This adds the DSA driver for the GSWIP Switch found in the VRX200 SoC.
This switch is integrated in the DSL SoC, this SoC uses a GSWIP version
2.1, there are other SoCs using different versions of this IP block, but
this driver was only tested with the version found in the VRX200.
Currently only the basic features are implemented which will forward all
packages to the CPU and let the CPU do the forwarding. The hardware also
support Layer 2 offloading which is not yet implemented in this driver.
The GPHY FW loaded is now done by this driver and not any more by the
separate driver in drivers/soc/lantiq/gphy.c, I will remove this driver
is a separate patch. to make use of the GPHY this switch driver is
needed anyway. Other SoCs have more embedded GPHYs so this driver should
support a variable number of GPHYs. After the firmware was loaded the
GPHY can be probed on the MDIO bus and it behaves like an external GPHY,
without the firmware it can not be probed on the MDIO bus.
The clock names in the sysctrl.c file have to be changed because the
clocks are now used by a different driver. This should be cleaned up and
a real common clock driver should provide the clocks instead.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This drives the PMAC between the GSWIP Switch and the CPU in the VRX200
SoC. This is currently only the very basic version of the Ethernet
driver.
When the DMA channel is activated we receive some packets which were
send to the SoC while it was still in U-Boot, these packets have the
wrong header. Resetting the IP cores did not work so we read out the
extra packets at the beginning and discard them.
This also adapts the clock code in sysctrl.c to use the default name of
the device node so that the driver gets the correct clock. sysctrl.c
should be replaced with a proper common clock driver later.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a DMA channel is opened the IRQ should not get activated
automatically, this allows it to pull data out manually without the help
of interrupts. This is needed for a workaround in the vrx200 Ethernet
driver.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix up several Kconfig dependencies in netfilter, from Martin Willi
and Florian Westphal.
2) Memory leak in be2net driver, from Petr Oros.
3) Memory leak in E-Switch handling of mlx5 driver, from Raed Salem.
4) mlx5_attach_interface needs to check for errors, from Huy Nguyen.
5) tipc_release() needs to orphan the sock, from Cong Wang.
6) Need to program TxConfig register after TX/RX is enabled in r8169
driver, not beforehand, from Maciej S. Szmigiero.
7) Handle 64K PAGE_SIZE properly in ena driver, from Netanel Belgazal.
8) Fix crash regression in ip_do_fragment(), from Taehee Yoo.
9) syzbot can create conditions where kernel log is flooded with
synflood warnings due to creation of many listening sockets, fix
that. From Willem de Bruijn.
10) Fix RCU issues in rds socket layer, from Cong Wang.
11) Fix vlan matching in nfp driver, from Pieter Jansen van Vuuren.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
nfp: flower: reject tunnel encap with ipv6 outer headers for offloading
nfp: flower: fix vlan match by checking both vlan id and vlan pcp
tipc: check return value of __tipc_dump_start()
s390/qeth: don't dump past end of unknown HW header
s390/qeth: use vzalloc for QUERY OAT buffer
s390/qeth: switch on SG by default for IQD devices
s390/qeth: indicate error when netdev allocation fails
rds: fix two RCU related problems
r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED
erspan: fix error handling for erspan tunnel
erspan: return PACKET_REJECT when the appropriate tunnel is not found
tcp: rate limit synflood warnings further
MIPS: lantiq: dma: add dev pointer
netfilter: xt_hashlimit: use s->file instead of s->private
netfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEAT
netfilter: cttimeout: ctnl_timeout_find_get() returns incorrect pointer to type
netfilter: conntrack: timeout interface depend on CONFIG_NF_CONNTRACK_TIMEOUT
netfilter: conntrack: reset tcp maxwin on re-register
qmi_wwan: Support dynamic config on Quectel EP06
ethernet: renesas: convert to SPDX identifiers
...
Commit eeb89e2bb1 ("x86/efi: Load fixmap GDT in efi_call_phys_epilog()")
moved loading the fixmap in efi_call_phys_epilog() after load_cr3() since
it was assumed to be more logical.
Turns out this is incorrect: In efi_call_phys_prolog(), the gdt with its
physical address is loaded first, and when the %cr3 is reloaded in _epilog
from initial_page_table to swapper_pg_dir again the gdt is no longer
mapped. This results in a triple fault if an interrupt occurs after
load_cr3() and before load_fixmap_gdt(0). Calling load_fixmap_gdt(0) first
restores the execution order prior to commit eeb89e2bb1 and fixes the
problem.
Fixes: eeb89e2bb1 ("x86/efi: Load fixmap GDT in efi_call_phys_epilog()")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: linux-efi@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/1536689892-21538-1-git-send-email-linux@roeck-us.net
This tag contains what I hope to be the last RISC-V patch for 4.19. It
fixes a bug in our initramfs support by removing some broken and
obselete code.
-----BEGIN PGP SIGNATURE-----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=XdJZ
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V fix from Palmer Dabbelt:
"This contains what I hope to be the last RISC-V patch for 4.19.
It fixes a bug in our initramfs support by removing some broken and
obselete code"
* tag 'riscv-for-linus-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
riscv: Do not overwrite initrd_start and initrd_end
We currently do not notify all gmaps when using gmap_pmdp_xchg(), due
to locking constraints. This makes ucontrol VMs, which is the only VM
type that creates multiple gmaps, incompatible with huge pages. Also
we would need to hold the guest_table_lock of all gmaps that have this
vmaddr maped to synchronize access to the pmd.
ucontrol VMs are rather exotic and creating a new locking concept is
no easy task. Hence we return EINVAL when trying to active
KVM_CAP_S390_HPAGE_1M and report it as being not available when
checking for it.
Fixes: a4499382 ("KVM: s390: Add huge page enablement control")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20180801112508.138159-1-frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Userspace could have munmapped the area before doing unmapping from
the gmap. This would leave us with a valid vmaddr, but an invalid vma
from which we would try to zap memory.
Let's check before using the vma.
Fixes: 1e133ab296 ("s390/mm: split arch/s390/mm/pgtable.c")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <20180816082432.78828-1-frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
dma_zalloc_coherent() now crashes if no dev pointer is given.
Add a dev pointer to the ltq_dma_channel structure and fill it in the
driver using it.
This fixes a bug introduced in kernel 4.19.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
You can always prefix variant/platform header search paths with
$(srctree)/ because $(srctree) is '.' for in-tree building.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
THP paths can defer splitting compound pages until after the actual
remap and TLB flushes to split a huge PMD/PUD. This causes radix
partition scope page table mappings to get out of synch with the host
qemu page table mappings.
This results in random memory corruption in the guest when running
with THP. The easiest way to reproduce is use KVM balloon to free up
a lot of memory in the guest and then shrink the balloon to give the
memory back, while some work is being done in the guest.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: kvm-ppc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
At the moment the real mode handler of H_PUT_TCE calls iommu_tce_xchg_rm()
which in turn reads the old TCE and if it was a valid entry, marks
the physical page dirty if it was mapped for writing. Since it is in
real mode, realmode_pfn_to_page() is used instead of pfn_to_page()
to get the page struct. However SetPageDirty() itself reads the compound
page head and returns a virtual address for the head page struct and
setting dirty bit for that kills the system.
This adds additional dirty bit tracking into the MM/IOMMU API for use
in the real mode. Note that this does not change how VFIO and
KVM (in virtual mode) set this bit. The KVM (real mode) changes include:
- use the lowest bit of the cached host phys address to carry
the dirty bit;
- mark pages dirty when they are unpinned which happens when
the preregistered memory is released which always happens in virtual
mode;
- add mm_iommu_ua_mark_dirty_rm() helper to set delayed dirty bit;
- change iommu_tce_xchg_rm() to take the kvm struct for the mm to use
in the new mm_iommu_ua_mark_dirty_rm() helper;
- move iommu_tce_xchg_rm() to book3s_64_vio_hv.c (which is the only
caller anyway) to reduce the real mode KVM and IOMMU knowledge
across different subsystems.
