Commit Graph

31442 Commits

Author SHA1 Message Date
Linus Torvalds 16e5a2ed59 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking updates from David Miller:

 1) Fix flexcan build on big endian, from Arnd Bergmann

 2) Correctly attach cpsw to GPIO bitbang MDIO drive, from Stefan Roese

 3) udp_add_offload has to use GFP_ATOMIC since it can be invoked from
    non-sleepable contexts.  From Or Gerlitz

 4) vxlan_gro_receive() does not iterate over all possible flows
    properly, fix also from Or Gerlitz

 5) CAN core doesn't use a proper SKB destructor when it hooks up
    sockets to SKBs.  Fix from Oliver Hartkopp

 6) ip_tunnel_xmit() can use an uninitialized route pointer, fix from
    Eric Dumazet

 7) Fix address family assignment in IPVS, from Michal Kubecek

 8) Fix ath9k build on ARM, from Sujith Manoharan

 9) Make sure fail_over_mac only applies for the correct bonding modes,
    from Ding Tianhong

10) The udp offload code doesn't use RCU correctly, from Shlomo Pongratz

11) Handle gigabit features properly in generic PHY code, from Florian
    Fainelli

12) Don't blindly invoke link operations in
    rtnl_link_get_slave_info_data_size, they are optional.  Fix from
    Fernando Luis Vazquez Cao

13) Add USB IDs for Netgear Aircard 340U, from Bjørn Mork

14) Handle netlink packet padding properly in openvswitch, from Thomas
    Graf

15) Fix oops when deleting chains in nf_tables, from Patrick McHardy

16) Fix RX stalls in xen-netback driver, from Zoltan Kiss

17) Fix deadlock in mac80211 stack, from Emmanuel Grumbach

18) inet_nlmsg_size() forgets to consider ifa_cacheinfo, fix from Geert
    Uytterhoeven

19) tg3_change_mtu() can deadlock, fix from Nithin Sujir

20) Fix regression in setting SCTP local source addresses on accepted
    sockets, caused by some generic ipv6 socket changes.  Fix from
    Matija Glavinic Pecotic

21) IPPROTO_* must be pure defines, otherwise module aliases don't get
    constructed properly.  Fix from Jan Moskyto

22) IPV6 netconsole setup doesn't work properly unless an explicit
    source address is specified, fix from Sabrina Dubroca

23) Use __GFP_NORETRY for high order skb page allocations in
    sock_alloc_send_pskb and skb_page_frag_refill.  From Eric Dumazet

24) Fix a regression added in netconsole over bridging, from Cong Wang

25) TCP uses an artificial offset of 1ms for SRTT, but this doesn't jive
    well with TCP pacing which needs the SRTT to be accurate.  Fix from
    Eric Dumazet

26) Several cases of missing header file includes from Rashika Kheria

27) Add ZTE MF667 device ID to qmi_wwan driver, from Raymond Wanyoike

28) TCP Small Queues doesn't handle nonagle properly in some corner
    cases, fix from Eric Dumazet

29) Remove extraneous read_unlock in bond_enslave, whoops.  From Ding
    Tianhong

30) Fix 9p trans_virtio handling of vmalloc buffers, from Richard Yao

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (136 commits)
  6lowpan: fix lockdep splats
  alx: add missing stats_lock spinlock init
  9p/trans_virtio.c: Fix broken zero-copy on vmalloc() buffers
  bonding: remove unwanted bond lock for enslave processing
  USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support
  tcp: tsq: fix nonagle handling
  bridge: Prevent possible race condition in br_fdb_change_mac_address
  bridge: Properly check if local fdb entry can be deleted when deleting vlan
  bridge: Properly check if local fdb entry can be deleted in br_fdb_delete_by_port
  bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address
  bridge: Fix the way to check if a local fdb entry can be deleted
  bridge: Change local fdb entries whenever mac address of bridge device changes
  bridge: Fix the way to find old local fdb entries in br_fdb_change_mac_address
  bridge: Fix the way to insert new local fdb entries in br_fdb_changeaddr
  bridge: Fix the way to find old local fdb entries in br_fdb_changeaddr
  tcp: correct code comment stating 3 min timeout for FIN_WAIT2, we only do 1 min
  net: vxge: Remove unused device pointer
  net: qmi_wwan: add ZTE MF667
  3c59x: Remove unused pointer in vortex_eisa_cleanup()
  net: fix 'ip rule' iif/oif device rename
  ...
2014-02-11 12:05:55 -08:00
Eric Dumazet 20e7c4e80d 6lowpan: fix lockdep splats
When a device ndo_start_xmit() calls again dev_queue_xmit(),
lockdep can complain because dev_queue_xmit() is re-entered and the
spinlocks protecting tx queues share a common lockdep class.

Same issue was fixed for bonding/l2tp/ppp in commits

0daa230302 ("[PATCH] bonding: lockdep annotation")
49ee49202b ("bonding: set qdisc_tx_busylock to avoid LOCKDEP splat")
23d3b8bfb8 ("net: qdisc busylock needs lockdep annotations ")
303c07db48 ("ppp: set qdisc_tx_busylock to avoid LOCKDEP splat ")

Reported-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10 17:51:29 -08:00
Richard Yao b6f52ae2f0 9p/trans_virtio.c: Fix broken zero-copy on vmalloc() buffers
The 9p-virtio transport does zero copy on things larger than 1024 bytes
in size. It accomplishes this by returning the physical addresses of
pages to the virtio-pci device. At present, the translation is usually a
bit shift.

