On newer boards the TC can be read as single 32 bit value without locking.
Thus the clock can be used as reference for sched_clock which is much more
accurate than the jiffies implementation.
Tested on a Atmel SAMA5D2 board.
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
This is a rewrite of the Gemini timer
driver in arch/arm/mach-gemini/timer.c trying to do everything
the device tree way:
- Make every IO-access relative to a base address and dynamic
so we can do a dynamic ioremap and get going.
- Do not poke around directly in the global syscon registers,
access them using the syscon regmap style design pattern for
the one register we need to check.
- Find register range and interrupt from the device tree.
Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
This adds device tree bindings for the Cortina Systems Gemini
timer block used in these SoCs.
Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The current code uses the CLOCKSOURCE_OF_DECLARE macro to fill the clksrc
table with a t-uple (name, init_function).
Unfortunately it ends up to the clockevent and the clocksource being
both initialized with this macro. It is not a problem by itself but there
is not a clear distinction between a clockevent and a clocksource in the
code initialization path. Somebody can argue there are the same IP block
and the same DT node. But conceptually from the software side, there are
two distincts entities and as is they should be initialized separetely.
Some drivers which do not have a clocksource end up by using the
CLOCKSOURCE_OF_DECLARE macro to declare a clockevent.
Another result is the fuzzy organization in the clocksource directory,
where the clockevents are implemented in the same file than the
clocksources or file labelled timer-something implementing a clocksource.
This patch provides another macro to specifically declare a clockevent in
the same way than the clocksource and gives the opportunity to write two
separate drivers, one for the clocksource and another for the clockevents.
Hopefully, that can help to do some housework in the directory, perhaps
split the drivers in to entities, for example:
- clksrc-rockchip.c
- clkevt-rockchip.c
Also, it gives the possibility to declare clocksources separately in the
DT and then use a clocksource from IP block while while clockevents are
used from another IP block.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
It was observed that on an Intel x86 system without the ARAT (Always
running APIC timer) feature and with fairly large number of CPUs as
well as CPUs coming in and out of intel_idle frequently, the lock
contention on the tick_broadcast_lock can become significant.
To reduce contention, the lock is put into its own cacheline and all
the cpumask_var_t variables are put into the __read_mostly section.
Running the SP benchmark of the NAS Parallel Benchmarks on a 4-socket
16-core 32-thread Nehalam system, the performance number improved
from 3353.94 Mop/s to 3469.31 Mop/s when this patch was applied on
a 4.9.6 kernel. This is a 3.4% improvement.
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1485799063-20857-1-git-send-email-longman@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When CONFIG_POSIX_TIMERS is disabled, it is preferable to remove related
structures from struct task_struct and struct signal_struct as they
won't contain anything useful and shouldn't be relied upon by mistake.
Code still referencing those structures is also disabled here.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
When a panic happens during bootup, "Rebooting in X seconds.." is
shown, but reboot happens immediatelly. It is because panic() uses mdelay()
and mdelay() calls __const_udelay() immediately, which does not
work while booting.
The per_cpu cpu_info.loops_per_jiffy value is not initialized yet, so
__const_udelay() actually multiplies the number of loops by zero. This
results in __const_udelay() to delay the execution only by a nanosecond
or so.
So check whether cpu_info.loops_per_jiffy is zero and use
loops_per_jiffy in that case. mdelay() will not be so precise without
proper calibration, but it works relatively well.
Before:
[ 0.170039] delaying 100ms
[ 0.170828] done
After
[ 0.214042] delaying 100ms
[ 0.313974] done
I do not think the added check matters given we are about to spin the
processor in the next few hundred cycles.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170119114730.2670-1-jslaby@suse.cz
[ Minor edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There seems to be some misunderstanding that udelay() and friends will
always guarantee the specified delay. This is a false understanding.
