When a thread mlocks an address space backed either by file pages which
are currently not present in memory or swapped out anon pages (not in
swapcache), a new page is allocated and added to the local pagevec
(lru_add_pvec), I/O is triggered and the thread then sleeps on the page.
On I/O completion, the thread can wake on a different CPU, the mlock
syscall will then sets the PageMlocked() bit of the page but will not be
able to put that page in unevictable LRU as the page is on the pagevec
of a different CPU. Even on drain, that page will go to evictable LRU
because the PageMlocked() bit is not checked on pagevec drain.
The page will eventually go to right LRU on reclaim but the LRU stats
will remain skewed for a long time.
This patch puts all the pages, even unevictable, to the pagevecs and on
the drain, the pages will be added on their LRUs correctly by checking
their evictability. This resolves the mlocked pages on pagevec of other
CPUs issue because when those pagevecs will be drained, the mlocked file
pages will go to unevictable LRU. Also this makes the race with munlock
easier to resolve because the pagevec drains happen in LRU lock.
However there is still one place which makes a page evictable and does
PageLRU check on that page without LRU lock and needs special attention.
TestClearPageMlocked() and isolate_lru_page() in clear_page_mlock().
#0: __pagevec_lru_add_fn #1: clear_page_mlock
SetPageLRU() if (!TestClearPageMlocked())
return
smp_mb() // <--required
// inside does PageLRU
if (!PageMlocked()) if (isolate_lru_page())
move to evictable LRU putback_lru_page()
else
move to unevictable LRU
In '#1', TestClearPageMlocked() provides full memory barrier semantics
and thus the PageLRU check (inside isolate_lru_page) can not be
reordered before it.
In '#0', without explicit memory barrier, the PageMlocked() check can be
reordered before SetPageLRU(). If that happens, '#0' can put a page in
unevictable LRU and '#1' might have just cleared the Mlocked bit of that
page but fails to isolate as PageLRU fails as '#0' still hasn't set
PageLRU bit of that page. That page will be stranded on the unevictable
LRU.
There is one (good) side effect though. Without this patch, the pages
allocated for System V shared memory segment are added to evictable LRUs
even after shmctl(SHM_LOCK) on that segment. This patch will correctly
put such pages to unevictable LRU.
Link: http://lkml.kernel.org/r/20171121211241.18877-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shaohua Li <shli@fb.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After commit a983b5ebee ("mm: memcontrol: fix excessive complexity in
memory.stat reporting"), we observed slowly upward creeping NR_WRITEBACK
counts over the course of several days, both the per-memcg stats as well
as the system counter in e.g. /proc/meminfo.
The conversion from full per-cpu stat counts to per-cpu cached atomic
stat counts introduced an irq-unsafe RMW operation into the updates.
Most stat updates come from process context, but one notable exception
is the NR_WRITEBACK counter. While writebacks are issued from process
context, they are retired from (soft)irq context.
When writeback completions interrupt the RMW counter updates of new
writebacks being issued, the decs from the completions are lost.
Since the global updates are routed through the joint lruvec API, both
the memcg counters as well as the system counters are affected.
This patch makes the joint stat and event API irq safe.
Link: http://lkml.kernel.org/r/20180203082353.17284-1-hannes@cmpxchg.org
Fixes: a983b5ebee ("mm: memcontrol: fix excessive complexity in memory.stat reporting")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Debugged-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Build testing with LTO found a couple of files that get compiled
differently depending on whether asm/byteorder.h gets included early
enough or not. In particular, include/asm-generic/qrwlock_types.h is
affected by this, but there are probably others as well.