This removes realmode_pfn_to_page() as it is not used anymore.
While we at it, remove some EXPORT_SYMBOL_GPL() as that code is for
the real mode only and modules cannot call it anyway.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Since commit 23c85094fe ("proc/kcore: add vmcoreinfo note to /proc/kcore")
the kernel has exported the vmcoreinfo PT_NOTE on /proc/kcore as well
as /proc/vmcore.
arm64 only exposes it's additional arch information via
arch_crash_save_vmcoreinfo() if built with CONFIG_KEXEC, as kdump was
previously the only user of vmcoreinfo.
Move this weak function to a separate file that is built at the same
time as its caller in kernel/crash_core.c. This ensures values like
'kimage_voffset' are always present in the vmcoreinfo PT_NOTE.
CC: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
All other uses of "asm goto" go through asm_volatile_goto, which avoids
a miscompile when using GCC < 4.8.2. Replace our open-coded "asm goto"
statements with the asm_volatile_goto macro to avoid issues with older
toolchains.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Building drivers/mtd/nand/raw/nandsim.c on arch/hexagon/ produces a
printk format build warning. This is due to hexagon's ffs() being
coded as returning long instead of int.
Fix the printk format warning by changing all of hexagon's ffs() and
fls() functions to return int instead of long. The variables that
they return are already int instead of long. This return type
matches the return type in <asm-generic/bitops/>.
../drivers/mtd/nand/raw/nandsim.c: In function 'init_nandsim':
../drivers/mtd/nand/raw/nandsim.c:760:2: warning: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'long int' [-Wformat]
There are no ffs() or fls() allmodconfig build errors after making this
change.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-hexagon@vger.kernel.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Patch-mainline: linux-kernel @ 07/22/2018, 16:03
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Fix build warning in arch/hexagon/kernel/dma.c by casting a void *
to unsigned long to match the function parameter type.
../arch/hexagon/kernel/dma.c: In function 'arch_dma_alloc':
../arch/hexagon/kernel/dma.c:51:5: warning: passing argument 2 of 'gen_pool_add' makes integer from pointer without a cast [enabled by default]
../include/linux/genalloc.h:112:19: note: expected 'long unsigned int' but argument is of type 'void *'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Patch-mainline: linux-kernel @ 07/20/2018, 20:17
[rkuo@codeaurora.org: fixed architecture name]
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Problem: perf did not show branch predicted/mispredicted bit in brstack.
Output of perf -F brstack for profile collected
Before:
0x4fdbcd/0x4fdc03/-/-/-/0
0x45f4c1/0x4fdba0/-/-/-/0
0x45f544/0x45f4bb/-/-/-/0
0x45f555/0x45f53c/-/-/-/0
0x7f66901cc24b/0x45f555/-/-/-/0
0x7f66901cc22e/0x7f66901cc23d/-/-/-/0
0x7f66901cc1ff/0x7f66901cc20f/-/-/-/0
0x7f66901cc1e8/0x7f66901cc1fc/-/-/-/0
After:
0x4fdbcd/0x4fdc03/P/-/-/0
0x45f4c1/0x4fdba0/P/-/-/0
0x45f544/0x45f4bb/P/-/-/0
0x45f555/0x45f53c/P/-/-/0
0x7f66901cc24b/0x45f555/P/-/-/0
0x7f66901cc22e/0x7f66901cc23d/P/-/-/0
0x7f66901cc1ff/0x7f66901cc20f/P/-/-/0
0x7f66901cc1e8/0x7f66901cc1fc/P/-/-/0
Cause:
As mentioned in Software Development Manual vol 3, 17.4.8.1,
IA32_PERF_CAPABILITIES[5:0] indicates the format of the address that is
stored in the LBR stack. Knights Landing reports 1 (LBR_FORMAT_LIP) as
its format. Despite that, registers containing FROM address of the branch,
do have MISPREDICT bit but because of the format indicated in
IA32_PERF_CAPABILITIES[5:0], LBR did not read MISPREDICT bit.
Solution:
Teach LBR about above Knights Landing quirk and make it read MISPREDICT bit.
Signed-off-by: Jacek Tomaka <jacek.tomaka@poczta.fm>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180802013830.10600-1-jacekt@dugeo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Prevent multiplication result truncation on 32bit. Introduced with
the early timestamp reworrk.
- Ensure microcode revision storage to be consistent under all
circumstances
- Prevent write tearing of PTEs
- Prevent confusion of user and kernel reegisters when dumping fatal
signals verbosely
- Make an error return value in a failure path of the vector
allocation negative. Returning EINVAL might the caller assume
success and causes further wreckage.
- A trivial kernel doc warning fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Use WRITE_ONCE() when setting PTEs
x86/apic/vector: Make error return value negative
x86/process: Don't mix user/kernel regs in 64bit __show_regs()
x86/tsc: Prevent result truncation on 32bit
x86: Fix kernel-doc atomic.h warnings
x86/microcode: Update the new microcode revision unconditionally
x86/microcode: Make sure boot_cpu_data.microcode is up-to-date
ARM:
- Fix a VFP corruption in 32-bit guest
- Add missing cache invalidation for CoW pages
- Two small cleanups
s390:
- Fallout from the hugetlbfs support: pfmf interpretion and locking
- VSIE: fix keywrapping for nested guests
PPC:
- Fix a bug where pages might not get marked dirty, causing
guest memory corruption on migration,
- Fix a bug causing reads from guest memory to use the wrong guest
real address for very large HPT guests (>256G of memory), leading to
failures in instruction emulation.
x86:
- Fix out of bound access from malicious pv ipi hypercalls (introduced
in rc1)
- Fix delivery of pending interrupts when entering a nested guest,
preventing arbitrarily late injection
- Sanitize kvm_stat output after destroying a guest
- Fix infinite loop when emulating a nested guest page fault
and improve the surrounding emulation code
- Two minor cleanups
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJbk5gAAAoJEED/6hsPKofoS0UH/1clCzg/8x3jhpDcKKp6tDm7
9XHOOQ6XmydT0HXYJNqZepGNqU99ip+2u4x8E9LCT5MTvTMZ1BcNM6PmenjJVULY
GMJtwZhjqoklrOcNkXGqIye4Ec+I0pBuMmt0AN0N85CcHO8VUBpMzsdxgJLuxcRm
UT6OZnCLyJsock6BqkZmqVsJj/gemFnI9MpudnrU8cCFk60roXmQWJ66fMIFfKjt
q0R61t8nmbapQKE8pjqBNgbCsuotVOtU1zgMkeM5LkaYEfc65ZPdgt3sdpyG8Guq
WA7Vt6HEvmNrcQxHFX5P0GxTVM9lOVCUx1bKXE4+57CMZOYl/8hDaTudlcacutg=
=FyuN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- Fix a VFP corruption in 32-bit guest
- Add missing cache invalidation for CoW pages
- Two small cleanups
s390:
- Fallout from the hugetlbfs support: pfmf interpretion and locking
- VSIE: fix keywrapping for nested guests
PPC:
- Fix a bug where pages might not get marked dirty, causing guest
memory corruption on migration
- Fix a bug causing reads from guest memory to use the wrong guest
real address for very large HPT guests (>256G of memory), leading
to failures in instruction emulation.
