Again this is a lot of common code we can unify
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we have no speed set at some point then we should not raise DTR/RTS at
that point when opening as the tty is not ready
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Start sucking more commonality out of the drivers into a single piece of
core code.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Normalise them so we can use the common helpers later on
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Switch generic_serial to do port count locking via the tty_port structure
ready for moving to a common port wait routine. Keep the old driver lock for
internal calling so we don't risk messing up the drivers below until we
are ready.
Still needs kref conversions
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This helps set the basis for moving block_til_ready into common code. We also
introduce a tty_port_hangup helper as this will also be generally needed.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This moves another per device special out of what should be shared open
wait paths into private methods
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was an alloc/clear wrapper but makes even less sense now it uses
kzalloc. Kill it off.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the first step to generalising the various pieces of waiting logic
duplicated in all sorts of serial drivers.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add device funtion for usb serial console, so we can open /dev/console
when we use a usb serial device as console.
(Typecast removed as noted by Sergei Shtylyov)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
this happening again by making use of 'const'.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
scribble on its own reference structures.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fs/devpts/inode.c:324: warning: 'compare_init_pts_sb' defined but not used
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
USB serial has always had races where the tty port usage count can hit zero
during a receive event. The internal locking is a mutex so we can't use
that in the IRQ handlers.
With krefs we can tackle this differently but we still need to be careful.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch causes "bell" (^G) characters (invoked when the input buffer
is full) to be immediately output rather than filling the echo buffer.
This is especially a problem when the tty is stopped and buffers fill, since
the bells do not serve their purpose of immediate notification that the
buffer cannot take further input, and they will flush all at once when the
tty is restarted.
Signed-off-by: Joe Peterson <joe@skyrush.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the handling of input characters when the tty buffer is full or nearly
full. This includes tests that are done in n_tty_receive_char() and handling
of PARMRK.
Problems with the buffer-full tests done in receive_char() caused characters to
be lost at times when the buffer(s) filled. Also, these full conditions
would often only be detected with echo on, and PARMRK was not accounted for
properly in all cases. One symptom of these problems, in addition to lost
characters, was early termination from unix commands like tr and cat when
^Q was used to break from a stopped tty with full buffers (note that breaking
out was often previously not possible, due to the pty getting in "gridlock",
which will be addressed in another patch). Note space is always reserved
at the end of the buffer for a newline (or EOF/EOL) in canonical mode.
Signed-off-by: Joe Peterson <joe@skyrush.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix process_output_block to detect continuation characters correctly
and to handle control characters even when O_OLCUC is enabled. Make
similar change to do_output_char().
Signed-off-by: Joe Peterson <joe@skyrush.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have special case logic for resizing pty/tty pairs. We also have a per
driver resize method so for the pty case we should use it.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixed sparse warning:
drivers/char/tty_io.c:1216:19: warning: symbol 'tty_driver_lookup_tty' was not declared. Should it be static?
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Just nail the oddments now while this code is being touched
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changelog [v2]:
- Add note indicating strict isolation is not possible unless all
mounts of devpts use the 'newinstance' mount option.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To support containers, allow multiple instances of devpts filesystem, such
that indices of ptys allocated in one instance are independent of ptys
allocated in other instances of devpts.
But to preserve backward compatibility, enable this support for multiple
instances only if:
- CONFIG_DEVPTS_MULTIPLE_INSTANCES is set to Y, and
- '-o newinstance' mount option is specified while mounting devpts
To use multi-instance mount, a container startup script could:
$ ns_exec -cm /bin/bash
$ umount /dev/pts
$ mount -t devpts -o newinstance lxcpts /dev/pts
$ mount -o bind /dev/pts/ptmx /dev/ptmx
$ /usr/sbin/sshd -p 1234
where 'ns_exec -cm /bin/bash' is calls clone() with CLONE_NEWNS flag and execs
/bin/bash in the child process. A pty created by the sshd is not visible in
the original mount of /dev/pts.
USER-SPACE-IMPACT:
- See Documentation/fs/devpts.txt (included in next patch) for user-
space impact in multi-instance and mixed-mode operation.
TODO:
- Update mount(8), pts(4) man pages. Highlight impact of not
redirecting /dev/ptmx to /dev/pts/ptmx after a multi-instance mount.