The symptom is a series of LTO link time warnings, including these:
net/netlabel/netlabel_unlabeled.h:223: error: type of 'netlbl_unlhsh_add' does not match original declaration [-Werror=lto-type-mismatch]
int netlbl_unlhsh_add(struct net *net,
net/netlabel/netlabel_unlabeled.c:377: note: 'netlbl_unlhsh_add' was previously declared here
include/net/ipv6.h:360: error: type of 'ipv6_renew_options_kern' does not match original declaration [-Werror=lto-type-mismatch]
ipv6_renew_options_kern(struct sock *sk,
net/ipv6/exthdrs.c:1162: note: 'ipv6_renew_options_kern' was previously declared here
net/core/dev.c:761: note: 'dev_get_by_name_rcu' was previously declared here
struct net_device *dev_get_by_name_rcu(struct net *net, const char *name)
net/core/dev.c:761: note: code may be misoptimized unless -fno-strict-aliasing is used
drivers/gpu/drm/i915/i915_drv.h:3377: error: type of 'i915_gem_object_set_to_wc_domain' does not match original declaration [-Werror=lto-type-mismatch]
i915_gem_object_set_to_wc_domain(struct drm_i915_gem_object *obj, bool write);
drivers/gpu/drm/i915/i915_gem.c:3639: note: 'i915_gem_object_set_to_wc_domain' was previously declared here
include/linux/debugfs.h:92:9: error: type of 'debugfs_attr_read' does not match original declaration [-Werror=lto-type-mismatch]
ssize_t debugfs_attr_read(struct file *file, char __user *buf,
fs/debugfs/file.c:318: note: 'debugfs_attr_read' was previously declared here
include/linux/rwlock_api_smp.h:30: error: type of '_raw_read_unlock' does not match original declaration [-Werror=lto-type-mismatch]
void __lockfunc _raw_read_unlock(rwlock_t *lock) __releases(lock);
kernel/locking/spinlock.c:246:26: note: '_raw_read_unlock' was previously declared here
include/linux/fs.h:3308:5: error: type of 'simple_attr_open' does not match original declaration [-Werror=lto-type-mismatch]
int simple_attr_open(struct inode *inode, struct file *file,
fs/libfs.c:795: note: 'simple_attr_open' was previously declared here
All of the above are caused by include/asm-generic/qrwlock_types.h
failing to include asm/byteorder.h after commit e0d02285f1
("locking/qrwlock: Use 'struct qrwlock' instead of 'struct __qrwlock'")
in linux-4.15.
Similar bugs may or may not exist in older kernels as well, but there is
no easy way to test those with link-time optimizations, and kernels
before 4.14 are harder to fix because they don't have Babu's patch
series
We had similar issues with CONFIG_ symbols in the past and ended up
always including the configuration headers though linux/kconfig.h. This
works around the issue through that same file, defining either
__BIG_ENDIAN or __LITTLE_ENDIAN depending on CONFIG_CPU_BIG_ENDIAN,
which is now always set on all architectures since commit 4c97a0c8fe
("arch: define CPU_BIG_ENDIAN for all fixed big endian archs").
Link: http://lkml.kernel.org/r/20180202154104.1522809-2-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As Peter points out, Doing a CALL+RET for just the decrement is a bit silly.
Fixes: d70f2a14b7 ("include/linux/sched/mm.h: uninline mmdrop_async(), etc")
Acked-by: Peter Zijlstra (Intel) <peterz@infraded.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently a number of Makefiles break when used with toolchains that
pass extra flags in CC and other cross-compile related variables (such
as --sysroot).
Thus we get this error when we use a toolchain that puts --sysroot in
the CC var:
~/src/linux/tools$ make iio
[snip]
iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory
#include <unistd.h>
^~~~~~~~~~
This occurs because we clobber several env vars related to
cross-compiling with lines like this:
CC = $(CROSS_COMPILE)gcc
Although this will point to a valid cross-compiler, we lose any extra
flags that might exist in the CC variable, which can break toolchains
that rely on them (for example, those that use --sysroot).
This easily shows up using a Yocto SDK:
$ . [snip]/sdk/environment-setup-cortexa8hf-neon-poky-linux-gnueabi
$ echo $CC
arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard
-mcpu=cortex-a8
--sysroot=[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi
$ echo $CROSS_COMPILE
arm-poky-linux-gnueabi-
$ echo ${CROSS_COMPILE}gcc
krm-poky-linux-gnueabi-gcc
Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost the
--sysroot and other flags that enable us to find the right libraries to
link against, so we can't find unistd.h and other libraries and headers.