That approach produces an invalid page address when we read/write to
vmalloc buffers, such as those used for Linux kernel modules. Any
attempt to load a Linux kernel module from 9p-virtio produces the
following stack.

[<ffffffff814878ce>] p9_virtio_zc_request+0x45e/0x510
[<ffffffff814814ed>] p9_client_zc_rpc.constprop.16+0xfd/0x4f0
[<ffffffff814839dd>] p9_client_read+0x15d/0x240
[<ffffffff811c8440>] v9fs_fid_readn+0x50/0xa0
[<ffffffff811c84a0>] v9fs_file_readn+0x10/0x20
[<ffffffff811c84e7>] v9fs_file_read+0x37/0x70
[<ffffffff8114e3fb>] vfs_read+0x9b/0x160
[<ffffffff81153571>] kernel_read+0x41/0x60
[<ffffffff810c83ab>] copy_module_from_fd.isra.34+0xfb/0x180

Subsequently, QEMU will die printing:

qemu-system-x86_64: virtio: trying to map MMIO memory

This patch enables 9p-virtio to correctly handle this case. This not
only enables us to load Linux kernel modules off virtfs, but also
enables ZFS file-based vdevs on virtfs to be used without killing QEMU.

Special thanks to both Avi Kivity and Alexander Graf for their
interpretation of QEMU backtraces. Without their guidence, tracking down
this bug would have taken much longer. Also, special thanks to Linus
Torvalds for his insightful explanation of why this should use
is_vmalloc_addr() instead of is_vmalloc_or_module_addr():

https://lkml.org/lkml/2014/2/8/272

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10 17:48:54 -08:00
John Ogness bf06200e73 tcp: tsq: fix nonagle handling
Commit 46d3ceabd8 ("tcp: TCP Small Queues") introduced a possible
regression for applications using TCP_NODELAY.

If TCP session is throttled because of tsq, we should consult
tp->nonagle when TX completion is done and allow us to send additional
segment, especially if this segment is not a full MSS.
Otherwise this segment is sent after an RTO.

[edumazet] : Cooked the changelog, added another fix about testing
sk_wmem_alloc twice because TX completion can happen right before
setting TSQ_THROTTLED bit.

This problem is particularly visible with recent auto corking,
but might also be triggered with low tcp_limit_output_bytes
values or NIC drivers delaying TX completion by hundred of usec,
and very low rtt.

Thomas Glanzmann for example reported an iscsi regression, caused
by tcp auto corking making this bug quite visible.

Fixes: 46d3ceabd8 ("tcp: TCP Small Queues")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10 15:23:39 -08:00
Toshiaki Makita ac4c886883 bridge: Prevent possible race condition in br_fdb_change_mac_address
br_fdb_change_mac_address() calls fdb_insert()/fdb_delete() without
br->hash_lock.

These hash list updates are racy with br_fdb_update()/br_fdb_cleanup().

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10 14:34:34 -08:00
Toshiaki Makita 424bb9c97c bridge: Properly check if local fdb entry can be deleted when deleting vlan
Vlan codes unconditionally delete local fdb entries.
We should consider the possibility that other ports have the same
address and vlan.

Example of problematic case:
  ip link set eth0 address 12:34:56:78:90:ab
  ip link set eth1 address aa:bb:cc:dd:ee:ff
  brctl addif br0 eth0
  brctl addif br0 eth1 # br0 will have mac address 12:34:56:78:90:ab
  bridge vlan add dev eth0 vid 10
  bridge vlan add dev eth1 vid 10
  bridge vlan add dev br0 vid 10 self
We will have fdb entry such that f->dst == eth0, f->vlan_id == 10 and
f->addr == 12:34:56:78:90:ab at this time.
Next, delete eth0 vlan 10.
  bridge vlan del dev eth0 vid 10
In this case, we still need the entry for br0, but it will be deleted.

Note that br0 needs the entry even though its mac address is not set
manually. To delete the entry with proper condition checking,
fdb_delete_local() is suitable to use.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10 14:34:34 -08:00
Toshiaki Makita a778e6d1a5 bridge: Properly check if local fdb entry can be deleted in br_fdb_delete_by_port
br_fdb_delete_by_port() doesn't care about vlan and mac address of the
bridge device.

As the check is almost the same as mac address changing, slightly modify
fdb_delete_local() and use it.

Note that we can always set added_by_user to 0 in fdb_delete_local() because
- br_fdb_delete_by_port() calls fdb_delete_local() for local entries
  regardless of its added_by_user. In this case, we have to check if another
  port has the same address and vlan, and if found, we have to create the
  entry (by changing dst). This is kernel-added entry, not user-added.
- br_fdb_changeaddr() doesn't call fdb_delete_local() for user-added entry.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10 14:34:34 -08:00
Toshiaki Makita 960b589f86 bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address
br_fdb_change_mac_address() doesn't check if the local entry has the
same address as any of bridge ports.
Although I'm not sure when it is beneficial, current implementation allow
the bridge device to receive any mac address of its ports.
To preserve this behavior, we have to check if the mac address of the
entry being deleted is identical to that of any port.

As this check is almost the same as that in br_fdb_changeaddr(), create
a common function fdb_delete_local() and call it from
br_fdb_changeadddr() and br_fdb_change_mac_address().

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10 14:34:33 -08:00
Toshiaki Makita 2b292fb4a5 bridge: Fix the way to check if a local fdb entry can be deleted
We should take into account the followings when deleting a local fdb
entry.