Changelog[v6]:
- [Dave Hansen] Use new get_init_pts_sb() interface
- [Serge Hallyn] Don't bother displaying 'newinstance' in show_options
- [Serge Hallyn] Use macros (PARSE_REMOUNT/PARSE_MOUNT) instead of 0/1.
- [Serge Hallyn] Check error return from get_sb_single() (now
get_init_pts_sb())
- devpts_pty_kill(): don't dput error dentries
Changelog[v5]:
- Move get_sb_ref() definition to earlier patch
- Move usage info to Documentation/filesystems/devpts.txt (next patch)
- Make ptmx node even in init_pts_ns, now that default mode is 0000
(defined in earlier patch, enabled here).
- Cache ptmx dentry and use to update mode during remount
(defined in earlier patch, enabled here).
- Bugfix: explicitly ignore newinstance on remount (if newinstance was
specified on remount of initial mount, it would be ignored but
/proc/mounts would imply that the option was set)
Changelog[v4]:
- Update patch description to address H. Peter Anvin's comments
- Consolidate multi-instance mode code under new config token,
CONFIG_DEVPTS_MULTIPLE_INSTANCE.
- Move usage-details from patch description to
Documentation/fs/devpts.txt
Changelog[v3]:
- Rename new mount option to 'newinstance'
- Create ptmx nodes only in 'newinstance' mounts
- Bugfix: parse_mount_options() modifies @data but since we need to
parse the @data twice (once in devpts_get_sb() and once during
do_remount_sb()), parse a local copy of @data in devpts_get_sb().
(restructured code in devpts_get_sb() to fix this)
Changelog[v2]:
- Support both single-mount and multiple-mount semantics and
provide '-onewmnt' option to select the semantics.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
See comments in the function header for details. The new interface will
be used in a follow-on patch.
Changelog [v2]:
[Dave Hansen] Replace get_sb_ref() in fs/super.c with get_init_pts_sb()
and make the new interface private to devpts
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/dev/ptmx is closely tied to the devpts filesystem. An open of /dev/ptmx,
allocates the next pty index and the associated device shows up in the
devpts fs as /dev/pts/n.
Wih multiple instancs of devpts filesystem, during an open of /dev/ptmx
we would be unable to determine which instance of the devpts is being
accessed.
So we move the 'ptmx' node into /dev/pts and use the inode of the 'ptmx'
node to identify the superblock and hence the devpts instance. This patch
adds ability for the kernel to internally create the [ptmx, c, 5:2] device
when mounting devpts filesystem. Since the ptmx node in devpts is new and
may surprise some userspace scripts, the default permissions for the new
node is 0000. These permissions can be changed either using chmod or by
remounting with the new '-o ptmxmode=0666' mount option.
Changelog[v5]:
- [Serge Hallyn bugfix]: Letting new_inode() assign inode number to
ptmx can collide with hand-assigning inode numbers to ptys. So,
hand-assign specific inode number to ptmx node also.
- [Serge Hallyn]: Maybe safer to grab root dentry mutex while creating
ptmx node
- [Bugfix with Serge Hallyn] Replace lookup_one_len() in mknod_ptmx()
wih d_alloc_name() (lookup during ->get_sb() locks up system). To
simplify patchset, fold the ptmx_dentry patch into this.
Changelog[v4]:
- Change default permissions of pts/ptmx node to 0000.
- Move code for ptmxmode under #ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES.
Changelog[v3]:
- Rename ptmx_mode to ptmxmode (for consistency with 'newinstance')
Changelog[v2]:
- [H. Peter Anvin] Remove mknod() system call support and create the
ptmx node internally.
Changelog[v1]:
- Earlier version of this patch enabled creating /dev/pts/tty as
well. As pointed out by Al Viro and H. Peter Anvin, that is not
really necessary.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move code to parse mount options into a separate function so it can
(later) be shared between mount and remount operations.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With support for multiple mounts of devpts, the 'config' structure really
represents per-mount options rather than config parameters. Rename 'config'
structure to 'pts_mount_opts' and store it in the super-block.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To enable multiple mounts of devpts, 'allocated_ptys' must be a per-mount
variable rather than a global variable. Move 'allocated_ptys' into the
super_block's s_fs_info.
