If the decoder outputs an EO_TRACE element, it means the end of the
trace buffer; this is a discontinuity and in this case the end of trace
data needs to be saved.
This patch generates a CS_ETM_DISCONTINUITY packet for the EO_TRACE
element hereby flushing the end of trace data in cs-etm.c.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-8-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The CoreSight tracer driver might insert barrier packets between
different buffers, thus the decoder can spot the boundaries based on the
barrier packet; it is possible for the decoder to hit a barrier packet
and emit a NO_SYNC element, then the decoder will find a periodic
synchronisation point inside that next trace block that starts the trace
again but does not have the TRACE_ON element as indicator - usually
because this trace block has wrapped the buffer so we have lost the
original point when the trace was enabled.
In the first case it causes the insertion of a OCSD_GEN_TRC_ELEM_NO_SYNC
in the middle of the tracing stream, but as we were not handling the
NO_SYNC element properly this ends up making users miss the
discontinuity indications.
Though OCSD_GEN_TRC_ELEM_NO_SYNC is different from CS_ETM_TRACE_ON when
output from the decoder, both indicate that the trace data is
discontinuous; this patch treats OCSD_GEN_TRC_ELEM_NO_SYNC as a trace
discontinuity and generates a CS_ETM_DISCONTINUITY packet for it, so
cs-etm can handle the discontinuity for this case, finally it saves the
last trace data for the previous trace block and restart samples for the
new block.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-7-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
TRACE_ON element is used at the beginning of trace, it also can be
appeared in the middle of trace data to indicate discontinuity; for
example, it's possible to see multiple TRACE_ON elements in the trace
stream if the trace is being limited by address range filtering.
Furthermore, except TRACE_ON element is for discontinuity, NO_SYNC and
EO_TRACE also can be used to indicate discontinuity, though they are
used for different scenarios for which the trace is interrupted.
This patch renames sample type CS_ETM_TRACE_ON to CS_ETM_DISCONTINUITY,
firstly the new name describes more closely the purpose of the packet;
secondly this is a preparation for other output elements which also
cause the trace discontinuity thus they can share the same one packet
type.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-6-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The values in enumeration cs_etm_sample_type are defined with setting
bit N for each packet type, this is not suggested in the usual case.
This patch refactor cs_etm_sample_type by converting from bit shifting
values to continuous numbers.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-5-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cs_etm_decoder::trace_on is being assigned when TRACE_ON or NO_SYNC
element is coming, but it is never used hence it is redundant and can
be removed.
So let's remove 'trace_on' field from cs_etm_decoder struct.
Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-4-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At the end of trace buffer handling, function cs_etm__flush() is invoked
to flush any remaining branch stack entries. As a side effect, it also
generates branch sample, because the 'etmq->packet' doesn't contains any
new coming packet but point to one stale packet after packets swapping,
so it wrongly makes synthesize branch samples with stale packet info.
We could review below detailed flow which causes issue:
Packet1: start_addr=0xffff000008b1fbf0 end_addr=0xffff000008b1fbfc
Packet2: start_addr=0xffff000008b1fb5c end_addr=0xffff000008b1fb6c
step 1: cs_etm__sample():
sample: ip=(0xffff000008b1fbfc-4) addr=0xffff000008b1fb5c
step 2: flush packet in cs_etm__run_decoder():
cs_etm__run_decoder()
`-> err = cs_etm__flush(etmq, false);
sample: ip=(0xffff000008b1fb6c-4) addr=0xffff000008b1fbf0
Packet1 and packet2 are two continuous packets, when packet2 is the new
coming packet, cs_etm__sample() generates branch sample for these two
packets and use [packet1::end_addr - 4 => packet2::start_addr] as branch
jump flow, thus we can see the first generated branch sample in step 1.
At the end of cs_etm__sample() it swaps packets so 'etm->prev_packet'=
packet2 and 'etm->packet'=packet1, so far it's okay for branch sample.
If packet2 is the last one packet in trace buffer, even there have no
any new coming packet, cs_etm__run_decoder() invokes cs_etm__flush() to
flush branch stack entries as expected, but it also generates branch
samples by taking 'etm->packet' as a new coming packet, thus the branch
jump flow is as [packet2::end_addr - 4 => packet1::start_addr]; this
is the second sample which is generated in step 2. So actually the
second sample is a stale sample and we should not generate it.
This patch introduces a new function cs_etm__end_block(), at the end of
trace block this function is invoked to only flush branch stack entries
and thus can avoid to generate branch sample for stale packet.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-3-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The structure cs_etm_queue uses 'prev_packet' to point to previous
packet, this can be used to combine with new coming packet to generate
samples.
In function cs_etm__flush() it swaps packets only when the flag
'etm->synth_opts.last_branch' is true, this means that it will not swap
packets if without option '--itrace=il' to generate last branch entries;
thus for this case the 'prev_packet' doesn't point to the correct
previous packet and the stale packet still will be used to generate
sequential sample. Thus if dump trace with 'perf script' command we can
see the incorrect flow with the stale packet's address info.
This patch corrects packets swapping in cs_etm__flush(); except using
the flag 'etm->synth_opts.last_branch' it also checks the another flag
'etm->sample_branches', if any flag is true then it swaps packets so can
save correct content to 'prev_packet'. Finally this can fix the wrong
program flow dumping issue.
The patch has a minor refactoring to use 'etm->synth_opts.last_branch'
instead of 'etmq->etm->synth_opts.last_branch' for condition checking,
this is consistent with that is done in cs_etm__sample().
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-2-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll start adding more perf-syscall stuff, so lets do this prep step so
that the next ones are just about adding more fields.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-vac4sn1ns1vj4y07lzj7y4b8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll start adding more perf-syscall stuff, so lets do this prep step so
that the next ones are just about adding more fields.
Run it with the .c file once to cache the .o file:
# trace --filter-pids 2834,2199 -e openat,augmented_raw_syscalls.c
LLVM: dumping augmented_raw_syscalls.o
0.000 ( 0.021 ms): tmux: server/4952 openat(dfd: CWD, filename: /proc/5691/cmdline ) = 11
349.807 ( 0.040 ms): DNS Res~er #39/11082 openat(dfd: CWD, filename: /etc/hosts, flags: CLOEXEC ) = 44
4988.759 ( 0.052 ms): gsd-color/2431 openat(dfd: CWD, filename: /etc/localtime ) = 18
4988.976 ( 0.029 ms): gsd-color/2431 openat(dfd: CWD, filename: /etc/localtime ) = 18
^C[root@quaco bpf]#
From now on, we can use just the newly built .o file, skipping the
compilation step for a faster startup:
# trace --filter-pids 2834,2199 -e openat,augmented_raw_syscalls.o
0.000 ( 0.046 ms): DNS Res~er #39/11088 openat(dfd: CWD, filename: /etc/hosts, flags: CLOEXEC ) = 44
1946.408 ( 0.190 ms): systemd/1 openat(dfd: CWD, filename: /proc/1071/cgroup, flags: CLOEXEC ) = 20
1946.792 ( 0.215 ms): systemd/1 openat(dfd: CWD, filename: /proc/954/cgroup, flags: CLOEXEC ) = 20
^C#
Now on to do the same in the builtin-trace.c side of things.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-k8mwu04l8es29rje5loq9vg7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we don't always carry that __bpf_output__ map, leaving that to
the scripts wanting to use that facility.
'perf trace' will be changed to look if that map is present and only
setup the bpf-output events if so.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-azwys8irxqx9053vpajr0k5h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just another map, this time an BPF_MAP_TYPE_ARRAY, stating with
one bool per syscall, stating if it should be filtered or not.
So, with a pre-built augmented_raw_syscalls.o file, we use:
# perf trace -e open*,augmented_raw_syscalls.o
0.000 ( 0.016 ms): DNS Res~er #37/29652 openat(dfd: CWD, filename: /etc/hosts, flags: CLOEXEC ) = 138
187.039 ( 0.048 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /etc/fstab, flags: CLOEXEC ) = 11
187.348 ( 0.041 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
188.793 ( 0.036 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
189.803 ( 0.029 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
190.774 ( 0.027 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
284.620 ( 0.149 ms): DataStorage/3076 openat(dfd: CWD, filename: /home/acme/.mozilla/firefox/ina67tev.default/SiteSecurityServiceState.txt, flags: CREAT|TRUNC|WRONLY, mode: IRUGO|IWUSR|IWGRP) = 167
^C#
What is it that this gsd-housekeeping thingy needs to open
/proc/self/mountinfo four times periodically? :-)
This map will be extended to tell per-syscall parameters, i.e. how many
bytes to copy per arg, using the function signature to get the types and
then the size of those types, via BTF.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-cy222g9ucvnym3raqvxp0hpg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So when we do something like:
# perf trace -e open*,augmented_raw_syscalls.o
We need to set trace->trace_syscalls because there is logic that use
that when mixing strace-like output with other events, such as scheduler
tracepoints, but with that set we ended up having multiple
raw_syscalls:sys_{enter,exit} setup, which garbled the output, so
check if trace->augmented_raw_syscalls is set and avoid the two extra
tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-kjmnbrlgu0c38co1ye8egbsb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename it to trace__set_ev_qualifier_tp_filter(), as this just sets up
tracepoint filters on the raw_syscalls:sys_{enter,exit} tracepoints, and
since we're going to do the same for the augmented_raw_syscalls
codepath, when used, rename it to clarify.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-8bjsul8x7osw7nxjodnyfn14@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So we could propagate distro flags into libperf-jvmti.so library.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181212132940.840-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid this warning:
CC /tmp/build/perf/util/s390-cpumsf.o
util/s390-cpumsf.c: In function 's390_cpumsf_samples':
util/s390-cpumsf.c:508:3: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'off_t' [-Wformat=]
pr_err("[%#08" PRIx64 "] Invalid AUX trailer entry TOD clock base\n",
^
Now the various Android cross toolchains used in the perf tools
container test builds are all clean and we can remove this:
export EXTRA_MAKE_ARGS="WERROR=0"
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lkml.kernel.org/n/tip-5rav4ccyb0sjciysz2i4p3sx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are systems such as the Android NDK API level 24 has the
open_memstream() function but doesn't provide a prototype, adding noise
to the build:
builtin-timechart.c: In function 'cat_backtrace':
builtin-timechart.c:486:2: warning: implicit declaration of function 'open_memstream' [-Wimplicit-function-declaration]
FILE *f = open_memstream(&p, &p_len);
^
builtin-timechart.c:486:2: warning: nested extern declaration of 'open_memstream' [-Wnested-externs]
builtin-timechart.c:486:12: warning: initialization makes pointer from integer without a cast
FILE *f = open_memstream(&p, &p_len);
^
Define a LACKS_OPEN_MEMSTREAM_PROTOTYPE define so that code needing that
can get a prototype.
