We've had rather rare reports of bmap btree block corruption where
the bmap root block has a level count of zero. The root cause of the
corruption is so far unknown. We do have verifier checks to detect
this form of on-disk corruption, but this doesn't cover a memory
corruption variant of the problem. The latter is a reasonable
possibility because the root block is part of the inode fork and can
reside in-core for some time before inode extents are read.
If this occurs, it leads to a system crash such as the following:
BUG: unable to handle kernel paging request at ffffffff00000221
PF error: [normal kernel read fault]
...
RIP: 0010:xfs_trans_brelse+0xf/0x200 [xfs]
...
Call Trace:
xfs_iread_extents+0x379/0x540 [xfs]
xfs_file_iomap_begin_delay+0x11a/0xb40 [xfs]
? xfs_attr_get+0xd1/0x120 [xfs]
? iomap_write_begin.constprop.40+0x2d0/0x2d0
xfs_file_iomap_begin+0x4c4/0x6d0 [xfs]
? __vfs_getxattr+0x53/0x70
? iomap_write_begin.constprop.40+0x2d0/0x2d0
iomap_apply+0x63/0x130
? iomap_write_begin.constprop.40+0x2d0/0x2d0
iomap_file_buffered_write+0x62/0x90
? iomap_write_begin.constprop.40+0x2d0/0x2d0
xfs_file_buffered_aio_write+0xe4/0x3b0 [xfs]
__vfs_write+0x150/0x1b0
vfs_write+0xba/0x1c0
ksys_pwrite64+0x64/0xa0
do_syscall_64+0x5a/0x1d0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The crash occurs because xfs_iread_extents() attempts to release an
uninitialized buffer pointer as the level == 0 value prevented the
buffer from ever being allocated or read. Change the level > 0
assert to an explicit error check in xfs_iread_extents() to avoid
crashing the kernel in the event of localized, in-core inode
corruption.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If we have racing buffered and direct I/O COW fork extents under
writeback can have been moved to the data fork by the time we call
xfs_reflink_convert_cow from xfs_submit_ioend. This would be mostly
harmless as the block numbers don't change by this move, except for
the fact that xfs_bmapi_write will crash or trigger asserts when
not finding existing extents, even despite trying to paper over this
with the XFS_BMAPI_CONVERT_ONLY flag.
Instead of special casing non-transaction conversions in the already
way too complicated xfs_bmapi_write just add a new helper for the much
simpler non-transactional COW fork case, which simplify ignores not
found extents.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This way we can actually count how many bytes got converted and how many
calls we need, unlike in the caller which doesn't have the detailed
view.
Note that this includes a slight change in behavior as the
xs_xstrat_quick is now bumped for every allocation instead of just the
one covering the requested writeback offset, which makes a lot more
sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
No need to deal with the transaction and the inode locking in the
caller. Note that we also switch to passing whichfork as the second
paramter, matching what most related functions do.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Delalloc conversion has traditionally been part of our function to
allocate blocks on disk (first xfs_bmapi, then xfs_bmapi_write), but
delalloc conversion is a little special as we really do not want
to allocate blocks over holes, for which we don't have reservations.
Split the delalloc conversions into a separate helper to keep the
code simple and structured.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We want to be able to reuse them for the upcoming dedidcated delalloc
convert routine.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move boilerplate code from the callers into xfs_bmap_btree_to_extents:
- exit early without failure if we don't need to convert to the
extent format
- assert that we have a btree cursor
- don't reinitialize the passed in logflags argument
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The writeback delalloc conversion code is racy with respect to
changes in the currently cached file mapping outside of the current
page. This is because the ilock is cycled between the time the
caller originally looked up the mapping and across each real
allocation of the provided file range. This code has collected
various hacks over the years to help combat the symptoms of these
races (i.e., truncate race detection, allocation into hole
detection, etc.), but none address the fundamental problem that the
imap may not be valid at allocation time.
Rather than continue to use race detection hacks, update writeback
delalloc conversion to a model that explicitly converts the delalloc
extent backing the current file offset being processed. The current
file offset is the only block we can trust to remain once the ilock
is dropped because any operation that can remove the block
(truncate, hole punch, etc.) must flush and discard pagecache pages
first.
