Commit Graph

18306 Commits

Author SHA1 Message Date
Peter Ujfalusi 64ebdec36a ASoC: davinci-mcasp: Rename the pointer to davinci dma_params as dma_params
It is quite confusing to name the pointer to davinci_pcm_dma_params as
dma_data. Rename the pointer to avoid confusion.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-09 08:33:53 +00:00
Charles Keepax d0800342bb ASoC: arizona: Support new fratio encoding on the wm5110 rev D
The reference clock path on newer IP FLLs requires a different
configuration, and should avoid integer mode operation. This patch adds
support for both the new encoding and updates the calculation.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-09 08:28:07 +00:00
Charles Keepax 5a3935c764 ASoC: arizona: Calculate FLL gain last
No part of the FLL calculation depends on the value determined for the
gain but the gain does depend on other values. In preparation for future
updates this patch moves the gain to be the last thing calculated.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-09 08:28:07 +00:00
Charles Keepax f641aec62c ASoC: arizona: Calculate OUTDIV first
OUTDIV will remain unchanged whilst the rest of the FLL configuration is
calculated so do this first.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-09 08:28:06 +00:00
Charles Keepax 8ccefcd265 ASoC: arizona: Don't pass Fout into arizona_calc_fll
As we now calculate the FLL configuration at a later stage in the
process the fout member of the FLL structure will contain the desired
Fout frequency so no need to pass this in seperately.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-09 08:28:06 +00:00
Charles Keepax 23f785a8bc ASoC: arizona: Move calculation of FLL configuration
Currently the FLL configuration is calculated before it is known which
FLL path the configuration will be applied to. Newer versions of the IP
have differences in the configuration required for each FLL path, which
makes it complicated to calculate the FLL configuration in advance.

This patch simply checks the validity of a requested input and output
frequency before we know which FLL path they will be applied to and
saves the actual calculation of the configuration until we know where
the settings will be applied.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-09 08:28:06 +00:00
Charles Keepax 61719db814 ASoC: arizona: Move set of OUTDIV in to arizona_apply_fll
Since we know in arizona_apply_fll if we are setting the sync or ref
path there is no need to set the outdiv seperately anymore. This patch
moves this from arizona_enable_fll to arizona_apply_fll.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-09 08:28:06 +00:00
Charles Keepax 87383ac5a7 ASoC: arizona: Add defines for FLL configuration constants
Improve readability by adding defines for some of the constants
associated with FLL configuration.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-09 08:28:06 +00:00
Charles Keepax da28ed585b ASoC: arizona: An OUTDIV of 1 is not valid, avoid this
One is not a valid value for the OUTDIV start searching at 2 instead.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-09 08:28:06 +00:00
Max Filippov 40423285a1 ASoC: tlv320aic23: add missing EXPORT_SYMBOLs
This fixes the following build errors when aic23 is configured as
module:

>> ERROR: "tlv320aic23_probe"
>> [sound/soc/codecs/snd-soc-tlv320aic23-i2c.ko] undefined!
>> ERROR: "tlv320aic23_regmap"
>> [sound/soc/codecs/snd-soc-tlv320aic23-i2c.ko] undefined!

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-09 08:04:57 +00:00
Mark Brown e97db9abf9 ASoC: pcm512x: Fix duplicate const warning
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-09 07:38:23 +00:00
Mark Brown 22066226b5 ASoC: pcm512x: Split out bus drivers
Move to the new style of defining the bus interfaces in separate modules
in order to simplify dependencies.

Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-09 07:38:22 +00:00
Takashi Iwai 9b745ab897 ALSA: hda - Fix loud click noise with IdeaPad 410Y
Lenovo IdeaPad 410Y with ALC282 codec makes loud click noises at boot
and shutdown.  Also, it wrongly misdetects the acpi_thinkpad hook.
This patch adds a device-specific fixup for disabling the shutup
callback that is the cause of the click noise and also avoiding the
thinpad_helper calls.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=71511
Reported-and-tested-by: Guilherme Amadio <guilherme.amadio@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-07 08:37:19 +01:00
Mark Brown 8db0d35bee Merge branch 'topic/tlv320aic23' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-fsl
Conflicts:
	sound/soc/fsl/Kconfig
2014-03-07 11:05:07 +08:00
Mark Brown 8b621d0fae Merge branch 'topic/tlv320aic23' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-samsung 2014-03-07 10:59:36 +08:00
Max Filippov cc1bc54aa7 ASoC: update Kconfig of AIC23 users to select I2C variant
Now that AIC23 supports two control interfaces all existing I2C users
should select I2C variant.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-07 10:55:33 +08:00
Max Filippov b3fc572596 ASoC: tlv320aic23: add support for SPI control mode
tlv320aic23 chip control interface may work in either I2C or SPI mode
depending on the MODE pin state. Functionality and register layout are
independent of the control mode.

Implement bus-specific parts as separate modules.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-07 10:55:33 +08:00
Liam Girdwood a8282136a1 ASoC: Intel: Clean up indentation for Haswell machine driver/Kconfig
Clean up some indentation.

Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-07 10:51:05 +08:00
Liam Girdwood dd6646bcfa ASoC: Intel: Use .dai_fmt for setting Haswell BE format.
Update the Haswell driver to use .dai_fmt in DAI link to set the
format.

Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-07 10:51:05 +08:00
Liam Girdwood f69f41e1a2 ASoC: Intel: Check Haswell IPC process_reply/notification return value.
Check the return value for error when processing replies and notifications.

The patch 22981243589c: "ASoC: Intel: Add Haswell/Broadwell IPC" from
> Feb 20, 2014, leads to the following imaginary static checker warning:
>
> 	sound/soc/intel/sst-haswell-ipc.c:898 hsw_irq_thread()
> 	warn: this is always true.
>
> sound/soc/intel/sst-haswell-ipc.c
>    895                  /* Handle Immediate reply from DSP Core */
>    896                  handled = hsw_process_reply(hsw, ipcx);
>                                   ^^^^^^^^^^^^^^^^^
> Returns 1 on success/error and -EIO on error.
>
>    897
>    898                  if (handled) {
>    899                          /* clear DONE bit - tell DSP we have completed */
>    900                          sst_dsp_shim_update_bits_unlocked(sst, SST_IPCX,
>    901                                  SST_IPCX_DONE, 0);
>    902
>    903                          /* unmask Done interrupt */
>    904                          sst_dsp_shim_update_bits_unlocked(sst, SST_IMRX,
>    905                                  SST_IMRX_DONE, 0);
>    906                  }
>

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-07 10:51:05 +08:00
Charles Keepax fab800cc33 ASoC: wm_adsp: Correct type specifier in printf
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-07 10:38:14 +08:00
Nenghua Cao a1a564ed6a ASoC: core: use regmap's parse_val to do endian translation
In snd_soc_bytes_put function, it forces cpu to do cpu_to_be translation,
but for mmio bus which uses REGMAP_ENDIAN_NATIVE, it doesn't need to do
endian translation. So it is better to use regmap's api which can decide
if this translation is needed according to bus configuration.

Signed-off-by: Nenghua Cao <nhcao@marvell.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 17:46:31 +08:00
Mark Brown d083f580e5 regmap: Add parse_val() API
This is useful for generic code built on top of regmap dealing with
 blocks of data.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTGEMzAAoJELSic+t+oim9HHEP/Rcw848w6mBeN7qKVAjI01a2
 SsIyFAcriP00XO6HiiB8WbFrApD0nbKinDKRmNvRKqPEdh45haNIfSllDBuvYSml
 Zw9NJSfszGpfwa5NzFnJW61+piBvh/vpzdHbmscFrDNOOepgUTS4rEOnoSwX3FtD
 MlmIUKCEo4pzZiPwJYzznay/Dd5ckBBtmt5KYWaswk0okQoVX5TVBkv/61ZWl44W
 gYQxDHqPsdSRXDCAlLNfZJjgPjk5lN8vqeHcL1JsKr03DCiV5HV02wbnS9oGYqs4
 407ahH4Wn0xr4GipAB/DHUKqQVarEMh55h+7IgjAG2mC86KDSlYcq5/wE1yOrl9c
 6MtmzglFb2c0ClQK5T64c6Hls0FqojleBAu5eaeSNVrMLFiQIGJqnKhfUPTUJNLa
 4HQ4HXiGpuRfcCZJmzWrYJzhJO6RiwWQfybcx0CDQ7b77TdpOO01TkJLQwOfCk5w
 mSRNzLquVgCu66T0e9tf3de8S5aW402FaQTIegWLkWkAG+pv/NhwbFvf7Z/LwdAr
 ruBCxdQWfYGvRolaohPcyh2HaxGurHSttA6KIeSxcMhPKs4lCOHWNbo9ntqUorLs
 bpvlPFlrpvtrYv1CUZbVIvMZmjdEo9LVeXEtyYz7kILsGV2EJbYY5RoCBCYeo+7R
 rZLnetDc2yXLv/HAqAZ8
 =uRux
 -----END PGP SIGNATURE-----

Merge tag 'parse-val' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into asoc-core

regmap: Add parse_val() API

This is useful for generic code built on top of regmap dealing with
blocks of data.
2014-03-06 17:44:28 +08:00
Rongjun Ying af12a31f05 ASoC: sirf: Add SiRF audio card
This connects platform DAI, SiRF internal audio codec DAI  and
SiRF auido port DAI together and works as a mach driver.

Signed-off-by: Rongjun Ying <rongjun.ying@csr.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 17:21:56 +08:00
Rongjun Ying a731e217df ASoC: sirf: Add SiRF audio port driver is used by SiRF internal audio codec
This driver is used by SIRF internal audio codec.
Use dedicated SiRF audio port TXFIFO and RXFIFO
Supports two DMA channels for SiRF audio port TXFIFO and RXFIFO
The audio port like as audio bus such as i2s.