x86:
- Fix out of bound access from malicious pv ipi hypercalls
(introduced in rc1)
- Fix delivery of pending interrupts when entering a nested guest,
preventing arbitrarily late injection
- Sanitize kvm_stat output after destroying a guest
- Fix infinite loop when emulating a nested guest page fault and
improve the surrounding emulation code
- Two minor cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
KVM: LAPIC: Fix pv ipis out-of-bounds access
KVM: nVMX: Fix loss of pending IRQ/NMI before entering L2
arm64: KVM: Remove pgd_lock
KVM: Remove obsolete kvm_unmap_hva notifier backend
arm64: KVM: Only force FPEXC32_EL2.EN if trapping FPSIMD
KVM: arm/arm64: Clean dcache to PoC when changing PTE due to CoW
KVM: s390: Properly lock mm context allow_gmap_hpage_1m setting
KVM: s390: vsie: copy wrapping keys to right place
KVM: s390: Fix pfmf and conditional skey emulation
tools/kvm_stat: re-animate display of dead guests
tools/kvm_stat: indicate dead guests as such
tools/kvm_stat: handle guest removals more gracefully
tools/kvm_stat: don't reset stats when setting PID filter for debugfs
tools/kvm_stat: fix updates for dead guests
tools/kvm_stat: fix handling of invalid paths in debugfs provider
tools/kvm_stat: fix python3 issues
KVM: x86: Unexport x86_emulate_instruction()
KVM: x86: Rename emulate_instruction() to kvm_emulate_instruction()
KVM: x86: Do not re-{try,execute} after failed emulation in L2
KVM: x86: Default to not allowing emulation retry in kvm_mmu_page_fault
...
A few more fixes who have trickled in:
- MMC bus width fixup for some Allwinner platforms
- Fix for NULL deref in ti-aemif when no platform data is passed in
- Fix div by 0 in SCMI code
- Add a missing module alias in a new RPi driver
-----BEGIN PGP SIGNATURE-----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=oZbn
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A few more fixes who have trickled in:
- MMC bus width fixup for some Allwinner platforms
- Fix for NULL deref in ti-aemif when no platform data is passed in
- Fix div by 0 in SCMI code
- Add a missing module alias in a new RPi driver"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
memory: ti-aemif: fix a potential NULL-pointer dereference
firmware: arm_scmi: fix divide by zero when sustained_perf_level is zero
hwmon: rpi: add module alias to raspberrypi-hwmon
arm64: allwinner: dts: h6: fix Pine H64 MMC bus width
Just one fix for H6 mmc on the Pine H64: the mmc bus width was missing
from the device tree. This was added in 4.19-rc1.
-----BEGIN PGP SIGNATURE-----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=WbHO
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Allwinner fixes for 4.19
Just one fix for H6 mmc on the Pine H64: the mmc bus width was missing
from the device tree. This was added in 4.19-rc1.
* tag 'sunxi-fixes-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: dts: h6: fix Pine H64 MMC bus width
Signed-off-by: Olof Johansson <olof@lixom.net>
When page-table entries are set, the compiler might optimize their
assignment by using multiple instructions to set the PTE. This might
turn into a security hazard if the user somehow manages to use the
interim PTE. L1TF does not make our lives easier, making even an interim
non-present PTE a security hazard.
Using WRITE_ONCE() to set PTEs and friends should prevent this potential
security hazard.
I skimmed the differences in the binary with and without this patch. The
differences are (obviously) greater when CONFIG_PARAVIRT=n as more
code optimizations are possible. For better and worse, the impact on the
binary with this patch is pretty small. Skimming the code did not cause
anything to jump out as a security hazard, but it seems that at least
move_soft_dirty_pte() caused set_pte_at() to use multiple writes.
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180902181451.80520-1-namit@vmware.com
activate_managed() returns EINVAL instead of -EINVAL in case of
error. While this is unlikely to happen, the positive return value would
cause further malfunction at the call site.
Fixes: 2db1f959d9 ("x86/vector: Handle managed interrupts proper")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
- Remove accidental VM_WARN_ON
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJbkorgAAoJELescNyEwWM0my8IAKsVsc5heKBeL/0Ep5gfXJLS
H3kjkToFKfOeVADLfZXfTkPzlx9f1NrEP4+b/hQYgqGqXQcvCIwEXzpTMFg4pT4/
ERhYtq9qYBNQmg4AZnTHl2cKSRFt+s7knTZMoTEwNk1NxdBQAtbIZa9HB9Ly2mSn
xK6UP7zsZvRcY02BlyDQ0A/QBjzQAi3I83FRLizxjPYaSUhF0QqhrzTr0ANoKEjv
DnX04nJEMYqLEjSKWTn3rzot2PgLVDcMEjXKwMB3XB6LML3KLRUsvnTpxED5c+dW
tv+wzKKdaFeHWmfFxUgYZXSd4igh0IKf3OZDohRKz+lNOhKrTYUE35dtFyyw04I=
=xYN8
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"Just one small fix here, preventing a VM_WARN_ON when a !present
PMD/PUD is "freed" as part of a huge ioremap() operation.
The correct behaviour is to skip the free silently in this case, which
is a little weird (the function is a bit of a misnomer), but it
follows the x86 implementation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: fix erroneous warnings in page freeing functions
Dan Carpenter reported that the untrusted data returns from kvm_register_read()
results in the following static checker warning:
arch/x86/kvm/lapic.c:576 kvm_pv_send_ipi()
error: buffer underflow 'map->phys_map' 's32min-s32max'
KVM guest can easily trigger this by executing the following assembly sequence
in Ring0:
mov $10, %rax
mov $0xFFFFFFFF, %rbx
mov $0xFFFFFFFF, %rdx
mov $0, %rsi
vmcall
As this will cause KVM to execute the following code-path:
vmx_handle_exit() -> handle_vmcall() -> kvm_emulate_hypercall() -> kvm_pv_send_ipi()
which will reach out-of-bounds access.
This patch fixes it by adding a check to kvm_pv_send_ipi() against map->max_apic_id,
ignoring destinations that are not present and delivering the rest. We also check
whether or not map->phys_map[min + i] is NULL since the max_apic_id is set to the
max apic id, some phys_map maybe NULL when apic id is sparse, especially kvm
unconditionally set max_apic_id to 255 to reserve enough space for any xAPIC ID.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
[Add second "if (min > map->max_apic_id)" to complete the fix. -Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Consider the case L1 had a IRQ/NMI event until it executed
VMLAUNCH/VMRESUME which wasn't delivered because it was disallowed
(e.g. interrupts disabled). When L1 executes VMLAUNCH/VMRESUME,
L0 needs to evaluate if this pending event should cause an exit from
L2 to L1 or delivered directly to L2 (e.g. In case L1 don't intercept
EXTERNAL_INTERRUPT).
Usually this would be handled by L0 requesting a IRQ/NMI window
by setting VMCS accordingly. However, this setting was done on
VMCS01 and now VMCS02 is active instead. Thus, when L1 executes
VMLAUNCH/VMRESUME we force L0 to perform pending event evaluation by
requesting a KVM_REQ_EVENT.
Note that above scenario exists when L1 KVM is about to enter L2 but
requests an "immediate-exit". As in this case, L1 will
disable-interrupts and then send a self-IPI before entering L2.
Reviewed-by: Nikita Leshchenko <nikita.leshchenko@oracle.com>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
- Fix a VFP corruption in 32-bit guest
- Add missing cache invalidation for CoW pages
- Two small cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbkngmAAoJEEtpOizt6ddyeaoH/15bbGHlwWf23tGjSoDzhyD4
zAXfy+SJdm4cR8K7jEkVrNffkEMAby7Zl28hTHKB9jsY1K8DD+EuCE3Nd4kkVAsc
iHJwV4aiHil/zC5SyE0MqMzELeS8UhsxESYebG6yNF0ElQDQ0SG+QAFr47/OBN9S
u4I7x0rhyJP6Kg8z9U4KtEX0hM6C7VVunGWu44/xZSAecTaMuJnItCIM4UMdEkSs
xpAoI59lwM6BWrXLvEunekAkxEXoR7AVpQER2PDINoLK2I0i0oavhPim9Xdt2ZXs
rqQqfmwmPOVvYbexDp97JtfWo3/psGLqvgoK1tq9bzF3u6Y3ylnUK5IspyVYwuQ=
=TK8A
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-fixes-for-v4.19-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm
Fixes for KVM/ARM for Linux v4.19 v2:
- Fix a VFP corruption in 32-bit guest
- Add missing cache invalidation for CoW pages
- Two small cleanups
The lock has never been used and the page tables are protected by
mmu_lock in struct kvm.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
kvm_unmap_hva is long gone, and we only have kvm_unmap_hva_range to
deal with. Drop the now obsolete code.