Normally with the --sysroot flag we would find unistd.h in the sdk
directory in the sysroot:
$ find [snip]/sdk/sysroots -path '*/usr/include/unistd.h'
[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi/usr/include/unistd.h
The perf Makefile adds CC = $(CROSS_COMPILE)gcc if and only if CC is not
already set, and it compiles correctly with the above toolchain.
So, generalize the logic that perf uses in the common Makefile and
remove the manual CC = $(CROSS_COMPILE)gcc lines from each Makefile.
Note that this patch does not fix cross-compile for all the tools (some
have other bugs), but it does fix it for all except usb and acpi, which
still have other unrelated issues.
I tested both with and without the patch on native and cross-build and
there appear to be no regressions.
Link: http://lkml.kernel.org/r/20180107214028.23771-1-martin@martingkelly.com
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Pali Rohar <pali.rohar@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Lv Zheng <lv.zheng@intel.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers, a memory leak on non-blocking commits, a crash on color-eviction.
The is also meson and edid fixes, plus a fix for a doc warning.
-----BEGIN PGP SIGNATURE-----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=555h
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-02-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for 4.16. I contains fixes for deadlock on runtime suspend on few
drivers, a memory leak on non-blocking commits, a crash on color-eviction.
The is also meson and edid fixes, plus a fix for a doc warning.
* tag 'drm-misc-fixes-2018-02-21' of git://anongit.freedesktop.org/drm/drm-misc:
drm/tve200: fix kernel-doc documentation comment include
drm/meson: fix vsync buffer update
drm: Handle unexpected holes in color-eviction
drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA
drm/amdgpu: Fix deadlock on runtime suspend
drm/radeon: Fix deadlock on runtime suspend
drm/nouveau: Fix deadlock on runtime suspend
drm: Allow determining if current task is output poll worker
workqueue: Allow retrieval of current task's work struct
drm/atomic: Fix memleak on ERESTARTSYS during non-blocking commits
After resuming from suspend, the PCI device support must re-enable the
interrupt setting so that interrupts are actually delivered.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2018-02-20
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a memory leak in LPM trie's map_free() callback function, where
the trie structure itself was not freed since initial implementation.
Also a synchronize_rcu() was needed in order to wait for outstanding
programs accessing the trie to complete, from Yonghong.
2) Fix sock_map_alloc()'s error path in order to correctly propagate
the -EINVAL error in case of too large allocation requests. This
was just recently introduced when fixing close hooks via ULP layer,
fix from Eric.
3) Do not use GFP_ATOMIC in __cpu_map_entry_alloc(). Reason is that this
will not work with the recent __ptr_ring_init_queue_alloc() conversion
to kvmalloc_array(), where in case of fallback to vmalloc() that GFP
flag is invalid, from Jason.
4) Fix two recent syzkaller warnings: i) fix bpf_prog_array_copy_to_user()
when a prog query with a big number of ids was performed where we'd
otherwise trigger a warning from allocator side, ii) fix a missing
mlock precharge on arraymaps, from Daniel.
5) Two fixes for bpftool in order to avoid breaking JSON output when used
in batch mode, from Quentin.
6) Move a pr_debug() in libbpf in order to avoid having an otherwise
uninitialized variable in bpf_program__reloc_text(), from Jeremy.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Dangaard Brouer says:
====================
virtio_net: several bugs in XDP code for driver virtio_net
The virtio_net driver actually violates the original memory model of
XDP causing hard to debug crashes. Per request of John Fastabend,
instead of removing the XDP feature I'm fixing as much as possible.
While testing virtio_net with XDP_REDIRECT I found 4 different bugs.
Patch-1: not enough tail-room for build_skb in receive_mergeable()
only option is to disable XDP_REDIRECT in receive_mergeable()
Patch-2: XDP in receive_small() basically never worked (check wrong flag)
Patch-3: fix memory leak for XDP_REDIRECT in error cases
Patch-4: avoid crash when ndo_xdp_xmit is called on dev not ready for XDP
In the longer run, we should consider introducing a separate receive
function when attaching an XDP program, and also change the memory
model to be compatible with XDP when attaching an XDP prog.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When a driver implements the ndo_xdp_xmit() function, there is
(currently) no generic way to determine whether it is safe to call.