Signed-off-by: Rongjun Ying <rongjun.ying@csr.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 17:20:08 +08:00
Mark Brown 6af5263cea Merge branch 'topic/pcm' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-enum
Conflicts:
	include/sound/soc.h
2014-03-06 17:07:39 +08:00
Lars-Peter Clausen 3d59400fe4 ASoC: Move ignore_pmdown_time from CODEC to component
In preparation for componentization move the ignore_pmdown_time field from the
snd_soc_codec struct to the snd_soc_component struct. Set it to true for non
CODEC components for now.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 17:04:56 +08:00
Lars-Peter Clausen cdde4ccb14 ASoC: Move active count from CODEC to component
There is no reason why active count tracking should only be done for CODECs but
not for other components. Moving the active count from the snd_soc_codec struct
to the snd_soc_component struct reduces the differences between CODECs and other
components and will eventually allow component to component DAI links (Which is
a prerequisite for converting CODECs to components).

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 17:04:55 +08:00
Lars-Peter Clausen 6106d12947 ASoC: Add component pointer to the DAI struct
Keep track of which component registered a DAI. We'll need this as
componentization progresses.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 17:04:55 +08:00
Lars-Peter Clausen 5c898e74d1 ASoC: Add helper function to check whether a CODEC is active
Instead of directly checking the 'active' field of the CODEC struct add a new
helper function that will return either true or false depending on whether the
CODEC is active. This will make the migration to the component level easier.

The patch also updates all CODEC drivers that check the active attribute to use
the new helper function.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 17:04:55 +08:00
Lars-Peter Clausen a1a0cc0646 ASoC: Fix active count tracking for CODEC to CODEC links
For CODEC to CODEC links we need to make sure to also manage the 'active' field
of the cpu_dai CODEC.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 17:04:55 +08:00
Lars-Peter Clausen 24894b7646 ASoC: Add helper functions for PCM runtime 'active' management
We have the same code that increments and decrements the active field of the
various PCM runtime components (all with the same bugs). Factor this out into
common helper functions.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 17:04:55 +08:00
Lars-Peter Clausen 208a1589db ASoC: Handle ignore_pmdown_time for CODEC to CODEC links
For CODEC to CODEC links we should only immediately power down if both CODECs
are configured to ignore the power down delay. Factor the logic for this
into a helper function that can be used for both compressed and normal PCMs.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 17:04:55 +08:00
Rongjun Ying f516e368dc ASoC: sirf: Add SiRF internal audio codec driver
SiRF internal audio codec is integrated in SiRF atlas6 and prima2 SoC.
Features include:
1. Stereo DAC and ADC with 16-bit resolution amd 48KHz sample rate
2. Support headphone and/or speaker output
3. Integrate headphone and speaker output amp
4. Support LINE and MIC input
5. Support single ended and differential input mode

Signed-off-by: Rongjun Ying <rongjun.ying@csr.com>
--v5:
1. Drop all inlines.
2. Reordering the Kconfig and Makefile
3. Remove the sirf_audio_codec_reg_bits struct, use the new controls instead it.
4. Add some SND_SOC_DAPM_OUT_DRV instead of HP and SPK enable driver
5. Add audio codec clock supply instead of adc event callback
6. Fixed playback and capture can't concurrent work bug.

--
 .../devicetree/bindings/sound/sirf-audio-codec.txt |   17 +
 sound/soc/codecs/Kconfig                           |    5 +
 sound/soc/codecs/Makefile                          |    1 +
 sound/soc/codecs/sirf-audio-codec.c                |  533 ++++++++++++++++++++
 sound/soc/codecs/sirf-audio-codec.h                |   75 +++
 5 files changed, 631 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/sirf-audio-codec.txt
 create mode 100644 sound/soc/codecs/sirf-audio-codec.c
 create mode 100644 sound/soc/codecs/sirf-audio-codec.h
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 15:59:19 +08:00
Charles Keepax c1a7898d65 ASoC: wm_adsp: Split firmware load into smaller chunks
The firmware files can be quite large and allocating the whole firmware
a single DMA safe buffer can be problematic if the system is under a
high memory load. Ease the requirements slightly by writing the firmware
out in page sized chunks.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 12:34:31 +08:00
Takashi Iwai 9c369c6e88 ASoC: cs4271: Fix build error without CONFIG_SPI_MASTER
cs4271_common_probe() is called from cs4271_i2c_probe() but defined in
CONFIG_SPI_MASTER block, thus it results in a build error when
CONFIG_SPI_MASTER=n:
  sound/soc/codecs/cs4271.c:721:2: error: implicit declaration of function ‘cs4271_common_probe’ [-Werror=implicit-function-declaration]

Move the function out of #if block.

Fixes: d6cf89ee07 ('ASoC: cs4271: claim reset GPIO in bus probe function')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Daniel Mack <daniel@zonque.org>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 12:31:39 +08:00
Dan Carpenter 9202c37739 ASoC: Baytrail: fix error handling in sst_byt_dsp_init()
Calling "kfree(byt)" is a double free because that was allocated with
devm_kzalloc().  There were a couple places which leak "byt->msg".  That
memory is allocated in msg_empty_list_init().

Fixes: f7d01fd675 ('ASoC: Intel: Add Intel Baytrail SST DSP IPC support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 12:22:21 +08:00
Takashi Iwai e805ca8b0a ALSA: usb-audio: Add quirk for Logitech Webcam C500
Logitech C500 (046d:0807) needs the same workaround like other
Logitech Webcams.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-05 12:37:15 +01:00
Takashi Iwai 4913cd6964 ALSA: emu10k1: Fix possible NULL dereference
The previous dev_err() conversion resulted in a code that may give
NULL dereference in snd_emu10k1_ptr_write().  Since it's a sanity
check, better to be replaced with a debug macro like other places in
this driver.

Fixes: 6f002b0216 ('ALSA: emu10k1: Use standard printk helpers')
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-05 12:15:56 +01:00
Dan Carpenter 4f50b41fa3 ALSA: echoaudio: use after free on error
There are some places where we dereference "chip" in the error message
but we've already freed it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-05 12:11:54 +01:00
Dan Carpenter 7cf9bb21ee ALSA: lola: NULL deref on allocation error
"chip" is NULL here.  We don't need a printk here because kmalloc() has
it built in.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-05 12:10:15 +01:00
Takashi Iwai f3e9b59cb9 ALSA: hda - Use analog beep for Thinkpads with AD1984 codecs
For making the driver behavior compatible with the earlier kernels,
use the analog beep in the loopback path instead of the digital beep.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-05 12:00:29 +01:00
Takashi Iwai c5eda4c1bf ALSA: hda - Add missing loopback merge path for AD1884/1984 codecs
The mixer widget (NID 0x20) of AD1884 and AD1984 codecs isn't
connected directly to the actual I/O paths but only via another mixer
widget (NID 0x21).  We need a similar fix as we did for AD1882.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-05 11:52:24 +01:00
Kuninori Morimoto 81985bd63f ASoC: simple-card: tidyup cpu/codec dai_fmt settings for non-DT
30d0341e7d
(ASoC: simple-card: simplify the daifmt code)
simplify cpu/codec dai_fmt which consists from
dai specific format + common format.
But, it didn't care about non-DT case.
This patch fixes it

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05 14:10:47 +08:00
Kuninori Morimoto ba9c949f79 ASoC: rsnd: rename scu to src
R-Car sound has SCU unit which has SRC/CTU/MIX/DVC,
and current rsnd driver has scu.c and scu module.
Current scu.c has SRC support only.
My first concept was control these feature on scu.c
but, it become difficult and un-understandable now.
This patch rename scu to src

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05 14:07:53 +08:00
Kuninori Morimoto 9524be0e76 ASoC: rsnd: remove all rsnd_xxx_remove()
Now, rsnd_xxx_remove() do nothing.
remove these

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05 14:07:53 +08:00
Kuninori Morimoto 4076220767 ASoC: rsnd: nothing to do on rsnd_dai_remove()
rsnd_dai_remove() called rsnd_path_exit(),
but these memory will be cleaned automatically.
Because it is created by devm_kzalloc().
nothing to do on rsnd_dai_remove()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05 14:07:53 +08:00
Kuninori Morimoto ff8f30e688 ASoC: rsnd: use mod probe method on SSI
Now, it can use .probe

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05 14:07:53 +08:00
Kuninori Morimoto 76c6fb5c49 ASoC: rsnd: use mod probe method on SCU
Now, it can use .probe

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05 14:07:53 +08:00
Kuninori Morimoto 7681f6ac6b ASoC: rsnd: add probe/remove callback on rsnd_mod_ops
Each rsnd mod needs specific probe method,
and its best timing is DAI probe timing.
But current code runs it mod probe timing.
This patch adds new probe/remove callback to solve it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05 14:07:52 +08:00
Kuninori Morimoto 221bf523e3 ASoC: rsnd: call rsnd_scu_ssi_mode_init() from SSI
Current R-Car sound driver is assuming that
SCU mod is used even though it is not needed.
Because scu.c is controlling SSIU too.
(it is Gen1 compatibility)
But, SCU mod will be really not used if new platform dai
feature was added.
Thus, rsnd_scu_ssi_mode_init() is called from SSI
directory by this patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05 14:07:52 +08:00
Kuninori Morimoto b8cc41e9e8 ASoC: rsnd: add rsnd_scu_enable_ssi_irq()
Current R-Car sound driver is assuming that
SCU mod is used even though it is not needed.
Because scu.c is controlling SSIU too.
(it is Gen1 compatibility)
But, SCU mod will be really not used if new platform dai
feature was used.
Thus, SSIU irq setting is called from SSI
directory by this patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05 14:07:52 +08:00
Kuninori Morimoto 389933d9f6 ASoC: rsnd: Get correct SCU ID
Current rsnd driver is assuming that SCU/SRU ID is
same as SSIU/SSI ID, because Gen1 can't select it.
But, Gen2 can select it.
The SCU/SRU/SSIU/SSI pair depends on the platform.
This patch get correct SCU ID from platform info.
To keep compatible, it still assuming SCU ID = SSI ID
if platform doesn't have info

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05 14:07:52 +08:00
Kuninori Morimoto 78f13d0c5a ASoC: rsnd: add struct rsnd_dai_platform_info
R-Car sound DAI consists from SSI/SCU/SSIU/SRU...
Current R-Car sound DAI is decided from these settings,
but it is intuitively unclear, and is not good design for DT support.
This patch adds new rsnd_dai_platform_info to solve this issue.