Checked in the bionic git repo to be available since level 23:
https://android.googlesource.com/platform/bionic/+/master/libc/include/stdio.h#241
FILE* open_memstream(char** __ptr, size_t* __size_ptr) __INTRODUCED_IN(23);
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-343ashae97e5bq6vizusyfno@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reducing this noise when cross building to the Android NDK:
util/header.c: In function 'perf_header__fprintf_info':
util/header.c:2710:45: warning: pointer targets in passing argument 1 of 'ctime' differ in signedness [-Wpointer-sign]
fprintf(fp, "# captured on : %s", ctime(&st.st_ctime));
^
In file included from util/../perf.h:5:0,
from util/evlist.h:11,
from util/header.c:22:
/opt/android-ndk-r15c/platforms/android-26/arch-arm/usr/include/time.h:81:14: note: expected 'const time_t *' but argument is of type 'long unsigned int *'
extern char* ctime(const time_t*) __LIBC_ABI_PUBLIC__;
^
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-6bz74zp080yhmtiwb36enso9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are systems such as the Android NDK API level 24 has the
sigqueue() function but doesn't provide a prototype, adding noise to the
build:
util/evlist.c: In function 'perf_evlist__prepare_workload':
util/evlist.c:1494:4: warning: implicit declaration of function 'sigqueue' [-Wimplicit-function-declaration]
if (sigqueue(getppid(), SIGUSR1, val))
^
util/evlist.c:1494:4: warning: nested extern declaration of 'sigqueue' [-Wnested-externs]
Define a LACKS_SIGQUEUE_PROTOTYPE define so that code needing that can
get a prototype.
Checked in the bionic git repo to be available since level 23:
https://android.googlesource.com/platform/bionic/+/master/libc/include/signal.h#123
int sigqueue(pid_t __pid, int __signal, const union sigval __value) __INTRODUCED_IN(23);
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-lmhpev1uni9kdrv7j29glyov@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Noticed while working on renameat2.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8omchrcjcvlwoxxv6wrjehfh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I was trigger happy on this one, as using ordered_events as implemented
by Jiri for use with the --block code under discussion on lkml incurs
in delaying processing to form batches that then get ordered and then
printed.
With 'perf trace' we want to process the events as they go, without that
delay, and doing it that way works well for the common case which is to
trace a thread or a workload started by 'perf trace'.
So revert back to not using ordered_events but add an option to select
that mode so that users can experiment with their particular use case to
see if works better, i.e. if the added delay is not a problem and the
ordering helps.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8ki7sld6rusnjhhtaly26i5o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just hide a bit more how events gets delivered, hiding ordered_events
details from the main loop.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-lxwwf3238ta4neq2zh1y1h45@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some 'perf stat' options do not make sense to be negated (event,
cgroup), some do not have negated path implemented (metrics). Due to
that, it is better to disable the "no-" prefix for them, since
otherwise, the later opt-parsing segfaults.
Before:
$ perf stat --no-metrics -- ls
Segmentation fault (core dumped)
After:
$ perf stat --no-metrics -- ls
Error: option `no-metrics' isn't available
Usage: perf stat [<options>] [<command>]
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LPU-Reference: 1485912065.62416880.1544457604340.JavaMail.zimbra@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the first line was used as a test identification, it needs to be
skipped by shell_test__description() function now.
Further notes from Hendrik:
It might be worth to note that adding the shebang is necessary to spot
them as scripts.
Using /bin/sh looks fine to. Just briefly checked whether the scripts
contains some bash-specifics, which is not the case.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 2127419430.57657104.1542836358464.JavaMail.zimbra@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
addr_filter__entire_dso() uses the first and last symbols from a dso,
and so does not work when there are no symbols. Alter it to filter the
whole file instead.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 1b36c03e35 ("perf record: Add support for using symbols in address filters")
Link: http://lkml.kernel.org/r/20181127084634.12469-1-adrian.hunter@intel.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used outside dso.c in a followup patch, so rename it and make it
non-static.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181127084634.12469-1-adrian.hunter@intel.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sort events to provide the precise outcome of ordered events, just like
is done with 'perf report' and 'perf top'.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dmitry Levin <ldv@altlinux.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Luis Cláudio Gonçalves <lclaudio@uudg.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181205160509.1168-9-jolsa@kernel.org
[ split from a larger patch, added trace__ prefixes to new 'struct trace' methods ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the timestamp in the first event in the queue.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dmitry Levin <ldv@altlinux.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Luis Cláudio Gonçalves <lclaudio@uudg.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/n/tip-appp27jw1ul8kgg872j43r5o@git.kernel.org
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mov event delivery code to a new trace__deliver_event() function, so
it's easier to add ordered delivery coming in the following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dmitry Levin <ldv@altlinux.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Luis Cláudio Gonçalves <lclaudio@uudg.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181205160509.1168-8-jolsa@kernel.org
[ Add trace__ prefix to the deliver_event method ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add OE_FLUSH__TIME flush type, to be able to flush only certain amount
of the queue based on the provided timestamp. It will be used in the
following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dmitry Levin <ldv@altlinux.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Luis Cláudio Gonçalves <lclaudio@uudg.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181205160509.1168-7-jolsa@kernel.org
[ Fix the build on older systems such as centos 5 and 6 where 'time' shadows a global declaration ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce basic 'perf annotate' support for ARC to be able to use
anotation via stdio interface.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Brodkin <alexey.brodkin@synopsys.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Link: http://lkml.kernel.org/r/20181204175118.25232-1-Eugeniy.Paltsev@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
According to definition of snprintf, it gets size factor including
null('\0') byte. So '-1' is not neccessary. Also it will be helpful
unfied style with other cases. (eg. builtin-script.c)
Signed-off-by: Sihyeon Jang <uneedsihyeon@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181201154603.10093-1-uneedsihyeon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sending a part which was missed between v12 and v13 of the patch set
introducing AIO trace streaming for perf record mode.
The part is essential to avoid memory leakage during deallocation of AIO
related trace data buffers.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/e5d3154e-1583-83bb-9527-28ddbc6dbf9d@linux.intel.com
[ No need to test for NULL before calling zfree() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
util/parse-events.c: In function 'print_symbol_events':
util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
strncpy(name, syms->symbol, MAX_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'print_symbol_events.constprop',
inlined from 'print_events' at util/parse-events.c:2508:2:
util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
strncpy(name, syms->symbol, MAX_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'print_symbol_events.constprop',
inlined from 'print_events' at util/parse-events.c:2511:2:
util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
strncpy(name, syms->symbol, MAX_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 947b4ad1d1 ("perf list: Fix max event string size")
Link: https://lkml.kernel.org/n/tip-b663e33bm6x8hrkie4uxh7u2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
In this case the 'target' buffer is coming from a list of build-ids that
are expected to have a len of at most (SBUILD_ID_SIZE - 1) chars, so
probably we're safe, but since we're using strncpy() here, use strlcpy()
instead to provide the intended safety checking without the using the
problematic strncpy() function.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
util/probe-file.c: In function 'probe_cache__open.isra.5':
util/probe-file.c:427:3: error: 'strncpy' specified bound 41 equals destination size [-Werror=stringop-truncation]
strncpy(sbuildid, target, SBUILD_ID_SIZE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 1f3736c9c8 ("perf probe: Show all cached probes")
Link: https://lkml.kernel.org/n/tip-l7n8ggc9kl38qtdlouke5yp5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
In this case we are actually setting the null byte at the right place,
but since we pass the buffer size as the limit to strncpy() and not
it minus one, gcc ends up warning us about that, see below. So, lets
just switch to the shorter form provided by strlcpy().
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
ui/tui/helpline.c: In function 'tui_helpline__push':
ui/tui/helpline.c:27:2: error: 'strncpy' specified bound 512 equals destination size [-Werror=stringop-truncation]
strncpy(ui_helpline__current, msg, sz)[sz - 1] = '\0';
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: e6e9046879 ("perf ui: Introduce struct ui_helpline")
Link: https://lkml.kernel.org/n/tip-d1wz0hjjsh19xbalw69qpytj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
In this specific case this would only happen if fgets() was buggy, as
its man page states that it should read one less byte than the size of
the destination buffer, so that it can put the nul byte at the end of
it, so it would never copy 255 non-nul chars, as fgets reads into the
orig buffer at most 254 non-nul chars and terminates it. But lets just
switch to strlcpy to keep the original intent and silence the gcc 8.2
warning.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
In function 'cpu_model',
inlined from 'svg_cpu_box' at util/svghelper.c:378:2:
util/svghelper.c:337:5: error: 'strncpy' output may be truncated copying 255 bytes from a string of length 255 [-Werror=stringop-truncation]
strncpy(cpu_m, &buf[13], 255);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Fixes: f48d55ce78 ("perf: Add a SVG helper library file")
Link: https://lkml.kernel.org/n/tip-xzkoo0gyr56gej39ltivuh9g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we make sure the destination buffer has at least strlen(orig) + 1,
no need to do a strncpy(dest, orig, strlen(orig)), just use strcpy(dest,
orig).