It is e.g. unsafe to call the drivers ndo_xdp_xmit, if it have not
allocated the needed XDP TX queues yet. This is the case for
virtio_net, which first allocates the XDP TX queues once an XDP/bpf
prog is attached (in virtnet_xdp_set()).
Thus, a crash will occur for virtio_net when redirecting to another
virtio_net device's ndo_xdp_xmit, which have not attached a XDP prog.
The sample xdp_redirect_map tries to attach a dummy XDP prog to take
this into account, but it can also easily fail if the virtio_net (or
actually underlying vhost driver) have not allocated enough extra
queues for the device.
Allocating more queue this is currently a manual config.
Hint for libvirt XML add:
<driver name='vhost' queues='16'>
<host mrg_rxbuf='off'/>
<guest tso4='off' tso6='off' ecn='off' ufo='off'/>
</driver>
The solution in this patch is to check that the device have loaded an
XDP/bpf prog before proceeding. This is similar to the check
performed in driver ixgbe.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
XDP_REDIRECT calling xdp_do_redirect() can fail for multiple reasons
(which can be inspected by tracepoints). The current semantics is that
on failure the driver calling xdp_do_redirect() must handle freeing or
recycling the page associated with this frame. This can be seen as an
optimization, as drivers usually have an optimized XDP_DROP code path
for frame recycling in place already.
The virtio_net driver didn't handle when xdp_do_redirect() failed.
This caused a memory leak as the page refcnt wasn't decremented on
failures.
The function __virtnet_xdp_xmit() did handle one type of failure,
when the xmit queue virtqueue_add_outbuf() is full, which "hides"
releasing a refcnt on the page. Instead the function __virtnet_xdp_xmit()
must follow API of xdp_do_redirect(), which on errors leave it up to
the caller to free the page, of the failed send operation.
Fixes: 186b3c998c ("virtio-net: support XDP_REDIRECT")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When configuring virtio_net to use the code path 'receive_small()',
in-order to get correct XDP_REDIRECT support, I discovered TCP packets
would get silently dropped when loading an XDP program action XDP_PASS.
The bug seems to be that receive_small() when XDP is loaded check that
hdr->hdr.flags is zero, which seems wrong as hdr.flags contains the
flags VIRTIO_NET_HDR_F_* :
#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 /* Use csum_start, csum_offset */
#define VIRTIO_NET_HDR_F_DATA_VALID 2 /* Csum is valid */
TCP got dropped as it had the VIRTIO_NET_HDR_F_DATA_VALID flag set.
The flags that are relevant here are the VIRTIO_NET_HDR_GSO_* flags
stored in hdr->hdr.gso_type. Thus, the fix is just check that none of
the gso_type flags have been set.
Fixes: bb91accf27 ("virtio-net: XDP support for small buffers")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The virtio_net code have three different RX code-paths in receive_buf().
Two of these code paths can handle XDP, but one of them is broken for
at least XDP_REDIRECT.
Function(1): receive_big() does not support XDP.
Function(2): receive_small() support XDP fully and uses build_skb().
Function(3): receive_mergeable() broken XDP_REDIRECT uses napi_alloc_skb().
The simple explanation is that receive_mergeable() is broken because
it uses napi_alloc_skb(), which violates XDP given XDP assumes packet
header+data in single page and enough tail room for skb_shared_info.
The longer explaination is that receive_mergeable() tries to
work-around and satisfy these XDP requiresments e.g. by having a
function xdp_linearize_page() that allocates and memcpy RX buffers
around (in case packet is scattered across multiple rx buffers). This
does currently satisfy XDP_PASS, XDP_DROP and XDP_TX (but only because
we have not implemented bpf_xdp_adjust_tail yet).