But now, many platform is using this driver without
rsnd_dai_platform_info.
So, this patch still supports DAI settings via SSI to keep compatible.
It will be removed in next Linux version.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05 14:07:52 +08:00
Patrick Lai e4ad1accb2 ASoC: pcm: free path list before exiting from error conditions
dpcm_path_get() allocates dynamic memory to hold path list.
Corresponding dpcm_path_put() must be called to free the memory.
dpcm_path_put() is not called under several error conditions.
This leads to memory leak.

Signed-off-by: Patrick Lai <plai@codeaurora.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
2014-03-05 11:40:39 +08:00
Lars-Peter Clausen 57d4325a4f ASoC: ak4104: Remove superfluous codec->control_data initialization
The driver uses automatic IO setup, which will also initialize the control_data
field of the CODEC, no need to do it manually.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05 09:25:36 +08:00
Mark Brown d433570d9c ASoC: fsl: Don't select FIQ from Eukrea
There is no point in using FIQ if DMA is available (it is selected) and
selecting FIQ currently breaks the build on non-i.MX platforms.  If FIQ
is actually required the build will need to be restricted or have a
select for the relevant FIQ code adding.

Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05 09:14:51 +08:00
Mark Brown d4179c1dea ASoC: da732x: Replace hw_read usage with snd_soc_read()
Pre-merge code was using direct hw_read() calls as an out of framework
way of doing volatile register I/O when not using regmap. This has never
functioned correctly in mainline due to the regmap conversion, the
hw_read() implementation still does caching. In order to facilitate
removal of the subsystem level I/O code convert to use snd_soc_read(),
there should be no functional impact.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
2014-03-04 18:11:55 +08:00
Hui Wang 3b44675226 ALSA: hda - add automute fix for another dell AIO model
When plugging a headphone or headset, lots of noise is heard from
internal speaker, after changing the automute via amp instead of
pinctl, the noise disappears.

BugLink: https://bugs.launchpad.net/bugs/1268468
Cc: David Henningsson <david.henningsson@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-04 10:25:25 +01:00
Xiubo Li 931f27c6e8 ASoC: cache: Do the codec->reg_cache zero pionter check
For the snd_soc_cache_init(), the reg_size maybe zero and then the value
of codec->reg_cache, which is alloced via kzalloc, maybe equal to
ZERO_SIZE_PTR. If the reg parameter of snd_soc_cache_write() is large enough,
the cache[idx] = val maybe cause the kernel crash...

So this patch fix this via doing the zero pionter check of it.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04 12:32:19 +08:00
Aaro Koskinen ea2787f350 ASoC: n810: fix init with DT boot
Since 3.14-rc1 only DT boot has been supported on N810, so this
file fails to init. Make a minimal fix to retain functionality.
This file should be properly converted to DT in longer term.

There seems to be still other unresolved issues with N810 audio support,
but this patch is needed at minimum as otherwise the machine driver
probing would completely fail.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04 12:28:58 +08:00
Kuninori Morimoto c82e1c8874 ASoC: rsnd: share reg_field and reduce memory
Gen1/Gen2 code never be used in same time.
Thus, driver can share Gen1 only register and Gen2 only register.
It can reduce memory too.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04 12:13:49 +08:00
Kuninori Morimoto 8467dedc9d ASoC: rsnd: modify rsnd_adg_ssi_ws_timing_gen2() parameter
rsnd_adg_ssi_ws_timing_gen2() returns SSI WS timing,
and it used "mod" as parameter.
but, this "mod" is sometimes not ssi mod.
Get SSI mod from rsnd_dai_stream

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04 12:13:49 +08:00
Kuninori Morimoto 685fb3eb31 ASoC: rsnd: remove unused SSI_CONTROL
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04 12:13:49 +08:00
Kuninori Morimoto d1ac970f5d ASoC: rsnd: use function pointer for each probe
R-Car sound consists of many devices.
It will have more device support in the future.
Thus, for each probe become now function pointer array.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04 12:13:49 +08:00
Kuninori Morimoto 468be93eb4 ASoC: rsnd: use devm_clk_get() instead of clk_get()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04 12:13:49 +08:00
Kuninori Morimoto 374e542637 ASoC: rsnd: get ssi/scu from rsnd_dai_stream
Current driver is assuming that SSI id = SCU id.
But, now, it can get correct SSI/SCU from
rsnd_dai_stream. use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04 12:13:49 +08:00
Kuninori Morimoto a126021d14 ASoC: rsnd: use mod array instead of list on rdai
struct rsnd_dai_stream used list for mod list.
It added only odd flexibility to current driver, and
it is a factor which makes extendibility difficult.
rsnd use mod array instead of list from now.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04 12:13:49 +08:00
Kuninori Morimoto 9bfed6cf4f ASoC: rsnd: run rsnd_path_init() when probe() timing
Current rsnd SSIU/SSI/SCU/SRU path is set
when playback/capture starts up.
But it is meaningless method, since the path is based
on platform and can be set in probe() timing.
This patch sets the path on probe() timing.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04 12:13:48 +08:00
Lars-Peter Clausen 055bbe2df9 ASoC: wm{5102, 5110, 8997}: Replace codec->control_data with arizona->regmap
With the ongoing component-ization of the ASoC framework and the continuing
migration to using regmap for IO the control_data field of the snd_soc_codec
struct will eventually be removed. Prepare the wm5192, wm5110 and wm8997
drivers for this by using arizona->regmap instead of accessing the CODEC's
control_data field.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04 12:05:21 +08:00
Lars-Peter Clausen 48b5e1fb88 ASoC: wm8753: Remove superfluous 'codec->cache_sync = 1'
The wm8763 driver uses regmap for IO which means that codec->cache_sync is not
used. The line was added in commit d3398ff ('ASoC: Convert WM8753 to direct
regmap API usage'). Presumably this was meant to be regcache_mark_dirty(), but
since we already call regcache_mark_dirty() in the core when suspending the
CODEC it is safe to just remove the line.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04 12:04:30 +08:00
Nenghua Cao 6489573983 asoc: soc-core: fix coccinelle warnings
sound/soc/soc-core.c:2708:6-13: WARNING: Assignment of
bool to 0/1
sound/soc/soc-core.c:2726:3-10: WARNING: Assignment of
bool to 0/1

    More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Nenghua Cao <nhcao@marvell.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04 12:02:28 +08:00
Nenghua Cao 939d9f1699 ASoC: core: fix coccinelle warnings
sound/soc/soc-core.c:2708:6-13: WARNING: Assignment of
bool to 0/1
sound/soc/soc-core.c:2726:3-10: WARNING: Assignment of
bool to 0/1

    More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Nenghua Cao <nhcao@marvell.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04 11:59:20 +08:00
Kailang Yang 31278997ad ALSA: hda/realtek - Add headset quirk for Dell DT
This quirk is needed for the headset microphone to work.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-03 10:48:55 +01:00
Marius Knaust a6b92b6650 ALSA: hda - Added inverted digital-mic handling for Acer TravelMate 8371
Signed-off-by: Marius Knaust <marius.knaust@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-03 09:55:43 +01:00
Dylan Reid db291e36a4 ALSA: hda - Mark reg op args as iomem
The ops to read and write registers should take pointers labeled as
__iomem.  Thanks to the sparse bot for catching this.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-03 09:53:28 +01:00
Dylan Reid 778bde6f59 ALSA: hda - Rename reg access ops in hda_controller_ops
Using readl, writel, etc. resulted in some architectures, such as
s390, expanding the member names into zpci_writel.  Obviously not the
intended result.

Fixes s390 build breakage introduced by "4083081 - ALSA: hda - Allow
different ops to read/write registers"

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-03 09:53:21 +01:00
Dylan Reid 7c3e438add ALSA: hda - Make azx_attach_pcm_stream static
It is only used in hda_controller.c now.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-03 09:53:14 +01:00
Lars-Peter Clausen 112ad7f28e ASoC: wm1133-ev1: Convert to table based DAPM setup
Use table based setup to register the DAPM widgets and routes.  This on one hand
makes the code a bit shorter and cleaner and on the other hand the board level
DAPM elements get registered in the card's DAPM context rather than in the
CODEC's DAPM context.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 16:06:20 +08:00
Xiang Xiao 17282ba431 ASoC: dapm: Reorder the bias update sequence
The new sequence ensure that dapm_pre_sequence_async work on
the card before all codecs and dapm_post_sequence_async work
on the card after all codecs.
So the machine driver could utilize the determinate sequence
to do the gloabl setup and teardown in the right place.

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 12:47:40 +08:00
Xiang Xiao 57996358f4 ASoC: dapm: Power off all widgets in the snd_soc_dapm_shutdown
The widgets generated by the machine driver need to power off too.

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 12:40:54 +08:00
Denis Carikli 66f232908d ASoC: eukrea-tlv320: Add DT support.
Cc: Eric Bénard <eric@eukrea.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: alsa-devel@alsa-project.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 12:27:52 +08:00
Lars-Peter Clausen a9576cbbba ASoC: pxa: zylonite: Convert to table based DAPM setup
Use table based setup to register the DAPM widgets and routes. This on one hand
makes the code a bit cleaner and on the other hand the board level DAPM elements
get registered in the card's DAPM context rather than in the CODEC's DAPM
context.