- nbp_vlan_find() can be used only when vid != 0 to check if an entry is
  deletable, because a fdb entry with vid 0 can exist at any time while
  nbp_vlan_find() always return false with vid 0.

  Example of problematic case:
    ip link set eth0 address 12:34:56:78:90:ab
    ip link set eth1 address 12:34:56:78:90:ab
    brctl addif br0 eth0
    brctl addif br0 eth1
    ip link set eth0 address aa:bb:cc:dd:ee:ff
  Then, the fdb entry 12:34:56:78:90:ab will be deleted even though the
  bridge port eth1 still has that address.

- The port to which the bridge device is attached might needs a local entry
  if its mac address is set manually.

  Example of problematic case:
    ip link set eth0 address 12:34:56:78:90:ab
    brctl addif br0 eth0
    ip link set br0 address 12:34:56:78:90:ab
    ip link set eth0 address aa:bb:cc:dd:ee:ff
  Then, the fdb still must have the entry 12:34:56:78:90:ab, but it will be
  deleted.

We can use br->dev->addr_assign_type to check if the address is manually
set or not, but I propose another approach.

Since we delete and insert local entries whenever changing mac address
of the bridge device, we can change dst of the entry to NULL regardless of
addr_assign_type when deleting an entry associated with a certain port,
and if it is found to be unnecessary later, then delete it.
That is, if changing mac address of a port, the entry might be changed
to its dst being NULL first, but is eventually deleted when recalculating
and changing bridge id.

This approach is especially useful when we want to share the code with
deleting vlan in which the bridge device might want such an entry regardless
of addr_assign_type, and makes things easy because we don't have to consider
if mac address of the bridge device will be changed or not at the time we
delete a local entry of a port, which means fdb code will not be bothered
even if the bridge id calculating logic is changed in the future.

Also, this change reduces inconsistent state, where frames whose dst is the
mac address of the bridge, can't reach the bridge because of premature fdb
entry deletion. This change reduces the possibility that the bridge device
replies unreachable mac address to arp requests, which could occur during
the short window between calling del_nbp() and br_stp_recalculate_bridge_id()
in br_del_if(). This will effective after br_fdb_delete_by_port() starts to
use the same code by following patch.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10 14:34:33 -08:00
Toshiaki Makita a4b816d8ba bridge: Change local fdb entries whenever mac address of bridge device changes
Vlan code may need fdb change when changing mac address of bridge device
even if it is caused by the mac address changing of a bridge port.

Example configuration:
  ip link set eth0 address 12:34:56:78:90:ab
  ip link set eth1 address aa:bb:cc:dd:ee:ff
  brctl addif br0 eth0
  brctl addif br0 eth1 # br0 will have mac address 12:34:56:78:90:ab
  bridge vlan add dev br0 vid 10 self
  bridge vlan add dev eth0 vid 10
We will have fdb entry such that f->dst == NULL, f->vlan_id == 10 and
f->addr == 12:34:56:78:90:ab at this time.
Next, change the mac address of eth0 to greater value.
  ip link set eth0 address ee:ff:12:34:56:78
Then, mac address of br0 will be recalculated and set to aa:bb:cc:dd:ee:ff.
However, an entry aa:bb:cc:dd:ee:ff will not be created and we will be not
able to communicate using br0 on vlan 10.

Address this issue by deleting and adding local entries whenever
changing the mac address of the bridge device.

If there already exists an entry that has the same address, for example,
in case that br_fdb_changeaddr() has already inserted it,
br_fdb_change_mac_address() will simply fail to insert it and no
duplicated entry will be made, as it was.

This approach also needs br_add_if() to call br_fdb_insert() before
br_stp_recalculate_bridge_id() so that we don't create an entry whose
dst == NULL in this function to preserve previous behavior.

Note that this is a slight change in behavior where the bridge device can
receive the traffic to the new address before calling
br_stp_recalculate_bridge_id() in br_add_if().
However, it is not a problem because we have already the address on the
new port and such a way to insert new one before recalculating bridge id
is taken in br_device_event() as well.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10 14:34:33 -08:00
Toshiaki Makita a3ebb7efe7 bridge: Fix the way to find old local fdb entries in br_fdb_change_mac_address
We have been always failed to delete the old entry at
br_fdb_change_mac_address() because br_set_mac_address() updates
dev->dev_addr before calling br_fdb_change_mac_address() and
br_fdb_change_mac_address() uses dev->dev_addr to find the old entry.

That update of dev_addr is completely unnecessary because the same work
is done in br_stp_change_bridge_id() which is called right away after
calling br_fdb_change_mac_address().

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10 14:34:33 -08:00
Toshiaki Makita 2836882fe0 bridge: Fix the way to insert new local fdb entries in br_fdb_changeaddr
Since commit bc9a25d21e ("bridge: Add vlan support for local fdb entries"),
br_fdb_changeaddr() has inserted a new local fdb entry only if it can
find old one. But if we have two ports where they have the same address
or user has deleted a local entry, there will be no entry for one of the
ports.

Example of problematic case:
  ip link set eth0 address aa:bb:cc:dd:ee:ff
  ip link set eth1 address aa:bb:cc:dd:ee:ff
  brctl addif br0 eth0
  brctl addif br0 eth1 # eth1 will not have a local entry due to dup.
  ip link set eth1 address 12:34:56:78:90:ab
Then, the new entry for the address 12:34:56:78:90:ab will not be
created, and the bridge device will not be able to communicate.