When udelay() is based on CPU cycles, it can return early for many
reasons which are detailed by Linus' reply to me in a thread in 2011:
http://lists.openwall.net/linux-kernel/2011/01/12/372
However, a udelay test module was created in 2014 which allows udelay()
to only be 0.5% fast, which is outside of the CPU-cycles udelay()
results I measured back in 2011, which were deemed to be in the "we
don't care" region.
test_udelay() should be fixed to reflect the real allowable tolerance
on udelay(), rather than 0.5%.
Cc: David Riley <davidriley@chromium.org>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: John Stultz <john.stultz@linaro.org>
It turns out that while GCC-4.4 manages to generate 32x32->64 mult
instructions for the 32bit mul_u64_u32_shr() code, any GCC after that
fails horribly.
Fix this by providing an explicit mul_u32_u32() function which can be
architcture provided.
Reported-by: Chris Metcalf <cmetcalf@mellanox.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Cc: Christopher S. Hall <christopher.s.hall@intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Liav Rehana <liavr@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Parit Bhargava <prarit@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161209083011.GD15765@worktop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull btrfs fixes from Chris Mason:
"These are all over the place.
The tracepoint part of the pull fixes a crash and adds a little more
information to two tracepoints, while the rest are good old fashioned
fixes"
* 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: make tracepoint format strings more compact
Btrfs: add truncated_len for ordered extent tracepoints
Btrfs: add 'inode' for extent map tracepoint
btrfs: fix crash when tracepoint arguments are freed by wq callbacks
Btrfs: adjust outstanding_extents counter properly when dio write is split
Btrfs: fix lockdep warning about log_mutex
Btrfs: use down_read_nested to make lockdep silent
btrfs: fix locking when we put back a delayed ref that's too new
btrfs: fix error handling when run_delayed_extent_op fails
btrfs: return the actual error value from from btrfs_uuid_tree_iterate
window.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJYeQymAAoJEEp/3jgCEfOLLVsH/28qRsjVPWr5JuL1SF86//kd
rAi7QUfbNgXHqbb10a9za9pNuLhHr3kImIfvQ04wYiYQY+IaAapiRXwQev8BsNAa
yENUc8XwNgydw4FU1ia5PkGOJLDtujtfgjWT2v+gf1HUzLaV6alBzqDwUZBt3xJz
mlYC82oFkXPa0BFmLUXtT/jJu/ZI8caO4KB34/UKi7LjBQk1ca7E2xVUoDtdQmEm
ciPE98akU4JiB99aOgGdwemBzkAMHEGQpImTzqHr/tbIUj0MqVAjH9FVOhRCbjMy
6MSR+U9yUzJkBzefS5enijAoExVc8cD/A0nIaKGVb6qWrIrk51/Opl6iILeVLUo=
=28cq
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.10-rc4' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two small fixups for the filesystem changes that went into this merge
window"
* tag 'ceph-for-4.10-rc4' of git://github.com/ceph/ceph-client:
ceph: fix get_oldest_context()
ceph: fix mds cluster availability check
- Cleanups and bug fixes for the mtty sample driver (Dan Carpenter)
- Export and make use of has_capability() to fix incorrect use of
ns_capable() for testing task capabilities (Jike Song)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=yeS9
-----END PGP SIGNATURE-----
Merge tag 'vfio-v4.10-rc4' of git://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Cleanups and bug fixes for the mtty sample driver (Dan Carpenter)
- Export and make use of has_capability() to fix incorrect use of
ns_capable() for testing task capabilities (Jike Song)
* tag 'vfio-v4.10-rc4' of git://github.com/awilliam/linux-vfio:
vfio/type1: Remove pid_namespace.h include
vfio iommu type1: fix the testing of capability for remote task
capability: export has_capability
vfio-mdev: remove some dead code
vfio-mdev: buffer overflow in ioctl()
vfio-mdev: return -EFAULT if copy_to_user() fails
other buggy modules!)