Also drop the two snd_soc_dapm_enable_pin() since pins are enabled by default
and there is no matching snd_soc_dapm_disable_pin() in the driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 11:01:52 +09:00
Lars-Peter Clausen f6b2a04590 ASoC: pxa: mioa701_wm9713: Convert to table based DAPM setup
Use table based setup to register the DAPM widgets and routes. This on one hand
makes the code a bit cleaner and on the other hand the board level DAPM elements
get registered in the card's DAPM context rather than in the CODEC's DAPM
context.

Also remove the snd_soc_dapm_enable_pin() calls, since pins are enabled by
default and there are no matching snd_soc_dapm_disable_pin() calls.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 11:01:48 +09:00
Lars-Peter Clausen 1bdd301f79 ASoC: pxa: e800_wm9712: Convert to table based DAPM setup
Use table based setup to register the DAPM widgets and routes. This on one hand
makes the code a bit cleaner and on the other hand the board level DAPM elements
get registered in the card's DAPM context rather than in the CODEC's DAPM
context.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 11:01:48 +09:00
Lars-Peter Clausen 98308c825b ASoC: pxa: e750_wm9705: Convert to table based DAPM setup
Use table based setup to register the DAPM widgets and routes. This on one hand
makes the code a bit cleaner and on the other hand the board level DAPM elements
get registered in the card's DAPM context rather than in the CODEC's DAPM
context.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 11:01:48 +09:00
Lars-Peter Clausen 23d8f2253c ASoC: pxa: e740_wm9705: Convert to table based DAPM setup
Use table based setup to register the DAPM widgets and routes. This on one hand
makes the code a bit cleaner and on the other hand the board level DAPM elements
get registered in the card's DAPM context rather than in the CODEC's DAPM
context.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 11:01:48 +09:00
Lars-Peter Clausen e14de47ac9 ASoC: pxa: Pass correct DAPM context to {corgi,poodle,spitz}_ext_control
When calling {corgi,poodle,spitz}_ext_control() from the startup callback we
pass the CODEC's DAPM context instead of the card's DAPM context. This is not a
problem per se since all the DAPM functions in ext_control() fallback to widgets
from other DAPM contexts, but passing the card's context is more consistent.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 11:01:48 +09:00
Lars-Peter Clausen 4f07c9ccdf ASoC: neo1973_wm8753: Convert to table based setup
Use table based setup to register the controls and DAPM widgets and routes.
This on one hand makes the code a bit shorter and cleaner and on the other hand
the board level DAPM elements get registered in the card's DAPM context rather
than in the CODEC's DAPM context.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 10:35:04 +09:00
Lars-Peter Clausen 61e7fe2577 ASoC: neo1973_wm8753: Post gta01 support removal cleanup
With GTA01 support gone from the driver there is no need to keep a separate
initilization routine for the GTA02 specific bits.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 10:35:04 +09:00
Kuninori Morimoto ecba9e724c ASoC: rsnd: unify rdai naming
struct rsnd_dai is called as "rdai",
but its size has been called as "dai_nr".
Unify these as "rdai"

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 10:19:21 +09:00
Kuninori Morimoto 98455ed5dd ASoC: rsnd: remove verbose debug message from scu/ssi
scu/ssi probe() already have more detail debug message.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 10:19:21 +09:00
Kuninori Morimoto 5da39cf304 ASoC: rsnd: remove verbose function parameter
priv has rcar_snd_info pointer.
having priv and info in same time is verbose.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 10:19:21 +09:00
Kuninori Morimoto d870a91e9d ASoC: rsnd: move rsnd_mod_call() macro
core.c is the only user of rsnd_mod_call() macro.
Move it to core.c from rsnd.h

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 10:19:21 +09:00
Kuninori Morimoto 498480731e ASoC: rsnd: move priv member settings to upper side
There is no big meaning, but preparation for platform dai support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 10:19:21 +09:00
Dylan Reid 78e34f34ac ALSA: hda - remove PCI dependency in Kconfig
Remove the dependency on CONFIG_PCI for building hda codec drivers so
that platforms with HDA attach via means other than PCI can use them.
This was as suggested by tiwai.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:23:55 +01:00
Dylan Reid 154867cf4e ALSA: hda - Move codec create to hda_controller
Codec creation and stream initialization can be shared between
hda_intel and hda platform drivers.  Move it and the static functions
it depends on to hda_controller.c.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:23:33 +01:00
Dylan Reid f0b1df8871 ALSA: hda - Move azx_interrupt to hda_controller
This code will be reused by an hda_platform driver as it has no PCI
dependencies.  This allows update_rirb to be static as all users are
now in hda_controller.c.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:23:24 +01:00
Dylan Reid 7ca954a86b ALSA: hda - Add position_check op
This op will be used by hda_intel to do the position check.  Takashi
wisely suggested adding this before moving the interrupt handler to
common HDA code.  Having this callback prevents the need to move the
hda_intel specific delayed interrupt handling with the irq.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:23:16 +01:00
Dylan Reid f43923ff2c ALSA: hda - Move low level functions to hda_controller
Share more code from hda_intel.  This moves the link control and
initialization to hda_controller.  The code will also be used by an
hda platform driver.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:23:06 +01:00
Dylan Reid f19c3ec21b ALSA: hda - move alloc_cmd_io to hda_controller
Combining the call to alloc_cmd_io with the allocate pages function
removes an extra interface between hda_intel and hda_controller.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:22:58 +01:00
Dylan Reid 6e85dddc1c ALSA: hda - Relocate RIRB/CORB interface to hda_controller
This is done to allow an HDA platform driver to reuse the code.

A few of the interfaces added to hda_controller will disappear in
following commits as their users are also moved to hda_controller.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:22:46 +01:00
Dylan Reid 2b5fd6c2e9 ALSA: hda - Move the dsp loader to hda_controller
Moving the DSP loading functionality to hda_controller.c means that
the dsp lock doesn't need to be shared in hda_intel and
hda_controller.  The forthcoming platform driver doesn't need the DSP
loading code, but sharing it doesn't hurt.

Tested on Chromebook Pixel's ca0132 that uses the DSP loader.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:22:38 +01:00
Dylan Reid 6790899443 ALSA: hda - Pull pages allocation to hda_controller
Pull allocation from first_init to a new function in hda_controller.c.
Short term this will allow the dsp loader to be moved as well.  In
later commits it will allow the same allocation to be used by the
platform hda driver.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:22:30 +01:00
Dylan Reid 05e848788e ALSA: hda - Add hda_controller.c and move pcm ops from hda_intel
Pull the pcm_ops and the functions they use into a new hda_controller
file.  This is done to allow for other hda implementations besides PCI
to use the same ops.  The hda_controller file will house functionality
related to HDA but independent of the bus used to talk to the
controller.

This currently shares dsp locking across the two files.  This will be
remedied in a following commit.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:22:17 +01:00
Dylan Reid 8769b27861 ALSA: hda - Add pcm_mmap_prepare op.
Adding this op allows the X86 specific mmap operation to help in
hda_intel without needing a CONFIG_X86 in future non-PCI hda drivers.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:22:02 +01:00
Dylan Reid b419b35be4 ALSA: hda - Move snd page allocation to ops
Break out the allocation of pages for DMA and PCM buffers to ops in
the chip structure.  This is done to allow for architecture specific
work-arounds to be added.  Currently mark_pages_wc is used by
hda_intel.  This avoids needing to move that x86-specific code to a
common area shared with hda platform drivers.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:21:51 +01:00
Dylan Reid e62a42aebd ALSA: hda - Pass max_slots and power_save to codec_create
Passing the max slots and power save arguments to codec_create will
allow for its reuse by an hda_platform driver. It makes the function
independent of the module params in hda_intel and ready to move to
hda_shared in a following commit.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:21:43 +01:00
Dylan Reid 749ee287fc ALSA: hda - Add jackpoll_ms to struct azx
Keeping a pointer to the jackpoll_ms array in the chip will allow
azx_codec_create to be shared between hda_intel and hda_platform
drivers.  Also modify get_jackpoll_ms to make the jackpoll_ms member
optional, this way a platform driver can leave it out if it's not
needed.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:21:29 +01:00
Dylan Reid f563bf65d9 ALSA: hda - remove unused clear of STATESTS
Although the code was updated last year the "#if 0" surrounding it
dates back to the original git commit.  The function will be moved to
a new file, no need to carry the dead code.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:21:19 +01:00
Dylan Reid f46ea609d1 ALSA: hda - Add function pointer for disabling MSI
This is a PCI-only feature, but adding a callback for it in the chip
structure breaks the PCI dependency in the RIRB code allowing the
logic there to be re-used by the platform HDA driver.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:21:13 +01:00
Dylan Reid 8928756dbd ALSA: hda - Use device pointer from the card instead of pci
This removes calls to get the device via PCI from other parts of the
code that will be able to be re-used by the platform driver.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:21:04 +01:00
Dylan Reid 9cdc0115e4 ALSA: hda - Keep pointer to bdl_pos_fix in chip struct
This will allow for a platform hda driver to use it as well.  It
removes the dependency on the module param from hda_intel, which will
allow for azx_setup_periods to be shared.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:20:51 +01:00
Dylan Reid 4083081333 ALSA: hda - Allow different ops to read/write registers
The forthcoming platform hda driver needs to override the way
registers are read and written.  In preparation for that, introduce a
reg_ops struct that can be implemented differently by the new driver.
Change the existing macros to use the new structure, and move them to
hda_priv.h where they will be accessible to both PCI and platform
drivers.

Start with register access, but later commits will add more ops that
differ between PCI and platform.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:20:37 +01:00
Dylan Reid 2538a4f583 ALSA: hda - Move some definitions to new hda_priv.h
Later commits adding support for hda platform drivers will want to use
the same defines and structures. Put them in a place reachable by both
hda_intel and the new platform driver.