Insert new entries regardless of whether we can find old entries or not.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10 14:34:33 -08:00
Toshiaki Makita a5642ab474 bridge: Fix the way to find old local fdb entries in br_fdb_changeaddr
br_fdb_changeaddr() assumes that there is at most one local entry per port
per vlan. It used to be true, but since commit 36fd2b63e3 ("bridge: allow
creating/deleting fdb entries via netlink"), it has not been so.
Therefore, the function might fail to search a correct previous address
to be deleted and delete an arbitrary local entry if user has added local
entries manually.

Example of problematic case:
  ip link set eth0 address ee:ff:12:34:56:78
  brctl addif br0 eth0
  bridge fdb add 12:34:56:78:90:ab dev eth0 master
  ip link set eth0 address aa:bb:cc:dd:ee:ff
Then, the address 12:34:56:78:90:ab might be deleted instead of
ee:ff:12:34:56:78, the original mac address of eth0.

Address this issue by introducing a new flag, added_by_user, to struct
net_bridge_fdb_entry.

Note that br_fdb_delete_by_port() has to set added_by_user to 0 in cases
like:
  ip link set eth0 address 12:34:56:78:90:ab
  ip link set eth1 address aa:bb:cc:dd:ee:ff
  brctl addif br0 eth0
  bridge fdb add aa:bb:cc:dd:ee:ff dev eth0 master
  brctl addif br0 eth1
  brctl delif br0 eth0
In this case, kernel should delete the user-added entry aa:bb:cc:dd:ee:ff,
but it also should have been added by "brctl addif br0 eth1" originally,
so we don't delete it and treat it a new kernel-created entry.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10 14:34:33 -08:00
Jesper Juhl b10bd54c05 tcp: correct code comment stating 3 min timeout for FIN_WAIT2, we only do 1 min
As far as I can tell we have used a default of 60 seconds for
FIN_WAIT2 timeout for ages (since 2.x times??).

In any case, the timeout these days is 60 seconds, so the 3 min
comment is wrong (and cost me a few minutes of my life when I was
debugging a FIN_WAIT2 related problem in a userspace application and
checked the kernel source for details).

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 19:14:23 -08:00
Maciej Żenczykowski 946c032e5a net: fix 'ip rule' iif/oif device rename
ip rules with iif/oif references do not update:
(detach/attach) across interface renames.

Signed-off-by: Maciej Żenczykowski <maze@google.com>
CC: Willem de Bruijn <willemb@google.com>
CC: Eric Dumazet <edumazet@google.com>
CC: Chris Davis <chrismd@google.com>
CC: Carlo Contavalli <ccontavalli@google.com>

Google-Bug-Id: 12936021
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 19:02:52 -08:00
Christian Engelmayer 310f6fd0ca 6lowpan: Remove unused pointer in lowpan_header_create()
Commit 8df8c56a (6lowpan: Moving generic compression code into 6lowpan_iphc.c)
left pointer 'hdr' unused - remove it.

Detected by Coverity: CID 1164868.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 18:38:10 -08:00
FX Le Bail d94c1f92bb ipv6: icmp6_send: fix Oops when pinging a not set up IPv6 peer on a sit tunnel
The patch 446fab5933 ("ipv6: enable anycast addresses
as source addresses in ICMPv6 error messages") causes an Oops when pinging a not
set up IPv6 peer on a sit tunnel.

The problem is that ipv6_anycast_destination() uses unconditionally skb_dst(skb),
which is NULL in this case.

The solution is to use instead the ipv6_chk_acast_addr_src() function.

Here are the steps to reproduce it:
modprobe sit
ip link add sit1 type sit remote 10.16.0.121 local 10.16.0.249
ip l s sit1 up
ip -6 a a dev sit1 2001🔢:123 remote 2001🔢:121
ping6 2001🔢:121

Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 18:12:40 -08:00
Rashika Kheria e1d83ee673 net: Mark functions as static in net/sunrpc/svc_xprt.c
Mark functions as static in net/sunrpc/svc_xprt.c because they are not
used outside this file.

This eliminates the following warning in net/sunrpc/svc_xprt.c:
net/sunrpc/svc_xprt.c:574:5: warning: no previous prototype for ‘svc_alloc_arg’ [-Wmissing-prototypes]
net/sunrpc/svc_xprt.c:615:18: warning: no previous prototype for ‘svc_get_next_xprt’ [-Wmissing-prototypes]
net/sunrpc/svc_xprt.c:694:6: warning: no previous prototype for ‘svc_add_new_temp_xprt’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 17:32:50 -08:00
Rashika Kheria bd76ed36ba net: Include appropriate header file in netfilter/nft_lookup.c
Include appropriate header file net/netfilter/nf_tables_core.h in
net/netfilter/nft_lookup.c because it has prototype declaration of
functions defined in net/netfilter/nft_lookup.c.

This eliminates the following warning in net/netfilter/nft_lookup.c:
net/netfilter/nft_lookup.c:133:12: warning: no previous prototype for ‘nft_lookup_module_init’ [-Wmissing-prototypes]
net/netfilter/nft_lookup.c:138:6: warning: no previous prototype for ‘nft_lookup_module_exit’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 17:32:50 -08:00
Rashika Kheria 535d3ae9c8 net: Move prototype declaration to header file include/net/net_namespace.h from net/ipx/af_ipx.c
Move prototype declaration of function to header file
include/net/net_namespace.h from net/ipx/af_ipx.c because they are used
by more than one file.