Modify xfs_iomap_write_allocate() to use the xfs_bmapi_delalloc()
mechanism to request allocation of the entire delalloc extent
backing the current offset instead of assuming the extent passed by
the caller is unchanged. Record the range specified by the caller
and apply it to the resulting allocated extent so previous checks by
the caller for COW fork overlap are not lost. Finally, overload the
bmapi delalloc flag with the range reval flag behavior since this is
the only use case for both.
This ensures that writeback always picks up the correct
and current extent associated with the page, regardless of races
with other extent modifying operations. If operating on a data fork
and the COW overlap state has changed since the ilock was cycled,
the caller revalidates against the COW fork sequence number before
using the imap for the next block.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The writeback delalloc conversion code is racy with respect to
changes in the currently cached file mapping. This stems from the
fact that the bmapi allocation code requires a file range to
allocate and the writeback conversion code assumes the range of the
currently cached mapping is still valid with respect to the fork. It
may not be valid, however, because the ilock is cycled (potentially
multiple times) between the time the cached mapping was populated
and the delalloc conversion occurs.
To facilitate a solution to this problem, create a new
xfs_bmapi_delalloc() wrapper to xfs_bmapi_write() that takes a file
(FSB) offset and attempts to allocate whatever delalloc extent backs
the offset. Use a new bmapi flag to cause xfs_bmapi_write() to set
the range based on the extent backing the bno parameter unless bno
lands in a hole. If bno does land in a hole, fall back to the
current behavior (which may result in an error or quietly skipping
holes in the specified range depending on other parameters). This
patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that the cached writeback mapping is explicitly invalidated on
data fork changes, the EOF trimming band-aid is no longer necessary.
Remove xfs_trim_extent_eof() as well since it has no other users.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Owner information for static fs metadata can be defined readonly at
build time because it never changes across filesystems. This enables us
to reduce stack usage (particularly in scrub) because we can use the
statically defined oinfo structures.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Only certain functions actually change the contents of an
xfs_owner_info; the rest can accept a const struct pointer. This will
enable us to save stack space by hoisting static owner info types to
be const global variables.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Long saga. There have been days spent following this through dead end
after dead end in multi-GB event traces. This morning, after writing
a trace-cmd wrapper that enabled me to be more selective about XFS
trace points, I discovered that I could get just enough essential
tracepoints enabled that there was a 50:50 chance the fsx config
would fail at ~115k ops. If it didn't fail at op 115547, I stopped
fsx at op 115548 anyway.
That gave me two traces - one where the problem manifested, and one
where it didn't. After refining the traces to have the necessary
information, I found that in the failing case there was a real
extent in the COW fork compared to an unwritten extent in the
working case.
Walking back through the two traces to the point where the CWO fork
extents actually diverged, I found that the bad case had an extra
unwritten extent in it. This is likely because the bug it led me to
had triggered multiple times in those 115k ops, leaving stray
COW extents around. What I saw was a COW delalloc conversion to an
unwritten extent (as they should always be through
xfs_iomap_write_allocate()) resulted in a /written extent/:
xfs_writepage: dev 259:0 ino 0x83 pgoff 0x17000 size 0x79a00 offset 0 length 0
xfs_iext_remove: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/2 offset 32 block 152 count 20 flag 1 caller xfs_bmap_add_extent_delay_real
xfs_bmap_pre_update: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/1 offset 1 block 4503599627239429 count 31 flag 0 caller xfs_bmap_add_extent_delay_real
xfs_bmap_post_update: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/1 offset 1 block 121 count 51 flag 0 caller xfs_bmap_add_ex
Basically, Cow fork before:
0 1 32 52
+H+DDDDDDDDDDDD+UUUUUUUUUUU+
PREV RIGHT
COW delalloc conversion allocates:
1 32
+uuuuuuuuuuuu+
NEW
And the result according to the xfs_bmap_post_update trace was:
0 1 32 52
+H+wwwwwwwwwwwwwwwwwwwwwwww+
PREV
Which is clearly wrong - it should be a merged unwritten extent,
not an unwritten extent.
That lead me to look at the LEFT_FILLING|RIGHT_FILLING|RIGHT_CONTIG
case in xfs_bmap_add_extent_delay_real(), and sure enough, there's
the bug.