This is a mostly a direct copy with a few whitespace and comment
changes to make checkpatch happy.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:20:19 +01:00
Lars-Peter Clausen 234c0b8fb0 ASoC: dapm: Break dapm_set_path_status() appart
There are three different completely independent code paths in
dapm_set_path_status(). One of them is never used at all and the other two (one
for mixers, one for MUXs) have their distincive callsites that always go onto
the same path. Breaking the function into two parts allows us to reduce the code
size and in the MUX case also do some optimizations to avoid having to calcualte
the selected item for each item again.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-01 12:03:36 +09:00
Lars-Peter Clausen 236aaa6863 ASoC: dapm: Consolidate MUXs and virtual MUXs
MUXs and virtual MUXs are almost identical, the only difference is that for
virtual MUX there is no hardware backing register in which setting is stored.
This patch adds code, which is similar to what we already do for DAPM mixer
controls to support virtual mixer controls, to DAPM enum controls. The new code
will check if the enum does a hardware backing register and skip over reading
and writing to the register if it has not.  This allows us to use the same code
path for both MUXs and virtual MUXs and a lot of nearly identical code can be
removed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-01 12:03:36 +09:00
Lars-Peter Clausen f6b45c28f4 ASoC: wm8995: Use SOC_ENUM_SINGLE_VIRT_DECL()
For the upcoming consolidation for MUXs and virtual MUXs we need to mark virtual
enums as such.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-01 12:03:36 +09:00
Lars-Peter Clausen 86d4c9ab28 ASoC: wm8994: Use SOC_ENUM_SINGLE_VIRT_DECL()
For the upcoming consolidation for MUXs and virtual MUXs we need to mark virtual
enums as such.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-01 12:03:35 +09:00
Lars-Peter Clausen 15ab40a9a8 ASoC: mc13783: Use SOC_ENUM_SINGLE_VIRT_DECL()
For the upcoming consolidation for MUXs and virtual MUXs we need to mark virtual
enums as such.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Philippe Rétornaz <philippe.retornaz@epfl.ch>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-01 12:03:35 +09:00
Lars-Peter Clausen ba51311640 ASoC: max98090: Use SOC_ENUM_SINGLE_VIRT_DECL()
For the upcoming consolidation for MUXs and virtual MUXs we need to mark virtual
enums as such.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-01 12:03:35 +09:00
Lars-Peter Clausen 2896317842 ASoC: adau1373: Use SOC_ENUM_SINGLE_VIRT_DECL()
For the upcoming consolidation for MUXs and virtual MUXs we need to mark virtual
enums as such.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-01 12:03:34 +09:00
Lars-Peter Clausen 3727b49684 ASoC: dapm: Consolidate MUXs and value MUXs
MUXs and value MUXs are almost identical, the only difference is that a value
MUX uses a look-up table to map from the selected control item to a register
value, while MUXs use a direct mapping. This patch uses
snd_soc_enum_item_to_val() and snd_soc_enum_val_to_item(), which where earlier
introduced during the consolidation of enum and value enum controls, to hide
this difference. This allows us to use the same code path for both MUXs and
value MUXs and a lot of nearly duplicated code can be removed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-01 12:03:34 +09:00
Lars-Peter Clausen 29ae2fa553 ASoC: Consolidate enum and value enum controls
The implementations for enum and value enum controls are almost identical. The
only difference is that the value enum uses an additional look-up table to map
the control value to the register value, while the enum control uses a direct
mapping. Enums and value enums can easily be distinguished at runtime, for value
enums the values field of the snd_soc_enum struct contains the look-up table,
while for enums it is NULL. This patch adds two new small helper functions
called snd_soc_enum_item_to_val() and snd_soc_enum_val_to_item() which map
between register value and control item. If the items field of the snd_soc_enum
struct is NULL the function will do a direct mapping otherwise they'll use the
look-up table to do the mapping. Using these small helper functions it is
possible to use the same kcontrol handlers for both enums and value enums. The
functions are added a inline functions in soc.h so they can also be used by the
DAPM code to accomplish similar consolidation.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-01 12:03:33 +09:00
Mark Brown a304681f36 Merge branches 'topic/dapm', 'topic/sign', 'topic/adau1373', 'topic/max98090', 'topic/mc13783', 'fix/wm8994' and 'topic/wm8995' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-enum 2014-03-01 12:03:16 +09:00
David Henningsson ca460f8652 ALSA: hda - Fix CORB reset to follow specification
According to the HDA spec, we must write 1 to bit 15 on a CORBRP
reset, read back 1, then write 0, then read back 0. This must be
done while the DMA is not running.

We accidentaly ended up writing back the 0 by using a writel
instead of a writew to CORBWP.

This caused occasional controller failure on Bay Trail hardware.

[replaced error messages with dev_err() by tiwai]

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-28 14:03:30 +01:00
Takashi Iwai d604b39908 ALSA: hda - Fix registration of beep input device
The beep input device is registered via input_register_device(), but
this is called in snd_hda_attach_beep_device() where the sound devices
aren't registered yet.  This leads to the binding to non-existing
object, thus results in failure.  And, even if the binding worked
(against the PCI object), it's still racy; the input device appears
before the sound objects.

For fixing this, register the input device properly at dev_register
ops of the codec object it's bound with.  Also, call
snd_hda_detach_beep_device() at dev_disconnection so that it's
detached at the right timing.  As a bonus, since it's called in the
codec's ops, we can get rid of the further call from the other codec
drivers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-28 14:02:21 +01:00
Takashi Iwai 2b9e4a73fb Merge branch 'topic/cvt-dev-prints' into for-next
This merges the bunch of changes over pci and usb sound drivers to
convert to dev_err() and co.
2014-02-28 11:54:43 +01:00
Kuninori Morimoto f687d900d3 ASoC: simple-card: cpu_dai_name creates confusion when DT case
Basically, soc_bind_dai_link() checks
cpu_dai->dev->of_node and dai_link->cpu_of_node in DT case.
But after that it will check
cpu_dai->name and dai_link->cpu_dai_name too.

On the other hand, snd_soc_dai :: name is created by
fmt_single_name() or fmt_multiple_name().

There is no confusion if dai name is created by fmt_multiple_name(),
since cpu_dai->name is same as dai_link->cpu_dai_name.
but, if dai name is created by fmt_single_name(), CPU DAI never match.

Thus, simple-card not set dai_link->cpu_dai_name if DT case
to skip naming match on soc_bind_dai_link()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-28 14:25:25 +09:00
Xiubo Li 30519cb8d2 ASoC: sgtl5000: Simplify ASoC probe code
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-28 12:53:04 +09:00
Xiubo Li fe2265e483 ASoC: core: Set the default I/O up try regmap.
For most CODEC drivers which the REGMAP is used, the soc_probe_codec()
will do the stuff work of snd_soc_codec_set_cache_io(), which the CODEC
drivers' ASoC probe will do too, and almost at the same time.

This patch set the default I/O up try regmap, and then the CODEC drivers'
stuff work of snd_soc_codec_set_cache_io() will be redundant, while if one
CODEC driver needed to set it's own I/O, then it can rewrite the default ones.
Then could we just discard the snd_soc_codec_set_cache_io() from the CODEC
drivers' ASoC probe to simplify the code.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-28 12:52:14 +09:00
Xiubo Li 9aa8210d40 ASoC: io: Clean up snd_soc_codec_set_cache_io()
Now that all users have been converted to regmap and the config.reg_bits
and config.val_bits can be setted by each user through regmap core API.
So these two params are redundant here.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-28 12:46:51 +09:00
H. Peter Anvin c5f9ee3d66 x86, platforms: Remove SGI Visual Workstation
The SGI Visual Workstation seems to be dead; remove support so we
don't have to continue maintaining it.

Cc: Andrey Panin <pazke@donpac.ru>
Cc: Michael Reed <mdr@sgi.com>
Link: http://lkml.kernel.org/r/530CFD6C.7040705@zytor.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-27 08:07:39 -08:00
Takashi Iwai e8b99a1dcb ALSA: hda/sigmatel - Allow auto-switching for dock line-in of HP laptops
Many HP laptops with STAC codecs have a docking station port and BIOS
sets the pins for the input on the dock as a line in.  Because the
generic parser doesn't handle a line in pin as auto-switchable, this
resulted in the manual capture source selection on these laptops.