Changelog[v2]:
Define and use DEVPTS_SB() wrapper.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the 'devpts_root' global variable and find the root dentry using
the super_block. The super-block can be found from the device inode, using
the new wrapper, pts_sb_from_inode().
Changelog: This patch is based on an earlier patchset from Serge Hallyn
and Matt Helsley.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes the loss of echoed (and other ldisc-generated characters) when
the tty is stopped or when the driver output buffer is full (happens
frequently for input during continuous program output, such as ^C)
and removes the Big Kernel Lock from the N_TTY line discipline.
Adds an "echo buffer" to the N_TTY line discipline that handles all
ldisc-generated output (including echoed characters). Along with the
loss of characters, this also fixes the associated loss of sync between
tty output and the ldisc state when characters cannot be immediately
written to the tty driver.
The echo buffer stores (in addition to characters) state operations that need
to be done at the time of character output (like management of the column
position). This allows echo to cooperate correctly with program output,
since the ldisc state remains consistent with actual characters written.
Since the echo buffer code now isolates the tty column state code
to the process_out* and process_echoes functions, we can remove the
Big Kernel Lock (BKL) and replace it with mutex locks.
Highlights are:
* Handles echo (and other ldisc output) when tty driver buffer is full
- continuous program output can block echo
* Saves echo when tty is in stopped state (e.g. ^S)
- (e.g.: ^Q will correctly cause held characters to be released for output)
* Control character pairs (e.g. "^C") are treated atomically and not
split up by interleaved program output
* Line discipline state is kept consistent with characters sent to
the tty driver
* Remove the big kernel lock (BKL) from N_TTY line discipline
Signed-off-by: Joe Peterson <joe@skyrush.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add spin_lock_irqsave() when receive and transfer data.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug description:
The IRDA receiver may can't receiving any more after processed some signals.
To duplicate this issue is put three IRDA devices together, one blackfin,
two none blackfin, they will detect each other. Let one none blackfin devices
irdaping the blackfin devices, when it stopped print out ping information,
it is the time that blackfin stoped receiving, the time is random.
The related register bit is OK, the other devices is sending data continuously.
But no interrupt come.
Fixing:
I tried Michael's suggestion that request the UARTx error interrupt, and reset
the IRDA when found FE error. This method helps much, but it can't completely
avoid stop.
Reset the IRDA before every time sending the data is more safe.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (34 commits)
nfsd race fixes: jfs
nfsd race fixes: reiserfs
nfsd race fixes: ext4
nfsd race fixes: ext3
nfsd race fixes: ext2
nfsd/create race fixes, infrastructure
filesystem notification: create fs/notify to contain all fs notification
fs/block_dev.c: __read_mostly improvement and sb_is_blkdev_sb utilization
kill ->dir_notify()
filp_cachep can be static in fs/file_table.c
fix f_count description in Documentation/filesystems/files.txt
make INIT_FS use the __RW_LOCK_UNLOCKED initialization
take init_fs to saner place
kill vfs_permission
pass a struct path * to may_open
kill walk_init_root
remove incorrect comment in inode_permission
expand some comments (d_path / seq_path)
correct wrong function name of d_put in kernel document and source comment
fix switch_names() breakage in short-to-short case
...
... and the same for reiserfs. The difference here is that we need
insert_inode_locked4() to match iget5_locked().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* make ext2_new_inode() put the inode into icache in locked state
* do not unlock until the inode is fully set up; otherwise nfsd
might pick it in half-baked state.
* make sure that ext2_new_inode() does *not* lead to two inodes with the
same inumber hashed at the same time; otherwise a bogus fhandle coming
from nfsd might race with inode creation:
nfsd: iget_locked() creates inode
nfsd: try to read from disk, block on that.
ext2_new_inode(): allocate inode with that inumber
ext2_new_inode(): insert it into icache, set it up and dirty
ext2_write_inode(): get the relevant part of inode table in cache,
set the entry for our inode (and start writing to disk)
nfsd: get CPU again, look into inode table, see nice and sane on-disk
inode, set the in-core inode from it
oops - we have two in-core inodes with the same inumber live in icache,
both used for IO. Welcome to fs corruption...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Alan Cox