* two NULL pointer dereferences from syzkaller
* CVE from syzkaller, very serious on 4.10-rc, "just" kernel memory
leak on releases
* CVE from security@kernel.org, somewhat serious on AMD, less so on
Intel
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJYd7l5AAoJEL/70l94x66DLWYH/0GUg+lK9J/gj0kwqi6BwsOP
Rrs5Y7XvyNLsy/piBrrHDHvRa+DfAkrU8nepwgygX/yuGmSDV/zmdIb8XA/dvKht
MN285NFlVjTyznYlU/LH3etx11CHLMNclishiFHQbcnohtvhOe+fvN6RVNdfeRxm
d9iBPOum15ikc1xDl2z8Op+ZXVjMxkgLkzIXFcDBpJf4BvUx0X+ZHZXIKdizVhgU
ZMD2ds/MutMB8X1A52qp6kQvT7xE4rp87M0So4qDMTbAto5G4ZmMaWC5MlK2Oxe/
o+3qnx4vVz4H6uYzg1N4diHiC+buhgtXCLwwkcUOKKUVqJRP9e0Bh7kw8JA52XU=
=C+tM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
- fix for module unload vs deferred jump labels (note: there might be
other buggy modules!)
- two NULL pointer dereferences from syzkaller
- also syzkaller: fix emulation of fxsave/fxrstor/sgdt/sidt, problem
made worse during this merge window, "just" kernel memory leak on
releases
- fix emulation of "mov ss" - somewhat serious on AMD, less so on Intel
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: fix emulation of "MOV SS, null selector"
KVM: x86: fix NULL deref in vcpu_scan_ioapic
KVM: eventfd: fix NULL deref irqbypass consumer
KVM: x86: Introduce segmented_write_std
KVM: x86: flush pending lapic jump label updates on module unload
jump_labels: API for flushing deferred jump label updates
ptes in the contiguous range is changed, not just the last one
- Fix the adr_l assembly macro to work in modules under KASLR
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aUnr
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix huge_ptep_set_access_flags() to return "changed" when any of the
ptes in the contiguous range is changed, not just the last one
- Fix the adr_l assembly macro to work in modules under KASLR
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: assembler: make adr_l work in modules under KASLR
arm64: hugetlb: fix the wrong return value for huge_ptep_set_access_flags
The major fix is the bfa firmware, since the latest 10Gb cards fail
probing with the current firmware. The rest is a set of minor fixes:
one missed Kconfig dependency causing randconfig failures, a missed
error return on an error leg, a change for how multiqueue waits on a
blocked device and a don't reset while in reset fix.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=kjPw
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The major fix is the bfa firmware, since the latest 10Gb cards fail
probing with the current firmware.
The rest is a set of minor fixes: one missed Kconfig dependency
causing randconfig failures, a missed error return on an error leg, a
change for how multiqueue waits on a blocked device and a don't reset
while in reset fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: bfa: Increase requested firmware version to 3.2.5.1
scsi: snic: Return error code on memory allocation failure
scsi: fnic: Avoid sending reset to firmware when another reset is in progress
scsi: qedi: fix build, depends on UIO
scsi: scsi-mq: Wait for .queue_rq() if necessary
Pull input updates from Dmitry Torokhov:
"Small driver fixups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elants_i2c - avoid divide by 0 errors on bad touchscreen data
Input: adxl34x - make it enumerable in ACPI environment
Input: ALPS - fix TrackStick Y axis handling for SS5 hardware
Input: synaptics-rmi4 - fix F03 build error when serio is module
Input: xpad - use correct product id for x360w controllers
Input: synaptics_i2c - change msleep to usleep_range for small msecs
Input: i8042 - add Pegatron touchpad to noloop table
Input: joydev - remove unused linux/miscdevice.h include
Using has_capability() rather than ns_capable(), we're no longer using
this header.
Cc: Jike Song <jike.song@intel.com>
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Before the mdev enhancement type1 iommu used capable() to test the
capability of current task; in the course of mdev development a
new requirement, testing for another task other than current, was
raised. ns_capable() was used for this purpose, however it still
tests current, the only difference is, in a specified namespace.
Fix it by using has_capability() instead, which tests the cap for
specified task in init_user_ns, the same namespace as capable().