However, from the usability POV, the automatic switching is easier.
This patch adds the line_in_auto_switch hint in the fixup function for
these laptops.  Even if no dock port is present, this should be
harmless as the generic parser allows the auto-switching only in a
limited situation (all three pins are located in different
positions).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-27 16:24:53 +01:00
Takashi Iwai 6776a5d712 ALSA: Move EXPORT_SYMBOL() in appropriate places
Just a cleanup to follow the standard coding style.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-27 16:00:51 +01:00
Takashi Iwai 997e7547ab ASoC: Updates for v3.14
A few more driver specific bug fixes, all driver specific things that
 only affect users of those devices.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTDyNMAAoJELSic+t+oim9ar0P/2J7YHzqD/gs9SR4ufqr2JK9
 yudP5Stt81np6IZwJHJTF3n33RMXTanAdaFr5usJn0Mn8THuMzL6vCOr9zhoEOxu
 j3HDvR6rLnVQ9N0Cw9L7uM+goQzbw3N/rAfyUd6UckT1raKCErtLRZvvb7BV9FLX
 gu3K3b4w7LtTYqoFPPGpxjTENwNkX5rNWD5egDVnaiL9maAoCUal9HtznDSLu0pa
 uo8ggJRXEQYXAQ1rpEvSKwwYrZ2fQ3IxTMi3ucm9KxGvO3xyK/aXt32yp0qH5Poz
 v3FWDbXU8DsVYFXlRNrAIiAuMERBCsZQHismp3mt/yn+IOvcJHNVeRSJbIROddRr
 TCU7vo/OoBzsN5BJ4McoHtmfJXKaN+xY5yJJ7xczBcYPcfQlIXiXZbSJC8WNFVet
 MlNcvqpVzo9BIXwrGDbPofUBiruyOcbXg79QW1xWfR122BNoF2Ut+dKfXsoXfW5Y
 oETCw5oMO4dOifLvWp+0q0GXOG0EK1fqiHoHxhU/fksr/WQeJS7bplixXpPZoiqV
 PC6RKnFEeMHMdFmPyo7kQ94KVn4uQ/SomL+MQUIi+7+e2iC0vqql2A5kmE9iO+dS
 V7KuVgwcQ3QkIHEVeHKwKH3ETsKB7yktqlnqysPgwAf8fNKeokNk7eALsxkeSkt3
 b00TyEOk9oRYPlhmpcTd
 =GL3V
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v3.14

A few more driver specific bug fixes, all driver specific things that
only affect users of those devices.
2014-02-27 12:46:25 +01:00
Mark Brown 23308e8820 Merge remote-tracking branch 'asoc/fix/wm8958' into asoc-linus 2014-02-27 20:26:10 +09:00
Mark Brown 2f23db13df Merge remote-tracking branches 'asoc/fix/da732x' and 'asoc/fix/sta32x' into asoc-linus 2014-02-27 20:26:08 +09:00
Takashi Iwai f2606a8079 ALSA: hda - Make codec object as a parent for input beep devices
Instead of the controller, the new codec object is assigned as a
parent for the hd-audio beep input devices, just like already done for
PCM and hwdep.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-27 09:33:00 +01:00
Takashi Iwai b3619b288b ASoC: sta32x: Fix wrong enum for limiter2 release rate
There is a typo in the Limiter2 Release Rate control, a wrong enum for
Limiter1 is assigned.  It must point to Limiter2.
Spotted by a compile warning:

In file included from sound/soc/codecs/sta32x.c:34:0:
sound/soc/codecs/sta32x.c:223:29: warning: ‘sta32x_limiter2_release_rate_enum’ defined but not used [-Wunused-variable]
 static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum,
                             ^
include/sound/soc.h:275:18: note: in definition of macro ‘SOC_ENUM_DOUBLE_DECL’
  struct soc_enum name = SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, \
                  ^
sound/soc/codecs/sta32x.c:223:8: note: in expansion of macro ‘SOC_ENUM_SINGLE_DECL’
 static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum,
        ^

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: <stable@vger.kernel.org>
2014-02-27 16:53:50 +09:00
Takashi Iwai e2755cf9a4 ASoC: Fixes for v3.14
A somewhat large set of fixes here due to the identification of some
 systematic problems with hard to use APIs in the subsystem.  Takashi did
 a lot of work to address the enumeration API which uncovered a number of
 off by one bugs caused by confusing APIs while Charles addressed issues
 in the locking around DAPM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTCXkuAAoJELSic+t+oim99LEP/3o0MTeminJkA0ks+edRN32I
 zlbPd1iv38Rh20J85zJ8lHhZlkDVPpwYVEDziCClfG3QbWiwh18HEreOhi5xswxi
 qSIk+4chXvBpdWaopLq+MEZSEqFLaHDeWPifzNs8tjQ2F8+RPZ5aOtmeBrwFQZVR
 fJmuJ8KnOvjcH8WGNKIepZENqNIU7NuwMmzB7mHwyANKuan30u9Vx5r7OZBEkA1h
 n6vNa48i2HKrdFwajm7Y/o8s5Qrnseiz6NepaO4hTHQhlFhsU9mjCeYvmzhvc1Jv
 NAC3x2yUIrff95IwzMQi/jwJHJN+VXIqvsp1MWNm4rOucZ5kxw+dtFmmXtvsedI1
 HO1gWPqvsYENs5L4cGbi1An/T7vSWOjsbs/2QwRRqduRHVJxnnoADswoQG2AGhOy
 z1uJsebt72eAsoCxrPmaysa4irNwkDLwpFEjTpEGpgWo3j5d+UfEUScc/1B3ia7g
 a/Oq9q/Q71ogdKSrMpYc66eK7y1XGF2XZNl4x3g/ZwswibM4aIwBr6ZekpoPPOYq
 KT3zEecKJ+lbPxl2rUQgm9ivAuC1XKJoBRLRgHXGtzZI54SFUkFD/dVL6GFfR6bS
 V8RHeGqOmoD/w6WpfXC4w9yhfNhJPbOKOaSFUdCyU5D2bgb7AOcwZOXRavXtJwJP
 //gsmzui+ikt4scli8a/
 =Ty2j
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.14

A somewhat large set of fixes here due to the identification of some
systematic problems with hard to use APIs in the subsystem.  Takashi did
a lot of work to address the enumeration API which uncovered a number of
off by one bugs caused by confusing APIs while Charles addressed issues
in the locking around DAPM.
2014-02-27 07:16:15 +01:00
Xiubo Li a3f7dcc9cc ASoC: fsl-sai: Add SND_SOC_DAIFMT_DSP_A/B support.
o Add SND_SOC_DAIFMT_DSP_A support.
o Add SND_SOC_DAIFMT_DSP_B support.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-27 13:36:01 +09:00
Takashi Iwai e3b3757b92 ALSA: 6fire: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 17:22:09 +01:00
Takashi Iwai 0ba41d917e ALSA: usb-audio: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
As there are too deep indirections (e.g. ep->chip->dev->dev),
a few new local macros, usb_audio_err() & co, are introduced.

Also, the device numbers in some messages are dropped, as they are
shown in the prefix automatically.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:34 +01:00
Takashi Iwai 6436bcf6a4 ALSA: ymfpci: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:33 +01:00
Takashi Iwai 4c826c492f ALSA: vx222: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:33 +01:00
Takashi Iwai 80c19b7513 ALSA: trident: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:32 +01:00
Takashi Iwai 09ae539e4d ALSA: rme9652: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:32 +01:00
Takashi Iwai e3a471d668 ALSA: hdspm: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:31 +01:00
Takashi Iwai a54ba0fe9f ALSA: hdsp: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:31 +01:00
Takashi Iwai b59bb8efd1 ALSA: pcxhr: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:30 +01:00
Takashi Iwai 03d3ac2178 ALSA: oxygen: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:30 +01:00
Takashi Iwai a3fe03f412 ALSA: nm256: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:29 +01:00
Takashi Iwai 6414e35deb ALSA: mixart: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:29 +01:00
Takashi Iwai be4e6d3c0f ALSA: lx6464es: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:28 +01:00
Takashi Iwai f58e2fcedb ALSA: lola: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:28 +01:00
Takashi Iwai 6dfb5aff7d ALSA: ice17xx: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:27 +01:00
Takashi Iwai 6f002b0216 ALSA: emu10k1: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:27 +01:00
Takashi Iwai 26bc6964f9 ALSA: emu10k1x: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:26 +01:00
Takashi Iwai ece7a36d40 ALSA: echoaudio: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:26 +01:00
Takashi Iwai 2b96a7f1fe ALSA: cs46xx: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:25 +01:00
Takashi Iwai 00980aa9c7 ALSA: cs5535audio: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:25 +01:00
Takashi Iwai 74103227a6 ALSA: ca0106: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
A couple of prints are difficult to convert with dev_err() so they are
converted to pr_err() at least.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:24 +01:00
Takashi Iwai 179bb7f16a ALSA: aw2: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
A couple of prints are difficult to convert with dev_err() so they are
converted to pr_err() at least.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:24 +01:00
Takashi Iwai 5f1e693731 ALSA: ali5451: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Some debug prints are replaced with dev_dbg(), too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:23 +01:00
Takashi Iwai 38c16e34fe ALSA: ac97: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:23 +01:00
Takashi Iwai 473439e06a ALSA: via82xx_modem: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:22 +01:00
Takashi Iwai 59d3acfa2d ALSA: via82xx: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:21 +01:00
Takashi Iwai ffa74cc781 ALSA: sonicvibes: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
The debug prints are also reformatted to suit with dev_dbg().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:21 +01:00
Takashi Iwai 342cd93439 ALSA: rme96: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:20 +01:00
Takashi Iwai 03952a3e2d ALSA: rme32: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:20 +01:00
Takashi Iwai 747ce5b36c ALSA: maestro3: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:19 +01:00
Takashi Iwai 813bdba375 ALSA: intel8x0m: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:19 +01:00
Takashi Iwai f493e7bcaa ALSA: intel8x0: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:18 +01:00
Takashi Iwai 9c7f9abf62 ALSA: fm801: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:18 +01:00
Takashi Iwai 86cd372fe5 ALSA: es1968: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:17 +01:00
Takashi Iwai ebebecaa0a ALSA: es1938: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Some debug prints are replaced with dev_dbg(), too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:17 +01:00
Takashi Iwai 7ddbd1819c ALSA: ens137x: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:16 +01:00
Takashi Iwai 132b3873d2 ALSA: cs5530: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:16 +01:00
Takashi Iwai b055e7b483 ALSA: cs4281: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:15 +01:00
Takashi Iwai 40175bdba1 ALSA: cmipci: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Some commented debug prints are also enabled as dev_dbg().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:15 +01:00
Takashi Iwai 02c33520b3 ALSA: bt87x: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:14 +01:00
Takashi Iwai 4a8d9d717f ALSA: azt3328: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
All debug print macros have been replaced with dev_dbg(), too.
Also, added the missing definition of snd_azf3328_ctrl_inw().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:14 +01:00
Takashi Iwai 4162cd3843 ALSA: azt3328: Remove function debug prints
We have a better infrastructure in general, so let's reduce the
home-baked debug macros.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:13 +01:00
Takashi Iwai ca6aafd82f ALSA: atiixp-modem: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:13 +01:00
Takashi Iwai 25135fdcd2 ALSA: atiixp: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:12 +01:00
Takashi Iwai d85d878efb ALSA: als4000: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:12 +01:00
Takashi Iwai c778f7ec74 ALSA: als300: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Also, correct the printk level appropriately.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:11 +01:00
Takashi Iwai bc340c3350 ALSA: als300: Remove function debug prints
We have a better infrastructure in general, so let's reduce the
home-baked debug macros.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:11 +01:00
Takashi Iwai 296330046d ALSA: ad1889: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:10 +01:00
Takashi Iwai a932be91f2 ALSA: rme96: Convert to the new pm_ops
This driver slipped from the last rewrite.  Just convert to the new
standard pm ops.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:10 +01:00
Jarkko Nikula a6cf8f7b53 ASoC: Intel: Baytrail: Fix implicit declaration of function 'memcpy_fromio'
Some kernel configurations can cause following build error:

sound/soc/intel/sst-baytrail-ipc.c: In function ‘sst_byt_get_dsp_position’:
sound/soc/intel/sst-baytrail-ipc.c:744:2: error: implicit declaration of function ‘memcpy_fromio’ [-Werror=implicit-function-declaration]
  memcpy_fromio(&fw_tstamp,
  ^
cc1: some warnings being treated as errors