The XDP_REDIRECT action combined with cpumap is broken, and cause hard
to debug crashes. The main issue is that the RX packet does not have
the needed tail-room (SKB_DATA_ALIGN(skb_shared_info)), causing
skb_shared_info to overlap the next packets head-room (in which cpumap
stores info).
Reproducing depend on the packet payload length and if RX-buffer size
happened to have tail-room for skb_shared_info or not. But to make
this even harder to troubleshoot, the RX-buffer size is runtime
dynamically change based on an Exponentially Weighted Moving Average
(EWMA) over the packet length, when refilling RX rings.
This patch only disable XDP_REDIRECT support in receive_mergeable()
case, because it can cause a real crash.
IMHO we should consider NOT supporting XDP in receive_mergeable() at
all, because the principles behind XDP are to gain speed by (1) code
simplicity, (2) sacrificing memory and (3) where possible moving
runtime checks to setup time. These principles are clearly being
violated in receive_mergeable(), that e.g. runtime track average
buffer size to save memory consumption.
In the longer run, we should consider introducing a separate receive
function when attaching an XDP program, and also change the memory
model to be compatible with XDP when attaching an XDP prog.
Fixes: 186b3c998c ("virtio-net: support XDP_REDIRECT")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJajJahAAoJEEg/ir3gV/o+PTQIALd4/l5VEU1vWqXp6PPaIaRP
fCt4CKXkeIozyOhkiaYLcNAvPnsJRi54a/PGyUbHwxadkjuOhS8WETyQwMf8gbKF
g+LTDseqKjWcu6fUMqe7TmjrNHSo2VErjOjHw1+7emKSkBZuc8zBBND9PqHtOQY6
f1KoUY6IBs22dwqzynxkC5A62VQbTYd0FPnf1n9wN8ubFXSb37KUgKoW4kmMFmLe
JsYEcsAKxpfepnP+EYLyDrVcT1LA9edi5DI5uxSfNgas6bTtjRPhtyZCznDF8rly
jEWv3O2c+HhchuysoACTLiTllviHGj0Myv+rGb0ouhjZWMtulgPPQ04lbYjjr84=
=uF0v
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2018-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2018-02-20
The following pull request includes some fixes for the mlx5 core and
netdevice driver.
Please pull and let me know if there's any issue.
-stable 4.10.y:
('net/mlx5e: Fix loopback self test when GRO is off')
-stable 4.12.y:
('net/mlx5e: Specify numa node when allocating drop rq')
-stable 4.13.y:
('net/mlx5e: Verify inline header size do not exceed SKB linear size')
-stable 4.15.y:
('net/mlx5e: Fix TCP checksum in LRO buffers')
('net/mlx5: Fix error handling when adding flow rules')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains large batch with Netfilter fixes for
your net tree, mostly due to syzbot report fixups and pr_err()
ratelimiting, more specifically, they are:
1) Get rid of superfluous unnecessary check in x_tables before vmalloc(),
we don't hit BUG there anymore, patch from Michal Hock, suggested by
Andrew Morton.
2) Race condition in proc file creation in ipt_CLUSTERIP, from Cong Wang.
3) Drop socket lock that results in circular locking dependency, patch
from Paolo Abeni.
4) Drop packet if case of malformed blob that makes backpointer jump
in x_tables, from Florian Westphal.
5) Fix refcount leak due to race in ipt_CLUSTERIP in
clusterip_config_find_get(), from Cong Wang.
6) Several patches to ratelimit pr_err() for x_tables since this can be
a problem where CAP_NET_ADMIN semantics can protect us in untrusted
namespace, from Florian Westphal.
7) Missing .gitignore update for new autogenerated asn1 state machine
for the SNMP NAT helper, from Zhu Lingshan.
8) Missing timer initialization in xt_LED, from Paolo Abeni.
9) Do not allow negative port range in NAT, also from Paolo.
10) Lock imbalance in the xt_hashlimit rate match mode, patch from
Eric Dumazet.