This eliminates the following warning in net/ipx/sysctl_net_ipx.c:
net/ipx/sysctl_net_ipx.c:33:6: warning: no previous prototype for ‘ipx_register_sysctl’ [-Wmissing-prototypes]
net/ipx/sysctl_net_ipx.c:38:6: warning: no previous prototype for ‘ipx_unregister_sysctl’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 17:32:50 -08:00
Rashika Kheria 7780d8ae4a net: Move prototype declaration to header file include/net/datalink.h from net/ipx/af_ipx.c
Move prototype declarations of function to header file
include/net/datalink.h from net/ipx/af_ipx.c because they are used by
more than one file.

This eliminates the following warning in net/ipx/pe2.c:
net/ipx/pe2.c:20:24: warning: no previous prototype for ‘make_EII_client’ [-Wmissing-prototypes]
net/ipx/pe2.c:32:6: warning: no previous prototype for ‘destroy_EII_client’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 17:32:50 -08:00
Rashika Kheria 578efbc19f net: Move prototype declaration to header file include/net/ipx.h from net/ipx/af_ipx.c
Move prototype declaration of functions to header file include/net/ipx.h
from net/ipx/af_ipx.c because they are used by more than one file.

This eliminates the following warning in
net/ipx/ipx_route.c:33:19: warning: no previous prototype for ‘ipxrtr_lookup’ [-Wmissing-prototypes]
net/ipx/ipx_route.c:52:5: warning: no previous prototype for ‘ipxrtr_add_route’ [-Wmissing-prototypes]
net/ipx/ipx_route.c:94:6: warning: no previous prototype for ‘ipxrtr_del_routes’ [-Wmissing-prototypes]
net/ipx/ipx_route.c:149:5: warning: no previous prototype for ‘ipxrtr_route_skb’ [-Wmissing-prototypes]
net/ipx/ipx_route.c:171:5: warning: no previous prototype for ‘ipxrtr_route_packet’ [-Wmissing-prototypes]
net/ipx/ipx_route.c:261:5: warning: no previous prototype for ‘ipxrtr_ioctl’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 17:32:50 -08:00
Rashika Kheria 493cc5e5ba net: Move prototype declaration to include/net/ipx.h from net/ipx/ipx_route.c
Move prototype definition of function to header file include/net/ipx.h
from net/ipx/ipx_route.c because they are used by more than one file.

This eliminates the following warning from net/ipx/af_ipx.c:
net/ipx/af_ipx.c:193:23: warning: no previous prototype for ‘ipxitf_find_using_net’ [-Wmissing-prototypes]
net/ipx/af_ipx.c:577:5: warning: no previous prototype for ‘ipxitf_send’ [-Wmissing-prototypes]
net/ipx/af_ipx.c:1219:8: warning: no previous prototype for ‘ipx_cksum’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 17:32:49 -08:00
Rashika Kheria ab3301bd96 net: Move prototype declaration to header file include/net/dn.h from net/decnet/af_decnet.c
Move prototype declaration of functions to header file include/net/dn.h
from net/decnet/af_decnet.c because they are used by more than one file.

This eliminates the following warning in net/decnet/af_decnet.c:
net/decnet/sysctl_net_decnet.c:354:6: warning: no previous prototype for ‘dn_register_sysctl’ [-Wmissing-prototypes]
net/decnet/sysctl_net_decnet.c:359:6: warning: no previous prototype for ‘dn_unregister_sysctl’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 17:32:49 -08:00
Rashika Kheria f56b8bf6e4 net: Move prototype declaration to appropriate header file from decnet/af_decnet.c
Move prototype declaration of functions to header file include/net/dn_route.h
from net/decnet/af_decnet.c because it is used by more than one file.

This eliminates the following warning in net/decnet/dn_route.c:
net/decnet/dn_route.c:629:5: warning: no previous prototype for ‘dn_route_rcv’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 17:32:49 -08:00
Rashika Kheria 0a59f3a9fd net: Mark functions as static in core/dev.c
Mark functions as static in core/dev.c because they are not used outside
this file.

This eliminates the following warning in core/dev.c:
net/core/dev.c:2806:5: warning: no previous prototype for ‘__dev_queue_xmit’ [-Wmissing-prototypes]
net/core/dev.c:4640:5: warning: no previous prototype for ‘netdev_adjacent_sysfs_add’ [-Wmissing-prototypes]
net/core/dev.c:4650:6: warning: no previous prototype for ‘netdev_adjacent_sysfs_del’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 17:32:49 -08:00
Rashika Kheria 02fe72c9ed net: Include appropriate header file in caif/cfsrvl.c
Include appropriate header file net/caif/caif_dev.h in caif/cfsrvl.c
because it has prototype declaration of functions defined in
caif/cfsrvl.c.

This eliminates the following warning in caif/cfsrvl.c:
net/caif/cfsrvl.c:198:6: warning: no previous prototype for ‘caif_free_client’ [-Wmissing-prototypes]
net/caif/cfsrvl.c:208:6: warning: no previous prototype for ‘caif_client_register_refcnt’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 17:32:49 -08:00
Rashika Kheria 8203274e15 net: Include appropriate header file in caif/caif_dev.c
Include appropriate header file net/caif/caif_dev.h in caif/caif_dev.c
because it has prototype declarations of function defined in
caif/caif_dev.c.

This eliminates the following file in caif/caif_dev.c:
net/caif/caif_dev.c:303:6: warning: no previous prototype for ‘caif_enroll_dev’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 17:32:49 -08:00
Rashika Kheria fd944bded5 net: Mark function as static in 9p/client.c
Mark function as static in net/9p/client.c because it is not used
outside this file.