Fix this by including <linux/io.h> explicitly.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-26 23:47:13 +09:00
Mark Brown 7530682024 ASoC: da732x: Mark DC offset control registers volatile
The driver reads from the DC offset control registers during callibration
but since the registers are marked as volatile and there is a register
cache the values will not be read from the hardware after the first reading
rendering the callibration ineffective.

It appears that the driver was originally written for the ASoC level
register I/O code but converted to regmap prior to merge and this issue
was missed during the conversion as the framework level volatile register
functionality was not being used.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Cc: stable@vger.kernel.org
2014-02-26 20:30:36 +09:00
Kailang Yang fce0a0c726 ALSA: hda/realtek - Add more entry for enable HP mute led
I lost this SSID. Add it into the fixup table.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 10:05:56 +01:00
Alexander Shiyan 17cb37aafd ASoC: cirrus: Remove excess dependencies on SND_SOC
Configuration for Cirrus Logic audio support is included only
if SND_SOC symbol selected, so no reason to check it once more.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-26 08:56:57 +09:00
Xiubo Li 13cde09003 ASoC: fsl-sai: fix Freescale SAI DAI format setting.
o Fix some bugs of fsl_sai_set_dai_fmt_tr().
o Add SND_SOC_DAIFMT_LEFT_J support.
o Add SND_SOC_DAIFMT_CBS_CFM support.
o Add SND_SOC_DAIFMT_CBM_CFS support.
o And SND_SOC_DAIFMT_RIGHT_J need to be done in the future.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-26 08:51:24 +09:00
Jarkko Nikula 95c40d4b0e ASoC: Intel: byt-rt5640: Use init time DAI format
Setting static DAI format has been supported in the soc-core quite some time
now so there is no need to set it runtime in machine driver.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwoood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-26 08:49:08 +09:00
Jarkko Nikula 52be4776ca ASoC: Intel: byt-rt5640: Update internal mic and speaker kcontrol names
Use more sensible kcontrol names than "Int Mic" and "Ext Spk". Speakers
especially are usually integrated devices in sales models.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwoood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-26 08:49:04 +09:00
Dan Carpenter 31d632f955 ASoC: intel: incorrect sizeof()
This should be sizeof(pos) instead of sizeof(&pos).  Most likely they
are both 8 bytes though so it doesn't often make a difference in real
life.

Fixes: 2298124358 ('ASoC: Intel: Add Haswell/Broadwell IPC')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-26 08:45:57 +09:00
Dan Carpenter f9da9e434d ASoC: intel: restore IRQs on error
This should be spin_unlock_irqrestore() instead of spin_unlock()

Fixes: 2298124358 ('ASoC: Intel: Add Haswell/Broadwell IPC')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-26 08:45:43 +09:00
Dan Carpenter 951e9bb1fa ASoC: Intel: sst-firmware: missing curly braces (harmless)
There were some curly braces intended here, but the code actually
works the same either way so it's not a bug.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-26 08:45:39 +09:00
Jarkko Nikula 5069e5c93c ASoC: Intel: sst-acpi: Fix Oops in case of missing firmware
I swear I tested missing firmware in commit e5161d7987 ("ASoC: Intel:
sst-acpi: Request firmware before SST platform driver probing").

Unfortunately same wasn't done in commit 6dda27cbbd ("ASoC: Intel:
sst-acpi: Add support for multiple machine drivers per platform") which
will cause NULL pointer dereference in sst_acpi_fw_cb() when printing the
error since sst_acpi->mach is not set.

Fix this obvious error by setting the sst_acpi->mach in sst_acpi_probe().

Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-26 08:45:35 +09:00
Takashi Iwai 4e76a8833f ALSA: hda - Replace with standard printk
Use dev_err() and co for messages from HD-audio controller and codec
drivers.  The codec drivers are mostly bound with codec objects, so
some helper macros, codec_err(), codec_info(), etc, are provided.
They merely wrap the corresponding dev_xxx().

There are a few places still calling snd_printk() and its variants
as they are called without the codec or device context.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:27:32 +01:00
Takashi Iwai b989d0444b ALSA: hda - Enable sysfs attributes without CONFIG_SND_HDA_RECONFIG
Some sysfs attributes like init_pin_configs or vendor_name are really
basic and should be available no matter whether the codec driver is
re-configurable or not.  Put them out of #ifdef
CONFIG_SND_HDA_RECONFIG and allow the read-only accesses.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:55 +01:00
Takashi Iwai 648a8d276e ALSA: hda - Add sysfs to codec object, too
We have currently sysfs attributes for each hwdep, but basically these
should belong to the codec itself, per se.  Let's add them to the
codec object while keeping them for hwdep as is for compatibility.

While we are at it, split the sysfs-related stuff into a separate
source file, hda_sysfs.c, and keep only the stuff necessary for hwdep
in hda_hwdep.c.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:54 +01:00
Takashi Iwai 13aeaf6801 ALSA: hda - Create own device struct for each codec
As the HD-audio is treated individually in each codec driver, it's
more convenient to assign an own struct device to each codec object.
Then we'll be able to use dev_err() more easily for each codec, for
example.

For achieving it, this patch just creates an object "hdaudioCxDy".
It belongs to sound class instead of creating a new bus, just for
simplicity, at this stage.  No pm ops is implemented in the device
struct level but currently it's merely a container.  The PCM and hwdep
devices are now children of this codec device.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:54 +01:00
Takashi Iwai 2565c89908 ALSA: hda - Manage each codec instance individually
Now each snd_hda_codec instance is managed via the device chain, the
registration and release are done by its callback instead of calling
from bus.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:53 +01:00
Takashi Iwai 72620d6048 ALSA: Clean up snd_device_*() codes
A few code cleanups and optimizations.  In addition, drop
snd_device_disconnect() that isn't used at all, and drop the return
values from snd_device_free*().

Another slight difference by this change is that now the device state
will become always SNDRV_DEV_REGISTERED no matter whether dev_register
ops is present or not.  It's for better consistency.  There should be
no impact for the current tree, as the state isn't checked.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:52 +01:00
Takashi Iwai 289ca025ee ALSA: Use priority list for managing device list
Basically, the device type specifies the priority of the device to be
registered / freed, too.  However, the priority value isn't well
utilized but only it's checked as a group.  This results in
inconsistent register and free order (where each of them should be in
reversed direction).

This patch simplifies the device list management code by simply
inserting a list entry at creation time in an incremental order for
the priority value.  Since we can just follow the link for register,
disconnect and free calls, we don't have to specify the group; so the
whole enum definitions are also simplified as well.

The visible change to outside is that the priorities of some object
types are revisited.  For example, now the SNDRV_DEV_LOWLEVEL object
is registered before others (control, PCM, etc) and, in return,
released after others.  Similarly, SNDRV_DEV_CODEC is in a lower
priority than SNDRV_DEV_BUS for ensuring the dependency.

Also, the unused SNDRV_DEV_TOPLEVEL, SNDRV_DEV_LOWLEVEL_PRE and
SNDRV_DEV_LOWLEVEL_NORMAL are removed as a cleanup.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:51 +01:00
Takashi Iwai 71e2e1c147 ALSA: hwdep: Allow to assign the given parent
Just like PCM, allow hwdep to be assigned to a different parent device
than the card.  It'll be used for the HD-audio codec device in the
later patches.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:50 +01:00
Takashi Iwai f806bdb2f7 ALSA: hwdep: Take private_data as drvdata for sysfs
For referring to a different object from sysfs ops, take hwdep
private_data as stored via dev_set_drvdata() at creating the device
object.  In that way, the same sysfs ops can be used by different
device types.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:50 +01:00
Takashi Iwai caa751bad4 ALSA: Create sysfs attribute files via groups
Instead of calling each time device_create_file(), create the groups
of sysfs attribute files at once in a normal way.  Add a new helper
function, snd_get_device(), to return the associated device object,
so that we can handle the sysfs addition locally.