11) Initialize workqueue before timer in the idletimer match,
from Eric Dumazet.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commits adding PCI IDs for Intel Braswell and Kaby Lake PCH-H lacked the
respective Kconfig and Documentation/i2c/busses/i2c-i801 change. Add
them now.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
One I2C bus on my Atom E3845 board has been broken since 4.9.
It has two devices, both declared by ACPI and with built-in drivers.
There are two back-to-back transactions originating from the kernel, one
targeting each device. The first transaction works, the second one locks
up the I2C controller. The controller never recovers.
These kernel logs show up whenever an I2C transaction is attempted after
this failure.
i2c-designware-pci 0000:00:18.3: timeout in disabling adapter
i2c-designware-pci 0000:00:18.3: timeout waiting for bus ready
Waiting for the I2C controller status to indicate that it is enabled
before programming it fixes the issue.
I have tested this patch on 4.14 and 4.15.
Fixes: commit 2702ea7dbe ("i2c: designware: wait for disable/enable only if necessary")
Cc: linux-stable <stable@vger.kernel.org> #4.13+
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The DOC: line acts as an identifier for the :doc: include. Fixes:
./drivers/gpu/drm/tve200/tve200_drv.c:1: warning: no structured comments found
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220142008.9330-1-jani.nikula@intel.com
So far, if the filter was too large to fit in the allocated skb, the
kernel did not return any error and stopped dumping. Modify the dumper
so that it returns -EMSGSIZE when a filter fails to dump and it is the
first filter in the skb. If we are not first, we will get a next chance
with more room.
I understand this is pretty near to being an API change, but the
original design (silent truncation) can be considered a bug.
Note: The error case can happen pretty easily if you create a filter
with 32 actions and have 4kb pages. Also recent versions of iproute try
to be clever with their buffer allocation size, which in turn leads to
Signed-off-by: Roman Kapl <code@rkapl.cz>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This uses the EDID info from the Sony PlayStation VR headset,
when connected directly, to mark it as non-desktop.
Since the connection box (product id b403) defaults to HDMI
pass-through to the TV, it is not marked as non-desktop.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This uses the EDID info from Lenovo Explorer (LEN-b800), Acer AH100
(ACR-7fce), and Samsung Odyssey (SEC-144a) to mark them as non-desktop.
The other entries are for the HP Windows Mixed Reality Headset (HPN-3515),
the Fujitsu Windows Mixed Reality headset (FUJ-1970), the Dell Visor
(DEL-7fce), and the ASUS HC102 (AUS-c102). They are not tested with real
hardware, but listed as HMD monitors alongside the tested headsets in the
Microsoft HololensSensors driver package.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This uses the EDID info from Oculus Rift DK1 (OVR-0001), DK2 (OVR-0003),
and CV1 (OVR-0004) to mark them as non-desktop.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
. it fixes potential issues[1] by using monotonic timestamp
instead of 'struct timeval'
. correct HDMI_I2S_PIN_SEL_1 definition and setting value.
. fix bit shift typo of FIMC register definition
- two cleanups
. remove unnecessary error messages
. remove exynos_drm_rotator.h file
[1] https://patchwork.kernel.org/patch/10170205/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QWZV
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
- three fixeups
. it fixes potential issues[1] by using monotonic timestamp
instead of 'struct timeval'
. correct HDMI_I2S_PIN_SEL_1 definition and setting value.
. fix bit shift typo of FIMC register definition
- two cleanups
. remove unnecessary error messages
. remove exynos_drm_rotator.h file
[1] https://patchwork.kernel.org/patch/10170205/
* tag 'exynos-drm-fixes-for-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1
drm/exynos: remove exynos_drm_rotator.h
drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions
drm/exynos: fix comparison to bitshift when dealing with a mask
drm/exynos: g2d: use monotonic timestamps
If building match list or adding existing fg fails when
node is locked, function returned without unlocking it.
This happened if node version changed or adding existing fg
returned with EAGAIN after jumping to search_again_locked label.
Fixes: bd71b08ec2 ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
First use of drop counters happens in esw_apply_vport_conf function,
while they are allocated later in the flow. Fix that by moving
esw_vport_create_drop_counters function to be called before the first use.