This silences this gcc 8.2 warning on Alpine Linux:
In function 'add_man_viewer',
inlined from 'perf_help_config' at builtin-help.c:284:3:
builtin-help.c:192:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
strncpy((*p)->name, name, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
builtin-help.c: In function 'perf_help_config':
builtin-help.c:187:15: note: length computed here
size_t len = strlen(name);
^~~~~~~~~~~~
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 0780060124 ("perf_counter tools: add in basic glue from Git")
Link: https://lkml.kernel.org/n/tip-2f69l7drca427ob4km8i7kvo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
util/header.c: In function 'perf_event__synthesize_event_update_name':
util/header.c:3625:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
strncpy(ev->data, evsel->name, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/header.c:3618:15: note: length computed here
size_t len = strlen(evsel->name);
^~~~~~~~~~~~~~~~~~~
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: a6e5281780 ("perf tools: Add event_update event unit type")
Link: https://lkml.kernel.org/n/tip-wycz66iy8dl2z3yifgqf894p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
util/header.c: In function 'perf_event__synthesize_event_update_unit':
util/header.c:3586:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
strncpy(ev->data, evsel->unit, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/header.c:3579:16: note: length computed here
size_t size = strlen(evsel->unit);
^~~~~~~~~~~~~~~~~~~
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: a6e5281780 ("perf tools: Add event_update event unit type")
Link: https://lkml.kernel.org/n/tip-fiikh5nay70bv4zskw2aa858@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
In function 'decompress_kmodule',
inlined from 'dso__decompress_kmodule_fd' at util/dso.c:305:9:
util/dso.c:298:3: error: 'strncpy' destination unchanged after copying no bytes [-Werror=stringop-truncation]
strncpy(pathname, tmpbuf, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CC /tmp/build/perf/util/values.o
CC /tmp/build/perf/util/debug.o
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: c9a8a6131f ("perf tools: Move the temp file processing into decompress_kmodule")
Link: https://lkml.kernel.org/n/tip-tl2hdxj64tt4k8btbi6a0ugw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is re-using the mechanic set forth by ETMv3 to add support
for PTM decoding. Configuration for both encoding protocol is similar
but the generated stream itself is very different, hence requiring
special handling.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1543955944-10042-4-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for the creation of packet printer and decoder for the ETMv3
trace architecture. That way traces generated by tracers adhering to
that trace protocol can be handled properly by the perf infrastructure.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1543955944-10042-3-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch deals with the proper initialisation of configuration
parameters for the ETMv3 trace protocol in order to properly handle
packets generated by tracers following this specification.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1543955944-10042-2-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the perf_top__reset_sample_counters() call to right after we
display the counters so we can see the updated numbers for longer.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-o72pyiwt05f3p2juprwmz2jo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we display the "Too slow to read ring buffer.." helpline only
in the slow reader thread. This patch triggers it also when the
processing thread drops samples, because it has the same reason, which
is too many data on input.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-bnev2mloavyurmgchcr3o24o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add drop count to 'perf top' headers:
# perf top --stdio
PerfTop: 3549 irqs/sec kernel:51.8% exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles:ppp], (all, 8 CPUs)
# perf top
Samples: 0 of event 'cycles:ppp', 4000 Hz, Event count (approx.): 0 lost: 0/0 drop: 0/0
The format is: <current period drop>/<total drop>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-2lj87zz8tq9ye1ntax3ulw0n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Drop samples from processing thread if they get behind the latest event
read from the kernel maps. If it gets behind more than the refresh rate
(-d option), drop the sample.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-x533ra5c1pgofvbtsizzuydd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So we can get out of hist processing ASAP on user request.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-r8aufbgbixr2f85s3wcoaw9v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use conditional variable logic to synchronize between the reading and
processing threads. Currently it's done by having mutex around rotation
code.
Using a POSIX cond variable to sync both threads after queues rotation:
Process thread:
- Detects data
- Switches queues
- Sets rotate variable
- Waits in pthread_cond_wait()
Read thread:
- Detects rotate is set
- Kicks the process thread with a pthread_cond_signal()
After this rotation is safely completed and both threads can continue
with the new queue.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-3rdeg23rv3brvy1pwt3igvyw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new thread that takes care of the hist creating to alleviate the
main reader thread so it can keep perf mmaps served in time so that we
reduce the possibility of losing events.
The 'perf top' command now spawns 2 extra threads, the data processing
is the following:
1) The main thread reads the data from mmaps and queues them to
ordered events object;
2) The processing threads takes the data from the ordered events
object and create initial histogram;
3) The GUI thread periodically sorts the initial histogram and
presents it.
Passing the data between threads 1 and 2 is done by having 2 ordered
events queues. One is always being stored by thread 1 while the other is
flushed out in thread 2.
Passing the data between threads 2 and 3 stays the same as was initially
for threads 1 and 3.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-hhf4hllgkmle9wl1aly1jli0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can't display the UI box saying that we are slow in the reader
thread. That will make 'perf top' even slower and the user even more
angry ;-)
Move the UI box message from the reader thread to the UI thread and
change it to a helpline, so there's no need to 'press any key'.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-x4k0iuw7tt6mywsaguq6jfwu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a 'lost count' to 'perf top' headers:
# perf top --stdio
PerfTop: 3850 irqs/sec kernel:49.0% exact: 100.0% lost: 0/0 [4000Hz cycles:ppp], (all, 8 CPUs)
# perf top
Samples: 0 of event 'cycles:ppp', 4000 Hz, Event count (approx.): 0 lost: 0/0
The format is: <current period lost>/<total lost>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-zo11rn270gij5jtp8fknpf8u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will need it in following patch, where we can't use the
container_of() trick to get the higher level object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-vgs9aoek21v14o3obza586yy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Decide to use the progress bar one level higher, we will need this in
following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-ocjdukp2a8ujikkmafd0j5zv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When looking at PT or brstackinsn traces with 'perf script' it can be
very useful to see the source code. This adds a simple facility to print
them with 'perf script', if the information is available through dwarf
% perf record ...
% perf script -F insn,ip,sym,srccode
...
4004c6 main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004c6 main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004b3 main
6 v++;
% perf record -b ...
% perf script -F insn,ip,sym,srccode,brstackinsn
...
main+22:
0000000000400543 insn: e8 ca ff ff ff # PRED
|18 f1();
f1:
0000000000400512 insn: 55
|10 {
0000000000400513 insn: 48 89 e5
0000000000400516 insn: b8 00 00 00 00
|11 f2();
000000000040051b insn: e8 d6 ff ff ff # PRED
f2:
00000000004004f6 insn: 55
|5 {
00000000004004f7 insn: 48 89 e5
00000000004004fa insn: 8b 05 2c 0b 20 00
|6 c = a / b;
0000000000400500 insn: 8b 0d 2a 0b 20 00
0000000000400506 insn: 99
0000000000400507 insn: f7 f9
0000000000400509 insn: 89 05 29 0b 20 00
000000000040050f insn: 90
|7 }
0000000000400510 insn: 5d
0000000000400511 insn: c3 # PRED
f1+14:
0000000000400520 insn: b8 00 00 00 00
|12 f2();
0000000000400525 insn: e8 cc ff ff ff # PRED
f2:
00000000004004f6 insn: 55
|5 {
00000000004004f7 insn: 48 89 e5
00000000004004fa insn: 8b 05 2c 0b 20 00
|6 c = a / b;
Not supported for callchains currently, would need some layout changes
there.
Committer notes:
Fixed the build on Alpine Linux (3.4 .. 3.8) by addressing this
warning:
In file included from util/srccode.c:19:0:
/usr/include/sys/fcntl.h:1:2: error: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp]
#warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
^~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181204001848.24769-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To cope with older kernels that don't have this patch backported:
026842d148 ("tracing/syscalls: Rename "/format" tracepoint field name "nr" to "__syscall_nr:")
This makes 'perf trace' work again in RHEL7 kernels.
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-6h1syw2isegnhb1bjmtr9x9k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The default timeout of 500ms for parsing /proc/<pid>/maps files is too
short for profiling many of our services.
This can be overridden by passing --proc-map-timeout to the relevant
command but it'd be nice to globally increase our default value.
This patch permits setting a different default with the
core.proc-map-timeout config file parameter.
Signed-off-by: Mark Drayton <mbd@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181204203420.1683114-1-mbd@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Go over the tools/ files that are maintained in Arnaldo's tree and
fix common typos: half of them were in comments, the other half
in JSON files.
No change in functionality intended.
Committer notes:
This was split from a larger patch as there are code that is,
additionally, maintained outside the kernel tree, so to ease
cherry-picking and/or backporting, split this into multiple patches.
Just typos in comments, no need to backport, reducing the possibility of
possible backporting artifacts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181203102200.GA104797@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Go over the tools/ files that are maintained in Arnaldo's tree and
fix common typos: half of them were in comments, the other half
in JSON files.