Since the sysfs file addition is done differently now,
snd_add_device_sysfs_file() helper function is removed.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:49 +01:00
Takashi Iwai d01a838c86 Merge branch 'for-linus' into HEAD 2014-02-25 12:12:17 +01:00
Takashi Iwai bf68665d7a ALSA: hda - Avoid codec D3 for keeping mute LED up on Lenovo Yxx0
The GPIO line used for the mute LED control on Lenovo Yxx0 laptops is
cleared unexpectedly when the codec goes to D3, typically by
power-saving.  For avoiding it, add a power filter in the fixup.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16373
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 08:39:54 +01:00
Takashi Iwai 37c367ecdb ALSA: hda - Add a fixup for HP Folio 13 mute LED
HP Folio 13 may have a broken BIOS that doesn't set up the mute LED
GPIO properly, and the driver guesses it wrongly, too.  Add a new
fixup entry for setting the GPIO pin statically for this laptop.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70991
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 07:27:36 +01:00
Jarkko Nikula 20df8d03a7 ASoC: Intel: Add build support for Baytrail SST
Enable build support for Baytrail SST DSP platform and byt-rt5640 machine
drivers.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-25 13:44:44 +09:00
Jarkko Nikula e029861214 ASoC: Intel: Add Baytrail SST and byt-rt5640 machine driver probing
Add Baytrail SST descriptor with the byt-rt5640 machine driver to sst-acpi
loader.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-25 13:44:41 +09:00
Jarkko Nikula 6439c8ad1e ASoC: Intel: Add machine driver for Baytrail SST with RT5640 codec
Add machine driver for Baytrail SST DSP platform with RT5640 audio codec.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-25 13:44:39 +09:00
Jarkko Nikula aef1311a7d ASoC: Intel: Add Intel Baytrail SST PCM platform driver
This adds the Baytrail SST DSP PCM platform driver. It registers itself with
the ALSA SoC layer and uses Intel Baytrail SST DSP IPC for DSP control.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-25 13:44:36 +09:00
Jarkko Nikula f7d01fd675 ASoC: Intel: Add Intel Baytrail SST DSP IPC support
Add support for Baytrail SST DSP IPC. This provides mechanism to communicate
with the DSP firmware.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-25 13:44:34 +09:00
Jarkko Nikula f746966377 ASoC: Intel: Add Intel Baytrail SST DSP support
This adds basic functionality for Baytrail SST DSP initialization and
firmware loading.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-25 13:44:31 +09:00
Jarkko Nikula 6ef20de726 ASoC: Intel: Add Baytrail SST ID and Baytrail specific register bits
While the SHIM register addresses in Baytrail are the same than Haswell and
Broadwell their register size is 64-bit and some bits are different.

This patch adds the SST device ID for Baytrail and Baytrail specific
SHIM bit definitions.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-25 13:44:27 +09:00
Lars-Peter Clausen 548da08fc1 ASoC: wm8958-dsp: Fix firmware block loading
The codec->control_data contains a pointer to the device's regmap struct. But
wm8994_bulk_write() expects a pointer to the parent wm8998 device.

The issue was introduced in commit d9a7666f ("ASoC: Remove ASoC-specific
WM8994 I/O code").

Fixes: d9a7666f ("ASoC: Remove ASoC-specific WM8994 I/O code")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
2014-02-25 13:39:36 +09:00
Lars-Peter Clausen d7f31d3c89 ASoC: wm8962: Replace codec->control_data with wm8962->regmap
With the ongoing component-ization of the ASoC framework and the continuing
migration to using regmap for IO the control_data field of the snd_soc_codec
struct will eventually be removed. Prepare the wm8962 driver for this by using
wm8962->regmap instead of accessing the CODEC's control_data field.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-25 13:35:48 +09:00
Lars-Peter Clausen b7c1b73097 ASoC: wm8996: Replace codec->control_data with wm8996->regmap
With the ongoing component-ization of the ASoC framework and the continuing
migration to using regmap for IO the control_data field of the snd_soc_codec
struct will eventually be removed. Prepare the wm8996 driver for this by using
wm8996->regmap instead of accessing the CODEC's control_data field.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-25 13:35:19 +09:00
Christian Engelmayer 180c275eb8 ASoC: wm8993: Remove unused pointer in wm8993_remove()
Commit 88b5bdfd (ASoC: wm8993: drop regulator_bulk_free of devm_ allocated
data) eliminated the last user of driver data pointer 'wm8993' in function
wm8993_remove() - Thus remove it. Detected by Coverity: CID 1186208.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-25 13:34:41 +09:00
Lars-Peter Clausen 30812cca63 ASoC: da732x: Use da732x->regmap instead of codec->control_data
With the ongoing component-ization of the ASoC framework and the continuing
migration to using regmap for IO the control_data field of the snd_soc_codec
struct will eventually be removed. Prepare the da732x driver for this by using
da732x->regmap instead of accessing the CODEC's control_data field.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-25 13:34:08 +09:00
Andrew Lunn ff1f0018cf drivers: Enable building of Kirkwood drivers for mach-mvebu
With the move of kirkwood into mach-mvebu, drivers Kconfig need
tweeking to allow the kirkwood specific drivers to be built.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-24 17:28:31 +00:00
Fabio Estevam ea9f8535a4 ASoC: fsl: imx-pcm-fiq: Remove unneeded 'out' label
Instead of jumping to the 'out' label, just return the error code immediately.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-24 14:41:15 +09:00
Mark Brown eeecf1a3f9 ASoC: da732x: Remove leftover cache size setting
The da732x driver no longer uses the ASoC level register cache but the
cache size setting had been left in the driver by mistake. Remove it.

Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-24 11:39:00 +09:00
xiangxiao f1adf5be51 ASoC: delay the initial jack detect by debounce_time
so the hardware could get time to initialize and debounce

Signed-off-by: xiangxiao <xiaoxiang@xiaomi.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-24 10:27:47 +09:00
xiangxiao cb29d7b9ef ASoC: add data field into snd_soc_jack_gpio
so callback could get the context data as needed

Signed-off-by: xiangxiao <xiaoxiang@xiaomi.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-24 10:27:44 +09:00
Xiubo Li 6ff62eedce ASoC: simple-card: add slot information parsing supports
For some CPU/CODEC DAI devices the slot information maybe needed. This
patch adds the slot information parsing for simple-card driver.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 14:26:37 +09:00
Mark Brown ff2878644e Merge branch 'topic/of' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-simple 2014-02-23 14:26:21 +09:00
Xiubo Li 89c6785715 ASoC: core: add TDM slot parsing from DT supports
For some CPU/CODEC DAI devices the TDM slot infomation maybe needed. This
patch adds the slot parsing from DT supports.

TDM slot properties:
    dai-tdm-slot-num : Number of slots in use.
    dai-tdm-slot-width :  Width in bits for each slot.

For instance:
    dai-tdm-slot-num = <2>;
    dai-tdm-slot-width = <8>;

And for each spcified driver, there could be one .of_xlate_tdm_slot_mask()
to specify a explicit mapping of the channels and the slots. If it's absent
the default snd_soc_of_xlate_tdm_slot_mask() will be used to generating the
tx and rx masks.

For snd_soc_of_xlate_tdm_slot_mask(), the tx and rx masks will use a 1 bit
for an active slot as default, and the default active bits are at the LSB of
the masks.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 14:15:30 +09:00
Mark Brown 56b2f34913 ASoC: io: Remove SND_SOC_I2C
Now that all users have been converted to regmap we can eliminate the ASoC
level wrapper for I2C I/O reducing the amount of duplicated functionality.

Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 13:20:42 +09:00
Mark Brown 0e7cb14512 Merge remote-tracking branches 'asoc/topic/ak4671', 'asoc/topic/cs42l51' and 'asoc/topic/alc5623' into asoc-io 2014-02-23 13:20:21 +09:00
Markus Pargmann 3154cc7404 ASoC: tlv320aic32x4: Rearrange clock tree shutdown
Rearrange clock tree shutdown to disable them in the reversed order of
startup. First disable all dividers, then PLL followed by master clock.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 12:59:34 +09:00
Markus Pargmann 239b669b2d ASoC: tlv320aic32x4: Support for regulators
Support regulators to power up the codec. This patch also enables the
AVDD LDO if no AV regulator was found.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 12:59:31 +09:00
Markus Pargmann 98b664e2ce ASoC: tlv320aic32x4: Support for master clock
Add support for a master clock passed through DT. The master clock of
the codec is only active when the codec is in use.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 12:59:22 +09:00
Mark Brown 57374bb491 Merge remote-tracking branches 'asoc/fix/sta32x', 'asoc/fix/wm8400', 'asoc/fix/wm8770', 'asoc/fix/wm8900' and 'asoc/fix/wm8994' into asoc-linus 2014-02-23 12:20:34 +09:00
Mark Brown d853c0ccb3 Merge remote-tracking branches 'asoc/fix/ad1980' and 'asoc/fix/isabelle' into asoc-linus 2014-02-23 12:20:32 +09:00
Mark Brown 45d39cbf00 Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linus 2014-02-23 12:20:32 +09:00
Takashi Iwai 347e551264 ASoC: wm8997: Use ARRAY_SIZE() for SOC_VALUE_ENUM_SINGLE()
... to make clear the meaning of the argument.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 12:03:08 +09:00
Takashi Iwai daf152a21d ASoC: wm5102: Use ARRAY_SIZE() for SOC_VALUE_ENUM_SINGLE()
... to make clear the meaning of the argument.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 12:02:51 +09:00
Takashi Iwai d77c290af7 ASoC: tlv320dac33: Use SOC_ENUM_SINGLE_*_DECL()
Just replace with the helper macros.  No functional change at all.

Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 12:02:18 +09:00
Takashi Iwai 26d04ca8c4 ASoC: lm49453: Use SOC_ENUM_SINGLE_DECL()
Just replace with the helper macro.  No functional change at all.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 12:01:57 +09:00
Takashi Iwai 52a5b545bc ASoC: cs42l73: Use SOC_ENUM_SINGLE_DECL()
Just replace with the helper macro.  No functional change at all.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 12:01:26 +09:00
Takashi Iwai 2e86434f9e ASoC: ad1836: Use SOC_ENUM_SINGLE_DECL()
Just replace with the helper macro.  No functional change at all.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 12:01:02 +09:00
Takashi Iwai 09981dcb77 ASoC: wm9705: Use SOC_ENUM_SINGLE_DECL()
Just replace with the helper macro.  No functional change at all.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 12:00:17 +09:00