This eliminates the following warning in net/9p/client.c:
net/9p/client.c:207:18: warning: no previous prototype for ‘p9_fcall_alloc’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 17:32:49 -08:00
David S. Miller 872c7e6fd2 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:

====================
Please pull this batch of fixes intended for the 3.14 stream!

For the mac80211 bits, Johannes says:

"This is just a collection of small fixes, the commit logs explain the
details. The only thing that isn't strictly a fix is the 5/10 MHz
enabling, I had forgotten this and there's little point in waiting
longer. The patch simply removes the force-disable code that I put in
when there was a problem with the userspace API (that has long been
fixed.)"

For the iwlwifi bits, Emmanuel says:

"I have an important fix that disables A band in case the driver thought
it was enabled, and the firmware disagreed. We ended up making the
firmware unhappy. I also fix the station table in AP mode and fix the
scan while we have BT working.
Johannes removes a static variable that could potentially lead to to
issues on multi-device setups and disables scheduled scan to avoid
issues with old versions of wpa_supplicant.
A small fix from David on scan and a few new device IDs for 7265."

On top of that...

Oleksij Rempel adds a USB ID to the ar5523 driver and changes the
default powersave setting for ath9k_htc to "off", due to observed
stability issues (based on an equivalent ath9k patch).

Stanislaw Gruszka similarly disables powersave for a couple of rt2x00
drivers.  He also fixes a couple of scheduling while atomic issues
in ath9k_htc.

Sujith Manoharan rounds-out the powersave disables with one for ath9k.
He also fixes a build prolem with ath9k on ARM and fixes an ath9k Tx
power calculation.

Finally, Andrea Merello fixes a couple of lingering DMA mapping
problems in the rtl8180 driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 14:21:25 -08:00
David S. Miller f41f031960 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter/nftables/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes, mostly nftables
fixes, most relevantly they are:

* Fix a crash in the h323 conntrack NAT helper due to expectation list
  corruption, from Alexey Dobriyan.

* A couple of RCU race fixes for conntrack, one manifests by hitting BUG_ON
  in nf_nat_setup_info() and the destroy path, patches from Andrey Vagin and
  me.

* Dump direction attribute in nft_ct only if it is set, from Arturo
  Borrero.

* Fix IPVS bug in its own connection tracking system that may lead to
  copying only 4 bytes of the IPv6 address when initializing the
  ip_vs_conn object, from Michal Kubecek.

* Fix -EBUSY errors in nftables when deleting the rules, chain and tables
  in a row due mixture of asynchronous and synchronous object releasing,
  from me.

* Three fixes for the nf_tables set infrastructure when using intervals and
  mappings, from me.

* Four patches to fixing the nf_tables log, reject and ct expressions from
  the new inet table, from Patrick McHardy.

* Fix memory overrun in the map that is used to dynamically allocate names
  from anonymous sets, also from Patrick.

* Fix a potential oops if you dump a set with NFPROTO_UNSPEC and a table
  name, from Patrick McHardy.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 14:20:00 -08:00
Ilya Dryomov 0ec1d15ec6 libceph: do not dereference a NULL bio pointer
Commit f38a5181d9 ("ceph: Convert to immutable biovecs") introduced
a NULL pointer dereference, which broke rbd in -rc1.  Fix it.

Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-02-07 11:37:07 -08:00
Ilya Dryomov ff513ace9b libceph: take map_sem for read in handle_reply()
Handling redirect replies requires both map_sem and request_mutex.
Taking map_sem unconditionally near the top of handle_reply() avoids
possible race conditions that arise from releasing request_mutex to be
able to acquire map_sem in redirect reply case.  (Lock ordering is:
map_sem, request_mutex, crush_mutex.)

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-02-07 10:45:53 -08:00
Ilya Dryomov 0bbfdfe8d2 libceph: factor out logic from ceph_osdc_start_request()
Factor out logic from ceph_osdc_start_request() into a new helper,
__ceph_osdc_start_request().  ceph_osdc_start_request() now amounts to
taking locks and calling __ceph_osdc_start_request().

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-02-07 10:45:42 -08:00
John W. Linville 0f96b860bc Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 2014-02-07 13:44:14 -05:00
Patrick McHardy 6d8c00d58e netfilter: nf_tables: unininline nft_trace_packet()
It makes no sense to inline a rarely used function meant for debugging
only that is called a total of five times in the main evaluation loop.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-02-07 17:50:27 +01:00
Pablo Neira Ayuso 62f9c8b40d netfilter: nf_tables: fix loop checking with end interval elements
Fix access to uninitialized data for end interval elements. The
element data part is uninitialized in interval end elements.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-02-07 17:21:45 +01:00
Pablo Neira Ayuso 2fb91ddbf8 netfilter: nft_rbtree: fix data handling of end interval elements
This patch fixes several things which related to the handling of
end interval elements:

* Chain use underflow with intervals and map: If you add a rule
  using intervals+map that introduces a loop, the error path of the
  rbtree set decrements the chain refcount for each side of the
  interval, leading to a chain use counter underflow.

* Don't copy the data part of the end interval element since, this
  area is uninitialized and this confuses the loop detection code.

* Don't allocate room for the data part of end interval elements
  since this is unused.