No change in functionality intended.
Committer notes:
This was split from a larger patch as there are code that is,
additionally, maintained outside the kernel tree, so to ease cherry
picking and/or backporting, split this into multiple patches.
This one has information that is presented to the user, albeit in debug
mode.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20181203102200.GA104797@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Go over the tools/ files that are maintained in Arnaldo's tree and
fix common typos: half of them were in comments, the other half
in JSON files.
No change in functionality intended.
Committer notes:
This was split from a larger patch as there are code that is,
additionally, maintained outside the kernel tree, so to ease cherry
picking and/or backporting, split this into multiple patches.
In this particular case, it affects documentation, so may be interesting
to cherry pick as it is information that is presented to the user.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181203102200.GA104797@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Go over the tools/ files that are maintained in Arnaldo's tree and
fix common typos: half of them were in comments, the other half
in JSON files.
( Care should be taken not to re-import these typos in the future,
if the JSON files get updated by the vendor without fixing the typos. )
No change in functionality intended.
Committer notes:
This was split from a larger patch as there are code that is,
additionally, maintained outside the kernel tree, so to ease cherry
picking and/or backporting, split this into multiple patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181203102200.GA104797@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The breakpoint tests on the ARM 32-bit kernel are broken in several
ways.
The breakpoint length requested does not necessarily match whether the
function address has the Thumb bit (bit 0) set or not, and this does
matter to the ARM kernel hw_breakpoint infrastructure. See [1] for
background.
[1]: https://lkml.org/lkml/2018/11/15/205
As Will indicated, the overflow handling would require single-stepping
which is not supported at the moment. Just disable those tests for the
ARM 32-bit platforms and update the comment above to explain these
limitations.
Co-developed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181203191138.2419-1-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds support for generating instruction samples from trace of
AArch32 programs using the A32 and T32 instruction sets.
T32 has variable 2 or 4 byte instruction size, so the conversion between
addresses and instruction counts requires extra information from the
trace decoder, requiring version 0.10.0 of OpenCSD. A check for the
OpenCSD library version has been added to the feature check for OpenCSD.
Signed-off-by: Robert Walker <robert.walker@arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1543839526-30348-1-git-send-email-robert.walker@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, its API should be
straightforward. The __tep_data2host*() functions are going to no longer
be available as a libtraceevent API, tep_read_number() should be used
instead. This patch replaces __tep_data2host*() usage with
tep_read_number() in perf.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181130154647.743979275@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts.
This renames 'struct tep_event_format' to 'struct tep_event', which
describes more closely the purpose of the struct.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181130154647.436403995@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[ Fixup conflict with 6e33c250a88f ("tools lib traceevent: Fix compile warnings in tools/lib/traceevent/event-parse.c") ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add explanations for new columns "IPC" and "IPC coverage" in perf
documentation.
v5:
---
Update the description according to Ingo's comments.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1543586097-27632-5-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We often use the symbol__annotate2() to annotate a specified symbol.
While annotating may take some time, so in order to avoid annotating the
same symbol repeatedly, the patch creates a new flag to indicate the
symbol has been annotated.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1543586097-27632-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If not, then just use what is in asm-generic. This fixes the build for
my sh4, m68k and riscv64 perf test build containers that were failing
due to 80ee5668b8 ("perf beauty: Add a generator for MAP_ mmap's flag
constants"), that were not covered in the cset introducing those
tools/arch/*/include/uapi/asm/mman.h files.
f3539c12d8 ("tools include: Add uapi mman.h for each architecture")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 80ee5668b8 ("perf beauty: Add a generator for MAP_ mmap's flag constants")
Link: https://lkml.kernel.org/n/tip-rpy9t2e0wxpnum1yvxhreafe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Multi AIO trace writing allows caching more kernel data into userspace
memory postponing trace writing for the sake of overall profiling data
thruput increase. It could be seen as kernel data buffer extension into
userspace memory.
With an --aio option value different from 0 (default value is 1) the
tool has capability to cache more and more data into user space along
with delegating spill to AIO.
That allows avoiding to suspend at record__aio_sync() between calls of
record__mmap_read_evlist() and increases profiling data thruput at the
cost of userspace memory.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/050bb053-e7f3-aa83-fde7-f27ff90be7f6@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The trace file offset is read once before mmaps iterating loop and
written back after all performance data is enqueued for aio writing.
The trace file offset is incremented linearly after every successful aio
write operation.
record__aio_sync() blocks till completion of the started AIO operation
and then proceeds.
record__aio_mmap_read_sync() implements a barrier for all incomplete
aio write requests.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/ce2d45e9-d236-871c-7c8f-1bed2d37e8ac@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The map->data buffer is used to preserve map->base profiling data for
writing to disk. AIO map->cblock is used to queue corresponding
map->data buffer for asynchronous writing.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5fcda10c-6c63-68df-383a-c6d9e5d1f918@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Users should never use 'pt=0', but if they do it may give a meaningless
error:
$ perf record -e intel_pt/pt=0/u uname
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for
event (intel_pt/pt=0/u).
Fix that by forcing 'pt=1'.
Committer testing:
# perf record -e intel_pt/pt=0/u uname
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (intel_pt/pt=0/u).
/bin/dmesg | grep -i perf may provide additional information.
# perf record -e intel_pt/pt=0/u uname
pt=0 doesn't make sense, forcing pt=1
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data ]
#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/b7c5b4e5-9497-10e5-fd43-5f3e4a0fe51d@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This basically replicates what was done for 'perf report' in:
b226a5a729 ("perf report: Allow user to specify path to kallsyms file")
This should help with resolving eBPF symbols, that are in kallsyms but,
of course, not in vmlinux.
Reported-by: Ivan Babrou <ibobrik@gmail.com>
Tested-by: Ivan Babrou <ibobrik@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-x52mx1ybq8128rtg9hjrj5qk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)). This
makes it more readable and also fix this warning detected by
err_cast.cocci:
tools/perf/util/bpf-loader.c:1606:11-18: WARNING: ERR_CAST can be used with op
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wen Yang <yellowriver2010@hotmail.com>
Cc: zhong.weidong@zte.com.cn
Link: http://lkml.kernel.org/r/20181127090610.28488-1-wen.yang99@zte.com.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix inconsistent use of tabs and spaces error:
# perf test 16 -v
16: Setup struct perf_event_attr :
--- start ---
test child forked, pid 20224
File "/usr/libexec/perf-core/tests/attr.py", line 119
log.warning("expected %s=%s, got %s" % (t, self[t], other[t]))
^
TabError: inconsistent use of tabs and spaces in indentation
test child finished with -1
---- end ----
Setup struct perf_event_attr: FAILED!
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181122140456.16817-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the 'sleep' command is provided by coreutils, then the "PERF_RECORD_*
events & perf_sample fields" test will fail because the MMAP name is
'coreutils' not 'sleep', and there is an extra COMM event. Fix the test
to detect that case.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181122135545.16295-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Branch stacks do not necessarily have the same cpumode as the 'ip'. Use
the fallback functions in those cases.
This patch depends on patch "perf tools: Add fallback functions for cases
where cpumode is insufficient".
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org # 4.19
Link: http://lkml.kernel.org/r/20181106210712.12098-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
thread__resolve() is used in the sample_addr_correlates_sym() cases
where 'addr' is a destination of a branch which does not necessarily
have the same cpumode as the 'ip'. Use the fallback function in that
case.
This patch depends on patch "perf tools: Add fallback functions for
cases where cpumode is insufficient".
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org # 4.19
Link: http://lkml.kernel.org/r/20181106210712.12098-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For branch stacks or branch samples, the sample cpumode might not be
correct because it applies only to the sample 'ip' and not necessary to
'addr' or branch stack addresses. Add fallback functions that can be
used to deal with those cases
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org # 4.19
Link: http://lkml.kernel.org/r/20181106210712.12098-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some architectures have a single address space for kernel and user
addresses, which makes it possible to determine if an address is in
kernel space or user space. Some don't, e.g.: sparc.
Cache that info in perf_env so that, for instance, code needing to
fallback failed symbol lookups at the kernel space in single address
space arches can lookup at userspace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org # 4.19
Link: http://lkml.kernel.org/r/20181106210712.12098-2-adrian.hunter@intel.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll set a new machine field based on env->arch, which for live mode,
like with 'perf top' means we need to use uname() to figure the name of
the arch, fix perf_env__arch() to consider both (env == NULL) and
(env->arch == NULL) as local operation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org # 4.19
Link: https://lkml.kernel.org/n/tip-vcz4ufzdon7cwy8dm2ua53xk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A double pointer is used in map__find() where a single pointer is enough
because the function doesn't affect the rbtree and the rbtree is locked.
Signed-off-by: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Eric Saint-Etienne <eric.saintetienne@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1542969759-24346-1-git-send-email-eric.saint.etienne@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using the -x option, perf stat prints CSV-style output with one
event per line. For each event, it prints the count, the unit, the
event name, the cgroup, and a bunch of other event specific fields (such
as insn per cycles).
When you use CSV-style mode, you expect a normalized output where each
event is printed with the same number of fields regardless of what it is
so it can easily be imported into a spreadsheet or parsed.
For instance, if an event does not have a unit, then print an empty
field for it.
Although this approach was implemented for the unit, it was not for the
cgroup.
When mixing cgroup and non-cgroup events, then non-cgroup events would
not show an empty field, instead the next field was printed, make
columns not line up correctly.
This patch fixes the cgroup output issues by forcing an empty field
for non-cgroup events as soon as one event has cgroup.