Fixes: fb1522e099 ("KVM: update to new mmu_notifier semantic v2")
Cc: James Hogan <jhogan@kernel.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
If trapping FPSIMD in the context of an AArch32 guest, it is critical
to set FPEXC32_EL2.EN to 1 so that the trapping is taken to EL2 and
not EL1.
Conversely, it is just as critical *not* to set FPEXC32_EL2.EN to 1
if we're not going to trap FPSIMD, as we then corrupt the existing
VFP state.
Moving the call to __activate_traps_fpsimd32 to the point where we
know for sure that we are going to trap ensures that we don't set that
bit spuriously.
Fixes: e6b673b741 ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing")
Cc: stable@vger.kernel.org # v4.18
Cc: Dave Martin <dave.martin@arm.com>
Reported-by: Alexander Graf <agraf@suse.de>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Pull m68knommu fix from Greg Ungerer:
"A single change to fix booting on ColdFire platforms that have RAM
starting at a non-0 address"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: fix early memory reservation for ColdFire MMU systems
for systems with dcache aliasing. Those systems could previously observe
stale data, causing clock_gettime() & gettimeofday() to return incorrect
values.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCW5GjkhUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN3LmgEA3bCpFJNpj6Ep4ffwHx6bLOgHzr3T
1CPx6UWPktIBZIgBAMmOWzCC5U/fqp3974lwohEG0orAzOfpuLn6uX9X0m4O
=TEC0
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Paul Burton:
"A single fix for v4.19-rc3, resolving a problem with our VDSO data
page for systems with dcache aliasing. Those systems could previously
observe stale data, causing clock_gettime() & gettimeofday() to return
incorrect values"
* tag 'mips_fixes_4.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: VDSO: Match data page cache colouring when D$ aliases
Memory allocator is not initialized at that point yet, use static array
instead.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In pmd_free_pte_page() and pud_free_pmd_page() we try to warn if they
hit a present non-table entry. In both cases we'll warn for non-present
entries, as the VM_WARN_ON() only checks the entry is not a table entry.
This has been observed to result in warnings when booting a v4.19-rc2
kernel under qemu.
Fix this by bailing out earlier for non-present entries.
Fixes: ec28bb9c9b ("arm64: Implement page table free interfaces")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When the kernel.print-fatal-signals sysctl has been enabled, a simple
userspace crash will cause the kernel to write a crash dump that contains,
among other things, the kernel gsbase into dmesg.
As suggested by Andy, limit output to pt_regs, FS_BASE and KERNEL_GS_BASE
in this case.
This also moves the bitness-specific logic from show_regs() into
process_{32,64}.c.
Fixes: 45807a1df9 ("vdso: print fatal signals")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180831194151.123586-1-jannh@google.com
Loops per jiffy is calculated by multiplying tsc_khz with 1e3 and then
dividing it by HZ.
Both tsc_khz and the temporary variable holding the multiplication result
are of type unsigned long, so on 32bit the result is truncated to the lower
32bit.
Use u64 as type for the temporary variable and cast tsc_khz to it before
multiplying.
[ tglx: Massaged changelog and removed pointless braces ]
Fixes: cf7a63ef4e ("x86/tsc: Calibrate tsc only once")
Signed-off-by: Chuanhua Lei <chuanhua.lei@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: yixin.zhu@linux.intel.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@microsoft.com>
Cc: Rajvi Jingar <rajvi.jingar@intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Link: https://lkml.kernel.org/r/1536228203-18701-1-git-send-email-chuanhua.lei@linux.intel.com
Here is the nds32 patch set based on 4.19-rc2.
Contained in here are the bug fixes, building error fixes and ftrace support
for nds32.
These are the LTP20170427 testing results.
Total Tests: 1902
Total Skipped Tests: 592
Total Failures: 420
Kernel Version: 4.19.0-rc2-00018-g2c9d30cc16f0-dirty
Machine Architecture: nds32
Signed-off-by: Greentime Hu <greentime@andestech.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.17 (GNU/Linux)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=DJCS
-----END PGP SIGNATURE-----
Merge tag 'nds32-for-linus-4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux
Pull nds32 updates from Greentime Hu:
"Contained in here are the bug fixes, building error fixes and ftrace
support for nds32"
* tag 'nds32-for-linus-4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
nds32: linker script: GCOV kernel may refers data in __exit
nds32: fix build error because of wrong semicolon
nds32: Fix a kernel panic issue because of wrong frame pointer access.
nds32: Only print one page of stack when die to prevent printing too much information.
nds32: Add macro definition for offset of lp register on stack
nds32: Remove the deprecated ABI implementation
nds32/stack: Get real return address by using ftrace_graph_ret_addr
nds32/ftrace: Support dynamic function graph tracer
nds32/ftrace: Support dynamic function tracer
nds32/ftrace: Add RECORD_MCOUNT support
nds32/ftrace: Support static function graph tracer
nds32/ftrace: Support static function tracer
nds32: Extract the checking and getting pointer to a macro
nds32: Clean up the coding style
nds32: Fix get_user/put_user macro expand pointer problem
nds32: Fix empty call trace
nds32: add NULL entry to the end of_device_id array
nds32: fix logic for module
This patch is used to fix nds32 allmodconfig/allyesconfig build error
because GCOV kernel embeds counters in the kernel for each line
and a part of that embed in __exit text. So we need to keep the
EXIT_TEXT and EXIT_DATA if CONFIG_GCOV_KERNEL=y.
Link: https://lkml.org/lkml/2018/9/1/125
Signed-off-by: Greentime Hu <greentime@andestech.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
setup_initrd() overwrites initrd_start and initrd_end if __initramfs_size
is larger than 0, which is always true even if there is no embedded
initramfs. This prevents booting qemu with "-initrd" parameter.
Overwriting initrd_start and initrd_end is not necessary since
__initramfs_start and __initramfs_size are used directly in
populate_rootfs() to load the built-in initramfs, so just drop
that code.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
__GFP_HIGHMEM flag is cleared by upper layer functions
(in include/linux/dma-mapping.h) so we'll never get a
__GFP_HIGHMEM flag in arch_dma_alloc gfp argument.
That's why alloc_pages will never return highmem page
here.
Get rid of highmem pages handling and cleanup arch_dma_alloc
and arch_dma_free functions.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
So far the IOC treatment was global on ARC, being turned on (or off)
for all devices in the system. With this patch, this can now be done
per device using the "dma-coherent" DT property; IOW with this patch
we can use both HW-coherent and regular DMA peripherals simultaneously.
The changes involved are too many so enlisting the summary below:
1. common code calls ARC arch_setup_dma_ops() per device.
2. For coherent dma (IOC) it plugs in generic @dma_direct_ops which
doesn't need any arch specific backend: No need for any explicit
cache flushes or MMU mappings to provide for uncached access
- dma_(map|sync)_single* return early as corresponding dma ops callbacks
are NULL in generic code.