So, after this patch the idea is that end interval elements don't
have a data part.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Patrick McHardy <kaber@trash.net>
2014-02-07 14:22:06 +01:00
Pablo Neira Ayuso bd7fc645da netfilter: nf_tables: do not allow NFT_SET_ELEM_INTERVAL_END flag and data
This combination is not allowed since end interval elements cannot
contain data.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Patrick McHardy <kaber@trash.net>
2014-02-07 14:21:49 +01:00
Eric Dumazet 4a5ab4e224 tcp: remove 1ms offset in srtt computation
TCP pacing depends on an accurate srtt estimation.

Current srtt estimation is using jiffie resolution,
and has an artificial offset of at least 1 ms, which can produce
slowdowns when FQ/pacing is used, especially in DC world,
where typical rtt is below 1 ms.

We are planning a switch to usec resolution for linux-3.15,
but in the meantime, this patch removes the 1 ms offset.

All we need is to have tp->srtt minimal value of 1 to differentiate
the case of srtt being initialized or not, not 8.

The problematic behavior was observed on a 40Gbit testbed,
where 32 concurrent netperf were reaching 12Gbps of aggregate
speed, instead of line speed.

This patch also has the effect of reporting more accurate srtt and send
rates to iproute2 ss command as in :

$ ss -i dst cca2
Netid  State      Recv-Q Send-Q          Local Address:Port
Peer Address:Port
tcp    ESTAB      0      0                10.244.129.1:56984
10.244.129.2:12865
	 cubic wscale:6,6 rto:200 rtt:0.25/0.25 ato:40 mss:1448 cwnd:10 send
463.4Mbps rcv_rtt:1 rcv_space:29200
tcp    ESTAB      0      390960           10.244.129.1:60247
10.244.129.2:50204
	 cubic wscale:6,6 rto:200 rtt:0.875/0.75 mss:1448 cwnd:73 ssthresh:51
send 966.4Mbps unacked:73 retrans:0/121 rcv_space:29200

Reported-by: Vytautas Valancius <valas@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-06 21:28:06 -08:00
Cong Wang dbe173079a bridge: fix netconsole setup over bridge
Commit 93d8bf9fb8 ("bridge: cleanup netpoll code") introduced
a check in br_netpoll_enable(), but this check is incorrect for
br_netpoll_setup(). This patch moves the code after the check
into __br_netpoll_enable() and calls it in br_netpoll_setup().
For br_add_if(), the check is still needed.

Fixes: 93d8bf9fb8 ("bridge: cleanup netpoll code")
Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Tested-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-06 21:28:06 -08:00
Eric Dumazet ed98df3361 net: use __GFP_NORETRY for high order allocations
sock_alloc_send_pskb() & sk_page_frag_refill()
have a loop trying high order allocations to prepare
skb with low number of fragments as this increases performance.

Problem is that under memory pressure/fragmentation, this can
trigger OOM while the intent was only to try the high order
allocations, then fallback to order-0 allocations.

We had various reports from unexpected regressions.

According to David, setting __GFP_NORETRY should be fine,
as the asynchronous compaction is still enabled, and this
will prevent OOM from kicking as in :

CFSClientEventm invoked oom-killer: gfp_mask=0x42d0, order=3, oom_adj=0,
oom_score_adj=0, oom_score_badness=2 (enabled),memcg_scoring=disabled
CFSClientEventm

Call Trace:
 [<ffffffff8043766c>] dump_header+0xe1/0x23e
 [<ffffffff80437a02>] oom_kill_process+0x6a/0x323
 [<ffffffff80438443>] out_of_memory+0x4b3/0x50d
 [<ffffffff8043a4a6>] __alloc_pages_may_oom+0xa2/0xc7
 [<ffffffff80236f42>] __alloc_pages_nodemask+0x1002/0x17f0
 [<ffffffff8024bd23>] alloc_pages_current+0x103/0x2b0
 [<ffffffff8028567f>] sk_page_frag_refill+0x8f/0x160
 [<ffffffff80295fa0>] tcp_sendmsg+0x560/0xee0
 [<ffffffff802a5037>] inet_sendmsg+0x67/0x100
 [<ffffffff80283c9c>] __sock_sendmsg_nosec+0x6c/0x90
 [<ffffffff80283e85>] sock_sendmsg+0xc5/0xf0
 [<ffffffff802847b6>] __sys_sendmsg+0x136/0x430
 [<ffffffff80284ec8>] sys_sendmsg+0x88/0x110
 [<ffffffff80711472>] system_call_fastpath+0x16/0x1b
Out of Memory: Kill process 2856 (bash) score 9999 or sacrifice child

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-06 21:28:06 -08:00
Sabrina Dubroca 00fe11b3c6 netpoll: fix netconsole IPv6 setup
Currently, to make netconsole start over IPv6, the source address
needs to be specified. Without a source address, netpoll_parse_options
assumes we're setting up over IPv4 and the destination IPv6 address is
rejected.

Check if the IP version has been forced by a source address before
checking for a version mismatch when parsing the destination address.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-06 21:28:06 -08:00
Matija Glavinic Pecotic 661dbf3412 net: sctp: fix initialization of local source address on accepted ipv6 sockets
commit 	efe4208f47f907b86f528788da711e8ab9dea44d:
'ipv6: make lookups simpler and faster' broke initialization of local source
address on accepted ipv6 sockets. Before the mentioned commit receive address
was copied along with the contents of ipv6_pinfo in sctp_v6_create_accept_sk.
Now when it is moved, it has to be copied separately.