It takes the old delalloc extent (PREV) and adds the length of the
RIGHT extent to it, takes the start block from NEW, removes the
RIGHT extent and then updates PREV with the new extent.
What it fails to do is update PREV.br_state. For delalloc, this is
always XFS_EXT_NORM, while in this case we are converting the
delayed allocation to unwritten, so it needs to be updated to
XFS_EXT_UNWRITTEN. This LF|RF|RC case does not do this, and so
the resultant extent is always written.
And that's the bug I've been chasing for a week - a bmap btree bug,
not a reflink/dedupe/copy_file_range bug, but a BMBT bug introduced
with the recent in core extent tree scalability enhancements.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This patch adds xfs_attr_set_args and xfs_bmap_set_attrforkoff.
These sub-routines set the attributes specified in @args.
We will use this later for setting parent pointers as a deferred
attribute operation.
[dgc: remove attr fork init code from xfs_attr_set_args().]
[dgc: xfs_attr_try_sf_addname() NULLs args.trans after commit.]
[dgc: correct sf add error handling.]
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The option to enable unwritten extents was made default in 2003,
removed from mkfs in 2007, and cannot be disabled in v5. We also
rely on it for a lot of common functionality, so filesystems without
it will run a completely untested and buggy code path. Enabling the
support also is a simple bit flip using xfs_db, so legacy file
systems can still be brought forward.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Commit 01239d77b9 ("xfs: fix a null pointer dereference in
xfs_bmap_extents_to_btree") attempted to fix a null pointer
dreference when a fuzzing corruption of some kind was found.
This fix was flawed, resulting in assert failures like:
XFS: Assertion failed: ifp->if_broot == NULL, file: fs/xfs/libxfs/xfs_bmap.c, line: 715
.....
Call Trace:
xfs_bmap_extents_to_btree+0x6b9/0x7b0
__xfs_bunmapi+0xae7/0xf00
? xfs_log_reserve+0x1c8/0x290
xfs_reflink_remap_extent+0x20b/0x620
xfs_reflink_remap_blocks+0x7e/0x290
xfs_reflink_remap_range+0x311/0x530
vfs_dedupe_file_range_one+0xd7/0xe0
vfs_dedupe_file_range+0x15b/0x1a0
do_vfs_ioctl+0x267/0x6c0
The problem is that the error handling code now asserts that the
inode fork is not in btree format before the error handling code
undoes the modifications that put the fork back in extent format.
Fix this by moving the assert back to after the xfs_iroot_realloc()
call that returns the fork to extent format, and clean up the jump
labels to be meaningful.
Also, returning ENOSPC when xfs_btree_get_bufl() fails to
instantiate the buffer that was allocated (the actual fix in the
commit mentioned above) is incorrect. This is a fatal error - only
an invalid block address or a filesystem shutdown can result in
failing to get a buffer here.
Hence change this to EFSCORRUPTED so that the higher layer knows
this was a corruption related failure and should not treat it as an
ENOSPC error. This should result in a shutdown (via cancelling a
dirty transaction) which is necessary as we do not attempt to clean
up the (invalid) block that we have already allocated.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Fuzzing tool reports a write to null pointer error in the
xfs_bmap_extents_to_btree, fix it by bailing out on encountering
a null pointer.
Signed-off-by: Shan Hai <shan.hai@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
struct xfs_defer_ops has now been reduced to a single list_head. The
external dfops mechanism is unused and thus everywhere a (permanent)
transaction is accessible the associated dfops structure is as well.
Remove the xfs_defer_ops structure and fold the list_head into the
transaction. Also remove the last remnant of external dfops in
xfs_trans_dup().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The majority of remaining references to struct xfs_defer_ops in XFS
are associated with xfs_defer_add(). At this point, there are no
more external xfs_defer_ops users left. All instances of
xfs_defer_ops are embedded in the transaction, which means we can
safely pass the transaction down to the dfops add interface.
Update xfs_defer_add() to receive the transaction as a parameter.
Various subsystems implement wrappers to allocate and construct the
context specific data structures for the associated deferred
operation type. Update these to also carry the transaction down as
needed and clean up unused dfops parameters along the way.
This removes most of the remaining references to struct
xfs_defer_ops throughout the code and facilitates removal of the
structure.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[darrick: fix unused variable warnings with ftrace disabled]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The dfops infrastructure ->finish_item() callback passes the
transaction and dfops as separate parameters. Since dfops is always
part of a transaction, the latter parameter is no longer necessary.