Fixes: b8a0dbe3a9 ("net/mlx5e: E-switch, Add steering drop counters")
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
We can't allow only some of the rules sharing an FTE to ask for
header re-write, add it to the conflicting action checks.
Fixes: 0d235c3fab ('net/mlx5: Add hash table to search FTEs in a flow-group')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The adapter uses the cache_line_128byte setting to set the bounds for
end padding. On systems where the cacheline size is greater than 128B
use 128B instead of the default of 64B. This results in fewer partial
cacheline writes. There's a 50% chance it will pad to the end of a 256B
cache line vs only 25% when using 64B.
Fixes: f32f5bd2eb ("net/mlx5: Configure cache line size for start and end padding")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When allocating a drop rq, no numa node is explicitly set which means
allocations are done on node zero. This is not necessarily the nearest
numa node to the HCA, and even worse, might even be a memoryless numa
node.
Choose the numa_node given to us by the pci device in order to properly
allocate the coherent dma memory instead of assuming zero is valid.
Fixes: 556dd1b9c3 ("net/mlx5e: Set drop RQ's necessary parameters only")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This isn't supported when we emulate eswitch vlan push action which
is the current state of things.
Fixes: 8b32580df1 ('net/mlx5e: Add TC vlan action for SRIOV offloads')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Fix these gcc warnings on drivers/net/ethernet/mellanox/mlx5:
[..]/core/lib/clock.c:454:6: warning: no previous prototype for 'mlx5_init_clock' [-Wmissing-prototypes]
[..]/core/lib/clock.c:510:6: warning: no previous prototype for 'mlx5_cleanup_clock' [-Wmissing-prototypes]
[..]/core/en_main.c:3141:5: warning: no previous prototype for 'mlx5e_setup_tc' [-Wmissing-prototypes]
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Driver tries to copy at least MLX5E_MIN_INLINE bytes into the control
segment of the WQE. It assumes that the linear part contains at least
MLX5E_MIN_INLINE bytes, which can be wrong.
Cited commit verified that driver will not copy more bytes into the
inline header part that the actual size of the packet. Re-factor this
check to make sure we do not exceed the linear part as well.
This fix is aligned with the current driver's assumption that the entire
L2 will be present in the linear part of the SKB.
Fixes: 6aace17e64 ("net/mlx5e: Fix inline header size for small packets")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When GRO is off, the transport header pointer in sk_buff is
initialized to network's header.
To find the udp header, instead of using udp_hdr() which assumes
skb_network_header was set, manually calculate the udp header offset.
Fixes: 0952da791c ("net/mlx5e: Add support for loopback selftest")
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When receiving an LRO packet, the checksum field is set by the hardware
to the checksum of the first coalesced packet. Obviously, this checksum
is not valid for the merged LRO packet and should be fixed. We can use
the CQE checksum which covers the checksum of the entire merged packet
TCP payload to help us calculate the checksum incrementally.
Tested by sending IPv4/6 traffic with LRO enabled, RX checksum disabled
and watching nstat checksum error counters (in addition to the obvious
bandwidth drop caused by checksum errors).
This bug is usually "hidden" since LRO packets would go through the
CHECKSUM_UNNECESSARY flow which does not validate the packet checksum.
It's important to note that previous to this patch, LRO packets provided
with CHECKSUM_UNNECESSARY are indeed packets with a correct validated
checksum (even though the checksum inside the TCP header is incorrect),
since the hardware LRO aggregation is terminated upon receiving a packet
with bad checksum.
Fixes: e586b3b0ba ("net/mlx5: Ethernet Datapath files")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Fixes a GCC maybe-uninitialized warning introduced by 48cca7e44f.
"text" is only initialized inside the if statement so only print debug
info there.
Fixes: 48cca7e44f ("libbpf: add support for bpf_call")
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
After introduction of commit d0869c0071, there were some instances of
RX queue entries from a previous session (before the device was closed
and reopened) returned to the NAPI polling routine. Since the corresponding
socket buffers were freed, this resulted in a panic on reopen. Include
a check for a NULL skb here to avoid this.
