohibits building the old hard-coded "Ebony" flash map on
arch/powerpc kernels, in favour of using physmap_of's device tree
based approach.
	- Enables MTD and physmap_of in the Ebony defconfig.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:51 +10:00
geoffrey.levand@am.sony.com bd948b0377 [POWERPC] PS3: Update ps3_defconfig
Update ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:22 +10:00
Rafael J. Wysocki b0cb1a19d0 Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION
Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid
confusion (among other things, with CONFIG_SUSPEND introduced in the
next patch).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29 16:45:38 -07:00
Roy Zang f16dab981a [POWERPC] Add basic PCI/PCI Express support for 8544DS board
Add basic support for the PCIe PHB and enable the ULI bridge.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 22:30:02 -05:00
Kumar Gala aa3c112146 [POWERPC] 85xx: Added 8568 PCIe support
Added the PCIe device node to the 8568 dts and the needed quirk entries.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 10:27:08 -05:00
Robert P. J. Day f8eb77d6fb [POWERPC] Fix misspelled "CONFIG_CHECK_CACHE_COHERENCY" Kconfig option.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-22 21:30:58 +10:00
Bob Nelson 1474855d08 [CELL] oprofile: add support to OProfile for profiling CELL BE SPUs
From: Maynard Johnson <mpjohn@us.ibm.com>

This patch updates the existing arch/powerpc/oprofile/op_model_cell.c
to add in the SPU profiling capabilities.  In addition, a 'cell' subdirectory
was added to arch/powerpc/oprofile to hold Cell-specific SPU profiling code.
Exports spu_set_profile_private_kref and spu_get_profile_private_kref which
are used by OProfile to store private profile information in spufs data
structures.

Also incorporated several fixes from other patches (rrn).  Check pointer
returned from kzalloc.  Eliminated unnecessary cast.  Better error
handling and cleanup in the related area.  64-bit unsigned long parameter
was being demoted to 32-bit unsigned int and eventually promoted back to
unsigned long.

Signed-off-by: Carl Love <carll@us.ibm.com>
Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: Bob Nelson <rrnelson@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
2007-07-20 21:42:24 +02:00
Paul Mackerras bf22f6fe2d Merge branch 'for-2.6.23' into merge 2007-07-11 13:28:26 +10:00
Kumar Gala 795bb15e07 [POWERPC] Update defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-02 00:04:36 -05:00
Geoff Levand e4eb8cf0ae [POWERPC] PS3: Update ps3_defconfig
Update ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:18:06 +10:00
Paul Mackerras ca74c01344 [POWERPC] Update defconfigs
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-26 14:38:47 +10:00
will schmidt d30d6badd1 [POWERPC] Update g5_defconfig
Update the g5_defconfig with default settings.
This is to keep things up to date, and specifically to ensure that the
CONFIG_MACINTOSH_DRIVERS option is enabled.  This also turns on
CONFIG_MSI.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
cc: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-26 14:38:42 +10:00
Mark A. Greer b0e80206cc [POWERPC] Update holly to use new dts wrapping feature
The holly support currently has separate rules to wrap its device tree
with its zImage.  This can now be done automatically without the extra
rules so update holly support to use the automatic feature.

Signed-off-by: Mark A. Greer <mgreer@mista.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-25 17:02:04 +10:00
David Gibson e60c526fba [POWERPC] Don't store a command line in the Holly device tree
Currently, the Holly device tree includes a bootargs property in
/chosen, which gives a commandline.  This is somewhat inconvenient,
because it means an alternative default command line can't be given in
the kernel config - the value obtained from the dts via the
bootwrapper will always override CONFIG_CMDLINE.