Before:
<not counted> @ @cycles @foo @ 0 @100.00@@
2531614 @ @cycles @6420922@100.00@ @
foo cgroup lines up with time_running!
After:
<not counted> @ @cycles @foo @0 @100.00@@
2594834 @ @cycles @ @5287372 @100.00@@
Fields line up.
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1541587845-9150-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 0aa802a794 ("perf stat: Get rid of extra clock display
function") introduced scale and unit for clock events. Thus,
perf_stat__update_shadow_stats() now saves scaled values of clock events
in msecs, instead of original nsecs. But while calculating values of
shadow stats we still consider clock event values in nsecs. This results
in a wrong shadow stat values. Ex,
# ./perf stat -e task-clock,cycles ls
<SNIP>
2.60 msec task-clock:u # 0.877 CPUs utilized
2,430,564 cycles:u # 1215282.000 GHz
Fix this by saving original nsec values for clock events in
perf_stat__update_shadow_stats(). After patch:
# ./perf stat -e task-clock,cycles ls
<SNIP>
3.14 msec task-clock:u # 0.839 CPUs utilized
3,094,528 cycles:u # 0.985 GHz
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: yuzhoujian@didichuxing.com
Fixes: 0aa802a794 ("perf stat: Get rid of extra clock display function")
Link: http://lkml.kernel.org/r/20181116042843.24067-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In debian/ubuntu its libssl-dev, but for fedora/RHEL/Centos/etc its
openssl-devel, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 8ee4646038 ("perf build: Add libcrypto feature detection")
Link: https://lkml.kernel.org/n/tip-lnxqszts6aq2c9jy4b7mlnym@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The weak functions, strcmp_cpuid_str() and get_cpuid_str(), are defined
in pmu.c.
Most of the cpuid related functions, including *_cpuid_str()'s
declaration and platform specific definition, are in header.c/h.
To make the declaration and definition of all cpuid related functions in
a consistent place, move the weak functions to header.c.
There is no functional change.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: http://lkml.kernel.org/r/20181121164939.13482-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf can take minutes to parse an image when -ffunction-section is used.
This is especially true with the kernel image when it is compiled this
way, which is the arm64 default since the patcheset "Enable deadcode
elimination at link time".
Perf organize maps using a rbtree. Whenever perf finds a new symbols, it
first searches this rbtree for the map it belongs to, by strcmp()'aring
section names. When it finds the map with the right name, it uses it to
add the symbol. With a usual image there aren't so many maps but when
using -ffunction-section there's basically one map per function. With
the kernel image that's north of 40,000 maps. For most symbols perf has
to parses the entire rbtree to eventually create a new map and add it.
Consequently perf spends most of the time browsing a rbtree that keeps
getting larger.
This performance fix introduces a secondary rbtree that indexes maps
based on the section name.
Signed-off-by: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Reviewed-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: David Aldridge <david.aldridge@oracle.com>
Reviewed-by: Rob Gardner <rob.gardner@oracle.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1542822679-25591-1-git-send-email-eric.saint.etienne@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Compiled Method Load Record (cmlr) is JDK specific interface to
access JVM stack info. This makes the jvmti agent code not compile under
another jdk, which does not support that.
Separating jvmti cmlr check into special feature check, and adding
HAVE_JVMTI_CMLR macro to indicate that.
Mark cmlr code in jvmti/libjvmti.c with HAVE_JVMTI_CMLR, so we can
compile it on system without cmlr support.
This change makes the jvmti compile with java-1.8.0-ibm package. It's
without the line numbers support, but the rest works.
Adding NO_JVMTI_CMLR compile variable for testing.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Gustavo Luiz Duarte <gduarte@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20181121154341.21521-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add JSON metrics (based on event list v1) for Cascadelake server
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/3ab97c73-c197-8555-1a35-b54636e667e6@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf tools cannot find the proper event list for the Cascadelake
server. Because the Cascadelake server and the Skylake server have the
same CPU model number, which are used by the perf tools to find the
event list.
The stepping for Skylake server is up to 4.
The stepping for Cascadelake server starts from 5.
The stepping can be used to distinguish between them.
The stepping is added in get_cpuid_str().
The stepping information for Skylake server is updated in mapfile.csv.
A x86 specific strcmp_cpuid_cmp() function is added to handle two CPUID
formats in mapfile.csv, "vendor-family-model-stepping" and
"vendor-family-model":
- If a cpuid-regular-expression from the mapfile.csv using the new
stepping format, a cpuid-string generated on the machine must include
stepping. Otherwise, it is a mismatch.
- If the cpuid-regular-expression using the old non-stepping format,
the stepping in the cpuid-string will be ignored.
The script, using environment string "PERF_CPUID" without stepping on
Skylake server, will be broken. If so, users must fix their scripts.
Committer notes:
Fixed this build error on centos:6 and debian:7:
arch/x86/util/header.c: In function 'is_full_cpuid':
arch/x86/util/header.c:82:39: error: declaration of 'cpuid' shadows a global declaration [-Werror=shadow]
arch/x86/util/header.c:12:1: error: shadowed declaration is here [-Werror=shadow]
arch/x86/util/header.c: In function 'strcmp_cpuid_str':
arch/x86/util/header.c:98:56: error: declaration of 'cpuid' shadows a global declaration [-Werror=shadow]
arch/x86/util/header.c:12:1: error: shadowed declaration is here [-Werror=shadow]
cc1: all warnings being treated as errors
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181114212416.15665-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We already have function to check if a given event is either
SW_CPU_CLOCK or SW_TASK_CLOCK. Utilize it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: yuzhoujian@didichuxing.com
Link: http://lkml.kernel.org/r/20181115095533.16930-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Depending on which functions are inlined in util/pmu.c, the snprintf()
calls in perf_pmu__parse_{scale,unit,per_pkg,snapshot}() might trigger a
warning:
util/pmu.c: In function 'pmu_aliases':
util/pmu.c:178:31: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 0 and 4095 [-Werror=format-truncation=]
snprintf(path, PATH_MAX, "%s/%s.unit", dir, name);
^~
I found this when trying to build perf from Linux 3.16 with gcc 8.
However I can reproduce the problem in mainline if I force
__perf_pmu__new_alias() to be inlined.
Suppress this by using scnprintf() as has been done elsewhere in perf.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20181111184524.fux4taownc6ndbx6@decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tool perf is useful for the performance analysis on the Hygon Dhyana
platform. But right now there is no Hygon support for it to analyze the
KVM guest os data. So add Hygon Dhyana support to it by checking vendor
string to share the code path of AMD.
Signed-off-by: Pu Wen <puwen@hygon.cn>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1542008451-31735-1-git-send-email-puwen@hygon.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This program benchmarks concurrent epoll_wait(2) for file descriptors
that are monitored with with EPOLLIN along various semantics, by a
single epoll instance. Such conditions can be found when using
single/combined or multiple queuing when load balancing.
Each thread has a number of private, nonblocking file descriptors,
referred to as fdmap. A writer thread will constantly be writing to the
fdmaps of all threads, minimizing each threads's chances of epoll_wait
not finding any ready read events and blocking as this is not what we
want to stress. Full details in the start of the C file.
Committer testing:
# perf bench
Usage:
perf bench [<common options>] <collection> <benchmark> [<options>]
# List of all available benchmark collections:
sched: Scheduler and IPC benchmarks
mem: Memory access benchmarks
numa: NUMA scheduling and MM benchmarks
futex: Futex stressing benchmarks
epoll: Epoll stressing benchmarks
all: All benchmarks
# perf bench epoll
# List of available benchmarks for collection 'epoll':
wait: Benchmark epoll concurrent epoll_waits
all: Run all futex benchmarks
# perf bench epoll wait
# Running 'epoll/wait' benchmark:
Run summary [PID 19295]: 3 threads monitoring on 64 file-descriptors for 8 secs.
[thread 0] fdmap: 0xdaa650 ... 0xdaa74c [ 328241 ops/sec ]
[thread 1] fdmap: 0xdaa900 ... 0xdaa9fc [ 351695 ops/sec ]
[thread 2] fdmap: 0xdaabb0 ... 0xdaacac [ 381423 ops/sec ]
Averaged 353786 operations/sec (+- 4.35%), total secs = 8
#
Committer notes:
Fix the build on debian:experimental-x-mips, debian:experimental-x-mipsel
and others:
CC /tmp/build/perf/bench/epoll-wait.o
bench/epoll-wait.c: In function 'writerfn':
bench/epoll-wait.c:399:12: error: format '%ld' expects argument of type 'long int', but argument 2 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
printinfo("exiting writer-thread (total full-loops: %ld)\n", iter);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~
bench/epoll-wait.c:86:31: note: in definition of macro 'printinfo'
do { if (__verbose) { printf(fmt, ## arg); fflush(stdout); } } while (0)
^~~
cc1: all warnings being treated as errors
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com> <jbaron@akamai.com>
Link: http://lkml.kernel.org/r/20181106152226.20883-2-dave@stgolabs.net
Link: http://lkml.kernel.org/r/20181106182349.thdkpvshkna5vd7o@linux-r8p5>
[ Applied above fixup as per Davidlohr's request ]
[ Use inttypes.h to print rlim_t fields, fixing the build on Alpine Linux / musl libc ]
[ Check if eventfd() is available, i.e. if HAVE_EVENTFD is defined ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A new 'perf bench epoll' will use this, and to disable it for older
systems, add a feature test for this API.