So arch_sync_dma_*() -> dma_cache_*() need not handle the coherent
dma case, hence drop ARC __dma_cache_*_ioc() which were no-op anyways
3. For noncoherent dma (non IOC) generic @dma_noncoherent_ops is used
which in turns calls ARC specific routines
- arch_dma_alloc() no longer checks for @ioc_enable since this is
called only for !IOC case.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: rewrote changelog]
Two small fixes for KVM on POWER machines; one fixes a bug where pages
might not get marked dirty, causing guest memory corruption on migration,
and the other fixes a bug causing reads from guest memory to use the
wrong guest real address for very large HPT guests (>256G of memory),
leading to failures in instruction emulation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJbfVFcAAoJEJ2a6ncsY3GfwAcH/i4BDNm5bSXLbCZv1Zqc9iWM
ZqCNSlx9fuR5z+Bl3FWvm14CqfG7JFMd1pVXVD3AEGN6nv0mtLPotmoaw+BUWXIP
aD3BRIBSfOVHj90CiWJ1pqZGzE49vAKrjUGocuqHhBiqGjYmnnE7QKgD+lQ13SND
LWDV3XaQgoO9+NZdqtV6hsWMmKCmXWIHykkG9H+EVkD+341e2EBQf6r83qibAGz4
U5SHkr/3JqL8oC7RJixT8CS/dV5qCgmuL8Vs5NYDTUnc6DmKhdes2s7OiugK7nHg
twKe8K0aRVowmTA8yIwEN22OeH1FAUmYDClkgHozHFWyD2+u7O9kLrAYZxEN9Q4=
=61nR
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-fixes-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
PPC KVM fixes for 4.19
Two small fixes for KVM on POWER machines; one fixes a bug where pages
might not get marked dirty, causing guest memory corruption on migration,
and the other fixes a bug causing reads from guest memory to use the
wrong guest real address for very large HPT guests (>256G of memory),
leading to failures in instruction emulation.
We have to do down_write on the mm semaphore to set a bitfield in the
mm context.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: a4499382 ("KVM: s390: Add huge page enablement control")
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Copy the key mask to the right offset inside the shadow CRYCB
Fixes: bbeaa58b3 ("KVM: s390: vsie: support aes dea wrapping keys")
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Cc: stable@vger.kernel.org # v4.8+
Message-Id: <1535019956-23539-2-git-send-email-pmorel@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We should not return with a lock.
We also have to increase the address when we do page clearing.
Fixes: bd096f6443 ("KVM: s390: Add skey emulation fault handling")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20180830081355.59234-1-frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The return code of cpacf_kmc() is less than the number of
bytes to process in case of an error, not greater.
The crypt routines for the other cipher modes already have
this correctly.
Cc: stable@vger.kernel.org # v4.11+
Fixes: 2793784307 ("s390/crypt: Add protected key AES module")
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
It shall be removed in the define usage. We shall not put a semicolon there.
/kisskb/src/arch/nds32/include/asm/elf.h:126:29: error: expected '}' before ';' token
#define ELF_DATA ELFDATA2LSB;
^
/kisskb/src/fs/proc/kcore.c:318:17: note: in expansion of macro 'ELF_DATA'
[EI_DATA] = ELF_DATA,
^~~~~~~~
/kisskb/src/fs/proc/kcore.c:312:15: note: to match this '{'
.e_ident = {
^
/kisskb/src/scripts/Makefile.build:307: recipe for target 'fs/proc/kcore.o' failed
Signed-off-by: Greentime Hu <greentime@andestech.com>
It may print too much information sometimes if the stack is wrong or
too big. This patch can limit the debug information in a page of stack.
Signed-off-by: Greentime Hu <greentime@andestech.com>
Use macro to replace the magic number.
Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
We are not using NDS32 ABI 2 for now, just remove the preprocessor
directives __NDS32_ABI_2.
Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Function graph tracer has modified the return address to
'return_to_handler' on stack, and provide the 'ftrace_graph_ret_addr' to
get the real return address.
Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
This patch contains the implementation of dynamic function graph tracer.
Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
This patch contains the implementation of dynamic function tracer.
The mcount call is composed of three instructions, so there are three
nop for enough placeholder.
Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Recognize NDS32 object files in recordmcount.pl.
Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
This patch contains implementation of static function graph tracer.
Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
This patch support the static function tracer. On nds32 ABI, we need to
always push return address to stack for __builtin_return_address can
work correctly, otherwise, it will get the wrong value of $lp at leaf
function.
Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
1. Adjust indentation.
2. Unify argument name of each macro.
3. Add space after comma in parameters list.
4. Add space after 'if' keyword.
5. Replace space by tab.
6. Change asm volatile to __asm__ __volatile__
Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
The pointer argument of macro need to be taken out once first, and then
use the new pointer in the macro body.
In kernel/trace/trace.c, get_user(ch, ubuf++) causes the unexpected
increment after expand the macro.
Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
The compiler predefined macro 'NDS32_ABI_2' had been removed, it should
use the '__NDS32_ABI_2' here.
Signed-off-by: Zong Li <zong@andestech.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Make sure of_device_id tables are NULL terminated.
Found by coccinelle spatch "misc/of_table.cocci"
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
This bug is report by Dan Carpenter. We shall use ~loc_mask instead of
!loc_mask because we need to and(&) the bits of ~loc_mask.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: c9a4a8da6b ("nds32: Loadable modules")
Signed-off-by: Greentime Hu <greentime@andestech.com>
Fix kernel-doc warnings in arch/x86/include/asm/atomic.h that are caused by
having a #define macro between the kernel-doc notation and the function
name. Fixed by moving the #define macro to after the function
implementation.
Make the same change for atomic64_{32,64}.h for consistency even though
there were no kernel-doc warnings found in these header files, but there
would be if they were used in generation of documentation.
Fixes these kernel-doc warnings:
../arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'i' description in 'arch_atomic_sub_and_test'
../arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'v' description in 'arch_atomic_sub_and_test'
../arch/x86/include/asm/atomic.h:96: warning: Excess function parameter 'v' description in 'arch_atomic_inc'
../arch/x86/include/asm/atomic.h:109: warning: Excess function parameter 'v' description in 'arch_atomic_dec'
../arch/x86/include/asm/atomic.h:124: warning: Excess function parameter 'v' description in 'arch_atomic_dec_and_test'
../arch/x86/include/asm/atomic.h:138: warning: Excess function parameter 'v' description in 'arch_atomic_inc_and_test'
../arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'i' description in 'arch_atomic_add_negative'
../arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'v' description in 'arch_atomic_add_negative'
Fixes: 18cc1814d4 ("atomics/treewide: Make test ops optional")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/0a1e678d-c8c5-b32c-2640-ed4e94d399d2@infradead.org
A few fixes for the fallout of being a little more pedantic about
dma masks.
-----BEGIN PGP SIGNATURE-----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=GFai
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.19-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"A few fixes for the fallout of being a little more pedantic about dma
masks"
* tag 'dma-mapping-4.19-2' of git://git.infradead.org/users/hch/dma-mapping:
of/platform: initialise AMBA default DMA masks
sparc: set a default 32-bit dma mask for OF devices
kernel/dma/direct: take DMA offset into account in dma_direct_supported
The bootmem to memblock conversion introduced by the commit 1008a11590
("m68k: switch to MEMBLOCK + NO_BOOTMEM") made reservation of kernel code
and data to start from a wrong address.
Fix it.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
First batch of fixes post-merge window:
- A handful of devicetree changes for i.MX2{3,8} to change over to new
panel bindings. The platforms were moved from legacy framebuffers
to DRM and some development board panels hadn't yet been converted.
- OMAP fixes related to ti-sysc driver conversion fallout, fixing some
register offsets, no_console_suspend fixes, etc.
- Droid4 changes to fix flaky eMMC probing and vibrator DTS mismerge.
- Fixed 0755->0644 permissions on a newly added file.
- Defconfig changes to make ARM Versatile more useful with QEMU
(helps testing).
- Enable defconfig options for new TI SoC platform that was merged this
window (AM6).
-----BEGIN PGP SIGNATURE-----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=Pdac
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"First batch of fixes post-merge window:
- A handful of devicetree changes for i.MX2{3,8} to change over to
new panel bindings. The platforms were moved from legacy
framebuffers to DRM and some development board panels hadn't yet
been converted.