Remove it from the various callbacks.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Inodes that are held across deferred operations are explicitly
joined to the dfops structure to ensure appropriate relogging.
While inodes are currently joined explicitly, we can detect the
conditions that require relogging at dfops finish time by inspecting
the transaction item list for inodes with ili_lock_flags == 0.
Replace the xfs_defer_ijoin() infrastructure with such detection and
automatic relogging of held inodes. This eliminates the need for the
per-dfops inode list, replaced by an on-stack variant in
xfs_defer_trans_roll().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Log items that require relogging during deferred operations
processing are explicitly joined to the associated dfops via the
xfs_defer_*join() helpers. These calls imply that the associated
object is "held" by the transaction such that when rolled, the item
can be immediately joined to a follow up transaction. For buffers,
this means the buffer remains locked and held after each roll. For
inodes, this means that the inode remains locked.
Failure to join a held item to the dfops structure means the
associated object pins the tail of the log while dfops processing
completes, because the item never relogs and is not unlocked or
released until deferred processing completes.
Currently, all buffers that are held in transactions (XFS_BLI_HOLD)
with deferred operations are explicitly joined to the dfops. This is
not the case for inodes, however, as various contexts defer
operations to transactions with held inodes without explicit joins
to the associated dfops (and thus not relogging).
While this is not a catastrophic problem, it is not ideal. Given
that we want to eventually relog such items automatically during
dfops processing, start by explicitly adding these missing
xfs_defer_ijoin() calls. A call is added everywhere an inode is
joined to a transaction without transferring lock ownership and
said transaction runs deferred operations.
All xfs_defer_ijoin() calls will eventually be replaced by automatic
dfops inode relogging. This patch essentially implements the
behavior change that would otherwise occur due to automatic inode
dfops relogging.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The dop_low field enables the low free space allocation mode when a
previous allocation has detected difficulty allocating blocks. It
has historically been part of the xfs_defer_ops structure, which
means if enabled, it remains enabled across a set of transactions
until the deferred operations have completed and the dfops is reset.
Now that the dfops is embedded in the transaction, we can save a bit
more space by using a transaction flag rather than a standalone
boolean. Drop the ->dop_low field and replace it with a transaction
flag that is set at the same points, carried across rolling
transactions and cleared on completion of deferred operations. This
essentially emulates the behavior of ->dop_low and so should not
change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We only have a few more callers left, so seize the opportunity and kill
it off.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
At this point, the transaction subsystem completely manages deferred
items internally such that the common and boilerplate
xfs_trans_alloc() -> xfs_defer_init() -> xfs_defer_finish() ->
xfs_trans_commit() sequence can be replaced with a simple
transaction allocation and commit.
Remove all such boilerplate deferred ops code. In doing so, we
change each case over to use the dfops in the transaction and
specifically eliminate:
- The on-stack dfops and associated xfs_defer_init() call, as the
internal dfops is initialized on transaction allocation.
- xfs_bmap_finish() calls that precede a final xfs_trans_commit() of
a transaction.
- xfs_defer_cancel() calls in error handlers that precede a
transaction cancel.
The only deferred ops calls that remain are those that are
non-deterministic with respect to the final commit of the associated
transaction or are open-coded due to special handling.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The error argument to xfs_btree_del_cursor already understands the
"nonzero for error" semantics, so remove pointless error testing in the
callers and pass it directly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
All but one caller of xfs_defer_init() passes in the ->t_firstblock
of the associated transaction. The one outlier is
xlog_recover_process_intents(), which simply passes a dummy value
because a valid pointer is required. This firstblock variable can
simply be removed.
At this point we could remove the xfs_defer_init() firstblock
parameter and initialize ->t_firstblock directly. Even that is not
necessary, however, because ->t_firstblock is automatically
reinitialized in the new transaction on a transaction roll. Since
xfs_defer_init() should never occur more than once on a particular
transaction (since the corresponding finish will roll it), replace
the reinit from xfs_defer_init() with an assert that verifies the
transaction has a NULLFSBLOCK firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xfs_alloc_arg.firstblock field is used to control the starting
agno for an allocation. The structure already carries a pointer to
the transaction, which carries the current firstblock value.