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This time we got a few more fixes than the previous rc's, and the most
of commits were about ASoC. The only significant change in the core
side is the regression fix wrt the aux device list handling, and all
the rest are driver-specific small / trivial fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=gGt3
-----END PGP SIGNATURE-----
Merge tag 'sound-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This time we got a few more fixes than the previous rc's, and most of
commits were about ASoC.
The only significant change in the core side is the regression fix wrt
the aux device list handling, and all the rest are driver-specific
small / trivial fixes"
* tag 'sound-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add a quirk for Plantronics BT600
ASoC: rt5645: set sel_i2s_pre_div1 to 2
ASoC: dpcm: Avoid putting stream state to STOP when FE stream is paused
ASoC: Intel: Skylake: Release FW ctx in cleanup
ASoC: Intel: bytcr-rt5640: fix settings in internal clock mode
ASoC: fsl_ssi: set fifo watermark to more reliable value
ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLL
ASoC: nau8825: correct the function name of register
ASoC: Intel: Skylake: Fix to fail safely if module not available in path
ASoC: tlv320aic3x: Mark the RESET register as volatile
ASoC: Fix binding and probing of auxiliary components
ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data
ASoC: Intel: bytcr_rt5640: fallback mechanism if MCLK is not enabled
ASoC: hdmi-codec: use unsigned type to structure members with bit-field
ASoC: topology: kfree kcontrol->private_value before freeing kcontrol
ASoC: rsnd: don't double free kctrl
ASoC: dwc: Fix PIO mode initialization
- Fix free space request handling when low on disk space
- Remove redundant log failure error messages
- Free truncate dirty pages instead of letting them build up forever
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCgAGBQJYdnh5AAoJEPh/dxk0SrTrI5sP/2FYAxrj3Iw684e92PWeIe1c
pZir+0LEmlXgly4wprli7/BO6WZjESuMF3huBZZxtYLx3UUvGRavHup620z3Xa2e
YRdSiBnvchOe3F0UfFO9wT15vEOzwWS61FfX/g35t4mD6ItY0XISesTx4+XA3Cqi
8zf7OAjXI5WQietthwc9zmfhpyWgyw8CkeXVtqd5whNJN/6E80wh5IE6D6cJ1xkX
2qNicrrruTUACPyJxrTrR/0kkoxDoYgBapy3kqV0R1uK+ttNrGlGjfdapKs0tqMb
ezksj0sy/rx+HjfGEHx52mTiYRRTHEsGt/yMa1pT8o0p2wvR0nxnvzkvV8DeMoX3
0wYRxATsv/t8Oog+ug6khB/FtppSGJML+XxG3bV9itgCkAIFAbb7vZRrThnzVqOr
ChbQvBhchY4lYA1pef862QHLRraJF84HuY/ypyE6DX+nQWkGjDfEeHFPcm6eVSXG
xEplK8wjs09pSklH/OQD+GsO4eedBHc4hdzDuBTjCmt867/Lk8Uw4RIjGMYjbBx2
ovU3pTHfdlO6/qJmfSWnBAAZjKAjna/p47ZfDLzio23hb1hK68Qe/z8+tPnAzkHW
rowA6KfBi13tX6Njds/lceiYMrnMRPqNBA+Og1wCyljP2Q4shbADa6czrFDzPn6P
xZbfhKK2CTbYSvxi5S3G
=8bsr
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.10-rc4-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"As promised last week, here's some stability fixes from Christoph and
Jan Kara:
- fix free space request handling when low on disk space
- remove redundant log failure error messages
- free truncated dirty pages instead of letting them build up
forever"
* tag 'xfs-for-linus-4.10-rc4-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Timely free truncated dirty pages
xfs: don't print warnings when xfs_log_force fails
xfs: don't rely on ->total in xfs_alloc_space_available
xfs: adjust allocation length in xfs_alloc_space_available
xfs: fix bogus minleft manipulations
xfs: bump up reserved blocks in xfs_alloc_set_aside
This fixes two regressions that has been reported to be introduced in
v4.10-rc1.
* The first fix corrects an incorrect usage of the kref api.
