Commit Graph

38 Commits

Author SHA1 Message Date
Axel Lin 871d337255 net/can: convert drivers/net/can/* to use module_platform_driver()
This patch converts the drivers in drivers/net/can/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.

Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Bhupesh Sharma <bhupesh.sharma@st.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Kurt Van Dijck <kurt.van.dijck@eia.be>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 00:25:05 -05:00
Marc Kleine-Budde f861c2b80c can: remove references to berlios mailinglist
The BerliOS project, which currently hosts our mailinglist, will
close with the end of the year. Now take the chance and remove all
occurrences of the mailinglist address from the source files.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17 19:22:46 -04:00
Marc Kleine-Budde 6388b39614 can: at91_can: add support for the AT91SAM9X5 SOCs
The AT91SAM9X5 SOCs have a similar CAN core, but they only have 8 compared
to 16 mailboxes on the AT91SAM9263 SOC. Another difference is that the bits
defining the state of the CAN core are cleared on read, thus the driver
has to derive the state by looking at the error counters.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2011-06-06 14:50:57 +02:00
Marc Kleine-Budde 07a648e668 can: at91_can: register mb0 sysfs entry only on at91sam9263
This patch prepares the driver for the at91sam9X5 processors,
which don't have the mb0 bug.
(See commit 3a5655a5b5 for more details.)

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2011-06-06 14:20:55 +02:00
Marc Kleine-Budde d3d47264a3 can: at91_can: add id_table and convert prime mailbox constats to functions
This is the second of two patches converting the at91_can driver from a
compile time mailbox setup to a dynamic one.

This patch first adds a id_table to the platform driver. Depending on the
driver_data the constants for the mailbox setup is selected. Then all
remaining prime mailbox constants are converted to functions, using the
run time selected mailbox constants.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2011-06-06 14:20:54 +02:00
Marc Kleine-Budde 79008997e2 can: at91_can: convert derived mailbox constants into functions
This is the first of two patches converting the at91_can driver from a
compile time mailbox setup to a dynamic one.

This patch converts all derived mailbox constants to functions.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2011-06-06 11:02:17 +02:00
Marc Kleine-Budde b049994d0f can: at91_can: rename AT91_MB_RX_MASK to AT91_IRQ_MB_RX
... and use it for AT91_NEXT_MB_MASK,
AT91_IRQ_MB_RX and AT91_IRQ_MB_RX, too.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2011-06-06 11:02:16 +02:00
Marc Kleine-Budde 267cbe047c can: at91_can: directly define AT91_MB_RX_LAST
...instead of deriving it from AT91_MB_RX_FIRST and AT91_MB_RX_NUM.
This removes a level of computation, when switching the driver from
compile time constants to runtime values.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2011-06-06 11:01:32 +02:00
Marc Kleine-Budde 9c2e0a6d2f can: at91_can: let get_tx_* functions return unsigned int
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2011-06-06 11:00:10 +02:00
Marc Kleine-Budde e14ee40bec can: at91_can: don't copy data to rx'ed RTR frames
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2011-06-06 11:00:10 +02:00
Marc Kleine-Budde 5613fff2dc can: at91_can: fix comment about priv->tx_next
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2011-06-06 11:00:10 +02:00
Marc Kleine-Budde 44d8566657 can: at91_can: don't align struct definitions
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2011-06-06 11:00:09 +02:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Vasiliy Kulikov fef52b0171 net: can: at91_can: world-writable sysfs files
Don't allow everybody to write to mb0_id file.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-04 13:06:27 -08:00
Marc Kleine-Budde 3a5655a5b5 can: at91_can: make can_id of mailbox 0 configurable
Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in
"AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox
0 may be send under certain conditions (even if disabled or in rx mode).

The workaround in the errata suggests not to use the mailbox and load it
with an unused identifier.

This patch implements the second part of the workaround. A sysfs entry
"mb0_id" is introduced. While the interface is down it can be used to
configure the can_id of mailbox 0. The default value id 0x7ff.