Fixes: d0869c0071 ("ibmvnic: Clean RX pool buffers during device close")
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sbi_ prefix would seem to indicate an SBI interface, and save is not
very specific. After applying this patch, reading head.S makes more sense.
Signed-off-by: Michael Clark <michaeljclark@mac.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Interrupt is allowed during exception handling.
There are warning messages if the kernel enables the configuration
'CONFIG_DEBUG_ATOMIC_SLEEP=y'.
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:23
in_atomic(): 0, irqs_disabled(): 1, pid: 43, name: ash
CPU: 0 PID: 43 Comm: ash Tainted: G W 4.15.0-rc8-00089-g89ffdae-dirty #17
Call Trace:
[<000000009abb1587>] walk_stackframe+0x0/0x7a
[<00000000d4f3d088>] ___might_sleep+0x102/0x11a
[<00000000b1fd792a>] down_read+0x18/0x28
[<000000000289ec01>] do_page_fault+0x86/0x2f6
[<00000000012441f6>] _do_fork+0x1b4/0x1e0
[<00000000f46c3e3b>] ret_from_syscall+0xa/0xe
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
These three kconfig cleanups were found by ulfalyzer. They're all
things we were selecting that were undefined, either because they'd been
remove upstream or are part of a future RISC-V submission.
* ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE is obselete.
* RISCV_IRQ_INTC is the old name for our interrupt controller driver,
it'll be changed for the final submission and doesn't exist now.
* ARCH_WANT_OPTIONAL_GPIOLIB is obselete.
The ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE symbol was removed in
commit 51a021244b ("atomic64: no need for
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE").
Remove the ARCH_HAS_ATOMIC64_DEC_IS_POSITIVE select from RISCV.
Discovered with the
https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py
script.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The RISCV_IRQ_INTC configuration symbol is undefined, but RISCV selects
it. Quoting Palmer Dabbelt:
It looks like this slipped through, the symbol has been renamed
RISCV_INTC.
No RISCV_INTC configuration symbol has been merged either. Just remove
the RISCV_IRQ_INTC select for now.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The ARCH_WANT_OPTIONAL_GPIOLIB symbol was removed in commit 65053e1a77
("gpio: delete ARCH_[WANTS_OPTIONAL|REQUIRE]_GPIOLIB"). GPIOLIB should
just be selected explicitly if needed.
Remove the ARCH_WANT_OPTIONAL_GPIOLIB select from RISCV.
See commit 0145071b33 ("x86: Do away with
ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB") and commit da9a1c6767 ("arm64: do
away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB") as well.
Discovered with the
https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py
script.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=J+hj
-----END PGP SIGNATURE-----
Merge tag 'leds_for-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED maintainer update:
"LED update to MAINTAINERS, to admit the reality.
Message from Richard:
"I've been looking at some of the emails but not needed to be
involved for a while now, you're doing fine without me!" [0]
Many thanks to Richard for his work as a founder of the LED
subsystem!"
[0] https://lkml.org/lkml/2018/2/18/145
* tag 'leds_for-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
MAINTAINERS: Remove Richard Purdie from LED maintainers
BNXT_RE_FLAG_TASK_IN_PROG doesn't handle multiple work
requests posted together. Track schedule of multiple
workqueue items by maintaining a per device counter
and proceed with IB dereg only if this counter is zero.
flush_workqueue is no longer required from
NETDEV_UNREGISTER path.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
During driver unload, the driver proceeds with cleanup
without waiting for the scheduled events. So the device
pointers get freed up and driver crashes when the events
are scheduled later.
Flush the bnxt_re_task work queue before starting
device removal.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid system crash when destroy_qp is invoked while
the driver is processing the poll_cq. Synchronize these
functions using the cq_lock.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Driver leaves the QP memory pinned if QP create command
fails from the FW. Avoids this scenario by adding a proper
exit path if the FW command fails.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
More testing needs to be done before enabling this feature.
Disabling the feature temporarily
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Shakeel Butt