* The second reverts the change to make the resource table read-only. As the
space each vdev resource is used as virtio device config space it must be
shared with the remote.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=GUNc
-----END PGP SIGNATURE-----
Merge tag 'rproc-v4.10-fixes' of git://github.com/andersson/remoteproc
Pull remoteproc fixes from Bjorn Andersson:
"This fixes two regressions that have been reported to be introduced in
v4.10-rc1.
- correct an incorrect usage of the kref api
- revert the change to make the resource table read-only. As the
space each vdev resource is used as virtio device config space it
must be shared with the remote"
* tag 'rproc-v4.10-fixes' of git://github.com/andersson/remoteproc:
Revert "remoteproc: Merge table_ptr and cached_table pointers"
remoteproc: fix vdev reference management
This fixes a regression introduced in v4.10-rc1 that prohibits multiple
channels with the same name but different endpoint addresses to be used.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xcek
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v4.10-fixes' of git://github.com/andersson/remoteproc
Pull rpmsg fixes from Bjorn Andersson:
"This fixes a regression introduced in v4.10-rc1 that prohibits
multiple channels with the same name but different endpoint addresses
to be used"
* tag 'rpmsg-v4.10-fixes' of git://github.com/andersson/remoteproc:
rpmsg: virtio_rpmsg_bus: fix channel creation
Pull HID fixes from Jiri Kosina:
- device descriptor length validation fix to hid-cypress driver from
Greg
- introduction of a short delay into i2c-hid, which is not really
mandated by the spec, but fixes Asus Touchpads
- Petzl USB connectable flashlight quirk from myself
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: i2c-hid: Add sleep between POWER ON and RESET
HID: hid-cypress: validate length of report
HID: ignore Petzl USB headlamp
Pull scsi target fixes from Bart Van Assche:
- a series of bug fixes for the XCOPY implementation from David
Disseldorp
- one bug fix for the ibmvscsis driver, a driver that is used for
communication between partitions on IBM POWER systems.
* 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux:
ibmvscsis: Fix srp_transfer_data fail return code
target: support XCOPY requests without parameters
target: check for XCOPY parameter truncation
target: use XCOPY segment descriptor CSCD IDs
target: check XCOPY segment descriptor CSCD IDs
target: simplify XCOPY wwn->se_dev lookup helper
target: return UNSUPPORTED TARGET/SEGMENT DESC TYPE CODE sense
target: bounds check XCOPY total descriptor list length
target: bounds check XCOPY segment descriptor list
target: use XCOPY TOO MANY TARGET DESCRIPTORS sense
target: add XCOPY target/segment desc sense codes
For no snapshot case, we should use ci->truncate_{seq,size}.
Fixes: 5f743e4566 ("ceph: record truncate size/seq for snap data writeback")
Signed-off-by: Geng, Jichao <geng.jichao@h3c.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
We should apply the check after getting the initial mdsmap.
Fixes: e9e427f0a1 ("ceph: check availability of mds cluster on mount")
Link: http://tracker.ceph.com/issues/18161
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Pull md fixes from Shaohua Li:
"Basically one fix for raid5 cache which is merged in this cycle,
others are trival fixes"
* tag 'md/4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md/raid5: Use correct IS_ERR() variation on pointer check
md: cleanup mddev flag clear for takeover
md/r5cache: fix spelling mistake on "recoverying"
md/r5cache: assign conf->log before r5l_load_log()
md/r5cache: simplify handling of sh->log_start in recovery
md/raid5-cache: removes unnecessary write-through mode judgments
md/raid10: Refactor raid10_make_request
md/raid1: Refactor raid1_make_request
When CONFIG_RANDOMIZE_MODULE_REGION_FULL=y, the offset between loaded
modules and the core kernel may exceed 4 GB, putting symbols exported
by the core kernel out of the reach of the ordinary adrp/add instruction
pairs used to generate relative symbol references. So make the adr_l
macro emit a movz/movk sequence instead when executing in module context.