In order to use an extended can_id add the CAN_EFF_FLAG (0x80000000U)
to the can_id. Example:

- standard id 0x7ff:
echo 0x7ff      > /sys/class/net/can0/mb0_id

- extended id 0x1fffffff:
echo 0x9fffffff > /sys/class/net/can0/mb0_id

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
For the Documentation-part:
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-01-24 14:56:37 +01:00
Marc Kleine-Budde 9e0a2d1ca3 can: at91_can: don't use mailbox 0
Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in
"AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox
0 may be send under certain conditions (even if disabled or in rx mode).

The workaround in the errata suggests not to use the mailbox and load it
with a unused identifier.

This patch implements the first part of the workaround, it updates
AT91_MB_RX_NUM and AT91_MB_RX_FIRST (and the inline documentation)
so that mailbox 0 stays unused.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
2011-01-24 13:24:30 +01:00
Marc Kleine-Budde 0909c1ec6f can: at91_can: clean up usage of AT91_MB_RX_FIRST and AT91_MB_RX_NUM
This patch cleans up the usage of two macros which specify the mailbox
usage. AT91_MB_RX_FIRST and AT91_MB_RX_NUM define the first and the
number of RX mailboxes. The current driver uses these variables in an
unclean way; assuming that AT91_MB_RX_FIRST is 0;

This patch cleans up the usage of these macros, no longer assuming
AT91_MB_RX_FIRST == 0.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2011-01-24 13:22:02 +01:00
Hans J. Koch 3e9ebd3cf4 netdev: can: Change mail address of Hans J. Koch
My old mail address doesn't exist anymore. This changes all occurrences
to my new address.

Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30 16:49:38 -07:00
Marc Kleine-Budde 00389b0820 can: at91_can: add KBUILD_MODNAME to bittiming constant
While there replace all usage of self defined DRV_NAME by KBUILD_MODNAME.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 14:47:52 -07:00
Marc Kleine-Budde 882055c838 can: at91_can: convert dev_<level> printing to netdev_<level>
While there, remove "printk()" on driver loading.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 14:47:51 -07:00
Marc Kleine-Budde 7672fe7373 can: at91_can: convert readl, writel their __raw pendants
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 14:47:51 -07:00
Marc Kleine-Budde b156fd0483 can: at91_can: set bittiming in chip_start
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 14:47:50 -07:00
Marc Kleine-Budde 33a6f298c2 can: at91_can: implement and use at91_get_berr_counter
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 14:47:50 -07:00
Marc Kleine-Budde a9d992ecb3 can: at91_can: fix section mismatch warning
...by adding the correct annotation "__devinit" to the driver's probe
function.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 14:47:49 -07:00
Marc Kleine-Budde b61f674051 can: at91_can: fix compiler warning in at91_irq_err_state
This patch fixes the following compiler warning:

drivers/net/can/at91_can.c: In function 'at91_irq_err_state':
drivers/net/can/at91_can.c:779: warning: 'reg_ier' may be used uninitialized in this function
drivers/net/can/at91_can.c:779: warning: 'reg_idr' may be used uninitialized in this function

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 14:47:49 -07:00
Marc Kleine-Budde 759a6c768d can: at91_can: fix use after free of priv
The priv is part of the memory allocated by alloc_candev().
This patch moved the free it after last usage of priv.

While there convert all free_netdev() to free_candev() (which is currently
just a wrapper around free_netdev()) to be symetrically with the allocation
via alloc_candev().

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 14:47:48 -07:00
Marc Kleine-Budde 8a0e0a49b0 can: at91_can: fix reception of extended frames
The AT91_MID_MIDE bit must be set in order to receive extended frames.
The reception of an extended frame sets this bit, while reception of
standard frames resets it. This results in some lost extended frames in
an extended ID only environment. But leads to unpredictable lost
extended ID frames in a mixed environment.

The problem is fixed by setting the AT91_MID_MIDE after reception of a
CAN frame.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 14:47:48 -07:00
Marc Kleine-Budde dbe91325c2 can: at91_can: use correct bit to enable CAN_CTRLMODE_3_SAMPLES
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 14:47:47 -07:00
Eric Dumazet 1ae5dc342a net: trans_start cleanups
Now that core network takes care of trans_start updates, dont do it
in drivers themselves, if possible. Drivers can avoid one cache miss
(on dev->trans_start) in their start_xmit() handler.