- OMAP fixes related to ti-sysc driver conversion fallout, fixing
some register offsets, no_console_suspend fixes, etc.
- Droid4 changes to fix flaky eMMC probing and vibrator DTS mismerge.
- Fixed 0755->0644 permissions on a newly added file.
- Defconfig changes to make ARM Versatile more useful with QEMU
(helps testing).
- Enable defconfig options for new TI SoC platform that was merged
this window (AM6)"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: defconfig: Enable TI's AM6 SoC platform
ARM: defconfig: Update the ARM Versatile defconfig
ARM: dts: omap4-droid4: Fix emmc errors seen on some devices
ARM: dts: Fix file permission for am335x-osd3358-sm-red.dts
ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G
ARM: mxs_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G
ARM: dts: imx23-evk: Convert to the new display bindings
ARM: dts: imx23-evk: Move regulators outside simple-bus
ARM: dts: imx28-evk: Convert to the new display bindings
ARM: dts: imx28-evk: Move regulators outside simple-bus
Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping"
arm: dts: am4372: setup rtc as system-power-controller
ARM: dts: omap4-droid4: fix vibrations on Droid 4
bus: ti-sysc: Fix no_console_suspend handling
bus: ti-sysc: Fix module register ioremap for larger offsets
ARM: OMAP2+: Fix module address for modules using mpu_rt_idx
ARM: OMAP2+: Fix null hwmod for ti-sysc debug
Pull x86 fixes from Thomas Gleixner:
"Speculation:
- Make the microcode check more robust
- Make the L1TF memory limit depend on the internal cache physical
address space and not on the CPUID advertised physical address
space, which might be significantly smaller. This avoids disabling
L1TF on machines which utilize the full physical address space.
- Fix the GDT mapping for EFI calls on 32bit PTI
- Fix the MCE nospec implementation to prevent #GP
Fixes and robustness:
- Use the proper operand order for LSL in the VDSO
- Prevent NMI uaccess race against CR3 switching
- Add a lockdep check to verify that text_mutex is held in
text_poke() functions
- Repair the fallout of giving native_restore_fl() a prototype
- Prevent kernel memory dumps based on usermode RIP
- Wipe KASAN shadow stack before rewinding the stack to prevent false
positives
- Move the AMS GOTO enforcement to the actual build stage to allow
user API header extraction without a compiler
- Fix a section mismatch introduced by the on demand VDSO mapping
change
Miscellaneous:
- Trivial typo, GCC quirk removal and CC_SET/OUT() cleanups"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pti: Fix section mismatch warning/error
x86/vdso: Fix lsl operand order
x86/mce: Fix set_mce_nospec() to avoid #GP fault
x86/efi: Load fixmap GDT in efi_call_phys_epilog()
x86/nmi: Fix NMI uaccess race against CR3 switching
x86: Allow generating user-space headers without a compiler
x86/dumpstack: Don't dump kernel memory based on usermode RIP
x86/asm: Use CC_SET()/CC_OUT() in __gen_sigismember()
x86/alternatives: Lockdep-enforce text_mutex in text_poke*()
x86/entry/64: Wipe KASAN stack shadow before rewind_stack_do_exit()
x86/irqflags: Mark native_restore_fl extern inline
x86/build: Remove jump label quirk for GCC older than 4.5.2
x86/Kconfig: Fix trivial typo
x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+
x86/spectre: Add missing family 6 check to microcode check
Handle the case where microcode gets loaded on the BSP's hyperthread
sibling first and the boot_cpu_data's microcode revision doesn't get
updated because of early exit due to the siblings sharing a microcode
engine.
For that, simply write the updated revision on all CPUs unconditionally.
Signed-off-by: Filippo Sironi <sironi@amazon.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: prarit@redhat.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1533050970-14385-1-git-send-email-sironi@amazon.de
When preparing an MCE record for logging, boot_cpu_data.microcode is used
to read out the microcode revision on the box.
However, on systems where late microcode update has happened, the microcode
revision output in a MCE log record is wrong because
boot_cpu_data.microcode is not updated when the microcode gets updated.
But, the microcode revision saved in boot_cpu_data's microcode member
should be kept up-to-date, regardless, for consistency.
Make it so.
Fixes: fa94d0c6e0 ("x86/MCE: Save microcode revision in machine check records")
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: sironi@amazon.de
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180731112739.32338-1-prarit@redhat.com
Fix the section mismatch warning in arch/x86/mm/pti.c:
WARNING: vmlinux.o(.text+0x6972a): Section mismatch in reference from the function pti_clone_pgtable() to the function .init.text:pti_user_pagetable_walk_pte()
The function pti_clone_pgtable() references
the function __init pti_user_pagetable_walk_pte().
This is often because pti_clone_pgtable lacks a __init
annotation or the annotation of pti_user_pagetable_walk_pte is wrong.
FATAL: modpost: Section mismatches detected.
Fixes: 85900ea515 ("x86/pti: Map the vsyscall page if needed")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/43a6d6a3-d69d-5eda-da09-0b1c88215a2a@infradead.org
This keeps the historic default behavior for devices without a DMA mask,
but removes the warning about a lacking DMA mask for doing DMA without
a mask.
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
These are mostly fixes related to using ti-sysc interconnect target module
driver for accessing right register offsets for sgx and cpsw and for
no_console_suspend regression.
There is also a droid4 emmc fix where emmc may not get detected for some
models, and vibrator dts mismerge fix.
And we have a file permission fix for am335x-osd3358-sm-red.dts that
just got added. And we must tag RTC as system-power-controller for
am437x for PMIC to shut down during poweroff.
-----BEGIN PGP SIGNATURE-----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=CHc2
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.19/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omap variants against v4.19-rc1
These are mostly fixes related to using ti-sysc interconnect target module
driver for accessing right register offsets for sgx and cpsw and for
no_console_suspend regression.
There is also a droid4 emmc fix where emmc may not get detected for some
models, and vibrator dts mismerge fix.
And we have a file permission fix for am335x-osd3358-sm-red.dts that
just got added. And we must tag RTC as system-power-controller for
am437x for PMIC to shut down during poweroff.
* tag 'omap-for-v4.19/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-droid4: Fix emmc errors seen on some devices
ARM: dts: Fix file permission for am335x-osd3358-sm-red.dts
arm: dts: am4372: setup rtc as system-power-controller
ARM: dts: omap4-droid4: fix vibrations on Droid 4
bus: ti-sysc: Fix no_console_suspend handling
bus: ti-sysc: Fix module register ioremap for larger offsets
ARM: OMAP2+: Fix module address for modules using mpu_rt_idx
ARM: OMAP2+: Fix null hwmod for ti-sysc debug
Signed-off-by: Olof Johansson <olof@lixom.net>
In the __getcpu function, lsl is using the wrong target and destination
registers. Luckily, the compiler tends to choose %eax for both variables,
so it has been working so far.
Fixes: a582c540ac ("x86/vdso: Use RDPID in preference to LSL when available")
Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180901201452.27828-1-sneves@dei.uc.pt
The trick with flipping bit 63 to avoid loading the address of the 1:1
mapping of the poisoned page while the 1:1 map is updated used to work when
unmapping the page. But it falls down horribly when attempting to directly
set the page as uncacheable.
The problem is that when the cache mode is changed to uncachable, the pages
needs to be flushed from the cache first. But the decoy address is
non-canonical due to bit 63 flipped, and the CLFLUSH instruction throws a
#GP fault.
Add code to change_page_attr_set_clr() to fix the address before calling
flush.