This also fixes lksctp's ipv6 regression in a sense that test_getname_v6, TC5 -
'getsockname on a connected server socket' now passes.

Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nsn.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-06 21:18:06 -08:00
Geert Uytterhoeven 63b5f152eb ipv4: Fix runtime WARNING in rtmsg_ifa()
On m68k/ARAnyM:

WARNING: CPU: 0 PID: 407 at net/ipv4/devinet.c:1599 0x316a99()
Modules linked in:
CPU: 0 PID: 407 Comm: ifconfig Not tainted
3.13.0-atari-09263-g0c71d68014d1 #1378
Stack from 10c4fdf0:
        10c4fdf0 002ffabb 000243e8 00000000 008ced6c 00024416 00316a99 0000063f
        00316a99 00000009 00000000 002501b4 00316a99 0000063f c0a86117 00000080
        c0a86117 00ad0c90 00250a5a 00000014 00ad0c90 00000000 00000000 00000001
        00b02dd0 00356594 00000000 00356594 c0a86117 eff6c9e4 008ced6c 00000002
        008ced60 0024f9b4 00250b52 00ad0c90 00000000 00000000 00252390 00ad0c90
        eff6c9e4 0000004f 00000000 00000000 eff6c9e4 8000e25c eff6c9e4 80001020
Call Trace: [<000243e8>] warn_slowpath_common+0x52/0x6c
 [<00024416>] warn_slowpath_null+0x14/0x1a
 [<002501b4>] rtmsg_ifa+0xdc/0xf0
 [<00250a5a>] __inet_insert_ifa+0xd6/0x1c2
 [<0024f9b4>] inet_abc_len+0x0/0x42
 [<00250b52>] inet_insert_ifa+0xc/0x12
 [<00252390>] devinet_ioctl+0x2ae/0x5d6

Adding some debugging code reveals that net_fill_ifaddr() fails in

    put_cacheinfo(skb, ifa->ifa_cstamp, ifa->ifa_tstamp,
                              preferred, valid))

nla_put complains:

    lib/nlattr.c:454: skb_tailroom(skb) = 12, nla_total_size(attrlen) = 20

Apparently commit 5c766d642b ("ipv4:
introduce address lifetime") forgot to take into account the addition of
struct ifa_cacheinfo in inet_nlmsg_size(). Hence add it, like is already
done for ipv6.

Suggested-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-06 20:02:15 -08:00
Pablo Neira Ayuso 0165d9325d netfilter: nf_tables: fix racy rule deletion
We may lost race if we flush the rule-set (which happens asynchronously
via call_rcu) and we try to remove the table (that userspace assumes
to be empty).

Fix this by recovering synchronous rule and chain deletion. This was
introduced time ago before we had no batch support, and synchronous
rule deletion performance was not good. Now that we have the batch
support, we can just postpone the purge of old rule in a second step
in the commit phase. All object deletions are synchronous after this
patch.

As a side effect, we save memory as we don't need rcu_head per rule
anymore.

Cc: Patrick McHardy <kaber@trash.net>
Reported-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-02-06 11:46:06 +01:00
Patrick McHardy b8ecbee67c netfilter: nf_tables: fix log/queue expressions for NFPROTO_INET
The log and queue expressions both store the family during ->init() and
use it to deliver packets. This is wrong when used in NFPROTO_INET since
they should both deliver to the actual AF of the packet, not the dummy
NFPROTO_INET.

Use the family from the hook ops to fix this.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-02-06 11:41:38 +01:00
Johannes Berg fab57a6cc2 mac80211: fix virtual monitor interface iteration
During channel context assignment, the interface should
be found by interface iteration, so we need to assign the
pointer before the channel context.

Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Tested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-06 09:55:22 +01:00
Johannes Berg 338f977f4e mac80211: fix fragmentation code, particularly for encryption
The "new" fragmentation code (since my rewrite almost 5 years ago)
erroneously sets skb->len rather than using skb_trim() to adjust
the length of the first fragment after copying out all the others.
This leaves the skb tail pointer pointing to after where the data
originally ended, and thus causes the encryption MIC to be written
at that point, rather than where it belongs: immediately after the
data.

The impact of this is that if software encryption is done, then
 a) encryption doesn't work for the first fragment, the connection
    becomes unusable as the first fragment will never be properly
    verified at the receiver, the MIC is practically guaranteed to
    be wrong
 b) we leak up to 8 bytes of plaintext (!) of the packet out into
    the air

This is only mitigated by the fact that many devices are capable
of doing encryption in hardware, in which case this can't happen
as the tail pointer is irrelevant in that case. Additionally,
fragmentation is not used very frequently and would normally have
to be configured manually.

Fix this by using skb_trim() properly.

Cc: stable@vger.kernel.org
Fixes: 2de8e0d999 ("mac80211: rewrite fragmentation")
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-06 09:55:21 +01:00
Sujith Manoharan d4c80d9df6 mac80211: Fix IBSS disconnect
Currently, when a station leaves an IBSS network, the
corresponding BSS is not dropped from cfg80211 if there are
other active stations in the network. But, the small
window that is present when trying to determine a station's
status based on IEEE80211_IBSS_MERGE_INTERVAL introduces
a race.

Instead of trying to keep the BSS, always remove it when
leaving an IBSS network. There is not much benefit to retain
the BSS entry since it will be added with a subsequent join
operation.

This fixes an issue where a dangling BSS entry causes ath9k
to wait for a beacon indefinitely.

Cc: <stable@vger.kernel.org>
Reported-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-06 09:55:20 +01:00