Exceptions are NETIF_F_LLTX drivers

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 05:01:31 -07:00
Eric Dumazet 127aa0e14b drivers: net: last_rx elimination
Network drivers do not have to update last_rx, unless they need it for
their private use.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 03:32:43 -07:00
Hans J. Koch 829e001543 Fix some #includes in CAN drivers (rebased for net-next-2.6)
In the current implementation, CAN drivers need to #include <linux/can.h>
_before_ they #include <linux/can/dev.h>, which is both ugly and
unnecessary.

Fix this by including <linux/can.h> in <linux/can/dev.h> and remove the
#include <linux/can.h> lines from drivers.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 03:32:42 -07:00
Christian Pellegrin ad72c347e5 can: Proper ctrlmode handling for CAN devices
This patch adds error checking of ctrlmode values for CAN devices. As
an example all availabe bits are implemented in the mcp251x driver.

Signed-off-by: Christian Pellegrin <chripell@fsfe.org>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-15 01:39:17 -08:00
Oliver Hartkopp 3ccd4c6167 can: Unify droping of invalid tx skbs and netdev stats
To prevent the CAN drivers to operate on invalid socketbuffers the skbs are
now checked and silently dropped at the xmit-function consistently.

Also the netdev stats are consistently using the CAN data length code (dlc)
for [rx|tx]_bytes now.

Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-12 02:00:46 -08:00
Uwe Kleine-König 4773a47d8a can/at91: don't check platform_get_irq's return value against zero
platform_get_irq returns -ENXIO on failure, so !irq was probably
always true.  Better use (int)irq <= 0.  Note that a return value of
zero is still handled as error even though this could mean irq0.

This is a followup to 305b3228f9 that
changed the return value of platform_get_irq from 0 to -ENXIO on error.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-18 20:31:56 -08:00
Oliver Hartkopp c7cd606f60 can: Fix data length code handling in rx path
A valid CAN dataframe can have a data length code (DLC) of 0 .. 8 data bytes.

When reading the CAN controllers register the 4-bit value may contain values
from 0 .. 15 which may exceed the reserved space in the socket buffer!

The ISO 11898-1 Chapter 8.4.2.3 (DLC field) says that register values > 8
should be reduced to 8 without any error reporting or frame drop.

This patch introduces a new helper macro to cast a given 4-bit data length
code (dlc) to __u8 and ensure the DLC value to be max. 8 bytes.

The different handlings in the rx path of the CAN netdevice drivers are fixed.

Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-13 19:47:42 -08:00
Wolfgang Grandegger 7b6856a029 can: provide library functions for skb allocation
This patch makes the private functions alloc_can_skb() and
alloc_can_err_skb() of the at91_can driver public and adapts all
drivers to use these. While making the patch I realized, that
the skb's are *not* setup consistently. It's now done as shown
below:

  skb->protocol = htons(ETH_P_CAN);
  skb->pkt_type = PACKET_BROADCAST;
  skb->ip_summed = CHECKSUM_UNNECESSARY;
  *cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
  memset(*cf, 0, sizeof(struct can_frame));

The frame is zeroed out to avoid uninitialized data to be passed to
user space. Some drivers or library code did not set "pkt_type" or
"ip_summed". Also,  "__constant_htons()" should not be used for
runtime invocations, as pointed out by David Miller.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-20 00:08:01 -07:00
Wolfgang Grandegger a6e4bc5304 can: make the number of echo skb's configurable
This patch allows the CAN controller driver to define the number of echo
skb's used for the local loopback (echo), as suggested by Kurt Van
Dijck, with the function:

  struct net_device *alloc_candev(int sizeof_priv,
                                  unsigned int echo_skb_max);

The CAN drivers have been adapted accordingly. For the ems_usb driver,
as suggested by Sebastian Haas, the number of echo skb's has been
increased to 10, which improves the transmission performance a lot.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13 03:44:04 -07:00
David S. Miller 99c4a6344f at91_can: Forgotten git 'add' of at91_can.c
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25 13:43:54 -07:00