This is just a simple program that if successfully compiled, means that
the feature is present, at least at the library level, in a build that
sets the output directory to /tmp/build/perf (using O=/tmp/build/perf),
we end up with:
$ ls -la /tmp/build/perf/feature/test-eventfd*
-rwxrwxr-x. 1 acme acme 8176 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.bin
-rw-rw-r--. 1 acme acme 588 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.d
-rw-rw-r--. 1 acme acme 0 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.make.output
$ ldd /tmp/build/perf/feature/test-eventfd.bin
linux-vdso.so.1 (0x00007fff3bf3f000)
libc.so.6 => /lib64/libc.so.6 (0x00007fa984061000)
/lib64/ld-linux-x86-64.so.2 (0x00007fa984417000)
$ grep eventfd -A 2 -B 2 /tmp/build/perf/FEATURE-DUMP
feature-dwarf=1
feature-dwarf_getlocations=1
feature-eventfd=1
feature-fortify-source=1
feature-sync-compare-and-swap=1
$
The main thing here is that in the end we'll have -DHAVE_EVENTFD in
CFLAGS, and then the 'perf bench' entry needing that API can be
selectively pruned.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-wkeldwob7dpx6jvtuzl8164k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both futex and epoll need this call, and can cause build failure on
systems that don't have it pthread_attr_setaffinity_np().
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Link: http://lkml.kernel.org/r/20181109210719.pr7ohayuwqmfp2wl@linux-r8p5
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While working on augmented syscalls I got into this error:
# trace -vv --filter-pids 2469,1663 -e tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
<SNIP>
libbpf: map 0 is "__augmented_syscalls__"
libbpf: map 1 is "__bpf_stdout__"
libbpf: map 2 is "pids_filtered"
libbpf: map 3 is "syscalls"
libbpf: collecting relocating info for: '.text'
libbpf: relo for 13 value 84 name 133
libbpf: relocation: insn_idx=3
libbpf: relocation: find map 3 (pids_filtered) for insn 3
libbpf: collecting relocating info for: 'raw_syscalls:sys_enter'
libbpf: relo for 8 value 0 name 0
libbpf: relocation: insn_idx=1
libbpf: relo for 8 value 0 name 0
libbpf: relocation: insn_idx=3
libbpf: relo for 9 value 28 name 178
libbpf: relocation: insn_idx=36
libbpf: relocation: find map 1 (__augmented_syscalls__) for insn 36
libbpf: collecting relocating info for: 'raw_syscalls:sys_exit'
libbpf: relo for 8 value 0 name 0
libbpf: relocation: insn_idx=0
libbpf: relo for 8 value 0 name 0
libbpf: relocation: insn_idx=2
bpf: config program 'raw_syscalls:sys_enter'
bpf: config program 'raw_syscalls:sys_exit'
libbpf: create map __bpf_stdout__: fd=3
libbpf: create map __augmented_syscalls__: fd=4
libbpf: create map syscalls: fd=5
libbpf: create map pids_filtered: fd=6
libbpf: added 13 insn from .text to prog raw_syscalls:sys_enter
libbpf: added 13 insn from .text to prog raw_syscalls:sys_exit
libbpf: load bpf program failed: Operation not permitted
libbpf: failed to load program 'raw_syscalls:sys_exit'
libbpf: failed to load object 'tools/perf/examples/bpf/augmented_raw_syscalls.c'
bpf: load objects failed: err=-4009: (Incorrect kernel version)
event syntax error: 'tools/perf/examples/bpf/augmented_raw_syscalls.c'
\___ Failed to load program for unknown reason
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
If I then try to use strace (perf trace'ing 'perf trace' needs some more work
before its possible) to get a bit more info I get:
# strace -e bpf trace --filter-pids 2469,1663 -e tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_PERF_EVENT_ARRAY, key_size=4, value_size=4, max_entries=4, map_flags=0, inner_map_fd=0, map_name="__bpf_stdout__", map_ifindex=0}, 72) = 3
bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_PERF_EVENT_ARRAY, key_size=4, value_size=4, max_entries=4, map_flags=0, inner_map_fd=0, map_name="__augmented_sys", map_ifindex=0}, 72) = 4
bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_ARRAY, key_size=4, value_size=1, max_entries=500, map_flags=0, inner_map_fd=0, map_name="syscalls", map_ifindex=0}, 72) = 5
bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_HASH, key_size=4, value_size=1, max_entries=512, map_flags=0, inner_map_fd=0, map_name="pids_filtered", map_ifindex=0}, 72) = 6
bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_TRACEPOINT, insn_cnt=57, insns=0x1223f50, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(4, 18, 10), prog_flags=0, prog_name="sys_enter", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS}, 72) = 7
bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_TRACEPOINT, insn_cnt=18, insns=0x1224120, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(4, 18, 10), prog_flags=0, prog_name="sys_exit", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS}, 72) = -1 EPERM (Operation not permitted)
bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_TRACEPOINT, insn_cnt=18, insns=0x1224120, license="GPL", log_level=1, log_size=262144, log_buf="", kern_version=KERNEL_VERSION(4, 18, 10), prog_flags=0, prog_name="sys_exit", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS}, 72) = -1 EPERM (Operation not permitted)
bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_KPROBE, insn_cnt=18, insns=0x1224120, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(4, 18, 10), prog_flags=0, prog_name="sys_exit", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS}, 72) = -1 EPERM (Operation not permitted)
event syntax error: 'tools/perf/examples/bpf/augmented_raw_syscalls.c'
\___ Failed to load program for unknown reason
<SNIP similar output as without 'strace'>
#
I managed to create the maps, etc, but then installing the "sys_exit" hook into
the "raw_syscalls:sys_exit" tracepoint somehow gets -EPERMed...
I then go and try reducing the size of this new table:
+++ b/tools/perf/examples/bpf/augmented_raw_syscalls.c
@@ -47,6 +47,17 @@ struct augmented_filename {
#define SYS_OPEN 2
#define SYS_OPENAT 257
+struct syscall {
+ bool filtered;
+};
+
+struct bpf_map SEC("maps") syscalls = {
+ .type = BPF_MAP_TYPE_ARRAY,
+ .key_size = sizeof(int),
+ .value_size = sizeof(struct syscall),
+ .max_entries = 500,
+};
And after reducing that .max_entries a tad, it works. So yeah, the "unknown
reason" should be related to the number of bytes all this is taking, reduce the
default for pid_map()s so that we can have a "syscalls" map with enough slots
for all syscalls in most arches. And take notes about this error message,
improve it :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-yjzhak8asumz9e9hts2dgplp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we have the "filtered_pids" logic in place, no need to do this
rough filter to avoid the feedback loop from 'perf trace's own syscalls,
revert it.
This reverts commit 7ed71f124284359676b6496ae7db724fee9da753.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-88vh02cnkam0vv5f9vp02o3h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This makes the augmented_syscalls support the --filter-pids and
auto-filtered feedback loop pids just like when working without BPF,
i.e. with just raw_syscalls:sys_{enter,exit} and tracepoint filters.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zc5n453sxxm0tz1zfwwelyti@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Lookup for the first map named "filtered_pids" and, if augmenting
syscalls, i.e. if a BPF event is present and the
"__augmented_syscalls__" is present, then fill in that map with the pids
to filter, be it feedback loop ones (perf trace's pid, its father if it
is "sshd", more auto-filtered in the future) or the ones explicitely
stated in the tool command line via --filter-pids.
The code to actually fill in the map comes next.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-rhzytmw7qpe6lqyjxi1ded9t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As we'll need that name for a new function to set filters for both
tracepoints and BPF maps for filtering pids.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mdkck6hf3fnd21rz2766280q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To better reflect that this is a tracepoint filter, as opposed, for
instance to map based BPF filters.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-9138svli6ddcphrr3ymy9oy3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just to test filtering a bunch of pids, now its time to go and get that
hooked up in 'perf trace', right after we load the bpf program, if we
find a "pids_filtered" map defined, we'll populate it with the filtered
pids.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-1i9s27wqqdhafk3fappow84x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When testing system wide tracing without filtering the syscalls called
by 'perf trace' itself we get into a feedback loop, drop for now those
two syscalls, that are the ones that 'perf trace' does in its loop for
writing the syscalls it intercepts, to help with testing till we get
that filtering in place.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-rkbu536af66dbsfx51sr8yof@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used in the augmented_raw_syscalls.c to implement 'perf trace
--filter-pids'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-9sybmz4vchlbpqwx2am13h9e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Starting with a helper for a basic pid_map(), a hash using a pid as a
key.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-gdwvq53wltvq6b3g5tdmh0cw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leftover from when we started augmented_raw_syscalls.c from
tools/perf/examples/bpf/augmented_syscalls.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: e58a0322dbac ("perf examples bpf: Start augmenting raw_syscalls:sys_{start,exit}")
Link: https://lkml.kernel.org/n/tip-pmts9ls2skh8n3zisb4txudd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just to show where we'll hook pid based filters, and what we use to
obtain the current pid, using a BPF getpid() equivalent.
Now we need to remove that hardcoded PID with a BPF hash map, so that we
start by filtering 'perf trace's own PID, implement the --filter-pid
functionality, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-oshrcgcekiyhd0whwisxfvtv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Start with a getpid() function wrapping BPF_FUNC_get_current_pid_tgid,
idea is to mimic the system headers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zo8hv22onidep7tm785dzxfk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduced in:
ad8c0eaa0a ("tty/serial_core: add ISO7816 infrastructure")
Now 'perf trace' will be able to pretty-print the 'cmd' ioctl arg when
used in capable systems with software emitting those commands.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-7bds48dhckfnleie08mit314@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When reporting on 'record' server we try to retrieve/use the mnt
namespace of the profiled tasks. We use following API with cookie to
hold the return namespace, roughly:
nsinfo__mountns_enter(struct nsinfo *nsi, struct nscookie *nc)
setns(newns, 0);
...
new ns related open..