Fixes: 284ce4011b ("x86/memory_failure: Introduce {set, clear}_mce_nospec()")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Link: https://lkml.kernel.org/r/20180831165506.GA9605@agluck-desk
Mark DMA devices on AXS103 and HSDK boards connected through IOC
port as dma-coherent.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
In 4.19-rc1, Eugeniy reported weird boot and IO errors on ARC HSDK
| INFO: task syslogd:77 blocked for more than 10 seconds.
| Not tainted 4.19.0-rc1-00007-gf213acea4e88 #40
| "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
| message.
| syslogd D 0 77 76 0x00000000
|
| Stack Trace:
| __switch_to+0x0/0xac
| __schedule+0x1b2/0x730
| io_schedule+0x5c/0xc0
| __lock_page+0x98/0xdc
| find_lock_entry+0x38/0x100
| shmem_getpage_gfp.isra.3+0x82/0xbfc
| shmem_fault+0x46/0x138
| handle_mm_fault+0x5bc/0x924
| do_page_fault+0x100/0x2b8
| ret_from_exception+0x0/0x8
He bisected to 84c6591103 ("locking/atomics,
asm-generic/bitops/lock.h: Rewrite using atomic_fetch_*()")
This commit however only unmasked the real issue introduced by commit
4aef66c8ae ("locking/atomic, arch/arc: Fix build") which missed the
retry-if-scond-failed branch in atomic_fetch_##op() macros.
The bisected commit started using atomic_fetch_##op() macros for building
the rest of atomics.
Fixes: 4aef66c8ae ("locking/atomic, arch/arc: Fix build")
Reported-by: Eugeniy Paltsev <paltsev@synopsys.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: wrote changelog]
When a system suffers from dcache aliasing a user program may observe
stale VDSO data from an aliased cache line. Notably this can break the
expectation that clock_gettime(CLOCK_MONOTONIC, ...) is, as its name
suggests, monotonic.
In order to ensure that users observe updates to the VDSO data page as
intended, align the user mappings of the VDSO data page such that their
cache colouring matches that of the virtual address range which the
kernel will use to update the data page - typically its unmapped address
within kseg0.
This ensures that we don't introduce aliasing cache lines for the VDSO
data page, and therefore that userland will observe updates without
requiring cache invalidation.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Reported-by: Rene Nielsen <rene.nielsen@microsemi.com>
Reported-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fixes: ebb5e78cc6 ("MIPS: Initial implementation of a VDSO")
Patchwork: https://patchwork.linux-mips.org/patch/20344/
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.4+
- Fix typos in SVE documentation
- Fix type-checking and implicit truncation for SMCCC calls
- Force CONFIG_HOLES_IN_ZONE=y so that SLAB doesn't fall over NOMAP regions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJbiSyOAAoJELescNyEwWM0Jc4IAMV6UIPNnARqKESMMGI8CPW3
+b75RKJvOz06wIsd/ko+at+4SU4om/qr5k1Yx6F2s9t1y7+1RokkP1ZXOivsOegp
KBtbDEzvwYWuePdMtZmXMMLOIOVzLC2UlqVGqdEBLNxYqfdS6H7IwgPlaXpu1GIu
n4F0d6oEKY3hTmFrmH9FN68ZrTpx8S2MZYIApokhBrNIaSyr7x8bUj8/v9OoaJsO
TwlG0y7W252alGni97WnX6gw0eM0HQ6yg8h+zNVmwksjUY+ZCS3w4ib3H8sS2FBH
vzr3XkgEPeWR1oSYO7P7Vv7erMQUCnS+q7UjQ09TVvHTcXGb3A+iqP+w3rXMbyo=
=gy5J
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A few arm64 fixes came in this week, specifically fixing some nasty
truncation of return values from firmware calls and resolving a
VM_BUG_ON due to accessing uninitialised struct pages corresponding to
NOMAP pages.
Summary:
- Fix typos in SVE documentation
- Fix type-checking and implicit truncation for SMCCC calls
- Force CONFIG_HOLES_IN_ZONE=y so that SLAB doesn't fall over NOMAP
regions"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: always enable CONFIG_HOLES_IN_ZONE
arm/arm64: smccc-1.1: Handle function result as parameters
arm/arm64: smccc-1.1: Make return values unsigned long
Documentation/arm64/sve: Couple of improvements and typos
When PTI is enabled on x86-32 the kernel uses the GDT mapped in the fixmap
for the simple reason that this address is also mapped for user-space.
The efi_call_phys_prolog()/efi_call_phys_epilog() wrappers change the GDT
to call EFI runtime services and switch back to the kernel GDT when they
return. But the switch-back uses the writable GDT, not the fixmap GDT.
When that happened and and the CPU returns to user-space it switches to the
user %cr3 and tries to restore user segment registers. This fails because
the writable GDT is not mapped in the user page-table, and without a GDT
the fault handlers also can't be launched. The result is a triple fault and
reboot of the machine.
Fix that by restoring the GDT back to the fixmap GDT which is also mapped
in the user page-table.
Fixes: 7757d607c6 x86/pti: ('Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32')
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: hpa@zytor.com
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/1535702738-10971-1-git-send-email-joro@8bytes.org
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCW4lM6AAKCRCAXGG7T9hj
vs8AAQDysFccg97UdopW3B7yklIaRqkfEIAsxe65f191MXsH2AEAp5SKxZqRPqBP
a9WHDj8ShB3BhZ/IxpdO9Y59U3Jo4wA=
=Gt4c
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.19b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- minor cleanup avoiding a warning when building with new gcc
- a patch to add a new sysfs node for Xen frontend/backend drivers to
make it easier to obtain the state of a pv device
- two fixes for 32-bit pv-guests to avoid intermediate L1TF vulnerable
PTEs
* tag 'for-linus-4.19b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: remove redundant variable save_pud
xen: export device state to sysfs
x86/pae: use 64 bit atomic xchg function in native_ptep_get_and_clear
x86/xen: don't write ptes directly in 32-bit PV guests
- Fix wrong date and time on PMU-based Macs.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCW4lCFhUcZ2VlcnRAbGlu
dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XButAD/Z+zyKOaFZQ28cYfAmhUMgi4LvICF
THHND3O321KT5WEA/1E1/SxqvH5juQCoaF7GdJGVIQ6E0w6WYgt8LC1WFWML
=J7Db
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v4.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k fix from Geert Uytterhoeven:
"Just a single fix for a bug introduced during the merge window: fix
wrong date and time on PMU-based Macs"
* tag 'm68k-for-v4.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k/mac: Use correct PMU response format
A NMI can hit in the middle of context switching or in the middle of
switch_mm_irqs_off(). In either case, CR3 might not match current->mm,
which could cause copy_from_user_nmi() and friends to read the wrong
memory.
Fix it by adding a new nmi_uaccess_okay() helper and checking it in
copy_from_user_nmi() and in __copy_from_user_nmi()'s callers.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rik van Riel <riel@surriel.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/dd956eba16646fd0b15c3c0741269dfd84452dac.1535557289.git.luto@kernel.org
When bootstrapping an architecture, it's usual to generate the kernel's
user-space headers (make headers_install) before building a compiler. Move
the compiler check (for asm goto support) to the archprepare target so that
it is only done when building code for the target.
Fixes: e501ce957a ("x86: Force asm-goto")
Reported-by: Helmut Grohne <helmutg@debian.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180829194317.GA4765@decadent.org.uk
show_opcodes() is used both for dumping kernel instructions and for dumping
user instructions. If userspace causes #PF by jumping to a kernel address,
show_opcodes() can be reached with regs->ip controlled by the user,
pointing to kernel code. Make sure that userspace can't trick us into
dumping kernel memory into dmesg.
Fixes: 7cccf0725c ("x86/dumpstack: Add a show_ip() function")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: security@kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180828154901.112726-1-jannh@google.com
Commit 6d526ee26c ("arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA")
only enabled HOLES_IN_ZONE for NUMA systems because the NUMA code was
choking on the missing zone for nomap pages. This problem doesn't just
apply to NUMA systems.
If the architecture doesn't set HAVE_ARCH_PFN_VALID, pfn_valid() will
return true if the pfn is part of a valid sparsemem section.
When working with multiple pages, the mm code uses pfn_valid_within()
to test each page it uses within the sparsemem section is valid. On
most systems memory comes in MAX_ORDER_NR_PAGES chunks which all
have valid/initialised struct pages. In this case pfn_valid_within()
is optimised out.
Systems where this isn't true (e.g. due to nomap) should set
HOLES_IN_ZONE and provide HAVE_ARCH_PFN_VALID so that mm tests each
page as it works with it.
Currently non-NUMA arm64 systems can't enable HOLES_IN_ZONE, leading to
a VM_BUG_ON():
| page:fffffdff802e1780 is uninitialized and poisoned
| raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
| raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
| page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
| ------------[ cut here ]------------
| kernel BUG at include/linux/mm.h:978!
| Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[...]
| CPU: 1 PID: 25236 Comm: dd Not tainted 4.18.0 #7
| Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
| pstate: 40000085 (nZcv daIf -PAN -UAO)
| pc : move_freepages_block+0x144/0x248
| lr : move_freepages_block+0x144/0x248
| sp : fffffe0071177680
[...]
| Process dd (pid: 25236, stack limit = 0x0000000094cc07fb)
| Call trace:
| move_freepages_block+0x144/0x248
| steal_suitable_fallback+0x100/0x16c
| get_page_from_freelist+0x440/0xb20
| __alloc_pages_nodemask+0xe8/0x838
| new_slab+0xd4/0x418
| ___slab_alloc.constprop.27+0x380/0x4a8
| __slab_alloc.isra.21.constprop.26+0x24/0x34
| kmem_cache_alloc+0xa8/0x180
| alloc_buffer_head+0x1c/0x90
| alloc_page_buffers+0x68/0xb0
| create_empty_buffers+0x20/0x1ec
| create_page_buffers+0xb0/0xf0
| __block_write_begin_int+0xc4/0x564
| __block_write_begin+0x10/0x18
| block_write_begin+0x48/0xd0
| blkdev_write_begin+0x28/0x30
| generic_perform_write+0x98/0x16c
| __generic_file_write_iter+0x138/0x168
| blkdev_write_iter+0x80/0xf0
| __vfs_write+0xe4/0x10c
| vfs_write+0xb4/0x168
| ksys_write+0x44/0x88
| sys_write+0xc/0x14
| el0_svc_naked+0x30/0x34
| Code: aa1303e0 90001a01 91296421 94008902 (d4210000)
| ---[ end trace 1601ba47f6e883fe ]---
Remove the NUMA dependency.
Link: https://www.spinics.net/lists/arm-kernel/msg671851.html
Cc: <stable@vger.kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that the 68k Mac port has adopted the via-pmu driver, it must decode
the PMU response accordingly otherwise the date and time will be wrong.
Fixes: ebd722275f ("macintosh/via-pmu: Replace via-pmu68k driver with via-pmu driver")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Commit cafa0010cd ("Raise the minimum required gcc version to 4.6")
bumped the minimum GCC version to 4.6 for all architectures.
With GCC >= 4.6 assumed, 'upto_gcc44' is empty, 'atleast_gcc44' is y.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Allowing x86_emulate_instruction() to be called directly has led to
subtle bugs being introduced, e.g. not setting EMULTYPE_NO_REEXECUTE
in the emulation type. While most of the blame lies on re-execute
being opt-out, exporting x86_emulate_instruction() also exposes its
cr2 parameter, which may have contributed to commit d391f12070
("x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO
when running nested") using x86_emulate_instruction() instead of
emulate_instruction() because "hey, I have a cr2!", which in turn
introduced its EMULTYPE_NO_REEXECUTE bug.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Lack of the kvm_ prefix gives the impression that it's a VMX or SVM
specific function, and there's no conflict that prevents adding the
kvm_ prefix.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Commit a6f177efaa ("KVM: Reenter guest after emulation failure if
due to access to non-mmio address") added reexecute_instruction() to
handle the scenario where two (or more) vCPUS race to write a shadowed
page, i.e. reexecute_instruction() is intended to return true if and
only if the instruction being emulated was accessing a shadowed page.
As L0 is only explicitly shadowing L1 tables, an emulation failure of
a nested VM instruction cannot be due to a race to write a shadowed
page and so should never be re-executed.
This fixes an issue where an "MMIO" emulation failure[1] in L2 is all
but guaranteed to result in an infinite loop when TDP is enabled.
Because "cr2" is actually an L2 GPA when TDP is enabled, calling
kvm_mmu_gva_to_gpa_write() to translate cr2 in the non-direct mapped
case (L2 is never direct mapped) will almost always yield UNMAPPED_GVA
and cause reexecute_instruction() to immediately return true. The
!mmio_info_in_cache() check in kvm_mmu_page_fault() doesn't catch this
case because mmio_info_in_cache() returns false for a nested MMU (the
MMIO caching currently handles L1 only, e.g. to cache nested guests'
GPAs we'd have to manually flush the cache when switching between
VMs and when L1 updated its page tables controlling the nested guest).
Way back when, commit 68be080345 ("KVM: x86: never re-execute
instruction with enabled tdp") changed reexecute_instruction() to
always return false when using TDP under the assumption that KVM would
only get into the emulator for MMIO. Commit 95b3cf69bd ("KVM: x86:
let reexecute_instruction work for tdp") effectively reverted that
behavior in order to handle the scenario where emulation failed due to
an access from L1 to the shadow page tables for L2, but it didn't
account for the case where emulation failed in L2 with TDP enabled.
All of the above logic also applies to retry_instruction(), added by
commit 1cb3f3ae5a ("KVM: x86: retry non-page-table writing
instructions"). An indefinite loop in retry_instruction() should be
impossible as it protects against retrying the same instruction over
and over, but it's still correct to not retry an L2 instruction in
the first place.
Fix the immediate issue by adding a check for a nested guest when
determining whether or not to allow retry in kvm_mmu_page_fault().
In addition to fixing the immediate bug, add WARN_ON_ONCE in the
retry functions since they are not designed to handle nested cases,
i.e. they need to be modified even if there is some scenario in the
future where we want to allow retrying a nested guest.
[1] This issue was encountered after commit 3a2936dedd ("kvm: mmu:
Don't expose private memslots to L2") changed the page fault path
to return KVM_PFN_NOSLOT when translating an L2 access to a
prive memslot. Returning KVM_PFN_NOSLOT is semantically correct
when we want to hide a memslot from L2, i.e. there effectively is
no defined memory region for L2, but it has the unfortunate side
effect of making KVM think the GFN is a MMIO page, thus triggering
emulation. The failure occurred with in-development code that
deliberately exposed a private memslot to L2, which L2 accessed
with an instruction that is not emulated by KVM.
Fixes: 95b3cf69bd ("KVM: x86: let reexecute_instruction work for tdp")
Fixes: 1cb3f3ae5a ("KVM: x86: retry non-page-table writing instructions")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Cc: Xiao Guangrong <xiaoguangrong@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Effectively force kvm_mmu_page_fault() to opt-in to allowing retry to
make it more obvious when and why it allows emulation to be retried.
Previously this approach was less convenient due to retry and
re-execute behavior being controlled by separate flags that were also
inverted in their implementations (opt-in versus opt-out).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
retry_instruction() and reexecute_instruction() are a package deal,
i.e. there is no scenario where one is allowed and the other is not.
Merge their controlling emulation type flags to enforce this in code.
Name the combined flag EMULTYPE_ALLOW_RETRY to make it abundantly
clear that we are allowing re{try,execute} to occur, as opposed to
explicitly requesting retry of a previously failed instruction.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Re-execution of an instruction after emulation decode failure is
intended to be used only when emulating shadow page accesses. Invert
the flag to make allowing re-execution opt-in since that behavior is
by far in the minority.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Hauke Mehrtens