This removes the command line from the dts, and instead puts the
same command line as a default in holly_defconfig.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14 22:30:17 +10:00
Christian Krafft 0453c62c80 [POWERPC] cell_defconfig: Disable cpufreq and pmi
Cpufreq using pmi is broken by a dependency issue, that
will be fixed in a seperate patch.
Bare-metal cpufreq is broken by hardware limitations.
As it was the only user, pmi is disabled as well.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-17 21:11:14 +10:00
Olof Johansson 63df81ec3b [POWERPC] Update pasemi_defconfig
Update pasemi_defconfig, add new relevant drivers. Take out
CONFIG_PPC_PSERIES, it should't have been enabled in the first place.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-17 21:11:14 +10:00
Stephen Rothwell cbb0503742 [POWERPC] Update iseries_defconfig
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-17 21:11:13 +10:00
Dale Farnsworth fd4ba7e2b7 [POWERPC] Add arch/powerpc support for the Motorola PrPMC2800
This finally adds the PPC_PRPMC2800 Kconfig option, the board setup
code (the setup and reset functions) and the defconfig, to support the
Motorola PrPMC2800 platform.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 11:32:50 +10:00
Geoff Levand 36bd2836f3 [POWERPC] PS3: Update ps3_defconfig
Update ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 11:32:48 +10:00
Ishizaki Kou 4cc81aac8b [POWERPC] celleb: Update celleb_defconfig
Updates for celleb_defconfig.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-10 21:28:12 +10:00
David Gibson f6dfc80554 [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc
This adds platform support code for the Ebony (440GP) evaluation
board.  This includes both code in arch/powerpc/platforms/44x for
board initialization, and zImage wrapper code to correctly tweak the
flattened device tree based on information from the firmware.  The
zImage supports both IBM OpenBIOS (aka "treeboot") and old versions of
uboot which don't support a flattened device tree.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 14:47:32 +10:00
Josh Boyer 897fd81795 [POWERPC] Holly defconfig
Holly/Hickory defconfig

Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 11:54:20 +10:00
Geoff Levand 0cd74f398a [POWERPC] PS3: Defconfig updates
Updates to ps3_defconfig for linux-2.6.21.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:31 +10:00
Kim Phillips 543e51c0e1 [POWERPC] Turn on corresponding PHY drivers in QE UEC platforms defconfigs
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:29 +10:00
Michael Ellerman 6cfef5b27e [POWERPC] Rename MPIC_BROKEN_U3 to MPIC_U3_HT_IRQS
Rename MPIC_BROKEN_U3 to something a little more descriptive. Its
effect is to enable support for HT irqs behind the PCI-X/HT bridge on
U3/U4 (aka. CPC9x5) parts.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:06:58 +10:00
Arnd Bergmann c6d344819e [POWERPC] update cell_defconfig
Sync with the Kconfig changes, and enable some options for celleb

Cc: Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Jens Osterkamp <jens@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:44:41 +02:00
Paul Mackerras e049d1ca30 Merge branch 'linux-2.6' into for-2.6.22 2007-04-13 03:50:03 +10:00
Jon Loeliger edfac96a92 [POWERPC] 85xx: Add initial MPC8544DS basic port defconfig.
Signed-off-by: Xianghua Xiao <x.xiao@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-29 19:39:51 -05:00
Michael Barkowski 23308c54d5 [POWERPC] 83xx: Add MPC832x RDB board support.
Add support for the MPC8323E Reference Development Board (RDB).  The board
is a mini-ITX reference board with 64M DDR2, 16M flash, USB, PCI,
10/100 ethernet, serial, and phone ports.

Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-29 14:54:39 -05:00
Arnd Bergmann c886c2bf80 [POWERPC] update cell_defconfig
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-03-10 00:07:52 +01:00
Kumar Gala 56d7b79402 Merge branch '85xx' into for_paulus 2007-02-17 16:32:46 -06:00
Kumar Gala 23f510bcd3 [POWERPC] 85xx: Renamed MPC8568 MDS board code to match other boards
Renamed the MPC8568 MDS platform code to follow other 85xx boards.  There
isn't anything specific about the 8568 MDS code that wouldn't apply to another
85xx MDS system at this point.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-17 16:29:36 -06:00
Kumar Gala be156bed9e [POWERPC] 83xx: Renamed MPC8323 MDS dts and defconfig to match other boards
Renamed the MPC8323 MDS and defconfig to match the naming convention followed
by other MDS boards.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-17 10:16:18 -06:00
Kumar Gala 322d05a1c4 [POWERPC] 83xx: Updated and renamed MPC8360PB to MPC836x MDS
The MPC836x PB board is really just one part of the MPC836x MDS.  We currently
name all other PB boards as MDS.  Removed all references to PB and replaced
with MDS.  Additionally renamed the .dts to match the defconfig (mpc836x_mds*).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-17 10:13:56 -06:00