...
nsinfo__mountns_exit(struct nscookie *nc)
setns(nc->oldns)
Once finished we setns to old namespace, which also sets the current
working directory (cwd) to "/", trashing the cwd we had.
This is mostly fine, because we use absolute paths almost everywhere,
but it screws up 'perf diff':
# perf diff
failed to open perf.data: No such file or directory (try 'perf record' first)
...
Adding the current working directory to be part of the cookie and
restoring it in the nsinfo__mountns_exit call.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 843ff37bb5 ("perf symbols: Find symbols in different mount namespace")
Link: http://lkml.kernel.org/r/20181101170001.30019-1-jolsa@kernel.org
[ No need to check for NULL args for free(), use zfree() for struct members ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As the namespace support code will use this, which is not available in
some non _GNU_SOURCE libraries such as Android's bionic used in my
container build tests (r12b and r15c at the moment).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-x56ypm940pwclwu45d7jfj47@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adam reported a record command crash for simple session like:
$ perf record -e cpu-clock ls
with following backtrace:
Program received signal SIGSEGV, Segmentation fault.
3543 ev = event_update_event__new(size + 1, PERF_EVENT_UPDATE__UNIT, evsel->id[0]);
(gdb) bt
#0 perf_event__synthesize_event_update_unit
#1 0x000000000051e469 in perf_event__synthesize_extra_attr
#2 0x00000000004445cb in record__synthesize
#3 0x0000000000444bc5 in __cmd_record
...
We synthesize an update event that needs to touch the evsel id array,
which is not defined at that time. Fix this by forcing the id allocation
for events with their unit defined.
Reflecting possible read_format ID bit in the attr tests.
Reported-by: Yongxin Liu <yongxin.liu@outlook.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adam Lee <leeadamrobert@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201477
Fixes: bfd8f72c27 ("perf record: Synthesize unit/scale/... in event update")
Link: http://lkml.kernel.org/r/20181112130012.5424-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel PT sql viewer: (Adrian Hunter)
- Fall back to /usr/local/lib/libxed.so
- Add Selected branches report
- Add help window
- Fix table find when table re-ordered
Intel PT debug log (Adrian Hunter)
- Add more event information
- Add MTC and CYC timestamps
perf record: (Andi Kleen)
- Support weak groups, just like with 'perf stat'
perf trace: (Arnaldo Carvalho de Melo)
- Start augmenting raw_syscalls:{sys_enter,sys_exit}: goal is to have a
generic, arch independent eBPF kernel component that is programmed with
syscall table details, what to copy, how many bytes, pid, arg filters from the
userspace via eBPF maps by the 'perf trace' tool that continues to use all its
argument beautifiers, just taking advantage of the extra pointer contents.
JVMTI: (Gustavo Romero)
- Fix undefined symbol scnprintf in libperf-jvmti.so
perf top: (Jin Yao)
- Display the LBR stats in callchain entries
perf stat: (Thomas Richter)
- Handle different PMU names with common prefix
arm64: Will (Deacon)
- Fix arm64 tools build failure wrt smp_load_{acquire,release}.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCW+GBMAAKCRCyPKLppCJ+
J5hwAP9+7F2HKvjwHj4g6YeAvCp2WzXbO9UzakfTNtkAwWDZHwD/aN8T8RdgiaCm
FqlDoftwvSQSpbKvaiN7M1GSk14a+AQ=
=gWMp
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-4.20-20181106' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent improvements and fixes from Arnaldo Carvalho de Melo:
Intel PT SQL viewer: (Adrian Hunter)
- Fall back to /usr/local/lib/libxed.so
- Add Selected branches report
- Add help window
- Fix table find when table re-ordered
Intel PT debug log (Adrian Hunter)
- Add more event information
- Add MTC and CYC timestamps
perf record: (Andi Kleen)
- Support weak groups, just like with 'perf stat'
perf trace: (Arnaldo Carvalho de Melo)
- Start augmenting raw_syscalls:{sys_enter,sys_exit}: goal is to have a
generic, arch independent eBPF kernel component that is programmed with
syscall table details, what to copy, how many bytes, pid, arg filters from the
userspace via eBPF maps by the 'perf trace' tool that continues to use all its
argument beautifiers, just taking advantage of the extra pointer contents.
JVMTI: (Gustavo Romero)
- Fix undefined symbol scnprintf in libperf-jvmti.so
perf top: (Jin Yao)
- Display the LBR stats in callchain entries
perf stat: (Thomas Richter)
- Handle different PMU names with common prefix
arm64: Will (Deacon)
- Fix arm64 tools build failure wrt smp_load_{acquire,release}.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andi reported following malfunction:
# perf record -e '{ref-cycles,cycles}:S' -a sleep 1
# perf script
non matching sample_id_all
That's because we disable sample_id_all bit for non-sampling group
members. We can't do that, because it needs to be the same over the
whole event list. This patch keeps it untouched again.
Reported-by: Andi Kleen <andi@firstfloor.org>
Tested-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180923150420.27327-1-jolsa@kernel.org
Fixes: e9add8bac6 ("perf evsel: Disable write_backward for leader sampling group events")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is the commit that porting the perf for nds32.
1.Raw event:
The raw events start with 'r'.
Usage:
perf stat -e rXYZ ./app
X: the index of performance counter.
YZ: the index(convert to hexdecimal) of events
Example:
'perf stat -e r101 ./app' means the counter 1 will count the instruction
event.
The index of counter and events can be found in
"Andes System Privilege Architecture Version 3 Manual".
Or you can perform the 'perf list' to find the symbolic name of raw events.
2.Perf mmap2:
Fix unexpected perf mmap2() page fault
When the mmap2() called by perf application,
you will encounter such condition:"failed to write."
With return value -EFAULT
This is due to the page fault caused by "reading" buffer
from the mapped legal address region to write to the descriptor.
The page_fault handler will get a VM_FAULT_SIGBUS return value,
which should not happens here.(Due to this is a read request.)
You can refer to kernel/events/core.c:perf_mmap_fault(...)
If "(vmf->pgoff && (vmf->flags & FAULT_FLAG_WRITE))" is evaluated
as true, you will get VM_FAULT_SIGBUS as return value.
However, this is not an write request. The flags which indicated
why the page fault happens is wrong.
Furthermore, NDS32 SPAv3 is not able to detect it is read or write.
It only know either it is instruction fetch or data access.
Therefore, by removing the wrong flag assignment(actually, the hardware
is not able to show the reason), we can fix this bug.
3.Perf multiple events map to same counter.
When there are multiple events map to the same counter, the counter
counts inaccurately. This is because each counter only counts one event
in the same time.
So when there are multiple events map to same counter, they have to take
turns in each context.
There are two solution:
1. Print the error message when multiple events map to the same counter.
But print the error message would let the program hang in loop. The ltp
(linux test program) would be failed when the program hang in loop.
2. Don't print the error message, the ltp would pass. But the user need to
have the knowledge that don't count the events which map to the same
counter, or the user will get the inaccurate results.
We choose method 2 for the solution
Signed-off-by: Nickhu <nickhu@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Currently jvmti agent can not be used because function scnprintf is not
present in the agent libperf-jvmti.so. As a result the JVM when using
such agent to record JITed code profiling information will fail on
looking up scnprintf:
java: symbol lookup error: lib/libperf-jvmti.so: undefined symbol: scnprintf
This commit fixes that by reverting to the use of snprintf, that can be
looked up, instead of scnprintf, adding a proper check for the returned
value in order to print a better error message when the jitdump file
pathname is too long. Checking the returned value also helps to comply
with some recent gcc versions, like gcc8, which will fail due to
truncated writing checks related to the -Werror=format-truncation= flag.
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 1541117601-18937-2-git-send-email-gromero@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-mvpxxxy7wnzaj74cq75muw3f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Guenter reported that using ARCH=x86_64 to build perf has regressed:
$ make -C tools/perf O=/tmp/build/perf ARCH=x86_64
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j4' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
... bpf: [ on ]
GEN /tmp/build/perf/common-cmds.h
make[2]: *** No rule to make target '/home/acme/git/perf/tools/arch/x86_64/include/uapi/asm//mman.h', needed by '/tmp/build/perf/trace/beauty/generated/mmap_flags_array.c'. Stop.
make[2]: *** Waiting for unfinished jobs....
PERF_VERSION = 4.19.gf6c23e3
make[1]: *** [Makefile.perf:207: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
This is because we must use $(SRCARCH) where we were using $(ARCH), so
that, just like the top level Makefile, we get this done:
# Additional ARCH settings for x86
ifeq ($(ARCH),i386)
SRCARCH := x86
endif
ifeq ($(ARCH),x86_64)
SRCARCH := x86
endif
Which is done in tools/scripts/Makefile.arch, so switch to use
$(SRCARCH).
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: fbd7458db7 ("perf beauty: Wire up the mmap flags table generator to the Makefile")
Link: https://lkml.kernel.org/r/20181105184612.GD7077@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One cause of decoding errors is un-synchronized side-band data.