Remove the field and access ->t_firstblock directly in the
allocation code.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The bmbt cursor private structure has a firstblock field that is
used to maintain locking order on bmbt allocations. The field holds
an actual firstblock value (as opposed to a pointer), so it is
initialized on cursor creation, updated on allocation and then the
value is transferred back to the source before the cursor is
destroyed.
This value is always transferred from and back to the ->t_firstblock
field. Since xfs_btree_cur already carries a reference to the
transaction, we can remove this field from xfs_btree_cur and the
associated copying. The bmbt allocations will update the value in
the transaction directly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The bmap format helpers receive firstblock via ->t_firstblock. Drop
the param and access it directly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The add extent helpers all receive firstblock via ->t_firstblock.
Drop the parameter and access it directly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xfs_bmalloca.firstblock field carries the firstblock value from
the transaction into the bmap infrastructure. It's initialized in
one place from ->t_firstblock, so drop the field and access
->t_firstblock directly throughout the bmap code.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Also remove the unnecessary xfs_bmap_split_extent_at() parameter.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The only callers pass ->t_firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers pass ->t_firstblock from the current transaction.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers pass ->t_firstblock from the current transaction.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Convert all xfs_bunmapi() callers to ->t_firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Similar to the dirops code, the xattr code uses an on-stack
firstblock variable for the various operations. This code rolls the
underlying transaction in various places, however, which means we
cannot simply replace the local firstblock vars with ->t_firstblock.
Doing so (without further changes) would invalidate the memory
pointed to by xfs_da_args.firstblock as soon as the first
transaction rolls.
To avoid this problem, remove xfs_da_args.firstblock and replace all
such accesses with ->t_firstblock at the same time. This ensures
that accesses to the current firstblock always occur through the
current transaction rather than a potentially invalid xfs_da_args
pointer.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Note that this codepath is a user of struct xfs_da_args. Switch it
over to ->t_firstblock in preparation to remove
xfs_da_args.firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_bmapi_write() always expects a valid firstblock pointer. It
immediately dereferences the pointer to help determine how to
initialize the bma.minleft field. The remaining accesses are
related to modifying btree format forks, which is only relevant for
!COW fork callers.
The reflink code passes a NULL transaction to xfs_bmapi_write() in a
couple places that do COW fork unwritten conversion. The purpose of
the firstblock field is to track the first block allocation in the
current transaction, so technically firstblock should not be
required for these callers either.
Tweak xfs_bmapi_write() to initialize the bma correctly without
accessing the firstblock pointer if no transaction is provided in
the first place. Update the reflink callers to pass NULL instead of
otherwise unused firstblock references.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Most callers of xfs_defer_init() immediately attach the dfops
structure to a transaction. Add a transaction parameter to eliminate
much of this boilerplate code. This also helps self-document the
fact that many codepaths now expect a dfops pointer implicitly via
xfs_trans->t_dfops.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All assignments of xfs_btree_cur.bc_private.b.dfops originate from
->t_dfops. Replace accesses of the former with the latter and remove
the unnecessary field. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers of the various bmap extent helpers now use ->t_dfops.
Remove the unnecessary dfops params and access ->t_dfops directly.
This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use ->t_dfops for the collapse and insert range transactions. These
are the only callers of the respective bmap helpers, so replace the
unnecessary dfops parameters with direct accesses to ->t_dfops.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that bma.dfops is only assigned from ->t_dfops, replace all
accesses to the former with the latter and remove the unnecessary
field. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All xfs_bmapi_remap() callers already use ->t_dfops. Note that
deferred completion context unconditionally sets ->t_dfops if it
hasn't already been set by the caller. Remove the unnecessary
parameter and access ->t_dfops directly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that all xfs_bunmapi() callers use ->t_dfops, remove the
unnecessary parameter and access ->t_dfops directly. This patch does
not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that all callers use ->t_dfops, the xfs_bmapi_write() dfops
parameter is no longer necessary. Remove it and access ->t_dfops
directly. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that xfs_da_args->dfops is always assigned from a ->t_dfops
pointer (or one that is immediately attached), replace all
downstream accesses of the former with the latter and remove the
field from struct xfs_da_args.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Brian Foster