While at it, remove the pointless special case for the stack pointer.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This is CVE-2017-2583. On Intel this causes a failed vmentry because
SS's type is neither 3 nor 7 (even though the manual says this check is
only done for usable SS, and the dmesg splat says that SS is unusable!).
On AMD it's worse: svm.c is confused and sets CPL to 0 in the vmcb.
The fix fabricates a data segment descriptor when SS is set to a null
selector, so that CPL and SS.DPL are set correctly in the VMCS/vmcb.
Furthermore, only allow setting SS to a NULL selector if SS.RPL < 3;
this in turn ensures CPL < 3 because RPL must be equal to CPL.
Thanks to Andy Lutomirski and Willy Tarreau for help in analyzing
the bug and deciphering the manuals.
Reported-by: Xiaohan Zhang <zhangxiaohan1@huawei.com>
Fixes: 79d5b4c3cd
Cc: stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
has_capability() is sometimes needed by modules to test capability
for specified task other than current, so export it.
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reported syzkaller:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass]
PGD 0
Oops: 0002 [#1] SMP
CPU: 1 PID: 125 Comm: kworker/1:1 Not tainted 4.9.0+ #1
Workqueue: kvm-irqfd-cleanup irqfd_shutdown [kvm]
task: ffff9bbe0dfbb900 task.stack: ffffb61802014000
RIP: 0010:irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass]
Call Trace:
irqfd_shutdown+0x66/0xa0 [kvm]
process_one_work+0x16b/0x480
worker_thread+0x4b/0x500
kthread+0x101/0x140
? process_one_work+0x480/0x480
? kthread_create_on_node+0x60/0x60
ret_from_fork+0x25/0x30
RIP: irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass] RSP: ffffb61802017e20
CR2: 0000000000000008
The syzkaller folks reported a NULL pointer dereference that due to
unregister an consumer which fails registration before. The syzkaller
creates two VMs w/ an equal eventfd occasionally. So the second VM
fails to register an irqbypass consumer. It will make irqfd as inactive
and queue an workqueue work to shutdown irqfd and unregister the irqbypass
consumer when eventfd is closed. However, the second consumer has been
initialized though it fails registration. So the token(same as the first
VM's) is taken to unregister the consumer through the workqueue, the
consumer of the first VM is found and unregistered, then NULL deref incurred
in the path of deleting consumer from the consumers list.
This patch fixes it by making irq_bypass_register/unregister_consumer()
looks for the consumer entry based on consumer pointer itself instead of
token matching.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduces segemented_write_std.
Switches from emulated reads/writes to standard read/writes in fxsave,
fxrstor, sgdt, and sidt. This fixes CVE-2017-2584, a longstanding
kernel memory leak.
Since commit 283c95d0e3 ("KVM: x86: emulate FXSAVE and FXRSTOR",
2016-11-09), which is luckily not yet in any final release, this would
also be an exploitable kernel memory *write*!
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: 96051572c8
Fixes: 283c95d0e3
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM's lapic emulation uses static_key_deferred (apic_{hw,sw}_disabled).
These are implemented with delayed_work structs which can still be
pending when the KVM module is unloaded. We've seen this cause kernel
panics when the kvm_intel module is quickly reloaded.
Use the new static_key_deferred_flush() API to flush pending updates on
module unload.
Signed-off-by: David Matlack <dmatlack@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modules that use static_key_deferred need a way to synchronize with
any delayed work that is still pending when the module is unloaded.
Introduce static_key_deferred_flush() which flushes any pending
jump label updates.
Signed-off-by: David Matlack <dmatlack@google.com>
Cc: stable@vger.kernel.org
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Support for the Asus Touchpad was recently added. It turns out this
device can fail initialisation (and become unusable) when the RESET
command is sent too soon after the POWER ON command.
Unfortunately the i2c-hid specification does not specify the need for
a delay between these two commands. But it was discovered the Windows
driver has a 1ms delay.
As a result, this patch modifies the i2c-hid module to add a sleep
inbetween the POWER ON and RESET commands which lasts between 1ms and 5ms.
See https://github.com/vlasenko/hid-asus-dkms/issues/24 for further
details.
Signed-off-by: Brendan McGrath <redmcg@redmandi.dyndns.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Merge fixes from Andrew Morton:
"27 fixes.
There are three patches that aren't actually fixes. They're simple
function renamings which are nice-to-have in mainline as ongoing net
development depends on them."
* akpm: (27 commits)
timerfd: export defines to userspace
mm/hugetlb.c: fix reservation race when freeing surplus pages
mm/slab.c: fix SLAB freelist randomization duplicate entries
zram: support BDI_CAP_STABLE_WRITES
zram: revalidate disk under init_lock
mm: support anonymous stable page
mm: add documentation for page fragment APIs
mm: rename __page_frag functions to __page_frag_cache, drop order from drain
mm: rename __alloc_page_frag to page_frag_alloc and __free_page_frag to page_frag_free
mm, memcg: fix the active list aging for lowmem requests when memcg is enabled
mm: don't dereference struct page fields of invalid pages
mailmap: add codeaurora.org names for nameless email commits
signal: protect SIGNAL_UNKILLABLE from unintentional clearing.
mm: pmd dirty emulation in page fault handler
ipc/sem.c: fix incorrect sem_lock pairing
lib/Kconfig.debug: fix frv build failure
mm: get rid of __GFP_OTHER_NODE
mm: fix remote numa hits statistics
mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}
ocfs2: fix crash caused by stale lvb with fsdlm plugin
...
We set info.count to 1 in mtty_get_irq_info() so static checkers
complain that, "Why do we have impossible conditions?" The answer is
that it seems to be left over dead code that can be safely removed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is a sample driver for documentation so the impact is probably
pretty low. But we should check that bar_index is valid so we
don't write beyond the end of the mdev_state->region_info[] array.
Fixes: 9d1a546c53 ("docs: Sample driver to demonstrate how to use Mediated device framework.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The copy_to_user() function returns the number of bytes which it wasn't
able to copy but we want to return a negative error code.
Fixes: 9d1a546c53 ("docs: Sample driver to demonstrate how to use Mediated device framework.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As well as the usual smattering of driver specific fixes collected since
the merge window this has one particularly important fix to the core for
handling of aux_devs which was broken during the merge window by some of
the componentization refactoring.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlh2as0THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LBrB/92Z6gD0GrbQjP6LkMJ0SwmAMjWOOy+
hDTr8m9CNwSHwQW/L+rAnyS8WBB46jiJ4/mTw6Sz7YIyY0Xdv5RY7IPPuWC92JQd
jA+0lcfGe0p86ZvVhK2tye+EHTBqKgfIzO2Sl5XNzaQZiw0S8g/FjJIjBABOGkty
oyK2iYHAW5H7aNVZfoXR9QQBqWniSh5hh06tCDs7Gy90zlKSOoWDUUfux5pubzVR
mXOxTnie6bU7Rf0IKzdAQ5EI3zt2XT3XtFgv47VYp4bKW8LbkSo8JCVORGymoq+c
k+Oc8YPbpAY5Jh4tZ9tSup1Ce7DJvE1sf4VOuHkAoXjKO+Pjp+/qTo50
=KUQm
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.10
As well as the usual smattering of driver specific fixes collected since
the merge window this has one particularly important fix to the core for
handling of aux_devs which was broken during the merge window by some of
the componentization refactoring.
Commit 99579ccec4 "xfs: skip dirty pages in ->releasepage()" started
to skip dirty pages in xfs_vm_releasepage() which also has the effect
that if a dirty page is truncated, it does not get freed by
block_invalidatepage() and is lingering in LRU list waiting for reclaim.
So a simple loop like:
while true; do
dd if=/dev/zero of=file bs=1M count=100
rm file
done
will keep using more and more memory until we hit low watermarks and
start pagecache reclaim which will eventually reclaim also the truncate
pages. Keeping these truncated (and thus never usable) pages in memory
is just a waste of memory, is unnecessarily stressing page cache
reclaim, and reportedly also leads to anonymous mmap(2) returning ENOMEM
prematurely.
So instead of just skipping dirty pages in xfs_vm_releasepage(), return
to old behavior of skipping them only if they have delalloc or unwritten
buffers and fix the spurious warnings by warning only if the page is
clean.
CC: stable@vger.kernel.org
CC: Brian Foster <bfoster@redhat.com>
CC: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Petr Tůma <petr.tuma@d3s.mff.cuni.cz>
Fixes: 99579ccec4
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Pull networking fixes from David Miller:
1) Fix rtlwifi crash, from Larry Finger.
2) Memory disclosure in appletalk ipddp routing code, from Vlad
Tsyrklevich.
3) r8152 can erroneously split an RX packet into multiple URBs if the
Rx FIFO is not empty when we suspend. Fix this by waiting for the
FIFO to empty before suspending. From Hayes Wang.
4) Two GRO fixes (enter slow path when not enough SKB tail room exists,
disable frag0 optimizations when there are IPV6 extension headers)
from Eric Dumazet and Herbert Xu.
5) A series of mlx5e bug fixes (do source udp port offloading for
tunnels properly, Ip fragment matching fixes, handling firmware
errors properly when installing TC rules, etc.) from Saeed Mahameed,
Or Gerlitz, Roi Dayan, Hadar Hen Zion, Gil Rockah, and Daniel
Jurgens.
6) Two VRF fixes from David Ahern (don't skip multipath selection for
VRF paths, disallow VRF to be configured with table ID 0).
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
net: vrf: do not allow table id 0
net: phy: marvell: fix Marvell 88E1512 used in SGMII mode
sctp: Fix spelling mistake: "Atempt" -> "Attempt"
net: ipv4: Fix multipath selection with vrf
cgroup: move CONFIG_SOCK_CGROUP_DATA to init/Kconfig
gro: use min_t() in skb_gro_reset_offset()
net/mlx5: Only cancel recovery work when cleaning up device
net/mlx5e: Remove WARN_ONCE from adaptive moderation code
net/mlx5e: Un-register uplink representor on nic_disable
net/mlx5e: Properly handle FW errors while adding TC rules
net/mlx5e: Fix kbuild warnings for uninitialized parameters
net/mlx5e: Set inline mode requirements for matching on IP fragments
net/mlx5e: Properly get address type of encapsulation IP headers
net/mlx5e: TC ipv4 tunnel encap offload error flow fixes
net/mlx5e: Warn when rejecting offload attempts of IP tunnels
net/mlx5e: Properly handle offloading of source udp port for IP tunnels
gro: Disable frag0 optimization on IPv6 ext headers
gro: Enter slow-path if there is no tailroom
mlx4: Return EOPNOTSUPP instead of ENOTSUPP
net/af_iucv: don't use paged skbs for TX on HiperSockets
...
Pull crypto fix from Herbert Xu:
"This fixes a regression in aesni that renders it useless if it's
built-in with a modular pcbc configuration"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: aesni - Fix failure when built-in with modular pcbc
Frank reported that vrf devices can be created with a table id of 0.
This breaks many of the run time table id checks and should not be
allowed. Detect this condition at create time and fail with EINVAL.
Fixes: 193125dbd8 ("net: Introduce VRF device driver")
Reported-by: Frank Kellermann <frank.kellermann@atos.net>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an Marvell 88E1512 PHY is connected to a nic in SGMII mode, the
fiber page is used for the SGMII host-side connection. The PHY driver
notices that SUPPORTED_FIBRE is set, so it tries reading the fiber page
for the link status, and ends up reading the MAC-side status instead of
the outgoing (copper) link. This leads to incorrect results reported
via ethtool.
If the PHY is connected via SGMII to the host, ignore the fiber page.
However, continue to allow the existing power management code to
suspend and resume the fiber page.
Fixes: 6cfb3bcc06 ("Marvell phy: check link status in case of fiber link.")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial fix to spelling mistake in WARN_ONCE message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Brandt