Timestamps are needed to debug such cases. TSC packet timestamps are
logged. Log also MTC and CYC timestamps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/20181105073505.8129-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Table rows can be re-ordered by selecting a column to sort by. After
re-ordering, the "find" operation was highlighting the wrong row, fix
it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181104151238.15947-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a window to display help. It is also possible to display the help
only, by using the option "--help-only" instead of a database name.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181104151238.15947-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fetching data from the database can be slow. Add a report that provides
the ability to select a subset of branches.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181104151238.15947-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fall back to /usr/local/lib/libxed.so to cater for distributions that do
not have /usr/local/lib in the library path by default.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181104151238.15947-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390 the CPU Measurement Facility for counters now supports
2 PMUs named cpum_cf (CPU Measurement Facility for counters) and
cpum_cf_diag (CPU Measurement Facility for diagnostic counters)
for one and the same CPU.
Running command
[root@s35lp76 perf]# ./perf stat -e tx_c_tend \
-- ~/mytests/cf-tx-events 1
Measuring transactions
TX_C_TABORT_NO_SPECIAL: 0 expected:0
TX_C_TABORT_SPECIAL: 0 expected:0
TX_C_TEND: 1 expected:1
TX_NC_TABORT: 11 expected:11
TX_NC_TEND: 1 expected:1
Performance counter stats for '/root/mytests/cf-tx-events 1':
2 tx_c_tend
0.002120091 seconds time elapsed
0.000121000 seconds user
0.002127000 seconds sys
[root@s35lp76 perf]#
displays output which is unexpected (and wrong):
2 tx_c_tend
The test program definitely triggers only one transaction, as shown
in line 'TX_C_TEND: 1 expected:1'.
This is caused by the following call sequence:
pmu_lookup() scans and installs a PMU.
+--> pmu_aliases() parses all aliases in directory
.../<pmu-name>/events/* which are file names.
+--> pmu_aliases_parse() Read each file in directory and create
an new alias entry. This is done with
+--> perf_pmu__new_alias() and
+--> __perf_pmu__new_alias() which also check for
identical alias names.
After pmu_aliases() returns, a complete list of event names
for this pmu has been created. Now function
pmu_add_cpu_aliases() is called to add the events listed in the json
| files to the alias list of the cpu.
+--> perf_pmu__find_map() Returns a pointer to the json events.
Now function pmu_add_cpu_aliases() scans through all events listed
in the JSON files for this CPU.
Each json event pmu name is compared with the current PMU being
built up and if they mismatch, the json event is added to the
current PMUs alias list.
To avoid duplicate entries the following comparison is done:
if (!is_arm_pmu_core(name)) {
pname = pe->pmu ? pe->pmu : "cpu";
if (strncmp(pname, name, strlen(pname)))
continue;
}
The culprit is the strncmp() function.
Using current s390 PMU naming, the first PMU is 'cpum_cf'
and a long list of events is added, among them 'tx_c_tend'
When the second PMU named 'cpum_cf_diag' is added, only one event
named 'CF_DIAG' is added by the pmu_aliases() function.
Now function pmu_add_cpu_aliases() is invoked for PMU 'cpum_cf_diag'.
Since the CPUID string is the same for both PMUs, json file events
for PMU named 'cpum_cf' are added to the PMU 'cpm_cf_diag'
This happens because the strncmp() actually compares:
strncmp("cpum_cf", "cpum_cf_diag", 6);
The first parameter is the pmu name taken from the event in
the json file. The second parameter is the pmu name of the PMU
currently being built.
They are different, but the length of the compare only tests the
common prefix and this returns 0(true) when it should return false.
Now all events for PMU cpum_cf are added to the alias list for pmu
cpum_cf_diag.
Later on in function parse_events_add_pmu() the event 'tx_c_end' is
searched in all available PMUs and found twice, adding it two
times to the evsel_list global variable which is the root
of all events. This results in a counter value of 2 instead
of 1.
Output with this patch:
[root@s35lp76 perf]# ./perf stat -e tx_c_tend \
-- ~/mytests/cf-tx-events 1
Measuring transactions
TX_C_TABORT_NO_SPECIAL: 0 expected:0
TX_C_TABORT_SPECIAL: 0 expected:0
TX_C_TEND: 1 expected:1
TX_NC_TABORT: 11 expected:11
TX_NC_TEND: 1 expected:1
Performance counter stats for '/root/mytests/cf-tx-events 1':
1 tx_c_tend
0.001815365 seconds time elapsed
0.000123000 seconds user
0.001756000 seconds sys
[root@s35lp76 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Sebastien Boisvert <sboisvert@gydle.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 292c34c102 ("perf pmu: Fix core PMU alias list for X86 platform")
Link: http://lkml.kernel.org/r/20181023151616.78193-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement a weak group fallback for 'perf record', similar to the
existing 'perf stat' support. This allows to use groups that might be
longer than the available counters without failing.
Before:
$ perf record -e '{cycles,cache-misses,cache-references,cpu_clk_unhalted.thread,cycles,cycles,cycles}' -a sleep 1
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cycles).
/bin/dmesg | grep -i perf may provide additional information.
After:
$ ./perf record -e '{cycles,cache-misses,cache-references,cpu_clk_unhalted.thread,cycles,cycles,cycles}:W' -a sleep 1
WARNING: No sample_id_all support, falling back to unordered processing
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 8.136 MB perf.data (134069 samples) ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181001195927.14211-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Move the function from builtin-stat to evlist for reuse
- Rename to evlist to match purpose better
- Pass the evlist as first argument.
- No functional changes
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181001195927.14211-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is the start of having the raw_syscalls:sys_enter BPF handler
collecting pointer arguments, namely pathnames, and with two syscalls
that have that pointer in different arguments, "open" as it as its first
argument, "openat" as the second.
With this in place the existing beautifiers in 'perf trace' works, those
args are shown instead of just the pointer that comes with the syscalls
tracepoints.
This also serves to show and document pitfalls in the process of using
just that place in the kernel (raw_syscalls:sys_enter) plus tables
provided by userspace to collect syscall pointer arguments.
One is the need to use a barrier, as suggested by Edward, to avoid clang
optimizations that make the kernel BPF verifier to refuse loading our
pointer contents collector.
The end result should be a generic eBPF program that works in all
architectures, with the differences amongst archs resolved by the
userspace component, 'perf trace', that should get all its tables
created automatically from the kernel components where they are defined,
via string table constructors for things not expressed in BTF/DWARF
(enums, structs, etc), and otherwise using those observability files
(BTF).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-37dz54pmotgpnwg9tb6zuk9j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf updates and fixes from Ingo Molnar:
"These are almost all tooling updates: 'perf top', 'perf trace' and
'perf script' fixes and updates, an UAPI header sync with the merge
window versions, license marker updates, much improved Sparc support
from David Miller, and a number of fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (66 commits)
perf intel-pt/bts: Calculate cpumode for synthesized samples
perf intel-pt: Insert callchain context into synthesized callchains
perf tools: Don't clone maps from parent when synthesizing forks
perf top: Start display thread earlier
tools headers uapi: Update linux/if_link.h header copy
tools headers uapi: Update linux/netlink.h header copy
tools headers: Sync the various kvm.h header copies
tools include uapi: Update linux/mmap.h copy
perf trace beauty: Use the mmap flags table generated from headers
perf beauty: Wire up the mmap flags table generator to the Makefile
perf beauty: Add a generator for MAP_ mmap's flag constants
tools include uapi: Update asound.h copy
tools arch uapi: Update asm-generic/unistd.h and arm64 unistd.h copies
tools include uapi: Update linux/fs.h copy
perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc}
perf cs-etm: Correct CPU mode for samples
perf unwind: Take pgoff into account when reporting elf to libdwfl
perf top: Do not use overwrite mode by default
perf top: Allow disabling the overwrite mode
perf trace: Beautify mount's first pathname arg
...
For now with BPF raw_augmented we hook into raw_syscalls:sys_enter and
there we get all 6 syscall args plus the tracepoint common fields
(sizeof(long)) and the syscall_nr (another long). So we check if that is
the case and if so don't look after the sc->args_size, but always after
the full raw_syscalls:sys_enter payload, which is fixed.
We'll revisit this later to pass s->args_size to the BPF augmenter (now
tools/perf/examples/bpf/augmented_raw_syscalls.c, so that it copies only
what we need for each syscall, like what happens when we use
syscalls:sys_enter_NAME, so that we reduce the kernel/userspace traffic
to just what is needed for each syscall.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-nlslrg8apxdsobt4pwl3n7ur@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the absence of a fallback, samples must provide a correct cpumode for
the 'ip'. Do that now there is no fallback.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org # 4.19
Link: http://lkml.kernel.org/r/20181031091043.23465-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the absence of a fallback, callchains must encode also the callchain
context. Do that now there is no fallback.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org # 4.19
Link: http://lkml.kernel.org/r/100ea2ec-ed14-b56d-d810-e0a6d2f4b069@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When synthesizing FORK events, we are trying to create thread objects
for the already running tasks on the machine.
Normally, for a kernel FORK event, we want to clone the parent's maps
because that is what the kernel just did.
But when synthesizing, this should not be done. If we do, we end up
with overlapping maps as we process the sythesized MMAP2 events that
get delivered shortly thereafter.
Use the FORK event misc flags in an internal way to signal this
situation, so we can elide the map clone when appropriate.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Link: http://lkml.kernel.org/r/20181030.222404.2085088822877051075.davem@davemloft.net
[ Added comment about flag use in machine__process_fork_event(),
use ternary op in thread__clone_map_groups() as suggested by Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If events are coming in at a rate such that the event processing thread
can barely keep up, our initial run of the event ring will almost never
terminate and this delays the starting of the display thread.
The screen basically stays black until the event thread can get out of
it's endless loop.
Therefore, start the display thread before we start processing the ring
buffer.
This also make sure that we always have the user requested real time
setting engaged when processing the ring.
Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181030.223003.2242527041807905962.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan